| Age | Commit message (Collapse) | Author |
|---|
|
Whether residue can be reported or not is not a property of the audio
controller but of the DMA controller. The FLAG_NO_RESIDUE was initially
added when the DMAengine framework had no support for describing the residue
reporting capabilities of the controller. Support for this was added quite a
while ago and recently the DMAengine framework started to complain if a
driver does not describe its capabilities and a lot of patches have been
merged that add support for this where it was missing. So it should be safe
to assume that driver on actively used platforms properly implement the DMA
capabilities API.
This patch makes the FLAG_NO_RESIDUE internal and no longer allows audio
controller drivers to manually set the flag. If a DMA driver against
expectations does not support reporting its capabilities for now the generic
DMAengine PCM driver will now emit a warning and simply assume that residue
reporting is not supported. In the future this might be changed to aborting
with an error.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Various formats had their byte ordering implemented incorrectly, and
the V4L2_PIX_FMT_UYVY is actually impossible to create, instead you
get V4L2_PIX_FMT_YVYU.
This was working before commit ad6ac452227b7cb93ac79beec092850d178740b1
("add new formats support for marvell-ccic driver"). That commit broke
the original format support and the OLPC XO-1 laptop showed wrong
colors ever since (if you are crazy enough to attempt to run the latest
kernel on it, like I did).
The email addresses of the authors of that patch are no longer valid,
so without a way to reach them and ask them about their test setup
I am going with what I can test on the OLPC laptop.
If this breaks something for someone on their non-OLPC setup, then
contact the linux-media mailinglist. My suspicion however is that
that commit went in untested.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Cc: <stable@vger.kernel.org> # for v3.19 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
bnx2x's 'disable_tpa=1' module option is not respected properly and TPA
(transparent packet aggregation) remains enabled. Even though the
module option causes LRO to be disabled, TPA is enabled in GRO mode.
Additionally, disabling GRO via ethtool then has no effect. One can
still observe tpa_* statistics increase and large packets being received
in tcpdump.
The bug was an unintended consequence of commit aebf6244cd39 "bnx2x: Be
more forgiving toward SW GRO".
Fix it by following the bp->disable_tpa flag when initializing fp's.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fix spelling typo in printk.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mlx4_en_check_rxfh_func() was checking for hardware support before
setting a known RSS hash function, but didn't do any check before
setting unknown RSS hash function. Need to make it fail on such values.
In this occasion, moved the actual setting of the new value from the
check function into mlx4_en_set_rxfh().
Fixes: 947cbb0 ("net/mlx4_en: Support for configurable RSS hash function")
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the new gpiod_get_array and gpiod_put_array functions
(added to mainline in the v4.1 merge window) for obtaining and
disposing of GPIO descriptors.
Cc: David Miller <davem@davemloft.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes:
====================
net/netfilter/nft_reject.c: In function ‘nft_reject_dump’:
net/netfilter/nft_reject.c:61:2: warning: enumeration value ‘NFT_REJECT_TCP_RST’ not handled in switch [-Wswitch]
switch (priv->type) {
^
net/netfilter/nft_reject.c:61:2: warning: enumeration value ‘NFT_REJECT_ICMPX_UNREACH’ not handled in switch [-Wswi\
tch]
net/netfilter/nft_reject_inet.c: In function ‘nft_reject_inet_dump’:
net/netfilter/nft_reject_inet.c:105:2: warning: enumeration value ‘NFT_REJECT_TCP_RST’ not handled in switch [-Wswi\
tch]
switch (priv->type) {
^
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 3w-9xxx driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point. Also remove the dma mapping helpers
which have another inherent race due to the request_id index.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
The 3w-xxxx driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point. Also remove the dma mapping helpers
which have another inherent race due to the request_id index.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
The 3w-sas driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point. Also remove the dma mapping helpers
which have another inherent race due to the request_id index.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Torsten Luettgert <ml-lkml@enda.eu>
Tested-by: Bernd Kardatzki <Bernd.Kardatzki@med.uni-tuebingen.de>
Cc: stable@vger.kernel.org
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
The driver currently calls kmalloc with GFP_KERNEL while holding a lock.
Fix it by doing the allocation earlier, before taking the lock.
