summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-23ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI linksStephan Gerhold
apq8016_sbc_parse_of() sets up multiple DAI links, depending on the number of nodes in the device tree. However, at the moment CPU and platform components are only allocated for the first link. This causes an oops when more than one link is defined: Internal error: Oops: 96000044 [#1] SMP CPU: 0 PID: 1015 Comm: kworker/0:2 Not tainted 5.3.0-rc1 #4 Call trace: apq8016_sbc_platform_probe+0x1a8/0x3f0 platform_drv_probe+0x50/0xa0 ... Move the allocation inside the loop to ensure that each link is properly initialized. Fixes: 98b232ca9e0e ("ASoC: qcom: apq8016_sbc: use modern dai_link style") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20190722130352.95874-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: madera: Read device tree configurationCharles Keepax
Read the configuration of the Madera ASoC driver from device tree. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190722135209.30302-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: dapm: fix a memory leak bugWenwen Wang
In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in dapm_cnew_widget() to hold the new dapm widget. Then, different actions are taken according to the id of the widget, i.e., 'w->id'. If any failure occurs during this process, snd_soc_dapm_new_control_unlocked() should be terminated by going to the 'request_failed' label. However, the allocated kernel buffer is not freed on this code path, leading to a memory leak bug. To fix the above issue, free the buffer before returning from snd_soc_dapm_new_control_unlocked() through the 'request_failed' label. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Link: https://lore.kernel.org/r/1563803864-2809-1-git-send-email-wang6495@umn.edu Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: sgtl5000: Fix charge pump source assignmentOleksandr Suvorov
If VDDA != VDDIO and any of them is greater than 3.1V, charge pump source can be assigned automatically [1]. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20190719100524.23300-7-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: sgtl5000: Fix of unmute outputs on probeOleksandr Suvorov
To enable "zero cross detect" for ADC/HP, change HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole CHIP_ANA_CTRL register. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20190719100524.23300-6-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: sgtl5000: add ADC mute controlOleksandr Suvorov
This control mute/unmute the ADC input of SGTL5000 using its CHIP_ANA_CTRL register. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20190719100524.23300-5-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: sgtl5000: Fix definition of VAG Ramp ControlOleksandr Suvorov
SGTL5000_SMALL_POP is a bit mask, not a value. Usage of correct definition makes device probing code more clear. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20190719100524.23300-4-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: sgtl5000: Improve VAG power and mute controlOleksandr Suvorov
VAG power control is improved to fit the manual [1]. This patch fixes as minimum one bug: if customer muxes Headphone to Line-In right after boot, the VAG power remains off that leads to poor sound quality from line-in. I.e. after boot: - Connect sound source to Line-In jack; - Connect headphone to HP jack; - Run following commands: $ amixer set 'Headphone' 80% $ amixer set 'Headphone Mux' LINE_IN Change VAG power on/off control according to the following algorithm: - turn VAG power ON on the 1st incoming event. - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In). - turn VAG power OFF when there is the latest consumer's pre-down event come. - always delay after VAG power OFF to avoid pop. - delay after VAG power ON if the initiative consumer is Line-In, this prevents pop during line-in muxing. According to the data sheet [1], to avoid any pops/clicks, the outputs should be muted during input/output routing changes. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf Cc: stable@vger.kernel.org Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: Define a set of DAPM pre/post-up eventsOleksandr Suvorov
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to reduce coming code size and make it more readable. Cc: stable@vger.kernel.org Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20190719100524.23300-2-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: rockchip-max98090: Remove MICBIAS as supply of input pin IN34Enric Balletbo i Serra
Commit ec0d23b295b9 ("ASoC: rockchip-max98090: Fix the Headset Mic route.") moved the MICBIAS widget to supply Headset Mic but forget to remove the MICBIAS widget to supply IN34 which is not really needed, so remove that path so we have: IN34 <==== Headset MIC <==== MICBIAS Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20190719180558.11459-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: cs47l35: Use define for DSPCLK enable bitCharles Keepax
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190722093516.12906-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: rt1308: add silence detection and manual PDB controlShuming Fan
We enable the silence detection function in initial settings. PDB control changes to manual mode, hence the driver could fully control the AMP output on/off. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190719063249.18806-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: rt1308: simplify the EFUSE read functionShuming Fan
