summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-17blk-cgroup: show global disk stats in root cgroup io.statBoris Burkov
In order to improve consistency and usability in cgroup stat accounting, we would like to support the root cgroup's io.stat. Since the root cgroup has processes doing io even if the system has no explicitly created cgroups, we need to be careful to avoid overhead in that case. For that reason, the rstat algorithms don't handle the root cgroup, so just turning the file on wouldn't give correct statistics. To get around this, we simulate flushing the iostat struct by filling it out directly from global disk stats. The result is a root cgroup io.stat file consistent with both /proc/diskstats and io.stat. Note that in order to collect the disk stats, we needed to iterate over devices. To facilitate that, we had to change the linkage of a disk_type to external so that it can be used from blk-cgroup.c to iterate over disks. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Boris Burkov <boris@bur.io> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-17blk-cgroup: make iostat functions visible to stat printingBoris Burkov
Previously, the code which printed io.stat only needed access to the generic rstat flushing code, but since we plan to write some more specific code for preparing root cgroup stats, we need to manipulate iostat structs directly. Since declaring static functions ahead does not seem like common practice in this file, simply move the iostat functions up. We only plan to use blkg_iostat_set, but it seems better to keep them all together. Signed-off-by: Boris Burkov <boris@bur.io> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-17mlxsw: core: Fix wrong SFP EEPROM reading for upper pages 1-3Vadim Pasternak
Fix wrong reading of upper pages for SFP EEPROM. According to "Memory Organization" figure in SFF-8472 spec: When reading upper pages 1, 2 and 3 the offset should be set relative to zero and I2C high address 0x51 [1010001X (A2h)] is to be used. Fixes: a45bfb5a5070 ("mlxsw: core: Extend QSFP EEPROM size for ethtool") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: hsr: validate address B before copying to skbMurali Karicheri
Validate MAC address before copying the same to outgoing frame skb destination address. Since a node can have zero mac address for Link B until a valid frame is received over that link, this fix address the issue of a zero MAC address being in the packet. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: hsr: fix incorrect lsdu size in the tag of HSR frames for small framesMurali Karicheri
For small Ethernet frames with size less than minimum size 66 for HSR vs 60 for regular Ethernet frames, hsr driver currently doesn't pad the frame to make it minimum size. This results in incorrect LSDU size being populated in the HSR tag for these frames. Fix this by padding the frame to the minimum size applicable for HSR. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17io_uring: ensure double poll additions work with both request typesJens Axboe
The double poll additions were centered around doing POLL_ADD on file descriptors that use more than one waitqueue (typically one for read, one for write) when being polled. However, it can also end up being triggered for when we use poll triggered retry. For that case, we cannot safely use req->io, as that could be used by the request type itself. Add a second io_poll_iocb pointer in the structure we allocate for poll based retry, and ensure we use the right one from the two paths. Fixes: 18bceab101ad ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-17rhashtable: drop duplicated word in <linux/rhashtable.h>Randy Dunlap
Drop the doubled word "be" in a comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Graf <tgraf@suug.ch> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: macb: use phy_interface_mode_is_rgmii everywhereAlexandre Belloni
There is one RGMII check not using the phy_interface_mode_is_rgmii() helper. This prevents the driver from configuring the MAC properly when using a phy-mode that is not just rgmii, e.g. rgmii-rxid. This became an issue on sama5d3 xplained since the ksz9031 driver is hadling phy-mode properly and the phy-mode has to be set to rgmii-rxid. Fixes: bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: atlantic: disable PTP on AQC111, AQC112Nikita Danilov
This patch disables PTP on AQC111 and AQC112 due to a known HW issue, which can cause datapath issues. Ideally PTP block should have been disabled via PHY provisioning, but unfortunately many units have been shipped with enabled PTP block. Thus, we have to work around this in the driver. Fixes: dbcd6806af420 ("net: aquantia: add support for Phy access") Signed-off-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-18futex: Remove unused or redundant includesAndré Almeida
Since 82af7aca ("Removal of FUTEX_FD"), some includes related to file operations aren't needed anymore. More investigation around the includes showed that a lot of includes aren't required for compilation, possible due to redundant includes. Simplify the code by removing unused includes. Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200702202843.520764-4-andrealmeid@collabora.com