Tested on AHA-1542B.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
This patch fixes the race in the beginning of benchmark run when some
threads hasn't got assigned curr_cpu yet so they don't occur in
nodes-of-process stats and benchmark concludes that all remaining
threads are converged already.
The race can be reproduced with small amount of threads and some bigger
amount of shared process memory, e.g. one process, two threads and 5GB
of process memory.
Signed-off-by: Petr Holasek <pholasek@redhat.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1429198699-25039-4-git-send-email-pholasek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Corrected description and fixed function of --quiet argument.
Signed-off-by: Petr Holasek <pholasek@redhat.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1429198699-25039-2-git-send-email-pholasek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The futex-requeue benchmark can hang because of missing wakeups once the
benchmark is done, ie:
[Run 1]: Requeued 1024 of 1024 threads in 0.3290 ms
perf: couldn't wakeup all tasks (135/1024)
This bug, while perhaps suggesting missing wakeups in kernel futex code,
is merely a consequence of the crappy FUTEX_CMP_REQUEUE man page,
incorrectly mentioning that the number of requeued tasks is in fact
returned, not the wakeups.
This patch acknowledges this and updates the corresponding futex_wake
code around it.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/1429894848.10273.44.camel@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are missing curly braces which causes find_variable() return wrong
value when probing with global variables.
This problem can be reproduced as following:
$ perf probe -v --add='generic_perform_write global_variable_for_test'
...
Try to find probe point from debuginfo.
Probe point found: generic_perform_write+0
Searching 'global_variable_for_test' variable in context.
An error occurred in debuginfo analysis (-2).
Error: Failed to add events. Reason: No such file or directory (Code: -2)
After this patch:
$ perf probe -v --add='generic_perform_write global_variable_for_test'
...
Converting variable global_variable_for_test into trace event.
global_variable_for_test type is int.
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Added new event:
Writing event: p:probe/generic_perform_write _stext+1237464
global_variable_for_test=@global_variable_for_test+0:s32
probe:generic_perform_write (on generic_perform_write with
global_variable_for_test)
You can now use it in all perf tools, such as:
perf record -e probe:generic_perform_write -aR sleep 1
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1429949338-18678-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This works around a issue with qnap iscsi targets not handling large IOs
very well.
The target returns:
VPD INQUIRY: Block limits page (SBC)
Maximum compare and write length: 1 blocks
Optimal transfer length granularity: 1 blocks
Maximum transfer length: 4294967295 blocks
Optimal transfer length: 4294967295 blocks
Maximum prefetch, xdread, xdwrite transfer length: 0 blocks
Maximum unmap LBA count: 8388607
Maximum unmap block descriptor count: 1
Optimal unmap granularity: 16383
Unmap granularity alignment valid: 0
Unmap granularity alignment: 0
Maximum write same length: 0xffffffff blocks
Maximum atomic transfer length: 0
Atomic alignment: 0
Atomic transfer length granularity: 0
and it is *sometimes* able to handle at least one IO of size up to 8 MB. We
have seen in traces where it will sometimes work, but other times it
looks like it fails and it looks like it returns failures if we send
multiple large IOs sometimes. Also it looks like it can return 2 different
errors. It will sometimes send iscsi reject errors indicating out of
resources or it will send invalid cdb illegal requests check conditions.
And then when it sends iscsi rejects it does not seem to handle retries
when there are command sequence holes, so I could not just add code to
try and gracefully handle that error code.
The problem is that we do not have a good contact for the company,
so we are not able to determine under what conditions it returns
which error and why it sometimes works.
So, this patch just adds a new black list flag to set targets like this to
the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19
caused this regression, so I also ccing stable.
Reported-by: Christian Hesse <list@eworm.de>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
Because of the peculiar way that md devices are created (automatically
when the device node is opened), a new device can be created and
registered immediately after the
blk_unregister_region(disk_devt(disk), disk->minors);
call in del_gendisk().
Therefore it is important that all visible artifacts of the previous
device are removed before this call. In particular, the 'bdi'.
Since:
commit c4db59d31e39ea067c32163ac961e9c80198fd37
Author: Christoph Hellwig <hch@lst.de>
fs: don't reassign dirty inodes to default_backing_dev_info
moved the
device_unregister(bdi->dev);
call from bdi_unregister() to bdi_destroy() it has been quite easy to
lose a race and have a new (e.g.) "md127" be created after the
blk_unregister_region() call and before bdi_destroy() is ultimately
called by the final 'put_disk', which must come after del_gendisk().
