| Age | Commit message (Collapse) | Author |
|---|
|
The throbber could race with creation of the anchor entry and cause the
IDR to have zero entries in it, which would cause the test to fail.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
When run on a single CPU, this test would frequently access already-freed
memory. Due to timing, this bug never showed up on multi-CPU tests.
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Several test runners register individual worker threads with the
RCU library, but neglect to register the main thread, which can lead
to objects being freed while the main thread is in what appears to be
an RCU critical section.
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Commit 496121c02127 ("ACPI: processor: idle: Allow probing on platforms
with one ACPI C-state") broke CPU0 hotplug on certain systems, e.g.
I'm observing the following on AWS Nitro (e.g r5b.xlarge but other
instance types are affected as well):
# echo 0 > /sys/devices/system/cpu/cpu0/online
# echo 1 > /sys/devices/system/cpu/cpu0/online
<10 seconds delay>
-bash: echo: write error: Input/output error
In fact, the above mentioned commit only revealed the problem and did
not introduce it. On x86, to wakeup CPU an NMI is being used and
hlt_play_dead()/mwait_play_dead() loops are prepared to handle it:
/*
* If NMI wants to wake up CPU0, start CPU0.
*/
if (wakeup_cpu0())
start_cpu0();
cpuidle_play_dead() -> acpi_idle_play_dead() (which is now being called on
systems where it wasn't called before the above mentioned commit) serves
the same purpose but it doesn't have a path for CPU0. What happens now on
wakeup is:
- NMI is sent to CPU0
- wakeup_cpu0_nmi() works as expected
- we get back to while (1) loop in acpi_idle_play_dead()
- safe_halt() puts CPU0 to sleep again.
The straightforward/minimal fix is add the special handling for CPU0 on x86
and that's what the patch is doing.
Fixes: 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.12, round 2:
- Fix a system failure on imx6qdl-phytec-pfla02 board when booting from
SD, by adding missing vmmc supply for SD interfaces.
- Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition.
* tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0
Link: https://lore.kernel.org/r/20210330090236.GQ22955@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
More fixes for omaps for v5.12-rc cycle
Two fixes for hangs, mmc slot order fix, and a voltage typo fix:
- Remove unused duplicate sha2md5_fck clock node that can race with the
OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks
- Add aliases for omap4/5 mmc to put the slots back into the right
order again
- Fix typo for bionic voltage controllers that accidentally use mpu
for all instances instead of mpu, core and iva
- Fix random hangs for droid4 caused by missing fix from TI Android
kernel tree to do a dummy smc call on cpuidle wakeup path
* tag 'omap-for-v5.12/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: PM: update ROM return address for OSWR and OFF
ARM: OMAP4: Fix PMIC voltage domains for bionic
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
Link: https://lore.kernel.org/r/pull-1616584662-702939@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoC changes for 5.12,
please pull the following:
- Florian reverts the adding of the second level interrupt controller
for HDMI BSC interrupts since they collide with the main I2C
controller (i2c-bcm2835).
* tag 'arm-soc/for-5.12/devicetree-part2' of https://github.com/Broadcom/stblinux:
Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a test for the issue when KVM_SET_CLOCK(0) call could cause
TSC page value to go very big because of a signedness issue around
hv_clock->system_time.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210326155551.17446-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_guest_time_update()
When guest time is reset with KVM_SET_CLOCK(0), it is possible for
'hv_clock->system_time' to become a small negative number. This happens
because in KVM_SET_CLOCK handling we set 'kvm->arch.kvmclock_offset' based
on get_kvmclock_ns(kvm) but when KVM_REQ_CLOCK_UPDATE is handled,
kvm_guest_time_update() does (masterclock in use case):
hv_clock.system_time = ka->master_kernel_ns + v->kvm->arch.kvmclock_offset;
And 'master_kernel_ns' represents the last time when masterclock
got updated, it can precede KVM_SET_CLOCK() call. Normally, this is not a
problem, the difference is very small, e.g. I'm observing
hv_clock.system_time = -70 ns. The issue comes from the fact that
'hv_clock.system_time' is stored as unsigned and 'system_time / 100' in
compute_tsc_page_parameters() becomes a very big number.