2020-07-18futex: Consistently use fshared as booleanAndré Almeida
Since fshared is only conveying true/false values, declare it as bool. In get_futex_key() the usage of fshared can be restricted to the first part of the function. If fshared is false the function is terminated early and the subsequent code can use a constant 'true' instead of the variable. Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200702202843.520764-5-andrealmeid@collabora.com
2020-07-17Merge tag 'nfs-for-5.8-3' of git://git.linux-nfs.org/projects/anna/linux-nfs ↵Linus Torvalds
into master Pull NFS client fixes from Anna Schumaker: "A few more NFS client bugfixes for Linux 5.8: NFS: - Fix interrupted slots by using the SEQUENCE operation SUNRPC: - revert d03727b248d0 to fix unkillable IOs xprtrdma: - Fix double-free in rpcrdma_ep_create() - Fix recursion into rpcrdma_xprt_disconnect() - Fix return code from rpcrdma_xprt_connect() - Fix handling of connect errors - Fix incorrect header size calculations" * tag 'nfs-for-5.8-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion") xprtrdma: fix incorrect header size calculations NFS: Fix interrupted slots by sending a solo SEQUENCE operation xprtrdma: Fix handling of connect errors xprtrdma: Fix return code from rpcrdma_xprt_connect() xprtrdma: Fix recursion into rpcrdma_xprt_disconnect() xprtrdma: Fix double-free in rpcrdma_ep_create()
2020-07-17Merge tag 'arm-fixes-5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master Pull ARM SoC fixes from Arnd Bergmann: "This time there are a number of actual code fixes, plus a small set of device tree issues getting addressed: Renesas: - one defconfig cleanup to allow a later Kconfig change Intel socfpga: - enable QSPI devices on some machines - fix DTC validation warnings TI OMAP: - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module driver - A regression fix for ti-sysc no-idle handling that caused issues compared to earlier platform data based booting - A fix for memory leak for omap_hwmod_allocate_module - Fix d_can driver probe for am437x NXP i.MX: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. Amlogic Meson: - misc DT fixes - SoC ID fixes to detect all chips correctly" * tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node ARM: dts: Fix dcan driver probe failed on am437x platform ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI bus: ti-sysc: Do not disable on suspend for no-idle bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk bus: ti-sysc: Fix wakeirq sleeping function called from invalid context ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
2020-07-17Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into master Pull arm64 fixes from Will Deacon: "A batch of arm64 fixes. Although the diffstat is a bit larger than we'd usually have at this stage, a decent amount of it is the addition of comments describing our syscall tracing behaviour, and also a sweep across all the modular arm64 PMU drivers to make them rebust against unloading and unbinding. There are a couple of minor things kicking around at the moment (CPU errata and module PLTs for very large modules), but I'm not expecting any significant changes now for us in 5.8. - Fix kernel text addresses for relocatable images booting using EFI and with KASLR disabled so that they match the vmlinux ELF binary. - Fix unloading and unbinding of PMU driver modules. - Fix generic mmiowb() when writeX() is called from preemptible context (reported by the riscv folks). - Fix ptrace hardware single-step interactions with signal handlers, system calls and reverse debugging. - Fix reporting of 64-bit x0 register for 32-bit tasks via 'perf_regs'. - Add comments describing syscall entry/exit tracing ABI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: drivers/perf: Prevent forced unbinding of PMU drivers asm-generic/mmiowb: Allow mmiowb_set_pending() when preemptible() arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP arm64: ptrace: Use NO_SYSCALL instead of -1 in syscall_trace_enter() arm64: syscall: Expand the comment about ptrace and syscall(-1) arm64: ptrace: Add a comment describing our syscall entry/exit trap ABI arm64: compat: Ensure upper 32 bits of x0 are zero on syscall return arm64: ptrace: Override SPSR.SS when single-stepping is enabled arm64: ptrace: Consistently use pseudo-singlestep exceptions drivers/perf: Fix kernel panic when rmmod PMU modules during perf sampling efi/libstub/arm64: Retain 2MB kernel Image alignment if !KASLR
2020-07-17futex: Remove needless goto'sAndré Almeida
As stated in the coding style documentation, "if there is no cleanup needed then just return directly", instead of jumping to a label and then returning. Remove such goto's and replace with a return statement. When there's a ternary operator on the return value, replace it with the result of the operation when it is logically possible to determine it by the control flow. Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200702202843.520764-3-andrealmeid@collabora.com
2020-07-17futex: Remove put_futex_key()André Almeida
Since 4b39f99c ("futex: Remove {get,drop}_futex_key_refs()"), put_futex_key() is empty. Remove all references for this function and the then redundant labels. Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200702202843.520764-2-andrealmeid@collabora.com
