summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-14net: dev: Change the order of the arguments for the contended condition.Sebastian Andrzej Siewior
Change the order of arguments and make qdisc_is_running() appear first. This is more readable for the general case. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14flow_offload: return EOPNOTSUPP for the unsupported mpls action typeBaowen Zheng
We need to return EOPNOTSUPP for the unsupported mpls action type when setup the flow action. In the original implement, we will return 0 for the unsupported mpls action type, actually we do not setup it and the following actions to the flow action entry. Fixes: 9838b20a7fb2 ("net: sched: take rtnl lock in tc_setup_flow_action()") Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14mmc: sdhci-tegra: Fix switch to HS400ES modePrathamesh Shete
When CMD13 is sent after switching to HS400ES mode, the bus is operating at either MMC_HIGH_26_MAX_DTR or MMC_HIGH_52_MAX_DTR. To meet Tegra SDHCI requirement at HS400ES mode, force SDHCI interface clock to MMC_HS200_MAX_DTR (200 MHz) so that host controller CAR clock and the interface clock are rate matched. Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: dfc9700cef77 ("mmc: tegra: Implement HS400 enhanced strobe") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211214113653.4631-1-pshete@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-14net: stmmac: fix tc flower deletion for VLAN priority Rx steeringOng Boon Leong
To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue. Fixes: 0e039f5cf86c ("net: stmmac: add RX frame steering based on VLAN priority in tc flower") Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14Merge branch 'hwtstamp_bonding'David S. Miller
Hangbin Liu says: ==================== net: add new hwtstamp flag HWTSTAMP_FLAG_BONDED_PHC_INDEX This patchset add a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When user want to get bond active interface's PHC, they need to add this flag and aware the PHC index may changed. v3: Use bitwise test to check the flags validation v2: rename the flag to HWTSTAMP_FLAG_BONDED_PHC_INDEX ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14Bonding: force user to add HWTSTAMP_FLAG_BONDED_PHC_INDEX when get/set HWTSTAMPHangbin Liu
When there is a failover, the PHC index of bond active interface will be changed. This may break the user space program if the author didn't aware. By setting this flag, the user should aware that the PHC index get/set by syscall is not stable. And the user space is able to deal with it. Without this flag, the kernel will reject the request forwarding to bonding. Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on errorThomas Gleixner
PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X interrupt setup time. It's cleared on success, but the error handling path only clears the PCI_MSIX_FLAGS_ENABLE bit. That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is zero. That can be observed via lspci: Capabilities: [b0] MSI-X: Enable- Count=67 Masked+ Clear the bit in the error path to restore the reset state. Fixes: 438553958ba1 ("PCI/MSI: Enable and mask MSI-X early") Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Stefan Roese <sr@denx.de> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglx
2021-12-14PCI/MSI: Mask MSI-X vectors only on successStefan Roese
Masking all unused MSI-X entries is done to ensure that a crash kernel starts from a clean slate, which correponds to the reset state of the device as defined in the PCI-E specificion 3.0 and later: Vector Control for MSI-X Table Entries -------------------------------------- "00: Mask bit: When this bit is set, the function is prohibited from sending a message using this MSI-X Table entry. ... This bit’s state after reset is 1 (entry is masked)." A Marvell NVME device fails to deliver MSI interrupts after trying to enable MSI-X interrupts due to that masking. It seems to take the MSI-X mask bits into account even when MSI-X is disabled. While not specification compliant, this can be cured by moving the masking into the success path, so that the MSI-X table entries stay in device reset state when the MSI-X setup fails. [ tglx: Move it into the success path, add comment and amend changelog ] Fixes: aa8092c1d1f1 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211210161025.3287927-1-sr@denx.de
2021-12-14powerpc/module_64: Fix livepatching for RO modulesRussell Currey
