| Age | Commit message (Collapse) | Author |
|---|
|
In __ufshcd_issue_tm_cmd(), it is not correct to use hba->nutrs + req->tag
as the Task Tag in a TMR UPIU. Directly use req->tag as the Task Tag.
Fixes: e293313262d3 ("scsi: ufs: Fix broken task management command implementation")
Link: https://lore.kernel.org/r/1617262750-4864-3-git-send-email-cang@codeaurora.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_tmc_handler() calls blk_mq_tagset_busy_iter(fn = ufshcd_compl_tm()),
but since blk_mq_tagset_busy_iter() only iterates over all reserved tags
and requests which are not in IDLE state, ufshcd_compl_tm() never gets a
chance to run. Thus, TMR always ends up with completion timeout. Fix it by
calling blk_mq_start_request() in __ufshcd_issue_tm_cmd().
Link: https://lore.kernel.org/r/1617262750-4864-2-git-send-email-cang@codeaurora.org
Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/20210330071958.3788214-3-slyfox@gentoo.org
Fixes: f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds")
CC: linux-ia64@vger.kernel.org
CC: storagedev@microchip.com
CC: linux-scsi@vger.kernel.org
CC: Joe Szczypek <jszczype@redhat.com>
CC: Scott Benesh <scott.benesh@microchip.com>
CC: Scott Teel <scott.teel@microchip.com>
CC: Tomas Henzl <thenzl@redhat.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Don Brace <don.brace@microchip.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Suggested-by: Don Brace <don.brace@microchip.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Boot failure was observed on an HP rx3600 ia64 machine with RAID bus
controller: Hewlett-Packard Company Smart Array P600:
kernel unaligned access to 0xe000000105dd8b95, ip=0xa000000100b87551
kernel unaligned access to 0xe000000105dd8e95, ip=0xa000000100b87551
hpsa 0000:14:01.0: Controller reports max supported commands of 0 Using 16 instead. Ensure that firmware is up to date.
swapper/0[1]: error during unaligned kernel access
The unaligned access comes from 'struct CommandList' that happens to be
packed. Commit f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for
retried cmds") introduced unexpected padding and unaligned atomic_t from
natural alignment to something else.
This change removes packing annotation from a struct not intended to be
sent to controller as is. This restores natural `atomic_t` alignment.
The change was tested on the same rx3600 machine.
Link: https://lore.kernel.org/r/20210330071958.3788214-2-slyfox@gentoo.org
Fixes: f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds")
CC: linux-ia64@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: storagedev@microchip.com
CC: linux-scsi@vger.kernel.org
CC: Joe Szczypek <jszczype@redhat.com>
CC: Scott Benesh <scott.benesh@microchip.com>
CC: Scott Teel <scott.teel@microchip.com>
CC: Tomas Henzl <thenzl@redhat.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Don Brace <don.brace@microchip.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Suggested-by: Don Brace <don.brace@microchip.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The hpsa driver uses data structures which contain a combination of driver
internals and commands sent directly to the hardware. To manage alignment
for the hardware portions the driver used #pragma pack(1).
Commit f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried
cmds") switched an existing variable from int to bool. Due to the pragma an
atomic_t in the same data structure ended up being misaligned and broke
boot on ia64.
Add __packed to every struct and union in the header file. Subsequent
commits will address the actual atomic_t misalignment regression.
The commit is a no-op at least on ia64:
$ diff -u <(objdump -d -r old.o) <(objdump -d -r new.o)
Link: https://lore.kernel.org/r/20210330071958.3788214-1-slyfox@gentoo.org
Fixes: f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds")
CC: linux-ia64@vger.kernel.org
CC: storagedev@microchip.com
CC: linux-scsi@vger.kernel.org
CC: Joe Szczypek <jszczype@redhat.com>
CC: Scott Benesh <scott.benesh@microchip.com>
CC: Scott Teel <scott.teel@microchip.com>
CC: Tomas Henzl <thenzl@redhat.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Don Brace <don.brace@microchip.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Suggested-by: Don Brace <don.brace@microchip.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull LTO fix from Kees Cook:
"It seems that there is a bug in ld.bfd when doing module section
merging.
As explicit merging is only needed for LTO, the work-around is to only
do it under LTO, leaving the original section layout choices alone
under normal builds:
- Only perform explicit module section merges under LTO (Sean
Christopherson)"
* tag 'lto-v5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: lto: Merge module sections if and only if CONFIG_LTO_CLANG is enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-04-01
This series contains updates to i40e driver only.
Arkadiusz fixes warnings for inconsistent indentation.
Magnus fixes an issue on xsk receive where single packets over time
are batched rather than received immediately.
Eryk corrects warnings and reporting of veb-stats.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paolo Abeni says:
====================
mptcp: mptcp: fix deadlock in mptcp{,6}_release
syzkaller has reported a few deadlock triggered by
mptcp{,6}_release.
These patches address the issue in the easy way - blocking
the relevant, multicast related, sockopt options on MPTCP
sockets.