2020-07-17genirq/affinity: Handle affinity setting on inactive interrupts correctlyThomas Gleixner
Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests. X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS. Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then: - Store it in the irq descriptors affinity mask - Update the effective affinity to reflect that so user space has a consistent view - Don't call into the irq chip driver This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on. Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations. For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design. Remove the X86 workaround as it is not longer required. Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts") Reported-by: Ali Saidi <alisaidi@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ali Saidi <alisaidi@amazon.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
2020-07-17debugobjects: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. [ tglx: Distangled it from the mess in -next ] Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: hch@lst.de Link: https://lkml.kernel.org/r/20200716084747.8034-1-miaoqinglang@huawei.com
2020-07-17arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domainsRajendra Nayak
Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1594292674-15632-5-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-17arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domainsRajendra Nayak
Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain. Tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1594292674-15632-4-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-17nfc: nci: add missed destroy_workqueue in nci_register_deviceWang Hai
When nfc_register_device fails in nci_register_device, destroy_workqueue() shouled be called to destroy ndev->tx_wq. Fixes: 3c1c0f5dc80b ("NFC: NCI: Fix nci_register_device init sequence") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17Merge branch 'bcmgenet-WAKE_FILTER'David S. Miller
Doug Berger says: ==================== net: bcmgenet: fix WAKE_FILTER resume from deep sleep The WAKE_FILTER logic can only wake the system from the standby power state. However, some systems that include the GENET IP support deeper power saving states and the driver should suspend and resume correctly from those states as well. This commit set squashes a few issues uncovered while testing suspend and resume from these deep sleep states. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: bcmgenet: restore HFB filters on resumeDoug Berger
The Hardware Filter Block RAM may not be preserved when the GENET block is reset during a deep sleep, so it is not sufficient to only backup and restore the enables. This commit clears out the HFB block and reprograms the rxnfc rules when the system resumes from a suspended state. To support this the bcmgenet_hfb_create_rxnfc_filter() function is modified to access the register space directly so that it can't fail due to memory allocation issues. Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: bcmgenet: test RBUF_ACPI_EN when resumingDoug Berger
When the GENET driver resumes from deep sleep the UMAC_CMD register may not be accessible and therefore should not be accessed from bcmgenet_wol_power_up_cfg() if the GENET has been reset. This commit adds a check of the RBUF_ACPI_EN flag when Wake on Filter is enabled. A clear flag indicates that the GENET hardware must have been reset so the remainder of the hardware programming is bypassed. Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: bcmgenet: test MPD_EN when resumingDoug Berger
When the GENET driver resumes from deep sleep the UMAC_CMD register may not be accessible and therefore should not be accessed from bcmgenet_wol_power_up_cfg() if the GENET has been reset. This commit adds a check of the MPD_EN flag when Wake on Magic Packet is enabled. A clear flag indicates that the GENET hardware must have been reset so the remainder of the hardware programming is bypassed. Fixes: 1a1d5106c1e3 ("net: bcmgenet: move clk_wol management to bcmgenet_wol") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17selftests: net: ip_defrag: modprobe missing nf_defrag_ipv6 supportPaolo Pisati
Fix ip_defrag.sh when CONFIG_NF_DEFRAG_IPV6=m: $ sudo ./ip_defrag.sh + set -e + mktemp -u XXXXXX + readonly NETNS=ns-rGlXcw + trap cleanup EXIT + setup + ip netns add ns-rGlXcw + ip -netns ns-rGlXcw link set lo up + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_high_thresh=9000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_low_thresh=7000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_time=1 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_high_thresh=9000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_low_thresh=7000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_time=1 + ip netns exec ns-rGlXcw sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000 + cleanup + ip netns del ns-rGlXcw $ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh ls: cannot access '/proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh': No such file or directory $ sudo modprobe nf_defrag_ipv6 $ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh -rw-r--r-- 1 root root 0 Jul 14 12:34 /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: smc91x: Fix possible memory leak in smc_drv_probe()Wang Hai