Use 'master_kernel_ns' instead of get_kvmclock_ns() when masterclock is in
use and get_kvmclock_base_ns() when it's not to prevent 'system_time' from
going negative.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210331124130.337992-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
pvclock_gtod_sync_lock can be taken with interrupts disabled if the
preempt notifier calls get_kvmclock_ns to update the Xen
runstate information:
spin_lock include/linux/spinlock.h:354 [inline]
get_kvmclock_ns+0x25/0x390 arch/x86/kvm/x86.c:2587
kvm_xen_update_runstate+0x3d/0x2c0 arch/x86/kvm/xen.c:69
kvm_xen_update_runstate_guest+0x74/0x320 arch/x86/kvm/xen.c:100
kvm_xen_runstate_set_preempted arch/x86/kvm/xen.h:96 [inline]
kvm_arch_vcpu_put+0x2d8/0x5a0 arch/x86/kvm/x86.c:4062
So change the users of the spinlock to spin_lock_irqsave and
spin_unlock_irqrestore.
Reported-by: syzbot+b282b65c2c68492df769@syzkaller.appspotmail.com
Fixes: 30b5c851af79 ("KVM: x86/xen: Add support for vCPU runstate information")
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no need to include changes to vcpu->requests into
the pvclock_gtod_sync_lock critical section. The changes to
the shared data structures (in pvclock_update_vm_gtod_copy)
already occur under the lock.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
|
nested vmexit
Fixing nested_vmcb_check_save to avoid all TOC/TOU races
is a bit harder in released kernels, so do the bare minimum
by avoiding that EFER.SVME is cleared. This is problematic
because svm_set_efer frees the data structures for nested
virtualization if EFER.SVME is cleared.
Also check that EFER.SVME remains set after a nested vmexit;
clearing it could happen if the bit is zero in the save area
that is passed to KVM_SET_NESTED_STATE (the save area of the
nested state corresponds to the nested hypervisor's state
and is restored on the next nested vmexit).
Cc: stable@vger.kernel.org
Fixes: 2fcf4876ada ("KVM: nSVM: implement on demand allocation of the nested state")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Avoid races between check and use of the nested VMCB controls. This
for example ensures that the VMRUN intercept is always reflected to the
nested hypervisor, instead of being processed by the host. Without this
patch, it is possible to end up with svm->nested.hsave pointing to
the MSR permission bitmap for nested guests.
This bug is CVE-2021-29657.
Reported-by: Felix Wilhelm <fwilhelm@google.com>
Cc: stable@vger.kernel.org
Fixes: 2fcf4876ada ("KVM: nSVM: implement on demand allocation of the nested state")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the new multi-interface support in USB serial core to properly claim
also the control interface during probe. This prevents having another
driver claim the control interface and makes core allocate resources
also for the interrupt endpoint (currently unused).
Switch to probing only Communication Class interfaces and use the Union
functional descriptor to determine the corresponding data interface.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
A single USB function can be implemented using a group of interfaces and
this is for example commonly used for Communication Class devices.
Add support for multi-interface functions to USB serial core and export
an interface that allows drivers to claim a second sibling interface.
The interface could easily be extended to allow claiming further
interfaces if ever needed.
When a driver claims a sibling interface in probe(), core allocates
resources for any bulk in, bulk out, interrupt in and interrupt out
endpoints found also on the sibling interface.
Disconnect is implemented so that unbinding either interface will
release the other interface while disconnect() is called precisely once.
Similarly, suspend() is called when the first sibling interface is
suspended and resume() is called when the last sibling interface is
resumed by USB core.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Refactor endpoint classification and replace the build-time
endpoint-array sanity checks with runtime checks in preparation for
handling endpoints from a sibling interface.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The suspending flag was added back in 2009 but no users ever followed.
Remove it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The XR21V141X does not have a 5- or 6-bit mode, but the current
implementation failed to properly restore the old setting when CS5 or
CS6 was requested. Instead an invalid request would be sent to the
device.
Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The variable error is initialized to 0 and is set to 1 this
value is never read as it is on an immediate return path. The
only read of error is to check it is 0 and this check is always
true at that point of the code. The variable is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.12-2021-03-31:
amdgpu:
- Polaris idle power fix
- VM fix
- Vangogh S3 fix
- Fixes for non-4K page sizes
amdkfd:
- dqm fence memory corruption fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401020057.17831-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Just one cleanup which drops of_gpio.h inclusion.
- This header file isn't used anymore so drop it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1617016858-14081-1-git-send-email-inki.dae@samsung.com
|
|
The page table of AMDGPU requires an alignment to CPU page so we should
check ioctl parameters for it. Return -EINVAL if some parameter is
unaligned to CPU page, instead of corrupt the page table sliently.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
In Mesa, dev_info.gart_page_size is used for alignment and it was
set to AMDGPU_GPU_PAGE_SIZE(4KB). However, the page table of AMDGPU
driver requires an alignment on CPU pages. So, for non-4KB page system,
gart_page_size should be max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE).
