summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-05net/mlx5: Export packet reformat alloc/dealloc functionsMark Bloch
This will allow for the RDMA side to allocate packet reformat context. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-05net/mlx5: Pass a namespace for packet reformat ID allocationMark Bloch
Currently we attach packet reformat actions only to the FDB namespace. In preparation to be able to use that for NIC steering, pass the actual namespace as a parameter. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-05net/mlx5: Expose new packet reformat capabilitiesMark Bloch
Expose new abilities when creating a packet reformat context. The new types which can be created are: MLX5_REFORMAT_TYPE_L2_TO_L2_TUNNEL: Ability to create generic encap operation to be done by the HW. MLX5_REFORMAT_TYPE_L3_TUNNEL_TO_L2: Ability to create generic decap operation where the inner packet doesn't contain L2. MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL: Ability to create generic encap operation to be done by the HW. The L2 of the original packet is dropped. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-05{net, RDMA}/mlx5: Rename encap to reformat packetMark Bloch
Renames all encap mlx5_{core,ib} code to use the new naming of packet reformat. This change doesn't introduce any function change and is needed to properly reflect the operation being done by this action. For example not only can we encapsulate a packet, but also decapsulate it. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-05net/mlx5: Move header encap type to IFC header fileMark Bloch
Those bits are hardware specification and should be defined in the IFC header file. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-05net/mlx5: Break encap/decap into two separated flow table creation flagsMark Bloch
Today we are able to attach encap and decap actions only to the FDB. In preparation to enable those actions on the NIC flow tables, break the single flag into two. Those flags control whatever a decap or encap operations can be attached to the flow table created. For FDB, if encapsulation is required, we set both of them. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-05net/mlx5: Add support for more namespaces when allocating modify headerMark Bloch
There are RX and TX flow steering namespaces with different number of actions. Initialize them accordingly. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-05net/mlx5: Export modify header alloc/dealloc functionsMark Bloch
Those functions will be used by the RDMA side to create modify header actions to be attached to flow steering rules via verbs. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-05net/mlx5: Add proper NIC TX steering flow tables supportMark Bloch
Extend the ability to add steering rules to NIC TX flow tables. For now, we are only adding TX bypass (egress) which is used by the RDMA side. This will allow to shape outgoing traffic and tweak it if needed, for example performing encapsulation or rewriting headers. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-05net/mlx5: Cleanup flow namespace getter switch logicMark Bloch
Refactor the switch logic so it's simpler to follow and understand. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-04IB/mlx5: Change TX affinity assignment in RoCE LAG modeMajd Dibbiny
In the current code, the TX affinity is per RoCE device, which can cause unfairness between different contexts. e.g. if we open two contexts, and each open 10 QPs concurrently, all of the QPs of the first context might end up on the first port instead of distributed on the two ports as expected To overcome this unfairness between processes, we maintain per device TX affinity, and per process TX affinity. The allocation algorithm is as follow: 1. Hold two tx_port_affinity atomic variables, one per RoCE device and one per ucontext. Both initialized to 0. 2. In mlx5_ib_alloc_ucontext do: 2.1. ucontext.tx_port_affinity = device.tx_port_affinity 2.2. device.tx_port_affinity += 1 3. In modify QP INIT2RST: 3.1. qp.tx_port_affinity = ucontext.tx_port_affinity % MLX5_PORT_NUM 3.2. ucontext.tx_port_affinity += 1 Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-04iw_cxgb4: only allow 1 flush on user qpsSteve Wise
Once the qp has been flushed, it cannot be flushed again. The user qp flush logic wasn't enforcing it however. The bug can cause touch-after-free crashes like: Unable to handle kernel paging request for data at address 0x000001ec Faulting instruction address: 0xc008000016069100 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4] LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] Call Trace: [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] [c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4] [c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core] [c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core] [c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm] [c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm] [c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm] [c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm] [c000000000444da4] __fput+0xe4/0x2f0 So fix flush_qp() to only flush the wq once. Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-04IB/core: Release object lock if destroy failedArtemy Kovalyov
