summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-25net: macb: convert to phylink_generic_validate()Russell King (Oracle)
Populate the supported interfaces bitmap and MAC capabilities mask for the macb driver and remove the old validate implementation. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1mpuRv-00D4rb-Lz@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-25r8169: disable detection of chip version 60Heiner Kallweit
It seems only XID 609 made it to the mass market. Therefore let's disable detection of the other RTL8125a XID's. If nobody complains we can remove support for RTL_GIGA_MAC_VER_60 later. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/2cd3df01-5f8b-08dd-6def-3f31a3014bde@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-25Merge tag 'drm-fixes-2021-11-26' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "No idea if turkey comes before pull request processing, but here's the regular week's fixes. A bunch for amdgpu, nouveau adds support for a new GPU (like a PCI ID addition), and a scattering of fixes across i915/hyperv/aspeed/vc4. Specifics: amdgpu: - SRIOV fixes - dma-buf double free fix - Display fixes for GPU resets - Fix DSC powergating regression - GPU TSC fixes - Interrupt handler overflow fixes - Endian fix in IP discovery table handling - Aldebaran ASPM fix - Fix overclocking regression on older asics - Backlight/ACPI fix amdkfd: - SVM fixes - VMA removal race fix hyperv: - removal fix aspeed: - vga_pw sysfs file fix vc4: - error checking fix nouveau: - support GA106 - fix a few error checks i915: - fix wakeref handling around PXP suspend" * tag 'drm-fixes-2021-11-26' of git://anongit.freedesktop.org/drm/drm: (25 commits) drm/amd/display: update bios scratch when setting backlight drm/amdgpu/pm: fix powerplay OD interface drm/amdgpu: Skip ASPM programming on aldebaran drm/amdgpu: fix byteorder error in amdgpu discovery drm/amdgpu: enable Navi retry fault wptr overflow drm/amdgpu: enable Navi 48-bit IH timestamp counter drm/amdkfd: simplify drain retry fault drm/amdkfd: handle VMA remove race drm/amdkfd: process exit and retry fault race drm/amdgpu: IH process reset count when restart drm/amdgpu/gfx9: switch to golden tsc registers for renoir+ drm/amdgpu/gfx10: add wraparound gpu counter check for APUs as well drm/amdgpu: move kfd post_reset out of reset_sriov function drm/amd/display: Fixed DSC would not PG after removing DSC stream drm/amd/display: Reset link encoder assignments for GPU reset drm/amd/display: Set plane update flags for all planes in reset drm/amd/display: Fix DPIA outbox timeout after GPU reset drm/amdgpu: Fix double free of dmabuf drm/amdgpu: Fix MMIO HDP flush on SRIOV drm/i915/gt: Hold RPM wakelock during PXP suspend ...
2021-11-26Merge tag 'drm-intel-fixes-2021-11-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Fix wakeref handling of PXP suspend. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YZ65bsPOK+6JLv0d@intel.com
2021-11-26Merge tag 'drm-misc-fixes-2021-11-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes One removal fix for hyperv, one fix in aspeed for the vga_pw sysfs file content, one error-checking fix for vc4 and two fixes for nouveau, one to support a new device and another one to properly check for errors. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211125101819.ynu7zgbs7yfwedri@houat
2021-11-26Merge tag 'amd-drm-fixes-5.16-2021-11-24' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-11-24: amdgpu: - SRIOV fixes - dma-buf double free fix - Display fixes for GPU resets - Fix DSC powergating regression - GPU TSC fixes - Interrupt handler overflow fixes - Endian fix in IP discovery table handling - Aldebaran ASPM fix - Fix overclocking regression on older asics - Backlight/ACPI fix amdkfd: - SVM fixes - VMA removal race fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124212056.6327-1-alexander.deucher@amd.com
2021-11-26selftests/bpf: Fix misaligned accesses in xdp and xdp_bpf2bpf testsAndrii Nakryiko
Similar to previous patch, just copy over necessary struct into local stack variable before checking its fields. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-14-andrii@kernel.org
2021-11-26selftests/bpf: Fix misaligned memory accesses in xdp_bonding testAndrii Nakryiko
Construct packet buffer explicitly for each packet to avoid unaligned memory accesses. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-13-andrii@kernel.org
2021-11-26selftests/bpf: Prevent out-of-bounds stack access in test_bpffsAndrii Nakryiko
Buf can be not zero-terminated leading to strstr() to access data beyond the intended buf[] array. Fix by forcing zero termination. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-12-andrii@kernel.org
