summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-08V4L/DVB: cx25840: Add support for CX2388[57] A/V core integrated IR controllersAndy Walls
This patch is primarily a port of the integrated IR controller code in cx23885/cx23888-ir.c. Right now, only the CX2388[57] AV core will really try to set up IR. This IR support, by design, still requires the bridge driver to do final IO pin mux configuration and setup of the IR controller parameters. For the CX2388[578] chips, enabling the AV Core for IR also starts sending Audio and Video interrupts to the bridge driver. For CX2388[578] chips audio and video interrupts are ignored and acknowledged when they happen. IR interrupt handling and status logging is exluded for the CX23888 which does not have an IR controller on the AV core. Note that experimentation reveals that the IR irq enables on the CX23885 have an inverted logic sense. The CX23887 likely suffers from the same quirk. For these chips, those irq enable bits are handled as interrupt disables. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: v4l2_subdev: Move interrupt_service_routine ptr to v4l2_subdev_core_opsAndy Walls
The CX2584x and related cores are multifunction subdevices with a number of internal blocks that act as interrupt sources. Move the v4L2_subdev interrupt_service_routine callback from v4l_subdev_ir_ops to v4l2_subdev_core_ops, as the video and audio blocks of a CX2584x and related cores can generate interrupts along with the IR block. This change also makes sense for other subdev's that generate interrupts and do not have an IR block. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx23885: For CX23888 IR, configure the IO pin mux IR pins explcitlyAndy Walls
Explicitly configure the IR Tx and IR Rx pins to be driven by the IR Rx and Tx pads from the AV core for CX23888 IR. For the HVR-1850 and HVR-1290 configure the IR Tx level inversion, so the Tx LED is off when idle. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: v4l2_subdev, cx23885: Differentiate IR carrier sense and I/O pin ↵Andy Walls
inversion There is a distinction on IR Tx for the CX2388[578] chips of carrier sense inversion (space is a carrier burst and mark is no burst) and I/O pin level inversion (0 is high output level, 1 is low output level). Allow the caller to set these parameters distinctly as v4l2_subdevice IR parameters. This permits the IR device to be configured and enabled without the IR Tx LED being on during idle/space time due to an external hardware level inversion Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx25840: Add s_io_pin_config core subdev ops for the CX2388[578]Andy Walls
Add s_io_pin_config core subdev op for the CX2388[578] AV cores. This is complete for IR_RX, IR_TX, GPIOs 16,19-23, and IRQ_N. It likely needs work for the I2S signal direction. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: v4l2_subdev: Add s_io_pin_config to v4l2_subdev_core_opsAndy Walls
Add a method to v4l2_sudev_core_ops to allow bridge drivers to manage what signal pads/functions are routed out to multiplexed IO pins on a pin by pin basis. The interface also allows specifying initial output settings for pins and disabling an IO pin altogether. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx23885: Add a VIDIOC_LOG_STATUS ioctl function for analog video ↵Andy Walls
devices Add a simple log_status function for raw analog video capture device nodes, to provide insight into the state of the CX2388[578] A/V decoder core. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx23885: Add correct detection of the HVR-1250 model 79501Andy Walls
The offset in the eeprom data for the 79501 version of the HVR-1250 is at 0xc0 vs. the standard 0x80. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx25840: Make cx25840 i2c register read transactions atomicAndy Walls
There was a small window between writing the cx25840 register address over the i2c bus and reading the register contents back from the cx25840 device that the i2c adapter lock was released. This change ensures the adapter lock is not released until the register read is done. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx23885: i2c_wait_done returns 0 or 1, don't check for < 0 return valueJean Delvare
Function i2c_wait_done() never returns negative values, so there is no point in checking for them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx23885: Check for slave nack on all transactionsJean Delvare
Don't just check for nacks on zero-length transactions. Check on other transactions too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx23885: Return -ENXIO on slave nackJean Delvare
Documentation/i2c/fault-codes says that i2c adapter drivers should return -ENXIO when no slave acks an address byte. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - vc032x: Force main register write at probe time (poxxxx)Jean-François Moine
On laptops, the webcam sometimes disconnects when writing the first main register (b300). This patch prevents the creation of a new /dev/video<n> on streaming start. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - vc032x: Do sensor probe at resume timeJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - vc032x: Add more controls for poxxxxJean-François Moine
The added controls are exposure, gain, autogain and backlight compensation. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - sq930x: Cleanup source, add commentsJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - sq930x: Change the horizontal blanking of sensor mt9v111Jean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - sq930x: Change image format to Bayer modeJean-François Moine
The JPEG format did not work fine. The Bayer format offers correct VGA (640x480) resolution, but bad QQVGA (160x120). This last resolution is removed. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - sq930x: Change the default values of gain and exposureJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - sq930x: Change the gain value for Micron sensorsJean-François Moine
The bit 7 of the sensor gain register multiplies the 7bits value by two. It is now always set with half the user gain value. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - sq930x: Bad init sequence for sensor mt9v111Jean-François Moine
The start_1 exchange must be done by (reg, val) * 5 and not 8. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - main: Version changeJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: gspca - sonixj / sq930x / t613: Remove unused variable in struct sdJean-François Moine
The sensor enum definition was not at the right place. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08xen-blkfront: fix missing out labelJens Axboe
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-09staging: Pushdown bkl to easycap ioctl handlersFrederic Weisbecker
These were amongst the last users of struct file_operations:ioctl Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-08-09Merge remote branch 'gcl/next' into nextBenjamin Herrenschmidt
2010-08-09memblock: Fix memblock_is_region_reserved() to return a booleanBenjamin Herrenschmidt
All callers expect a boolean result which is true if the region overlaps a reserved region. However, the implementation actually returns -1 if there is no overlap, and a region index (0 based) if there is. Make it behave as callers (and common sense) expect. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09powerpc: Trim defconfigsBenjamin Herrenschmidt
This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09Merge commit 'linus/master' into bkl/coreFrederic Weisbecker
Merge reason: The staging tree has introduced the easycap driver lately. We need the latest updates to pushdown the bkl in its ioctl helper.
