summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-25[SCSI] fcoe: set default FIP mode as FIP_MODE_FABRICVasu Dev
Since sometimes current FIP_MODE_AUTO mode falls back to non-FIP mode while DCB link still getting ready in fabric mode with its peer switch, it falls back after few libfc flogi retries and that is not we want while working with FIP enabled switches in FABRIC mode, therefore sets default as FIP_MODE_FABRIC as discussed and agreed before in this mail thread http://www.open-fcoe.org/pipermail/devel/2010-August/010511.html Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] libfc: adds flogi retry in case DID is zero in RJTVasu Dev
Sometimes switch in NPV mode rejects flogi request with DID zero and in that case flogi is not tried again and port remains offline, so this patch validates DID for non zero along with only ACC response to allow flogi retry for RJT with DID=0 also succeed FLOGI in next try. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] libfc: use DID_TRANSPORT_DISRUPTED while lport not readyVasu Dev
This is per Mile Christie feedback since in this case IO could get retried for tape devices and therefore DID_REQUEUE cannot be used, more details in this thread. http://marc.info/?l=linux-scsi&m=127970522630136&w=2 Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] libfc: fix setting of rport dev lossMike Christie
There does not seem to be a reason why libfc adds a 5 second delay to the user requested value for the dev loss tmo. There also does not seem to be a reason to allow setting it to 0 (or really close). This patch removes the extra 5 sec delay, and for 0 it sets it to 1 like other fc drivers. We should actually be able to set it to 0 since the queue_delayed_work API will just call queue_work, but other drivers set it to 1 in that case. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25tunnels: add _rcu annotationsEric Dumazet
(struct ip6_tnl)->next is rcu protected : (struct ip_tunnel)->next is rcu protected : (struct xfrm6_tunnel)->next is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25net/802: add __rcu annotationsEric Dumazet
(struct net_device)->garp_port is rcu protected : (struct garp_port)->applicants is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25ipv6: ip6_ptr rcu annotationsEric Dumazet
(struct net_device)->ip6_ptr is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25vlan: rcu annotationsEric Dumazet
(struct net_device)->vlgrp is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25tms380tr: Use mdelay() in tms380tr_wait().David S. Miller
This driver tries to do up to half-second udelay() calls, which overflows on x86-64. Reported-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25[SCSI] gdth: integer overflow in ioctlDan Carpenter
gdth_ioctl_alloc() takes the size variable as an int. copy_from_user() takes the size variable as an unsigned long. gen.data_len and gen.sense_len are unsigned longs. On x86_64 longs are 64 bit and ints are 32 bit. We could pass in a very large number and the allocation would truncate the size to 32 bits and allocate a small buffer. Then when we do the copy_from_user(), it would result in a memory corruption. CC: stable@kernel.org Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] Fix race when removing SCSI devicesChristof Schmitt
Removing SCSI devices through echo 1 > /sys/bus/scsi/devices/ ... /delete while the FC transport class removes the SCSI target can lead to an oops: Unable to handle kernel pointer dereference at virtual kernel address 00000000b6815000 Oops: 0011 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: sunrpc qeth_l3 binfmt_misc dm_multipath scsi_dh dm_mod ipv6 qeth ccwgroup [last unloaded: scsi_wait_scan] CPU: 1 Not tainted 2.6.35.5-45.x.20100924-s390xdefault #1 Process fc_wq_0 (pid: 861, task: 00000000b7331240, ksp: 00000000b735bac0) Krnl PSW : 0704200180000000 00000000003ff6e4 (__scsi_remove_device+0x24/0xd0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000001 0000000000000000 00000000b6815000 00000000bc24a8c0 