summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-15ipv6: avoid dad-failures for addresses with NODADMahesh Bandewar
Every address gets added with TENTATIVE flag even for the addresses with IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process we realize it's an address with NODAD and complete the process without sending any probe. However the TENTATIVE flags stays on the address for sometime enough to cause misinterpretation when we receive a NS. While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED and endup with an address that was originally configured as NODAD with DADFAILED. We can't avoid scheduling dad_work for addresses with NODAD but we can avoid adding TENTATIVE flag to avoid this racy situation. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-15qed: Fix uninitialized data in aRFS infrastructureMintz, Yuval
Current memset is using incorrect type of variable, causing the upper-half of the strucutre to be left uninitialized and causing: ethernet/qlogic/qed/qed_init_fw_funcs.c: In function 'qed_set_rfs_mode_disable': ethernet/qlogic/qed/qed_init_fw_funcs.c:993:3: error: '*((void *)&ramline+4)' is used uninitialized in this function [-Werror=uninitialized] Fixes: d51e4af5c209 ("qed: aRFS infrastructure support") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-15mdio: mux: fix device_node_continue.cocci warningsJulia Lawall
Device node iterators put the previous value of the index variable, so an explicit put causes a double put. In particular, of_mdiobus_register can fail before doing anything interesting, so one could view it as a no-op from the reference count point of view. Generated by: scripts/coccinelle/iterators/device_node_continue.cocci CC: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-15net/packet: fix missing net_device reference releaseDouglas Caetano dos Santos
When using a TX ring buffer, if an error occurs processing a control message (e.g. invalid message), the net_device reference is not released. Fixes c14ac9451c348 ("sock: enable timestamping using control messages") Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-15net/mlx4_core: Use min3 to select number of MSI-X vectorsyuval.shaia@oracle.com
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-15macvlan: Fix performance issues with vlan tagged packetsVlad Yasevich
Macvlan always turns on offload features that have sofware fallback (NETIF_GSO_SOFTWARE). This allows much higher guest-guest communications over macvtap. However, macvtap does not turn on these features for vlan tagged traffic. As a result, depending on the HW that mactap is configured on, the performance of guest-guest communication over a vlan is very inconsistent. If the HW supports TSO/UFO over vlans, then the performance will be fine. If not, the the performance will suffer greatly since the VM may continue using TSO/UFO, and will force the host segment the traffic and possibly overlow the macvtap queue. This patch adds the always on offloads to vlan_features. This makes sure that any vlan tagged traffic between 2 guest will not be segmented needlessly. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-15arm64: perf: Ignore exclude_hv when kernel is running in HYPGanapatrao Kulkarni
commit d98ecdaca296 ("arm64: perf: Count EL2 events if the kernel is running in HYP") returns -EINVAL when perf system call perf_event_open is called with exclude_hv != exclude_kernel. This change breaks applications on VHE enabled ARMv8.1 platforms. The issue was observed with HHVM application, which calls perf_event_open with exclude_hv = 1 and exclude_kernel = 0. There is no separate hypervisor privilege level when VHE is enabled, the host kernel runs at EL2. So when VHE is enabled, we should ignore exclude_hv from the application. This behaviour is consistent with PowerPC where the exclude_hv is ignored when the hypervisor is not present and with x86 where this flag is ignored. Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> [will: added comment to justify the behaviour of exclude_hv] Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-05-15arm64: Remove redundant mov from LL/SC cmpxchgRobin Murphy
The cmpxchg implementation introduced by commit c342f78217e8 ("arm64: cmpxchg: patch in lse instructions when supported by the CPU") performs an apparently redundant register move of [old] to [oldval] in the success case - it always uses the same register width as [oldval] was originally loaded with, and is only executed when [old] and [oldval] are known to be equal anyway. The only effect it seemingly does have is to take up a surprising amount of space in the kernel text, as removing it reveals: text data bss dec hex filename 12426658 1348614 4499749 18275021 116dacd vmlinux.o.new 12429238 1348614 4499749 18277601 116e4e1 vmlinux.o.old Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-05-15i2c: mux: only print failure message on errorPeter Rosin