Note that later on net-next we are going to revert patch 1/2,
as a part of a larger MPTCP sockopt implementation refactor
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change reverts commit ad98dd37051e ("mptcp: provide subflow aware
release function"). The latter introduced a deadlock spotted by
syzkaller and is not needed anymore after the previous commit.
Fixes: ad98dd37051e ("mptcp: provide subflow aware release function")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unrolling mcast state at msk dismantel time is bug prone, as
syzkaller reported:
======================================================
WARNING: possible circular locking dependency detected
5.11.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor905/8822 is trying to acquire lock:
ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323
but task is already holding lock:
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline]
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507
which lock already depends on the new lock.
Instead we can simply forbit any mcast-related setsockopt
Fixes: 717e79c867ca5 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported memory leak in peak_usb.
The problem was in case of failure after calling
->dev_init()[2] in peak_usb_create_dev()[1]. The data
allocated int dev_init() wasn't freed, so simple
->dev_free() call fix this problem.
backtrace:
[<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline]
[<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline]
[<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868 [2]
[<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1]
[<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949
Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support for UDP_GRO was added in the past but the implementation for
getsockopt was missed which did lead to an error when we tried to
retrieve the setting for UDP_GRO. This patch adds the missing switch
case for UDP_GRO
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Norman Maurer <norman_maurer@apple.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported memory leak in atusb_probe()[1].
The problem was in atusb_alloc_urbs().
Since urb is anchored, we need to release the reference
to correctly free the urb
backtrace:
[<ffffffff82ba0466>] kmalloc include/linux/slab.h:559 [inline]
[<ffffffff82ba0466>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74
[<ffffffff82ad3888>] atusb_alloc_urbs drivers/net/ieee802154/atusb.c:362 [inline][2]
[<ffffffff82ad3888>] atusb_probe+0x158/0x820 drivers/net/ieee802154/atusb.c:1038 [1]
Reported-by: syzbot+28a246747e0a465127f3@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ciara Loftus says:
====================
This series fixes some issues around socket creation for AF_XDP.
Patch 1 fixes a potential NULL pointer dereference in
xsk_socket__create_shared.
Patch 2 ensures that the umem passed to xsk_socket__create(_shared)
remains unchanged in event of failure.
Patch 3 makes it possible for xsk_socket__create(_shared) to
succeed even if the rx and tx XDP rings have already been set up by
introducing a new fields to struct xsk_umem which represent the ring
setup status for the xsk which shares the fd with the umem.
v3->v4:
* Reduced nesting in xsk_put_ctx as suggested by Alexei.
* Use bools instead of a u8 and flags to represent the
ring setup status as suggested by Björn.
v2->v3:
* Instead of ignoring the return values of the setsockopt calls, introduce
a new flag to determine whether or not to call them based on the ring
setup status as suggested by Alexei.
v1->v2:
* Simplified restoring the _save pointers as suggested by Magnus.
* Fixed the condition which determines whether to unmap umem rings
when socket create fails.
====================
Acked-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Prior to this commit xsk_socket__create(_shared) always attempted to create
the rx and tx rings for the socket. However this causes an issue when the
socket being setup is that which shares the fd with the UMEM. If a
previous call to this function failed with this socket after the rings were
set up, a subsequent call would always fail because the rings are not torn
down after the first call and when we try to set them up again we encounter
an error because they already exist. Solve this by remembering whether the
rings were set up by introducing new bools to struct xsk_umem which
represent the ring setup status and using them to determine whether or
not to set up the rings.
Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-4-ciara.loftus@intel.com
|
|
If the call to xsk_socket__create fails, the user may want to retry the
socket creation using the same umem. Ensure that the umem is in the
same state on exit if the call fails by:
1. ensuring the umem _save pointers are unmodified.
2. not unmapping the set of umem rings that were set up with the umem
during xsk_umem__create, since those maps existed before the call to
xsk_socket__create and should remain in tact even in the event of
failure.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-3-ciara.loftus@intel.com
|
|
Calls to xsk_socket__create dereference the umem to access the
fill_save and comp_save pointers. Make sure the umem is non-NULL
before doing this.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210331061218.1647-2-ciara.loftus@intel.com
|
|
As for bpf_link, refuse creating a non-O_RDWR fd. Since program fds
currently don't allow modifications this is a precaution, not a
straight up bug fix.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210326160501.46234-2-lmb@cloudflare.com
|
|
Invoking BPF_OBJ_GET on a pinned bpf_link checks the path access
permissions based on file_flags, but the returned fd ignores flags.
This means that any user can acquire a "read-write" fd for a pinned
link with mode 0664 by invoking BPF_OBJ_GET with BPF_F_RDONLY in
file_flags. The fd can be used to invoke BPF_LINK_DETACH, etc.
Fix this by refusing non-O_RDWR flags in BPF_OBJ_GET. This works
because OBJ_GET by default returns a read write mapping and libbpf
doesn't expose a way to override this behaviour for programs
and links.
