| Age | Commit message (Collapse) | Author |
|---|
|
Daniel Golle says:
====================
net: phy: realtek: fix status when link is down
The .read_status method for RealTek RTL822x PHYs (both C22 and C45) has
multilpe issues which result in reporting bogus link partner advertised
modes as well as speed and duplex while the link is down and no cable
is plugged in.
Example: ethtool after disconnecting a 1000M/Full capable link partner,
now with no wire plugged:
Settings for lan1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 1000baseT/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
Port: Twisted Pair
PHYAD: 7
Transceiver: external
MDI-X: Unknown
Supports Wake-on: d
Wake-on: d
Link detected: no
Fix this by making sure all of the fields populated by
rtl822x_c45_read_status() or rtl822x_read_status() get reset, also in
case the link is down.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clear NBase-T link partner advertisement before calling
rtlgen_read_status() to avoid phy_resolve_aneg_linkmode() wrongly
setting speed and duplex.
This fixes bogus 2.5G/5G/10G link partner advertisement and thus
speed and duplex being set by phy_resolve_aneg_linkmode() due to stale
NBase-T lpa.
Fixes: 68d5cd09e891 ("net: phy: realtek: change order of calls in C22 read_status()")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rtlgen_decode_physr() which sets master_slave_state isn't called in case
the link is down and other than rtlgen_read_status(),
rtl822x_c45_read_status() doesn't implicitely clear master_slave_state.
Avoid stale master_slave_state by always setting it to
MASTER_SLAVE_STATE_UNKNOWN in rtl822x_c45_read_status() in case the link
is down.
Fixes: 081c9c0265c9 ("net: phy: realtek: read duplex and gbit master from PHYSR register")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only read 1000Base-T link partner advertisement if autonegotiation has
completed and otherwise 1000Base-T link partner advertisement bits.
This fixes bogus 1000Base-T link partner advertisement after link goes
down (eg. by disconnecting the wire).
Fixes: 5cb409b3960e ("net: phy: realtek: clear 1000Base-T link partner advertisement")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Qualcomm regulator supports two power supply modes: HPM and LPM.
Currently, the sdhci-msm.c driver does not set the load to adjust
the current for eMMC and SD. If the regulator dont't set correct
load in LPM state, it will lead to the inability to properly
initialize eMMC and SD.
Set the correct regulator current for eMMC and SD to ensure that the
device can work normally even when the regulator is in LPM.
Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250114083514.258379-1-quic_yuanjiey@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add check for the return value of clk_enable() to catch the potential
error.
Fixes: 19f1016ea960 ("pwm: stm32: Fix enable count for clk in .probe()")
Signed-off-by: Mingwei Zheng <zmw12306@gmail.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://lore.kernel.org/r/20241215224752.220318-1-zmw12306@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 singleton hotfixes. 6 are MM.
Two are cc:stable and the remainder address post-6.12 issues"
* tag 'mm-hotfixes-stable-2025-01-16-21-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: check dir i_size in ocfs2_find_entry
mailmap: update entry for Ethan Carter Edwards
mm: zswap: move allocations during CPU init outside the lock
mm: khugepaged: fix call hpage_collapse_scan_file() for anonymous vma
mm: shmem: use signed int for version handling in casefold option
alloc_tag: skip pgalloc_tag_swap if profiling is disabled
mm: page_alloc: fix missed updates of lowmem_reserve in adjust_managed_page_count
|
|
Pull smb client fixes from Steve French:
- fix double free when reconnect racing with closing session
- fix SMB1 reconnect with password rotation
* tag '6.13-rc7-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix double free of TCP_Server_Info::hostname
cifs: support reconnect with alternate password for SMB1
|
|
Pull drm fixes from Dave Airlie:
"Final(?) set of fixes for 6.13, I think the holidays finally caught up
with everyone, the misc changes are 2 weeks worth, otherwise amdgpu
and xe are most of it. The largest pieces is a new test so I'm not too
worried about that.
