summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-12Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.11. Major changes: ath11k * suspend support for QCA6390 PCI devices * support TXOP duration based RTS threshold * mesh: add support for 256 bitmap in blockack frames in 11ax
2020-12-12ath11k: implement suspend for QCA6390 PCI devicesCarl Huang
Now that all the needed pieces are in place implement suspend support QCA6390 PCI devices. All other devices will return -EOPNOTSUPP during suspend. The suspend is implemented by switching the firmware to WoW mode during suspend, so the firmware will be running on low power mode while host is in suspend. At the moment we are not able to shutdown and fully power off the device due to bugs in MHI subsystem, so WoW mode is a workaround for the time being. During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to suspend state. During resume, driver resumes MHI firstly, then enables CE irq and dp IRQ, and sends WoW wakeup command to firmware. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-11-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: hif: add ce irq enable and disable functionsCarl Huang
Add ce irq enable and disable hif layer functions, so core module can enable enable them without cleaning pipe and refilling pipe. Needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-10-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: implement WoW enable and wakeup commandsCarl Huang
Implement wow enable ane wow wakeup commands which are needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-9-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: set credit_update flag for flow controlled ep onlyCarl Huang
Firmware will check all the pipes before entering WoW mode during suspend. If ATH11K_HTC_FLAG_NEED_CREDIT_UPDATE is set, firmware treats this pipe needed to return credit even though it's actually not required. If any pipe needs to return credit, the suspend_complete message doesn't send to host but is dropped. So host gets time out and WoW suspend failed. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-8-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: dp: stop rx pktlog before suspendCarl Huang
Stop dp rx pktlog when entering suspend and reap the mon_status buffer to keep it empty. During resume restart the reap timer. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-7-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: htc: implement suspend handlingCarl Huang
When ath11k sends suspend command to firmware, firmware will return suspend_complete events and add handlers for those. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-6-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: htc: remove unused struct ath11k_htc_opsKalle Valo
No need for it so remove. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-5-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: read select_window register to ensure write is finishedCarl Huang
Just when resume from WoW, the write to select_window doesn't take effect immediately, so read the register again to ensure the write operation is finished. Another change is to reset select_window to ZERO because this register isn't restored after WoW, so the content of this register becomes ZERO too. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-4-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: hif: implement suspend and resume functionsCarl Huang
For suspend support add suspend and resume to HIF layer. These ops are optional and, for example, AHB bus driver does not need to implement these. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-3-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: mhi: hook suspend and resumeCarl Huang
MHI suspend and resume isn't hooked in ath11k yet, so hook these functions needed for suspend support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-2-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: Fix incorrect tlvs in scan start commandPradeep Kumar Chitrapu
Currently 6G specific tlvs have duplicate entries which is causing scan failures. Fix this by removing the duplicate entries of the same tlv. This also fixes out-of-bound memory writes caused due to adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Fixes: 74601ecfef6e ("ath11k: Add support for 6g scan hint") Reported-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-7-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: disable VDD4BLOWCarl Huang
It's recommended to disable VDD4BLOW during initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-6-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: fix L1ss clock unstable problemCarl Huang
For QCA6390, one PCI related clock drifts sometimes, and it makes PCI link difficult to quit L1ss. Fix it by writing some registers which are known to fix the problem. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-5-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: fix hot reset stability issuesCarl Huang