If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev) should be called to free the ndev created earlier. Otherwise, a memleak will occur. Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17timer: Fix wheel index calculation on last levelFrederic Weisbecker
When an expiration delta falls into the last level of the wheel, that delta has be compared against the maximum possible delay and reduced to fit in if necessary. However instead of comparing the delta against the maximum, the code compares the actual expiry against the maximum. Then instead of fixing the delta to fit in, it sets the maximum delta as the expiry value. This can result in various undesired outcomes, the worst possible one being a timer expiring 15 days ahead to fire immediately. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.org
2020-07-17rtnetlink: Fix memory(net_device) leak when ->newlink failsWeilong Chen
When vlan_newlink call register_vlan_dev fails, it might return error with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should free the memory. But currently rtnl_newlink only free the memory which state is NETREG_UNINITIALIZED. BUG: memory leak unreferenced object 0xffff8881051de000 (size 4096): comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s) hex dump (first 32 bytes): 76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00 vlan2........... 00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00 .E(............. backtrace: [<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline] [<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574 [<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline] [<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline] [<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929 [<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067 [<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329 [<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397 [<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460 [<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469 [<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] [<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329 [<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918 [<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline] [<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672 [<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352 [<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406 [<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439 [<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO ↵Olga Kornievskaia
compeletion") Reverting commit d03727b248d0 "NFSv4 fix CLOSE not waiting for direct IO compeletion". This patch made it so that fput() by calling inode_dio_done() in nfs_file_release() would wait uninterruptably for any outstanding directIO to the file (but that wait on IO should be killable). The problem the patch was also trying to address was REMOVE returning ERR_ACCESS because the file is still opened, is supposed to be resolved by server returning ERR_FILE_OPEN and not ERR_ACCESS. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-07-17Merge tag 'tegra-for-5.9-arm64-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.9-rc1 This contains a slew of fixes in preparation for validating device trees against json-schema bindings. In addition, this enables the CPU complex (for CPU frequency scaling) and GPU on Tegra194. * tag 'tegra-for-5.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (56 commits) arm64: tegra: Add the GPU on Tegra194 arm64: tegra: Add compatible string for Tegra194 CPU complex arm64: tegra: Add HDMI supplies on Norrin arm64: tegra: Add #{address,size}-cells for VI I2C on Tegra210 arm64: tegra: Add missing clocks and power-domains to Tegra210 VI I2C arm64: tegra: Add clocks and resets for ISP on Tegra210 arm64: tegra: Fix compatible string for DPAUX on Tegra210 arm64: tegra: Add i2c-bus subnode for DPAUX controllers arm64: tegra: Sort aliases alphabetically arm64: tegra: Remove spurious tabs arm64: tegra: Populate VBUS for USB3 on Jetson TX2 arm64: tegra: Enable DFLL support on Jetson Nano arm64: tegra: Add support for Jetson Xavier NX arm64: tegra: Re-order PCIe aperture mappings arm64: tegra: Enable Tegra VI CSI support for Jetson Nano arm64: tegra: jetson-tx1: Add camera supplies arm64: tegra: Fix order of XUSB controller clocks arm64: tegra: Rename cbb@0 to bus@0 on Tegra194 arm64: tegra: Sort nodes by unit-address on Jetson Nano arm64: tegra: Various fixes for PMICs ... Link: https://lore.kernel.org/r/20200717161300.1661002-7-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'tegra-for-5.9-arm-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.9-rc1 This adds device trees for the ASUS Google Nexus 7 and Acer Iconia Tab A500. In addition there are a slew of fixes to existing device trees in preparation for validating the DTBs against json-schema. * tag 'tegra-for-5.