summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-01ipv6: add missing netconf notif when 'all' is updatedNicolas Dichtel
The 'default' value was not advertised. Fixes: f3a1bfb11ccb ("rtnl/ipv6: use netconf msg to advertise forwarding status") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01Merge branch 'thunderx-fixes'David S. Miller
Sunil Goutham says: ==================== net: thunderx: Fixes for TSO offload issues This patch series fixes couple of issues w.r.t HW TSO offload ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: thunderx: Fix for issues with multiple CQEs posted for a TSO packetSunil Goutham
On ThunderX 88xx pass 2.x chips when TSO is offloaded to HW, HW posts a CQE for every TSO segment transmitted. Current code does handles this, but is prone to issues when segment sizes are small resulting in SW processing too many CQEs and also at times frees a SKB which is not yet transmitted. This patch handles the errata in a different way and eliminates issues with earlier approach, TSO packet is submitted to HW with post_cqe=0, so that no CQE is posted upon completion of transmission of TSO packet but a additional HDR + IMMEDIATE descriptors are added to SQ due to which a CQE is posted and will have required info to be used while cleanup in napi. This way only one CQE is posted for a TSO packet. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: thunderx: Fix for HW issue while padding TSO packetSunil Goutham
There is a issue in HW where-in while sending GSO sized pkts as part of TSO, if pkt len falls below configured min packet size i.e 60, NIC will zero PAD packet and also updates IP total length. Hence set this value to lessthan min pkt size of MAC + IP + TCP headers, BGX will anyway do the padding to transmit 64 byte pkt including FCS. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01i40e: Fix kernel panic on enable/disable LLDPDave Ertman
If DCB is configured on the link partner switch with an unsupported traffic class configuration (e.g. non-contiguous TCs), the driver is flagging DCB as disabled. But, for future DCB LLDPDUs, the driver was checking if the interface was DCB capable instead of enabled. This was causing a kernel panic when LLDP was enabled/disabled on the link partner switch. This patch corrects the situation by having the LLDP event handler check the correct flag in the pf structure. It also cleans up the setting and clearing of the enabled flag for other checks. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01MAINTAINERS: update to working email addressAndy Gospodarek
Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01Merge tag 'wireless-drivers-for-davem-2016-08-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.8 ath9k * fix regression in client mode beacon configuration * fix a station pointer which resulted in spurious crashes mwifiex * fix large amsdu packets causing firmware hang brcmfmac * fix deadlock when removing interface * fix use of mutex in atomic context ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01irqchip/keystone: Fix typo "sporious" -> "spurious"Colin Ian King
Trivial fix to typo in dev_warn message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lkml.kernel.org/r/20160901104454.26092-1-colin.king@canonical.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-09-01arm64: kernel: do not need to reset UAO on exception entryVladimir Murzin
Commit e19a6ee2460b ("arm64: kernel: Save and restore UAO and addr_limit on exception entry") states that exception handler inherits the original PSTATE.UAO value, so UAO needes to be reset explicitly. However, ARM 8.2 Extension documentation says: PSTATE.UAO is copied to SPSR_ELx.UAO and is then set to 0 on an exception taken from AArch64 to AArch64 so hardware already does the right thing. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-01tipc: fix random link resets while adding a second bearerParthasarathy Bhuvaragan