For QCA6390, host needs to reset some registers before MHI power up to fix PCI link unstable issue if hot reset happened. Also clear all pending interrupts during power up. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-4-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDIDCarl Huang
It's recommended to use wmi command WMI_PDEV_SET_HW_MODE_CMDID to put hardware to dbs mode instead of wmi_init command. This fixes a few strange stability issues. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-3-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: mhi: print a warning if firmware crashedKalle Valo
There was no way to detect if the firmware crashed so add a warning. At the moment the firmware is not restarted or anything like that, so when this happens ath11k modules need to be reloaded. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-2-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: use MHI provided APIs to allocate and free MHI controllerBhaumik Bhatt
Use MHI provided APIs to allocate and free MHI controller to improve MHI host driver handling. This also fixes a memory leak as the MHI controller was allocated but never freed. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605634436-36506-1-git-send-email-bbhatt@codeaurora.org
2020-12-12ath10k: add atomic protection for device recoveryWen Gong
When it has more than one restart_work queued meanwhile, the 2nd restart_work is very easy to break the 1st restart work and lead recovery fail. Add a flag to allow only one restart work running untill device successfully recovered. It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this flag again, because it is clear in ath10k_core_start. The function ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do many things and drv_start(call to ath10k_core_start) is 1st thing, when drv_start complete, it does not mean restart complete. So it add new flag and clear it in ath10k_reconfig_complete, because it is the last thing called from drv_reconfig_complete of function ieee80211_reconfig, after it, the restart process finished. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com
2020-12-12ath10k: add option for chip-id based BDF selectionAbhishek Kumar
In some devices difference in chip-id should be enough to pick the right BDF. Add another support for chip-id based BDF selection. With this new option, ath10k supports 2 fallback options. The board name with chip-id as option looks as follows board name 'bus=snoc,qmi-board-id=ff,qmi-chip-id=320' Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00696-QCAHLSWMTPL-1 Tested-on: QCA6174 HW3.2 WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Signed-off-by: Abhishek Kumar <kuabhs@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201207231824.v3.1.Ia6b95087ca566f77423f3802a78b946f7b593ff5@changeid
2020-12-11Input: sc27xx - add support for sc2730 and sc2721Nemo Han
Add new compatible strings and match data to support sc2730 and sc2721 which are two varieties of SC27XX family. Signed-off-by: Nemo Han <nemo.han@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20201117034949.47877-2-zhang.lyra@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11dt-bindings: input: Add compatible string for SC2721 and SC2730Chunyan Zhang
Add new compatible strings to support sc2730 and sc2721 which are two varieties of SC27XX family. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201117034949.47877-4-zhang.lyra@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11dt-bindings: input: Convert sc27xx-vibra.txt to json-schemaChunyan Zhang
Convert the sprd sc27xx vibrator binding to DT schema using json-schema. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201117034949.47877-3-zhang.lyra@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20201210135746.1492-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-12pinctrl: mediatek: simplify the return expression of ↵Zheng Yongjun
mtk_pinconf_bias_disable_set_rev1() Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201210135902.1548-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-12gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201210135609.1372-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-11Input: stmpe - add axis inversion and swapping capabilityStefan Riedmueller
Make use of generic touchscreen_properties structure to add axis inversion and swapping capabilities. It's configurable via devicetree properties: touchscreen-inverted-x touchscreen-inverted-y touchscreen-swapped-x-y Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Link: https://lore.kernel.org/r/20200922093903.157232-1-s.riedmueller@phytec.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: goodix - add upside-down quirk for Teclast X98 Pro tabletSimon Beginn
The touchscreen on the Teclast x98 Pro is also mounted upside-down in relation to the display orientation. Signed-off-by: Simon Beginn <linux@simonmicro.de> Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11tools/kvm_stat: Exempt time-based countersStefan Raspl