kunit:
- Fix W=1 build for kunit tests
bridge:
- Handle YCbCr420 better in bridge code, with tests
- itee-it6263 error handling fix
amdgpu:
- SMU 13 fix
- DP MST fixes
- DCN 3.5 fix
- PSR fixes
- eDP fix
- VRR fix
- Enforce isolation fixes
- GFX 12 fix
- PSP 14.x fix
xe:
- Add steering info support for GuC register lists
- Add means to wait for reset and synchronous reset
- Make changing ccs_mode a synchronous action
- Add missing mux registers
- Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU
i915:
- Relax clear color alignment to 64 bytes [fb]
v3d:
- Fix warn when unloading v3d
nouveau:
- Fix cross-device fence handling in nouveau
- Fix backlight regression for macbooks 5,1
vmwgfx:
- Fix BO reservation handling in vmwgfx"
* tag 'drm-fixes-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/xe: Mark ComputeCS read mode as UC on iGPU
drm/xe/oa: Add missing VISACTL mux registers
drm/xe: make change ccs_mode a synchronous action
drm/xe: introduce xe_gt_reset and xe_gt_wait_for_reset
drm/xe/guc: Adding steering info support for GuC register lists
drm/bridge: ite-it6263: Prevent error pointer dereference in probe()
drm/v3d: Ensure job pointer is set to NULL after job completion
drm/vmwgfx: Add new keep_resv BO param
drm/vmwgfx: Remove busy_places
drm/vmwgfx: Unreserve BO on error
drm/amdgpu: fix fw attestation for MP0_14_0_{2/3}
drm/amdgpu: always sync the GFX pipe on ctx switch
drm/amdgpu: disable gfxoff with the compute workload on gfx12
drm/amdgpu: Fix Circular Locking Dependency in AMDGPU GFX Isolation
drm/i915/fb: Relax clear color alignment to 64 bytes
drm/amd/display: Disable replay and psr while VRR is enabled
drm/amd/display: Fix PSR-SU not support but still call the amdgpu_dm_psr_enable
nouveau/fence: handle cross device fences properly
drm/tests: connector: Add ycbcr_420_allowed tests
drm/connector: hdmi: Validate supported_formats matches ycbcr_420_allowed
...
|
|
Add simple CPU Freq driver for Airoha EN7581 SoC that control CPU
frequency scaling with SMC APIs and register a generic "cpufreq-dt"
device.
All CPU share the same frequency and can't be controlled independently.
CPU frequency is controlled by the attached PM domain.
Add SoC compatible to cpufreq-dt-plat block list as a dedicated cpufreq
driver is needed with OPP v2 nodes declared in DTS.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Module functions can be set to set_ftrace_filter before the module is
loaded.
# echo :mod:snd_hda_intel > set_ftrace_filter
This will enable all the functions for the module snd_hda_intel. If that
module is not loaded, it is "cached" in the trace array for when the
module is loaded, its functions will be traced.
But this is not implemented in the kernel command line. That's because the
kernel command line filtering is added very early in boot up as it is
needed to be done before boot time function tracing can start, which is
also available very early in boot up. The code used by the
"set_ftrace_filter" file can not be used that early as it depends on some
other initialization to occur first. But some of the functions can.
Implement the ":mod:" feature of "set_ftrace_filter" in the kernel command
line parsing. Now function tracing on just a single module that is loaded
at boot up can be done.
Adding:
ftrace=function ftrace_filter=:mod:sna_hda_intel
To the kernel command line will only enable the sna_hda_intel module
functions when the module is loaded, and it will start tracing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250116175832.34e39779@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Adopt __free() and guard() for trace_fprobe.c to remove gotos.
Link: https://lore.kernel.org/173708043449.319651.12242878905778792182.stgit@mhiramat.roam.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Divya Koppera says:
====================
Add PEROUT library for RDS PTP supported phys
Adds support for PEROUT library, where phy can generate
periodic output signal on supported pin out.