2021-11-26selftests/bpf: Fix misaligned memory access in queue_stack_map testAndrii Nakryiko
Copy over iphdr into a local variable before accessing its fields. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-11-andrii@kernel.org
2021-11-26selftests/bpf: Prevent misaligned memory access in get_stack_raw_tp testAndrii Nakryiko
Perfbuf doesn't guarantee 8-byte alignment of the data like BPF ringbuf does, so struct get_stack_trace_t can arrive not properly aligned for subsequent u64 accesses. Easiest fix is to just copy data locally. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-10-andrii@kernel.org
2021-11-26selftests/bpf: Fix possible NULL passed to memcpy() with zero sizeAndrii Nakryiko
Prevent sanitizer from complaining about passing NULL into memcpy(), even if it happens with zero size. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-9-andrii@kernel.org
2021-11-26selftests/bpf: Fix UBSan complaint about signed __int128 overflowAndrii Nakryiko
Test is using __int128 variable as unsigned and highest order bit can be set to 1 after bit shift. Use unsigned __int128 explicitly and prevent UBSan from complaining. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-8-andrii@kernel.org
2021-11-26libbpf: Fix using invalidated memory in bpf_linkerAndrii Nakryiko
add_dst_sec() can invalidate bpf_linker's section index making dst_symtab pointer pointing into unallocated memory. Reinitialize dst_symtab pointer on each iteration to make sure it's always valid. Fixes: faf6ed321cf6 ("libbpf: Add BPF static linker APIs") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-7-andrii@kernel.org
2021-11-26libbpf: Fix glob_syms memory leak in bpf_linkerAndrii Nakryiko
glob_syms array wasn't freed on bpf_link__free(). Fix that. Fixes: a46349227cd8 ("libbpf: Add linker extern resolution support for functions and global variables") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-6-andrii@kernel.org
2021-11-26libbpf: Don't call libc APIs with NULL pointersAndrii Nakryiko
Sanitizer complains about qsort(), bsearch(), and memcpy() being called with NULL pointer. This can only happen when the associated number of elements is zero, so no harm should be done. But still prevent this from happening to keep sanitizer runs clean from extra noise. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-5-andrii@kernel.org
2021-11-26libbpf: Fix potential misaligned memory access in btf_ext__new()Andrii Nakryiko
Perform a memory copy before we do the sanity checks of btf_ext_hdr. This prevents misaligned memory access if raw btf_ext data is not 4-byte aligned ([0]). While at it, also add missing const qualifier. [0] Closes: https://github.com/libbpf/libbpf/issues/391 Fixes: 2993e0515bb4 ("tools/bpf: add support to read .BTF.ext sections") Reported-by: Evgeny Vereshchagin <evvers@ya.ru> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-3-andrii@kernel.org
2021-11-26tools/resolve_btf_ids: Close ELF file on errorAndrii Nakryiko
Fix one case where we don't do explicit clean up. Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124002325.1737739-2-andrii@kernel.org
2021-11-25selftests/bpf: Migrate selftests to bpf_map_create()Andrii Nakryiko
Conversion is straightforward for most cases. In few cases tests are using mutable map_flags and attribute structs, but bpf_map_create_opts can be used in the similar fashion, so there were no problems. Just lots of repetitive conversions. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124193233.3115996-5-andrii@kernel.org
2021-11-25libbpf: Prevent deprecation warnings in xsk.cAndrii Nakryiko
xsk.c is using own APIs that are marked for deprecation internally. Given xsk.c and xsk.h will be gone in libbpf 1.0, there is no reason to do public vs internal function split just to avoid deprecation warnings. So just add a pragma to silence deprecation warnings (until the code is removed completely). Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124193233.3115996-4-andrii@kernel.org
2021-11-25libbpf: Use bpf_map_create() consistently internallyAndrii Nakryiko
Remove all the remaining uses of to-be-deprecated bpf_create_map*() APIs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124193233.3115996-3-andrii@kernel.org
2021-11-25libbpf: Unify low-level map creation APIs w/ new bpf_map_create()Andrii Nakryiko
Mark the entire zoo of low-level map creation APIs for deprecation in libbpf 0.7 ([0]) and introduce a new bpf_map_create() API that is OPTS-based (and thus future-proof) and matches the BPF_MAP_CREATE command name. While at it, ensure that gen_loader sends map_extra field. Also remove now unneeded btf_key_type_id/btf_value_type_id logic that libbpf is doing anyways. [0] Closes: https://github.com/libbpf/libbpf/issues/282 Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211124193233.3115996-2-andrii@kernel.org