Fixes: 70ed506c3bbc ("bpf: Introduce pinnable bpf_link abstraction")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210326160501.46234-1-lmb@cloudflare.com
|
|
Commit 7bf168c8fe8c ("drm/msm: Fix speed-bin support not to
access outside valid memory"), reworked the nvmem reading of
"speed_bin", but in doing so dropped handling of the -ENOENT
case which was previously documented as "fine".
That change resulted in the db845c board display to fail to
start, with the following error:
adreno 5000000.gpu: [drm:a6xx_gpu_init] *ERROR* failed to read speed-bin (-2). Some OPPs may not be supported by hardware
Thus, this patch simply re-adds the ENOENT handling so the lack
of the speed_bin entry isn't fatal for display, and gets things
working on db845c.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Reported-by: YongQin Liu <yongqin.liu@linaro.org>
Fixes: 7bf168c8fe8c ("drm/msm: Fix speed-bin support not to access outside valid memory")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Message-Id: <20210330013408.2532048-1-john.stultz@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
We should set the platform device's driver data to NULL here so that
code doesn't assume the struct drm_device pointer is valid when it could
have been destroyed. The lifetime of this pointer is managed by a kref
but when msm_drm_init() fails we call drm_dev_put() on the pointer which
will free the pointer's memory. This driver uses the component model, so
there's sort of two "probes" in this file, one for the platform device
i.e. msm_pdev_probe() and one for the component i.e. msm_drm_bind(). The
msm_drm_bind() code is using the platform device's driver data to store
struct drm_device so the two functions are intertwined.
This relationship becomes a problem for msm_pdev_shutdown() when it
tests the NULL-ness of the pointer to see if it should call
drm_atomic_helper_shutdown(). The NULL test is a proxy check for if the
pointer has been freed by kref_put(). If the drm_device has been
destroyed, then we shouldn't call the shutdown helper, and we know that
is the case if msm_drm_init() failed, therefore set the driver data to
NULL so that this pointer liveness is tracked properly.
Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krishna Manikandan <mkrishn@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Message-Id: <20210325212822.3663144-1-swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Merge module sections only when using Clang LTO. With ld.bfd, merging
sections does not appear to update the symbol tables for the module,
e.g. 'readelf -s' shows the value that a symbol would have had, if
sections were not merged. ld.lld does not show this problem.
The stale symbol table breaks gdb's function disassembler, and presumably
other things, e.g.
gdb -batch -ex "file arch/x86/kvm/kvm.ko" -ex "disassemble kvm_init"
reads the wrong bytes and dumps garbage.
Fixes: dd2776222abb ("kbuild: lto: merge module sections")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210322234438.502582-1-seanjc@google.com
|
|
On x86 the struct pt_regs * grabbed by task_pt_regs() points to an
offset of task->stack. The pt_regs are later dereferenced in
__bpf_get_stack (e.g. by user_mode() check). This can cause a fault if
the task in question exits while bpf_get_task_stack is executing, as
warned by task_stack_page's comment:
* When accessing the stack of a non-current task that might exit, use
* try_get_task_stack() instead. task_stack_page will return a pointer
* that could get freed out from under you.
Taking the comment's advice and using try_get_task_stack() and
put_task_stack() to hold task->stack refcount, or bail early if it's
already 0. Incrementing stack_refcount will ensure the task's stack
sticks around while we're using its data.
I noticed this bug while testing a bpf task iter similar to
bpf_iter_task_stack in selftests, except mine grabbed user stack, and
getting intermittent crashes, which resulted in dumps like:
BUG: unable to handle page fault for address: 0000000000003fe0
\#PF: supervisor read access in kernel mode
\#PF: error_code(0x0000) - not-present page
RIP: 0010:__bpf_get_stack+0xd0/0x230
<snip...>
Call Trace:
bpf_prog_0a2be35c092cb190_get_task_stacks+0x5d/0x3ec
bpf_iter_run_prog+0x24/0x81
__task_seq_show+0x58/0x80
bpf_seq_read+0xf7/0x3d0
vfs_read+0x91/0x140
ksys_read+0x59/0xd0
do_syscall_64+0x48/0x120
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210401000747.3648767-1-davemarchevsky@fb.com
|
|
Pull kvm fixes from Paolo Bonzini:
"It's a bit larger than I (and probably you) would like by the time we
get to -rc6, but perhaps not entirely unexpected since the changes in
the last merge window were larger than usual.
x86:
- Fixes for missing TLB flushes with TDP MMU
- Fixes for race conditions in nested SVM
- Fixes for lockdep splat with Xen emulation
- Fix for kvmclock underflow
- Fix srcdir != builddir builds
- Other small cleanups
ARM:
- Fix GICv3 MMIO compatibility probing
- Prevent guests from using the ARMv8.4 self-hosted tracing
extension"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Check that TSC page value is small after KVM_SET_CLOCK(0)
KVM: x86: Prevent 'hv_clock->system_time' from going negative in kvm_guest_time_update()
KVM: x86: disable interrupts while pvclock_gtod_sync_lock is taken
KVM: x86: reduce pvclock_gtod_sync_lock critical sections
KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
KVM: SVM: load control fields from VMCB12 before checking them
KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap
KVM: make: Fix out-of-source module builds
selftests: kvm: make hardware_disable_test less verbose
KVM: x86/vPMU: Forbid writing to MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
KVM: x86: remove unused declaration of kvm_write_tsc()
KVM: clean up the unused argument
tools/kvm_stat: Add restart delay
KVM: arm64: Fix CPU interface MMIO compatibility detection
KVM: arm64: Disable guest access to trace filter controls
KVM: arm64: Hide system instruction access to Trace registers
|
|
Pull drm fixes from Dave Airlie:
"Things have settled down in time for Easter, a random smattering of
small fixes across a few drivers.
