| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 74e1006430a5377228e49310f6d915628609929e.
This causes a regression in the workload selection.
A more extensive fix is being worked on.
For now, revert.
This came back after a merge in 6.13-rc1, so revert again.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Fixes: 74e1006430a5 ("drm/amd/pm: correct the workload setting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 44f392fbf628a7ff2d8bb8e83ca1851261f81a6f)
|
|
Use found block to call correct init/resume function on the block.
Set status.hw for resume and init.
Print re-init result again. Change to use dev_info.
Use amdgpu_device_ip_get_ip_block to get target block instead of
loop.
Fixes: 502d76308d45 ("drm/amdgpu: validate resume before function call")
Signed-off-by: Yiqing Yao <YiQing.Yao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ISP hw_init is not called with the recent changes related
to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring
the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using
incorrect max number of IP blocks.
Update AMDGPU_IP_BLK_MASK_ALL to use AMDGPU_MAX_IP_NUM
instead of (AMDGPU_MAX_IP_NUM - 1) to fix the issue.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 14f2fe34f5c6 ("drm/amdgpu: Add init levels")
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some DSC timing failed at bandwidth validation due to hactive
can't be evenly divided on each ODM segment.
[HOW]
Borrow from hblank to increase hactive to support these timing.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The minimum value of the dst_y_prefetch_equ was not correct
in prefetch calculation whice causes OPTC underflow.
[HOW]
Add the min operation of dst_y_prefetch_equ in prefetch calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
For better power profiling knowing the detile
buffer size at a given point in time
would be useful.
[HOW]
Add interface to retrieve detile buffer from
dc state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Cacheline size is not available in IP discovery for gc943,gc944.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add MEC version from which alternate support for no PCIe atomics
is provided so that device is not skipped during KFD device init in
GFX1200/GFX1201.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
commit 38077562e059 ("drm/amd/display: Implement new
backlight_level_params structure") adjusted DC core to require
the backlight type to be programmed in the dc link when changing
brightness. This isn't initialized in amdgpu_dm for OLED panels
though which broke brightness.
Explicitly initialize when aux support is enabled.
Reported-and-tested-by: Luke Jones <luke@ljones.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792
Fixes: 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using
it is causing corruption. It's got illogical values of not specifying
a digital interface. Sanity check the ACPI EDID to avoid tripping such
problems.
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782
Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When XSTATE_BV[i] is 0, and XRSTOR attempts to restore state component
'i' it ignores any value in the XSAVE buffer and instead restores the
state component's init value.
This means that if XSAVE writes XSTATE_BV[PKRU]=0 then XRSTOR will
ignore the value that update_pkru_in_sigframe() writes to the XSAVE buffer.
XSTATE_BV[PKRU] only gets written as 0 if PKRU is in its init state. On
Intel CPUs, basically never happens because the kernel usually
overwrites the init value (aside: this is why we didn't notice this bug
until now). But on AMD, the init tracker is more aggressive and will
track PKRU as being in its init state upon any wrpkru(0x0).
Unfortunately, sig_prepare_pkru() does just that: wrpkru(0x0).
This writes XSTATE_BV[PKRU]=0 which makes XRSTOR ignore the PKRU value
in the sigframe.
To fix this, always overwrite the sigframe XSTATE_BV with a value that
has XSTATE_BV[PKRU]==1. This ensures that XRSTOR will not ignore what
update_pkru_in_sigframe() wrote.
The problematic sequence of events is something like this:
Userspace does:
* wrpkru(0xffff0000) (or whatever)
* Hardware sets: XINUSE[PKRU]=1
Signal happens, kernel is entered:
* sig_prepare_pkru() => wrpkru(0x00000000)
* Hardware sets: XINUSE[PKRU]=0 (aggressive AMD init tracker)
* XSAVE writes most of XSAVE buffer, including
XSTATE_BV[PKRU]=XINUSE[PKRU]=0
* update_pkru_in_sigframe() overwrites PKRU in XSAVE buffer
... signal handling
* XRSTOR sees XSTATE_BV[PKRU]==0, ignores just-written value
from update_pkru_in_sigframe()
Fixes: 70044df250d0 ("x86/pkeys: Update PKRU to enable all pkeys before XSAVE")
Suggested-by: Rudi Horn <rudi.horn@oracle.com>
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241119174520.3987538-3-aruna.ramakrishna%40oracle.com
|
|
update_pkru_in_sigframe() will shortly need some information which
is only available inside xsave_to_user_sigframe(). Move
update_pkru_in_sigframe() inside the other function to make it
easier to provide it that information.