2010-08-08Squashfs: fix checkpatch.pl warningsPhillip Lougher
Checkpatch.pl in 2.6.34 added a check for spaces between tabs. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-08-09autofs/autofs4: Move compat_ioctl handling into fsArnd Bergmann
Handling of autofs ioctl numbers does not need to be generic and can easily be done directly in autofs itself. This also pushes the BKL into autofs and autofs4 ioctl methods. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ian Kent <raven@themaw.net> Cc: Autofs <autofs@linux.kernel.org> Cc: John Kacur <jkacur@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-08-09v4l: Convert v4l2-dev to unlocked_ioctlArnd Bergmann
v4l2 implements two separate file operations for drivers that use locked and unlocked ioctl callbacks. Since we want to remove the ioctl file operation in favor of the unlocked variant, this separation no longer seems helpful. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: John Kacur <jkacur@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-08-08kmemleak: Fix typo in the commentHolger Hans Peter Freyther
Fix typo in comment. Signed-off-by: Holger Hans Peter Freyther <zecke@selfish.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2010-08-08perf, x86: P4 PMU -- update nmi irq statistics and unmask lvt entry properlyCyrill Gorcunov
In case if last active performance counter is not overflowed at moment of NMI being triggered by another counter, the irq statistics may miss an update stage. As a more serious consequence -- apic quirk may not be triggered so apic lvt entry stay masked. Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100805150917.GA6311@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-08mtd: Remove obsolete <mtd/compatmac.h> includeDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-08mtd: Update copyright noticesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2010-08-08ACPI, APEI, Manage GHES as platform devicesHuang Ying
Register GHES during HEST initialization as platform devices. And make GHES driver into platform device driver. So that the GHES driver module can be loaded automatically when there are GHES available. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-08ACPI, APEI, Rename CPER and GHES severity constantsHuang Ying
The abbreviation of severity should be SEV instead of SER, so the CPER severity constants are renamed accordingly. GHES severity constants are renamed in the same way too. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-08ACPI, APEI, Fix a typo of error path of apei_resources_requestHuang Ying
Fix a typo of error path of apei_resources_request. release_mem_region and release_region should be interchange. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-08watchdog: hpwdt: formatting of pointers in printk()Kulikov Vasiliy
Use %p instead of %08x in printk(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08watchdog: Adding support for ARM Primecell SP805 WatchdogViresh KUMAR
Technical Reference Manual can be found at: http://infocenter.arm.com/help/topic/com.arm.doc.ddi0270b/DDI0270.pdf Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FGGiel van Schijndel
Add a new watchdog driver for the Fintek F71808E and F71882FG Super I/O controllers. Signed-off-by: Giel van Schijndel <me@mortis.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08watchdog: sch311x_wdt.c: set parent before registeriing the misc device in ↵Wim Van Sebroeck
probe() function Set the paranet of the misc_device before we register the misc_device. Reported-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Wim Van sebroeck <wim@iguana.be>
2010-08-08watchdog: wdt_pci.c: move ids to pci_ids.hH Hartley Sweeten
Move the VENDOR/DEVICE ids to pci_ids.h. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08watchdog: s3c2410_wdt - Fix removing of platform deviceWim Van Sebroeck
When removing the watchdog platform device, we need to disable the access to userspace first. It makes no sense to remove the drivers clock, irq's, ... and then disable userspace access. the order of removal has also been changed so that it is the reverse of probing (this way the clock is also disabled sooner). Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: check kmalloc() result arch/tile: catch up on various minor cleanups. arch/tile: avoid erroneous error return for PTRACE_POKEUSR. tile: set ARCH_KMALLOC_MINALIGN tile: remove homegrown L1_CACHE_ALIGN macro arch/tile: Miscellaneous cleanup changes. arch/tile: Split the icache flush code off to a generic <arch> header. arch/tile: Fix bug in support for atomic64_xx() ops. arch/tile: Shrink the tile-opcode files considerably. arch/tile: Add driver to enable access to the user dynamic network. arch/tile: Enable more sophisticated IRQ model for 32-bit chips. Move list types from <linux/list.h> to <linux/types.h>. Add wait4() back to the set of <asm-generic/unistd.h> syscalls. Revert adding some arch-specific signal syscalls to <linux/syscalls.h>. arch/tile: Do not use GFP_KERNEL for dma_alloc_coherent(). Feedback from fujita.tomonori@lab.ntt.co.jp. arch/tile: core support for Tilera 32-bit chips. Fix up the "generic" unistd.h ABI to be more useful.
