summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-10regulator: add a summary tree in debugfsHeiko Stübner
On modern systems the regulator hierarchy can get quite long and nested with regulators supplying other regulators. In some cases when debugging it might be nice to get a tree of these regulators, their consumers and the regulation constraints in one go. To achieve this add a regulator_summary sysfs node, similar to clk_summary in the common clock framework, that walks the regulator list and creates a tree out of the regulators, their consumers and core per-regulator settings. On a rk3288-firefly the regulator_summary would for example look something like: regulator use open bypass value min max ----------------------------------------------------------------------- vcc_sys 0 12 0 5000mV 5000mV 5000mV vcc_lan 1 1 0 3300mV 3300mV 3300mV ff290000.ethernet 0mV 0mV vcca_33 0 0 0 3300mV 3300mV 3300mV vcca_18 0 0 0 1800mV 1800mV 1800mV vdd10_lcd 0 0 0 1000mV 1000mV 1000mV vccio_sd 0 0 0 3300mV 3300mV 3300mV vcc_20 0 3 0 2000mV 2000mV 2000mV vcc18_lcd 0 0 0 1800mV 1800mV 1800mV vcc_18 0 2 0 1800mV 1800mV 1800mV ff100000.saradc 0mV 0mV ff0d0000.dwmmc 1650mV 1950mV vdd_10 0 0 0 1000mV 1000mV 1000mV vdd_log 0 0 0 1100mV 1100mV 1100mV vcc_io 0 3 0 3300mV 3300mV 3300mV ff0f0000.dwmmc 3300mV 3400mV vcc_flash 1 1 0 1800mV 1800mV 1800mV ff0f0000.dwmmc 1700mV 1950mV vcc_sd 1 1 0 3300mV 3300mV 3300mV ff0c0000.dwmmc 3300mV 3400mV vcc_ddr 0 0 0 1200mV 1200mV 1200mV vdd_gpu 0 0 0 1000mV 850mV 1350mV vdd_cpu 0 1 0 900mV 850mV 1350mV cpu0 900mV 900mV vcc_5v 0 2 0 5000mV 5000mV 5000mV vcc_otg_5v 0 0 0 5000mV 5000mV 5000mV vcc_host_5v 0 0 0 5000mV 5000mV 5000mV regulator-dummy 0 0 0 0mV 0mV 0mV Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-10perf evlist: Fix type for references to data_head/tailDavid Ahern
The data_head and data_tail fields are defined as __u64 in linux/perf_event.h, but perf userspace uses int and unsigned int. Convert all references to u64 for consistency. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1428420037-26599-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10ACPI / scan: Take the PRP0001 position in the list of IDs into accountRafael J. Wysocki
If the special PRP0001 device ID is present in a device's _CID list, it should not prevent any ACPI/PNP IDs preceding it in the device's list of identifiers from being matched first. That is, only if none of the IDs preceding PRP0001 in the device's PNP/ACPI IDs list matches the IDs recognized by the driver, the driver's list of "compatible" IDs should be matched against the device's "compatible" property, if present. In addition to that, drivers can provide both acpi_match_table and of_match_table at the same time and the of_compatible matching should be used in that case too if PRP0001 is present in the device's list of identifiers. To make that happen, rework acpi_driver_match_device() to do the "compatible" property check in addition to matching the driver's list of ACPI IDs against the device's one. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-04-10ACPI / scan: Simplify acpi_match_device()Rafael J. Wysocki
Redefine acpi_companion_match() to return an ACPI device object pointer instead of a bool and use it to remove some redundant code from acpi_match_device(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-04-10ACPI / scan: Generalize of_compatible matchingRafael J. Wysocki
Redefine the function used for matching the device's "compatible" property against a given list of "compatible" strings to take a pointer to that list instead of a driver object pointer to make it more general. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-04-10KVM: use slowpath for cross page cached accessesRadim Krčmář
kvm_write_guest_cached() does not mark all written pages as dirty and code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot with cross page accesses. Fix all the easy way. The check is '<= 1' to have the same result for 'len = 0' cache anywhere in the page. (nr_pages_needed is 0 on page boundary.) Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <20150408121648.GA3519@potion.brq.redhat.com> Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-10Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI: Read capability list as dwords, not bytes PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message
2015-04-10Merge branches 'pci/host-exynos', 'pci/host-iproc', 'pci/host-keystone', ↵Bjorn Helgaas
'pci/host-layerscape', 'pci/host-mvebu', 'pci/host-rcar' and 'pci/host-versatile' into next * pci/host-exynos: PCI: exynos: Fix INTx enablement statement termination error * pci/host-iproc: PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules * pci/host-keystone: PCI: keystone: Don't dereference possible NULL pointer * pci/host-layerscape: PCI: layerscape: Simplify platform_get_resource_byname() failure checking * pci/host-mvebu: PCI: mvebu: Add suspend/resume support * pci/host-rcar: PCI: rcar: Verify that mem_res is 64K-aligned PCI: rcar: Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR PCI: rcar: Write zeroes to reserved PCIEPARL bits PCI: rcar: Fix position of MSI enable bit * pci/host-versatile: PCI: versatile: Check for devm_ioremap_resource() failures