The object lock was supposed to always be released during destroy, but when the destruction retry series was integrated with the destroy series it created a failure path that missed the unlock. Keep with convention, if destroy fails the caller must undo all locking. Fixes: 87ad80abc70d ("IB/uverbs: Consolidate uobject destruction") Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-04RDMA/ucma: check fd type in ucma_migrate_id()Jann Horn
The current code grabs the private_data of whatever file descriptor userspace has supplied and implicitly casts it to a `struct ucma_file *`, potentially causing a type confusion. This is probably fine in practice because the pointer is only used for comparisons, it is never actually dereferenced; and even in the comparisons, it is unlikely that a file from another filesystem would have a ->private_data pointer that happens to also be valid in this context. But ->private_data is not always guaranteed to be a valid pointer to an object owned by the file's filesystem; for example, some filesystems just cram numbers in there. Check the type of the supplied file descriptor to be safe, analogous to how other places in the kernel do it. Fixes: 88314e4dda1e ("RDMA/cma: add support for rdma_migrate_id()") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-04net/mlx5: Add memic command opcode to command checkerAriel Levkovich
Adding the alloc/dealloc memic FW command opcodes to avoid "unknown command" prints in the command string converter and internal error status handler. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-04net/mlx5: Fix atomic_mode enum valuesMoni Shoua
The field atomic_mode is 4 bits wide and therefore can hold values from 0x0 to 0xf. Remove the unnecessary 20 bit shift that made the values be incorrect. While that, remove unused enum values. Fixes: 57cda166bbe0 ("net/mlx5: Add DCT command interface") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-02Linux 4.19-rc2Linus Torvalds
2018-09-02Merge tag 'devicetree-fixes-for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "A couple of new helper functions in preparation for some tree wide clean-ups. I'm sending these new helpers now for rc2 in order to simplify the dependencies on subsequent cleanups across the tree in 4.20" * tag 'devicetree-fixes-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add device_type access helper functions of: add node name compare helper functions of: add helper to lookup compatible child node
2018-09-02Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "First batch of fixes post-merge window: - A handful of devicetree changes for i.MX2{3,8} to change over to new panel bindings. The platforms were moved from legacy framebuffers to DRM and some development board panels hadn't yet been converted. - OMAP fixes related to ti-sysc driver conversion fallout, fixing some register offsets, no_console_suspend fixes, etc. - Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge. - Fixed 0755->0644 permissions on a newly added file. - Defconfig changes to make ARM Versatile more useful with QEMU (helps testing). - Enable defconfig options for new TI SoC platform that was merged this window (AM6)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: defconfig: Enable TI's AM6 SoC platform ARM: defconfig: Update the ARM Versatile defconfig ARM: dts: omap4-droid4: Fix emmc errors seen on some devices ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: dts: imx23-evk: Convert to the new display bindings ARM: dts: imx23-evk: Move regulators outside simple-bus ARM: dts: imx28-evk: Convert to the new display bindings ARM: dts: imx28-evk: Move regulators outside simple-bus Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping" arm: dts: am4372: setup rtc as system-power-controller ARM: dts: omap4-droid4: fix vibrations on Droid 4 bus: ti-sysc: Fix no_console_suspend handling bus: ti-sysc: Fix module register ioremap for larger offsets ARM: OMAP2+: Fix module address for modules using mpu_rt_idx ARM: OMAP2+: Fix null hwmod for ti-sysc debug