I'm guessing though there might be some i915 and misc fixes out there
I haven't gotten yet, but since today is a public holiday here, I'm
sending this early so I can have the day off, I'll see if more
requests come in and decide what to do with them later.
amdgpu:
- Polaris idle power fix
- VM fix
- Vangogh S3 fix
- Fixes for non-4K page sizes
amdkfd:
- dqm fence memory corruption fix
tegra:
- lockdep warning fix
- runtine PM reference fix
- display controller fix
- PLL Fix
imx:
- memory leak in error path fix
- LDB driver channel registration fix
- oob array warning in LDB driver
exynos
- unused header file removal"
* tag 'drm-fixes-2021-04-02' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: check alignment on CPU page for bo map
drm/amdgpu: Set a suitable dev_info.gart_page_size
drm/amdgpu/vangogh: don't check for dpm in is_dpm_running when in suspend
drm/amdkfd: dqm fence memory corruption
drm/tegra: sor: Grab runtime PM reference across reset
drm/tegra: dc: Restore coupling of display controllers
gpu: host1x: Use different lock classes for each client
drm/tegra: dc: Don't set PLL clock to 0Hz
drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()
drm/amd/pm: no need to force MCLK to highest when no display connected
drm/exynos/decon5433: Remove the unused include statements
drm/imx: imx-ldb: fix out of bounds array access warning
drm/imx: imx-ldb: Register LDB channel1 when it is the only channel to be used
drm/imx: fix memory leak when fails to init
|
|
git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: imx-drm-core and imx-ldb fixes
Fix a memory leak in an error path during DRM device initialization,
fix the LDB driver to register channel 1 even if channel 0 is unused,
and fix an out of bounds array access warning in the LDB driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401092235.GA13586@pengutronix.de
|
|
ssh://git.freedesktop.org/git/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.12-rc6
This contains a couple of fixes for various issues such as lockdep
warnings, runtime PM references, coupled display controllers and
misconfigured PLLs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401163352.3348296-1-thierry.reding@gmail.com
|
|
KASAN detected the following BUG:
BUG: KASAN: use-after-free in rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
Read of size 8 at addr ffff88bf2fb4adc0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.4.84-pserver #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10
Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00 09/04/2012
Call Trace:
<IRQ>
dump_stack+0x96/0xe0
print_address_description.constprop.4+0x1f/0x300
? irq_work_claim+0x2e/0x50
__kasan_report.cold.8+0x78/0x92
? rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
kasan_report+0x10/0x20
rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
rtrs_clt_rdma_done+0xb1/0x760 [rtrs_client]
? lockdep_hardirqs_on+0x1a8/0x290
? process_io_rsp+0xb0/0xb0 [rtrs_client]
? mlx4_ib_destroy_cq+0x100/0x100 [mlx4_ib]
? add_interrupt_randomness+0x1a2/0x340
__ib_process_cq+0x97/0x100 [ib_core]
ib_poll_handler+0x41/0xb0 [ib_core]
irq_poll_softirq+0xe0/0x260
__do_softirq+0x127/0x672
irq_exit+0xd1/0xe0
do_IRQ+0xa3/0x1d0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0010:cpuidle_enter_state+0xea/0x780
Code: 31 ff e8 99 48 47 ff 80 7c 24 08 00 74 12 9c 58 f6 c4 02 0f 85 53 05 00 00 31 ff e8 b0 6f 53 ff e8 ab 4f 5e ff fb 8b 44 24 04 <85> c0 0f 89 f3 01 00 00 48 8d 7b 14 e8 65 1e 77 ff c7 43 14 00 00
RSP: 0018:ffffffffab007d58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffca
RAX: 0000000000000002 RBX: ffff88b803d69800 RCX: ffffffffa91a8298
RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffffffffab021414
RBP: ffffffffab6329e0 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
R13: 000000bf39d82466 R14: ffffffffab632aa0 R15: ffffffffab632ae0
? lockdep_hardirqs_on+0x1a8/0x290
? cpuidle_enter_state+0xe5/0x780
cpuidle_enter+0x3c/0x60
do_idle+0x2fb/0x390
? arch_cpu_idle_exit+0x40/0x40
? schedule+0x94/0x120
cpu_startup_entry+0x19/0x1b
start_kernel+0x5da/0x61b
? thread_stack_cache_init+0x6/0x6
? load_ucode_amd_bsp+0x6f/0xc4
? init_amd_microcode+0xa6/0xa6
? x86_family+0x5/0x20
? load_ucode_bsp+0x182/0x1fd
secondary_startup_64+0xa4/0xb0
Allocated by task 5730:
save_stack+0x19/0x80
__kasan_kmalloc.constprop.9+0xc1/0xd0
kmem_cache_alloc_trace+0x15b/0x350
alloc_sess+0xf4/0x570 [rtrs_client]
rtrs_clt_open+0x3b4/0x780 [rtrs_client]
