summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-07iwlwifi: Fix FW name for glMatti Gottlieb
Fix FW name for gl use the crf fm and not fm7, since the later no longer exists. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204174546.497b2f2c587d.If71fa8cbed043c15f927bb78cb8a695625a362dd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: dbg: disable ini debug in 8000 family and belowMukesh Sisodiya
Yoyo based debug is not applicable for 8000 and below old devices. The check added in code has 9000 and below familiy which is corrected. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204174546.b6176a5bc198.Ib8e4b1e60e0b6c1538cc4f384dcf681b3db097ce@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: support SAR GEO Offset Mapping override via BIOSAyala Barazani
Support reading the SAR Geographic Offset Mapping (SGOM) table from UEFI to allow OEMs to override the values according to geographical regions. Signed-off-by: Ayala Barazani <ayala.barazani@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204174546.e6dfd8b5dd40.Ibc9a8fe2bfde345f49df5d57ec56663da6a53dc4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: pcie: retake ownership after resetJohannes Berg
In most cases, unless shutting down the NIC, we really need to retake ownership after doing a software reset of the NIC. Encode that into the API so we "automatically" do it, even in case of workarounds, and don't keep forgetting it like a few of the places we have did. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204174545.458f9d98ac21.I40b9a22df1ab8178cc838fc83d5190e689dfac6a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: always use 4K RB size by defaultJohannes Berg
When we use 2K RBs, we cannot receive all valid 802.11 frames, including e.g. long beacons, since up to 2304 bytes are valid (plus metadata and also encryption overhead etc.). Increase the RB size to be always 4K to avoid that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204174545.675781ab0da5.I5c653f4c7dd726f8ad40077e4a109b85e7c0cdb1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm/api: define system control commandJohannes Berg
The firmware is exposing a new system features control command, define the necessary data structures etc. Rename "soc.h" to "system.h" since the SoC command is also in the system group and adding another file for just one more struct seemed like a waste of files. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204174545.94a120687887.I79acffcf0793ea9e4ddec24b06420961bfb4fe94@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: bump FW API to 68 for AX devicesLuca Coelho
Start supporting API version 68 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204174545.695e3db16cf5.Ie94a3ad1c7a300cff7ecde26a732779159ec919e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: add some missing command stringsJohannes Berg
Some command strings in the system group weren't added for debug, add them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.5bbda292908e.I53cefd74547a745fd29261a795c94611e7ee8d1d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: fw: add support for splitting region type bitsMordechay Goodstein
In next region tlv (3) region type is going to be split into bit mask without affecting the ops for handling region type, so we just mask the type independent of the version due to all versions having the same bits usage. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.083e4b47055e.If7483d854e3d07f81236d314b8155cd5996f306c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: swap 1650i and 1650s killer struct namesYaara Baruch
The names of the killer 1650i and 1650s devices weren't aligned. This patch swap the names in the structs. Signed-off-by: Yaara Baruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.4e992a115f14.Icacedcc06f33e5457f650290e7deea22bf1ca12d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: acpi: fix wgds rev 3 sizeMiri Korenblit
The exact size of WGDS revision 3 was calculated using the wrong parameters. Fix it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.12c5b0cffe52.I7f342502f628f43a7e000189a699484bcef0f562@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: yoyo: support for DBGC4 for dramMukesh Sisodiya
Add DBGC4 memory for debug handling in driver which will be created, freed and collected from the FW in case of crash. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.488268ffb2a6.I4fd9ee9dc43d04953a640e19ecac7575ad34fe94@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: update rate scale in moving back to assoc stateMordechay Goodstein
