| Age | Commit message (Collapse) | Author |
|---|
|
Add necessary function definitions to compute AS SDP data.
The new intel_dp_compute_as_sdp function computes AS SDP
values based on the display configuration, ensuring proper
handling of Variable Refresh Rate (VRR).
--v2:
- Added DP_SDP_ADAPTIVE_SYNC to infoframe_type_to_idx(). [Ankit]
- Separated patch for intel_read/write_dp_sdp. [Ankit]
- _HSW_VIDEO_DIP_ASYNC_DATA_A should be from ADL onward. [Ankit]
- Fixed indentation issues. [Ankit]
--v3:
- Added VIDEO_DIP_ENABLE_AS_HSW flag to intel_dp_set_infoframes.
--v4:
- Added HAS_VRR check before writing AS SDP.
--v5:
Added missed HAS_VRR check before reading AS SDP.
--v6:
- Used Adaptive Sync sink status as a check for read/write SDP. (Ankit)
--v7:
- Remove as_sdp_enable from crtc_state.
- Add a comment mentioning current support of
DP_AS_SDP_AVT_FIXED_VTOTAL.
- Add state checker for AS_SDP infoframe enable.
--v8:
- Drop conn_state from intel_dp_compute_as_sdp, as not used.
- Remove fullstop in subject line.
--v9:
- Add vrr.enable instead of is_in_vrr_range.
--v10:
- remove vrefresh and connector, as they are no longer required.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-7-mitulkumar.ajitkumar.golani@intel.com
|
|
Add a wrapper function to check if both the source and
sink support Adaptive Sync SDP.
--v1:
Just use drm/i915/dp in subject line.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-6-mitulkumar.ajitkumar.golani@intel.com
|
|
Add the necessary structures and functions to handle reading and
unpacking Adaptive Sync Secondary Data Packets. Also add support
to write and pack AS SDP.
--v2:
- Correct use of REG_BIT and REG_GENMASK. [Jani]
- Use as_sdp instead of async. [Jani]
- Remove unrelated comments and changes. [Jani]
- Correct code indent. [Jani]
--v3:
- Update definition names for AS SDP which are starting from
HSW, as these defines are applicable for ADLP+.(Ankit)
--v4:
- Remove as_sdp_mode from crtc_state.
- Drop metadata keyword.
- For consistency, update ADL_ prefix or post fix as required.
--v5:
- Check if AS_SDP bit is set in crtc_state->infoframes.enable. If not
return.
- Check for HAS_AS_SDP() before setting VIDEO_DIP_ENABLE_AS_ADL mask.
--v6:
- Rename intel_read_dp_infoframe_as_sdp to intel_read_dp_as_sdp.
--v7:
- Add read back for length and vtotal correction.
--v8:
- Use as_sdp->target_rr & 0xFF.
- Shift by 8 instead of 32, and drop casting to u64.
- Remove changes which are does not belong to this patch.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-5-mitulkumar.ajitkumar.golani@intel.com
|
|
Add crtc state dump for Adaptive Sync SDP to know which
crtc specifically caused the failure.
--v1:
- Rebase Patches to latest.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-4-mitulkumar.ajitkumar.golani@intel.com
|
|
Add structure representing Adaptive Sync Secondary Data Packet (AS SDP).
Also, add Adaptive Sync SDP logging in drm_dp_helper.c to facilitate
debugging.
--v2:
- Update logging. [Jani, Ankit]
- Use 'as_sdp' instead of 'async' [Ankit]
- Correct define placeholders to where they are actually used. [Jani]
- Update members in 'as_sdp' structure to make it uniform. [Jani]
--v3:
- Added changes to dri-devel mailing list. No code changes.
--v4:
- Instead of directly using operation mode, use an enum to accommodate
all operation modes (Ankit).
--v5:
Nit-pick changes to commit message.
--v6:
- Add correct place holder and name change for AS_SDP_OP_MODE.
- Separate i915 changes from drm changes.
- Remove extra lines.
--v7:
- Add drm/dp in subject line (Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-3-mitulkumar.ajitkumar.golani@intel.com
|
|
Add an API that indicates support for Adaptive Sync SDP in
the sink, which can be utilized by the rest of the DP programming.
--v1:
- Format commit message properly.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-2-mitulkumar.ajitkumar.golani@intel.com
|
|
There is no reason to make this debugfs file for a simple
boolean so complicated. Just use debugfs_create_bool().