00000000003ff7c8 000000000056dbb8 0000000000000002 0000000000835d80 ffffffff00000000 0000000000001000 00000000b6815000 00000000bc24a7f0 00000000b68151a0 00000000b6815000 00000000b735bc20 00000000b735bbf8 Krnl Code: 00000000003ff6d6: a7840001 brc 8,3ff6d8 00000000003ff6da: a7fbffd8 aghi %r15,-40 00000000003ff6de: e3e0f0980024 stg %r14,152(%r15) >00000000003ff6e4: e31021200004 lg %r1,288(%r2) 00000000003ff6ea: a71f0000 cghi %r1,0 00000000003ff6ee: a7a40011 brc 10,3ff710 00000000003ff6f2: a7390003 lghi %r3,3 00000000003ff6f6: c0e5ffffc8b1 brasl %r14,3f8858 Call Trace: ([<0000000000001000>] 0x1000) [<00000000003ff7d2>] scsi_remove_device+0x42/0x54 [<00000000003ff8ba>] __scsi_remove_target+0xca/0xfc [<00000000003ff99a>] __remove_child+0x3a/0x48 [<00000000003e3246>] device_for_each_child+0x72/0xbc [<00000000003ff93a>] scsi_remove_target+0x4e/0x74 [<0000000000406586>] fc_rport_final_delete+0xb2/0x23c [<000000000015d080>] worker_thread+0x200/0x344 [<000000000016330c>] kthread+0xa0/0xa8 [<0000000000106c1a>] kernel_thread_starter+0x6/0xc [<0000000000106c14>] kernel_thread_starter+0x0/0xc INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000000003ff7cc>] scsi_remove_device+0x3c/0x54 The function __scsi_remove_target iterates through the SCSI devices on the host, but it drops the host_lock before calling scsi_remove_device. When the SCSI device is deleted from another thread, the pointer to the SCSI device in scsi_remove_device can become invalid. Fix this by getting a reference to the SCSI device before dropping the host_lock to keep the SCSI device alive for the call to scsi_remove_device. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] sd: Export effective protection mode in sysfsMartin K. Petersen
Create a sysfs entry that reports the negotiated DIX/DIF protection mode for a SCSI disk. This depends on the protection type the disk is formatted with as well as the protection capabilities advertised by the controller. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Update driver version to 5.02.00-k4Vikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: grab hardware_lock in eh_abort before accessing srbMike Christie
grab hardware_lock in eh_abort before accessing srb to avoid race between command completion and get refcount on srb. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: remove unwanted check for bad spdVikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: update AER support for ISP82XXVikas Chaudhary
* Cleanup qla4xxx_pci_mmio_enabled(): don't want to return PCI_ERS_NEED_RESET if firmware hung. IDC will take care of it. * Request irq after initialize_adapter() in qla82xx_error_recovery(). * Return all active commands from qla4xxx_pci_error_detected(). * Cleanup ql4_def.h Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Clear the rom lock if the firmware died while holding it.Shyam Sundar
There is a possibility that the firmware dies while the rom lock is held. The only way to recover from this condition is to forcefully unlock. Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: use CRB Register for Request Queue in-pointerShyam Sundar
Switching from doorbell mechanism to CRB register based Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: dump mailbox registers on System ErrorKaren Higgins
Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25net: Increase xmit RECURSION_LIMIT to 10.David S. Miller
Three is definitely too low, and we know from reports that GRE tunnels stacked as deeply as 37 levels cause stack overflows, so pick some reasonable value between those two. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25[SCSI] qla4xxx: Add support for 8130/8131 AENs.Shyam Sundar
AEN 8130 Corresponds to an event representing the insertion (detection) of a transceiver. It also reports the type of the SFP+. AEN 8131 corresponds to the removal of a transceiver. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Reset seconds_since_last_heartbeat correctly.Lalit Chandivade