In assoc state we only use narrow bandwidth, due to phy/radio not configured to max bandwidth. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.139d74d2b063.I4cfbb594c110ea9b250e2306c30601f847db2c1a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: avoid clearing a just saved session protection idShaul Triebitz
When scheduling a session protection the id is saved but then it may be cleared when calling iwl_mvm_te_clear_data (if a previous session protection is currently active). Fix it by saving the id after calling iwl_mvm_te_clear_data. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.b0743a588d14.I098fef6677d0dab3ef1b6183ed206a10bab01eb2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: add support for statistics update version 15Mordechay Goodstein
The main changes are remove the respond from STATISTICS_CMD and sending it with STATISTICS_NOTIFICATION, and updating for all mac id's and phy id's in one notification. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.832c7b599202.If192dce8f51ec13005999c3ff96fe09a73cd8f91@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: Add support for a new version of scan request commandIlan Peer
The scan request command is identical in binary format to the previous scan request command and the only change is now a previously reserved octet is used to indicate new flags introduced in the command. Align the code to support the new version and the previous one. Later patches would add the specific handling for the new flags. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.392a4af559bc.Ib8f1e3b527453531c10bfd7f4b116d3e257c7f1f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: Fix wrong documentation for scan request commandIlan Peer
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.26c8bd826c83.Iefc78689607561573d8afbc7c5d3797abfbe875e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: add missing entries for Gf4 with So and SoFLuca Coelho
We need to support platforms with So and SoF together with Gf4 radio modules. The difference is that these devices support CDB, so add the entries accordingly. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.e7fa5b87fbdb.Ib47ff1dc082366b570649dfd8a2b24f0d6c52b5b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: remove session protection upon station removalEmmanuel Grumbach
When the station is removed we need to remove the session protection that may be still running. Note that we need also to remove the session protection upon unassoc in case the station is kept in the AUTH state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.483977310ca2.If7eba02594f20dabd22d758e1c917fbca54b2ddd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: remove unused iwlax210_2ax_cfg_so_hr_a0 structureLuca Coelho
We don't use this structure anymore, except for a check that will never match, so we can remove this structure entirely. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.c41548abd174.I6bb4f6058fd85e1dd92cd056b6eaca1cb4aa74a3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: add support for PHY context command v4Johannes Berg
A new version of this command deprecates the rxchain_info field but is otherwise the same, so treat it the same way. We already leave the rxchain_info zeroed since the RLC command is supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.aca5bd78518e.I2f1b4b38899717851ea9f5b6dd23cde27e10387a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: fw: api: add link to PHY context command struct v1Johannes Berg
There are two possible versions of this command in use today, add a link to v1 as well in the documentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.d7c4ed8e85e0.I524a84e03068ecf7c3125ad028f0ca465d41c0f3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: support RLC configuration commandJohannes Berg
There's an RLC configuration command in the firmware that's going to replace the chain information in the PHY context. Add support for this command, while leaving the PHY context fields unset when we know the RLC command will be used. Also add support to send only the RLC configuration command if only the # of chains used on the PHY context changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.55faa3782bb0.I3f9d0071e680cab513c59b093d0827af99d41c51@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: d3: support v12 wowlan statusJohannes Berg