====================
Link: https://patch.msgid.link/20250115090634.12941-1-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
supported Microchip phys
Adds PEROUT feature for RDS PTP supported phys where
we can generate periodic output signal on supported
pin out
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://patch.msgid.link/20250115090634.12941-4-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adds support for enabling pin out that is required
to generate periodic output signal on lan887x phy.
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://patch.msgid.link/20250115090634.12941-3-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This ptp header file library changes will cover PEROUT
macros that are required to generate periodic output
from pin out
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://patch.msgid.link/20250115090634.12941-2-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following tests are failing on debug kernels:
tcp_tcp_info_tcp-info-rwnd-limited.pkt
tcp_tcp_info_tcp-info-sndbuf-limited.pkt
with reports like:
assert 19000 <= tcpi_sndbuf_limited <= 21000, tcpi_sndbuf_limited; \
AssertionError: 18000
and:
assert 348000 <= tcpi_busy_time <= 360000, tcpi_busy_time
AssertionError: 362000
Extend commit 912d6f669725 ("selftests/net: packetdrill: report benign
debug flakes as xfail") to cover them.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250115232129.845884-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: add phylink managed EEE support
Adding managed EEE support to phylink has been on the cards ever since
the idea in phylib was mooted. This overly large series attempts to do
so. I've included all the patches as it's important to get the driver
patches out there.
Patch 1 adds a definition for the clock stop capable bit in the PCS
MMD status register.
Patch 2 adds a phylib API to query whether the PHY allows the transmit
xMII clock to be stopped while in LPI mode. This capability is for MAC
drivers to save power when LPI is active, to allow them to stop their
transmit clock.
Patch 3 extracts a phylink internal helper for determining whether the
link is up.
Patch 4 adds basic phylink managed EEE support. Two new MAC APIs are
added, to enable and disable LPI. The enable method is passed the LPI
timer setting which it is expected to program into the hardware, and
also a flag ehther the transmit clock should be stopped.
I have taken the decision to make enable_tx_lpi() to return an error
code, but not do much with it other than report it - the intention
being that we can later use it to extend functionality if needed
without reworking loads of drivers.
I have also dropped the validation/limitation of the LPI timer, and
left that in the driver code prior to calling phylink_ethtool_set_eee().
The remainder of the patches convert mvneta, lan743x and stmmac, and
add support for mvneta.
====================
Link: https://patch.msgid.link/Z4gdtOaGsBhQCZXn@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert stmmac to use phylink managed EEE support rather than delving
into phylib:
1. Move the stmmac_eee_init() calls out of mac_link_down() and
mac_link_up() methods into the new mac_{enable,disable}_lpi()
methods. We leave the calls to stmmac_set_eee_pls() in place as
these change bits which tell the EEE hardware when the link came
up or down, and is used for a separate hardware timer. However,
symmetrically conditionalise this with priv->dma_cap.eee.
2. Update the current LPI timer each time LPI is enabled - which we
need for software-timed LPI.
3. With phylink managed EEE, phylink manages the receive clock stop
configuration via phylink_config.eee_rx_clk_stop_enable. Set this
appropriately which makes the call to phy_eee_rx_clock_stop()
redundant.
4. From what I can work out, all supported interfaces support LPI
signalling on stmmac (there's no restriction implemented.) It
also appears to support LPI at all full duplex speeds at or over
100M. Set these capabilities.
5. The default timer appears to be derived from a module parameter.
Set this the same, although we keep code that reconfigures the
timer in stmmac_init_phy().
6. Remove the direct call to phy_support_eee(), which phylink will do
on the drivers behalf if phylink_config.eee_enabled_default is set.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAEG-0014QH-9O@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert lan743x to phylink managed EEE:
- Set the lpi_capabilties.
- Move the call to lan743x_mac_eee_enable() into the enable/disable
tx_lpi functions.
- Ensure that EEEEN is clear during probe.
- Move the setting of the LPI timer into mac_enable_tx_lpi().