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-8-ville.syrjala@linux.intel.com
|
|
ICL supposedly doesn't support FEC on MST. Reject it.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-7-ville.syrjala@linux.intel.com
|
|
The MST code currently assumes that glk+ already supports MST+DSC,
which is incorrect. We need to check for TGL+ actually. ICL does
support SST+DSC, but supposedly it can't do MST+FEC which will
also rule out MST+DSC.
Note that a straight TGL+ check doesn't work here because DSC
support can get fused out, so we do need to also check 'has_dsc'.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-6-ville.syrjala@linux.intel.com
|
|
Simplify our life by extracting the "do we need the glk scaler
clock gating w/a?" check into a small helper.
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-5-ville.syrjala@linux.intel.com
|
|
glk_pipe_scaler_clock_gating_wa() is messy. Clean it up via
intel_de_rmw(), and also just pass in the whole crtc so the
caller doesn't have to dance around so much.
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-4-ville.syrjala@linux.intel.com
|
|
Move some of the more trivial checks in the DP .mode_valid()
hooks upwards to lessen the noise amongst the more complex
checks.
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-3-ville.syrjala@linux.intel.com
|
|
We never set connector->doublescan_allowed, so the probe helper
already filters out all doublescan modes for us.
Sadly we still need to keep the explicit doublescan checks
in .compute_config as outlined in commit e4dd27aadd20
("drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI")
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-2-ville.syrjala@linux.intel.com
|
|
The kernel doc says this function returns either a valid pointer
or an ERR_PTR(), but in practice this function can return NULL if
create=false. Fix the function to match the doc (return
ERR_PTR(-ENOENT) instead of NULL) and adjust all call-sites
accordingly.
Fixes: 4bdca1150792 ("drm/panthor: Add the driver frontend block")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402141412.1707949-1-harshit.m.mogalapalli@oracle.com
|
|
The devm_drm_dev_alloc() function returns error pointers.
Update the error handling to check for error pointers instead of NULL.
Fixes: 4bdca1150792 ("drm/panthor: Add the driver frontend block")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104041.1689951-1-harshit.m.mogalapalli@oracle.com
|
|
The ->iface.streams[csg_slot][] array has MAX_CS_PER_CSG elements so
this > comparison needs to be >= to prevent an out of bounds access.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62835c16-c85c-483d-a8fe-63be78d49d15@moroto.mountain
|
|
This code accidentally returns zero/success on error because of a typo.
It should be "irq" instead of "ret". The other thing is that if
platform_get_irq_byname() were to return zero then the error code would
be cmplicated. Fortunately, it does not so we can just change <= to
< 0.
Fixes: 5cd894e258c4 ("drm/panthor: Add the GPU logical block")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d753e684-43ee-45c2-a1fd-86222da204e1@moroto.mountain
|
|
These error paths forgot to set the error code to -ENOMEM.
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf5bbba5-427e-4940-b91e-925f9fa71f8d@moroto.mountain
|
|
When compiling with W=1 the build process will flag empty comments,
misnamed documented variables and incorrect tagging of functions.
Fix them in one go.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402215423.360341-2-liviu.dudau@arm.com
|
|
Commit 962f88b9c916 ("drm/panthor: Drop the dev_enter/exit() sections in
_irq_suspend/resume()") removed the code that used the 'cookie' variable
but left the declaration in place. Remove it.
Fixes: 962f88b9c916 ("drm/panthor: Drop the dev_enter/exit() sections in _irq_suspend/resume()")
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402215423.360341-1-liviu.dudau@arm.com
|
|
This reverts commit 0d82a0d6f5561af8dea7011d1b7cae510021723e.
The commit failed to take into account that the parameter duplication
and debugfs for char * parameters were subtly different between i915
core and display, and caused the DMC and PM to be disabled. Moreover,
the patch was pushed with failing CI results. Revert, and get back to
the drawing board.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Catching up on 6.9-rc2
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
No need to write ALPM configuration for DP2.0 Panel Replay or PSR1.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-6-jouni.hogander@intel.com
|
|
Enable ALPM AUX-Less on source side for Panel Replay eDP. Also write all
calculated AUX-Less configuration values accordingly. Enabling it on sink
side is in upcoming patch.
Bspec: 71477
v5:
- mention enable is only on source side in commit message
v4:
- add comment explaining why AUX less is enabled on eDP panel replay
without any extra checks
v3:
- do not use alpm_ctl as uninitialized variable
v2:
- do not set AUX-Wake related bits for AUX-Less case
- drop switch to active latency
- add SLEEP_HOLD_TIME_50_SYMBOLS
- add PORT_ALPM_CTL_MAX_PHY_SWING_HOLD
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-5-jouni.hogander@intel.com
|
|
Add get function for silence period and lfps half cycle. Values are taken
from the tables in bspec.
