summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-11ARM i.MX5 uart clock bug fixYong Shen
uart clk is from pll3 on mx53 instead of mx51 Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM i.MX53 enable spi on EVK boardYong Shen
1. some macro definitions fix 2. add platform data for spi device 3. register spi clocks Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ALSA: include delay.h for msleep in Xonar DG supportStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-11sh: Fix up legacy PTEA space attribute mapping.Paul Mundt
When p3_ioremap() was converted to ioremap_prot() there was some breakage introduced where the 29-bit segmentation logic would trap the area range and return an identity mapping without having allowed the area specification to force mapping through page tables. This wires up a PCC mask for pgprot verification to work out whether to short-circuit the identity mapping on legacy parts, restoring the previous behaviour. Reported-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: stable@kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: Stub out legacy PCC pgprot encoding for X2 TLBs.Paul Mundt
Presently it's still possible to reference the PAGE_KERNEL_PCC pgprot encoding on X2 TLBs which simply don't support it at all. Convert this over to follow the nommu behaviour and simply hand back an invalid pgprot value so we error out properly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: constify prefetch pointers.Paul Mundt
prefetch()/prefetchw() are supposed to take a const void * instead of a straight void *, which the build recently started complaining about, fix them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11powerpc/pseries: Fix VPHN build errors on non-SMP systemsJesse Larrew
The header asm/hvcall.h was previously included indirectly via smp.h. On non-SMP systems, however, these declarations are excluded and the build breaks. This is easily fixed by including asm/hvcall.h directly. The VPHN feature is only meaningful on NUMA systems that implement the SPLPAR option, so exclude the VPHN code on systems without SPLPAR enabled. Also, expose unmap_cpu_from_node() on systems with SPLPAR enabled, even if CONFIG_HOTPLUG_CPU is disabled. Lastly, map_cpu_to_node() is now needed by VPHN to manipulate the node masks after boot time, so remove the __cpuinit annotation to fix a section mismatch. Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
2011-01-11Merge remote branch 'gcl/next' into nextBenjamin Herrenschmidt
2011-01-11Merge branches 'sh/memchunk' and 'common/mmcif' into sh-latestPaul Mundt
2011-01-11sh: Add a machvec callback for early memblock reservations.Paul Mundt
This adds in a callback to the machvec to allow platforms to do early reservations through memblock. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: mackerel: Add touchscreen ST1232 supportTony SIM
Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: ap4eb: SCIF port for earlyprintk when using zbootSimon Horman
Initialise the SCIF serial port to allow earlyprintk output when using zboot. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: mackerel: SCIF port for earlyprintk when using zbootSimon Horman
Initialise the SCIF serial port to allow earlyprintk output when using zboot. It is based on a very similar patched for AP4EB. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: mackerel: Add support get_cd in CN23Yusuke Goda
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: update sh7757lcr_defconfigYoshihiro Shimoda
- disable the 8250 driver (fix the build error on sh7757lcr) - enable sh_eth driver Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: add PVR probing for SH7757 3rd cutYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: Use device_initcall() instead of __initcall()Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: intc - convert board specific landisk codeNobuhiro Iwamatsu
This converts the board specific interrupt code for landisk to make use of intc (use register_intc_controller). Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigarui.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: Move init_landisk_IRQ to header fileNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: Fix IRQ macro in header of landiskNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: pci: Add pci_fixup_pcic to pci of landiskNobuhiro Iwamatsu
This adds a pci setting revision for landisk. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11sh: Kill off deprecated ctrl_in/out I/O routines.Paul Mundt
Now that all of the in-tree drivers have been converted to portable I/O accessors, we can kill off the legacy ones with extreme prejudice. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-10Merge branch 'master' into for-linus-mergedAlex Elder
This merge pulls the XFS master branch into the latest Linus master. This results in a merge conflict whose best fix is not obvious. I manually fixed the conflict, in "fs/xfs/xfs_iget.c". Dave Chinner had done work that resulted in RCU freeing of inodes separate from what Nick Piggin had done, and their results differed slightly in xfs_inode_free(). The fix updates Nick's call_rcu() with the use of VFS_I(), while incorporating needed updates to some XFS inode fields implemented in Dave's series. Dave's RCU callback function has also been removed. Signed-off-by: Alex Elder <aelder@sgi.com>
2011-01-11video: matroxfb: Correct video option in comments and kernel config help.Vicente Jiménez
Configuring the kernel I found that the Matrox frame buffer help has a different option than the one in the docs (Documentation/fb/matroxfb.txt). I decided to check the source code to see what is the correct option. drivers/video/matrox/matroxfb_base.c has a lot of comments that sugests that the video option is "matrox". However in line 2452 of this same file you have: fb_get_options("matroxfb", &option) video=matroxfb:XXX is the correct video option not video=matrox:XXX. Signed-off-by: Vicente Jimenez Aguilar <googuy@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11fbdev: sh_mobile_hdmi: simplify pointer handlingGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11fbdev: sh_mobile_hdmi: framebuffer notifiers have to be registeredGuennadi Liakhovetski
A previous patch added a framebuffer notifier to sh_mobile_hdmi.c, but did not register it with the framebuffer core. This patch adds such a registration and moves the notifier block into dynamically allocated per-device private data. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11fbdev: sh_mobile_hdmi: add command line option to use the preferred EDID modeGuennadi Liakhovetski
Currently, if no command-line option is specified, the sh_mobile_hdmi will use the default 720p video mode. If a command line option of the form "video=sh_mobile_lcdc:<width>x<height>@<refresh>" is provided, the driver will look for that mode among those, available in the monitor EDID. This patch adds the ability to request the driver to use monitor's preferred mode by specifying 0 as width and hight in the above string. If that mode is not supported by the system, the driver will continue scanning through EDID modes, until it finds a suitable one. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11Merge branch 'for-paul-38-rebased' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt
2011-01-10Merge branches 'cxgb4', 'ipath', 'ipoib', 'mlx4', 'mthca', 'nes', 'qib' and ↵Roland Dreier
'srp' into for-next
2011-01-10IB/qib: Fix refcount leak in lkey/rkey validationMike Marciniszyn
The mr optimization introduced a reference count leak on an exception test. The lock/refcount manipulation is moved down and the problematic exception test now calls bail to insure that the lock is released. Additional fixes as suggested by Ralph Campbell <ralph.campbell@qlogic.org>: - reduce lock scope of dma regions - use explicit values on returns vs. automatic ret value Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Improve SERDES tunning on QMH boardsMike Marciniszyn
Improve the QMH SERDES tunning on initial driver load by having the driver go through a link state change. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Unnecessary delayed completions on RC connectionMike Marciniszyn
Currently on receipt of a response message (ACKs, RDMA Response, Atomic Responses etc.) if the SDMA completion counter is not advanced the driver delays the completion of the WQE. In most cases this is overly pessimistic as the response (ACK) to a previously transmitted send implies that the send is complete. Ensure that SDMA queue is progressed appropriately before determining if a send has delayed completions. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Issue pre-emptive NAKs on eager buffer overflowMike Marciniszyn
Under congestion resulting in eager buffer overflow attempt to send pre-emptive NAKs if header queue entries with TID errors are generated and a valid header is present. This prevents long timeouts and flow restarts if a trailing set of packets are dropped due to eager overflows. Pre-emptive NAKs are currently only supported for RDMA writes. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: RDMA lkey/rkey validation is inefficient for large MRsMike Marciniszyn
The current code loops during rkey/lkey validiation to isolate the MR for the RDMA, which is expensive when the current operation is inside a very large memory region. This fix optimizes rkey/lkey validation routines for user memory regions and fast memory regions. The MR entry can be isolated by shifts/mods instead of looping. The existing loop is preserved for phys memory regions for now. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Change QPN incrementMike Marciniszyn
Changing from +1 to +2 allows for better QP distribution across receive contexts. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add fix missing from earlier patchMike Marciniszyn
The upstream code was missing part of a receive/error race fix from the internal tree. Add the missing part, which makes future merges possible. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Change receive queue/QPN selectionMike Marciniszyn
The basic idea is that on SusieQ, the difficult part of mapping QPN to context is handled by the mapping registers so the generic QPN allocation doesn't need to worry about chip specifics. For Monty and Linda, there is no mapping table so the qpt->mask (same as dd->qpn_mask), is used to see if the QPN to context falls within [zero..dd->n_krcv_queues). Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix interrupt mitigationMike Marciniszyn
For SusieQ we need to write to the interrupt timer register before updating the header queue head with interrupt count. This is to ensure that the timer is enabled properly and a receive available interrupt is delivered. Otherwise this interrupt can be lost if the receiver header/eager queues are full before the timer is enabled. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Avoid duplicate writes to the rcv head registerMike Marciniszyn
Avoid duplicate writes to the head register as this can lead to lost interrupts if the context goes full before the second write is done. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add a few new SERDES tuningsMike Marciniszyn
Add new SERDES tuning to aid manufacturing. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Reset packet list after freeingMike Marciniszyn
Reset the list pointers after freeing the SDMA packet list. This is done to any potential double-free cases. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: New SERDES init routine and improvements to SI qualityMike Marciniszyn
Implement new SERDES initialization routine and improvements to signal integrity -- disable LE1 adaptation, disable LOS after link-up, set better SERDES parameters. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Clear WAIT_SEND flags when setting QP to error stateMike Marciniszyn
If these flags are set when the QP is transitioned to the error state, it will wait until the flags are cleared, which may never happen if the error transition is due to a link going down. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix context allocation with multiple HCAsMike Marciniszyn
The driver was incorrectly choosing HCAs on which to allocate new user contexts based on overall count of usable ports regardless whether the usable port was on the currently selected HCA. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix multi-Florida HCA host panic on rebootMike Marciniszyn
Add check when setting configured contexts that the value does not exceed the number of contexts allocated for the card. If the value exceeds the already allocated count, set it to what is already allocated. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE betterMike Marciniszyn
When the link transitions from ACTIVE_DEFERRED to ACTIVE, the driver only sees the ACTIVE state. With this change, it will check whether the state was already ACTIVE and if so, it will not generated IB events and will not clear symbol error counts. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: UD send with immediate receive completion has wrong sizeMike Marciniszyn
The code to generate receive completion entries for UD send with immediate contains the wrong payload length. This is because when the code to compute the payload size was moved, the value of hdrsize didn't get moved too. The fix is to update tlen directly. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Set port physical state even if other fields are invalidMike Marciniszyn
The IBTA vol. 1 release 1.2.1 spec. says: C14-24.2.1: If PortInfo:Portstate=Down, then a SubnSet(PortInfo) shall make any changes it specifies to PortInfo:PortPhysicalState; any other result is vendor-dependent. The patch changes the error handling so that the reply says there are invalid fields but still attempts to set fields that are in range including PortInfo:PortPhysicalState. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Generate completion callback on errorsMike Marciniszyn
According to IBTA vol. 1, C11-30.1.1, a notification callback is invoked if the CQ is armed for the next solicited completion event or an error completion. The error case wasn't being generated correctly. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add support for the new QME7362 cardMike Marciniszyn
Add support to recognize another board variation named QME7362. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit (git 2.34.1) at 2025-09-19 17:41:09 +0000