As is, a failure message is printed unconditionally, which is confusing. And noisy. Fixes: 8d4d159f25a7 ("i2c: mux: provide more info on failure in i2c_mux_add_adapter") Signed-off-by: Peter Rosin <peda@axentia.se>
2017-05-15i2c: mux: reg: rename label to indicate what it doesPeter Rosin
That maintains sanity if it is ever called from some other spot, and also makes the label names coherent. Signed-off-by: Peter Rosin <peda@axentia.se>
2017-05-15i2c: mux: reg: put away the parent i2c adapter on probe failurePeter Rosin
It is only prudent to let go of resources that are not used. Fixes: b3fdd32799d8 ("i2c: mux: Add register-based mux i2c-mux-reg") Signed-off-by: Peter Rosin <peda@axentia.se>
2017-05-15KVM: nVMX: fix EPT permissions as reported in exit qualificationPaolo Bonzini
This fixes the new ept_access_test_read_only and ept_access_test_read_write testcases from vmx.flat. The problem is that gpte_access moves bits around to switch from EPT bit order (XWR) to ACC_*_MASK bit order (RWX). This results in an incorrect exit qualification. To fix this, make pt_access and pte_access operate on raw PTE values (only with NX flipped to mean "can execute") and call gpte_access at the end of the walk. This lets us use pte_access to compute the exit qualification with XWR bit order. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@tencent.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-05-15KVM: VMX: Don't enable EPT A/D feature if EPT feature is disabledWanpeng Li
We can observe eptad kvm_intel module parameter is still Y even if ept is disabled which is weird. This patch will not enable EPT A/D feature if EPT feature is disabled. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-05-15KVM: x86: Fix load damaged SSEx MXCSR registerWanpeng Li
Reported by syzkaller: BUG: unable to handle kernel paging request at ffffffffc07f6a2e IP: report_bug+0x94/0x120 PGD 348e12067 P4D 348e12067 PUD 348e14067 PMD 3cbd84067 PTE 80000003f7e87161 Oops: 0003 [#1] SMP CPU: 2 PID: 7091 Comm: kvm_load_guest_ Tainted: G OE 4.11.0+ #8 task: ffff92fdfb525400 task.stack: ffffbda6c3d04000 RIP: 0010:report_bug+0x94/0x120 RSP: 0018:ffffbda6c3d07b20 EFLAGS: 00010202 do_trap+0x156/0x170 do_error_trap+0xa3/0x170 ? kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm] ? mark_held_locks+0x79/0xa0 ? retint_kernel+0x10/0x10 ? trace_hardirqs_off_thunk+0x1a/0x1c do_invalid_op+0x20/0x30 invalid_op+0x1e/0x30 RIP: 0010:kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm] ? kvm_load_guest_fpu.part.175+0x1c/0x170 [kvm] kvm_arch_vcpu_ioctl_run+0xed6/0x1b70 [kvm] kvm_vcpu_ioctl+0x384/0x780 [kvm] ? kvm_vcpu_ioctl+0x384/0x780 [kvm] ? sched_clock+0x13/0x20 ? __do_page_fault+0x2a0/0x550 do_vfs_ioctl+0xa4/0x700 ? up_read+0x1f/0x40 ? __do_page_fault+0x2a0/0x550 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 SDM mentioned that "The MXCSR has several reserved bits, and attempting to write a 1 to any of these bits will cause a general-protection exception(#GP) to be generated". The syzkaller forks' testcase overrides xsave area w/ random values and steps on the reserved bits of MXCSR register. The damaged MXCSR register values of guest will be restored to SSEx MXCSR register before vmentry. This patch fixes it by catching userspace override MXCSR register reserved bits w/ random values and bails out immediately. Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-05-15kvm: nVMX: off by one in vmx_write_pml_buffer()Dan Carpenter
There are PML_ENTITY_NUM elements in the pml_address[] array so the > should be >= or we write beyond the end of the array when we do: pml_address[vmcs12->guest_pml_index--] = gpa; Fixes: c5f983f6e845 ("nVMX: Implement emulated Page Modification Logging") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-05-15net: stmmac: use correct pointer when printing normal descriptor ringNiklas Cassel
There are two pointers in sysfs_display_ring, one that increments if using normal dma descriptors, another if using extended dma descriptors. When printing the normal dma descriptors, the wrong pointer is used, thus the printed descriptor addresses are incorrect. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-15Merge branch 'kvm-ppc-fixes' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc - fix build failures with PR KVM configurations - fix a host crash that can occur on POWER9 with radix guests
2017-05-15KVM: arm: rename pm_fake handler to trap_raz_wiZhichao Huang
pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Signed-off-by: Zhichao Huang <zhichao.huang@linaro.org> Reviewed-by: Alex Bennee <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15KVM: arm: plug potential guest hardware debug leakageZhichao Huang
Hardware debugging in guests is not intercepted currently, it means that a malicious guest can bring down the entire machine by writing to the debug registers. This patch enable trapping of all debug registers, preventing the guests to access the debug registers. This includes access to the debug mode(DBGDSCR) in the guest world all the time which could otherwise mess with the host state. Reads return 0 and writes are ignored (RAZ_WI). The result is the guest cannot detect any working hardware based debug support. As debug exceptions are still routed to the guest normal debug using software based breakpoints still works. To support debugging using hardware registers we need to implement a debug register aware world switch as well as special trapping for registers that may affect the host state. Cc: stable@vger.kernel.org Signed-off-by: Zhichao Huang <zhichao.huang@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15drm/i915: don't do allocate_va_range again on PIN_UPDATEMatthew Auld
If a vma is already bound to a ppgtt, we incorrectly call allocate_va_range again when doing a PIN_UPDATE, which will result in over accounting within our paging structures, such that when we do unbind something we don't actually destroy the structures and end up inadvertently recycling them. In reality this probably isn't too bad, but once we start touching PDEs and PDPEs for 64K/2M/1G pages this apparent recycling will manifest into lots of really, really subtle bugs. v2: Fix the testing of vma->flags for aliasing_ppgtt_bind_vma Fixes: ff685975d97f ("drm/i915: Move allocate_va_range to GTT") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170512091423.26085-1-chris@chris-wilson.co.uk (cherry picked from commit 1f23475c893a85c934143cd64865ebb9b6af383f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-05-15drm/i915: Fix rawclk readout for g4xVille Syrjälä
Turns out our skills in decoding the CLKCFG register weren't good enough. On this particular elk the answer we got was 400 MHz when in reality the clock was running at 266 MHz, which then caused us to program a bogus AUX clock divider that caused all AUX communication to fail. Sadly the docs are now in bit heaven, so the fix will have to be based on empirical evidence. Using another elk machine I was able to frob the FSB frequency from the BIOS and see how it affects the CLKCFG register. The machine seesm to use a frequency of 266 MHz by default, and fortunately it still boot even with the 50% CPU overclock that we get when we bump the FSB up to 400 MHz. It turns out the actual FSB frequency and the register have no real link whatsoever. The register value is based on some straps or something, but fortunately those too can be configured from the BIOS on this board, although it doesn't seem to respect the settings 100%. In the end I was able to derive the following relationship: BIOS FSB / strap | CLKCFG ------------------------- 200 | 0x2 266 | 0x0 333 | 0x4 400 | 0x4 So only the 200 and 400 MHz cases actually match how we're currently decoding that register. But as the comment next to some of the defines says, we have been just guessing anyway. So let's fix things up so that at least the 266 MHz case will work correctly as that is actually the setting used by both the buggy machine and my test machine. The fact that 333 and 400 MHz BIOS settings result in the same register value is a little disappointing, as that means we can't tell them apart. However, according to the gmch datasheet for both elk and ctg 400 Mhz is not even a supported FSB frequency, so I'm going to make the assumption that we should decode it as 333 MHz instead. Cc: stable@vger.kernel.org Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100926 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170504181530.6908-1-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com> (cherry picked from commit 6f38123ecaac446312a63523b68df84ceb5a06ed) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-05-15drm/i915: Fix runtime PM for LPE audioVille Syrjälä