Livepatching a loaded module involves applying relocations through apply_relocate_add(), which attempts to write to read-only memory when CONFIG_STRICT_MODULE_RWX=y. Work around this by performing these writes through the text poke area by using patch_instruction(). R_PPC_REL24 is the only relocation type generated by the kpatch-build userspace tool or klp-convert kernel tree that I observed applying a relocation to a post-init module. A more comprehensive solution is planned, but using patch_instruction() for R_PPC_REL24 on should serve as a sufficient fix. This does have a performance impact, I observed ~15% overhead in module_load() on POWER8 bare metal with checksum verification off. Fixes: c35717c71e98 ("powerpc: Set ARCH_HAS_STRICT_MODULE_RWX") Cc: stable@vger.kernel.org # v5.14+ Reported-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Russell Currey <ruscur@russell.cc> Tested-by: Joe Lawrence <joe.lawrence@redhat.com> [mpe: Check return codes from patch_instruction()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211214121248.777249-1-mpe@ellerman.id.au
2021-12-14mac80211: do drv_reconfig_complete() before restarting allJohannes Berg
When we reconfigure, the driver might do some things to complete the reconfiguration. It's strange and could be broken in some cases because we restart other works (e.g. remain-on-channel and TX) before this happens, yet only start queues later. Change this to do the reconfig complete when reconfiguration is actually complete, not when we've already started doing other things again. For iwlwifi, this should fix a race where the reconfig can race with TX, for ath10k and ath11k that also use this it won't make a difference because they just start queues there, and mac80211 also stopped the queues and will restart them later as before. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.cab99f22fe19.Iefe494687f15fd85f77c1b989d1149c8efdfdc36@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: mark TX-during-stop for TX in in_reconfigJohannes Berg
Mark TXQs as having seen transmit while they were stopped if we bail out of drv_wake_tx_queue() due to reconfig, so that the queue wake after this will make them catch up. This is particularly necessary for when TXQs are used for management packets since those TXQs won't see a lot of traffic that'd make them catch up later. Cc: stable@vger.kernel.org Fixes: 4856bfd23098 ("mac80211: do not call driver wake_tx_queue op during reconfig") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.4573a221c0e1.I0d1d5daea3089be3fc0dccc92991b0f8c5677f0c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: update channel context before station stateMordechay Goodstein
Currently channel context is updated only after station got an update about new assoc state, this results in station using the old channel context. Fix this by moving the update channel context before updating station, enabling the driver to immediately use the updated channel context in the new assoc state. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.1c80c17ffd8a.I94ae31378b363c1182cfdca46c4b7e7165cff984@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: Fix the size used for building probe requestIlan Peer
Instead of using the hard-coded value of '100' use the correct scan IEs length as calculated during HW registration to mac80211. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.0a82d6891719.I8ded1f2e0bccb9e71222c945666bcd86537f2e35@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: fix lookup when adding AddBA extension elementJohannes Berg
We should be doing the HE capabilities lookup based on the full interface type so if P2P doesn't have HE but client has it doesn't get confused. Fix that. Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.010fc1d61137.If3a468145f29d670cb00a693bed559d8290ba693@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: validate extended element ID is presentJohannes Berg
Before attempting to parse an extended element, verify that the extended element ID is present. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Reported-by: syzbot+59bdff68edce82e393b6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211211201023.f30a1b128c07.I5cacc176da94ba316877c6e10fe3ceec8b4dbd7d@changeid Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14cfg80211: Acquire wiphy mutex on regulatory workIlan Peer
The function cfg80211_reg_can_beacon_relax() expects wiphy mutex to be held when it is being called. However, when reg_leave_invalid_chans() is called the mutex is not held. Fix it by acquiring the lock before calling the function. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211202152831.527686cda037.I40ad9372a47cbad53b4aae7b5a6ccc0dc3fddf8b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: agg-tx: don't schedule_and_wake_txq() under sta->lockJohannes Berg