2018-09-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Speculation: - Make the microcode check more robust - Make the L1TF memory limit depend on the internal cache physical address space and not on the CPUID advertised physical address space, which might be significantly smaller. This avoids disabling L1TF on machines which utilize the full physical address space. - Fix the GDT mapping for EFI calls on 32bit PTI - Fix the MCE nospec implementation to prevent #GP Fixes and robustness: - Use the proper operand order for LSL in the VDSO - Prevent NMI uaccess race against CR3 switching - Add a lockdep check to verify that text_mutex is held in text_poke() functions - Repair the fallout of giving native_restore_fl() a prototype - Prevent kernel memory dumps based on usermode RIP - Wipe KASAN shadow stack before rewinding the stack to prevent false positives - Move the AMS GOTO enforcement to the actual build stage to allow user API header extraction without a compiler - Fix a section mismatch introduced by the on demand VDSO mapping change Miscellaneous: - Trivial typo, GCC quirk removal and CC_SET/OUT() cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pti: Fix section mismatch warning/error x86/vdso: Fix lsl operand order x86/mce: Fix set_mce_nospec() to avoid #GP fault x86/efi: Load fixmap GDT in efi_call_phys_epilog() x86/nmi: Fix NMI uaccess race against CR3 switching x86: Allow generating user-space headers without a compiler x86/dumpstack: Don't dump kernel memory based on usermode RIP x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember() x86/alternatives: Lockdep-enforce text_mutex in text_poke*() x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit() x86/irqflags: Mark native_restore_fl extern inline x86/build: Remove jump label quirk for GCC older than 4.5.2 x86/Kconfig: Fix trivial typo x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+ x86/spectre: Add missing family 6 check to microcode check
2018-09-02Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug fix from Thomas Gleixner: "Remove the stale skip_onerr member from the hotplug states" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Remove skip_onerr field from cpuhp_step structure
2018-09-02Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: "A small set of updates for core code: - Prevent tracing in functions which are called from trace patching via stop_machine() to prevent executing half patched function trace entries. - Remove old GCC workarounds - Remove pointless includes of notifier.h" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Remove workaround for unreachable warnings from old GCC notifier: Remove notifier header file wherever not used watchdog: Mark watchdog touch functions as notrace
2018-09-02x86/pti: Fix section mismatch warning/errorRandy Dunlap
Fix the section mismatch warning in arch/x86/mm/pti.c: WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the function pti_clone_pgtable() to the function .init.text:pti_user_pagetable_walk_pte() The function pti_clone_pgtable() references the function __init pti_user_pagetable_walk_pte(). This is often because pti_clone_pgtable lacks a __init annotation or the annotation of pti_user_pagetable_walk_pte is wrong. FATAL: modpost: Section mismatches detected. Fixes: 85900ea51577 ("x86/pti: Map the vsyscall page if needed") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/43a6d6a3-d69d-5eda-da09-0b1c88215a2a@infradead.org
2018-09-01Merge tag 'omap-for-v4.19/fixes-v2-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap variants against v4.19-rc1 These are mostly fixes related to using ti-sysc interconnect target module driver for accessing right register offsets for sgx and cpsw and for no_console_suspend regression. There is also a droid4 emmc fix where emmc may not get detected for some models, and vibrator dts mismerge fix. And we have a file permission fix for am335x-osd3358-sm-red.dts that just got added. And we must tag RTC as system-power-controller for am437x for PMIC to shut down during poweroff. * tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix emmc errors seen on some devices ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts arm: dts: am4372: setup rtc as system-power-controller ARM: dts: omap4-droid4: fix vibrations on Droid 4 bus: ti-sysc: Fix no_console_suspend handling bus: ti-sysc: Fix module register ioremap for larger offsets ARM: OMAP2+: Fix module address for modules using mpu_rt_idx ARM: OMAP2+: Fix null hwmod for ti-sysc debug Signed-off-by: Olof Johansson <olof@lixom.net>
2018-09-01x86/vdso: Fix lsl operand orderSamuel Neves
In the __getcpu function, lsl is using the wrong target and destination registers. Luckily, the compiler tends to choose %eax for both variables, so it has been working so far. Fixes: a582c540ac1b ("x86/vdso: Use RDPID in preference to LSL when available") Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.pt
2018-09-01Merge tag 'linux-watchdog-4.19-rc2' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixlet from Wim Van Sebroeck: "Document support for r8a774a1" * tag 'linux-watchdog-4.19-rc2' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: renesas-wdt: Document r8a774a1 support
