summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-07libceph: compute actual pgid in ceph_pg_to_up_acting_osds()Ilya Dryomov
Move raw_pg_to_pg() call out of get_temp_osds() and into ceph_pg_to_up_acting_osds(), for upcoming apply_upmap(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: pg_upmap[_items] infrastructureIlya Dryomov
pg_temp and pg_upmap encodings are the same (PG -> array of osds), except for the incremental remove: it's an empty mapping in new_pg_temp for pg_temp and a separate old_pg_upmap set for pg_upmap. (This isn't to allow for empty pg_upmap mappings -- apparently, pg_temp just wasn't looked at as an example for pg_upmap encoding.) Reuse __decode_pg_temp() for decoding pg_upmap and new_pg_upmap. __decode_pg_temp() stores into pg_temp union member, but since pg_upmap union member is identical, reading through pg_upmap later is OK. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: ceph_decode_skip_* helpersIlya Dryomov
Some of these won't be as efficient as they could be (e.g. ceph_decode_skip_set(... 32 ...) could advance by len * sizeof(u32) once instead of advancing by sizeof(u32) len times), but that's fine and not worth a bunch of extra macro code. Replace skip_name_map() with ceph_decode_skip_map as an example. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: kill __{insert,lookup,remove}_pg_mapping()Ilya Dryomov
Switch to DEFINE_RB_FUNCS2-generated {insert,lookup,erase}_pg_mapping(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: introduce and switch to decode_pg_mapping()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: don't pass pgid by valueIlya Dryomov
Make __{lookup,remove}_pg_mapping() look like their ceph_spg_mapping counterparts: take const struct ceph_pg *. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: respect RADOS_BACKOFF backoffsIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: make DEFINE_RB_* helpers more generalIlya Dryomov
Initially for ceph_pg_mapping, ceph_spg_mapping and ceph_hobject_id, compared with ceph_pg_compare(), ceph_spg_compare() and hoid_compare() respectively. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: avoid unnecessary pi lookups in calc_target()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: use target pi for calc_target() calculationsIlya Dryomov
For luminous and beyond we are encoding the actual spgid, which requires operating with the correct pg_num, i.e. that of the target pool. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: always populate t->target_{oid,oloc} in calc_target()Ilya Dryomov
need_check_tiering logic doesn't make a whole lot of sense. Drop it and apply tiering unconditionally on every calc_target() call instead. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: make sure need_resend targets reflect latest mapIlya Dryomov
Otherwise we may miss events like PG splits, pool deletions, etc when we get multiple incremental maps at once. Because check_pool_dne() can now be fed an unlinked request, finish_request() needed to be taught to handle unlinked requests. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: delete from need_resend_linger before check_linger_pool_dne()Ilya Dryomov
When processing a map update consisting of multiple incrementals, we may end up running check_linger_pool_dne() on a lingering request that was previously added to need_resend_linger list. If it is concluded that the target pool doesn't exist, the request is killed off while still on need_resend_linger list, which leads to a crash on a NULL lreq->osd in kick_requests(): libceph: linger_id 18446462598732840961 pool does not exist BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: ceph_osdc_handle_map+0x4ae/0x870 Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: resend on PG splits if OSD has RESEND_ON_SPLITIlya Dryomov
Note that ceph_osd_request_target fields are updated regardless of RESEND_ON_SPLIT. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: drop need_resend from calc_target()Ilya Dryomov
Replace it with more fine-grained bools to separate updating ceph_osd_request_target fields and the decision to resend. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: MOSDOp v8 encoding (actual spgid + full hash)Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: ceph_connection_operations::reencode_message() methodIlya Dryomov
Give upper layers a chance to reencode the message after the connection is negotiated and ->peer_features is set. OSD client will use this to support both luminous and pre-luminous OSDs (in a single cluster): the former need MOSDOp v8; the latter will continue to be sent MOSDOp v4. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: encode_{pgid,oloc}() helpersIlya Dryomov
Factor out encode_{pgid,oloc}() and use ceph_encode_string() for oid. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: introduce ceph_spg, ceph_pg_to_primary_shard()Ilya Dryomov