The rt1308_efuse function contains many redundant settings. We remove the redundant settings and the function still works. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190719063235.18757-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: tlv320aic31xx: suppress error message for EPROBE_DEFERLucas Stach
Both the supplies and reset GPIO might need a probe deferral for the resource to be available. Don't print a error message in that case, as it is a normal operating condition. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Andrew F. Davis <afd@ti.com> Link: https://lore.kernel.org/r/20190719143637.2018-1-l.stach@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: max98383: fix i2c probe failurefengchunguo
Added reset_gpio configuration for i2c probe successfully. If not,i2c address can't be found rightly. Error information: max98373 3-0031: Failed to read: 0x21FF Fixed: [3.761299@3] max98373 3-0031: MAX98373 revisionID: 0x43 [3.828911@3] asoc-aml-card auge_sound: max98373-aif1 <-> TDM-B mapping ok Signed-off-by: fengchunguo <chunguo.feng@amlogic.com> Link: https://lore.kernel.org/r/20190715095556.1614-1-chunguo.feng@amlogic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: fsl_sai: mark regmap as fast_ioLucas Stach
The regmap is only ever used to access MMIO registers, so it's fair to say that register access is fast. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20190717105156.15721-1-l.stach@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: fsl_sai: derive TX FIFO watermark from FIFO depthLucas Stach
The DMA request schould be triggered as soon as the FIFO has space for another burst. As different versions of the SAI block have different FIFO sizes, the watrmark level needs to be derived from version specific data. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Angus Ainslie <angus@akkea.ca> Reviewed-by: Angus Ainslie <angus@akkea.ca> Link: https://lore.kernel.org/r/20190717105635.18514-3-l.stach@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: fsl_sai: add of_match dataLucas Stach
New revisions of the SAI IP block have even more differences that need be taken into account by the driver. To avoid sprinking compatible checks all over the driver move the current differences into of_match_data. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Angus Ainslie <angus@akkea.ca> Reviewed-by: Angus Ainslie <angus@akkea.ca> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20190717105635.18514-2-l.stach@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: mediatek: mt8183: make headset codec optionalTzung-Bi Shih
Make headset codec optional because some variant machines may not have an audio jack. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20190716032417.19015-1-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: wcd9335: add irqflag IRQF_ONESHOT flagHariprasad Kelam
Add IRQF_ONESHOT to ensure "Interrupt is not reenabled after the hardirq handler finished". fixes below issue reported by coccicheck sound/soc/codecs/wcd9335.c:4068:8-33: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Link: https://lore.kernel.org/r/20190710021627.GA13396@hari-Inspiron-1545 Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: bcm: cygnus-pcm: Unneeded variable: "ret".Hariprasad Kelam
This patch fixes below issues reported by coccicheck sound/soc/bcm/cygnus-pcm.c:642:5-8: Unneeded variable: "ret". Return "0" on line 650 sound/soc/bcm/cygnus-pcm.c:671:5-8: Unneeded variable: "ret". Return "0" on line 696 We cannot change return type of these functions as they are callback functions of snd_pcm_ops Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Link: https://lore.kernel.org/r/20190709184236.GA7873@hari-Inspiron-1545 Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22sound: soc: codecs: mt6358: change return type of mt6358_codec_init_regHariprasad Kelam
As mt6358_codec_init_reg function always returns 0 , change return type from int to void. fixes below issue reported by coccicheck sound/soc/codecs/mt6358.c:2260:5-8: Unneeded variable: "ret". Return "0" on line 2289 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Acked-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20190709182543.GA6611@hari-Inspiron-1545 Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: fsl_esai: Wrap some operations to be functionsShengjiu Wang
Extract the operation to be functions, to improve the readability. In this patch, fsl_esai_hw_init, fsl_esai_register_restore, fsl_esai_trigger_start and fsl_esai_trigger_stop are extracted. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/804d7e75ae7e06a913479912b578b3538ca7cd3f.1562842206.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: rt5677: remove superfluous setCurtis Malainey
We define this variable with the same value, no need to set it twice Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20190711002838.35363-1-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: codecs: ad193x: Use regmap_multi_reg_write() when initializingCodrin Ciubotariu
Using regmap_multi_reg_write() when we set the default values for our registers makes the code smaller and easier to read. Suggested-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20190710105119.22987-1-codrin.ciubotariu@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: wcd9335: Fix misuse of GENMASK macroJoe Perches