2010-08-08Merge branch 'for-linus' of git://www.jni.nu/crisLinus Torvalds
* 'for-linus' of git://www.jni.nu/cris: (51 commits) CRIS: Fix alignment problem for older ld CRIS: Always dump registers for segfaulting process. CRIS: Add config for pausing a seg-faulting process CRIS: Don't take faults while in_atomic CRIS: Fixup lookup for delay slot faults CRIS: Discard exit.text and .data at runtime CRIS: Add cache aligned and read mostly data sections CRIS: Return something from profile write CRIS: Add ARTPEC-3 and timestamps for sync-serial CRIS: Better ARTPEC-3 support for gpio CRIS: Add include guard CRIS: Better handling of pinmux settings CRIS: New DMA defines for ARTPEC-3 CRIS: __do_strncpy_from_user: Don't read the byte beyond the nil CRIS: Pagetable for ARTPEC-3 CRIS: Machine dependent memmap.h CRIS: Check if pointer is set before using it CRIS: Machine dependent dma.h CRIS: Define __read_mostly for CRISv32 CRIS: Discard .note.gnu.build-id section ...
2010-08-08Merge branch 'for-linus' of git://android.kernel.org/kernel/tegraLinus Torvalds
* 'for-linus' of git://android.kernel.org/kernel/tegra: [ARM] tegra: add MAINTAINERS entry [ARM] tegra: harmony: Add harmony board file [ARM] tegra: add pinmux support [ARM] tegra: add GPIO support [ARM] tegra: Add timer support [ARM] tegra: SMP support [ARM] tegra: Add clock support [ARM] tegra: Add IRQ support [ARM] tegra: initial tegra support
2010-08-08Merge branch 'for-linus' of git://github.com/schandinat/linux-2.6Linus Torvalds
* 'for-linus' of git://github.com/schandinat/linux-2.6: drivers/video/via/via-gpio.c: fix warning viafb: Depends on X86 fbdev: section cleanup in viafb driver viafb: fix accel_flags check_var bug viafb: probe cleanups viafb: remove ioctls which break the framebuffer interface viafb: update fix before calculating depth viafb: PLL value cleanup viafb: simplify lcd size "detection" viafb: fix PCI table viafb: add lcd scaling support for some IGPs viafb: improve lcd code readability viafb: remove duplicated scaling code MAINTAINERS: update viafb entry
2010-08-08Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (64 commits) OMAP: DSS2: OMAPFB: add support for FBIO_WAITFORVSYNC OMAP: DSS2: Replace strncmp() with sysfs_streq() in overlay_manager_store() OMAP: DSS2: Fix error path in omap_dsi_update() OMAP: DSS2: TDO35S: fix video signaling OMAP: DSS2: OMAPFB: Fix invalid bpp for PAL and NTSC modes OMAP: DSS2: OMAPFB: Fix probe error path OMAP3EVM: Replace vdvi regulator supply with vdds_dsi OMAP: DSS2: Remove extra return statement OMAP: DSS2: adjust YUV overlay width to be even OMAP: DSS2: OMAPFB: Fix sysfs mirror input check OMAP: DSS2: OMAPFB: Remove redundant color register range check OMAP: DSS2: OMAPFB: Remove redundant rotate range check OMAP: DSS2: OMAPFB: Check fb2display() return value OMAP: DSS2: Taal: Optimize enable_te, rotate, mirror when value unchanged OMAP: DSS2: DSI: detect unsupported update requests OMAP: DSS2: DSI: increase FIFO low threshold OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_size OMAP: DSS2: change manual update scaling setup OMAP: DSS2: DSI: use BTA to end the frame transfer ...
generated by cgit (git 2.34.1) at 2025-09-22 00:14:27 +0000