No functional changes.
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241119174520.3987538-2-aruna.ramakrishna%40oracle.com
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
On VCN 1.0, VCN and JPEG use the same worker thread so cancel
the vcn worker rather than jpeg. On VCN 2.0 and newer
there are separate workers for each.
Fixes: 93df74873703 ("drm/amdgpu/jpeg: cancel the jpeg worker")
Tested-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 63dfa1004322 ("nvme: move NVME_QUIRK_DEALLOCATE_ZEROES out of
nvme_config_discard") started applying the NVME_QUIRK_DEALLOCATE_ZEROES
quirk even then the Dataset Management is not supported. It turns out
that there versions of these old Intel SSDs that have DSM support
disabled in the firmware, which will now lead to errors everytime
a Write Zeroes command is issued. Fix this by checking for DSM support
before applying the quirk.
Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Fixes: 63dfa1004322 ("nvme: move NVME_QUIRK_DEALLOCATE_ZEROES out of nvme_config_discard")
Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme_execute_identify_ns_nvm function uses ZERO_PAGE for copying
SG list with all zeros. As ZERO_PAGE would not necessarily return the
virtual-address of the zero page, we need to first convert the page
address to kernel virtual-address and then use it as source address
for copying the data to SG list with all zeros. Using return address
of ZERO_PAGE(0) as source address for copying data to SG list would
fill the target buffer with random/garbage value and causes the
undesired side effect.
As other identify implemenations uses kzalloc for allocating a zero
filled buffer, we decided use kzalloc for allocating a zero filled
buffer in nvme_execute_identify_ns_nvm function and then use this
buffer for copying all zeros to SG list buffers. So esentially, we
now avoid using ZERO_PAGE.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 64a51080eaba ("nvmet: implement id ns for nvm command set")
Link: https://lore.kernel.org/all/CAHj4cs8OVyxmn4XTvA=y4uQ3qWpdw-x3M3FSUYr-KpE-nhaFEA@mail.gmail.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull in outstanding changes from 6.13/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On the Asus X541UAK an unknown event 0xCF is emited when the charger
is plugged in. This is caused by the following AML code:
If (ACPS ())
{
ACPF = One
Local0 = 0x58
If (ATKP)
{
^^^^ATKD.IANE (0xCF)
}
}
Else
{
ACPF = Zero
Local0 = 0x57
}
Notify (AC0, 0x80) // Status Change
If (ATKP)
{
^^^^ATKD.IANE (Local0)
}
Sleep (0x64)
PNOT ()
Sleep (0x0A)
NBAT (0x80)
Ignore the 0xCF event to silence the unknown event warning.
Reported-by: Pau Espin Pedrol <pespin@espeweb.net>
Closes: https://lore.kernel.org/platform-driver-x86/54d4860b-ec9c-4992-acf6-db3f90388293@espeweb.net
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241123224700.18530-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On some machines like the ASUS Vivobook S14 writing the thermal policy
returns the currently writen thermal policy instead of an error code.
Ignore the return code to avoid falsely returning an error when the
thermal policy was written successfully.
Reported-by: auslands-kv@gmx.de
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219517
Fixes: 2daa86e78c49 ("platform/x86: asus_wmi: Support throttle thermal policy")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241124171941.29789-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Change module description from "Samsung Backlight driver" to "Samsung
Laptop driver" to better match driver's functionality.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20241123133041.16042-1-sedat.dilek@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The udelay(5) is not enough, sometimes below kernel panic
still be triggered:
[ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1
[ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT)
[ 4.012985] Call trace:
[...]