2015-04-10perf probe: Check the orphaned -x optionMasami Hiramatsu
To avoid probing in unintended binary, the orphaned -x option must be checked and warned. Without this patch, following command sets up the probe in the kernel. ----- # perf probe -a strcpy -x ./perf Added new event: probe:strcpy (on strcpy) You can now use it in all perf tools, such as: perf record -e probe:strcpy -aR sleep 1 ----- But in this case, it seems that the user may want to probe in the perf binary. With this patch, perf-probe correctly handles the orphaned -x. ----- # perf probe -a strcpy -x ./perf Error: -x/-m must follow the probe definitions. ... ----- Reported-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150401102541.17137.75477.stgit@localhost.localdomain Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10perf probe: Support multiple probes on different binariesMasami Hiramatsu
Support multiple probes on different binaries with just one command. In the result, this example sets up the probes on icmp_rcv in kernel, on main and set_target in perf, and on pcspkr_event in pcspker.ko driver. ----- # perf probe -a icmp_rcv -x ./perf -a main -a set_target \ -m /lib/modules/4.0.0-rc5+/kernel/drivers/input/misc/pcspkr.ko \ -a pcspkr_event Added new event: probe:icmp_rcv (on icmp_rcv) You can now use it in all perf tools, such as: perf record -e probe:icmp_rcv -aR sleep 1 Added new event: probe_perf:main (on main in /home/mhiramat/ksrc/linux-3/tools/perf/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:main -aR sleep 1 Added new event: probe_perf:set_target (on set_target in /home/mhiramat/ksrc/linux-3/tools/perf/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:set_target -aR sleep 1 Added new event: probe:pcspkr_event (on pcspkr_event in pcspkr) You can now use it in all perf tools, such as: perf record -e probe:pcspkr_event -aR sleep 1 ----- Reported-by: Arnaldo Carvalho de Melo <acme@infradead.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150401102539.17137.46454.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10perf buildid-list: Fix segfault when show DSOs with hitsHe Kuang
commit: f3b623b8490a ("perf tools: Reference count struct thread") appends every thread->node to dead_threads in machine__remove_thread() and list_del_init() this node in thread__put(). perf_event__exit_del_thread() releases thread wihout using machine__remove_thread(), and causes a NULL pointer crash when list_del_init(&thread->node) is called. Fix this by using machine_remove_thread() instead of using thread__put() directly. This problem can be reproduced as following: $ perf record ls $ perf buildid-list --with-hits [ 3874.195070] perf[1018]: segfault at 0 ip 00000000004b0b15 sp 00007ffc35b44780 error 6 in perf[400000+166000] Segmentation fault After this patch: $ perf record ls $ perf buildid-list --with-hits bc23e7c3281e542650ba4324421d6acf78f4c23e /proc/kcore 643324cb0e969f30c56d660f167f84a150845511 [vdso] 0000000000000000000000000000000000000000 /bin/busybox ... Signed-off-by: He Kuang <hekuang@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1428658500-6483-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10perf tools: Fix cross-endian analysisDavid Ahern
Trying to analyze a big endian data file on little endian system fails with the error: 0xa9b40 [0x70]: failed to process type: 9 The problem is that header parsing is not done correctly because the file attributes are not swapped. Make it so. With this patch able to analyze a sparc64 data file on x86_64. Signed-off-by: David Ahern <david.ahern@oracle.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1428610546-178789-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10perf tools: Fix error path to do closedir() when synthesizing threadsArnaldo Carvalho de Melo
When traversing /proc to synthesize the PERF_RECORD_FORK et al events we were bailing out on errors without calling closedir(), fix it. Reported-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-vxtp593rfztgbi8noy0m967p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10perf tools: Fix synthesizing fork_event.ppid for non-main threadDavid Ahern
Commit ca6c41c59b9 sets the ppid based on what is read from the /proc/pid/status file when synthesizing fork events. This is correct thing to do for new processes but not threads of a process. Fix ppid for threads to be the main thread when synthesizing fork events (ie., assume main thread spawned all sub-threads in a process). Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Signed-off-by: David Ahern <david.ahern@oracle.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1428598107-178999-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10drivers/usb/core: devio.c: Removed an uneeded space before tabChase Metzger
