summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-27xprtrdma: Invoke rpcrdma_ep_create() in the connect workerChuck Lever
Refactor rpcrdma_ep_create(), rpcrdma_ep_disconnect(), and rpcrdma_ep_destroy(). rpcrdma_ep_create will be invoked at connect time instead of at transport set-up time. It will be responsible for allocating per- connection resources. In this patch it allocates the CQs and creates a QP. More to come. rpcrdma_ep_destroy() is the inverse functionality that is invoked at disconnect time. It will be responsible for releasing the CQs and QP. These changes should be safe to do because both connect and disconnect is guaranteed to be serialized by the transport send lock. This takes us another step closer to resolving the address and route only at connect time so that connection failover to another device will work correctly. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-03-27xprtrdma: Enhance MR-related trace pointsChuck Lever
Two changes: - Show the number of SG entries that were mapped. This helps debug DMA-related problems. - Record the MR's resource ID instead of its memory address. This groups each MR with its associated rdma-tool output, and reduces needless exposure of memory addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-03-27serial: 8250: Optimize irq enable after console writeLukas Wunner
Commit 7f9803072ff6 ("serial: 8250: Support console on software emulated rs485 ports") amended serial8250_console_write() with rs485 support, but positioned the invocation of ->rs485_stop_tx() after re-enablement of interrupts. The irq handler and ->console_write() are serialized with the port spinlock, so no problem there, but due to the rs485 delay, the irq handler may unnecessarily spin for a while. Avoid that by moving ->rs485_stop_tx() before re-enablement of interrupts, which also mirrors the order at the beginning of serial8250_console_write(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/019839cb1f61b01210b6ff9ac9f9079ca77f8411.1585319447.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-27serial: 8250: Fix rs485 delay after console writeLukas Wunner
Due to a silly copy-paste mistake, commit 7f9803072ff6 ("serial: 8250: Support console on software emulated rs485 ports") erroneously pauses for the duration of delay_rts_before_send after writing to the console, instead of delay_rts_after_send. Mea culpa. Fixes: 7f9803072ff6 ("serial: 8250: Support console on software emulated rs485 ports") Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/9dd67f33c90d23f7fafa3b81b1e812ddabf9ca24.1585319447.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-27ASoC: codecs: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87wo7bhci3.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: arm: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87y2rrhcia.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: xtensa: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87zhc7hcih.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: ux500: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/871rpjir34.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: uniphier: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI ↵Kuninori Morimoto
pointer Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87369zir3b.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: txx9: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/874kufir3i.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: ti: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/875zevir3p.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: tegra: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/877dzbir3w.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: sunxi: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/878sjrir43.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: stm: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87a747ir4b.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: sprd: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87blonir4j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: sof: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87d093ir4q.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: sh: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87eetjir4x.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: samsung: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87ftdzir57.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: rockchip: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI ↵Kuninori Morimoto
pointer Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87h7yfir5i.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: qcom: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87imivir5q.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: pxa: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87k13bir62.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: mxs: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87lfnrir6c.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: meson: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87mu87ir6j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: mediatek: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI ↵Kuninori Morimoto
pointer Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87o8snir6s.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: kirkwood: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI ↵Kuninori Morimoto