When we call ieee80211_agg_start_txq(), that will in turn call schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb() this is done under sta->lock, which leads to certain circular lock dependencies, as reported by Chris Murphy: https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com In general, ieee80211_agg_start_txq() is usually not called with sta->lock held, only in this one place. But it's always called with sta->ampdu_mlme.mtx held, and that's therefore clearly sufficient. Change ieee80211_stop_tx_ba_cb() to also call it without the sta->lock held, by factoring it out of ieee80211_remove_tid_tx() (which is only called in this one place). This breaks the locking chain and makes it less likely that we'll have similar locking chain problems in the future. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211202152554.f519884c8784.I555fef8e67d93fff3d9a304886c4a9f8b322e591@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14nl80211: remove reload flag from regulatory_requestFinn Behrens
This removes the previously unused reload flag, which was introduced in 1eda919126b4. The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed unconditionally. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: 1eda919126b4 ("nl80211: reset regdom when reloading regdb") Link: https://lore.kernel.org/all/YaZuKYM5bfWe2Urn@archlinux-ax161/ Signed-off-by: Finn Behrens <me@kloenk.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/YadvTolO8rQcNCd/@gimli.kloenk.dev Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: send ADDBA requests using the tid/queue of the aggregation sessionFelix Fietkau
Sending them out on a different queue can cause a race condition where a number of packets in the queue may be discarded by the receiver, because the ADDBA request is sent too early. This affects any driver with software A-MPDU setup which does not allocate packet seqno in hardware on tx, regardless of whether iTXQ is used or not. The only driver I've seen that explicitly deals with this issue internally is mwl8k. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20211202124533.80388-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14ALSA: hda/realtek: Add new alc285-hp-amp-init modelBradley Scott
Adds a new "alc285-hp-amp-init" model that can be used to apply the ALC285 HP speaker amplifier initialization fixup to devices that are not already known by passing "hda_model=alc285-hp-amp-init" to the snd-sof-intel-hda-common module or "model=alc285-hp-amp-init" to the snd-hda-intel module, depending on which is being used. Signed-off-by: Bradley Scott <bscott@teksavvy.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211213162246.506838-1-bscott@teksavvy.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-12-14ALSA: hda/realtek: Amp init fixup for HP ZBook 15 G6Bradley Scott
HP ZBook 15 G6 (SSID 103c:860f) needs the same speaker amplifier initialization as used on several other HP laptops using ALC285. Signed-off-by: Bradley Scott <Bradley.Scott@zebra.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211213154938.503201-1-Bradley.Scott@zebra.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-12-14drm/i915/display: Fix an unsigned subtraction which can never be negative.Harshit Mogalapalli
smatch warning: drivers/gpu/drm/i915/display/intel_dmc.c:601 parse_dmc_fw() warn: unsigned 'fw->size - offset' is never less than zero Firmware size is size_t and offset is u32. So the subtraction is unsigned which can never be less than zero. Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211210044129.12422-1-harshit.m.mogalapalli@oracle.com (cherry picked from commit 87bb2a410dcfb617b88e4695edf4beb6336dc314) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-12-14USB: serial: option: add Telit FN990 compositionsDaniele Palmas
Add the following Telit FN990 compositions: 0x1070: tty, adb, rmnet, tty, tty, tty, tty 0x1071: tty, adb, mbim, tty, tty, tty, tty 0x1072: rndis, tty, adb, tty, tty, tty, tty 0x1073: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211210100714.22587-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-12-14USB: serial: cp210x: fix CP2105 GPIO registrationJohan Hovold
When generalising GPIO support and adding support for CP2102N, the GPIO registration for some CP2105 devices accidentally broke. Specifically, when all the pins of a port are in "modem" mode, and thus unavailable for GPIO use, the GPIO chip would now be registered without having initialised the number of GPIO lines. This would in turn be rejected by gpiolib and some errors messages would be printed (but importantly probe would still succeed). Fix this by initialising the number of GPIO lines before registering the GPIO chip. Note that as for the other device types, and as when all CP2105 pins are muxed for LED function, the GPIO chip is registered also when no pins are available for GPIO use. Reported-by: Maarten Brock <m.brock@vanmierlo.com> Link: https://lore.kernel.org/r/5eb560c81d2ea1a2b4602a92d9f48a89@vanmierlo.com Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N") Cc: stable@vger.kernel.org # 4.19 Cc: Karoly Pados <pados@pados.hu> Link: https://lore.kernel.org/r/20211126094348.31698-1-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-12-14drm/ast: potential dereference of null pointerJiasheng Jiang