- Move reading of LPI timer to phylink initialisation to set the
default timer value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAEB-0014QB-4s@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the netdev that we already have in lan743x_phylink_mac_link_down().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAE5-0014Q5-Up@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add EEE support for mvpp2, using phylink's EEE implementation, which
means we just need to implement the two methods for LPI control, and
with the initial configuration. Only SGMII mode is supported, so only
100M and 1G speeds.
Disabling LPI requires clearing a single bit. Enabling LPI needs a full
configuration of several values, as the timer values are dependent on
the MAC operating speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAE0-0014Pz-R9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert mvneta to use phylink's EEE implementation by implementing the
two LPI control methods, and adding the initial configuration and
capabilities.
Although disabling LPI requires clearing a single bit, for safety we
clear the manual mode and force bits to ensure that auto mode will be
used.
Enabling LPI needs a full configuration of several values, as the timer
values are dependent on the MAC operating speed, as per the original
code.
As Armada 388 states that EEE is only supported in "SGMII" modes, mark
this in lpi_interfaces. Testing with RGMII on the Clearfog platform
indicates that the receive path fails to detect LPI over RGMII.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADv-0014Pt-NO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add EEE management to phylink, making use of the phylib implementation.
This will only be used where a MAC driver populates the methods and
capabilities bitfield, otherwise we keep our old behaviour.
Phylink will keep track of the EEE configuration, including the clock
stop abilities at each end of the MAC to PHY link, programming the PHY
appropriately and preserving the LPI configuration should the PHY go
away.
Phylink will call into the MAC driver when LPI needs to be enabled or
disabled, with the requirement that the MAC have LPI disabled prior
to the netdev being brought up (in other words, it will only call
mac_disable_tx_lpi() if it has already called mac_enable_tx_lpi().)
Support for phylink managed EEE is enabled by populating both tx_lpi
MAC operations method pointers, and filling in both LPI interfaces
and capabilities. If the methods are provided but the LPI interfaces
or capabilities remain empty, this indicates to phylink that EEE is
implemented by the driver but the hardware it is driving does not
support EEE, and thus the ethtool set_eee() and get_eee() methods will
return EOPNOTSUPP.
No validation of the LPI timer value is performed by this patch.
For interface modes which do not support LPI, we make no attempt to
manipulate the phylib EEE advertisement, but instead refuse to
activate LPI at the MAC, noting it at debug message level.
We also restrict the advertisement and reported userspace support
linkmode masks according to the lpi_capabilities provided to
phylink by the MAC driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADq-0014Pn-J1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper to determine whether the link is up or down. Currently
this is only used in one location, but becomes necessary to test
when reconfiguring EEE.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADl-0014Ph-EV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for querying whether the PHY allows the transmit xMII clock
to be stopped while in LPI mode. This will be used by phylink to pass
to the MAC driver so it can configure the generation of the xMII clock
appropriately.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADg-0014Pb-AJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a definition for the clock stop capable bit in the PCS MMD. This
bit indicates whether the MAC is able to stop the transmit xMII clock
while it is signalling LPI.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADb-0014PV-6T@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
dev: Covnert dev_change_name() to per-netns RTNL.
Patch 1 adds a missing netdev_rename_lock in dev_change_name()
and Patch 2 removes unnecessary devnet_rename_sem there.
Patch 3 replaces RTNL with rtnl_net_lock() in dev_ifsioc(),
and now dev_change_name() is always called under per-netns RTNL.
Given it's close to -rc8 and Patch 1 touches the trivial unlikely
path, can Patch 1 go into net-next ? Otherwise I'll post Patch 2 & 3
separately in the next cycle.
====================
Link: https://patch.msgid.link/20250115095545.52709-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Basically, dev_ifsioc() operates on the passed single netns (except
for netdev notifier chains with lower/upper devices for which we will
need more changes).
Let's hold rtnl_net_lock() for dev_ifsioc().
Now that NETDEV_CHANGENAME is always triggered under rtnl_net_lock()
of the device's netns. (do_setlink() and dev_ifsioc())
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250115095545.52709-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
devnet_rename_sem is no longer used since commit
0840556e5a3a ("net: Protect dev->name by seqlock.").