The seconds_since_last_heartbeat should be checked for consecutive heartbeat checks. Currently it could happen that it gets set to max (2 seconds) for non-consecutive heartbeat checks. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: On firmware hang do not wait for the outstanding commands to ↵Nilesh Javali
complete Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: free_irqs on failed initialize_adapterVikas Chaudhary
Since interrupts are registered in start_firmware(load_risc) for 82xx, free them if init_firmware fails. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: correct data type of sense_len in qla4xxx_status_cont_entryVikas Chaudhary
change data type of sense_len from uint8_t to uint16_t Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: remove "ha->retry_reset_ha_cnt" from wait_for_hba_onlineVikas Chaudhary
remove "ha->retry_reset_ha_cnt" from wait_for_hba_online as its initialize to zero at driver init time so it could always return QLA_ERROR from wait_for_hba_online() without waiting for hba to come online. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: honor return status of qla4xxx_hw_resetVikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Trivial cleanupVikas Chaudhary
* cleanup function qla4xxx_recovery_timeout - No need to wakeup dpc thread from function qla4xxx_recovery_timeout() as we are not doing anything in do_dpc() thread when wakeup from qla4xxx_recovery_timeout() * cleanup function qla4xxx_wait_for_hba_online - Remove hard coded value from qla4xxx_wait_for_hba_online(). * cleanup function qla4xxx_start_firmware_from_flash - display seconds * cleanup function qla4_8xxx_load_risc - Remove redundant code. * cleanup function qla4xxx_get_firmware_status - update debug statement * cleanup function qla4_8xxx_try_start_fw - update return status Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25mlx4_en: Fix out of bounds array accessEli Cohen
When searching for a free entry in either mlx4_register_vlan() or mlx4_register_mac(), and there is no free entry, the loop terminates without updating the local variable free thus causing out of array bounds access. Fix this by adding a proper check outside the loop. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25macb: Don't re-enable interrupts while in polling modeJoshua Hoke
On a busy network, the macb driver could get stuck in the interrupt handler, quickly triggering the watchdog, due to a confluence of factors: 1. macb_poll re-enables interrupts unconditionally, even when it will be called again because it exhausted its rx budget 2. macb_interrupt only disables interrupts after scheduling macb_poll, but scheduling fails when macb_poll is already scheduled because it didn't call napi_complete 3. macb_interrupt loops until the interrupt status register is clear, which will never happen in this case if the driver doesn't disable the RX interrupt Since macb_interrupt runs in interrupt context, this effectively locks up the machine, triggering the hardware watchdog. This issue was readily reproducible on a flooded network with a modified 2.6.27.48 kernel. The same problem appears to still be in the 2.6.36-rc8 driver code, so I am submitting this patch against that version. I have not tested this version of the patch except to make sure the kernel compiles. Signed-off-by: Joshua Hoke <joshua.hoke@sixnet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Fix CSO for UDP packetsSomnath Kotur
We're setting skb->ip_summed to CHECKSUM_NONE for all non-TCP pkts, making the stack recompute checksum.This is a bug for UDP pkts for which cso must be used. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Call netif_carier_off() after register_netdev()Somnath Kotur
Calling netif_carrier_off before register_netdev was causing the network interface to miss a linkwatch pending event leading to an inconsistent state if the link is not up when interface is initialized.This is now invoked after register_netdev. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25cxgb3: fix device opening error pathDivy Le Ray