2018-09-01Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two small fixes, one for the x86 Stoney SoC to get a more accurate clk frequency and the other to fix a bad allocation in the Nuvoton NPCM7XX driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: x86: Set default parent to 48Mhz clk: npcm7xx: fix memory allocation
2018-09-01x86/mce: Fix set_mce_nospec() to avoid #GP faultLuckTony
The trick with flipping bit 63 to avoid loading the address of the 1:1 mapping of the poisoned page while the 1:1 map is updated used to work when unmapping the page. But it falls down horribly when attempting to directly set the page as uncacheable. The problem is that when the cache mode is changed to uncachable, the pages needs to be flushed from the cache first. But the decoy address is non-canonical due to bit 63 flipped, and the CLFLUSH instruction throws a #GP fault. Add code to change_page_attr_set_clr() to fix the address before calling flush. Fixes: 284ce4011ba6 ("x86/memory_failure: Introduce {set, clear}_mce_nospec()") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Link: https://lkml.kernel.org/r/20180831165506.GA9605@agluck-desk
2018-09-01IB/hfi1: Move URGENT IRQ enable to hfi1_rcvctrl()Michael J. Ruhl
User contexts use the receive URGENT interrupt. However, enabling the IRQ SRC in the file_ops module is not as clean as it could be. Augment the _rcvctl() function to be able to enable/disable the IRQ source. Use the new interface from file_ops to enable/disable the IRQ. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Rework the IRQ API to be more flexibleMichael J. Ruhl
The current IRQ API is an all or nothing interface. This has two problems: 1. All IRQs are enabled regardless of use 2. Moving from general interrupt to MSIx handling is difficult Introduce a new API to enable/disable specific IRQs or a range of IRQs. Do not enable and disable all IRQs in one step. Rework various modules to enable/disable IRQs when needed. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: PCIe bus width retryKamenee Arumugam
Retry the PCIe link training up to 'pcie_retry' times if the PCIe link width is narrower than the previous width. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Make the MSIx resource allocation a bit more flexibleMichael J. Ruhl
The current method of allocating MSIx resources is a bit cumbersome, and not very easily added to. Refactor and re-order the code paths into a more consistent interface. Update the interface so that allocations are not order dependent. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Prepare for new HFI1 MSIx APIMichael J. Ruhl
The current HFI1 MSIx API is difficult to follow, change, or add to. In anticipation of moving to an more flexible API, move the current MSIx functionality to the new msix.c module. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Get the hfi1_devdata structure as early as possibleMichael J. Ruhl
Currently several things occur before the hfi1_devdata structure is allocated. This leads to an inconsistent logging ability and makes it more difficult to restructure some code paths. Allocate (and do a minimal init) the structure as soon as possible. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: tune_pcie_caps is arbitrarily placed, poorlyMichael J. Ruhl
The tune_pcie_caps needs to occur sometime after PCI is enabled, but before the HFI is enabled. Currently it is placed in the MSIx allocation code which doesn't really fit. Moving it to just after the gen3 bump. Clean up the associated code (modules, etc.). Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Remove duplicated definesMichael J. Ruhl
TXREQ defines are duplicated, incompletely, in the sdma header file. Remove duplicate defines. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Rework file list in MakefileDennis Dalessandro
We want to keep files in alphabetical order in our makefile, however this just makes for messy diffs when adding (or removing) files. Let's just clean this up and make it line by line. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-31Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A few arm64 fixes came in this week, specifically fixing some nasty truncation of return values from firmware calls and resolving a VM_BUG_ON due to accessing uninitialised struct pages corresponding to NOMAP pages. Summary: - Fix typos in SVE documentation - Fix type-checking and implicit truncation for SMCCC calls - Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP regions" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: always enable CONFIG_HOLES_IN_ZONE arm/arm64: smccc-1.1: Handle function result as parameters arm/arm64: smccc-1.1: Make return values unsigned long Documentation/arm64/sve: Couple of improvements and typos