[ 4.013029] arm64_serror_panic+0x64/0x70
[ 4.013034] do_serror+0x3c/0x70
[ 4.013039] el1h_64_error_handler+0x30/0x54
[ 4.013046] el1h_64_error+0x64/0x68
[ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48
[ 4.013059] __genpd_runtime_resume+0x30/0x80
[ 4.013066] genpd_runtime_resume+0x114/0x29c
[ 4.013073] __rpm_callback+0x48/0x1e0
[ 4.013079] rpm_callback+0x68/0x80
[ 4.013084] rpm_resume+0x3bc/0x6a0
[ 4.013089] __pm_runtime_resume+0x50/0x9c
[ 4.013095] pm_runtime_get_suppliers+0x60/0x8c
[ 4.013101] __driver_probe_device+0x4c/0x14c
[ 4.013108] driver_probe_device+0x3c/0x120
[ 4.013114] __driver_attach+0xc4/0x200
[ 4.013119] bus_for_each_dev+0x7c/0xe0
[ 4.013125] driver_attach+0x24/0x30
[ 4.013130] bus_add_driver+0x110/0x240
[ 4.013135] driver_register+0x68/0x124
[ 4.013142] __platform_driver_register+0x24/0x30
[ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma]
[ 4.013163] do_one_initcall+0x60/0x1e0
[ 4.013168] do_init_module+0x5c/0x21c
[ 4.013175] load_module+0x1a98/0x205c
[ 4.013181] init_module_from_file+0x88/0xd4
[ 4.013187] __arm64_sys_finit_module+0x258/0x350
[ 4.013194] invoke_syscall.constprop.0+0x50/0xe0
[ 4.013202] do_el0_svc+0xa8/0xe0
[ 4.013208] el0_svc+0x3c/0x140
[ 4.013215] el0t_64_sync_handler+0x120/0x12c
[ 4.013222] el0t_64_sync+0x190/0x194
[ 4.013228] SMP: stopping secondary CPUs
The correct way is to wait handshake, but it needs BUS clock of
BLK-CTL be enabled, which is in separate driver. So delay is the
only option here. The udelay(10) is a data got by experiment.
Fixes: e8dc41afca16 ("pmdomain: imx: gpcv2: Add delay after power up handshake")
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/lkml/20241007132555.GA53279@francesco-nb/
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: stable@vger.kernel.org
Message-ID: <20241121075231.3910922-1-shengjiu.wang@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When the ida allocation fails we need to free up the previously allocated
memory before returning the error code. Let's fix this and while at it,
let's also move the ida allocation to genpd_alloc_data() and the freeing to
genpd_free_data(), as it better belongs there.
Fixes: 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Message-ID: <20241122134207.157283-3-ulf.hansson@linaro.org>
|
|
When removing a genpd we don't clean up the genpd->dev correctly. Let's add
the missing put_device() in genpd_free_data() to fix this.
Fixes: 401ea1572de9 ("PM / Domain: Add struct device to genpd")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Message-ID: <20241122134207.157283-2-ulf.hansson@linaro.org>
|
|
The MT8188 SoC has a more in-depth power-domain tree, and the
CHECK_DTBS=y check could fail because the current MediaTek power
dt-binding is insufficient to cover its CAM_SUBA and CAM_SUBB
sub-domains.
Add one more nested power-domain layer to pass the check.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Fei Shao <fshao@chromium.org>
Message-ID: <20241001113052.3124869-2-fshao@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
These HP laptops use Realtek HDA codec ALC3315 combined CS35L56
Amplifiers. They need the quirk ALC285_FIXUP_HP_GPIO_LED to get
the micmute LED working.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241202144659.1553504-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It seems there is an alternate version of the hardware with a different
PID. User testing reveals this still works with the same interface as far
as the kernel is concerned, so just add the extra PID. Thanks to Heiko
Engemann for testing with this version.
Due to the way quirks-table.h is structured, that means we have to turn
the entire quirk struct into a macro to avoid duplicating it...
Cc: stable@vger.kernel.org
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20241202-rme-digiface-usb-id-v1-1-50f730d7a46e@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The usb_get_descriptor() function does DMA so we're not allowed
to use a stack buffer for that. Doing DMA to the stack is not portable
all architectures. Move the "new_device_descriptor" from being stored
on the stack and allocate it with kmalloc() instead.
Fixes: b909df18ce2a ("ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices")
Cc: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Disabling card detect from the host's ->shutdown_pre() callback turned out
to not be the complete solution. More precisely, beyond the point when the
mmc_bus->shutdown() has been called, to gracefully power off the card, we
need to prevent card detect. Otherwise the mmc_rescan work may poll for the
card with a CMD13, to see if it's still alive, which then will fail and
hang as the card has already been powered off.
To fix this problem, let's disable mmc_rescan prior to power off the card
during shutdown.