Bspec: 71632
v3:
- use PORT_ALPM_CTL_SILENCE_PERIOD_MASK instead of value 255
- use PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION_MASK instead of
value 31
v2:
- fix some checks
- add some more comments
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-4-jouni.hogander@intel.com
|
|
Calculate aux less wake time and store it into alpm_params struct
Bspec: 71477
v4:
- re-use fast_wake_lines to store aux_less_wake_lines
v3:
- use ALPM_CTL_AUX_LESS_WAKE_TIME_MASK instead of value 63
v2:
- use variables instead of values directly
- fix max value
- move converting port clock to Mhz into _lnl_compute_aux_less_wake_time
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-3-jouni.hogander@intel.com
|
|
Couple of ALPM AUX-Less related fields are missing from ALPM register
definitions. Add these and remove some duplicate definitions.
Bspec: 70294
V2: add Bspec reference
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-2-jouni.hogander@intel.com
|
|
Automatically clean up the conncetor-poll thread as part of the DRM
device release. The new helper drmm_kms_helper_poll_init() provides
a shared implementation for all drivers.
v6:
- fix kernel doc comment (Sui, kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-14-tzimmermann@suse.de
|
|
Implement polling for VGA and SIL164 connectors. Set the flag
DRM_CONNECTOR_POLL_DISCONNECT for each to detect the removal of the
monitor cable. Implement struct drm_connector_helper_funcs.detect_ctx
for each type of connector by testing for EDID data.
The helper drm_connector_helper_detect_ctx() implements .detect_ctx()
on top of the connector's DDC channel. The function can be used by
other drivers as companion to drm_connector_helper_get_modes().
v6:
- change helper name to drm_connector_helper_detec_from_ddc()
(Maxime, Sui)
v5:
- share implementation in drm_connector_helper_detect_ctx() (Maxime)
- test for DDC presence with drm_probe_ddc() (Maxime, Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-13-tzimmermann@suse.de
|
|
The .get_modes() code for VGA and SIL164 connectors does not depend
on either type of connector. Replace the driver code with the common
helper drm_connector_helper_get_modes(). It reads EDID data via
DDC and updates the connector's EDID property.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-12-tzimmermann@suse.de
|
|
The modeset lock protects the DDC code from concurrent modeset
operations, which use the same registers. Move that code from the
connector helpers into the DDC helpers .pre_xfer() and .post_xfer().
Both, .pre_xfer() and .post_xfer(), enclose the transfer of data blocks
over the I2C channel in the internal I2C function bit_xfer(). Both
calls are executed unconditionally if present. Invoking DDC transfers
from any where within the driver now takes the lock.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-11-tzimmermann@suse.de
|
|
Align the names of the algo-bit helpers with ast's convention of
using an ast prefix plus the struct's name plus the callback's name
for such function symbols. Change the parameter names of these
helpers to 'data' and 'state', as used in the declaration of struct
i2c_algo_bit_data. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-10-tzimmermann@suse.de
|
|
The DDC code needs the AST device. Store a pointer in struct ast_ddc
and avoid internal upcasts. Improves type safety within the DDC code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-9-tzimmermann@suse.de
|
|
The DDC code needs the AST device. Pass it to ast_ddc_create() and
avoid an internal upcast. Improves type safety within the DDC code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-8-tzimmermann@suse.de
|
|
The struct struct ast_i2c_chan represents the Display Data Channel
(DDC); I2C is the underlying bus. Rename the structure, the variables
and the helper ast_i2c_create() to ddc-like terms. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-7-tzimmermann@suse.de
|
|
Rename ast_i2c.c to ast_ddc.c and move its interface into the
new header ast_ddc.h. Update all include statements as necessary
and change the adapter name to 'AST DDC bus'.
This avoids including I2C headers in the driver's main header file,
which doesn't need them. Renaming files to _ddc indicates that the
code is about the DDC. I2C is really just the underlying bus here.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-6-tzimmermann@suse.de
|
|
Replace kzalloc() with drmm_kzalloc() and thereby put the release of
the I2C instance into a separate action. Avoids explicit error roll-
back in ast_i2c_chan_create(). No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-5-tzimmermann@suse.de
|
|
Both, struct ast_vga_connector and struct ast_sil164_connector, are
now wrappers around struct drm_connector. Remove them.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-4-tzimmermann@suse.de
|
|
Expect the hardware to provide a DDC channel. Fail probing if its
initialization fails. Failing to initialize the DDC indicates a
larger problem, so there's no point in continuing.
v4:
* give a rational in the commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-3-tzimmermann@suse.de
|
|
Include <linux/of.h> to get of_property_read_u32() in the source
files that need it. Avoids the proxy include via <linux/i2c.h>.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-2-tzimmermann@suse.de
|
|
The dmc_firmware_path parameter is clearly a display parameter. Move it
there so it's available to both i915 and xe modules. This also cleans up
the ugly member in struct xe_device.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321161856.3517856-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use localized __diag_push(), __diag_ignore_all() with rationale, and
__diag_pop() for specific initializations instead of blanket disabling
of -Woverride-init across several files.