Newer firmware versions are going to come with a new version of the wowlan status API, which gives us replay counters for both GTKs that might still be in use, as well as unifying the layout of the counters to just be 64-bit quantities. Extend our code to handle this case and be able to install replay counters for both keys, if they're sent up from the firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.73637acafe0b.I33e27712a12fff2816edc0a8abda1759259e20d7@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: parse firmware alive message version 6Johannes Berg
There's a new version with some addition, we'll need to do something with the additional data later, but for now just parse it so we don't fail with the newer firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.f856cb190a4e.I77e3ff5a92b1bcc3e81c1344b046dade0a8b6a24@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: pcie: support Bz suspend/resume triggerHaim Dreyfuss
Instead of using two bits in the doorbell interrupt, the new Bz devices have a new CSR_IPC_SLEEP_CONTROL register to let drivers indicate the desired transition before triggering the doorbell interrupt. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.63f3d150689a.Iaeb6f9b007e81b1a5a02144b0281935e4613cb78@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: d3: move GTK rekeys conditionJohannes Berg
Move the GTK rekeying condition into iwl_mvm_set_key_rx_seq() so we can modify it in the next patch. In the next firmware API revision we'll properly get data for both active GTKs and will have to install it accordingly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.f309942ddd15.Iaa95c602f3a681dd464e10ce2de047aa86fac19c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: add support for Bz-Z HWMike Golant
Add support for Bz Z step HW with GF RF. Signed-off-by: Mike Golant <michael.golant@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.fc8626515758.Ibfeffc8bb071f9773ea189992ebef056f51be1be@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: support 4-bits in MAC step valueMike Golant
We have a MAC component (which is inside the SoC) and it has several different HW steps. 3 bits used to be enough but now we need 4-bits to represent all the different steps. Properly support 4-bits in the MAC step value by refactoring all the current handling of the MAC step/dash. Already from family 8000 and up the dash (bits 0-1) no longer exists and the step (until 8000 bits 2-3) consists of the dash bits as well. To do this remove the CSR_HW_REV_STEP and the CSR_HW_REV_DASH macros, replace them with CSR_HW_REV_STEP_DASH and add hw_rev_step into the trans struct. In addition remove the CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP and CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH macros and create a new macro combining the 2 (this way we don't need shifting or anything else.) Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Mike Golant <michael.golant@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211207160459.2e81a14d1f80.Ia5287e37fb3439d805336837361f6491f958e465@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: synchronize with FW after multicast commandsJohannes Berg
If userspace installs a lot of multicast groups very quickly, then we may run out of command queue space as we send the updates in an asynchronous fashion (due to locking concerns), and the CPU can create them faster than the firmware can process them. This is true even when mac80211 has a work struct that gets scheduled. Fix this by synchronizing with the firmware after sending all those commands - outside of the iteration we can send a synchronous echo command that just has the effect of the CPU waiting for the prior asynchronous commands to finish. This also will cause fewer of the commands to be sent to the firmware overall, because the work will only run once when rescheduled multiple times while it's running. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649 Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reported-by: Maximilian Ernestus <maximilian@ernestus.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: fix delBA vs. NSSN queue sync raceJohannes Berg