In a dual bearer configuration, if the second tipc link becomes active while the first link still has pending nametable "bulk" updates, it randomly leads to reset of the second link. When a link is established, the function named_distribute(), fills the skb based on node mtu (allows room for TUNNEL_PROTOCOL) with NAME_DISTRIBUTOR message for each PUBLICATION. However, the function named_distribute() allocates the buffer by increasing the node mtu by INT_H_SIZE (to insert NAME_DISTRIBUTOR). This consumes the space allocated for TUNNEL_PROTOCOL. When establishing the second link, the link shall tunnel all the messages in the first link queue including the "bulk" update. As size of the NAME_DISTRIBUTOR messages while tunnelling, exceeds the link mtu the transmission fails (-EMSGSIZE). Thus, the synch point based on the message count of the tunnel packets is never reached leading to link timeout. In this commit, we adjust the size of name distributor message so that they can be tunnelled. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01tg3: Fix for disallow tx coalescing time to be 0Ivan Vecera
The recent commit 087d7a8c9174 "tg3: Fix for diasllow rx coalescing time to be 0" disallow to set Rx coalescing time to be 0 as this stops generating interrupts for the incoming packets. I found the zero Tx coalescing time stops generating interrupts for outgoing packets as well and fires Tx watchdog later. To avoid this, don't allow to set Tx coalescing time to 0 and also remove subsequent checks that become senseless. Cc: satish.baddipadige@broadcom.com Cc: siva.kallam@broadcom.com Cc: michael.chan@broadcom.com Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01qed: fix kzalloc-simple.cocci warningsWu Fengguang
drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1230:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1192:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset Use kzalloc rather than kmalloc followed by memset with 0 This considers some simple cases that are common and easy to validate Note in particular that there are no ...s in the rule, so all of the matched code has to be contiguous Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci CC: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01Merge branch 'mlxsw-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: couple of fixes Couple of fixes from Ido and myself. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01mlxsw: spectrum: Use existing flood setup when adding VLANsIdo Schimmel
When a VLAN is added on a bridge port we should use the existing unicast flood configuration of the port instead of assuming it's enabled. Fixes: 0293038e0c36 ("mlxsw: spectrum: Add support for flood control") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01mlxsw: spectrum: Don't take multiple references on a FIDIdo Schimmel
In commit 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") I added a per-FID struct, which member ports can take a reference on upon VLAN membership configuration. However, sometimes only the VLAN flags (e.g. egress untagged) are toggled without changing the VLAN membership. In these cases we shouldn't take another reference on the FID. Fixes: 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01mlxsw: spectrum_router: Fix netevent notifier registrationJiri Pirko
Currently the notifier is registered for every asic instance, however the same block. Fix this by moving the registration to module init. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01mlxsw: spectrum: Fix error path in mlxsw_sp_module_initJiri Pirko
Add forgotten notifier unregister. Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01mlxsw: spectrum_router: Fix fib entry update pathJiri Pirko
Originally, I expected that there would be needed to call update operation in case RALUE record action is changed. However, that is not needed since write operation takes care of that nicely. Remove prepared construct and always call the write operation. Fixes: 61c503f976b5 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01mlxsw: spectrum_router: Fix failure caused by double fib removal from HWJiri Pirko
In mlxsw we squash tables 254 and 255 together into HW. Kernel adds/dels /32 ip to/from both 254 and 255. On del path, that causes the same prefix being removed twice. Fix this by introducing reference counting for private mlxsw fib entries. That required a bit of code reshuffle. Also put dev into fib entry key so the same prefix could be represented once per every router interface. Fixes: 61c503f976b5 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01Merge branch 'linus' into smp/hotplugThomas Gleixner
Apply upstream changes to avoid conflicts with pending patches.
2016-09-01perf probe: Move dwarf specific functions to dwarf-aux.cRavi Bangoria