Note that we've tried this before with commit 88e9664434c9 ("drm/i915:
use localized __diag_ignore_all() instead of per file") and reverted in
commit 290d16104575 ("Revert "drm/i915: use localized
__diag_ignore_all() instead of per file""). The issue turned out to be
in __diag_ignore_all() and it was fixed by commit 689b097a06ba
("compiler-gcc: Suppress -Wmissing-prototypes warning for all supported
GCC"). So we should be able to pull this off now.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102455.944131-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Backmerging to get v6.9-rc2 changes into drm-misc-next.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Clang warns (or errors with CONFIG_WERROR):
drivers/gpu/drm/panthor/panthor_sched.c:2048:6: error: variable 'csg_mod_mask' set but not used [-Werror,-Wunused-but-set-variable]
2048 | u32 csg_mod_mask = 0, free_csg_slots = 0;
| ^
1 error generated.
The variable is an artifact left over from refactoring that occurred
during the development of the initial series for this driver. Remove it
to resolve the warning.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328-panthor-drop-csg_mod_mask-v1-1-5a80be3df581@kernel.org
|
|
There's no reason for _irq_suspend/resume() to be called after the
device has been unplugged, and keeping this dev_enter/exit()
section in _irq_suspend() is turns _irq_suspend() into a NOP
when called from the _unplug() functions, which we don't want.
v3:
- New patch
Fixes: 5fe909cae118 ("drm/panthor: Add the device logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326111205.510019-3-boris.brezillon@collabora.com
|
|
Make sure we set suspended=true last to avoid generating an irq storm
in the unlikely case where an IRQ happens between the suspended=true
assignment and the _INT_MASK update.
We also move the mask=0 assignment before writing to the _INT_MASK
register to prevent the thread handler from unmasking the interrupt
behind our back. This means we might lose events if there were some
pending when we get to suspend the IRQ, but that's fine.
The synchronize_irq() we have in the _irq_suspend() path was not
there to make sure all IRQs are processed, just to make sure we don't
have registers accesses coming from the irq handlers after
_irq_suspend() has been called. If there's a need to have all pending
IRQs processed, it should happen before _irq_suspend() is called.
v3:
- Add Steve's R-b
v2:
- New patch
Fixes: 5fe909cae118 ("drm/panthor: Add the device logical block")
Reported-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326111205.510019-2-boris.brezillon@collabora.com
|
|
When mapping an IO region, the pseudo-file offset is dependent on the
userspace architecture. panthor_device_mmio_offset() abstracts that
away for us by turning a userspace MMIO offset into its kernel
equivalent, but we were not updating vm_area_struct::vm_pgoff
accordingly, leading us to attach the MMIO region to the wrong file
offset.
This has implications when we start mixing 64 bit and 32 bit apps, but
that's only really a problem when we start having more that 2^43 bytes of
memory allocated, which is very unlikely to happen.
What's more problematic is the fact this turns our
unmap_mapping_range(DRM_PANTHOR_USER_MMIO_OFFSET) calls, which are
supposed to kill the MMIO mapping when entering suspend, into NOPs.
Which means we either keep the dummy flush_id mapping active at all
times, or we risk a BUS_FAULT if the MMIO region was mapped, and the
GPU is suspended after that.
Solve that by patching vm_pgoff early in panthor_mmap(). With
this in place, we no longer need the panthor_device_mmio_offset()
helper.
v3:
- No changes
v2:
- Kill panthor_device_mmio_offset()
Fixes: 5fe909cae118 ("drm/panthor: Add the device logical block")
Reported-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/10835
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326111205.510019-1-boris.brezillon@collabora.com
|
|
For DISPLAY < 13, compressed bpp is chosen from a list of
supported compressed bpps. Fix the condition to choose the
appropriate compressed bpp from the list.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10162
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305054443.2489895-1-ankit.k.nautiyal@intel.com
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
|