Signed-off-by: Rui Wang <wangr@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Link: https://github.com/loongson-community/linux-stable/commit/caa9c0a1
[Xi: rebased for drm-next, use max_t for checkpatch,
and reworded commit message.]
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1549
Tested-by: Dan Horák <dan@danny.cz>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Do the same thing we do for Renoir. We can check, but since
the sbios has started DPM, it will always return true which
causes the driver to skip some of the SMU init when it shouldn't.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Amdgpu driver uses 4-byte data type as DQM fence memory,
and transmits GPU address of fence memory to microcode
through query status PM4 message. However, query status
PM4 message definition and microcode processing are all
processed according to 8 bytes. Fence memory only allocates
4 bytes of memory, but microcode does write 8 bytes of memory,
so there is a memory corruption.
Changes since v1:
* Change dqm->fence_addr as a u64 pointer to fix this issue,
also fix up query_status and amdkfd_fence_wait_timeout function
uses 64 bit fence value to make them consistent.
Signed-off-by: Qu Huang <jinsdb@126.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
For multiple split bios, if one of the bio is fail, the whole
should return error to application. But we found there is a race
between bio_integrity_verify_fn and bio complete, which return
io success to application after one of the bio fail. The race as
following:
split bio(READ) kworker
nvme_complete_rq
blk_update_request //split error=0
bio_endio
bio_integrity_endio
queue_work(kintegrityd_wq, &bip->bip_work);
bio_integrity_verify_fn
bio_endio //split bio
__bio_chain_endio
if (!parent->bi_status)
<interrupt entry>
nvme_irq
blk_update_request //parent error=7
req_bio_endio
bio->bi_status = 7 //parent bio
<interrupt exit>
parent->bi_status = 0
parent->bi_end_io() // return bi_status=0
The bio has been split as two: split and parent. When split
bio completed, it depends on kworker to do endio, while
bio_integrity_verify_fn have been interrupted by parent bio
complete irq handler. Then, parent bio->bi_status which have
been set in irq handler will overwrite by kworker.
In fact, even without the above race, we also need to conside
the concurrency beteen mulitple split bio complete and update
the same parent bi_status. Normally, multiple split bios will
be issued to the same hctx and complete from the same irq
vector. But if we have updated queue map between multiple split
bios, these bios may complete on different hw queue and different
irq vector. Then the concurrency update parent bi_status may
cause the final status error.
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210331115359.1125679-1-yuyufen@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
xdp_return_frame() may be called outside of NAPI context to return
xdpf back to page_pool. xdp_return_frame() calls __xdp_return() with
napi_direct = false. For page_pool memory model, __xdp_return() calls
xdp_return_frame_no_direct() unconditionally and below false negative
kernel BUG throw happened under preempt-rt build:
[ 430.450355] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/3884
[ 430.451678] caller is __xdp_return+0x1ff/0x2e0
[ 430.452111] CPU: 0 PID: 3884 Comm: modprobe Tainted: G U E 5.12.0-rc2+ #45
Changes in v2:
- This patch fixes the issue by making xdp_return_frame_no_direct() is
only called if napi_direct = true, as recommended for better by
Jesper Dangaard Brouer. Thanks!
Fixes: 2539650fadbf ("xdp: Helpers for disabling napi_direct of xdp_return_frame")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit f211ac154577ec9ccf07c15f18a6abf0d9bdb4ab.
We had similar attempt in the past, and we reverted it.
History:
64a146513f8f12ba204b7bf5cb7e9505594ead42 [NET]: Revert incorrect accept queue backlog changes.
8488df894d05d6fa41c2bd298c335f944bb0e401 [NET]: Fix bugs in "Whether sock accept queue is full" checking
I am adding a fat comment so that future attempts will
be much harder.
Fixes: f211ac154577 ("net: correct sk_acceptq_is_full()")
Cc: iuyacan <yacanliu@163.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-03-31
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-03-31
1) Fix ipv4 pmtu checks for xfrm anf vti interfaces.
From Eyal Birger.
2) There are situations where the socket passed to
xfrm_output_resume() is not the same as the one
attached to the skb. Use the socket passed to
xfrm_output_resume() to avoid lookup failures
when xfrm is used with VRFs.