Move generic dwarf related functions from util/probe-finder.c to util/dwarf-aux.c. Functions name and their prototype are also changed accordingly. No functionality changes. Suggested-and-Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1472546377-25612-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf uprobe: Skip prologue if program compiled without optimizationRavi Bangoria
The function prologue prepares stack and registers before executing function logic. When target program is compiled without optimization, function parameter information is only valid after the prologue. When we probe entrypc of the function, and try to record a function parameter, it contains a garbage value. For example: $ vim test.c #include <stdio.h> void foo(int i) { printf("i: %d\n", i); } int main() { foo(42); return 0; } $ gcc -g test.c -o test $ objdump -dl test | less foo(): /home/ravi/test.c:4 400536: 55 push %rbp 400537: 48 89 e5 mov %rsp,%rbp 40053a: 48 83 ec 10 sub -bashx10,%rsp 40053e: 89 7d fc mov %edi,-0x4(%rbp) /home/ravi/test.c:5 400541: 8b 45 fc mov -0x4(%rbp),%eax ... ... main(): /home/ravi/test.c:9 400558: 55 push %rbp 400559: 48 89 e5 mov %rsp,%rbp /home/ravi/test.c:10 40055c: bf 2a 00 00 00 mov -bashx2a,%edi 400561: e8 d0 ff ff ff callq 400536 <foo> $ perf probe -x ./test 'foo i' $ cat /sys/kernel/debug/tracing/uprobe_events p:probe_test/foo /home/ravi/test:0x0000000000000536 i=-12(%sp):s32 $ perf record -e probe_test:foo ./test $ perf script test 5778 [001] 4918.562027: probe_test:foo: (400536) i=0 Here variable 'i' is passed via stack which is pushed on stack at 0x40053e. But we are probing at 0x400536. To resolve this issues, we need to probe on next instruction after prologue. gdb and systemtap also does same thing. I've implemented this patch based on approach systemtap has used. After applying patch: $ perf probe -x ./test 'foo i' $ cat /sys/kernel/debug/tracing/uprobe_events p:probe_test/foo /home/ravi/test:0x0000000000000541 i=-4(%bp):s32 $ perf record -e probe_test:foo ./test $ perf script test 6300 [001] 5877.879327: probe_test:foo: (400541) i=42 No need to skip prologue for optimized case since debug info is correct for each instructions for -O2 -g. For more details please visit: https://bugzilla.redhat.com/show_bug.cgi?id=612253#c6 Changes in v2: - Skipping prologue only when any ARG is either C variable, $params or $vars. - Probe on line(:1) may not be always possible. Recommend only address to force probe on function entry. Committer notes: Testing it with 'perf trace': # perf probe -x ./test foo i Added new event: probe_test:foo (on foo in /home/acme/c/test with i) You can now use it in all perf tools, such as: perf record -e probe_test:foo -aR sleep 1 # cat /sys/kernel/debug/tracing/uprobe_events p:probe_test/foo /home/acme/c/test:0x0000000000000526 i=-12(%sp):s32 # trace --no-sys --event probe_*:* ./test i: 42 0.000 probe_test:foo:(400526) i=0) # After the patch: # perf probe -d *:* Removed event: probe_test:foo # perf probe -x ./test foo i Target program is compiled without optimization. Skipping prologue. Probe on address 0x400526 to force probing at the function entry. Added new event: probe_test:foo (on foo in /home/acme/c/test with i) You can now use it in all perf tools, such as: perf record -e probe_test:foo -aR sleep 1 # cat /sys/kernel/debug/tracing/uprobe_events p:probe_test/foo /home/acme/c/test:0x0000000000000531 i=-4(%bp):s32 # trace --no-sys --event probe_*:* ./test i: 42 0.000 probe_test:foo:(400531) i=42) # Reported-by: Michael Petlan <mpetlan@redhat.com> Report-Link: https://www.mail-archive.com/linux-perf-users@vger.kernel.org/msg02348.html Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1299021 Link: http://lkml.kernel.org/r/1470214725-5023-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com [ Rename 'die' to 'cu_die' to avoid shadowing a die() definition on at least centos 5, Debian 7 and ubuntu:12.04.5] [ Use PRIx64 instead of lx to format a Dwarf_Addr, aka long long unsigned int, fixing the build on 32-bit systems ] [ dwarf_getsrclines() expects a size_t * argument ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf probe: Add helper function to check if probe with variableRavi Bangoria
Introduce helper function instead of inline code and replace hardcoded strings "$vars" and "$params" with their corresponding macros. perf_probe_with_var() is not declared as static since it will be called from different file in subsequent patch. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1470214725-5023-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf symbols: Fixup symbol sizes before picking best onesArnaldo Carvalho de Melo