2018-08-31x86/efi: Load fixmap GDT in efi_call_phys_epilog()Joerg Roedel
When PTI is enabled on x86-32 the kernel uses the GDT mapped in the fixmap for the simple reason that this address is also mapped for user-space. The efi_call_phys_prolog()/efi_call_phys_epilog() wrappers change the GDT to call EFI runtime services and switch back to the kernel GDT when they return. But the switch-back uses the writable GDT, not the fixmap GDT. When that happened and and the CPU returns to user-space it switches to the user %cr3 and tries to restore user segment registers. This fails because the writable GDT is not mapped in the user page-table, and without a GDT the fault handlers also can't be launched. The result is a triple fault and reboot of the machine. Fix that by restoring the GDT back to the fixmap GDT which is also mapped in the user page-table. Fixes: 7757d607c6b3 x86/pti: ('Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32') Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: hpa@zytor.com Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/1535702738-10971-1-git-send-email-joro@8bytes.org
2018-08-31Merge tag 'for-linus-4.19b-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - minor cleanup avoiding a warning when building with new gcc - a patch to add a new sysfs node for Xen frontend/backend drivers to make it easier to obtain the state of a pv device - two fixes for 32-bit pv-guests to avoid intermediate L1TF vulnerable PTEs * tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: remove redundant variable save_pud xen: export device state to sysfs x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear x86/xen: don't write ptes directly in 32-bit PV guests
2018-08-31Merge tag 'm68k-for-v4.19-tag2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "Just a single fix for a bug introduced during the merge window: fix wrong date and time on PMU-based Macs" * tag 'm68k-for-v4.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Use correct PMU response format
2018-08-31Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - regression fixes for i801 and designware - better API and leak fix for releasing DMA safe buffers - better greppable strings for the bitbang algorithm * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sh_mobile: fix leak when using DMA bounce buffer i2c: sh_mobile: define start_ch() void as it only returns 0 anyhow i2c: refactor function to release a DMA safe buffer i2c: algos: bit: make the error messages grepable i2c: designware: Re-init controllers with pm_disabled set on resume i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus
2018-08-31x86/nmi: Fix NMI uaccess race against CR3 switchingAndy Lutomirski
A NMI can hit in the middle of context switching or in the middle of switch_mm_irqs_off(). In either case, CR3 might not match current->mm, which could cause copy_from_user_nmi() and friends to read the wrong memory. Fix it by adding a new nmi_uaccess_okay() helper and checking it in copy_from_user_nmi() and in __copy_from_user_nmi()'s callers. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rik van Riel <riel@surriel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/dd956eba16646fd0b15c3c0741269dfd84452dac.1535557289.git.luto@kernel.org
2018-08-31x86: Allow generating user-space headers without a compilerBen Hutchings
When bootstrapping an architecture, it's usual to generate the kernel's user-space headers (make headers_install) before building a compiler. Move the compiler check (for asm goto support) to the archprepare target so that it is only done when building code for the target. Fixes: e501ce957a78 ("x86: Force asm-goto") Reported-by: Helmut Grohne <helmutg@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180829194317.GA4765@decadent.org.uk
2018-08-31x86/dumpstack: Don't dump kernel memory based on usermode RIPJann Horn
show_opcodes() is used both for dumping kernel instructions and for dumping user instructions. If userspace causes #PF by jumping to a kernel address, show_opcodes() can be reached with regs->ip controlled by the user, pointing to kernel code. Make sure that userspace can't trick us into dumping kernel memory into dmesg. Fixes: 7cccf0725cf7 ("x86/dumpstack: Add a show_ip() function") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: security@kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180828154901.112726-1-jannh@google.com
2018-08-31of: Add device_type access helper functionsRob Herring
In preparation to remove direct access to device_node.type, add of_node_is_type() and of_node_get_device_type() helpers to check and retrieve the device type. Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-31cpu/hotplug: Remove skip_onerr field from cpuhp_step structureMukesh Ojha