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (38 commits) ARM: tegra: Add device-tree for ASUS Google Nexus 7 ARM: tegra: Add device-tree for Acer Iconia Tab A500 ARM: tegra: Add HDMI supplies on Nyan boards ARM: tegra: Add missing DSI controller on Tegra30 ARM: tegra: Add i2c-bus subnode for DPAUX controllers ARM: tegra: The Tegra30 SDHCI is not backwards-compatible ARM: tegra: The Tegra30 DC is not backwards-compatible ARM: tegra: Remove spurious comma from node name ARM: tegra: Add parent clock to DSI output ARM: tegra: Use standard names for SRAM nodes ARM: tegra: seaboard: Use standard battery bindings ARM: tegra: Use standard names for LED nodes ARM: tegra: Use numeric unit-addresses ARM: tegra: medcom-wide: Remove extra panel power supply ARM: tegra: Use proper unit-addresses for OPPs ARM: tegra: Add missing clock-names for SDHCI controllers ARM: tegra: Fix order of XUSB controller clocks ARM: tegra: Add #reset-cells to Tegra124 memory controller ARM: tegra: Add missing panel power supplies ARM: tegra: Add micro-USB A/B port on Jetson TK1 ... Link: https://lore.kernel.org/r/20200717161300.1661002-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'tegra-for-5.9-dt-bindings' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.9-rc1 This adds compatible strings for some new devices as well as updates and fixes existing bindings. * tag 'tegra-for-5.9-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: fuse: tegra: Add missing compatible strings dt-bindings: i2c: tegra: Document Tegra210 VI I2C clocks and power-domains dt-bindings: Add documentation for GV11B GPU dt-bindings: ARM: tegra: Add ASUS Google Nexus 7 dt-bindings: ARM: tegra: Add Acer Iconia Tab A500 dt-bindings: Add vendor prefix for Acer Inc. dt-bindings: tegra: Document Jetson Xavier NX (and devkit) Link: https://lore.kernel.org/r/20200717161300.1661002-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.9 - meson-gx: Switch to the meson-ee-pwrc bindings - add Khadas MCU nodes * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: amlogic: Add the Ethernet "timing-adjustment" clock arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindings arm64: dts: meson-khadas-vim3: add Khadas MCU nodes Link: https://lore.kernel.org/r/7h8sfif2na.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'amlogic-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: amlogic updates for v5.9 - power-domain and MMC updates * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: enable the SDHC controller ARM: dts: meson8b: ec100: enable the SDHC controller ARM: dts: meson: add the SDHC MMC controller ARM: dts: meson8b: add power domain controller ARM: dts: meson8m2: add resets for the power domain controller ARM: dts: meson8: add power domain controller Link: https://lore.kernel.org/r/7hd04uf2o8.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'io_uring-5.8-2020-07-17' of git://git.kernel.dk/linux-block into ↵Linus Torvalds
master Pull io_uring fix from Jens Axboe: "Fix for a case where, with automatic buffer selection, we can leak the buffer descriptor for recvmsg" * tag 'io_uring-5.8-2020-07-17' of git://git.kernel.dk/linux-block: io_uring: fix recvmsg memory leak with buffer selection
2020-07-17Merge tag 'block-5.8-2020-07-17' of git://git.kernel.dk/linux-block into masterLinus Torvalds
Pull block fix from Jens Axboe: "Single NVMe multipath capacity fix" * tag 'block-5.8-2020-07-17' of git://git.kernel.dk/linux-block: nvme: explicitly update mpath disk capacity on revalidation
2020-07-17Merge tag 'fuse-fixes-5.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse into master Pull fuse fixes from Miklos Szeredi: - two regressions in this cycle caused by the conversion of writepage list to an rb_tree - two regressions in v5.4 cause by the conversion to the new mount API - saner behavior of fsconfig(2) for the reconfigure case - an ancient issue with FS_IOC_{GET,SET}FLAGS ioctls * tag 'fuse-fixes-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS fuse: don't ignore errors from fuse_writepages_fill() fuse: clean up condition for writepage sending fuse: reject options on reconfigure via fsconfig(2) fuse: ignore 'data' argument of mount(..., MS_REMOUNT) fuse: use ->reconfigure() instead of ->remount_fs() fuse: fix warning in tree_insert() and clean up writepage insertion fuse: move rb_erase() before tree_insert()
2020-07-17Merge tag 'ovl-fixes-5.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into master Pull overlayfs fixes from Miklos Szeredi: - fix a regression introduced in v4.20 in handling a regenerated squashfs lower layer - two regression fixes for this cycle, one of which is Oops inducing - miscellaneous issues * tag 'ovl-fixes-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix lookup of indexed hardlinks with metacopy ovl: fix unneeded call to ovl_change_flags() ovl: fix mount option checks for nfs_export with no upperdir ovl: force read-only sb on failure to create index dir ovl: fix regression with re-formatted lower squashfs ovl: fix oops in ovl_indexdir_cleanup() with nfs_export=on ovl: relax WARN_ON() when decoding lower directory file handle ovl: remove not used argument in ovl_check_origin ovl: change ovl_copy_up_flags static ovl: inode reference leak in ovl_is_inuse true case.