Ran checkpatch.pl on file and removed a warning about an unwanted space before a tab. Signed-off-by: Chase Metzger <chasemetzger15@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resumeGregory Herrero
msleep(USB_RESUME_TIMEOUT) must be done when the controller drives the resume. This is true after HPRT0_RES is written. Moreover, restore the delay after controller power is up. Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10Merge tag 'usb-ci-v4.1-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Two Chipidea updates - Forbid dumpping registers when the controller in low power mode - dp pullup needs to be controlled by fsm when working at otg fsm mode
2015-04-10Merge tag 'for-4.1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: New Features ============ *) Add driver for USB PHYs on sun9i *) Add driver for USB PHY on dm816x *) Modified exynos5-usbdrd driver to add support for Exynos5433 SoC Fixes ===== *) Fix power_on/power_off failure paths in some drivers *) Make miphy365x use generic PHY type constants *) Fix build errors due to missing export symbols in qcom-ufs driver *) Make all the functions return proper error values Cleanups ======== *) use PTR_ERR_OR_ZERO to simplify code *) use devm_kcalloc instead of devm_kzalloc with multiply *) remove un-necessary ifdef CONFIG_OF
2015-04-10Merge tag 'usb-for-v4.1-part2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing Felipe writes: usb: generic resume timeout for v4.1 This part 2 pull request contains only the patches which make sure everybody on linux uses the same resume timeout value. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-10mmc: sdhci-st: Update ST SDHCI binding documentation.Peter Griffin
This patch updates the binding information to reflect the extra dt options which are now supported by the sdhci-st.c driver which enable support for stih407 family silicon. STiH410 SoC and later support UHS modes for eMMC, so the driver now makes use of these common bindings. Examples are provided for both eMMC (which has additional bindings) and also sd slot for STiH407. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Update the quirks for this controller.Peter Griffin
Some additional quirks need to be enabled now we support UHS modes. This avoids some spurious warnings like "Got data interrupt 0x00000002 even though no data operation was in progress" Testing on stih410-b2120 board achieves the following speeds with HS200 eMMC card. max-frequency = 200Mhz /dev/mmcblk0p1: Timing buffered disk reads: 270 MB in 3.02 seconds = 89.54 MB/sec max-frequency = 100Mhz root@debian-armhf:~# hdparm -t /dev/mmcblk0p1 /dev/mmcblk0p1: Timing buffered disk reads: 210 MB in 3.00 seconds = 70.00 MB/sec max-frequency = 50Mhz root@debian-armhf:~# hdparm -t /dev/mmcblk0p1 /dev/mmcblk0p1: Timing buffered disk reads: 118 MB in 3.00 seconds = 39.28 MB/sec This is better than the 3.10 kernel which achieves 77.59 MB/sec at 200Mhz clock (same board/soc/eMMC). Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function.Peter Griffin
To allow UHS modes to work properly we need to provide the st specific set_uhs_signaling callback function. This function differs from the generic sdhci_set_uhs_signaling callback in that we need to configure the correct delay depending on the UHS mode, and also set the V18_EN bit. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers.Peter Griffin
STiH407 family SoC's have glue registers in the flashSS subsystem which are used to configure the Arasan HC. This patch configures these glue registers according to what has been specified in the DT. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add delay management functions for top registers (eMMC).Peter Griffin
Due to the tight timing constraints in some UHS modes, it is required to have some delay management in the design. Two types of delay management are supported in the HW: - 1) Static delay management 2) Dynamic delay management NB: The delay management is only there when eMMC interface is selected. 1: Static delay management: is used to provide PVT dependent static delay on the clock/data lines to manage setup/hold requirements of the interface. The maximum delay possible is 3.25ns. These delays are PVT dependent, and thus delay values applied are not accurate and vary across provcess voltage and temperature range. Due to this these delays must not be used on the very time critical paths. 2. Dynamic delay locked loop (DLL): is used to provide dynamic delay management. The advantage of DLL is that it provides accurate & PVT indepedent delay. The DLL is used to provide delay on the loopback clock on "Read Path" to capture read data reliably. On TX path the clock on which output data is transmitted is delayed, resulting in delay of TX data. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add support for de-asserting reset signal and top regs resourcePeter Griffin