The new device finds that the bdi name is already registered in sysfs
and complains
> [ 9627.630029] WARNING: CPU: 18 PID: 3330 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5a/0x70()
> [ 9627.630032] sysfs: cannot create duplicate filename '/devices/virtual/bdi/9:127'
We can fix this by moving the bdi_destroy() call out of
blk_release_queue() (which can happen very late when a refcount
reaches zero) and into blk_cleanup_queue() - which happens exactly when the md
device driver calls it.
Then it is only necessary for md to call blk_cleanup_queue() before
del_gendisk(). As loop.c devices are also created on demand by
opening the device node, we make the same change there.
Fixes: c4db59d31e39ea067c32163ac961e9c80198fd37
Reported-by: Azat Khuzhin <a3at.mail@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org (v4.0)
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Perf top raise a warning if a kernel sample is collected but kernel map
is restricted. The warning message needs to dereference al.map->dso...
However, previous perf_event__preprocess_sample() doesn't always
guarantee al.map != NULL, for example, when kernel map is restricted.
This patch validates al.map before dereferencing, avoid the segfault.
Before this patch:
$ cat /proc/sys/kernel/kptr_restrict
1
$ perf top -p 120183
perf: Segmentation fault
-------- backtrace --------
/path/to/perf[0x509868]
/lib64/libc.so.6(+0x3545f)[0x7f9a1540045f]
/path/to/perf[0x448820]
/path/to/perf(cmd_top+0xe3c)[0x44a5dc]
/path/to/perf[0x4766a2]
/path/to/perf(main+0x5f5)[0x42e545]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7f9a153ecbd4]
/path/to/perf[0x42e674]
And gdb call trace:
Program received signal SIGSEGV, Segmentation fault.
perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0)
at builtin-top.c:736
736 !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ?
(gdb) bt
#0 perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0)
at builtin-top.c:736
#1 perf_top__mmap_read_idx (top=top@entry=0x7fffffffa8a0, idx=idx@entry=0) at builtin-top.c:855
#2 0x000000000044a5dd in perf_top__mmap_read (top=0x7fffffffa8a0) at builtin-top.c:872
#3 __cmd_top (top=0x7fffffffa8a0) at builtin-top.c:997
#4 cmd_top (argc=<optimized out>, argv=<optimized out>, prefix=<optimized out>) at builtin-top.c:1267
#5 0x00000000004766a3 in run_builtin (p=p@entry=0x8a6ce8 <commands+264>, argc=argc@entry=3, argv=argv@entry=0x7fffffffdf70)
at perf.c:371
#6 0x000000000042e546 in handle_internal_command (argv=0x7fffffffdf70, argc=3) at perf.c:430
#7 run_argv (argv=0x7fffffffdcf0, argcp=0x7fffffffdcfc) at perf.c:474
#8 main (argc=3, argv=0x7fffffffdf70) at perf.c:589
(gdb)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1429946703-80807-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Otherwise we print false warning from time to time.
v2: agd5f: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise the change isn't atomic.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise it is possible that we will have page table corruption
if we change a BOs address multiple times.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If we unmap BOs before releasing them them the intervall tree locks
up because we try to remove an entry not inside the tree.
Based on a patch from Michel Dänzer.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
value of NR_BOUNCE
Commit d2c5e30c9a1420902262aa923794d2ae4e0bc391
("[PATCH] zoned vm counters: conversion of nr_bounce to per zone counter")
convert statistic of nr_bounce to per zone and one global value in vm_stat,
but it call inc_|dec_zone_page_state on different pages, then different
zones, and cause us to get unexpected value of NR_BOUNCE.