Not calling pm_runtime_enable() means that runtime PM can't be enabled at all via sysfs. So we definitely need to call it from somewhere. Calling it from the driver seems like a bad idea because it would have to be paired with a pm_runtime_disable() at driver unload time, otherwise the core gets upset. Also if there's no LPE audio driver loaded then we couldn't runtime suspend i915 either. So it looks like a better plan is to call it from i915 when we register the platform device. That seems to match how pci generally does things. I cargo culted the pm_runtime_forbid() and pm_runtime_set_active() calls from pci as well. The exposed runtime PM API is massive an thorougly misleading, so I don't actually know if this is how you're supposed to use the API or not. But it seems to work. I can now runtime suspend i915 again with or without the LPE audio driver loaded, and reloading the LPE audio driver also seems to work. Note that powertop won't auto-tune runtime PM for platform devices, which is a little annoying. So I'm not sure that leaving runtime PM in "on" mode by default is the best choice here. But I've left it like that for now at least. Also remove the comment about there not being much benefit from LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime PM, which will also block s0ix, and that could have a measurable impact on power consumption. Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Fixes: 0b6b524f3915 ("ALSA: x86: Don't enable runtime PM as default") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-2-ville.syrjala@linux.intel.com Reviewed-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 183c00350ccda86781f6695840e6c5f5b22efbd1) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-05-15drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messagesAnder Conselvan de Oliveira
The sequence in glk_dsi_device_ready() enters ULPS then waits until it is *not* active to then disable it. The correct sequence according to the spec is to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE bit is zero, i.e., ULPS is active, and then disable ULPS. Fixing the condition gets rid of the following spurious error messages: [drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active Fixes: 4644848369c0 ("drm/i915/glk: Add MIPIIO Enable/disable sequence") Cc: Deepak M <m.deepak@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <drm-intel-fixes@lists.freedesktop.org> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170428080222.6147-1-ander.conselvan.de.oliveira@intel.com (cherry picked from commit 3acbec03b3c51559d01c879e9564d9c9610fe8ce) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-05-15staging: rtl8723bs: remove re-positioned call to kfree in ↵Ian W MORRISON
os_dep/ioctl_cfg80211.c A re-positioned call to kfree() in drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c causes a segmentation error. This patch removed the kfree() call. Fixes 6557ddfec348 ("staging: rtl8723bs: Fix various errors in os_dep/ioctl_cfg80211.c") Signed-off-by: Ian W Morrison <ianwmorrison@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15s390/virtio: change virtio_feature_desc:features type to __le32Heiko Carstens
The feature member of virtio_feature_desc contains little endian values, given that it contents will be converted with le32_to_cpu(). The "wrong" __u32 type leads to the sparse warnings below. In order to avoid them, use the correct __le32 type instead. drivers/s390/virtio/virtio_ccw.c:749:14: warning: cast to restricted __le32 drivers/s390/virtio/virtio_ccw.c:762:28: warning: cast to restricted __le32 Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-15kvm: arm/arm64: Fix race in resetting stage2 PGDSuzuki K Poulose
In kvm_free_stage2_pgd() we check the stage2 PGD before holding the lock and proceed to take the lock if it is valid. And we unmap the page tables, followed by releasing the lock. We reset the PGD only after dropping this lock, which could cause a race condition where another thread waiting on or even holding the lock, could potentially see that the PGD is still valid and proceed to perform a stage2 operation and later encounter a NULL PGD. [223090.242280] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [223090.262330] PC is at unmap_stage2_range+0x8c/0x428 [223090.262332] LR is at kvm_unmap_hva_handler+0x2c/0x3c [223090.262531] Call trace: [223090.262533] [<ffff0000080adb78>] unmap_stage2_range+0x8c/0x428 [223090.262535] [<ffff0000080adf40>] kvm_unmap_hva_handler+0x2c/0x3c [223090.262537] [<ffff0000080ace2c>] handle_hva_to_gpa+0xb0/0x104 [223090.262539] [<ffff0000080af988>] kvm_unmap_hva+0x5c/0xbc [223090.262543] [<ffff0000080a2478>] kvm_mmu_notifier_invalidate_page+0x50/0x8c [223090.262547] [<ffff0000082274f8>] __mmu_notifier_invalidate_page+0x5c/0x84 [223090.262551] [<ffff00000820b700>] try_to_unmap_one+0x1d0/0x4a0 [223090.262553] [<ffff00000820c5c8>] rmap_walk+0x1cc/0x2e0 [223090.262555] [<ffff00000820c90c>] try_to_unmap+0x74/0xa4 [223090.262557] [<ffff000008230ce4>] migrate_pages+0x31c/0x5ac [223090.262561] [<ffff0000081f869c>] compact_zone+0x3fc/0x7ac [223090.262563] [<ffff0000081f8ae0>] compact_zone_order+0x94/0xb0 [223090.262564] [<ffff0000081f91c0>] try_to_compact_pages+0x108/0x290 [223090.262569] [<ffff0000081d5108>] __alloc_pages_direct_compact+0x70/0x1ac [223090.262571] [<ffff0000081d64a0>] __alloc_pages_nodemask+0x434/0x9f4 [223090.262572] [<ffff0000082256f0>] alloc_pages_vma+0x230/0x254 [223090.262574] [<ffff000008235e5c>] do_huge_pmd_anonymous_page+0x114/0x538 [223090.262576] [<ffff000008201bec>] handle_mm_fault+0xd40/0x17a4 [223090.262577] [<ffff0000081fb324>] __get_user_pages+0x12c/0x36c [223090.262578] [<ffff0000081fb804>] get_user_pages_unlocked+0xa4/0x1b8 [223090.262579] [<ffff0000080a3ce8>] __gfn_to_pfn_memslot+0x280/0x31c [223090.262580] [<ffff0000080a3dd0>] gfn_to_pfn_prot+0x4c/0x5c [223090.262582] [<ffff0000080af3f8>] kvm_handle_guest_abort+0x240/0x774 [223090.262584] [<ffff0000080b2bac>] handle_exit+0x11c/0x1ac [223090.262586] [<ffff0000080ab99c>] kvm_arch_vcpu_ioctl_run+0x31c/0x648 [223090.262587] [<ffff0000080a1d78>] kvm_vcpu_ioctl+0x378/0x768 [223090.262590] [<ffff00000825df5c>] do_vfs_ioctl+0x324/0x5a4 [223090.262591] [<ffff00000825e26c>] SyS_ioctl+0x90/0xa4 [223090.262595] [<ffff000008085d84>] el0_svc_naked+0x38/0x3c This patch moves the stage2 PGD manipulation under the lock. Reported-by: Alexander Graf <agraf@suse.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15Merge tag 'gvt-fixes-2017-05-11' of https://github.com/01org/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2017-05-11 - vGPU scheduler performance regression fix (Ping) - bypass in-context mmio restore (Chuanxiao) - one typo fix (Colin) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170511054736.swpcmnzdoqi75cnl@zhen-hp.sh.intel.com
2017-05-15USB: serial: io_ti: fix div-by-zero in set_termiosJohan Hovold
Fix a division-by-zero in set_termios when debugging is enabled and a high-enough speed has been requested so that the divisor value becomes zero. Instead of just fixing the offending debug statement, cap the baud rate at the base as a zero divisor value also appears to crash the firmware. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # 2.6.12 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-05-15USB: serial: mct_u232: fix big-endian baud-rate handlingJohan Hovold
Drop erroneous cpu_to_le32 when setting the baud rate, something which corrupted the divisor on big-endian hosts. Found using sparse: warning: incorrect type in argument 1 (different base types) expected unsigned int [unsigned] [usertype] val got restricted __le32 [usertype] <noident> Fixes: af2ac1a091bc ("USB: serial mct_usb232: move DMA buffers to heap") Cc: stable <stable@vger.kernel.org> # 2.6.34 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-By: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-05-15USB: serial: ir-usb: fix big-endian baud-rate debug printkJohan Hovold
Add missing endianness conversion when printing the supported baud rates. Found using sparse: warning: restricted __le16 degrades to integer Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-05-15staging: rtl8192e: GetTs Fix invalid TID 7 warning.Malcolm Priestley
TID 7 is a valid value for QoS IEEE 802.11e. The switch statement that follows states 7 is valid. Remove function IsACValid and use the default case to filter invalid TIDs. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD.Malcolm Priestley
EPROM_CMD is 2 byte aligned on PCI map so calling with rtl92e_readl will return invalid data so use rtl92e_readw. The device is unable to select the right eeprom type. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: rtl8192e: fix 2 byte alignment of register BSSIDR.Malcolm Priestley
BSSIDR has two byte alignment on PCI ioremap correct the write by swapping to 16 bits first. This fixes a problem that the device associates fail because the filter is not set correctly. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory.Malcolm Priestley
The driver attempts to alter memory that is mapped to PCI device. This is because tx_fwinfo_8190pci points to skb->data Move the pci_map_single to when completed buffer is ready to be mapped with psdec is empty to drop on mapping error. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: vc04_services: Fix bulk cache maintenancePhil Elwell