Reported-by: Anthony Pighin <anthony.pighin@nokia.com>
Fixes: 66c915d09b94 ("mmc: core: Disable card detect during shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Closes: https://lore.kernel.org/all/BN0PR08MB695133000AF116F04C3A9FFE83212@BN0PR08MB6951.namprd08.prod.outlook.com/
Tested-by: Anthony Pighin <anthony.pighin@nokia.com>
Message-ID: <20241125122446.18684-1-ulf.hansson@linaro.org>
|
|
The Vexia Edu Atla 10 tablet distributed to schools in the Spanish
Andalucía region has no ACPI fwnode associated with the SDHCI controller
for its microsd-slot and thus has no ACPI GPIO resource info.
This causes the following error to be logged and the slot to not work:
[ 10.572113] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
Add a DMI quirk table for providing gpiod_lookup_tables with manually
provided CD GPIO info and use this DMI table to provide the CD GPIO info
on this tablet. This fixes the microsd-slot not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Message-ID: <20241118210049.311079-1-hdegoede@redhat.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
These error paths should free comp_dai before returning.
Fixes: 909dadf21aae ("ASoC: SOF: topology: Make DAI widget parsing IPC agnostic")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/67d185cf-d139-4f8c-970a-dbf0542246a8@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current driver allows only packet size < 512B as SDP_LINK_CREDIT
register is set to default value.
This patch fixes this issue by configure the register with
maximum HW supported value to allow packet size > 512B.
Fixes: 2f7f33a09516 ("octeontx2-pf: Add representors for sdp MAC")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit 5de195060b2e ("mm: resolve faulty mmap_region() error path
behaviour") moved vm flags validation before fop->mmap for file
mappings. But when commit 25c17c4b55de ("hugetlb: arm64: add mte support")
was rebased on top of it, the hugetlbfs part was missed. Mmapping
hugetlbfs file may not have MAP_HUGETLB set.
Fixes: 25c17c4b55de ("hugetlb: arm64: add mte support")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241119200914.1145249-1-yang@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The below commit introduces a dummy lockdep map, but didn't get
the initialization quite right (it should mimic the initialization
of the real ww_mutex lockdep maps). It also introduced a separate
locking api selftest failure. Fix these.
Closes: https://lore.kernel.org/lkml/Zw19sMtnKdyOVQoh@boqun-archlinux/
Fixes: 823a566221a5 ("locking/ww_mutex: Adjust to lockdep nest_lock requirements")
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241127085430.3045-1-thomas.hellstrom@linux.intel.com
|
|
The PEBS kernel warnings can still be observed with the below case.
when the below commands are running in parallel for a while.
while true;
do
perf record --no-buildid -a --intr-regs=AX \
-e cpu/event=0xd0,umask=0x81/pp \
-c 10003 -o /dev/null ./triad;
done &
while true;
do
perf record -e 'cpu/mem-loads,ldlat=3/uP' -W -d -- ./dtlb
done
The commit b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing
PEBS_DATA_CFG") intends to flush the entire PEBS buffer before the
hardware is reprogrammed. However, it fails in the above case.
The first perf command utilizes the large PEBS, while the second perf
command only utilizes a single PEBS. When the second perf event is
added, only the n_pebs++. The intel_pmu_pebs_enable() is invoked after
intel_pmu_pebs_add(). So the cpuc->n_pebs == cpuc->n_large_pebs check in
the intel_pmu_drain_large_pebs() fails. The PEBS DS is not flushed.
The new PEBS event should not be taken into account when flushing the
existing PEBS DS.
The check is unnecessary here. Before the hardware is reprogrammed, all
the stale records must be drained unconditionally.
For single PEBS or PEBS-vi-pt, the DS must be empty. The drain_pebs()
can handle the empty case. There is no harm to unconditionally drain the
PEBS DS.
Fixes: b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241119135504.1463839-2-kan.liang@linux.intel.com
|
|
From PMU's perspective, the new Arrow Lake U is the same as the
Meteor Lake.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241121180526.2364759-1-kan.liang@linux.intel.com
|
|
Anders had bisected a crash using PREEMPT_RT with linux-next and
isolated it down to commit 894d1b3db41c ("locking/mutex: Remove
wakeups from under mutex::wait_lock"), where it seemed the
wake_q structure was somehow getting corrupted causing a null
pointer traversal.
I was able to easily repoduce this with PREEMPT_RT and managed
to isolate down that through various call stacks we were
actually calling wake_up_q() twice on the same wake_q.