The new counters halt_poll_success_ns and halt_poll_fail_ns do not count events. Instead they provide a time, and mess up our statistics. Therefore, we should exclude them. Removal is currently implemented with an exempt list. If more counters like these appear, we can think about a more general rule like excluding all fields name "*_ns", in case that's a standing convention. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Tested-and-reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20201208210829.101324-1-raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11KVM: mmu: Fix SPTE encoding of MMIO generation upper halfMaciej S. Szmigiero
Commit cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") cleaned up the computation of MMIO generation SPTE masks, however it introduced a bug how the upper part was encoded: SPTE bits 52-61 were supposed to contain bits 10-19 of the current generation number, however a missing shift encoded bits 1-10 there instead (mostly duplicating the lower part of the encoded generation number that then consisted of bits 1-9). In the meantime, the upper part was shrunk by one bit and moved by subsequent commits to become an upper half of the encoded generation number (bits 9-17 of bits 0-17 encoded in a SPTE). In addition to the above, commit 56871d444bc4 ("KVM: x86: fix overlap between SPTE_MMIO_MASK and generation") has changed the SPTE bit range assigned to encode the generation number and the total number of bits encoded but did not update them in the comment attached to their defines, nor in the KVM MMU doc. Let's do it here, too, since it is too trivial thing to warrant a separate commit. Fixes: cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <156700708db2a5296c5ed7a8b9ac71f1e9765c85.1607129096.git.maciej.szmigiero@oracle.com> Cc: stable@vger.kernel.org [Reorganize macros so that everything is computed from the bit ranges. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11KVM: x86: reinstate vendor-agnostic check on SPEC_CTRL cpuid bitsPaolo Bonzini
Until commit e7c587da1252 ("x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP"), KVM was testing both Intel and AMD CPUID bits before allowing the guest to write MSR_IA32_SPEC_CTRL and MSR_IA32_PRED_CMD. Testing only Intel bits on VMX processors, or only AMD bits on SVM processors, fails if the guests are created with the "opposite" vendor as the host. While at it, also tweak the host CPU check to use the vendor-agnostic feature bit X86_FEATURE_IBPB, since we only care about the availability of the MSR on the host here and not about specific CPUID bits. Fixes: e7c587da1252 ("x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP") Cc: stable@vger.kernel.org Reported-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11KVM: x86: Expose AVX512_FP16 for supported CPUIDCathy Zhang
AVX512_FP16 is supported by Intel processors, like Sapphire Rapids. It could gain better performance for it's faster compared to FP32 if the precision or magnitude requirements are met. It's availability is indicated by CPUID.(EAX=7,ECX=0):EDX[bit 23]. Expose it in KVM supported CPUID, then guest could make use of it; no new registers are used, only new instructions. Signed-off-by: Cathy Zhang <cathy.zhang@intel.com> Signed-off-by: Kyung Min Park <kyung.min.park@intel.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Message-Id: <20201208033441.28207-3-kyung.min.park@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11x86: Enumerate AVX512 FP16 CPUID feature flagKyung Min Park
Enumerate AVX512 Half-precision floating point (FP16) CPUID feature flag. Compared with using FP32, using FP16 cut the number of bits required for storage in half, reducing the exponent from 8 bits to 5, and the mantissa from 23 bits to 10. Using FP16 also enables developers to train and run inference on deep learning models fast when all precision or magnitude (FP32) is not needed. A processor supports AVX512 FP16 if CPUID.(EAX=7,ECX=0):EDX[bit 23] is present. The AVX512 FP16 requires AVX512BW feature be implemented since the instructions for manipulating 32bit masks are associated with AVX512BW. The only in-kernel usage of this is kvm passthrough. The CPU feature flag is shown as "avx512_fp16" in /proc/cpuinfo. Signed-off-by: Kyung Min Park <kyung.min.park@intel.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Message-Id: <20201208033441.28207-2-kyung.min.park@intel.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11selftests: kvm: Merge user_msr_test into userspace_msr_exit_testAaron Lewis
Both user_msr_test and userspace_msr_exit_test tests the functionality of kvm_msr_filter. Instead of testing this feature in two tests, merge them together, so there is only one test for this feature. Signed-off-by: Aaron Lewis <aaronlewis@google.com> Message-Id: <20201204172530.2958493-1-aaronlewis@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11selftests: kvm: Test MSR exiting to userspaceAaron Lewis