Arguments are supposed to be ordered high then low. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/92e31a9f321fe731d428ec3ec9d4654ea8a16d1b.1562734889.git.joe@perches.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: SOF: Intel: hda: Make hdac_device device-managedRanjani Sridharan
snd_hdac_ext_bus_device_exit() has been recently modified to no longer free the hdac device. SOF allocates memory for hdac_device and hda_hda_priv with kzalloc. Make them device-managed instead so that they will be freed when the SOF driver is unloaded. Because of the above change, hda_codec is device-managed and it will be freed when the ASoC device is removed. Freeing the codec in snd_hda_codec_dev_release() leads to kernel panic while unloading and reloading the ASoC driver. So, avoid freeing the hda_codec for ASoC driver. This is done in the same patch to avoid bisect failure. Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190626070450.7229-1-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: SOF: use __u32 instead of uint32_t in uapi headersMasahiro Yamada
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to make sure they can be included from user-space. Currently, header.h and fw.h are excluded from the test coverage. To make them join the compile-test, we need to fix the build errors attached below. For a case like this, we decided to use __u{8,16,32,64} variable types in this discussion: https://lkml.org/lkml/2019/6/5/18 Build log: CC usr/include/sound/sof/header.h.s CC usr/include/sound/sof/fw.h.s In file included from <command-line>:32:0: ./usr/include/sound/sof/header.h:19:2: error: unknown type name ‘uint32_t’ uint32_t magic; /**< 'S', 'O', 'F', '\0' */ ^~~~~~~~ ./usr/include/sound/sof/header.h:20:2: error: unknown type name ‘uint32_t’ uint32_t type; /**< component specific type */ ^~~~~~~~ ./usr/include/sound/sof/header.h:21:2: error: unknown type name ‘uint32_t’ uint32_t size; /**< size in bytes of data excl. this struct */ ^~~~~~~~ ./usr/include/sound/sof/header.h:22:2: error: unknown type name ‘uint32_t’ uint32_t abi; /**< SOF ABI version */ ^~~~~~~~ ./usr/include/sound/sof/header.h:23:2: error: unknown type name ‘uint32_t’ uint32_t reserved[4]; /**< reserved for future use */ ^~~~~~~~ ./usr/include/sound/sof/header.h:24:2: error: unknown type name ‘uint32_t’ uint32_t data[0]; /**< Component data - opaque to core */ ^~~~~~~~ In file included from <command-line>:32:0: ./usr/include/sound/sof/fw.h:49:2: error: unknown type name ‘uint32_t’ uint32_t size; /* bytes minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:50:2: error: unknown type name ‘uint32_t’ uint32_t offset; /* offset from base */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:64:2: error: unknown type name ‘uint32_t’ uint32_t size; /* bytes minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:65:2: error: unknown type name ‘uint32_t’ uint32_t num_blocks; /* number of blocks */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:73:2: error: unknown type name ‘uint32_t’ uint32_t file_size; /* size of file minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:74:2: error: unknown type name ‘uint32_t’ uint32_t num_modules; /* number of modules */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:75:2: error: unknown type name ‘uint32_t’ uint32_t abi; /* version of header format */ ^~~~~~~~ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lore.kernel.org/r/20190721142308.30306-1-yamada.masahiro@socionext.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22SoC: rockchip: rockchip_max98090: Enable MICBIAS for headset keypress detectionEnric Balletbo i Serra
The TS3A227E says that the headset keypress detection needs the MICBIAS power in order to report the key events to ensure proper operation The headset keypress detection needs the MICBIAS power in order to report the key events all the time as long as MIC is present. So MICBIAS pin is forced on when a MICROPHONE is detected. On Veyron Minnie I observed that if the MICBIAS power is not present and the key press detection is activated (just because it is enabled when you insert a headset), it randomly reports a keypress on insert. E.g. (KEY_PLAYPAUSE) Event: (SW_HEADPHONE_INSERT), value 1 Event: (SW_MICROPHONE_INSERT), value 1 Event: -------------- SYN_REPORT ------------ Event: (KEY_PLAYPAUSE), value 1 Userspace thinks that KEY_PLAYPAUSE is pressed and produces the annoying effect that the media player starts a play/pause loop. Note that, although most of the time the key reported is the one associated with BTN_0, not always this is true. On my tests I also saw different keys reported Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20190719173929.24065-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: cs42xx8: Fix MFREQ selection issue for async modeShengjiu Wang
When sample rate of TX is different with sample rate of RX in async mode, the MFreq selection will be wrong. For example, sysclk = 24.576MHz, TX rate = 96000Hz, RX rate = 48000Hz. Then ratio of TX = 256, ratio of RX = 512, For MFreq is shared by TX and RX instance, the correct value of MFreq is 2 for both TX and RX. But original method will cause MFreq = 0 for TX, MFreq = 2 for RX. If TX is started after RX, RX will be impacted, RX work abnormal with MFreq = 0. This patch is to select proper MFreq value according to TX rate and RX rate. Fixes: 0c516b4ff85c ("ASoC: cs42xx8: Add codec driver support for CS42448/CS42888") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/20190716094547.46787-1-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walksCharles Keepax