find_and_get_or_create_sess+0x649/0x9d0 [rnbd_client]
rnbd_clt_map_device+0xd7/0xf50 [rnbd_client]
rnbd_clt_map_device_store+0x4ee/0x970 [rnbd_client]
kernfs_fop_write+0x141/0x240
vfs_write+0xf3/0x280
ksys_write+0xba/0x150
do_syscall_64+0x68/0x270
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 5822:
save_stack+0x19/0x80
__kasan_slab_free+0x125/0x170
kfree+0xe7/0x3f0
kobject_put+0xd3/0x240
rtrs_clt_destroy_sess_files+0x3f/0x60 [rtrs_client]
rtrs_clt_close+0x3c/0x80 [rtrs_client]
close_rtrs+0x45/0x80 [rnbd_client]
rnbd_client_exit+0x10f/0x2bd [rnbd_client]
__x64_sys_delete_module+0x27b/0x340
do_syscall_64+0x68/0x270
entry_SYSCALL_64_after_hwframe+0x49/0xbe
When rtrs_clt_close is triggered, it iterates over all the present
rtrs_clt_sess and triggers close on them. However, the call to
rtrs_clt_destroy_sess_files is done before the rtrs_clt_close_conns. This
is incorrect since during the initialization phase we allocate
rtrs_clt_sess first, and then we go ahead and create rtrs_clt_con for it.
If we free the rtrs_clt_sess structure before closing the rtrs_clt_con, it
may so happen that an inflight IO completion would trigger the function
rtrs_clt_rdma_done, which would lead to the above UAF case.
Hence close the rtrs_clt_con connections first, and then trigger the
destruction of session files.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210325153308.1214057-12-gi-oh.kim@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Commit cbc3b92ce037 fixed an issue to modify the macros of the stack trace
event so that user space could parse it properly. Originally the stack
trace format to user space showed that the called stack was a dynamic
array. But it is not actually a dynamic array, in the way that other
dynamic event arrays worked, and this broke user space parsing for it. The
update was to make the array look to have 8 entries in it. Helper
functions were added to make it parse it correctly, as the stack was
dynamic, but was determined by the size of the event stored.
Although this fixed user space on how it read the event, it changed the
internal structure used for the stack trace event. It changed the array
size from [0] to [8] (added 8 entries). This increased the size of the
stack trace event by 8 words. The size reserved on the ring buffer was the
size of the stack trace event plus the number of stack entries found in
the stack trace. That commit caused the amount to be 8 more than what was
needed because it did not expect the caller field to have any size. This
produced 8 entries of garbage (and reading random data) from the stack
trace event:
<idle>-0 [002] d... 1976396.837549: <stack trace>
=> trace_event_raw_event_sched_switch
=> __traceiter_sched_switch
=> __schedule
=> schedule_idle
=> do_idle
=> cpu_startup_entry
=> secondary_startup_64_no_verify
=> 0xc8c5e150ffff93de
=> 0xffff93de
=> 0
=> 0
=> 0xc8c5e17800000000
=> 0x1f30affff93de
=> 0x00000004
=> 0x200000000
Instead, subtract the size of the caller field from the size of the event
to make sure that only the amount needed to store the stack trace is
reserved.
Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/
Cc: stable@vger.kernel.org
Fixes: cbc3b92ce037 ("tracing: Set kernel_stack's caller size properly")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things seem calming down, only usual device-specific fixes for
HD-audio and USB-audio at this time"
* tag 'sound-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs for HP 640 G8
ALSA: hda: Add missing sanity checks in PM prepare/complete callbacks
ALSA: hda: Re-add dropped snd_poewr_change_state() calls
ALSA: usb-audio: Apply sample rate quirk to Logitech Connect
ALSA: hda/realtek: call alc_update_headset_mode() in hp_automute_hook
ALSA: hda/realtek: fix a determine_headset_type issue for a Dell AIO
|
|
Pull tomory fix from Tetsuo Handa:
"An update on 'tomoyo: recognize kernel threads correctly' from Jens
Axboe to not special case PF_IO_WORKER for PF_KTHREAD"
* tag 'tomoyo-pr-20210401' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
tomoyo: don't special case PF_IO_WORKER for PF_KTHREAD
|
|
Pull XArray fixes from Matthew Wilcox:
"My apologies for the lateness of this. I had a bug reported in the
test suite, and when I started working on it, I realised I had two
fixes sitting in the xarray tree since last November. Anyway,
everything here is fixes, apart from adding xa_limit_16b. The test
suite passes.