When we call symbol__fixup_duplicate() we use algorithms to pick the "best" symbols for cases where there are various functions/aliases to an address, and those check zero size symbols, which, before calling symbol__fixup_end() are _all_ symbols in a just parsed kallsyms file. So first fixup the end, then fixup the duplicates. Found while trying to figure out why 'perf test vmlinux' failed, see the output of 'perf test -v vmlinux' to see cases where the symbols picked as best for vmlinux don't match the ones picked for kallsyms. Cc: Anton Blanchard <anton@samba.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 694bf407b061 ("perf symbols: Add some heuristics for choosing the best duplicate symbol") Link: http://lkml.kernel.org/n/tip-rxqvdgr0mqjdxee0kf8i2ufn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf symbols: Check symbol_conf.allow_aliases for kallsyms loading tooArnaldo Carvalho de Melo
We can allow aliases to be kept, but we were checking this just when loading vmlinux files, be consistent, do it for any symbol table loading code that calls symbol__fixup_duplicate() by making this function check .allow_aliases instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 680d926a8cb0 ("perf symbols: Allow symbol alias when loading map for symbol name") Link: http://lkml.kernel.org/n/tip-z0avp0s6cfjckc4xj3pdfjdz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf test vmlinux: Tolerate symbol aliasesArnaldo Carvalho de Melo
The algorithms used to prune aliases in symbols__fixup_duplicate() uses information available on ELF symtabs that are not present on /proc/kallsyms, so it picks different aliases as "best" for vmlinux and kallsyms. We could probably improve a bit this by having a list of aliases for the "best" symbols picked, instead of throwing this info, but that is left for when we find a real need. With this, 'perf test vmlinux' passes: # perf test -F 1 1: vmlinux symtab matches kallsyms: Ok # When we ask for verbose mode, we can see those warning: # perf test -F -v 1 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.8.0-rc4+/build/vmlinux for symbols WARN: 0xffffffffb7001000: diff name v: xen_hypercall_set_trap_table k: hypercall_page WARN: 0xffffffffb7077970: diff end addr for aesni_gcm_dec v: 0xffffffffb707a2f2 k: 0xffffffffb7077a02 WARN: 0xffffffffb707a300: diff end addr for aesni_gcm_enc v: 0xffffffffb707cc03 k: 0xffffffffb707a392 WARN: 0xffffffffb707f950: diff end addr for aesni_gcm_enc_avx_gen2 v: 0xffffffffb7084ef6 k: 0xffffffffb707f9c3 WARN: 0xffffffffb7084f00: diff end addr for aesni_gcm_dec_avx_gen2 v: 0xffffffffb708a691 k: 0xffffffffb7084f73 WARN: 0xffffffffb708aa10: diff end addr for aesni_gcm_enc_avx_gen4 v: 0xffffffffb708f844 k: 0xffffffffb708aa83 WARN: 0xffffffffb708f850: diff end addr for aesni_gcm_dec_avx_gen4 v: 0xffffffffb709486f k: 0xffffffffb708f8c3 WARN: 0xffffffffb71a6e50: diff name v: perf_pmu_commit_txn.part.98 k: perf_pmu_cancel_txn.part.97 WARN: 0xffffffffb752e480: diff name v: wakeup_expire_count_show.part.5 k: wakeup_active_count_show.part.7 WARN: 0xffffffffb76e8d00: diff name v: phys_switch_id_show.part.11 k: phys_port_name_show.part.12 WARN: Maps only in vmlinux: ffffffffb7d7d000-ffffffffb7eeaac8 117d000 [kernel].init.text ffffffffb7eeaac8-ffffffffc03ad000 12eaac8 [kernel].exit.text ---- end ---- vmlinux symtab matches kallsyms: Ok # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-6v5w1k8rpx4ggczlkw730vt0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf test vmlinux: Avoid printing headers for empty listsArnaldo Carvalho de Melo
Before: # perf test -F -v 1 1: vmlinux symtab matches kallsyms: --- start --- <SNIP> WARN: Maps only in vmlinux: ffffffffb7d7d000-ffffffffb7eeaac8 117d000 [kernel].init.text ffffffffb7eeaac8-ffffffffc03ad000 12eaac8 [kernel].exit.text WARN: Maps in vmlinux with a different name in kallsyms: WARN: Maps only in kallsyms: ---- end ---- vmlinux symtab matches kallsyms: Ok # The two last WARN lines are now suppressed, since there are no such cases detected. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9ww8uvzl682ykaw8ht1tozlr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf test vmlinux: Clarify which -v lines are errors or warningArnaldo Carvalho de Melo