STiH407 family SoC's can have a reset signal for the controller which needs to be managed. Also the eMMC controller has some additional 'top' memory mapped registers which are used to manage the dynamic and static delay required for UHS modes. This patch adds support for creating the mapping, which will be used by subsequent patches. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regsPeter Griffin
The stih407 family SoC's have additional glue registers in the flashSS which are used to configure the Arasan controller. This patch adds macros for the register offsets and bitfields which will be used by subsequent patches to support stih407 family SoC's. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10Merge back earlier suspend/hibernate material for v4.1.Rafael J. Wysocki
2015-04-10Merge back earlier cpuidle material for v4.1.Rafael J. Wysocki
2015-04-10Merge back earlier cpufreq material for v4.1.Rafael J. Wysocki
2015-04-10x86/apic/uv: Update the UV APIC HUB checkMike Travis
Update the check for UV2000/3000. Note when the HUB is not recognized. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/20150409182629.267239403@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-10x86/apic/uv: Update the UV APIC driver checkMike Travis
Fix a bug in the OEM check function that determines if the system is a UV system and the BIOS is compatible with the kernel's UV apic driver. This prevents some possibly obscure panics and guards the system against being started on SGI hardware that does not have the required kernel support. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/20150409182629.112998930@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-10x86/apic/uv: Update the APIC UV OEM checkMike Travis
Optimize the first "SGI" OEM check to return faster if the system is not an SGI or UV system. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/20150409182628.952357922@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-10md/raid0: fix bug with chunksize not a power of 2.NeilBrown
Since commit 20d0189b1012a37d2533a87fb451f7852f2418d1 in v3.14-rc1 RAID0 has performed incorrect calculations when the chunksize is not a power of 2. This happens because "sector_div()" modifies its first argument, but this wasn't taken into account in the patch. So restore that first arg before re-using the variable. Reported-by: Joe Landman <joe.landman@gmail.com> Reported-by: Dave Chinner <david@fromorbit.com> Fixes: 20d0189b1012a37d2533a87fb451f7852f2418d1 Cc: stable@vger.kernel.org (3.14 and later). Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-10nios2: fix cache coherency issue when debug with gdbLey Foon Tan
Remove the end address checking for flushda function. We need to flush each address line for flushda instruction, from start to end address. This is because flushda instruction only flush the cache if tag and line fields are matched. Change to use ldwio instruction (bypass cache) to load the instruction that causing trap. Our interest is the actual instruction that executed by the processor, this should be uncached. Note, EA address might be an userspace cached address. Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-09Merge tag 'pm+acpi-4.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are stable-candidate fixes of some recently reported issues in the cpufreq core, cpuidle core, the ACPI cpuidle driver and the hibernate core. Specifics: - Revert a 3.17 hibernate commit that was supposed to fix an issue related to e820 reserved regions, but broke resume from hibernation on Lenovo x230 (Rafael J Wysocki). - Prevent the ACPI cpuidle driver from overwriting the name and description of the C0 state set by the core when the list of C-states changes (Thomas Schlichter). - Remove the no longer needed state_count field from struct cpuidle_device which prevents the list of C-states shown by the sysfs interface from becoming incorrect when the current number of them is different from the number of C-states on boot (Bartlomiej Zolnierkiewicz). - The cpufreq core updates the policy object of the only online CPU during system resume to make it reflect the current hardware state, but it always assumes that CPU to be CPU0 which need not be the case, so fix the code to avoid that assumption (Viresh Kumar)" * tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device cpufreq: Schedule work for the first-online CPU on resume
2015-04-09PCI: Read capability list as dwords, not bytesSean O. Stalley
Reading both the capability ID and "next" pointer at the same time lets us parse the list with half the number of config reads. Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09Merge branches 'pm-sleep', 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki
* pm-sleep: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" * pm-cpufreq: cpufreq: Schedule work for the first-online CPU on resume * pm-cpuidle: cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device