2021-11-25selftests/bpf: Mix legacy (maps) and modern (vars) BPF in one testAndrii Nakryiko
Add selftest that combines two BPF programs within single BPF object file such that one of the programs is using global variables, but can be skipped at runtime on old kernels that don't support global data. Another BPF program is written with the goal to be runnable on very old kernels and only relies on explicitly accessed BPF maps. Such test, run against old kernels (e.g., libbpf CI will run it against 4.9 kernel that doesn't support global data), allows to test the approach and ensure that libbpf doesn't make unnecessary assumption about necessary kernel features. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211123200105.387855-2-andrii@kernel.org
2021-11-25libbpf: Load global data maps lazily on legacy kernelsAndrii Nakryiko
Load global data maps lazily, if kernel is too old to support global data. Make sure that programs are still correct by detecting if any of the to-be-loaded programs have relocation against any of such maps. This allows to solve the issue ([0]) with bpf_printk() and Clang generating unnecessary and unreferenced .rodata.strX.Y sections, but it also goes further along the CO-RE lines, allowing to have a BPF object in which some code can work on very old kernels and relies only on BPF maps explicitly, while other BPF programs might enjoy global variable support. If such programs are correctly set to not load at runtime on old kernels, bpf_object will load and function correctly now. [0] https://lore.kernel.org/bpf/CAK-59YFPU3qO+_pXWOH+c1LSA=8WA1yabJZfREjOEXNHAqgXNg@mail.gmail.com/ Fixes: aed659170a31 ("libbpf: Support multiple .rodata.* and .data.* BPF maps") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211123200105.387855-1-andrii@kernel.org
2021-11-25Merge tag 'block-5.16-2021-11-25' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Add a NO APST quirk for a Kioxia device (Enzo Matsumiya) - Fix write zeroes pi (Klaus Jensen) - Various TCP transport fixes (Maurizio Lombardi and Varun Prakash) - Ignore invalid fast_io_fail_tmo values (Maurizio Lombardi) - Use IOCB_NOWAIT only if the filesystem supports it (Maurizio Lombardi) - Module loading fix (Ming) - Kerneldoc warning fix (Yang) * tag 'block-5.16-2021-11-25' of git://git.kernel.dk/linux-block: block: fix parameter not described warning nvmet: use IOCB_NOWAIT only if the filesystem supports it nvme: fix write zeroes pi nvme-fabrics: ignore invalid fast_io_fail_tmo values nvme-pci: add NO APST quirk for Kioxia device nvme-tcp: fix memory leak when freeing a queue nvme-tcp: validate R2T PDU in nvme_tcp_handle_r2t() nvmet-tcp: fix incomplete data digest send nvmet-tcp: fix memory leak when performing a controller reset nvmet-tcp: add an helper to free the cmd buffers nvmet-tcp: fix a race condition between release_queue and io_work block: avoid to touch unloaded module instance when opening bdev
2021-11-25Merge tag 'io_uring-5.16-2021-11-25' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "A locking fix for link traversal, and fixing up an outdated function name in a comment" * tag 'io_uring-5.16-2021-11-25' of git://git.kernel.dk/linux-block: io_uring: correct link-list traversal locking io_uring: fix missed comment from *task_file rename
2021-11-25Merge tag '5.16-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Four small cifs/smb3 fixes: - two multichannel fixes - fix problem noted by kernel test robot - update internal version number" * tag '5.16-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal version number smb2: clarify rc initialization in smb2_reconnect cifs: populate server_hostname for extra channels cifs: nosharesock should be set on new server
2021-11-25Merge tag 'asm-generic-5.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic syscall table update from Arnd Bergmann: "André Almeida sends an update for the newly added futex_waitv syscall that was initially only added to a few architectures. Some additional ones have since made it through architecture maintainer trees, this finishes the remaining ones" * tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: futex: Wireup futex_waitv syscall