Only negative return from bind_qsets() should be considered an error and propagated. It fixes an issue reported by IBM on P Series platform. Signed-off-by: Divy Le Ray <divy@chelsio.com> Tested-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25iwlwifi: quiet a noisy printkDon Fry
Timing issues in microcode for some devices can cause a compressed BA to be sent to the driver prior to returning any a-MPDU notification. Traces show RTS-CTS is exchanged and then the timer fires which causes an empty BA to be sent which acknowledges nothing. This results in a noisy printk. Only print the message if the bitmap is non-zero. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: resume aggregation immediately after a hardware resetFelix Fietkau
Since aggregation is usually triggered by tx completion, a hardware reset (because of beacon stuck, tx hang or baseband hang) can significantly delay the transmission of the next AMPDU (until the next tx completion event). Fix this by rescheduling aggregation after such a reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix scheduling while atomicChristian Lamparter
This patch fixes the following mishap: BUG: scheduling while atomic: wpa_supplicant/4164/0x00000002 Modules linked in: carl9170 mac80211 [...] Pid: 4164, comm: wpa_supplicant Not tainted 2.6.36-wl+ #119 Call Trace: [<c13779a9>] ? schedule+0x349/0x4c0 [<c13780d6>] ? schedule_timeout+0x106/0x1e0 [<c1037f50>] ? process_timeout+0x0/0x10 [<c1377e8d>] ? wait_for_common+0x9d/0x140 [<c1029110>] ? default_wake_function+0x0/0x10 [<f80c6080>] ? carl9170_exec_cmd+0xf0/0x250 [carl9170] [<f80c695e>] ? carl9170_set_mac_reg+0x5e/0x70 [carl9170] [<f80c3f76>] ? carl9170_op_add_interface+0x176/0x310 [carl9170] [...] rcu_read_unlock() call was erroneously placed after the sync. function carl9170_mod_virtual_mac. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25mac80211: Fix ibss station got expired immediatelyRajkumar Manoharan
Station addition in ieee80211_ibss_rx_queued_mgmt is not updating sta->last_rx which is causing station expiry in ieee80211_ibss_work path. So sta addition and deletion happens repeatedly. CC: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25b43: N-PHY: fix infinite-loop-typoRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25wl1251: fix module namesGrazvydas Ignotas
The wl1251 move accidently renamed wl1251_sdio and wl1251_spi modules to just sdio and spi. Restore proper module names. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: fix handling of rate control probe framesFelix Fietkau
The ath9k aggregation code was already checking the rate control probe flag to prevent starting an aggregate frame with a sampling rate. What was missing was closing an aggregate before adding a probing frame to it. Without that, rate control cannot have precise control over probing, which delays using faster rates when the channel conditions improve. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: fix crash in ath_update_survey_statsFelix Fietkau
If ah->curchan is uninitialized, the channel index is bogus, which leads to invalid memory access when the cycle counters are updated. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k_hw: Fix divide by zero cases in paprd.Senthil Balasubramanian
We are not handling all divide by zero cases in paprd. Add additional checks for divide by zero cases in papard. This patch has fixes intended for kernel 2.6.36. Cc: stable@kernel.org Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k_hw: Fix TX carrier leakage for IEEE compliance on AR9003 2.2Luis R. Rodriguez