When the 'perf test -v vmlinux' test fails, it is not clear which of the lines are errors or warnings, clarify that adding ERR/WARN prefixes: # perf test -F -v 1 1: vmlinux symtab matches kallsyms : --- start --- Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.8.0-rc4+/build/vmlinux for symbols ERR : 0xffffffffb7001000: diff name v: xen_hypercall_set_trap_table k: hypercall_page WARN: 0xffffffffb7077970: diff end addr for aesni_gcm_dec v: 0xffffffffb707a2f2 k: 0xffffffffb7077a02 WARN: 0xffffffffb707a300: diff end addr for aesni_gcm_enc v: 0xffffffffb707cc03 k: 0xffffffffb707a392 WARN: 0xffffffffb707f950: diff end addr for aesni_gcm_enc_avx_gen2 v: 0xffffffffb7084ef6 k: 0xffffffffb707f9c3 WARN: 0xffffffffb7084f00: diff end addr for aesni_gcm_dec_avx_gen2 v: 0xffffffffb708a691 k: 0xffffffffb7084f73 WARN: 0xffffffffb708aa10: diff end addr for aesni_gcm_enc_avx_gen4 v: 0xffffffffb708f844 k: 0xffffffffb708aa83 WARN: 0xffffffffb708f850: diff end addr for aesni_gcm_dec_avx_gen4 v: 0xffffffffb709486f k: 0xffffffffb708f8c3 ERR : 0xffffffffb71a6e50: diff name v: perf_pmu_commit_txn.part.98 k: perf_pmu_cancel_txn.part.97 ERR : 0xffffffffb752e480: diff name v: wakeup_expire_count_show.part.5 k: wakeup_active_count_show.part.7 ERR : 0xffffffffb76e8d00: diff name v: phys_switch_id_show.part.11 k: phys_port_name_show.part.12 WARN: Maps only in vmlinux: ffffffffb7d7d000-ffffffffb7eeaac8 117d000 [kernel].init.text ffffffffb7eeaac8-ffffffffc03ad000 12eaac8 [kernel].exit.text WARN: Maps in vmlinux with a different name in kallsyms: WARN: Maps only in kallsyms: ---- end ---- vmlinux symtab matches kallsyms: FAILED! # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-n5ml8m7y9x8kzvxt09ipku88@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf probe: Ignore vmlinux Build-id when offline vmlinux givenMasami Hiramatsu
Ignore vmlinux build-id when user gives offline vmlinux if the command does not affect running kernel. perf-probe has several actions some of them does not change the running kernel, like --lines, --vars, and --funcs. e.g. ----- $ ./perf probe -k ./vmlinux-arm -V do_sys_open:14 Available variables at do_sys_open:14 @<do_sys_open+202> char* filename int dfd int fd int flags struct filename* tmp struct open_flags op umode_t mode ----- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/147222347320.5088.2582658035296667520.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf probe: Support probing on offline cross-arch binaryMasami Hiramatsu
Support probing on offline cross-architecture binary by adding getting the target machine arch from ELF and choose correct register string for the machine. Here is an example: ----- $ perf probe --vmlinux=./vmlinux-arm --definition 'do_sys_open $params' p:probe/do_sys_open do_sys_open+0 dfd=%r5:s32 filename=%r1:u32 flags=%r6:s32 mode=%r3:u16 ----- Here, we can get probe/do_sys_open from above and append it to to the target machine's tracing/kprobe_events file in the tracefs mountput, usually /sys/kernel/debug/tracing/kprobe_events (or /sys/kernel/tracing/kprobe_events). Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/147214229717.23638.6440579792548044658.stgit@devbox [ Add definition for EM_AARCH64 to fix the build on at least centos 6, debian 7 & ubuntu 12.04.5 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01btrfs: fix one bug that process may endlessly wait for ticket in ↵Wang Xiaoguang
wait_reserve_ticket() If can_overcommit() in btrfs_calc_reclaim_metadata_size() returns true, btrfs_async_reclaim_metadata_space() will not reclaim metadata space, just return directly and also forget to wake up process which are waiting for their tickets, so these processes will wait endlessly. Fstests case generic/172 with mount option "-o compress=lzo" have revealed this bug in my test machine. Here if we have tickets to handle, we must handle them first. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-01Btrfs: fix endless loop in balancing block groupsLiu Bo
Qgroup function may overwrite the saved error 'err' with 0 in case quota is not enabled, and this ends up with a endless loop in balance because we keep going back to balance the same block group. It really should use 'ret' instead. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-01Btrfs: kill invalid ASSERT() in process_all_refs()Josef Bacik