2021-11-25Merge tag 'arm-fixes-5.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are only a few devicetree fixes this time: - one outdated devicetree property that slipped into the newly added ExynosAutov9 support - three changes to Broadcom SoCs that had incorrect number values for interrupts or irqchips. In the MAINTAINERS file, Nishanth Menon gets listed for TI K3 SoCs, while Taichi Sugaya and Takao Orito take ownership of the Socionext Milbeaut platform. All other changes are for SoC specific drivers, fixing: - A missing NULL pointer check in the mediatek memory driver - An integer overflow issue in the Arm smccc firwmare interface - A false-positive fortify-source check - Error handling fixes for optee and smci - Incorrect message format in one SCMI call" * tag 'arm-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: memory: mtk-smi: Fix a null dereference for the ostd arm64: dts: exynos: drop samsung,ufs-shareability-reg-offset in ExynosAutov9 MAINTAINERS: Update maintainer entry for keystone platforms MAINTAINERS: Add entry to MAINTAINERS for Milbeaut firmware: smccc: Fix check for ARCH_SOC_ID not implemented ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE firmware: arm_scmi: Fix type error assignment in voltage protocol firmware: arm_scmi: Fix type error in sensor protocol firmware: arm_scmi: pm: Propagate return value to caller firmware: arm_scmi: Fix base agent discover response optee: fix kfree NULL pointer ARM: dts: bcm2711: Fix PCIe interrupts ARM: dts: BCM5301X: Add interrupt properties to GPIO node ARM: dts: BCM5301X: Fix I2C controller interrupt firmware: arm_scmi: Fix null de-reference on error path
2021-11-25Merge tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds
Pull folio fixes from Matthew Wilcox: "In the course of preparing the folio changes for iomap for next merge window, we discovered some problems that would be nice to address now: - Renaming multi-page folios to large folios. mapping_multi_page_folio_support() is just a little too long, so we settled on mapping_large_folio_support(). That meant renaming, eg folio_test_multi() to folio_test_large(). Rename AS_THP_SUPPORT to match - I hadn't included folio wrappers for zero_user_segments(), etc. Also, multi-page^W^W large folio support is now independent of CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need to fall back to the out-of-line zero_user_segments(). Remove FS_THP_SUPPORT to match - The build bots finally got round to telling me that I missed a couple of architectures when adding flush_dcache_folio(). Christoph suggested that we just add linux/cacheflush.h and not rely on asm-generic/cacheflush.h" * tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache: mm: Add functions to zero portions of a folio fs: Rename AS_THP_SUPPORT and mapping_thp_support fs: Remove FS_THP_SUPPORT mm: Remove folio_test_single mm: Rename folio_test_multi to folio_test_large Add linux/cacheflush.h
2021-11-25serial: 8250_pci: rewrite pericom_do_set_divisor()Jay Dolan
Have pericom_do_set_divisor() use the uartclk instead of a hard coded value to work with different speed crystals. Tested with 14.7456 and 24 MHz crystals. Have pericom_do_set_divisor() always calculate the divisor rather than call serial8250_do_set_divisor() for rates below baud_base. Do not write registers or call serial8250_do_set_divisor() if valid divisors could not be found. Fixes: 6bf4e42f1d19 ("serial: 8250: Add support for higher baud rates to Pericom chips") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211122120604.3909-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: 8250_pci: Fix ACCES entries in pci_serial_quirks arrayJay Dolan
Fix error in table for PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S that caused it and PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 to be missing their fourth port. Fixes: 78d3820b9bd3 ("serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211122120604.3909-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: 8250: Fix RTS modem control while in rs485 modeLukas Wunner
Commit f45709df7731 ("serial: 8250: Don't touch RTS modem control while in rs485 mode") sought to prevent user space from interfering with rs485 communication by ignoring a TIOCMSET ioctl() which changes RTS polarity. It did so in serial8250_do_set_mctrl(), which turns out to be too deep in the call stack: When a uart_port is opened, RTS polarity is set by the rs485-aware function uart_port_dtr_rts(). It calls down to serial8250_do_set_mctrl() and that particular RTS polarity change should *not* be ignored. The user-visible result is that on 8250_omap ports which use rs485 with inverse polarity (RTS bit in MCR register is 1 to receive, 0 to send), a newly opened port initially sets up RTS for sending instead of receiving. That's because omap_8250_startup() sets the cached value up->mcr to 0 and omap_8250_restore_regs() subsequently writes it to the MCR register. Due to the commit, serial8250_do_set_mctrl() preserves that incorrect register value: do_sys_openat2 do_filp_open path_openat vfs_open do_dentry_open chrdev_open tty_open uart_open tty_port_open uart_port_activate