This updates the initvals for the AR9003 2.2 chipsets. The initvals are the initial register values we use for our registers upon hardware reset. This synchs up the initvals to match what our latest recommendation from our systems engineering team. The description of changes in this update: Improves ability to support very strong Rx conditions. Enhances DFS support for AP-mode. Improves performance of Tx carrier leak calibration. Adds support for Japan channel 14 Tx filtering requirements. Improves Tx power accuracy. Impact: Update required to address degraded throughput at very short range. Update required for AP-mode DFS certification. Update required to comply to IEEE Tx carrier leak specification. May not meet expected +/- 2 dB Tx power accuracy without update. The most important fix here would be the TX carrier leakage required to comply with IEEE 802.11 specifications. The group of changes have been tested all together in one release. References: Osprey 2.2 header file ver #33 Checksums: $ ./initvals -f ar9003-2p2 0x000000004a488fc7 ar9300_2p2_radio_postamble 0x0000000046cb1300 ar9300Modes_lowest_ob_db_tx_gain_table_2p2 0x00000000e912711f ar9300Modes_fast_clock_2p2 0x0000000037ac0ee8 ar9300_2p2_radio_core 0x00000000047a7700 ar9300Common_rx_gain_table_merlin_2p2 0x0000000003f783bb ar9300_2p2_mac_postamble 0x00000000301fc841 ar9300_2p2_soc_postamble 0x000000005ec8075f ar9200_merlin_2p2_radio_core 0x0000000083372ffa ar9300_2p2_baseband_postamble 0x00000000c4f59974 ar9300_2p2_baseband_core 0x00000000e20d2e72 ar9300Modes_high_power_tx_gain_table_2p2 0x000000007fd55c70 ar9300Modes_high_ob_db_tx_gain_table_2p2 0x0000000029495000 ar9300Common_rx_gain_table_2p2 0x0000000042cb1300 ar9300Modes_low_ob_db_tx_gain_table_2p2 0x00000000c4739cd6 ar9300_2p2_mac_core 0x000000003521a300 ar9300Common_wo_xlna_rx_gain_table_2p2 0x00000000a15ccf1b ar9300_2p2_soc_preamble 0x0000000029734396 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2 0x000000002d834396 ar9300PciePhy_clkreq_enable_L1_2p2 0x0000000029834396 ar9300PciePhy_clkreq_disable_L1_2p2 $ ./initvals -f ar9003-2p2 | sha1sum 0ceddb5cf66737610fb51f04cf3e9ff71870c7b4 - Cc: stable@kernel.org Cc: Yixiang Li <yixiang.li@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25cfg80211: fix regression on processing country IEsLuis R. Rodriguez
The patch 4f366c5: wireless: only use alpha2 regulatory information from country IE removed some complex intersection we were always doing between the AP's country IE info and what we got from CRDA. When CRDA sent us back a regulatory domain we would do some sanity checks on that regulatory domain response we just got. Part of these sanity checks included checking that we already had performed an intersection for the request of NL80211_REGDOM_SET_BY_COUNTRY_IE type. This mean that cfg80211 was only processing country IEs for cases where we already had an intersection, but since we removed enforcing this this is no longer required, we should just apply the country IE country hint with the data received from CRDA. This patch has fixes intended for kernels >= 2.6.36. Cc: stable@kernel.org Reported-by: Easwar Krishnan <easwar.krishnan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix memory leak issue in async cmd macro wrappersChristian Lamparter
This patch continues where the previous commit: "carl9170: fix async command buffer leak" left off. Similar to carl9170_reboot/carl9170_powersave, the carl9170_async_regwrite* macros would leak the temporary command buffer, if __carl9170_exec_cmd fails to upload the command to the device. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25mac80211: don't sanitize invalid ratesChristian Lamparter
I found this bug while poking around with a pure-gn AP. Commit: cfg80211/mac80211: Use more generic bitrate mask for rate control Added some sanity checks to ensure that each tx rate index is included in the configured mask and it would change any rate indexes if it wasn't. But, the current implementation doesn't take into account that the invalid rate index "-1" has a special meaning (= no further attempts) and it should not be "changed". Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix async command buffer leakChristian Lamparter
If __carl9170_exec_cmd fails to upload an asynchronous command to the device, the functions: carl9170_reboot and carl9170_powersave will leak the temporary command assembly buffer. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath5k: Properly initialize ath_common->cc_lock.Ben Greear