I found that in the problematic commit, I had added the
wake_up_q() call in task_blocks_on_rt_mutex() around
__ww_mutex_add_waiter(), following a similar pattern in
__mutex_lock_common().
However, its just wrong. We haven't dropped the lock->wait_lock,
so its contrary to the point of the original patch. And it
didn't match the __mutex_lock_common() logic of re-initializing
the wake_q after calling it midway in the stack.
Looking at it now, the wake_up_q() call is incorrect and should
just be removed. So drop the erronious logic I had added.
Fixes: 894d1b3db41c ("locking/mutex: Remove wakeups from under mutex::wait_lock")
Closes: https://lore.kernel.org/lkml/6afb936f-17c7-43fa-90e0-b9e780866097@app.fastmail.com/
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20241114190051.552665-1-jstultz@google.com
|
|
When running the following command:
while true; do
stress-ng --cyclic 30 --timeout 30s --minimize --quiet
done
a warning is eventually triggered:
WARNING: CPU: 43 PID: 2848 at kernel/sched/deadline.c:794
setup_new_dl_entity+0x13e/0x180
...
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? enqueue_dl_entity+0x631/0x6e0
? setup_new_dl_entity+0x13e/0x180
? __warn+0x7e/0xd0
? report_bug+0x11a/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
enqueue_dl_entity+0x631/0x6e0
enqueue_task_dl+0x7d/0x120
__do_set_cpus_allowed+0xe3/0x280
__set_cpus_allowed_ptr_locked+0x140/0x1d0
__set_cpus_allowed_ptr+0x54/0xa0
migrate_enable+0x7e/0x150
rt_spin_unlock+0x1c/0x90
group_send_sig_info+0xf7/0x1a0
? kill_pid_info+0x1f/0x1d0
kill_pid_info+0x78/0x1d0
kill_proc_info+0x5b/0x110
__x64_sys_kill+0x93/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f0dab31f92b
This warning occurs because set_cpus_allowed dequeues and enqueues tasks
with the ENQUEUE_RESTORE flag set. If the task is boosted, the warning
is triggered. A boosted task already had its parameters set by
rt_mutex_setprio, and a new call to setup_new_dl_entity is unnecessary,
hence the WARN_ON call.
Check if we are requeueing a boosted task and avoid calling
setup_new_dl_entity if that's the case.
Fixes: 295d6d5e3736 ("sched/deadline: Fix switching to -deadline")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20240724142253.27145-2-wander@redhat.com
|
|
Update the documentation for the `preempt=' parameter which now also
accepts `lazy'.
Fixes: 7c70cb94d29cd ("sched: Add Lazy preemption model")
Reported-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20241122173557.MYOtT95Q@linutronix.de
|
|
Scheduler raises a SCHED_SOFTIRQ to trigger a load balancing event on
from the IPI handler on the idle CPU. If the SMP function is invoked
from an idle CPU via flush_smp_call_function_queue() then the HARD-IRQ
flag is not set and raise_softirq_irqoff() needlessly wakes ksoftirqd
because soft interrupts are handled before ksoftirqd get on the CPU.
Adding a trace_printk() in nohz_csd_func() at the spot of raising
SCHED_SOFTIRQ and enabling trace events for sched_switch, sched_wakeup,
and softirq_entry (for SCHED_SOFTIRQ vector alone) helps observing the
current behavior:
<idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ from nohz_csd_func
<idle>-0 [000] dN.4.: sched_wakeup: comm=ksoftirqd/0 pid=16 prio=120 target_cpu=000
<idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED]
<idle>-0 [000] .Ns1.: softirq_exit: vec=7 [action=SCHED]
<idle>-0 [000] d..2.: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/0 next_pid=16 next_prio=120
ksoftirqd/0-16 [000] d..2.: sched_switch: prev_comm=ksoftirqd/0 prev_pid=16 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120
...
Use __raise_softirq_irqoff() to raise the softirq. The SMP function call
is always invoked on the requested CPU in an interrupt handler. It is
guaranteed that soft interrupts are handled at the end.