Suppose you have the following tree in snap1 on a file system mounted with -o inode_cache so that inode numbers are recycled └── [ 258] a └── [ 257] b and then you remove b, rename a to c, and then re-create b in c so you have the following tree └── [ 258] c └── [ 257] b and then you try to do an incremental send you will hit ASSERT(pending_move == 0); in process_all_refs(). This is because we assume that any recycling of inodes will not have a pending change in our path, which isn't the case. This is the case for the DELETE side, since we want to remove the old file using the old path, but on the create side we could have a pending move and need to do the normal pending rename dance. So remove this ASSERT() and put a comment about why we ignore pending_move. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-01Merge tag 'iwlwifi-for-kalle-2016-08-29' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * Fix P2P dump trigger * Prevent a potential null dereference in iwlmvm * Prevent an uninitialized value from being returned in iwlmvm * Advertise support for channel width change in AP mode
2016-09-01PCI: Mark Haswell Power Control Unit as having non-compliant BARsBjorn Helgaas
The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) where BAR 0 is supposed to be. This is erratum HSE43 in the spec update referenced below: The PCIe* Base Specification indicates that Configuration Space Headers have a base address register at offset 0x10. Due to this erratum, the Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function 3; Offset 0x10) is located where a base register is expected. Mark the PCU as having non-compliant BARs so we don't try to probe any of them. There are no other BARs on this device. Rename the quirk so it's not Broadwell-specific. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-datasheet-vol-2.html (section 5.4, Device 30 Function 3) Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Myron Stowe <myron.stowe@redhat.com>
2016-09-01arm64: debug: convert OS lock CPU hotplug notifier to new infrastructureWill Deacon
The arm64 debug monitor initialisation code uses a CPU hotplug notifier to clear the OS lock when CPUs come online. This patch converts the code to the new hotplug mechanism. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-01arm64: hw_breakpoint: convert CPU hotplug notifier to new infrastructureWill Deacon
The arm64 hw_breakpoint implementation uses a CPU hotplug notifier to reset the {break,watch}point registers when CPUs come online. This patch converts the code to the new hotplug mechanism, whilst moving the invocation earlier to remove the need to disable IRQs explicitly in the driver (which could cause havok if we trip a watchpoint in an IRQ handler whilst restoring the debug register state). Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-01perf probe: Ignore vmlinux buildid if offline kernel is givenMasami Hiramatsu
Ignore the buildid of running kernel when both of --definition and --vmlinux is given because that kernel should be off-line. This also skips post-processing of kprobe event for relocating symbol and checking blacklist, because it can not be done on off-line kernel. E.g. without this fix perf shows an error as below ---- $ perf probe --vmlinux=./vmlinux-arm --definition do_sys_open ./vmlinux-arm with build id 7a1f76dd56e9c4da707cd3d6333f50748141434b not found, continuing without symbols Failed to find symbol do_sys_open in kernel Error: Failed to add events. ---- with this fix, we can get the definition ---- $ perf probe --vmlinux=./vmlinux-arm --definition do_sys_open p:probe/do_sys_open do_sys_open+0 ---- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/147214228193.23638.12581984840822162131.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf probe: Show trace event definitionMasami Hiramatsu
Add --definition/-D option for showing the trace-event definition in stdout. This can be useful in debugging or combined with a shell script. e.g. ---- # perf probe --definition 'do_sys_open $params' p:probe/do_sys_open _text+2261728 dfd=%di:s32 filename=%si:u64 flags=%dx:s32 mode=%cx:u16 ---- Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/147214226712.23638.2240534040014013658.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf config: Show default report configuration in example and docsMilian Wolff