Below is the result on my machine:
Mar 2 09:26:08 udknight kernel: [144766.778265] Mem-Info:
Mar 2 09:26:08 udknight kernel: [144766.778266] DMA per-cpu:
Mar 2 09:26:08 udknight kernel: [144766.778268] CPU 0: hi: 0, btch: 1 usd: 0
Mar 2 09:26:08 udknight kernel: [144766.778269] CPU 1: hi: 0, btch: 1 usd: 0
Mar 2 09:26:08 udknight kernel: [144766.778270] Normal per-cpu:
Mar 2 09:26:08 udknight kernel: [144766.778271] CPU 0: hi: 186, btch: 31 usd: 0
Mar 2 09:26:08 udknight kernel: [144766.778273] CPU 1: hi: 186, btch: 31 usd: 0
Mar 2 09:26:08 udknight kernel: [144766.778274] HighMem per-cpu:
Mar 2 09:26:08 udknight kernel: [144766.778275] CPU 0: hi: 186, btch: 31 usd: 0
Mar 2 09:26:08 udknight kernel: [144766.778276] CPU 1: hi: 186, btch: 31 usd: 0
Mar 2 09:26:08 udknight kernel: [144766.778279] active_anon:46926 inactive_anon:287406 isolated_anon:0
Mar 2 09:26:08 udknight kernel: [144766.778279] active_file:105085 inactive_file:139432 isolated_file:0
Mar 2 09:26:08 udknight kernel: [144766.778279] unevictable:653 dirty:0 writeback:0 unstable:0
Mar 2 09:26:08 udknight kernel: [144766.778279] free:178957 slab_reclaimable:6419 slab_unreclaimable:9966
Mar 2 09:26:08 udknight kernel: [144766.778279] mapped:4426 shmem:305277 pagetables:784 bounce:0
Mar 2 09:26:08 udknight kernel: [144766.778279] free_cma:0
Mar 2 09:26:08 udknight kernel: [144766.778286] DMA free:3324kB min:68kB low:84kB high:100kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15976kB managed:15900kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
Mar 2 09:26:08 udknight kernel: [144766.778287] lowmem_reserve[]: 0 822 3754 3754
Mar 2 09:26:08 udknight kernel: [144766.778293] Normal free:26828kB min:3632kB low:4540kB high:5448kB active_anon:4872kB inactive_anon:68kB active_file:1796kB inactive_file:1796kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:892920kB managed:842560kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:4144kB slab_reclaimable:25676kB slab_unreclaimable:39864kB kernel_stack:1944kB pagetables:3136kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:2412612 all_unreclaimable? yes
Mar 2 09:26:08 udknight kernel: [144766.778294] lowmem_reserve[]: 0 0 23451 23451
Mar 2 09:26:08 udknight kernel: [144766.778299] HighMem free:685676kB min:512kB low:3748kB high:6984kB active_anon:182832kB inactive_anon:1149556kB active_file:418544kB inactive_file:555932kB unevictable:2612kB isolated(anon):0kB isolated(file):0kB present:3001732kB managed:3001732kB mlocked:0kB dirty:0kB writeback:0kB mapped:17704kB shmem:1216964kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:75771152kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
Mar 2 09:26:08 udknight kernel: [144766.778300] lowmem_reserve[]: 0 0 0 0
You can see bounce:75771152kB for HighMem, but bounce:0 for lowmem and global.
This patch fix it.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Fix a typo in the TX DMA interrupt name for AUART4.
This patch makes AUART4 operational again.
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: f30fb03d4d3a ("ARM: dts: add generic DMA device tree binding for mxs-dma")
Cc: stable@vger.kernel.org
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
Added entry in sst driver to support rt5650 codec
for intel Braswell platform.
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
we have defined SNDRV_CTL_ELEM_ID_NAME_MAXLEN as size of name array so use
this define instead of numeric value
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
kbuild robot reports following warning:
"sound/soc/intel/haswell/sst-haswell-ipc.c:2204:1-6:
WARNING: invalid free of devm_ allocated data"
As julia explains to me, the memory allocated with devm_kalloc
is freed automatically on failure of a probe function. So this
kfree should be removed otherwise the double free will be got in
error handler path.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently LO_VOL_* stays at it's default (0x4 each) but this should be
calculated after setting VAG_VAL and LO_VAGCNTRL.
LO_VOL_* = 40 * log10(VAG_VAL / LO_VAGCNTRL) + 15
To avoid the log10 operation a table for all valid register values is
precalculated which contains the corresponding value
(VAG_VAL * 100 / LO_VAGCNTRL).