Summary:
- Fix a bug when splitting to a non-zero order
- Documentation fix
- Add a predefined 16-bit allocation limit
- Various test suite fixes"
* tag 'xarray-5.12' of git://git.infradead.org/users/willy/xarray:
idr test suite: Improve reporting from idr_find_test_1
idr test suite: Create anchor before launching throbber
idr test suite: Take RCU read lock in idr_find_test_1
radix tree test suite: Register the main thread with the RCU library
radix tree test suite: Fix compilation
XArray: Add xa_limit_16b
XArray: Fix splitting to non-zero orders
XArray: Fix split documentation
|
|
If veb-stats was enabled, the ethtool stats triggered a warning
due to invalid size: 'unexpected stat size for veb.tc_%u_tx_packets'.
This was due to an incorrect structure definition for the statistics.
Structures and functions have been improved in line with requirements
for the presentation of statistics, in particular for the functions:
'i40e_add_ethtool_stats' and 'i40e_add_stat_strings'.
Fixes: 1510ae0be2a4 ("i40e: convert VEB TC stats to use an i40e_stats array")
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix so that single packets are received immediately instead of in
batches of 8. If you sent 1 pps to a system, you received 8 packets
every 8 seconds instead of 1 packet every second. The problem behind
this was that the work_done reporting from the Tx part of the driver
was broken. The work_done reporting in i40e controls not only the
reporting back to the napi logic but also the setting of the interrupt
throttling logic. When Tx or Rx reports that it has more to do,
interrupts are throttled or coalesced and when they both report that
they are done, interrupts are armed right away. If the wrong work_done
value is returned, the logic will start to throttle interrupts in a
situation where it should have just enabled them. This leads to the
undesired batching behavior seen in user-space.
Fix this by returning the correct boolean value from the Tx xsk
zero-copy path. Return true if there is nothing to do or if we got
fewer packets to process than we asked for. Return false if we got as
many packets as the budget since there might be more packets we can
process.
Fixes: 3106c580fb7c ("i40e: Use batched xsk Tx interfaces to increase performance")
Reported-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixed new static analysis findings:
"warn: inconsistent indenting" - introduced lately,
reported with lkp and smatch build.
Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
iov_iter_revert() is done in completion handlers that happensf before
read/write returns -EIOCBQUEUED, no need to repeat reverting afterwards.
Moreover, even though it may appear being just a no-op, it's actually
races with 1) user forging a new iovec of a different size 2) reissue,
that is done via io-wq continues completely asynchronously.
Fixes: 3e6a0d3c7571c ("io_uring: fix -EAGAIN retry with IOPOLL")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
task_pid may be large enough to not fit into the left space of
TASK_COMM_LEN-sized buffers and overflow in sprintf. We not so care
about uniqueness, so replace it with safer snprintf().
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1702c6145d7e1c46fbc382f28334c02e1a3d3994.1617267273.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
S_ISBLK is marked as unbounded work for async preparation, because it
doesn't match S_ISREG. That is incorrect, as any read/write to a block
device is also a bounded operation. Fix it up and ensure that S_ISBLK
isn't marked unbounded.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Clang warns about the comparison when using a 32-bit phys_addr_t:
drivers/bus/mvebu-mbus.c:621:17: error: result of comparison of constant 4294967296 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (reg_start >= 0x100000000ULL)
Add a cast to shut up the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210323131952.2835509-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The default initializer at the start of the array causes a warning
when building with W=1:
In file included from arch/arm/mach-pxa/mainstone.c:47:
arch/arm/mach-pxa/mainstone.h:124:33: error: initialized field overwritten [-Werror=override-init]
124 | #define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x))
| ^
arch/arm/mach-pxa/mainstone.h:133:33: note: in expansion of macro 'MAINSTONE_IRQ'
133 | #define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
| ^~~~~~~~~~~~~
arch/arm/mach-pxa/mainstone.c:506:15: note: in expansion of macro 'MAINSTONE_S0_CD_IRQ'
506 | [5] = MAINSTONE_S0_CD_IRQ,
| ^~~~~~~~~~~~~~~~~~~
Rework the initializer to list each element explicitly and only once.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323130849.2362001-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The clang integrated assembler fails to build one file with
a complex asm instruction:
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: error: invalid instruction, any one of the following would fix this:
mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: armv6t2
mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: thumb2
mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
^
The problem is that 'NR_IRQS_LEGACY' is not defined here. Apparently
gas does not care because we first add and then subtract this number,
leading to the immediate value to be the same regardless of the
specific definition of NR_IRQS_LEGACY.
Neither the way that 'gas' just silently builds this file, nor the
way that clang IAS makes nonsensical suggestions for how to fix it
is great. Fortunately there is an easy fix, which is to #include
the header that contains the definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210308153430.2530616-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When building with W=1, gcc points out that the __packed attribute
on struct qm_eqcr_entry conflicts with the 8-byte alignment
attribute on struct qm_fd inside it:
drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned]
I assume that the alignment attribute is the correct one, and
that qm_eqcr_entry cannot actually be unaligned in memory,
so add the same alignment on the outer struct.
Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
clang warns about an impossible condition when building with 32-bit
phys_addr_t:
arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
mem_end > KEYSTONE_HIGH_PHYS_END) {
~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
if (mem_start < KEYSTONE_HIGH_PHYS_START ||
~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~
Change the temporary variable to a fixed-size u64 to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20210323131814.2751750-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit bce74491c300 ("powerpc/vdso: fix unnecessary rebuilds of
vgettimeofday.o") moved vdso32_wrapper.o and vdso64_wrapper.o out
of arch/powerpc/kernel/vdso[32/64]/ and removed the dependencies in
the Makefile. This leads to the wrappers not being re-build hence the
kernel embedding the old vdso library.
Add back missing dependencies to ensure vdso32_wrapper.o and vdso64_wrapper.o
are rebuilt when vdso32.so.dbg and vdso64.so.dbg are changed.
Fixes: bce74491c300 ("powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8bb015bc98c51d8ced581415b7e3d157e18da7c9.1617181918.git.christophe.leroy@csgroup.eu
|
|
PPC32 encounters a KUAP fault when trying to handle a signal with
VDSO unmapped.
Kernel attempted to read user page (7fc07ec0) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel data access on read at 0x7fc07ec0
Faulting instruction address: 0xc00111d4
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=16K PREEMPT CMPC885
CPU: 0 PID: 353 Comm: sigreturn_vdso Not tainted 5.12.0-rc4-s3k-dev-01553-gb30c310ea220 #4814
NIP: c00111d4 LR: c0005a28 CTR: 00000000
REGS: cadb3dd0 TRAP: 0300 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48000884 XER: 20000000
DAR: 7fc07ec0 DSISR: 88000000
GPR00: c0007788 cadb3e90 c28d4a40 7fc07ec0 7fc07ed0 000004e0 7fc07ce0 00000000
GPR08: 00000001 00000001 7fc07ec0 00000000 28000282 1001b828 100a0920 00000000
GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e
GPR24: ffffffff 105c43c8 00000000 7fc07ec8 cadb3f40 cadb3ec8 c28d4a40 00000000
NIP [c00111d4] flush_icache_range+0x90/0xb4
LR [c0005a28] handle_signal32+0x1bc/0x1c4
Call Trace:
[cadb3e90] [100d0000] 0x100d0000 (unreliable)
[cadb3ec0] [c0007788] do_notify_resume+0x260/0x314
[cadb3f20] [c000c764] syscall_exit_prepare+0x120/0x184
[cadb3f30] [c00100b4] ret_from_syscall+0xc/0x28
--- interrupt: c00 at 0xfe807f8
NIP: 0fe807f8 LR: 10001060 CTR: c0139378
REGS: cadb3f40 TRAP: 0c00 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 28000482 XER: 20000000
GPR00: 00000025 7fc081c0 77bb1690 00000000 0000000a 28000482 00000001 0ff03a38
GPR08: 0000d032 00006de5 c28d4a40 00000009 88000482 1001b828 100a0920 00000000
GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e
GPR24: ffffffff 105c43c8 00000000 77ba7628 10002398 10010000 10002124 00024000
NIP [0fe807f8] 0xfe807f8
LR [10001060] 0x10001060
--- interrupt: c00
Instruction dump:
38630010 7c001fac 38630010 4200fff0 7c0004ac 4c00012c 4e800020 7c001fac
2c0a0000 38630010 4082ffcc 4bffffe4 <7c00186c> 2c070000 39430010 4082ff8c
---[ end trace 3973fb72b049cb06 ]---
This is because flush_icache_range() is called on user addresses.
The same problem was detected some time ago on PPC64. It was fixed by
enabling KUAP in commit 59bee45b9712 ("powerpc/mm: Fix missing KUAP
disable in flush_coherent_icache()").
PPC32 doesn't use flush_coherent_icache() and fallbacks on
clean_dcache_range() and invalidate_icache_range().
We could fix it similarly by enabling user access in those functions,
but this is overkill for just flushing two instructions.
The two instructions are 8 bytes aligned, so a single dcbst/icbi is
enough to flush them. Do like __patch_instruction() and inline
a dcbst followed by an icbi just after the write of the instructions,
while user access is still allowed. The isync is not required because
rfi will be used to return to user.
icbi() is handled as a read so read-write user access is needed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bde9154e5351a5ac7bca3d59cdb5a5e8edacbb79.1617199569.git.christophe.leroy@csgroup.eu
|
|
CONFIG_PPC_FPU_REGS
An #ifdef CONFIG_PPC_FPU_REGS is missing in arch_ptrace() leading
to the following Oops because [REGSET_FPR] entry is not initialised in
native_regsets[].