When notifiers were there, `skip_onerr` was used to avoid calling particular step startup/teardown callbacks in the CPU up/down rollback path, which made the hotplug asymmetric. As notifiers are gone now after the full state machine conversion, the `skip_onerr` field is no longer required. Remove it from the structure and its usage. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1535439294-31426-1-git-send-email-mojha@codeaurora.org
2018-08-31arm64: mm: always enable CONFIG_HOLES_IN_ZONEJames Morse
Commit 6d526ee26ccd ("arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA") only enabled HOLES_IN_ZONE for NUMA systems because the NUMA code was choking on the missing zone for nomap pages. This problem doesn't just apply to NUMA systems. If the architecture doesn't set HAVE_ARCH_PFN_VALID, pfn_valid() will return true if the pfn is part of a valid sparsemem section. When working with multiple pages, the mm code uses pfn_valid_within() to test each page it uses within the sparsemem section is valid. On most systems memory comes in MAX_ORDER_NR_PAGES chunks which all have valid/initialised struct pages. In this case pfn_valid_within() is optimised out. Systems where this isn't true (e.g. due to nomap) should set HOLES_IN_ZONE and provide HAVE_ARCH_PFN_VALID so that mm tests each page as it works with it. Currently non-NUMA arm64 systems can't enable HOLES_IN_ZONE, leading to a VM_BUG_ON(): | page:fffffdff802e1780 is uninitialized and poisoned | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) | ------------[ cut here ]------------ | kernel BUG at include/linux/mm.h:978! | Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] | CPU: 1 PID: 25236 Comm: dd Not tainted 4.18.0 #7 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 40000085 (nZcv daIf -PAN -UAO) | pc : move_freepages_block+0x144/0x248 | lr : move_freepages_block+0x144/0x248 | sp : fffffe0071177680 [...] | Process dd (pid: 25236, stack limit = 0x0000000094cc07fb) | Call trace: | move_freepages_block+0x144/0x248 | steal_suitable_fallback+0x100/0x16c | get_page_from_freelist+0x440/0xb20 | __alloc_pages_nodemask+0xe8/0x838 | new_slab+0xd4/0x418 | ___slab_alloc.constprop.27+0x380/0x4a8 | __slab_alloc.isra.21.constprop.26+0x24/0x34 | kmem_cache_alloc+0xa8/0x180 | alloc_buffer_head+0x1c/0x90 | alloc_page_buffers+0x68/0xb0 | create_empty_buffers+0x20/0x1ec | create_page_buffers+0xb0/0xf0 | __block_write_begin_int+0xc4/0x564 | __block_write_begin+0x10/0x18 | block_write_begin+0x48/0xd0 | blkdev_write_begin+0x28/0x30 | generic_perform_write+0x98/0x16c | __generic_file_write_iter+0x138/0x168 | blkdev_write_iter+0x80/0xf0 | __vfs_write+0xe4/0x10c | vfs_write+0xb4/0x168 | ksys_write+0x44/0x88 | sys_write+0xc/0x14 | el0_svc_naked+0x30/0x34 | Code: aa1303e0 90001a01 91296421 94008902 (d4210000) | ---[ end trace 1601ba47f6e883fe ]--- Remove the NUMA dependency. Link: https://www.spinics.net/lists/arm-kernel/msg671851.html Cc: <stable@vger.kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-08-31m68k/mac: Use correct PMU response formatFinn Thain
Now that the 68k Mac port has adopted the via-pmu driver, it must decode the PMU response accordingly otherwise the date and time will be wrong. Fixes: ebd722275f9cfc67 ("macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-08-30Merge tag 'drm-fixes-2018-08-31' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular fixes pull: - Mediatek has a bunch of fixes to their RDMA and Overlay engines. - i915 has some Cannonlake/Geminilake watermark workarounds, LSPCON fix, HDCP free fix, audio fix and a ppgtt reference counting fix. - amdgpu has some SRIOV, Kasan, memory leaks and other misc fixes" * tag 'drm-fixes-2018-08-31' of git://anongit.freedesktop.org/drm/drm: (35 commits) drm/i915/audio: Hook up component bindings even if displays are disabled drm/i915: Increase LSPCON timeout drm/i915: Stop holding a ref to the ppgtt from each vma drm/i915: Free write_buf that we allocated with kzalloc. drm/i915: Fix glk/cnl display w/a #1175 drm/amdgpu: Need to set moved to true when evict bo drm/amdgpu: Remove duplicated power source update drm/amd/display: Fix memory leak caused by missed dc_sink_release drm/amdgpu: fix holding mn_lock while allocating memory drm/amdgpu: Power on uvd block when hw_fini drm/amdgpu: Update power state at the end of smu hw_init. drm/amdgpu: Fix vce initialize failed on Kaveri/Mullins drm/amdgpu: Enable/disable gfx PG feature in rlc safe mode drm/amdgpu: Adjust the VM size based on system memory size v2 drm/mediatek: fix connection from RDMA2 to DSI1 drm/mediatek: update some variable name from ovl to comp drm/mediatek: use layer_nr function to get layer number to init plane drm/mediatek: add function to return RDMA layer number drm/mediatek: add function to return OVL layer number drm/mediatek: add function to get layer number for component ...
generated by cgit (git 2.34.1) at 2025-09-12 03:17:47 +0000