The return value of kzalloc() needs to be checked. To avoid use of null pointer '&ast_state->base' in case of the failure of alloc. Fixes: f0adbc382b8b ("drm/ast: Allocate initial CRTC state of the correct size") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211214014126.2211535-1-jiasheng@iscas.ac.cn
2021-12-13scsi: pm8001: Fix phys_to_virt() usage on dma_addr_tJohn Garry
The driver supports a "direct" mode of operation, where the SMP req frame is directly copied into the command payload (and vice-versa for the SMP resp). To get at the SMP req frame data in the scatterlist the driver uses phys_to_virt() on the DMA mapped memory dma_addr_t . This is broken, and subsequently crashes as follows when an IOMMU is enabled: Unable to handle kernel paging request at virtual address ffff0000fcebfb00 ... pc : pm80xx_chip_smp_req+0x2d0/0x3d0 lr : pm80xx_chip_smp_req+0xac/0x3d0 pm80xx_chip_smp_req+0x2d0/0x3d0 pm8001_task_exec.constprop.0+0x368/0x520 pm8001_queue_command+0x1c/0x30 smp_execute_task_sg+0xdc/0x204 sas_discover_expander.part.0+0xac/0x6cc sas_discover_root_expander+0x8c/0x150 sas_discover_domain+0x3ac/0x6a0 process_one_work+0x1d0/0x354 worker_thread+0x13c/0x470 kthread+0x17c/0x190 ret_from_fork+0x10/0x20 Code: 371806e1 910006d6 6b16033f 54000249 (38766b05) ---[ end trace b91d59aaee98ea2d ]--- note: kworker/u192:0[7] exited with preempt_count 1 Instead use kmap_atomic(). -- Difference to v1: - use kmap_atomic() in both locations Difference to v2: - add whitespace around arithmetic (Damien) Link: https://lore.kernel.org/r/1639390248-213603-1-git-send-email-john.garry@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-13mptcp: never allow the PM to close a listener subflowPaolo Abeni
Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status. Reported-and-tested-by: syzbot+e4d843bb96a9431e6331@syzkaller.appspotmail.com Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Fixes: 740d798e8767 ("mptcp: remove id 0 address") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/ebc7594cdd420d241fb2172ddb8542ba64717657.1639238695.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-13RDMA/mlx5: Add support to multiple priorities for FDB rulesMaor Gottlieb
Currently, the driver ignores the user's priority for flow steering rules in FDB namespace. Change it and create the rule in the right priority. It will allow to create FDB steering rules in up to 16 different priorities. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-13net/mlx5: Create more priorities for FDB bypass namespaceMaor Gottlieb
Create 16 flow steering priorities for FDB bypass users. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-13net/mlx5: Refactor mlx5_get_flow_namespaceMaor Gottlieb
Have all the namespace type check in the same switch case. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-13net/mlx5: Separate FDB namespaceMaor Gottlieb
This patch doesn't add an additional namespaces, but just separates the naming to be used by each FDB user, bypass and kernel. Downstream patches will actually split this up and allow to have more than single priority for the bypass users. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14xsk: Wipe out dead zero_copy_allocator declarationsMaciej Fijalkowski
zero_copy_allocator has been removed back when Bjorn Topel introduced xsk_buff_pool. Remove references to it that were dangling in the tree. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20211210171511.11574-1-maciej.fijalkowski@intel.com
2021-12-13Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Misc virtio and vdpa bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa: Consider device id larger than 31 virtio/vsock: fix the transport to work with VMADDR_CID_ANY virtio_ring: Fix querying of maximum DMA mapping size for virtio device virtio: always enter drivers/virtio/ vduse: check that offset is within bounds in get_config() vdpa: check that offsets are within bounds vduse: fix memory corruption in vduse_dev_ioctl()
2021-12-13libbpf: Add doc comments for bpf_program__(un)pin()Grant Seltzer
This adds doc comments for the two bpf_program pinning functions, bpf_program__pin() and bpf_program__unpin() Signed-off-by: Grant Seltzer <grantseltzer@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211209232222.541733-1-grantseltzer@gmail.com
2021-12-13selftests/bpf: Fix segfault in bpf_tcp_caJean-Philippe Brucker
Since commit ad9a7f96445b ("libbpf: Improve logging around BPF program loading"), libbpf_debug_print() gets an additional prog_name parameter but doesn't pass it to printf(). Since the format string now expects two arguments, printf() may read uninitialized data and segfault. Pass prog_name through. Fixes: ad9a7f96445b ("libbpf: Improve logging around BPF program loading") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211213183058.346066-1-jean-philippe@linaro.org