2015-04-09PCI: layerscape: Simplify platform_get_resource_byname() failure checkingBjorn Helgaas
devm_ioremap_resource() validates the resource it receives, so if we check for devm_ioremap_resource() failure, we need not check for failure of the preceding platform_get_resource(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: keystone: Don't dereference possible NULL pointerBjorn Helgaas
Check for failure from platform_get_resource() (this check actually happens inside devm_ioremap_resource()) before dereferencing the pointer returned from platform_get_resource(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: versatile: Check for devm_ioremap_resource() failuresJisheng Zhang
Check for failure of devm_ioremap_resource(). devm_ioremap_resource() validates the resource it receives, so if we check for devm_ioremap_resource() failure, we need not check for failure of the preceding platform_get_resource(). [bhelgaas: changelog] Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: Don't clear ASPM bits when the FADT declares it's unsupportedMatthew Garrett
Communications with a hardware vendor confirm that the expected behaviour on systems that set the FADT ASPM disable bit but which still grant full PCIe control is for the OS to leave any BIOS configuration intact and refuse to touch the ASPM bits. This mimics the behaviour of Windows. Signed-off-by: Matthew Garrett <mjg59@coreos.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: Clarify policy for vendor IDs in pci.txtMichael S. Tsirkin
Clarify pci.txt so it matches the "do not add new entries unless they are shared between multiple drivers" comment in include/linux/pci_ids.h. [bhelgaas: changelog, strengthen language] Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09Merge tag 'pci-v4.0-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are some fixes for v4.0. I apologize for how late they are. We were hoping for some better fixes, but couldn't get them polished in time. These fix: - a Xen domU oops with PCI passthrough devices - a sparc T5 boot failure - a STM SPEAr13xx crash (use after initdata freed) - a cpcihp hotplug driver thinko - an AER thinko that printed stack junk Details: Enumeration - Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas) Resource management - Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas) AER - Avoid info leak in __print_tlp_header() (Rasmus Villemoes) PCI device hotplug - Add missing curly braces in cpci_configure_slot() (Dan Carpenter) ST Microelectronics SPEAr13xx host bridge driver - Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov) * tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" PCI: Don't look for ACPI hotplug parameters if ACPI is disabled PCI: cpcihp: Add missing curly braces in cpci_configure_slot() PCI/AER: Avoid info leak in __print_tlp_header() PCI: spear: Drop __initdata from spear13xx_pcie_driver
2015-04-09ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob supportDmitry M. Fedin
Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-09hwmon: (it87) Use feature macros on sio_dataGuenter Roeck
Feature macros work on sio_data as well, so use them there. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-09ocfs2: _really_ sync the right rangeAl Viro
"ocfs2 syncs the wrong range" had been broken; prior to it the code was doing the wrong thing in case of O_APPEND, all right, but _after_ it we were syncing the wrong range in 100% cases. *ppos, aka iocb->ki_pos is incremented prior to that point, so we are always doing sync on the area _after_ the one we'd written to. Spotted by Joseph Qi <joseph.qi@huawei.com> back in January; unfortunately, I'd missed his mail back then ;-/ Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-09nios2: add missing ptrace registers definesLey Foon Tan
These are all register available in nios2. Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-09backlight: da9052_bl: Terminate da9052_wled_ids array with empty elementAndrey Ryabinin
Array of platform_device_id elements should be terminated with empty element. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-04-09backlight: 88pm860x_bl: Use of_get_child_by_name() instead of refcount hackGeert Uytterhoeven
of_find_node_by_name() calls of_node_put() on its "from" parameter. To counter this, pm860x_backlight_dt_init() calls of_node_get() first. Use of_get_child_by_name() instead to get rid of the refcount hack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-04-09mfd: sec: Fix RTC alarm interrupt number on S2MPS11Krzysztof Kozlowski
The RTC on S2MPS11 is the same as S2MPS14. However interrupt numbers of RTC alarms 0 and 1 were inversed between these two devices. So when rtc-s5m driver requested S2MPS14_IRQ_RTCA0 interrupt, it matched to S2MPS11_IRQ_RTCA1, not RTCA0. Fix this by using consistent RTC alarm interrupt numbers and adding a BUILD_BUG_ON for future generations. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-16 20:55:51 +0000