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is a preparation for calculating lo_vol which needs both vag
and lo_vag.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The property '#pwm-cells' is currently missing. It is not possible to
use pwm4 without this property.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Fixes: 5658a68fb578 ("ARM i.MX25: Add devicetree")
Cc: <stable@vger.kernel.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
Remove including <linux/version.h> that don't need it.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to the schematics the both LHPOUT and RHPOUT are connected to the
external connector. RHPOUT is missing from the DAPM routes, but otherwise
they seem to be complete.
This patch adds the missing route and then sets the fully_routed flag for
the card. This allows to remove all the manual calls to
snd_soc_dapm_nc_pin().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reported by coverity CID 1296024.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The DSP control information contains various hints about the usage of
the control use these when handling the control.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using uXX for little endian data, was triggering some warnings through
sparse:
sound/soc/codecs/wm_adsp.c:716:26: sparse: cast to restricted __le16
sound/soc/codecs/wm_adsp.c:736:23: sparse: cast to restricted __le16
sound/soc/codecs/wm_adsp.c:739:23: sparse: cast to restricted __le32
Correct this by changing the casts to use __leXX instead of uXX.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are very few version 0 firmwares in the wild and at some point in
the future it would be nice to remove support for them from the driver,
as they require several work arounds to be present to create controls
properly.
This patch adds a depreciated warning if someone is using this file
format.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Version 2 of the firmware file format includes length fields for the
various strings associated with control creation, to reduce file size.
However this does increase the parsing complexity slightly. This patch
adds support for the revision of the file format.
This patch also adds a new naming scheme for controls created from rev 2
firmware files. This version of the file format is commonly used to
add multiple controls per algorithm per memory region and the old
control naming scheme would cause multiple controls to have the same
name in this case.. Note that the naming scheme for older firmware
versions is left intact to ensure backwards compatibility.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Revision one of the file format includes new algorithm and coefficient
blocks which provide additional information about the controls exported
by the firmware. This patch updates the processing to handle this
version of the file format. Note that whilst this version of the format
adds support for specifying a name for the control through the firmware
file this has not been used and to keep compatibility with existing
deployments no changes to the firmware control naming are made by this
patch.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is slightly logically better and avoids some unnecessary forward
declarations in the following refactoring.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The private field in wm_coeff_ctl is currently unused and given the
controls are entirely handled within the ADSP code it is not clear what
it would be used for in the future. Remove the field for now it can be
readded if it is ever required.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Tidy up the code a little by factoring out the creation of the algorithm
regions.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Physically reading and writing controls to/from the DSP are handled by
two low level functions (wm_coeff_{write|read}_control, these currently
take in a snd_kcontrol pointer but immediately pull out a wm_coeff_ctl
pointer from the private data. These functions don't handle the kcontrols
at all they just shuttle data to and from the chip and all the call
sites have a wm_coeff_ctl pointer available. This patch just passes the
wm_coeff_ctl pointer straight into these functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we only allocate 44 bytes for the control name keep it on the stack
to avoid a lot of pointless memory allocation.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ALSA only supports control names up to 44 bytes, so there is no point
allocating a whole page of memory to hold the control name, just limit
the control name to 44 bytes.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The algorithm region information in the firmware doesn't contain a
length field, explicitly pass this to the create_control function rather
than bundling into wm_adsp_alg_region.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have wm_adsp_region, wm_adsp_alg_region, and wmfw_region, the
variables for which are all frequently called region, this can get quite
confusing when reviewing the code especially given some functions are
quite long. Consistently use mem for wm_adsp_regions, alg_region for
wm_adsp_alg_region and region for wmfw_region.
Additionally, we use a mix of adsp and dsp for pointers to the wm_adsp
structure standardise this on dsp.
Finally, we use algs to refer to the number of algorithms quite
frequently, change this to the more descriptive n_algs.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The vast majority of the wm_adsp_setup_algs function is case statements
for ADSP1 or ADSP2, this patch splits this out into two separate
functions wm_adsp1_setup_algs and wm_adsp2_setup_algs. The small amount
of shared code between them is factored out into an extra helper
function. This makes the code a lot cleaner.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The adau1701 has two power domains, DVDD and AVDD.
Enable them both as long as the codec is in use.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The fixed-regulator bindings require a separate property enable-active-high,
the standard gpio phandle property polarity setting is ignored.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Fixes: 4fe69a934b1f ("ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
Seems to have problems with high mclks.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