Add a selftest to test that when the ioctl KVM_X86_SET_MSR_FILTER is called with an MSR list, those MSRs exit to userspace. This test uses 3 MSRs to test this: 1. MSR_IA32_XSS, an MSR the kernel knows about. 2. MSR_IA32_FLUSH_CMD, an MSR the kernel does not know about. 3. MSR_NON_EXISTENT, an MSR invented in this test for the purposes of passing a fake MSR from the guest to userspace. KVM just acts as a pass through. Userspace is also able to inject a #GP. This is demonstrated when MSR_IA32_XSS and MSR_IA32_FLUSH_CMD are misused in the test. When this happens a #GP is initiated in userspace to be thrown in the guest which is handled gracefully by the exception handling framework introduced earlier in this series. Tests for the generic instruction emulator were also added. For this to work the module parameter kvm.force_emulation_prefix=1 has to be enabled. If it isn't enabled the tests will be skipped. A test was also added to ensure the MSR permission bitmap is being set correctly by executing reads and writes of MSR_FS_BASE and MSR_GS_BASE in the guest while alternating which MSR userspace should intercept. If the permission bitmap is being set correctly only one of the MSRs should be coming through at a time, and the guest should be able to read and write the other one directly. Signed-off-by: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Alexander Graf <graf@amazon.com> Message-Id: <20201012194716.3950330-5-aaronlewis@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11KVM/VMX: Use TEST %REG,%REG instead of CMP $0,%REG in vmenter.SUros Bizjak
Saves one byte in __vmx_vcpu_run for the same functionality. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Message-Id: <20201029140457.126965-1-ubizjak@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11RDMA/rxe: Use acquire/release for memory orderingBob Pearson
Change work and completion queues to use smp_load_acquire() and smp_store_release() to synchronize between driver and users. This commit goes with a matching series of commits in the rxe user space provider. Link: https://lore.kernel.org/r/20201210174258.5234-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-12gpiolib: irq hooks: fix recursion in gpiochip_irq_unmaskNikita Shubin
irqchip shared with multiple gpiochips, leads to recursive call of gpiochip_irq_mask/gpiochip_irq_unmask which was assigned to rqchip->irq_mask/irqchip->irq_unmask, these happens becouse of only irqchip->irq_enable == gpiochip_irq_enable is checked. Let's add an additional check to make sure shared irqchip is detected even if irqchip->irq_enable wasn't defined. Fixes: a8173820f441 ("gpio: gpiolib: Allow GPIO IRQs to lazy disable") Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Link: https://lore.kernel.org/r/20201210070514.13238-1-nikita.shubin@maquefel.me Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-12dt-bindings: mt7621-gpio: convert bindings to YAML formatSergio Paracuellos
Convert the mt7621-gpio device tree bindings to the new YAML format. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201207081151.7489-1-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-11PCI/ACPI: Fix companion lookup for device 0 on the root busRafael J. Wysocki
In some cases acpi_pci_find_companion() returns an incorrect device object as the ACPI companion for device 0 on the root bus (bus 0). On the affected systems that device is the PCI interface to the host bridge and the "ACPI companion" returned for it corresponds to a non-PCI device located in the SoC (e.g. a sensor on an I2C bus). As a result of this, the ACPI device object "attached" to PCI device 00:00.0 cannot be used for enumerating the device that is really represented by it which (of course) is problematic. Address that issue by preventing acpi_pci_find_companion() from returning a device object with a valid _HID (which by the spec should not be present uder ACPI device objects corresponding to PCI devices) for PCI device 00:00.0. [bhelgaas: use pci_is_root_bus()] Link: https://lore.kernel.org/linux-acpi/1409ba0c-1580-dc09-e6fe-a0c9bcda6462@gmail.com/ Link: https://lore.kernel.org/r/4673285.9aE2nYKHPr@kreacher Reported-by: Daniel Scally <djrscally@gmail.com> Tested-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Scally <djrscally@gmail.com>
2020-12-11dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq supportLars Povlsen
This describe the new bindings for the added IRQ support in the pinctrl-microchip-sgpio driver. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201209142753.683208-3-lars.povlsen@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-11pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)Lars Povlsen