If we happen to decide an NSSN queue sync (IWL_MVM_RXQ_NSSN_SYNC) for some remaining packets that are still on the queue, but just after we've decided to do a delBA (which causes its own queues sync with IWL_MVM_RXQ_NOTIF_DEL_BA) we can end up with a sequence of events like this: CPU 1 CPU 2 remove BA session with baid N send IWL_MVM_RXQ_NOTIF_DEL_BA send IWL_MVM_RXQ_NSSN_SYNC get IWL_MVM_RXQ_NOTIF_DEL_BA get IWL_MVM_RXQ_NOTIF_DEL_BA get IWL_MVM_RXQ_NSSN_SYNC complete IWL_MVM_RXQ_NOTIF_DEL_BA remove N from baid_map[] get IWL_MVM_RXQ_NSSN_SYNC WARN_ON(!baid_map[N]) Thus, there's a race that leads in hitting the WARN_ON, but more importantly, it's a race that potentially even results in a new aggregation session getting assigned to baid N. To fix this, remove the WARN_ON() in the NSSN_SYNC case, we can't completely protect against hitting this case, so we shouldn't be warning. However, guard ourselves against BAID reuse by doing yet another round of queue synchronization after the entry is removed from the baid_map, so that it cannot be reused with any in-flight IWL_MVM_RXQ_NSSN_SYNC messages. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083237.44abbbc50f40.I5492600dfe513356555abe2d7df0e2835846e3d8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07RDMA/irdma: Don't arm the CQ more than two times if no CE for this CQTatyana Nikolova
Completion events (CEs) are lost if the application is allowed to arm the CQ more than two times when no new CE for this CQ has been generated by the HW. Check if arming has been done for the CQ and if not, arm the CQ for any event otherwise promote to arm the CQ for any event only when the last arm event was solicited. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20211201231509.1930-2-shiraz.saleem@intel.com Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07RDMA/irdma: Report correct WC errorsShiraz Saleem
Return IBV_WC_REM_OP_ERR for responder QP errors instead of IBV_WC_REM_ACCESS_ERR. Return IBV_WC_LOC_QP_OP_ERR for errors detected on the SQ with bad opcodes Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20211201231509.1930-1-shiraz.saleem@intel.com Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07RDMA/irdma: Fix a potential memory allocation issue in ↵Christophe JAILLET
'irdma_prm_add_pble_mem()' 'pchunk->bitmapbuf' is a bitmap. Its size (in number of bits) is stored in 'pchunk->sizeofbitmap'. When it is allocated, the size (in bytes) is computed by: size_in_bits >> 3 There are 2 issues (numbers bellow assume that longs are 64 bits): - there is no guarantee here that 'pchunk->bitmapmem.size' is modulo BITS_PER_LONG but bitmaps are stored as longs (sizeofbitmap=8 bits will only allocate 1 byte, instead of 8 (1 long)) - the number of bytes is computed with a shift, not a round up, so we may allocate less memory than needed (sizeofbitmap=65 bits will only allocate 8 bytes (i.e. 1 long), when 2 longs are needed = 16 bytes) Fix both issues by using 'bitmap_zalloc()' and remove the useless 'bitmapmem' from 'struct irdma_chunk'. While at it, remove some useless NULL test before calling kfree/bitmap_free. Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions") Link: https://lore.kernel.org/r/5e670b640508e14b1869c3e8e4fb970d78cbe997.1638692171.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07RDMA/irdma: Fix a user-after-free in add_pble_prmShiraz Saleem
When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE info list. Add the chunk entry to the PBLE info list only after successful setting of the SD in irdma_hmc_sd_one. Fixes: e8c4dbc2fcac ("RDMA/irdma: Add PBLE resource manager") Link: https://lore.kernel.org/r/20211207152135.2192-1-shiraz.saleem@intel.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07IB/hfi1: Fix leak of rcvhdrtail_dummy_kvaddrMike Marciniszyn
This buffer is currently allocated in hfi1_init(): if (reinit) ret = init_after_reset(dd); else ret = loadtime_init(dd); if (ret) goto done; /* allocate dummy tail memory for all receive contexts */ dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev, sizeof(u64), &dd->rcvhdrtail_dummy_dma, GFP_KERNEL); if (!dd->rcvhdrtail_dummy_kvaddr) { dd_dev_err(dd, "cannot allocate dummy tail memory\n"); ret = -ENOMEM; goto done; } The reinit triggered path will overwrite the old allocation and leak it. Fix by moving the allocation to hfi1_alloc_devdata() and the deallocation to hfi1_free_devdata(). Link: https://lore.kernel.org/r/20211129192008.101968.91302.stgit@awfm-01.cornelisnetworks.com Cc: stable@vger.kernel.org Fixes: 46b010d3eeb8 ("staging/rdma/hfi1: Workaround to prevent corruption during packet delivery") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07IB/hfi1: Fix early init panicMike Marciniszyn