Also, RTNL serialises dev_change_name().
Let's remove devnet_rename_sem.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250115095545.52709-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cited commit forgot to add netdev_rename_lock in one of the
error paths in dev_change_name().
Let's hold netdev_rename_lock before restoring the old dev->name.
Fixes: 0840556e5a3a ("net: Protect dev->name by seqlock.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250115095545.52709-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tool pp_alloc_fail.py tested error recovery by injecting errors
into the function page_pool_alloc_pages(). The page pool allocation
function page_pool_dev_alloc() does not end up calling
page_pool_alloc_pages(). page_pool_alloc_netmems() seems to be the
function that is called by all of the page pool alloc functions in
the API, so move error injection to that function instead.
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250115181312.3544-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull io_uring fixes from Jens Axboe:
"One fix for the error handling in buffer cloning, and one fix for the
ring resizing.
Two minor followups for the latter as well.
Both of these issues only affect 6.13, so not marked for stable"
* tag 'io_uring-6.13-20250116' of git://git.kernel.dk/linux:
io_uring/register: cache old SQ/CQ head reading for copies
io_uring/register: document io_register_resize_rings() shared mem usage
io_uring/register: use stable SQ/CQ ring data during resize
io_uring/rsrc: fixup io_clone_buffers() error handling
|
|
Store rtm->rtm_tos in a dscp_t variable, which can then be used for
setting fl4.flowi4_tos and also be passed as parameter of
ip_route_input_rcu().
The .flowi4_tos field is going to be converted to dscp_t to ensure ECN
bits aren't erroneously taken into account during route lookups. Having
a dscp_t variable available will simplify that conversion, as we'll
just have to drop the inet_dscp_to_dsfield() call.
Note that we can't just convert rtm->rtm_tos to dscp_t because this
structure is exported to user space.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/7bc1c7dc47ad1393569095d334521fae59af5bc7.1736944951.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use ip4h_dscp() to get the tunnel DSCP option as dscp_t, instead of
manually masking the raw tos field with INET_DSCP_MASK. This will ease
the conversion of fl4->flowi4_tos to dscp_t, which just becomes a
matter of dropping the inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/6c05a11afdc61530f1a4505147e0909ad51feb15.1736941806.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Several fixes for the new dmem cgroup controller and the HDMI framework
audio support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-bold-furry-perch-b1ca0e@houat
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Add steering info support for GuC register lists (Jesus Narvaez)
- Add means to wait for reset and synchronous reset (Maciej)
- Make changing ccs_mode a synchronous action (Maciej)
- Add missing mux registers (Ashutosh)
- Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU (Matt Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4ll3F1anLEwCvrf@fedora
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a regression in the irqsoff and wakeup latency tracing
The function graph tracer infrastructure has become generic so that
fprobes and BPF can be based on it. As it use to only handle function
graph tracing, it would always calculate the time the function
entered so that it could then calculate the time it exits and give
the length of time the function executed for. But this is not needed
for the other users (fprobes and BPF) and reading the clock adds a
non-negligible overhead, so the calculation was moved into the
function graph tracer logic.
But the irqsoff and wakeup latency tracers, when the "display-graph"
option was set, would use the function graph tracer to calculate the
times of functions during the latency. The movement of the calltime
calculation made the value zero for these tracers, and the output no
longer showed the length of time of each tracer, but instead the
absolute timestamp of when the function returned (rettime - calltime
where calltime is now zero).
Have the irqsoff and wakeup latency tracers also do the calltime
calculation as the function graph tracer does and report the proper
length of the function timings.
- Update the tracing display to reflect the new preempt lazy model
When the system is configured with preempt lazy, the output of the
trace data would state "unknown" for the current preemption model.
Because the lazy preemption model was just added, make it known to
the tracing subsystem too. This is just a one line change.
- Document multiple function graph having slightly different timings
Now that function graph tracer infrastructure is separate, this also
allows the function graph tracer to run in multiple instances (it
wasn't able to do so before). If two instances ran the function graph
tracer and traced the same functions, the timings for them will be
slightly different because each does their own timings and collects
the timestamps differently. Document this to not have people be
confused by it.