vchiq_arm supports transfers less than one page and at arbitrary alignment, using the dma-mapping API to perform its cache maintenance (even though the VPU drives the DMA hardware). Read (DMA_FROM_DEVICE) operations use cache invalidation for speed, falling back to clean+invalidate on partial cache lines, with writes (DMA_TO_DEVICE) using flushes. If a read transfer has ends which aren't page-aligned, performing cache maintenance as if they were whole pages can lead to memory corruption since the partial cache lines at the ends (and any cache lines before or after the transfer area) will be invalidated. This bug was masked until the disabling of the cache flush in flush_dcache_page(). Honouring the requested transfer start- and end-points prevents the corruption. Fixes: cf9caf192988 ("staging: vc04_services: Replace dmac_map_area with dmac_map_sg") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Cc: stable <stable@vger.kernel.org> # 4.10 Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: ccree: remove extraneous spin_unlock_bh() in error handlerIan Chard
An early error handler in send_request() tries to release a spinlock, but the lock isn't acquired until the loop below it is entered. Signed-off-by: Ian Chard <ian@chard.org> Acked-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: typec: Fix sparse warnings about incorrect typesGuru Das Srinagesh
Fix the following sparse warnings about incorrect type usage: fusb302.c:1028:32: warning: incorrect type in argument 1 (different base types) fusb302.c:1028:32: expected unsigned short [unsigned] [usertype] header fusb302.c:1028:32: got restricted __le16 const [usertype] header fusb302.c:1484:32: warning: incorrect type in argument 1 (different base types) fusb302.c:1484:32: expected unsigned short [unsigned] [usertype] header fusb302.c:1484:32: got restricted __le16 [usertype] header Signed-off-by: Guru Das Srinagesh <gurooodas@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: typec: fusb302: do not free gpio from managed resourceRui Miguel Silva
When allocating a gpio using the managed resource devm_, we can avoid freeing it manually. But even if we did it we should use devm_gpio_free. So, just remove the free of the gpio in the error path. Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> Acked-by: Yueyao Zhu <yueyao.zhu@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15KVM: arm/arm64: vgic-v3: Use PREbits to infer the number of ICH_APxRn_EL2 ↵Marc Zyngier
registers The GICv3 documentation is extremely confusing, as it talks about the number of priorities represented by the ICH_APxRn_EL2 registers, while it should really talk about the number of preemption levels. This leads to a bug where we may access undefined ICH_APxRn_EL2 registers, since PREbits is allowed to be smaller than PRIbits. Thankfully, nobody seem to have taken this path so far... The fix is to use ICH_VTR_EL2.PREbits instead. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15KVM: arm/arm64: vgic-v3: Do not use Active+Pending state for a HW interruptMarc Zyngier
When an interrupt is injected with the HW bit set (indicating that deactivation should be propagated to the physical distributor), special care must be taken so that we never mark the corresponding LR with the Active+Pending state (as the pending state is kept in the physycal distributor). Cc: stable@vger.kernel.org Fixes: 59529f69f504 ("KVM: arm/arm64: vgic-new: Add GICv3 world switch backend") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15KVM: arm/arm64: vgic-v2: Do not use Active+Pending state for a HW interruptMarc Zyngier
When an interrupt is injected with the HW bit set (indicating that deactivation should be propagated to the physical distributor), special care must be taken so that we never mark the corresponding LR with the Active+Pending state (as the pending state is kept in the physycal distributor). Cc: stable@vger.kernel.org Fixes: 140b086dd197 ("KVM: arm/arm64: vgic-new: Add GICv2 world switch backend") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15powerpc/tm: Fix FP and VMX register corruptionMichael Neuling
In commit dc3106690b20 ("powerpc: tm: Always use fp_state and vr_state to store live registers"), a section of code was removed that copied the current state to checkpointed state. That code should not have been removed. When an FP (Floating Point) unavailable is taken inside a transaction, we need to abort the transaction. This is because at the time of the tbegin, the FP state is bogus so the state stored in the checkpointed registers is incorrect. To fix this, we treclaim (to get the checkpointed GPRs) and then copy the thread_struct FP live state into the checkpointed state. We then trecheckpoint so that the FP state is correctly restored into the CPU. The copying of the FP registers from live to checkpointed is what was missing. This simplifies the logic slightly from the original patch. tm_reclaim_thread() will now always write the checkpointed FP state. Either the checkpointed FP state will be written as part of the actual treclaim (in tm.S), or it'll be a copy of the live state. Which one we use is based on MSR[FP] from userspace. Similarly for VMX. Fixes: dc3106690b20 ("powerpc: tm: Always use fp_state and vr_state to store live registers") Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: cyrilbur@gmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-15arm: KVM: Do not use stack-protector to compile HYP codeMarc Zyngier