pointer Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87pnd3ir71.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87r1xjir7a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: img: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87sghzir7m.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: generic: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87tv2fir7y.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: fsl: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87v9mvir89.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: dwc: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87wo7bir8j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: cirrus: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87y2rrir8s.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: bcm: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87zhc7ir94.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: au1x: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/871rpjk5tw.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: atmel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87369zk5ul.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: amd: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/874kufk5uu.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: soc-core: add asoc_rtd_to_cpu/codec() macroKuninori Morimoto
Now, snd_soc_pcm_runtime supports multi cpu_dai/codec_dai. It still has cpu_dai/codec_dai for single DAI, and has cpu_dais/codec_dais for multi DAIs. dais = [][][][][][][][][][][][][][][][][][] ^cpu_dais ^codec_dais |--- num_cpus ---|--- num_codecs --| /* for multi DAIs */ rtd->cpu_dais = &rtd->dais[0]; rtd->codec_dais = &rtd->dais[dai_link->num_cpus]; /* for single DAI */ rtd->cpu_dai = rtd->cpu_dais[0]; rtd->codec_dai = rtd->codec_dais[0]; But, these can be replaced by dais. This patch adds asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/875zevk5va.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27PCI: dwc: pci-dra7xx: Fix MSI IRQ handlingVignesh Raghavendra
Due to an issue with PCIe wrapper logic built for the DWC PCIe IP on dra7xx, the driver needs to ensure that there are no pending MSI IRQ vector set (i.e PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting IRQ handler otherwise the dra7xx PCIe wrapper will not register new MSI IRQs even though PCIE_MSI_INTR0_STATUS reports IRQs are pending. Therefore it's no longer possible to use default IRQ handler provided by DWC library. Add an irqchip implementation inside pci-dra7xx.c and install new MSI IRQ handler to handle the above errata. This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel 8260 used to throw following error and stall during ping/iperf3 tests. [ 97.776310] iwlwifi 0000:01:00.0: Queue 9 stuck for 2500 ms. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-27parisc: Fix defconfig selectionHelge Deller
Fix the recursive loop when running "make ARCH=parisc defconfig". Fixes: 84669923e1ed ("parisc: Regenerate parisc defconfigs") Noticed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2020-03-27scripts/dtc: Remove redundant YYLOC global declarationDirk Mueller
gcc 10 will default to -fno-common, which causes this error at link time: (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here This is because both dtc-lexer as well as dtc-parser define the same global symbol yyloc. Before with -fcommon those were merged into one defintion. The proper solution would be to to mark this as "extern", however that leads to: dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls] 26 | extern YYLTYPE yylloc; | ^~~~~~ In file included from dtc-lexer.l:24: dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here 127 | extern YYLTYPE yylloc; | ^~~~~~ cc1: all warnings being treated as errors which means the declaration is completely redundant and can just be dropped. Signed-off-by: Dirk Mueller <dmueller@suse.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [robh: cherry-pick from upstream] Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-27dt-bindings: Clean-up schema errors due to missing 'addtionalProperties: false'Rob Herring
Numerous schemas are missing 'additionalProperties: false' statements which ensures a binding doesn't have any extra undocumented properties or child nodes. Fixing this reveals various missing properties, so let's fix all those occurrences. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Acked-by: Stephen Boyd <sboyd@kernel.org> # clock Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: netdev@vger.kernel.org Cc: Guillaume La Roque <glaroque@baylibre.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Brown <broonie@kernel.org> Cc: linux-iio@vger.kernel.org Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-clk@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kevin Hilman <khilman@baylibre.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: linux-amlogic@lists.infradead.org Cc: linux-pm@vger.kernel.org Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-media@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org>
2020-03-27ARM: dts: ux500: Fix missing node renamesLinus Walleij
I renamed the dsi-nodes from dsi@ to dsi-controller@ so that the schema check would kick in, but missed to rename it in a few places. Link: https://lore.kernel.org/r/20200326222536.86441-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-27perf/core: Add PERF_SAMPLE_CGROUP featureNamhyung Kim
The PERF_SAMPLE_CGROUP bit is to save (perf_event) cgroup information in the sample. It will add a 64-bit id to identify current cgroup and it's the file handle in the cgroup file system. Userspace should use this information with PERF_RECORD_CGROUP event to match which cgroup it belongs. I put it before PERF_SAMPLE_AUX for simplicity since it just needs a 64-bit word. But if we want bigger samples, I can work on that direction too. Committer testing: $ pahole perf_sample_data | grep -w cgroup -B5 -A5 /* --- cacheline 4 boundary (256 bytes) was 56 bytes ago --- */ struct perf_regs regs_intr; /* 312 16 */ /* --- cacheline 5 boundary (320 bytes) was 8 bytes ago --- */ u64 stack_user_size; /* 328 8 */ u64 phys_addr; /* 336 8 */ u64 cgroup; /* 344 8 */ /* size: 384, cachelines: 6, members: 22 */ /* padding: 32 */ }; $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lore.kernel.org/lkml/20200325124536.2800725-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-27perf/core: Add PERF_RECORD_CGROUP eventNamhyung Kim