* tag 'trace-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Document that multiple function_graph tracing may have different times
tracing: Print lazy preemption model
tracing: Fix irqsoff and wakeup latency tracers when using function graph
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Relax clear color alignment to 64 bytes [fb] (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4fdIVf68qsqIpiN@linux
|
|
In wrpll_configure_for_rate() we try to determine the best PLL
configuration for a target rate. However, in the loop where we try
values of R, we should compare the derived `vco` with `target_vco_rate`.
However, we were in fact comparing it with `target_rate`, which is
actually after Q shift. This is incorrect, and sometimes can result in
suboptimal clock rates. Fix it.
Fixes: 7b9487a9a5c4 ("clk: analogbits: add Wide-Range PLL library")
Signed-off-by: Bo Gan <ganboing@gmail.com>
Link: https://lore.kernel.org/r/20240830061639.2316-1-ganboing@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into for-6.14/block
Pull MD fix from Song.
* tag 'md-6.14-20250116' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
|
|
BCM2712 has an extra clock exposed by the firmware called DISP, and used
by (at least) the HVS. Let's add it to the list of clocks to register in
Linux.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-5-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The RaspberryPi firmware clocks driver uses in several instances a
container_of to retrieve the struct raspberrypi_clk_data from a pointer
to struct clk_hw. Let's create a small function to avoid duplicating it
all over the place.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-4-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
There isn't a reason not to minimise the clocks, and it saves
some power.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-3-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
For performance/power it is beneficial to adjust gpu clocks with arm clock.
This is how the downstream cpufreq driver works
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-2-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The ISP clock can be controlled by the driver, so register it
with the clock subsystem.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-1-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Recovery Mode is intended to recover from a fatal failure scenario in
which the device is not accessible to the host, meaning the firmware is
non-responsive.
The purpose of the Firmware Recovery Mode is to enable software tools to
update firmware and/or device configuration so the fatal error can be
resolved.
Recovery Mode Firmware supports a limited set of admin commands required
for NVM update.
Recovery Firmware does not support hardware interrupts so a polling mode
is used.
The driver will expose only the minimum set of devlink commands required
for the recovery of the adapter.
Using an appropriate NVM image, the user can recover the adapter using
the devlink flash API.
Prior to 4.20 E810 Adapter Recovery Firmware supports only the update
and erase of the "fw.mgmt" component.
E810 Adapter Recovery Firmware doesn't support selected preservation of
cards settings or identifiers.
The following command can be used to recover the adapter:
$ devlink dev flash <pci-address> <update-image.bin> component fw.mgmt
overwrite settings overwrite identifier
Newer FW versions (4.20 or newer) supports update of "fw.undi" and
"fw.netlist" components.
$ devlink dev flash <pci-address> <update-image.bin>
Tested on Intel Corporation Ethernet Controller E810-C for SFP
FW revision 3.20 and 4.30.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add devl guard for scoped_guard().
Example usage:
scoped_guard(devl, priv_to_devlink(pf)) {
err = init_devlink(pf);
if (err)
return err;
}
Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This patch enables to update a selected component from PLDM image
containing multiple components.
Example usage:
struct pldmfw;
data.mode = PLDMFW_UPDATE_MODE_SINGLE_COMPONENT;
data.compontent_identifier = DRIVER_FW_MGMT_COMPONENT_ID;
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.
The following sequence deletes the interface:
brcmf_detach()
brcmf_remove_interface()
brcmf_del_if()
Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.
After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:
brcmf_detach()
brcmf_proto_detach()
brcmf_proto_msgbuf_detach()
brcmf_flowring_detach()
brcmf_msgbuf_delete_flowring()
brcmf_msgbuf_remove_flowring()
brcmf_flowring_delete()
brcmf_get_ifp()
brcmf_txfinalize()
Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.
This will only happen if a flowring still has an skb.
Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
|