We like living dangerously. Nothing explicitely forbids stack-protector to be used in the HYP code, while distributions routinely compile their kernel with it. We're just lucky that no code actually triggers the instrumentation. Let's not try our luck for much longer, and disable stack-protector for code living at HYP. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15powerpc/modules: If mprofile-kernel is enabled add it to vermagicMichael Ellerman
On powerpc we can build the kernel with two different ABIs for mcount(), which is used by ftrace. Kernels built with one ABI do not know how to load modules built with the other ABI. The new style ABI is called "mprofile-kernel", for want of a better name. Currently if we build a module using the old style ABI, and the kernel with mprofile-kernel, when we load the module we'll oops something like: # insmod autofs4-no-mprofile-kernel.ko ftrace-powerpc: Unexpected instruction f8810028 around bl _mcount ------------[ cut here ]------------ WARNING: CPU: 6 PID: 3759 at ../kernel/trace/ftrace.c:2024 ftrace_bug+0x2b8/0x3c0 CPU: 6 PID: 3759 Comm: insmod Not tainted 4.11.0-rc3-gcc-5.4.1-00017-g5a61ef74f269 #11 ... NIP [c0000000001eaa48] ftrace_bug+0x2b8/0x3c0 LR [c0000000001eaff8] ftrace_process_locs+0x4a8/0x590 Call Trace: alloc_pages_current+0xc4/0x1d0 (unreliable) ftrace_process_locs+0x4a8/0x590 load_module+0x1c8c/0x28f0 SyS_finit_module+0x110/0x140 system_call+0x38/0xfc ... ftrace failed to modify [<d000000002a31024>] 0xd000000002a31024 actual: 35:65:00:48 We can avoid this by including in the vermagic whether the kernel/module was built with mprofile-kernel. Which results in: # insmod autofs4-pg.ko autofs4: version magic '4.11.0-rc3-gcc-5.4.1-00017-g5a61ef74f269 SMP mod_unload modversions ' should be '4.11.0-rc3-gcc-5.4.1-00017-g5a61ef74f269-dirty SMP mod_unload modversions mprofile-kernel' insmod: ERROR: could not insert module autofs4-pg.ko: Invalid module format Fixes: 8c50b72a3b4f ("powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Jessica Yu <jeyu@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-15arm64: KVM: Do not use stack-protector to compile EL2 codeMarc Zyngier
We like living dangerously. Nothing explicitely forbids stack-protector to be used in the EL2 code, while distributions routinely compile their kernel with it. We're just lucky that no code actually triggers the instrumentation. Let's not try our luck for much longer, and disable stack-protector for code living at EL2. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15staging: typec: tcpm: Fix Port Power Role field in PS_RDY messagesGuenter Roeck
PS_RDY messages sent during power swap sequences are expected to reflect the new power role. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: typec: tcpm: Respond to Discover Identity commandsGuenter Roeck
If the lower level driver provided a list of VDOs in its configuration data, send it to the partner as response to a Discover Identity command if in device mode (UFP). Cc: Yueyao Zhu <yueyao.zhu@gmail.com> Originally-from: Puma Hsu <puma_hsu@htc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: typec: tcpm: Set correct flags in PD request messagesGuenter Roeck
We do support USB PD communication, and devices supported by this driver typically use USB power for purposes other than USB communication. Originally-from: Puma Hsu <puma_hsu@htc.com> Cc: Yueyao Zhu <yueyao.zhu@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: typec: tcpm: Drop duplicate PD messagesGuenter Roeck
Per USB PD standard, we have to drop duplicate PD messages. We can not expect lower protocol layers to drop such messages, since lower layers don't know if a message was dropped somewhere else in the stack. Originally-from: Puma Hsu <puma_hsu@htc.com> Cc: Yueyao Zhu <yueyao.zhu@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging: typec: fusb302: Fix chip->vbus_present init valueYueyao Zhu
FUSB_REG_STATUS0 & FUSB_REG_STATUS0_VBUSOK = 0x40 & 0x80 is always zero. Fix the code to what it is intended to be: check the VBUSOK bit of the value read from address FUSB_REG_STATUS0. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Yueyao Zhu <yueyao.zhu@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 06:38:24 +0000