Store both raw pgid and actual spgid in ceph_osd_request_target. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: new pi->last_force_request_resendIlya Dryomov
The old (v15) pi->last_force_request_resend has been repurposed to make pre-RESEND_ON_SPLIT clients that don't check for PG splits but do obey pi->last_force_request_resend resend on splits. See ceph.git commit 189ca7ec6420 ("mon/OSDMonitor: make pre-luminous clients resend ops on split"). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: fold [l]req->last_force_resend into ceph_osd_request_targetIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: support SERVER_JEWEL feature bitsIlya Dryomov
Only MON_STATEFUL_SUB, really. MON_ROUTE_OSDMAP and OSDSUBOP_NO_SNAPCONTEXT are irrelevant. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: advertise support for OSD_POOLRESENDIlya Dryomov
The code has been in place since commit 63244fa123a7 ("libceph: introduce ceph_osd_request_target, calc_target()"), and, with the ceph_{oloc,oid}_copy() issue fixed in the previous commit, is now in working order. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: handle non-empty dest in ceph_{oloc,oid}_copy()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: new features macrosIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: remove ceph_sanitize_features() workaroundIlya Dryomov
Reflects ceph.git commit ff1959282826ae6acd7134e1b1ede74ffd1cc04a. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: update ceph_dentry_info::lease_session when necessaryYan, Zheng
Current code does not update ceph_dentry_info::lease_session once it is set. If auth mds of corresponding dentry changes, dentry lease keeps in an invalid state. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: new mount option that specifies fscache uniquifierYan, Zheng
Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: avoid accessing freeing inode in ceph_check_delayed_caps()Yan, Zheng
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: avoid invalid memory dereference in the middle of umountYan, Zheng
extra_mon_dispatch() and debugfs' foo_show functions dereference fsc->mdsc. we should clean up fsc->client->extra_mon_dispatch and debugfs before destroying fsc->mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: getattr before read on ceph.* xattrsYan, Zheng
Previously we were returning values for quota, layout xattrs without any kind of update -- the user just got whatever happened to be in our cache. Clearly this extra round trip has a cost, but reads of these xattrs are fairly rare, happening on admin intervention rather than in normal operation. Link: http://tracker.ceph.com/issues/17939 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: don't re-send interrupted flock requestYan, Zheng
Don't re-send interrupted flock request in cases of mds failover and receiving request forward. Because corresponding 'lock intr' request may have been finished, it won't get re-sent. Link: http://tracker.ceph.com/issues/20170 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: cleanup writepage_nounlock()Yan, Zheng
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: redirty page when writepage_nounlock() skips unwritable pageYan, Zheng
Ceph needs to flush dirty page in the order in which in which snap context they belong to. Dirty pages belong to older snap context should be flushed earlier. if writepage_nounlock() can not flush a page, it should redirty the page. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: remove useless page->mapping check in writepage_nounlock()Yan, Zheng
Callers of writepage_nounlock() have already ensured non-null page->mapping. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: update the 'approaching max_size' codeYan, Zheng
The old 'approaching max_size' code expects MDS set max_size to '2 * reported_size'. This is no longer true. The new code reports file size when half of previous max_size increment has been used. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: re-request max size after importing capsYan, Zheng
The 'wanted max size' could be sent to inode's old auth mds, re-send it to inode's new auth mds if necessary. Otherwise write syscall may hang. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07drm/radeon: Fix eDP for single-display iMac10,1 (v2)Mario Kleiner