Following are the observations with the changes when enabling the same
set of events:
<idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ for nohz_idle_balance
<idle>-0 [000] dN.1.: softirq_raise: vec=7 [action=SCHED]
<idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED]
No unnecessary ksoftirqd wakeups are seen from idle task's context to
service the softirq.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Closes: https://lore.kernel.org/lkml/fcf823f-195e-6c9a-eac3-25f870cb35ac@inria.fr/ [1]
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20241119054432.6405-5-kprateek.nayak@amd.com
|
|
busy
Commit b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
optimizes IPIs to idle CPUs in TIF_POLLING_NRFLAG mode by setting the
TIF_NEED_RESCHED flag in idle task's thread info and relying on
flush_smp_call_function_queue() in idle exit path to run the
call-function. A softirq raised by the call-function is handled shortly
after in do_softirq_post_smp_call_flush() but the TIF_NEED_RESCHED flag
remains set and is only cleared later when schedule_idle() calls
__schedule().
need_resched() check in _nohz_idle_balance() exists to bail out of load
balancing if another task has woken up on the CPU currently in-charge of
idle load balancing which is being processed in SCHED_SOFTIRQ context.
Since the optimization mentioned above overloads the interpretation of
TIF_NEED_RESCHED, check for idle_cpu() before going with the existing
need_resched() check which can catch a genuine task wakeup on an idle
CPU processing SCHED_SOFTIRQ from do_softirq_post_smp_call_flush(), as
well as the case where ksoftirqd needs to be preempted as a result of
new task wakeup or slice expiry.
In case of PREEMPT_RT or threadirqs, although the idle load balancing
may be inhibited in some cases on the ilb CPU, the fact that ksoftirqd
is the only fair task going back to sleep will trigger a newidle balance
on the CPU which will alleviate some imbalance if it exists if idle
balance fails to do so.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-4-kprateek.nayak@amd.com
|
|
The need_resched() check currently in nohz_csd_func() can be tracked
to have been added in scheduler_ipi() back in 2011 via commit
ca38062e57e9 ("sched: Use resched IPI to kick off the nohz idle balance")
Since then, it has travelled quite a bit but it seems like an idle_cpu()
check currently is sufficient to detect the need to bail out from an
idle load balancing. To justify this removal, consider all the following
case where an idle load balancing could race with a task wakeup:
o Since commit f3dd3f674555b ("sched: Remove the limitation of WF_ON_CPU
on wakelist if wakee cpu is idle") a target perceived to be idle
(target_rq->nr_running == 0) will return true for
ttwu_queue_cond(target) which will offload the task wakeup to the idle
target via an IPI.
In all such cases target_rq->ttwu_pending will be set to 1 before
queuing the wake function.
If an idle load balance races here, following scenarios are possible:
- The CPU is not in TIF_POLLING_NRFLAG mode in which case an actual
IPI is sent to the CPU to wake it out of idle. If the
nohz_csd_func() queues before sched_ttwu_pending(), the idle load
balance will bail out since idle_cpu(target) returns 0 since
target_rq->ttwu_pending is 1. If the nohz_csd_func() is queued after
sched_ttwu_pending() it should see rq->nr_running to be non-zero and
bail out of idle load balancing.
- The CPU is in TIF_POLLING_NRFLAG mode and instead of an actual IPI,
the sender will simply set TIF_NEED_RESCHED for the target to put it
out of idle and flush_smp_call_function_queue() in do_idle() will
execute the call function. Depending on the ordering of the queuing
of nohz_csd_func() and sched_ttwu_pending(), the idle_cpu() check in
nohz_csd_func() should either see target_rq->ttwu_pending = 1 or
target_rq->nr_running to be non-zero if there is a genuine task
wakeup racing with the idle load balance kick.
o The waker CPU perceives the target CPU to be busy
(targer_rq->nr_running != 0) but the CPU is in fact going idle and due
to a series of unfortunate events, the system reaches a case where the
waker CPU decides to perform the wakeup by itself in ttwu_queue() on
the target CPU but target is concurrently selected for idle load
balance (XXX: Can this happen? I'm not sure, but we'll consider the
mother of all coincidences to estimate the worst case scenario).
ttwu_do_activate() calls enqueue_task() which would increment
"rq->nr_running" post which it calls wakeup_preempt() which is
responsible for setting TIF_NEED_RESCHED (via a resched IPI or by
setting TIF_NEED_RESCHED on a TIF_POLLING_NRFLAG idle CPU) The key
thing to note in this case is that rq->nr_running is already non-zero
in case of a wakeup before TIF_NEED_RESCHED is set which would
lead to idle_cpu() check returning false.