To support cgroup tracking, add CGROUP event to save a link between cgroup path and id number. This is needed since cgroups can go away when userspace tries to read the cgroup info (from the id) later. The attr.cgroup bit was also added to enable cgroup tracking from userspace. This event will be generated when a new cgroup becomes active. Userspace might need to synthesize those events for existing cgroups. Committer testing: From the resulting kernel, using /sys/kernel/btf/vmlinux: $ pahole perf_event_attr | grep -w cgroup -B5 -A1 __u64 write_backward:1; /* 40:27 8 */ __u64 namespaces:1; /* 40:28 8 */ __u64 ksymbol:1; /* 40:29 8 */ __u64 bpf_event:1; /* 40:30 8 */ __u64 aux_output:1; /* 40:31 8 */ __u64 cgroup:1; /* 40:32 8 */ __u64 __reserved_1:31; /* 40:33 8 */ $ Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> [staticize perf_event_cgroup function] Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lore.kernel.org/lkml/20200325124536.2800725-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-27perf script: Introduce --deltatime optionHagen Paul Pfeifer
For some kind of analysis a deltatime output is more human friendly and reduce the cognitive load for further analysis. The following output demonstrate the new option "deltatime": calculate the time difference in relation to the previous event. $ perf script --deltatime test 2525 [001] 0.000000: sdt_libev:ev_add: (5635e72a5ebd) test 2525 [001] 0.000091: sdt_libev:epoll_wait_enter: (5635e72a76a9) test 2525 [001] 1.000051: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1 test 2525 [001] 0.000685: sdt_libev:ev_add: (5635e72a5ebd) test 2525 [001] 0.000048: sdt_libev:epoll_wait_enter: (5635e72a76a9) test 2525 [001] 1.000104: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1 test 2525 [001] 0.003895: sdt_libev:epoll_wait_enter: (5635e72a76a9) test 2525 [001] 0.996034: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1 test 2525 [001] 0.000058: sdt_libev:epoll_wait_enter: (5635e72a76a9) test 2525 [001] 1.000004: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1 test 2525 [001] 0.000064: sdt_libev:epoll_wait_enter: (5635e72a76a9) test 2525 [001] 0.999934: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1 test 2525 [001] 0.000056: sdt_libev:epoll_wait_enter: (5635e72a76a9) test 2525 [001] 0.999930: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1 Committer testing: So go from default output to --reltime and then this new --deltatime, to contrast the various timestamp presentation modes for a random perf.data file I had laying around: [root@five ~]# perf script --reltime | head perf 442394 [000] 0.000000: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 0.000002: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 0.000004: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 0.000006: 128 cycles: ffffffff972415a1 perf_event_update_userpage+0x1 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 0.000009: 2597 cycles: ffffffff97463785 cap_task_setscheduler+0x5 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000036: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000038: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000040: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000041: 224 cycles: ffffffff9700a53a perf_ibs_handle_irq+0x1da (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000044: 4439 cycles: ffffffff97120d85 put_prev_entity+0x45 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) [root@five ~]# perf script --deltatime | head perf 442394 [000] 0.000000: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 0.000002: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 0.000001: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 0.000001: 128 cycles: ffffffff972415a1 perf_event_update_userpage+0x1 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 0.000002: 2597 cycles: ffffffff97463785 cap_task_setscheduler+0x5 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000027: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000002: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000001: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000001: 224 cycles: ffffffff9700a53a perf_ibs_handle_irq+0x1da (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 0.000002: 4439 cycles: ffffffff97120d85 put_prev_entity+0x45 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) [root@five ~]# perf script | head perf 442394 [000] 7600.157861: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 7600.157864: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 7600.157866: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 7600.157867: 128 cycles: ffffffff972415a1 perf_event_update_userpage+0x1 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [000] 7600.157870: 2597 cycles: ffffffff97463785 cap_task_setscheduler+0x5 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 7600.157897: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 7600.157900: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 7600.157901: 16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 7600.157903: 224 cycles: ffffffff9700a53a perf_ibs_handle_irq+0x1da (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) perf 442394 [001] 7600.157906: 4439 cycles: ffffffff97120d85 put_prev_entity+0x45 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux) [root@five ~]# Andi suggested we better implement it as a new field, i.e. -F deltatime, like: [root@five ~]# perf script -F deltatime Invalid field requested. Usage: perf script [<options>] or: perf script [<options>] record <script> [<record-options>] <command> or: perf script [<options>] report <script> [script-args] or: perf script [<options>] <script> [<record-options>] <command> or: perf script [<options>] <top-script> [script-args] -F, --fields <str> comma separated output fields prepend with 'type:'. +field to add and -field to remove.Valid types: hw,sw,trace,raw,synth. Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,srcline,period,iregs,uregs,brstack,brstacksym,flags,bpf-output,brstackinsn,brstackoff,callindent,insn,insnlen,synth,phys_addr,metric,misc,ipc [root@five ~]# I.e. we have -F for maximum flexibility: [root@five ~]# perf script -F comm,pid,cpu,time | head perf 442394 [000] 7600.157861: perf 442394 [000] 7600.157864: perf 442394 [000] 7600.157866: perf 442394 [000] 7600.157867: perf 442394 [000] 7600.157870: perf 442394 [001] 7600.157897: perf 442394 [001] 7600.157900: perf 442394 [001] 7600.157901: perf 442394 [001] 7600.157903: perf 442394 [001] 7600.157906: [root@five ~]# But since we already have --reltime, having --deltatime, documented one after the other is sensible. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20200204173709.489161-1-hagen@jauu.net [ Added 'perf script' man page entry for --deltatime ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-27perf test x86: Add CET instructions to the new instructions testAdrian Hunter
Add to the "x86 instruction decoder - new instructions" test the following instructions: incsspd incsspq rdsspd rdsspq saveprevssp rstorssp wrssd wrssq wrussd wrussq setssbsy clrssbsy endbr32 endbr64 And the "notrack" prefix for indirect calls and jumps. For information about the instructions, refer Intel Control-flow Enforcement Technology Specification May 2019 (334525-003). Committer testing: $ perf test instr 67: x86 instruction decoder - new instructions : Ok $ Then use verbose mode and check one of those new instructions: $ perf test -v instr |& grep saveprevssp Decoded ok: f3 0f 01 ea saveprevssp Decoded ok: f3 0f 01 ea saveprevssp $ Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi v. Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20200204171425.28073-3-yu-cheng.yu@intel.com Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-27x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode mapYu-cheng Yu
Add the following CET instructions to the opcode map: INCSSP: Increment Shadow Stack pointer (SSP). RDSSP: Read SSP into a GPR. SAVEPREVSSP: Use "previous ssp" token at top of current Shadow Stack (SHSTK) to create a "restore token" on the previous (outgoing) SHSTK. RSTORSSP: Restore from a "restore token" to SSP. WRSS: Write to kernel-mode SHSTK (kernel-mode instruction). WRUSS: Write to user-mode SHSTK (kernel-mode instruction). SETSSBSY: Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the token busy, and set then Shadow Stack pointer(SSP) to the value of MSR_IA32_PL0_SSP. CLRSSBSY: Verify the "supervisor token" and clear its busy bit. ENDBR64/ENDBR32: Mark a valid 64/32 bit control transfer endpoint. Detailed information of CET instructions can be found in Intel Software Developer's Manual. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi v. Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20200204171425.28073-2-yu-cheng.yu@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-27Merge tag 'scmi-updates-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers ARM SCMI/SCPI updates for v5.7 1. Abstraction of the scmi transport type from the core protocol driver which enables addition of other transports like SMC/HVC, SPCI and virtio apart from the existing mailbox 2. Miscellaneous fix for minor formatting issues with the kernel-doc style comments 3. Replacement of zero-length array with flexible-array member which is part of tree-wide cleanup * tag 'scmi-updates-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: misc: vexpress: Replace zero-length array with flexible-array member firmware: arm_scpi: Replace zero-length array with flexible-array member firmware: arm_scmi/perf: Replace zero-length array with flexible-array member firmware: arm_scmi: Replace zero-length array with flexible-array member firmware: arm_scmi: Make scmi core independent of the transport type firmware: arm_scmi: Move macros and helpers to common.h firmware: arm_scmi: Update doc style comments Link: https://lore.kernel.org/r/20200304175247.GA5402@bogus Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-27Merge tag 'tee-cleanup-for-5.7' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Cleanup shared memory handing in TEE subsystem The highlights are: - Removing redundant or unused fields in struct tee_shm - Only assign userspace shm IDs for shared memory objects originating from user space * tag 'tee-cleanup-for-5.7' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: tee_shm_op_mmap(): use TEE_SHM_USER_MAPPED tee: remove redundant teedev in struct tee_shm tee: don't assign shm id for private shms tee: remove unused tee_shm_priv_alloc() tee: remove linked list of struct tee_shm Link: https://lore.kernel.org/r/20200228140925.GA12393@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-27Merge tag 'soc-fsl-next-v5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.7 DPAA2 DPIO driver performance optimization - Add and use QMAN multiple enqueue interface - Use function pointer indirection to replace checks in hotpath QUICC Engine drivers - Fix sparse warnings and exposed endian issues * tag 'soc-fsl-next-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: qe: fix sparse warnings for ucc_slow.c soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure soc: fsl: qe: fix sparse warnings for ucc_fast.c soc: fsl: qe: fix sparse warnings for qe_ic.c soc: fsl: qe: fix sparse warnings for ucc.c soc: fsl: qe: fix sparse warning for qe_common.c soc: fsl: qe: fix sparse warnings for qe.c soc: fsl: dpio: fix dereference of pointer p before null check soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue soc: fsl: dpio: QMAN performance improvement with function pointer indirection soc: fsl: dpio: Adding QMAN multiple enqueue interface Link: https://lore.kernel.org/r/20200326001257.22696-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-27ARM: mmp: replace setup_irq() by request_irq()afzal mohammed
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Link: https://lore.kernel.org/r/20200327124437.4239-1-afzal.mohd.ma@gmail.com Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>