The late 2009, 27 inch Apple iMac10,1 has an internal eDP display and an external Mini- Displayport output, driven by a DCE-3.2, RV730 Radeon Mobility HD-4670. The machine worked fine in a dual-display setup with eDP panel + externally connected HDMI or DVI-D digital display sink, connected via MiniDP to DVI or HDMI adapter. However, booting the machine single-display with only eDP panel results in a completely black display - even backlight powering off, as soon as the radeon modesetting driver loads. This patch fixes the single dispay eDP case by assigning encoders based on dig->linkb, similar to DCE-4+. While this should not be generally necessary (Alex: "...atom on normal boards should be able to handle any mapping."), Apple seems to use some special routing here. One remaining problem not solved by this patch is that an external Minidisplayport->DP sink does still not work on iMac10,1, whereas external DVI and HDMI sinks continue to work. The problem affects at least all tested kernels since Linux 3.13 - didn't test earlier kernels, so backporting to stable probably makes sense. v2: With the original patch from 2016, Alex was worried it will break other DCE3.2 systems. Use dmi_match() to apply this special encoder assignment only for the Apple iMac 10,1 from late 2009. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-07ALSA: msnd: Optimize / harden DSP and MIDI loopsTakashi Iwai
The ISA msnd drivers have loops fetching the ring-buffer head, tail and size values inside the loops. Such codes are inefficient and fragile. This patch optimizes it, and also adds the sanity check to avoid the endless loops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196131 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196133 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-07KVM: mark memory slots as rcuChristian Borntraeger
we access the memslots array via srcu. Mark it as such and use the right access functions also for the freeing of memory slots. Found by sparse: ./include/linux/kvm_host.h:565:16: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-07KVM: mark kvm->busses as rcu protectedChristian Borntraeger
mark kvm->busses as rcu protected and use the correct access function everywhere. found by sparse virt/kvm/kvm_main.c:3490:15: error: incompatible types in comparison expression (different address spaces) virt/kvm/kvm_main.c:3509:15: error: incompatible types in comparison expression (different address spaces) virt/kvm/kvm_main.c:3561:15: error: incompatible types in comparison expression (different address spaces) virt/kvm/kvm_main.c:3644:15: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-07KVM: use rcu access function for irq routingChristian Borntraeger
irq routing is rcu protected. Use the proper access functions. Found by sparse virt/kvm/irqchip.c:233:13: warning: incorrect type in assignment (different address spaces) virt/kvm/irqchip.c:233:13: expected struct kvm_irq_routing_table *old virt/kvm/irqchip.c:233:13: got struct kvm_irq_routing_table [noderef] <asn:4>*irq_routing Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-07tracing: Attempt to record other information even if some failJoel Fernandes
In recent patches where we record comm and tgid at the same time, we skip continuing to record if any fail. Fix that by trying to record as many things as we can even if some couldn't be recorded. If any information isn't recorded, then we don't set trace_taskinfo_save as before. Link: http://lkml.kernel.org/r/20170706230023.17942-3-joelaf@google.com Cc: kernel-team@android.com Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Joel Fernandes <joelaf@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-07-07tracing: Treat recording tgid for idle task as a successJoel Fernandes
Currently we stop recording tgid for non-idle tasks when switching from/to idle task since we treat that as a record failure. Fix that by treat recording of tgid for idle task as a success. Link: http://lkml.kernel.org/r/20170706230023.17942-2-joelaf@google.com Cc: kernel-team@android.com Cc: Ingo Molnar <mingo@redhat.com> Reported-by: Michael Sartain <mikesart@gmail.com> Signed-off-by: Joel Fernandes <joelaf@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-07-07tracing: Treat recording comm for idle task as a successJoel Fernandes
Currently we stop recording comm for non-idle tasks when switching from/to idle task since we treat that as a record failure. Fix that by treat recording of comm for idle task as a success. Link: http://lkml.kernel.org/r/20170706230023.17942-1-joelaf@google.com Cc: kernel-team@android.com Cc: Ingo Molnar <mingo@redhat.com> Reported-by: Michael Sartain <mikesart@gmail.com> Signed-off-by: Joel Fernandes <joelaf@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-07-07rtc: ds1307: remove ds1307_removeAlexandre Belloni
ds1307_remove() is now empty, remove it Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: ds1307: use generic nvmemAlexandre Belloni
Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: ds1307: switch to rtc_register_deviceAlexandre Belloni
This removes a possible race condition and crash and allows for further improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: rv8803: remove rv8803_removeAlexandre Belloni
rv8803_remove() is now empty, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: rv8803: use generic nvmem supportAlexandre Belloni
Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit (git 2.34.1) at 2025-09-13 19:59:33 +0000