DPCM uses snd_soc_dapm_dai_get_connected_widgets to build a list of the widgets connected to a specific front end DAI so it can search through this list for available back end DAIs. The custom_stop_condition was added to is_connected_ep to facilitate this list not containing more widgets than is necessary. Doing so both speeds up the DPCM handling as less widgets need to be searched and avoids issues with CODEC to CODEC links as these would be confused with back end DAIs if they appeared in the list of available widgets. custom_stop_condition was implemented by aborting the graph walk when the condition is triggered, however there is an issue with this approach. Whilst walking the graph is_connected_ep should update the endpoints cache on each widget, if the walk is aborted the number of attached end points is unknown for that sub-graph. When the stop condition triggered, the original patch ignored the triggering widget and returned zero connected end points; a later patch updated this to set the triggering widget's cache to 1 and return that. Both of these approaches result in inaccurate values being stored in various end point caches as the values propagate back through the graph, which can result in later issues with widgets powering/not powering unexpectedly. As the original goal was to reduce the size of the widget list passed to the DPCM code, the simplest solution is to limit the functionality of the custom_stop_condition to the widget list. This means the rest of the graph will still be processed resulting in correct end point caches, but only widgets up to the stop condition will be added to the returned widget list. Fixes: 6742064aef7f ("ASoC: dapm: support user-defined stop condition in dai_get_connected_widgets") Fixes: 5fdd022c2026 ("ASoC: dpcm: play nice with CODEC<->CODEC links") Fixes: 09464974eaa8 ("ASoC: dapm: Fix to return correct path list in is_connected_ep.") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190718084333.15598-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-21Linus 5.3-rc1Linus Torvalds
2019-07-21Merge tag 'devicetree-fixes-for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
2019-07-21Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
2019-07-21Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
2019-07-21iommu/amd: fix a crash in iova_magazine_free_pfnsQian Cai
The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-21hexagon: switch to generic version of pte allocationMike Rapoport
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-21Merge tag 'ntb-5.3' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
2019-07-20typo fix: it's d_make_root, not d_make_inode...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-07-20dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examplesRob Herring
Now that examples are validated against the DT schema, an error with required 'clocks' property missing is exposed: Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@40020000: gpio@0: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@1000: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@2000: 'clocks' is a required property Add the missing 'clocks' properties to the examples to fix the errors. Fixes: 2c9239c125f0 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: iio: ad7124: Fix dtc warnings in exampleRob Herring
With the conversion to DT schema, the examples are now compiled with dtc. The ad7124 binding example has the following warning: Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \ Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) There's a default #size-cells and #address-cells values of 1 for examples. For examples needing different values such as this one on a SPI bus, they need to provide a SPI bus parent node. Fixes: 26ae15e62d3c ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: iio: avia-hx711: Fix avdd-supply typo in exampleRob Herring
Now that examples are validated against the DT schema, a typo in avia-hx711 example generates a warning: Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property Fix the typo. Fixes: 5150ec3fe125 ("avia-hx711.yaml: transform DT binding to YAML") Cc: Andreas Klinger <ak@it-klinger.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: pinctrl: aspeed: Fix AST2500 example errorsRob Herring
The schema examples are now validated against the schema itself. The AST2500 pinctrl schema has a couple of errors: Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ pinctrl: aspeed,external-nodes: [[1, 2]] is too short Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errorsRob Herring
The Aspeed pinctl schema have errors in the 'compatible' schema: Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements Flow style sequences have to be quoted if the vales contain ','. Fix this by using the more common one line per entry formatting. Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937bb5c ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodesRob Herring
Matching on the 'cpus' node was a bad choice because the schema is incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus schema which checks the general structure, it is also redundant to do so in the Risc-V CPU schema. The downside is one could conceivably mix different architecture's cpu nodes or have typos in the compatible string. The latter problem pretty much exists for every schema. Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: Ensure child nodes are of type 'object'Rob Herring
Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: - Apple SPI keyboard and trackpad driver for newer Macs - ALPS driver will ignore trackpoint-only devices to give the trackpoint driver a chance to handle them properly - another Lenovo is switched over to SMbus from PS/2 - assorted driver fixups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - fix a mismatch between a condition check and its comment Input: psmouse - fix build error of multiple definition Input: applespi - remove set but not used variables 'sts' Input: add Apple SPI keyboard and trackpad driver Input: alps - don't handle ALPS cs19 trackpoint-only device Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer Input: adp5589 - initialize GPIO controller parent device Input: iforce - remove empty multiline comments Input: synaptics - fix misuse of strlcpy Input: auo-pixcir-ts - switch to using devm_add_action_or_reset() Input: gtco - bounds check collection indent level Input: mtk-pmic-keys - add of_node_put() before return Input: sun4i-lradc-keys - add of_node_put() before return Input: synaptics - whitelist Lenovo T580 SMBus intertouch
2019-07-20Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions: - force unencrypted dma-coherent buffers if encryption bit can't fit into the dma coherent mask (Tom Lendacky) - avoid limiting request size if swiotlb is not used (me) - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang Duan)" * tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma-direct: only limit the mapping size if swiotlb could be used dma-mapping: add a dma_addressing_limited helper dma-direct: Force unencrypted DMA under SME for certain DMA masks
2019-07-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 specific fixes and updates: - The CR2 corruption fixes which store CR2 early in the entry code and hand the stored address to the fault handlers. - Revert a forgotten leftover of the dropped FSGSBASE series. - Plug a memory leak in the boot code. - Make the Hyper-V assist functionality robust by zeroing the shadow page. - Remove a useless check for dead processes with LDT - Update paravirt and VMware maintainers entries. - A few cleanup patches addressing various compiler warnings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Prevent clobbering of saved CR2 value x86/hyper-v: Zero out the VP ASSIST PAGE on allocation x86, boot: Remove multiple copy of static function sanitize_boot_params() x86/boot/compressed/64: Remove unused variable x86/boot/efi: Remove unused variables x86/mm, tracing: Fix CR2 corruption x86/entry/64: Update comments and sanity tests for create_gap x86/entry/64: Simplify idtentry a little x86/entry/32: Simplify common_exception x86/paravirt: Make read_cr2() CALLEE_SAVE MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE x86/process: Delete useless check for dead process with LDT x86: math-emu: Hide clang warnings for 16-bit overflow x86/e820: Use proper booleans instead of 0/1 x86/apic: Silence -Wtype-limits compiler warnings x86/mm: Free sme_early_buffer after init x86/boot: Fix memory leak in default_get_smp_config() Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
2019-07-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Thomas Gleixner: "A set of perf improvements and fixes: perf db-export: - Improvements in how COMM details are exported to databases for post processing and use in the sql-viewer.py UI. - Export switch events to the database. BPF: - Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just like selftests/bpf/bpf_rlimit.h do, which makes errors due to exhaustion of this limit, which are kinda cryptic (EPERM sometimes) less frequent. perf version: - Fix segfault due to missing OPT_END(), noticed on PowerPC. perf vendor events: - Add JSON files for IBM s/390 machine type 8561. perf cs-etm (ARM): - Fix two cases of error returns not bing done properly: Invalid ERR_PTR() use and loss of propagation error codes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) perf version: Fix segfault due to missing OPT_END() perf vendor events s390: Add JSON files for machine type 8561 perf cs-etm: Return errcode in cs_etm__process_auxtrace_info() perf cs-etm: Remove errnoeous ERR_PTR() usage in cs_etm__process_auxtrace_info perf scripts python: export-to-postgresql.py: Export switch events perf scripts python: export-to-sqlite.py: Export switch events perf db-export: Export switch events perf db-export: Factor out db_export__threads() perf script: Add scripting operation process_switch() perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column perf scripts python: exported-sql-viewer.py: Remove redundant semi-colons perf scripts python: export-to-postgresql.py: Add has_calls column to comms table perf scripts python: export-to-sqlite.py: Add has_calls column to comms table perf db-export: Also export thread's current comm perf db-export: Factor out db_export__comm() perf scripts python: export-to-postgresql.py: Export comm details perf scripts python: export-to-sqlite.py: Export comm details perf db-export: Export comm details perf db-export: Fix a white space issue in db_export__sample() perf db-export: Move export__comm_thread into db_export__sample() ...
generated by cgit (git 2.34.1) at 2025-09-16 09:32:45 +0000