[ 41.917608] BUG: Unable to handle kernel instruction fetch
[ 41.922849] Faulting instruction address: 0xff8fd228
[ 41.927760] Oops: Kernel access of bad area, sig: 11 [#1]
[ 41.933089] BE PAGE_SIZE=4K PREEMPT CMPC885
[ 41.940753] Modules linked in:
[ 41.943768] CPU: 0 PID: 366 Comm: gdb Not tainted 5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty #4835
[ 41.952800] NIP: ff8fd228 LR: c004d9e0 CTR: ff8fd228
[ 41.957790] REGS: caae9df0 TRAP: 0400 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 41.966741] MSR: 40009032 <EE,ME,IR,DR,RI> CR: 82004248 XER: 20000000
[ 41.973540]
[ 41.973540] GPR00: c004d9b4 caae9eb0 c1b64f60 c1b64520 c0713cd4 caae9eb8 c1bacdfc 00000004
[ 41.973540] GPR08: 00000200 ff8fd228 c1bac700 00001032 28004242 1061aaf4 00000001 106d64a0
[ 41.973540] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 41.973540] GPR24: 7fa0a580 7fa0a570 c1bacc00 c1b64520 c1bacc00 caae9ee8 00000108 c0713cd4
[ 42.009685] NIP [ff8fd228] 0xff8fd228
[ 42.013300] LR [c004d9e0] __regset_get+0x100/0x124
[ 42.018036] Call Trace:
[ 42.020443] [caae9eb0] [c004d9b4] __regset_get+0xd4/0x124 (unreliable)
[ 42.026899] [caae9ee0] [c004da94] copy_regset_to_user+0x5c/0xb0
[ 42.032751] [caae9f10] [c002f640] sys_ptrace+0xe4/0x588
[ 42.037915] [caae9f30] [c0011010] ret_from_syscall+0x0/0x28
[ 42.043422] --- interrupt: c00 at 0xfd1f8e4
[ 42.047553] NIP: 0fd1f8e4 LR: 1004a688 CTR: 00000000
[ 42.052544] REGS: caae9f40 TRAP: 0c00 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 42.061494] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 48004442 XER: 00000000
[ 42.068551]
[ 42.068551] GPR00: 0000001a 7fa0a040 77dad7e0 0000000e 00000170 00000000 7fa0a078 00000004
[ 42.068551] GPR08: 00000000 108deb88 108dda40 106d6010 44004442 1061aaf4 00000001 106d64a0
[ 42.068551] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 42.068551] GPR24: 7fa0a580 7fa0a570 1078fe00 1078fd70 1078fd70 00000170 0fdd3244 0000000d
[ 42.104696] NIP [0fd1f8e4] 0xfd1f8e4
[ 42.108225] LR [1004a688] 0x1004a688
[ 42.111753] --- interrupt: c00
[ 42.114768] Instruction dump:
[ 42.117698] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.125443] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.133195] ---[ end trace d35616f22ab2100c ]---
Adding the missing #ifdef is not good because gdb doesn't like getting
an error when getting registers.
Instead, make ptrace return 0s when CONFIG_PPC_FPU_REGS is not set.
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9121a44a2d50ba1af18d8aa5ada06c9a3bea8afd.1617200085.git.christophe.leroy@csgroup.eu
|
|
Memory backed or zoned null block devices may generate actual request
timeout errors due to the submission path being blocked on memory
allocation or zone locking. Unlike fake timeouts or injected timeouts,
the request submission path will call blk_mq_complete_request() or
blk_mq_end_request() for these real timeout errors, causing a double
completion and use after free situation as the block layer timeout
handler executes blk_mq_rq_timed_out() and __blk_mq_free_request() in
blk_mq_check_expired(). This problem often triggers a NULL pointer
dereference such as:
BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:blk_mq_sched_mark_restart_hctx+0x5/0x20
...
Call Trace:
dd_finish_request+0x56/0x80
blk_mq_free_request+0x37/0x130
null_handle_cmd+0xbf/0x250 [null_blk]
? null_queue_rq+0x67/0xd0 [null_blk]
blk_mq_dispatch_rq_list+0x122/0x850
__blk_mq_do_dispatch_sched+0xbb/0x2c0
__blk_mq_sched_dispatch_requests+0x13d/0x190
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x49/0x90
process_one_work+0x26c/0x580
worker_thread+0x55/0x3c0
? process_one_work+0x580/0x580
kthread+0x134/0x150
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x1f/0x30
This problem very often triggers when running the full btrfs xfstests
on a memory-backed zoned null block device in a VM with limited amount
of memory.
Avoid this by executing blk_mq_complete_request() in null_timeout_rq()
only for commands that are marked for a fake timeout completion using
the fake_timeout boolean in struct null_cmd. For timeout errors injected
through debugfs, the timeout handler will execute
blk_mq_complete_request()i as before. This is safe as the submission
path does not execute complete requests in this case.
In null_timeout_rq(), also make sure to set the command error field to
BLK_STS_TIMEOUT and to propagate this error through to the request
completion.
Reported-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210331225244.126426-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of just reporting an assertion failure, report enough information
that we can start diagnosing exactly went wrong.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
The throbber could race with creation of the anchor entry and cause the
IDR to have zero entries in it, which would cause the test to fail.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
When run on a single CPU, this test would frequently access already-freed
memory. Due to timing, this bug never showed up on multi-CPU tests.
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