uart_startup uart_port_startup serial8250_startup omap_8250_startup # up->mcr = 0 uart_change_speed serial8250_set_termios omap_8250_set_termios omap_8250_restore_regs serial8250_out_MCR # up->mcr written tty_port_block_til_ready uart_dtr_rts uart_port_dtr_rts serial8250_set_mctrl omap8250_set_mctrl serial8250_do_set_mctrl # mcr[1] = 1 ignored Fix by intercepting RTS changes from user space in uart_tiocmset() instead. Link: https://lore.kernel.org/linux-serial/20211027111644.1996921-1-baocheng.su@siemens.com/ Fixes: f45709df7731 ("serial: 8250: Don't touch RTS modem control while in rs485 mode") Cc: Chao Zeng <chao.zeng@siemens.com> Cc: stable@vger.kernel.org # v5.7+ Reported-by: Su Bao Cheng <baocheng.su@siemens.com> Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Su Bao Cheng <baocheng.su@siemens.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/21170e622a1aaf842a50b32146008b5374b3dd1d.1637596432.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"Alexander Stein
Revert commit b4b844930f27 ("tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"), because this breaks earlycon support on imx8qm/imx8qxp. While it is true that for earlycon there is no difference between i.MX8QXP and i.MX7ULP (for now at least), there are differences regarding clocks and fixups for wakeup support. For that reason it was deemed unacceptable to add the imx7ulp compatible to device tree in order to get earlycon working again. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20211124073109.805088-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30Patrik John
The current implementation uses 0 as lower limit for the baud rate tolerance for tegra20 and tegra30 chips which causes isses on UART initialization as soon as baud rate clock is lower than required even when within the standard UART tolerance of +/- 4%. This fix aligns the implementation with the initial commit description of +/- 4% tolerance for tegra chips other than tegra186 and tegra194. Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors") Cc: stable <stable@vger.kernel.org> Signed-off-by: Patrik John <patrik.john@u-blox.com> Link: https://lore.kernel.org/r/sig.19614244f8.20211123132737.88341-1-patrik.john@u-blox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: liteuart: relax compile-test dependenciesJohan Hovold
The LITEX symbol is neither a build or runtime dependency for the liteuart serial driver. LITEX is selected by the "LiteX SoC Controller" driver, which does a probe-time register-access sanity check and panics if the SoC has not been configured correctly. That driver's Kconfig entry asserts that any LiteX driver using the LiteX register accessors should depend on LITEX, but currently only the serial driver complies. Relax this LITEX "dependency" in order to make it easier to compile test the driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211117100512.5058-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: liteuart: fix minor-number leak on probe errorsJohan Hovold
Make sure to release the allocated minor number before returning on probe errors. Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver") Cc: stable@vger.kernel.org # 5.11 Cc: Filip Kokosinski <fkokosinski@antmicro.com> Cc: Mateusz Holenko <mholenko@antmicro.com> Reviewed-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211117100512.5058-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: liteuart: fix use-after-free and memleak on unbindJohan Hovold
Deregister the port when unbinding the driver to prevent it from being used after releasing the driver data and leaking memory allocated by serial core. Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver") Cc: stable@vger.kernel.org # 5.11 Cc: Filip Kokosinski <fkokosinski@antmicro.com> Cc: Mateusz Holenko <mholenko@antmicro.com> Reviewed-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211117100512.5058-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: liteuart: Fix NULL pointer dereference in ->remove()Ilia Sergachev
drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove(). Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver") Cc: stable <stable@vger.kernel.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilia Sergachev <silia@ethz.ch> Link: https://lore.kernel.org/r/20211115224944.23f8c12b@dtkw Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25vgacon: Propagate console boot parameters before calling `vc_resize'Maciej W. Rozycki