Otherwise, lockdep splats, at the least: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 0, comm: swapper Not tainted 2.6.36-rc8-wl+ #32 Call Trace: [<c075d940>] ? printk+0xf/0x17 [<c045507a>] register_lock_class+0x5a/0x29e [<c0456af5>] __lock_acquire+0xa2/0xb8c [<c0455be2>] ? mark_lock+0x1e/0x1de [<c041a540>] ? acpi_get_override_irq+0x85/0x8c [<c0455536>] ? trace_hardirqs_off+0xb/0xd [<c0457639>] lock_acquire+0x5a/0x78 [<f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k] [<c075f6ed>] _raw_spin_lock_bh+0x20/0x2f [<f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k] [<f8126835>] ath5k_ani_calibration+0x24/0x52b [ath5k] [<c0438f99>] ? tasklet_action+0x3b/0xc6 [<f8123c2b>] ath5k_tasklet_ani+0x18/0x22 [ath5k] [<c0438fd1>] tasklet_action+0x73/0xc6 [<c043945f>] __do_softirq+0x86/0x111 [<c0439520>] do_softirq+0x36/0x5a [<c0439659>] irq_exit+0x35/0x69 [<c0403fb9>] do_IRQ+0x86/0x9a [<c04034ee>] common_interrupt+0x2e/0x40 [<c045007b>] ? do_adjtimex+0x223/0x55e [<c0408245>] ? mwait_idle+0x5c/0x6c [<c040227f>] cpu_idle+0x4e/0x6b [<c074b6e9>] rest_init+0x8d/0x92 [<c09758ea>] start_kernel+0x320/0x325 [<c09750d0>] i386_start_kernel+0xd0/0xd7 Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: Properly initialize ath_common->cc_lock.Ben Greear
Otherwise, lockdep splats, at the least: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2240, comm: ip Not tainted 2.6.36-rc8-wl+ #32 Call Trace: [<c075d940>] ? printk+0xf/0x17 [<c045507a>] register_lock_class+0x5a/0x29e [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0456af5>] __lock_acquire+0xa2/0xb8c [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0457639>] lock_acquire+0x5a/0x78 [<f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k] [<c075f602>] _raw_spin_lock_irqsave+0x2f/0x3f [<f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k] [<f8c5115b>] ath9k_config+0x274/0x3d8 [ath9k] [<f8c0ba2e>] ieee80211_hw_config+0x11b/0x125 [mac80211] [<f8c17edf>] ieee80211_do_open+0x3c5/0x466 [mac80211] [<f8c171d6>] ? ieee80211_check_concurrent_iface+0x21/0x13a [mac80211] [<f8c17fdb>] ieee80211_open+0x5b/0x5e [mac80211] [<c06ce76b>] __dev_open+0x80/0xae [<c06cc99b>] __dev_change_flags+0xa0/0x115 [<c06ce6bf>] dev_change_flags+0x13/0x3f [<c06d7e78>] do_setlink+0x23a/0x51b [<c0455037>] ? register_lock_class+0x17/0x29e [<c06d847c>] rtnl_newlink+0x269/0x431 [<c06d8291>] ? rtnl_newlink+0x7e/0x431 [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0455de9>] ? mark_held_locks+0x47/0x5f [<c075ebcf>] ? __mutex_lock_common+0x2bb/0x2d6 [<c0456045>] ? trace_hardirqs_on_caller+0x104/0x125 [<c075ebe0>] ? __mutex_lock_common+0x2cc/0x2d6 [<c06d8213>] ? rtnl_newlink+0x0/0x431 [<c06d79e2>] rtnetlink_rcv_msg+0x182/0x198 [<c06d7860>] ? rtnetlink_rcv_msg+0x0/0x198 [<c06e503c>] netlink_rcv_skb+0x30/0x77 [<c06d7859>] rtnetlink_rcv+0x1b/0x22 [<c06e4e77>] netlink_unicast+0xbe/0x119 [<c06e5a15>] netlink_sendmsg+0x234/0x24c [<c06bf93a>] __sock_sendmsg+0x51/0x5a [<c06bfba4>] sock_sendmsg+0x93/0xa7 [<c04968cf>] ? might_fault+0x47/0x81 [<c0496904>] ? might_fault+0x7c/0x81 [<c06c7904>] ? copy_from_user+0x8/0xa [<c06c7c2d>] ? verify_iovec+0x3e/0x6d [<c06bfd8c>] sys_sendmsg+0x149/0x193 [<c0455037>] ? register_lock_class+0x17/0x29e [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0498d7a>] ? __do_fault+0x1fc/0x3a5 [<c048690a>] ? unlock_page+0x40/0x43 [<c0498ef7>] ? __do_fault+0x379/0x3a5 [<c04576dd>] ? lock_release_non_nested+0x86/0x1d8 [<c04968cf>] ? might_fault+0x47/0x81 [<c04968cf>] ? might_fault+0x47/0x81 [<c06c148b>] sys_socketcall+0x15e/0x1a5 [<c0402f1c>] sysenter_do_call+0x12/0x38 Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25mac80211: cancel restart_work explicitly instead of depending on ↵Tejun Heo
flush_scheduled_work() iee80211_hw->restart_work is the only work which uses the system workqueue. Instead of calling flush_scheduled_work() during iee80211_exit(), cancel the work during unregistration. This is to prepare for the deprecation and removal of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-10-02 19:04:27 +0000