From Evan Nimmo.
3) Make the xfrm_state_hash_generation sequence counter per
network namespace because but its write serialization
lock is also per network namespace. Write protection
is insufficient otherwise.
From Ahmed S. Darwish.
4) Fixup sctp featue flags when used with esp offload.
From Xin Long.
5) xfrm BEET mode doesn't support fragments for inner packets.
This is a limitation of the protocol, so no fix possible.
Warn at least to notify the user about that situation.
From Xin Long.
6) Fix NULL pointer dereference on policy lookup when
namespaces are uses in combination with esp offload.
7) Fix incorrect transformation on esp offload when
packets get segmented at layer 3.
8) Fix some user triggered usages of WARN_ONCE in
the xfrm compat layer.
From Dmitry Safonov.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rds_message_map_pages, the rm is freed by rds_message_put(rm).
But rm is still used by rm->data.op_sg in return value.
My patch assigns ERR_CAST(rm->data.op_sg) to err before the rm is
freed to avoid the uaf.
Fixes: 7dba92037baf3 ("net/rds: Use ERR_PTR for rds_message_alloc_sgs()")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After a short network outage, the dst_entry is timed out and put
in DST_OBSOLETE_DEAD. We are in this code because arp reply comes
from this neighbour after network recovers. There is a potential
race condition that dst_entry is still in DST_OBSOLETE_DEAD.
With that, another neighbour lookup causes more harm than good.
In best case all packets in arp_queue are lost. This is
counterproductive to the original goal of finding a better path
for those packets.
I observed a worst case with 4.x kernel where a dst_entry in
DST_OBSOLETE_DEAD state is associated with loopback net_device.
It leads to an ethernet header with all zero addresses.
A packet with all zero source MAC address is quite deadly with
mac80211, ath9k and 802.11 block ack. It fails
ieee80211_find_sta_by_ifaddr in ath9k (xmit.c). Ath9k flushes tx
queue (ath_tx_complete_aggr). BAW (block ack window) is not
updated. BAW logic is damaged and ath9k transmission is disabled.
Signed-off-by: Tong Zhu <zhutong@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
XSK wakeup flow triggers an IRQ by posting a NOP WQE and hitting
the doorbell on the async ICOSQ.
It maintains its state so that it doesn't issue another NOP WQE
if it has an outstanding one already.
For this flow to work properly, the NOP post must not fail.
Make sure to reserve room for the NOP WQE in all WQE posts to the
async ICOSQ.
Fixes: 8d94b590f1e4 ("net/mlx5e: Turn XSK ICOSQ into a general asynchronous one")
Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Current algorithm for encap keys is legacy from initial vxlan
implementation and doesn't take into account all possible fields of a
tunnel. For example, for a Geneve tunnel, which may have additional TLV
options, they are ignored when comparing encap keys and a rule can be
attached to an incorrect encap entry.
Fix that by introducing encap_info_equal() operation in
struct mlx5e_tc_tunnel. Geneve tunnel type uses custom implementation,
which extends generic algorithm and considers options if they are set.
Fixes: 7f1a546e3222 ("net/mlx5e: Consider tunnel type for encap contexts")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Calculating the number of compeltion EQs based on the number of
available IRQ vectors doesn't work now that all async EQs share one IRQ.
Thus the max number of EQs can be exceeded on systems with more than
approximately 256 CPUs. Take this into account when calculating the
number of available completion EQs.
Fixes: 81bfa206032a ("net/mlx5: Use a single IRQ for all async EQs")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Some TLS RX counters increment per socket/connection, and are not
protected against parallel modifications from several cores.
Switch them to atomic counters by taking them out of the RQ stats into
the global atomic TLS stats.
In this patch, we touch 'rx_tls_ctx/del' that count the number of
device-offloaded RX TLS connections added/deleted.
These counters are updated in the add/del callbacks, out of the fast
data-path.
This change is not needed for counters that increment only in NAPI
context, as they are protected by the NAPI mechanism.
Keep them as tls_* counters under 'struct mlx5e_rq_stats'.
Fixes: 76c1e1ac2aae ("net/mlx5e: kTLS, Add kTLS RX stats")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Some TLS TX counters increment per socket/connection, and are not
protected against parallel modifications from several cores.
Switch them to atomic counters by taking them out of the SQ stats into
the global atomic TLS stats.
In this patch, we touch a single counter 'tx_tls_ctx' that counts the
number of device-offloaded TX TLS connections added.