Fix a division by zero in `vgacon_resize' with a backtrace like: vgacon_resize vc_do_resize vgacon_init do_bind_con_driver do_unbind_con_driver fbcon_fb_unbind do_unregister_framebuffer do_register_framebuffer register_framebuffer __drm_fb_helper_initial_config_and_unlock drm_helper_hpd_irq_event dw_hdmi_irq irq_thread kthread caused by `c->vc_cell_height' not having been initialized. This has only started to trigger with commit 860dafa90259 ("vt: Fix character height handling with VT_RESIZEX"), however the ultimate offender is commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console"). Said commit has added a call to `vc_resize' whenever `vgacon_init' is called with the `init' argument set to 0, which did not happen before. And the call is made before a key vgacon boot parameter retrieved in `vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to use to the console structure being worked on. Previously the parameter was `c->vc_font.height' and now it is `c->vc_cell_height'. In this particular scenario the registration of fbcon has failed and vt resorts to vgacon. Now fbcon does have initialized `c->vc_font.height' somehow, unlike `c->vc_cell_height', which is why this code did not crash before, but either way the boot parameters should have been copied to the console structure ahead of the call to `vc_resize' rather than afterwards, so that first the call has a chance to use them and second they do not change the console structure to something possibly different from what was used by `vc_resize'. Move the propagation of the vgacon boot parameters ahead of the call to `vc_resize' then. Adjust the comment accordingly. Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console") Cc: stable@vger.kernel.org # v2.6.18+ Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25tty: serial: msm_serial: Deactivate RX DMA for polling supportSven Eckelmann
The CONSOLE_POLLING mode is used for tools like k(g)db. In this kind of setup, it is often sharing a serial device with the normal system console. This is usually no problem because the polling helpers can consume input values directly (when in kgdb context) and the normal Linux handlers can only consume new input values after kgdb switched back. This is not true anymore when RX DMA is enabled for UARTDM controllers. Single input values can no longer be received correctly. Instead following seems to happen: * on 1. input, some old input is read (continuously) * on 2. input, two old inputs are read (continuously) * on 3. input, three old input values are read (continuously) * on 4. input, 4 previous inputs are received This repeats then for each group of 4 input values. This behavior changes slightly depending on what state the controller was when the first input was received. But this makes working with kgdb basically impossible because control messages are always corrupted when kgdboc tries to parse them. RX DMA should therefore be off when CONSOLE_POLLING is enabled to avoid these kind of problems. No such problem was noticed for TX DMA. Fixes: 99693945013a ("tty: serial: msm: Add RX DMA support") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20211113121050.7266-1-sven@narfation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: pl011: Add ACPI SBSA UART match idPierre Gondois
The document 'ACPI for Arm Components 1.0' defines the following _HID mappings: -'Prime cell UART (PL011)': ARMH0011 -'SBSA UART': ARMHB000 Use the sbsa-uart driver when a device is described with the 'ARMHB000' _HID. Note: PL011 devices currently use the sbsa-uart driver instead of the uart-pl011 driver. Indeed, PL011 devices are not bound to a clock in ACPI. It is not possible to change their baudrate. Cc: <stable@vger.kernel.org> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Link: https://lore.kernel.org/r/20211109172248.19061-1-Pierre.Gondois@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: core: fix transmit-buffer reset and memleakJohan Hovold
Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") converted serial core to use tty_port_close() but failed to notice that the transmit buffer still needs to be freed on final close. Not freeing the transmit buffer means that the buffer is no longer cleared on next open so that any ioctl() waiting for the buffer to drain might wait indefinitely (e.g. on termios changes) or that stale data can end up being transmitted in case tx is restarted. Furthermore, the buffer of any port that has been opened would leak on driver unbind. Note that the port lock is held when clearing the buffer pointer due to the ldisc race worked around by commit a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()"). Also note that the tty-port shutdown() callback is not called for console ports so it is not strictly necessary to free the buffer page after releasing the lock (cf. d72402145ace ("tty/serial: do not free trasnmit buffer page under port lock")). Link: https://lore.kernel.org/r/319321886d97c456203d5c6a576a5480d07c3478.1635781688.git.baruch@tkos.co.il Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") Cc: stable@vger.kernel.org # 4.9 Cc: Rob Herring <robh@kernel.org> Reported-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211108085431.12637-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25MAINTAINERS: Add rpmsg tty driver maintainerArnaud Pouliquen