In all cases, it seems that need_resched() check is unnecessary when
checking for idle_cpu() first since an impending wakeup racing with idle
load balancer will either set the "rq->ttwu_pending" or indicate a newly
woken task via "rq->nr_running".
Chasing the reason why this check might have existed in the first place,
I came across Peter's suggestion on the fist iteration of Suresh's
patch from 2011 [1] where the condition to raise the SCHED_SOFTIRQ was:
sched_ttwu_do_pending(list);
if (unlikely((rq->idle == current) &&
rq->nohz_balance_kick &&
!need_resched()))
raise_softirq_irqoff(SCHED_SOFTIRQ);
Since the condition to raise the SCHED_SOFIRQ was preceded by
sched_ttwu_do_pending() (which is equivalent of sched_ttwu_pending()) in
the current upstream kernel, the need_resched() check was necessary to
catch a newly queued task. Peter suggested modifying it to:
if (idle_cpu() && rq->nohz_balance_kick && !need_resched())
raise_softirq_irqoff(SCHED_SOFTIRQ);
where idle_cpu() seems to have replaced "rq->idle == current" check.
Even back then, the idle_cpu() check would have been sufficient to catch
a new task being enqueued. Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") overloads the interpretation of
TIF_NEED_RESCHED for TIF_POLLING_NRFLAG idling, remove the
need_resched() check in nohz_csd_func() to raise SCHED_SOFTIRQ based
on Peter's suggestion.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-3-kprateek.nayak@amd.com
|
|
do_softirq_post_smp_call_flush() on PREEMPT_RT kernels carries a
WARN_ON_ONCE() for any SOFTIRQ being raised from an SMP-call-function.
Since do_softirq_post_smp_call_flush() is called with preempt disabled,
raising a SOFTIRQ during flush_smp_call_function_queue() can lead to
longer preempt disabled sections.
Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") IPIs to an idle CPU in
TIF_POLLING_NRFLAG mode can be optimized out by instead setting
TIF_NEED_RESCHED bit in idle task's thread_info and relying on the
flush_smp_call_function_queue() in the idle-exit path to run the
SMP-call-function.
To trigger an idle load balancing, the scheduler queues
nohz_csd_function() responsible for triggering an idle load balancing on
a target nohz idle CPU and sends an IPI. Only now, this IPI is optimized
out and the SMP-call-function is executed from
flush_smp_call_function_queue() in do_idle() which can raise a
SCHED_SOFTIRQ to trigger the balancing.
So far, this went undetected since, the need_resched() check in
nohz_csd_function() would make it bail out of idle load balancing early
as the idle thread does not clear TIF_POLLING_NRFLAG before calling
flush_smp_call_function_queue(). The need_resched() check was added with
the intent to catch a new task wakeup, however, it has recently
discovered to be unnecessary and will be removed in the subsequent
commit after which nohz_csd_function() can raise a SCHED_SOFTIRQ from
flush_smp_call_function_queue() to trigger an idle load balance on an
idle target in TIF_POLLING_NRFLAG mode.
nohz_csd_function() bails out early if "idle_cpu()" check for the
target CPU, and does not lock the target CPU's rq until the very end,
once it has found tasks to run on the CPU and will not inhibit the
wakeup of, or running of a newly woken up higher priority task. Account
for this and prevent a WARN_ON_ONCE() when SCHED_SOFTIRQ is raised from
flush_smp_call_function_queue().
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-2-kprateek.nayak@amd.com
|
|
Commit 8f9ea86fdf99b added some logic to sched_setaffinity that included
a WARN when a per-task affinity assignment races with a cpuset update.
Specifically, we can have a race where a cpuset update results in the
task affinity no longer being a subset of the cpuset. That's fine; we
have a fallback to instead use the cpuset mask. However, we have a WARN
set up that will trigger if the cpuset mask has no overlap at all with
the requested task affinity. This shouldn't be a warning condition; its
trivial to create this condition.
Reproduced the warning by the following setup:
- $PID inside a cpuset cgroup
- another thread repeatedly switching the cpuset cpus from 1-2 to just 1
- another thread repeatedly setting the $PID affinity (via taskset) to 2
Fixes: 8f9ea86fdf99b ("sched: Always preserve the user requested cpumask")
Signed-off-by: Josh Don <joshdon@google.com>
Acked-and-tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Link: https://lkml.kernel.org/r/20241111182738.1832953-1-joshdon@google.com
|