This adds 'interrupt-controller' features for the signals available on the Microchip SGPIO controller, however only for controller versions on the Sparx5 platform (or later). Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Link: https://lore.kernel.org/r/20201209142753.683208-2-lars.povlsen@microchip.com [Select GPIOLIB_IRQCHIP in Kconfig] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-11Merge tag 'mtd/fixes-for-5.10-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: "Second series of fixes for raw NAND drivers initiated because of a rework of the ECC engine subsystem. The location of the DT parsing logic got moved, breaking several drivers which in fact were not doing the ECC engine initialization at the right place. These drivers have been fixed by enforcing a particular ECC engine type and algorithm, software Hamming, while the algorithm may be overwritten by a DT property. This merge request fixes this in the xway, socrates, plat_nand, pasemi, orion, mpc5121, gpio, au1550 and ams-delta controller drivers" * tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: xway: Do not force a particular software ECC engine mtd: rawnand: socrates: Do not force a particular software ECC engine mtd: rawnand: plat_nand: Do not force a particular software ECC engine mtd: rawnand: pasemi: Do not force a particular software ECC engine mtd: rawnand: orion: Do not force a particular software ECC engine mtd: rawnand: mpc5121: Do not force a particular software ECC engine mtd: rawnand: gpio: Do not force a particular software ECC engine mtd: rawnand: au1550: Do not force a particular software ECC engine mtd: rawnand: ams-delta: Do not force a particular software ECC engine
2020-12-11Merge tag 'mmc-v5.10-rc4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes: MMC core: - Fixup condition for CMD13 polling for RPMB requests MMC host: - mtk-sd: Fix system suspend/resume support for CQHCI - mtd-sd: Extend SDIO IRQ fix to more variants - sdhci-of-arasan: Fix clock registration error for Keem Bay SOC - tmio: Bring HW to a sane state after a power off" * tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mediatek: mark PM functions as __maybe_unused mmc: block: Fixup condition for CMD13 polling for RPMB requests mmc: tmio: improve bringing HW to a sane state with MMC_POWER_OFF mmc: sdhci-of-arasan: Fix clock registration error for Keem Bay SOC mmc: mediatek: Extend recheck_sdio_irq fix to more variants mmc: mediatek: Fix system suspend/resume support for CQHCI
2020-12-11Merge tag 'at24-fixes-for-v5.10' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current at24 fixes for v5.10 - fix NVMEM name with custom AT24 device name
2020-12-11Merge tag 'zonefs-5.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fix from Damien Le Moal: "A single patch in this pull request to fix a BIO and page reference leak when writing sequential zone files" * tag 'zonefs-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: fix page reference and BIO leak
2020-12-11tick/sched: Make jiffies update quick check more robustThomas Gleixner
The quick check in tick_do_update_jiffies64() whether jiffies need to be updated is not really correct under all circumstances and on all architectures, especially not on 32bit systems. The quick check does: if (now < READ_ONCE(tick_next_period)) return; and the counterpart in the update is: WRITE_ONCE(tick_next_period, next_update_time); This has two problems: 1) On weakly ordered architectures there is no guarantee that the stores before the WRITE_ONCE() are visible which means that other CPUs can operate on a stale jiffies value. 2) On 32bit the store of tick_next_period which is an u64 is split into two 32bit stores. If the first 32bit store advances tick_next_period far out and the second 32bit store is delayed (virt, NMI ...) then jiffies will become stale until the second 32bit store happens. Address this by seperating the handling for 32bit and 64bit. On 64bit problem #1 is addressed by replacing READ_ONCE() / WRITE_ONCE() with smp_load_acquire() / smp_store_release(). On 32bit problem #2 is addressed by protecting the quick check with the jiffies sequence counter. The load and stores can be plain because the sequence count mechanics provides the required barriers already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/87czzpc02w.fsf@nanos.tec.linutronix.de
2020-12-11bpf: Fix enum names for bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpersAndrii Nakryiko
Remove bpf_ prefix, which causes these helpers to be reported in verifier dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets fix it as long as it is still possible before UAPI freezes on these helpers. Fixes: eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "8 patches. Subsystems affected by this patch series: proc, selftests, kbuild, and mm (pagecache, kasan, hugetlb)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/hugetlb: clear compound_nr before freeing gigantic pages kasan: fix object remaining in offline per-cpu quarantine elfcore: fix building with clang initramfs: fix clang build failure kbuild: avoid static_assert for genksyms selftest/fpu: avoid clang warning proc: use untagged_addr() for pagemap_read addresses revert "mm/filemap: add static for function __add_to_page_cache_locked"
generated by cgit (git 2.34.1) at 2025-09-20 23:29:59 +0000