Now that this counter can be increased without the for having the SQ
context in hand, move it to the mlx5e_ktls_add_tx() callback where it
really belongs, out of the fast data-path.
This change is not needed for counters that increment only in NAPI
context or under the TX lock, as they are already protected.
Keep them as tls_* counters under 'struct mlx5e_sq_stats'.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Create send to vport miss group was added in order to support traffic
recirculation to root table with metadata source rewrite.
This group is created also in case source rewrite isn't supported.
Fixed by creating send to vport miss group only if source rewrite is
supported by FW.
Fixes: 8e404fefa58b ("net/mlx5e: Match recirculated packet miss in slow table using reg_c1")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Use connector_type read from PTYS register when it's valid, based on
corresponding capability bit.
Fixes: 5b4793f81745 ("net/mlx5e: Add support for reading connector type from PTYS")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Delete auxiliary bus drivers flow deletes the eth driver
first and then the eth-reps driver but eth-reps devices resources
are depend on eth device.
Fixed by changing the delete order of auxiliary bus drivers to delete
the eth-rep driver first and after it the eth driver.
Fixes: 601c10c89cbb ("net/mlx5: Delete custom device management logic")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
ct_label 0 is a default label each flow has and therefore
there can be rules that match on ct_label=0 without a prior
rule that set the ct_label to this value.
The ct_label value is not used directly in the HW rules and
instead it is mapped to some id within a defined range and this
id is used to set and match the metadata register which carries
the ct_label.
If we have a rule that matches on ct_label=0, the hw rule will
perform matching on a value that is != 0 because of the mapping
from label to id. Since the metadata register default value is
0 and it was never set before to anything else by an action that
sets the ct_label, there will always be a mismatch between that
register and the value in the rule.
To support such rule, a forced mapping of ct_label 0 to id=0
is done so that it will match the metadata register default
value of 0.
Fixes: 54b154ecfb8c ("net/mlx5e: CT: Map 128 bits labels to 32 bit map ID")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Add check of order < 0 before calling free_pages()
The function addresses that are traced by ftrace are stored in pages,
and the size is held in a variable. If there's some error in creating
them, the allocate ones will be freed. In this case, it is possible
that the order of pages to be freed may end up being negative due to a
size of zero passed to get_count_order(), and then that negative
number will cause free_pages() to free a very large section.
Make sure that does not happen"
* tag 'trace-v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Check if pages were allocated before calling free_pages()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some overly ripe fixes for the v5.12 kernel. I should have sent
earlier but had my head stuck in GDB.
All are driver fixes:
- Fix up some Intel GPIO base calculations.
- Fix a register offset in the Microchip driver.
- Fix suspend/resume bug in the Rockchip driver.
- Default pull up strength in the Qualcomm LPASS driver.
- Fix two pingroup offsets in the Qualcomm SC7280 driver.
- Fix SDC1 register offset in the Qualcomm SC7280 driver.
- Fix a nasty string concatenation in the Qualcomm SDX55 driver.
- Check the REVID register to see if the device is real or
virtualized during virtualization in the Intel driver"
* tag 'pinctrl-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: check REVID register value for device presence
pinctrl: qcom: fix unintentional string concatenation
pinctrl: qcom: sc7280: Fix SDC1_RCLK configurations
pinctrl: qcom: sc7280: Fix SDC_QDSD_PINGROUP and UFS_RESET offsets
pinctrl: qcom: lpass lpi: use default pullup/strength values
pinctrl: rockchip: fix restore error in resume
pinctrl: microchip-sgpio: Fix wrong register offset for IRQ trigger
pinctrl: intel: Show the GPIO base calculation explicitly
|
|
card->owner is a required property and since commit 81033c6b584b ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Add it.
This fixes following warning observed on Lamobo R1:
WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd]
Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ...
CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G C E 5.10.0-1-armmp #1 Debian 5.10.4-1
Hardware name: Allwinner sun7i (A20) Family
Call trace:
(snd_card_new [snd])
(snd_soc_bind_card [snd_soc_core])
(snd_soc_register_card [snd_soc_core])
(sun4i_codec_probe [sun4i_codec])
Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs")
Related: commit 3c27ea23ffb4 ("ASoC: qcom: Set card->owner to avoid warnings")
Related: commit ec653df2a0cb ("drm/vc4/vc4_hdmi: fill ASoC card owner")
Cc: linux-arm-kernel@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Bastian Germann <bage@linutronix.de>
Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