Signed-off-by: Milian Wolff <milian.wolff@kdab.com> LPU-Reference: 20160830134106.21240-2-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf symbols: Demangle symbols for synthesized @plt entries.Milian Wolff
The symbols in the synthesized @plt entries where not demangled before, i.e. we could end up with entries such as: $ perf report Samples: 7K of event 'cycles:ppp', Event count (approx.): 6223833141 Children Self Command Shared Object Symbol - 93.63% 28.89% lab_mandelbrot lab_mandelbrot [.] main - 73.81% main - 33.57% hypot 27.76% __hypot_finite 15.97% __muldc3 2.90% __muldc3@plt 2.40% _ZNK6QImage6heightEv@plt + 2.14% QColor::rgb 1.94% _ZNK6QImage5widthEv@plt 1.92% cabs@plt This patch remedies this issue by also applying demangling to the synthesized symbols. The output for the above is now: $ perf report Samples: 7K of event 'cycles:ppp', Event count (approx.): 6223833141 Children Self Command Shared Object Symbol - 93.63% 28.89% lab_mandelbrot lab_mandelbrot [.] main - 73.81% main - 33.57% hypot 27.76% __hypot_finite 15.97% __muldc3 2.90% __muldc3@plt 2.40% QImage::height() const@plt + 2.14% QColor::rgb 1.94% QImage::width() const@plt 1.92% cabs@plt Signed-off-by: Milian Wolff <milian.wolff@kdab.com> LPU-Reference: 20160830114102.30863-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf probe: Do not use map_load filters for functionArnaldo Carvalho de Melo
It is simpler to just do the loop, no need for globals and the last user of such facility disappears. Testing: # perf probe -F [a-z]*recvmsg aead_recvmsg compat_SyS_recvmsg compat_sys_recvmsg hash_recvmsg inet_recvmsg kernel_recvmsg netlink_recvmsg packet_recvmsg ping_recvmsg raw_recvmsg rawv6_recvmsg rng_recvmsg security_socket_recvmsg selinux_socket_recvmsg skcipher_recvmsg sock_common_recvmsg sock_no_recvmsg sock_recvmsg sys_recvmsg tcp_recvmsg udp_recvmsg udpv6_recvmsg unix_dgram_recvmsg unix_seqpacket_recvmsg unix_stream_recvmsg # Without filters: # perf probe -F | tail -5 zswap_pool_create zswap_pool_current zswap_update_total_size zswap_writeback_entry zswap_zpool_param_set # # perf probe -F | wc -l 33311 # Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160831130427.GA13095@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01arm64: remove duplicate macro __KERNEL__ checkzijun_hu
remove duplicate macro __KERNEL__ check Signed-off-by: zijun_hu <zijun_hu@htc.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-01ovl: update docMiklos Szeredi
Some of the documented quirks no longer apply. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: listxattr: use strnlen()Miklos Szeredi
Be defensive about what underlying fs provides us in the returned xattr list buffer. If it's not properly null terminated, bail out with a warning insead of BUG. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-09-01ovl: Switch to generic_getxattrAndreas Gruenbacher
Now that overlayfs has xattr handlers for iop->{set,remove}xattr, use those same handlers for iop->getxattr as well. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: copyattr after setting POSIX ACLMiklos Szeredi
Setting POSIX acl may also modify the file mode, so need to copy that up to the overlay inode. Reported-by: Eryu Guan <eguan@redhat.com> Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: Switch to generic_removexattrAndreas Gruenbacher
Commit d837a49bd57f ("ovl: fix POSIX ACL setting") switches from iop->setxattr from ovl_setxattr to generic_setxattr, so switch from ovl_removexattr to generic_removexattr as well. As far as permission checking goes, the same rules should apply in either case. While doing that, rename ovl_setxattr to ovl_xattr_set to indicate that this is not an iop->setxattr implementation and remove the unused inode argument. Move ovl_other_xattr_set above ovl_own_xattr_set so that they match the order of handlers in ovl_xattr_handlers. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: Get rid of ovl_xattr_noacl_handlers arrayAndreas Gruenbacher
Use an ordinary #ifdef to conditionally include the POSIX ACL handlers in ovl_xattr_handlers, like the other filesystems do. Flag the code that is now only used conditionally with __maybe_unused. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: Fix OVL_XATTR_PREFIXAndreas Gruenbacher
Make sure ovl_own_xattr_handler only matches attribute names starting with "overlay.", not "overlayXXX". Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-20 20:56:49 +0000