2020-07-17docs: ptp.rst: add support for Renesas (IDT) ClockMatrixMin Li
Add below to “Ancillary clock features” section - Low Pass Filter (LPF) access from user space Add below to list of “Supported hardware” section + Renesas (IDT) ClockMatrix™ Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17Merge tag 'spi-fix-v5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into master Pull spi fixes from Mark Brown: "A couple of small driver specific fixes for fairly minor issues" * tag 'spi-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate spi: mediatek: use correct SPI_CFG2_REG MACRO
2020-07-17Merge tag 'regulator-fix-v5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into master Pull regulator fixes from Mark Brown: "The more substantial fix here is the rename of the da903x driver which fixes a collision with the parent MFD driver name which caused issues when things were built as modules. There's also a fix for a mislableled regulator on the pmi8994 which is quite important for systems with that device" * tag 'regulator-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: MAINTAINERS: remove obsolete entry after file renaming regulator: rename da903x to da903x-regulator regulator: qcom_smd: Fix pmi8994 label
2020-07-17Merge tag 'regmap-fix-v5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into master Pull regmap fixes from Mark Brown: "A couple of substantial fixes here, one from Doug which fixes the debugfs code for MMIO regmaps (fortunately not the common case) and one from Marc fixing lookups of multiple regmaps for the same device (a very unusual case). There's also a fix for Kconfig to ensure we enable SoundWire properly" * tag 'regmap-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: debugfs: Don't sleep while atomic for fast_io regmaps regmap: add missing dependency on SoundWire regmap: dev_get_regmap_match(): fix string comparison
2020-07-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid into master Pull HID fixes from Jiri Kosina: - linked list race condition fix in hid-steam driver from Rodrigo Rivas Costa - assorted deviceID-specific quirks and other small cosmetic cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-hidpp: avoid repeated "multiplier = " log messages HID: logitech: Use HIDPP_RECEIVER_INDEX instead of 0xff HID: quirks: Ignore Simply Automated UPB PIM HID: apple: Disable Fn-key key-re-mapping on clone keyboards MAINTAINERS: update uhid and hid-wiimote entry HID: steam: fixes race in handling device list. HID: magicmouse: do not set up autorepeat HID: alps: support devices with report id 2 HID: quirks: Always poll Obins Anne Pro 2 keyboard HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override
2020-07-17RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorwPalmer Dabbelt
While digging through the recent mmiowb preemption issue it came up that we aren't actually preventing IO from crossing a scheduling boundary. While it's a bit ugly to overload smp_mb__after_spinlock() with this behavior, it's what PowerPC is doing so there's some precedent. Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-17Merge tag 'asoc-fix-v5.8-rc5' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.8 An awful lot of mostly small fixes here, mainly for x86 based platforms and the CODEC drivers mainly used on them. For the most part this is either minor device specific stuff which seems to come from detailed testing or robustness against errors which comes from people having done some fuzzing runs aginst the topology code.
2020-07-17Merge tag 'socfpga_fixes_for_v5.8_v2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm/arm64: dts: socfpga: fixes for v5.8 - Add status = "okay" in QSPI - Increase QSPI size in reg property - Fix dtschema for SoCFPGA platforms * tag 'socfpga_fixes_for_v5.8_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node Link: https://lore.kernel.org/r/20200717155758.18233-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'renesas-fixes-for-v5.8-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.8 - Replace CONFIG_PCIE_RCAR by CONFIG_PCIE_RCAR_HOST in the defconfig, to unblock a planned Kconfig change. * tag 'renesas-fixes-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST Link: https://lore.kernel.org/r/20200717100523.15418-1-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'sound-5.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into master Pull sound fixes from Takashi Iwai: "No surprise here, just a few device-specific small fixes: two fixes for USB LINE6 and one for USB-audio drivers wrt syzkaller fuzzer issues, while the rest are all HD-audio Realtek quirks" * tag 'sound-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - fixup for yet another Intel reference board ALSA: hda/realtek - Enable Speaker for ASUS UX563 ALSA: hda/realtek - Enable Speaker for ASUS UX533 and UX534 ALSA: hda/realtek: Enable headset mic of Acer TravelMate B311R-31 with ALC256 ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G14(G401) series with ALC289 ALSA: hda/realtek - change to suitable link model for ASUS platform ALSA: usb-audio: Fix race against the error recovery URB submission ALSA: line6: Sync the pending work cancel at disconnection ALSA: line6: Perform sanity check for each URB creation
2020-07-17x86/efi: Remove unused EFI_UV1_MEMMAP codesteve.wahl@hpe.com
With UV1 support removed, EFI_UV1_MEMMAP is no longer used. Signed-off-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lkml.kernel.org/r/20200713212956.019149227@hpe.com
generated by cgit (git 2.34.1) at 2025-09-23 04:22:11 +0000