The following trace can be observed with an init failure such as firmware load failures: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 0 PID: 537 Comm: kworker/0:3 Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1 Workqueue: events work_for_cpu_fn RIP: 0010:0x0 Code: Bad RIP value. RSP: 0000:ffffae5f878a3c98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff95e48e025c00 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff95e48e025c00 RBP: ffff95e4bf3660a4 R08: 0000000000000000 R09: ffffffff86d5e100 R10: ffff95e49e1de600 R11: 0000000000000001 R12: ffff95e4bf366180 R13: ffff95e48e025c00 R14: ffff95e4bf366028 R15: ffff95e4bf366000 FS: 0000000000000000(0000) GS:ffff95e4df200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000f86a0a003 CR4: 00000000001606f0 Call Trace: receive_context_interrupt+0x1f/0x40 [hfi1] __free_irq+0x201/0x300 free_irq+0x2e/0x60 pci_free_irq+0x18/0x30 msix_free_irq.part.2+0x46/0x80 [hfi1] msix_clean_up_interrupts+0x2b/0x70 [hfi1] hfi1_init_dd+0x640/0x1a90 [hfi1] do_init_one.isra.19+0x34d/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 The free_irq() results in a callback to the registered interrupt handler, and rcd->do_interrupt is NULL because the receive context data structures are not fully initialized. Fix by ensuring that the do_interrupt is always assigned and adding a guards in the slow path handler to detect and handle a partially initialized receive context and noop the receive. Link: https://lore.kernel.org/r/20211129192003.101968.33612.stgit@awfm-01.cornelisnetworks.com Cc: stable@vger.kernel.org Fixes: b0ba3c18d6bf ("IB/hfi1: Move normal functions from hfi1_devdata to const array") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07IB/hfi1: Insure use of smp_processor_id() is preempt disabledMike Marciniszyn
The following BUG has just surfaced with our 5.16 testing: BUG: using smp_processor_id() in preemptible [00000000] code: mpicheck/1581081 caller is sdma_select_user_engine+0x72/0x210 [hfi1] CPU: 0 PID: 1581081 Comm: mpicheck Tainted: G S 5.16.0-rc1+ #1 Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016 Call Trace: <TASK> dump_stack_lvl+0x33/0x42 check_preemption_disabled+0xbf/0xe0 sdma_select_user_engine+0x72/0x210 [hfi1] ? _raw_spin_unlock_irqrestore+0x1f/0x31 ? hfi1_mmu_rb_insert+0x6b/0x200 [hfi1] hfi1_user_sdma_process_request+0xa02/0x1120 [hfi1] ? hfi1_write_iter+0xb8/0x200 [hfi1] hfi1_write_iter+0xb8/0x200 [hfi1] do_iter_readv_writev+0x163/0x1c0 do_iter_write+0x80/0x1c0 vfs_writev+0x88/0x1a0 ? recalibrate_cpu_khz+0x10/0x10 ? ktime_get+0x3e/0xa0 ? __fget_files+0x66/0xa0 do_writev+0x65/0x100 do_syscall_64+0x3a/0x80 Fix this long standing bug by moving the smp_processor_id() to after the rcu_read_lock(). The rcu_read_lock() implicitly disables preemption. Link: https://lore.kernel.org/r/20211129191958.101968.87329.stgit@awfm-01.cornelisnetworks.com Cc: stable@vger.kernel.org Fixes: 0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07IB/hfi1: Correct guard on eager buffer deallocationMike Marciniszyn
The code tests the dma address which legitimately can be 0. The code should test the kernel logical address to avoid leaking eager buffer allocations that happen to map to a dma address of 0. Fixes: 60368186fd85 ("IB/hfi1: Fix user-space buffers mapping with IOMMU enabled") Link: https://lore.kernel.org/r/20211129191952.101968.17137.stgit@awfm-01.cornelisnetworks.com Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07nvme: fix use after free when disconnecting a reconnecting ctrlRuozhu Li
A crash happens when trying to disconnect a reconnecting ctrl: 1) The network was cut off when the connection was just established, scan work hang there waiting for some IOs complete. Those I/Os were retried because we return BLK_STS_RESOURCE to blk in reconnecting. 2) After a while, I tried to disconnect this connection. This procedure also hangs because it tried to obtain ctrl->scan_lock. It should be noted that now we have switched the controller state to NVME_CTRL_DELETING. 3) In nvme_check_ready(), we always return true when ctrl->state is NVME_CTRL_DELETING, so those retrying I/Os were issued to the bottom device which was already freed. To fix this, when ctrl->state is NVME_CTRL_DELETING, issue cmd to bottom device only when queue state is live. If not, return host path error to the block layer Signed-off-by: Ruozhu Li <liruozhu@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-12-07nvme-multipath: set ana_log_size to 0 after free ana_log_bufHou Tao
Set ana_log_size to 0 when ana_log_buf is freed to make sure nvme_mpath_init_identify will do the right thing when retrying after an earlier failure. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-12-07PCI: apple: Follow the PCIe specifications when resetting the portMarc Zyngier