Adding myself as rpmsg tty maintainer and also adding remoteproc mailing list to inform about changes in the driver. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20211102123817.19874-1-arnaud.pouliquen@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25block: fix parameter not described warningYang Guang
The build warning: block/blk-core.c:968: warning: Function parameter or member 'iob' not described in 'bio_poll'. Fixes: 5a72e899ceb4 ("block: add a struct io_comp_batch argument to fops->iopoll()") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-25MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48Huang Pei
It hangup when booting Loongson 3A1000 with BOTH CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn out to use 2-level pgtable instead of 3-level. 64KB page size with 2-level pgtable only cover 42 bits VA, use 3-level pgtable to cover all 48 bits VA(55 bits) Fixes: 1e321fa917fb ("MIPS64: Support of at least 48 bits of SEGBITS) Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-25KVM: arm64: Avoid setting the upper 32 bits of TCR_EL2 and CPTR_EL2 to 1Catalin Marinas
Having a signed (1 << 31) constant for TCR_EL2_RES1 and CPTR_EL2_TCPAC causes the upper 32-bit to be set to 1 when assigning them to a 64-bit variable. Bit 32 in TCR_EL2 is no longer RES0 in ARMv8.7: with FEAT_LPA2 it changes the meaning of bits 49:48 and 9:8 in the stage 1 EL2 page table entries. As a result of the sign-extension, a non-VHE kernel can no longer boot on a model with ARMv8.7 enabled. CPTR_EL2 still has the top 32 bits RES0 but we should preempt any future problems Make these top bit constants unsigned as per commit df655b75c43f ("arm64: KVM: Avoid setting the upper 32 bits of VTCR_EL2 to 1"). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Chris January <Chris.January@arm.com> Cc: <stable@vger.kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211125152014.2806582-1-catalin.marinas@arm.com
2021-11-25MIPS: loongson64: fix FTLB configurationHuang Pei
It turns out that 'decode_configs' -> 'set_ftlb_enable' is called under c->cputype unset, which leaves FTLB disabled on BOTH 3A2000 and 3A3000 Fix it by calling "decode_configs" after c->cputype is initialized Fixes: da1bd29742b1 ("MIPS: Loongson64: Probe CPU features via CPUCFG") Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-25MIPS: Fix using smp_processor_id() in preemptible in show_cpuinfo()Tiezhu Yang
There exists the following issue under DEBUG_PREEMPT: BUG: using smp_processor_id() in preemptible [00000000] code: systemd/1 caller is show_cpuinfo+0x460/0xea0 ... Call Trace: [<ffffffff8020f0dc>] show_stack+0x94/0x128 [<ffffffff80e6cab4>] dump_stack_lvl+0x94/0xd8 [<ffffffff80e74c5c>] check_preemption_disabled+0x104/0x110 [<ffffffff802209c8>] show_cpuinfo+0x460/0xea0 [<ffffffff80539d54>] seq_read_iter+0xfc/0x4f8 [<ffffffff804fcc10>] new_sync_read+0x110/0x1b8 [<ffffffff804ff57c>] vfs_read+0x1b4/0x1d0 [<ffffffff804ffb18>] ksys_read+0xd0/0x110 [<ffffffff8021c090>] syscall_common+0x34/0x58 We can see the following call trace: show_cpuinfo() cpu_has_fpu current_cpu_data smp_processor_id() $ addr2line -f -e vmlinux 0xffffffff802209c8 show_cpuinfo arch/mips/kernel/proc.c:188 $ head -188 arch/mips/kernel/proc.c | tail -1 if (cpu_has_fpu) arch/mips/include/asm/cpu-features.h # define cpu_has_fpu (current_cpu_data.options & MIPS_CPU_FPU) arch/mips/include/asm/cpu-info.h #define current_cpu_data cpu_data[smp_processor_id()] Based on the above analysis, fix the issue by using raw_cpu_has_fpu which calls raw_smp_processor_id() in show_cpuinfo(). Fixes: 626bfa037299 ("MIPS: kernel: proc: add CPU option reporting") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-25mdio: aspeed: Fix "Link is Down" issueDylan Hung
The issue happened randomly in runtime. The message "Link is Down" is popped but soon it recovered to "Link is Up". The "Link is Down" results from the incorrect read data for reading the PHY register via MDIO bus. The correct sequence for reading the data shall be: 1. fire the command 2. wait for command done (this step was missing) 3. wait for data idle 4. read data from data register Cc: stable@vger.kernel.org Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed") Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20211125024432.15809-1-dylan_hung@aspeedtech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 02:17:40 +0000