2021-12-13bpf: Let bpf_warn_invalid_xdp_action() report more infoPaolo Abeni
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-12-13bpf: Do not WARN in bpf_warn_invalid_xdp_action()Paolo Abeni
The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by any bugged program, and even attaching a correct program to a NIC not supporting the given action. The resulting splat, beyond polluting the logs, fouls automated tools: e.g. a syzkaller reproducers using an XDP program returning an unsupported action will never pass validation. Replace the WARN_ONCE with a less intrusive pr_warn_once(). Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com
2021-12-13ASoC: tegra: Restore headphones jack name on Nyan BigDmitry Osipenko
UCM of Acer Chromebook (Nyan) uses a different name for the headphones jack. The name was changed during unification of the machine drivers and UCM fails now to load because of that. Restore the old jack name. Cc: <stable@vger.kernel.org> Fixes: cc8f70f ("ASoC: tegra: Unify ASoC machine drivers") Reported-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211211231146.6137-2-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-13ASoC: tegra: Add DAPM switches for headphones and mic jackDmitry Osipenko
UCM of Acer Chromebook (Nyan) uses DAPM switches of headphones and mic jack. These switches were lost by accident during unification of the machine drivers, restore them. Cc: <stable@vger.kernel.org> Fixes: cc8f70f ("ASoC: tegra: Unify ASoC machine drivers") Reported-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211211231146.6137-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-13PCI: mt7621: Convert driver into 'bool'Sergio Paracuellos
The driver is not ready yet to be compiled as a module since it depends on some symbols not exported on MIPS. We have the following current problems: Building mips:allmodconfig ... failed -------------- Error log: ERROR: modpost: missing MODULE_LICENSE() in drivers/pci/controller/pcie-mt7621.o ERROR: modpost: "mips_cm_unlock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined! ERROR: modpost: "mips_cpc_base" [drivers/pci/controller/pcie-mt7621.ko] undefined! ERROR: modpost: "mips_cm_lock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined! ERROR: modpost: "mips_cm_is64" [drivers/pci/controller/pcie-mt7621.ko] undefined! ERROR: modpost: "mips_gcr_base" [drivers/pci/controller/pcie-mt7621.ko] undefined! Temporarily move from 'tristate' to 'bool' until a better solution is ready. Also RALINK is redundant because SOC_MT7621 already depends on it. Hence, simplify condition. Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver"). Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-and-Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-13brcmfmac: Fix incorrect type assignments for keep-aliveLoic Poulain
cpu_to_le16 has been used for all keep-alive fields, but 'perdio_msec' is a 32-bit field and 'keep_alive_id' a 8-bit one. Fix that. Fixes: 7a6cfe28ae3e ("brcmfmac: Configure keep-alive packet on suspend") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1638953708-29192-1-git-send-email-loic.poulain@linaro.org
2021-12-13fget: clarify and improve __fget_files() implementationLinus Torvalds
Commit 054aa8d439b9 ("fget: check that the fd still exists after getting a ref to it") fixed a race with getting a reference to a file just as it was being closed. It was a fairly minimal patch, and I didn't think re-checking the file pointer lookup would be a measurable overhead, since it was all right there and cached. But I was wrong, as pointed out by the kernel test robot. The 'poll2' case of the will-it-scale.per_thread_ops benchmark regressed quite noticeably. Admittedly it seems to be a very artificial test: doing "poll()" system calls on regular files in a very tight loop in multiple threads. That means that basically all the time is spent just looking up file descriptors without ever doing anything useful with them (not that doing 'poll()' on a regular file is useful to begin with). And as a result it shows the extra "re-check fd" cost as a sore thumb. Happily, the regression is fixable by just writing the code to loook up the fd to be better and clearer. There's still a cost to verify the file pointer, but now it's basically in the noise even for that benchmark that does nothing else - and the code is more understandable and has better comments too. [ Side note: this patch is also a classic case of one that looks very messy with the default greedy Myers diff - it's much more legible with either the patience of histogram diff algorithm ] Link: https://lore.kernel.org/lkml/20211210053743.GA36420@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/20211213083154.GA20853@linux.intel.com/ Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: Carel Si <beibei.si@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-13iavf: do not override the adapter state in the watchdog task (again)Stefan Assmann