While the Apple PCIe driver works correctly when directly booted from the firmware, it fails to initialise when the kernel is booted from a bootloader using PCIe such as u-boot. That's because we're missing a proper reset of the port (we only clear the reset, but never assert it). The PCIe spec requirements are two-fold: - PERST# must be asserted before setting up the clocks and stay asserted for at least 100us (Tperst-clk) - Once PERST# is deasserted, the OS must wait for at least 100ms "from the end of a Conventional Reset" before we can start talking to the devices Implementing this results in a booting system. [bhelgaas: #PERST -> PERST#, update spec references to current] Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up") Link: https://lore.kernel.org/r/20211123180636.80558-2-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Pali Rohár <pali@kernel.org> Cc: Alyssa Rosenzweig <alyssa@rosenzweig.io> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-07Bluetooth: mgmt: Introduce mgmt_alloc_skb and mgmt_send_event_skbLuiz Augusto von Dentz
This introduces mgmt_alloc_skb and mgmt_send_event_skb which are convenient when building MGMT events that have variable length as the likes of skb_put_data can be used to insert portion directly on the skb instead of having to first build an intermediate buffer just to be copied over the skb. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btusb: Return error code when getting patch status failedMark Chen
If there are failure cases in getting patch status, it should return the error code (-EIO). Fixes: fc342c4dc4087 ("Bluetooth: btusb: Add protocol support for MediaTek MT7921U USB devices") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btusb: Handle download_firmware failure casesMark Chen
For Mediatek chipset, it can not enabled if there are something wrong in btmtk_setup_firmware_79xx(). Thus, the process must be terminated and returned error code. Fixes: fc342c4dc4087 ("Bluetooth: btusb: Add protocol support for MediaTek MT7921U USB devices") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: msft: Fix compilation when CONFIG_BT_MSFTEXT is not setLuiz Augusto von Dentz
This fixes compilation when CONFIG_BT_MSFTEXT is not set. Fixes: 6b3d4c8fcf3f2 ("Bluetooth: hci_event: Use of a function table to handle HCI events") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: hci_sync: Set Privacy Mode when updating the resolving listLuiz Augusto von Dentz
This adds support for Set Privacy Mode when updating the resolving list when HCI_CONN_FLAG_DEVICE_PRIVACY so the controller shall use Device Mode for devices programmed in the resolving list, Device Mode is actually required when the remote device are not able to use RPA as otherwise the default mode is Network Privacy Mode in which only allows RPAs thus the controller would filter out advertisement using identity addresses for which there is an IRK. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: Introduce HCI_CONN_FLAG_DEVICE_PRIVACY device flagLuiz Augusto von Dentz
This introduces HCI_CONN_FLAG_DEVICE_PRIVACY which can be used by userspace to indicate to the controller to use Device Privacy Mode to a specific device. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btusb: Add support for queuing during polling intervalLuiz Augusto von Dentz
This makes btusb to queue ACL and events during a polling interval by using of a delayed work, with the interval working as a time window where frames received from different endpoints are considered to be arrived at same time and then attempt to resolve potential conflics by processing the events ahead of ACL packets. It worth noting though that priorizing events over ACL data may result in inverting the order compared to how they appeared over the air, for instance there may be packets received before a disconnect event that will be discarded and unencrypted packets received before encryption change which would considered encrypted, because of these potential changes on the order the support for queuing during the polling interval is not enabled by default so it requires setting force_poll_sync debugfs while the adapter is down. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: hci_core: Rework hci_conn_params flagsLuiz Augusto von Dentz
This reworks hci_conn_params flags to use bitmap_* helpers and add support for setting the supported flags in hdev->conn_flags so it can easily be accessed. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-22 09:46:01 +0000