The watchdog task incorrectly changes the state to __IAVF_RESETTING, instead of letting the reset task take care of that. This was already resolved by commit 22c8fd71d3a5 ("iavf: do not override the adapter state in the watchdog task") but the problem was reintroduced by the recent code refactoring in commit 45eebd62999d ("iavf: Refactor iavf state machine tracking"). Fixes: 45eebd62999d ("iavf: Refactor iavf state machine tracking") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-13Merge branch 'bpf: Add helpers to access traced function arguments'Alexei Starovoitov
Jiri Olsa says: ==================== Add new helpers to access traced function arguments that came out of the trampoline batch changes [1]. Get n-th argument of the traced function: long bpf_get_func_arg(void *ctx, u32 n, u64 *value) Get return value of the traced function: long bpf_get_func_ret(void *ctx, u64 *value) Get arguments count of the traced funtion: long bpf_get_func_arg_cnt(void *ctx) v2 changes: - added acks - updated stack diagram - return -EOPNOTSUPP instead of -EINVAL in bpf_get_func_ret - removed gpl_only for all helpers - added verifier fix to allow proper arguments checks, Andrii asked for checking also 'int *b' argument in bpf_modify_return_test programs and it turned out that it's currently not supported by verifier - we can't read argument that is int pointer, so I had to add verifier change to allow that + adding verifier selftest - checking all arguments in bpf_modify_return_test test programs - moved helpers proto gets in tracing_prog_func_proto with attach type check thanks, jirka [1] https://lore.kernel.org/bpf/20211118112455.475349-1-jolsa@kernel.org/ ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-12-13selftests/bpf: Add tests for get_func_[arg|ret|arg_cnt] helpersJiri Olsa
Adding tests for get_func_[arg|ret|arg_cnt] helpers. Using these helpers in fentry/fexit/fmod_ret programs. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211208193245.172141-6-jolsa@kernel.org
2021-12-13bpf: Add get_func_[arg|ret|arg_cnt] helpersJiri Olsa
Adding following helpers for tracing programs: Get n-th argument of the traced function: long bpf_get_func_arg(void *ctx, u32 n, u64 *value) Get return value of the traced function: long bpf_get_func_ret(void *ctx, u64 *value) Get arguments count of the traced function: long bpf_get_func_arg_cnt(void *ctx) The trampoline now stores number of arguments on ctx-8 address, so it's easy to verify argument index and find return value argument's position. Moving function ip address on the trampoline stack behind the number of functions arguments, so it's now stored on ctx-16 address if it's needed. All helpers above are inlined by verifier. Also bit unrelated small change - using newly added function bpf_prog_has_trampoline in check_get_func_ip. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211208193245.172141-5-jolsa@kernel.org
2021-12-13bpf, x64: Replace some stack_size usage with offset variablesJiri Olsa
As suggested by Andrii, adding variables for registers and ip address offsets, which makes the code more clear, rather than abusing single stack_size variable for everything. Also describing the stack layout in the comment. There is no function change. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211208193245.172141-4-jolsa@kernel.org
2021-12-13selftests/bpf: Add test to access int ptr argument in tracing programJiri Olsa
Adding verifier test for accessing int pointer argument in tracing programs. The test program loads 2nd argument of bpf_modify_return_test function which is int pointer and checks that verifier allows that. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211208193245.172141-3-jolsa@kernel.org
2021-12-13bpf: Allow access to int pointer arguments in tracing programsJiri Olsa
Adding support to access arguments with int pointer arguments in tracing programs. Currently we allow tracing programs to access only pointers to string (char pointer), void pointers and pointers to structs. If we try to access argument which is pointer to int, verifier will fail to load the program with; R1 type=ctx expected=fp ; int BPF_PROG(fmod_ret_test, int _a, __u64 _b, int _ret) 0: (bf) r6 = r1 ; int BPF_PROG(fmod_ret_test, int _a, __u64 _b, int _ret) 1: (79) r9 = *(u64 *)(r6 +8) func 'bpf_modify_return_test' arg1 type INT is not a struct There is no harm for the program to access int pointer argument. We are already doing that for string pointer, which is pointer to int with 1 byte size. Changing the is_string_ptr to generic integer check and renaming it to btf_type_is_int. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211208193245.172141-2-jolsa@kernel.org
generated by cgit (git 2.34.1) at 2025-09-19 12:11:53 +0000