summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-05iio: light: vcnl4000: Don't power on/off chip in configMårten Lindahl
After enabling/disabling interrupts on the vcnl4040 chip the als and/or ps sensor is powered on or off depending on the interrupt enable bits. This is made as a last step in write_event_config. But there is no reason to do this as the runtime PM handles the power state of the sensors. Interfering with this may impact sensor readings. Consider the following: 1. Userspace makes sensor data reading which triggers RPM resume (sensor powered on) and a RPM suspend timeout. The timeout is 2000ms before RPM suspend powers the sensor off if no new reading is made within the timeout period. 2. Userspace disables interrupts => powers sensor off 3. Userspace reads sensor data = 0 because sensor is off and the suspend timeout has not passed. For each new reading made within the timeout period the timeout is renewed with 2000ms and RPM will not make a new resume (device was not suspended). So the sensor will not be powered on. 4. No further userspace reading for 2000ms ends RPM suspend timeout and triggers suspend (powers off already powered off sensor). Powering sensor off in (2) makes all consecutive readings made within 2000ms to the previous reading (3) return invalid data. Skip setting power state when writing new event config. Fixes: 546676121cb9 ("iio: light: vcnl4000: Add interrupt support for vcnl4040") Fixes: bc292aaf9cb4 ("iio: light: vcnl4000: add illuminance irq vcnl4040/4200") Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20230907-vcnl4000-pm-fix-v2-1-298e01f54db4@axis.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: addac: Kconfig: update ad74413r selectionsAntoniu Miclaus
Building ad74413r without selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER generates error with respect to the iio trigger functions that are used within the driver. Update the Kconfig accordingly. Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20230912085421.51102-1-antoniu.miclaus@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: pressure: dps310: Adjust Timeout SettingsLakshmi Yadlapati
The DPS310 sensor chip has been encountering intermittent errors while reading the sensor device across various system designs. This issue causes the chip to become "stuck," preventing the indication of "ready" status for pressure and temperature measurements in the MEAS_CFG register. To address this issue, this commit fixes the timeout settings to improve sensor stability: - After sending a reset command to the chip, the timeout has been extended from 2.5 ms to 15 ms, aligning with the DPS310 specification. - The read timeout value of the MEAS_CFG register has been adjusted from 20ms to 30ms to match the specification. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Fixes: 7b4ab4abcea4 ("iio: pressure: dps310: Reset chip after timeout") Link: https://lore.kernel.org/r/20230829180222.3431926-2-lakshmiy@us.ibm.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: imu: bno055: Fix missing Kconfig dependenciesJonathan Cameron
This driver uses IIO triggered buffers so it needs to select them in Kconfig. on riscv-32bit: /opt/crosstool/gcc-13.2.0-nolibc/riscv32-linux/bin/riscv32-linux-ld: drivers/iio/imu/bno055/bno055.o: in function `.L367': bno055.c:(.text+0x2c96): undefined reference to `devm_iio_triggered_buffer_setup_ext' Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/40566b4b-3950-81fe-ff14-871d8c447627@infradead.org/ Fixes: 4aefe1c2bd0c ("iio: imu: add Bosch Sensortec BNO055 core driver") Cc: Andrea Merello <andrea.merello@iit.it> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230903113052.846298-1-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: imx8qxp: Fix address for command buffer registersPhilipp Rossak
The ADC Command Buffer Register high and low are currently pointing to the wrong address and makes it impossible to perform correct ADC measurements over all channels. According to the datasheet of the imx8qxp the ADC_CMDL register starts at address 0x100 and the ADC_CMDH register starts at address 0x104. This bug seems to be in the kernel since the introduction of this driver. This can be observed by checking all raw voltages of the adc and they are all nearly identical: cat /sys/bus/iio/devices/iio\:device0/in_voltage*_raw 3498 3494 3491 3491 3489 3490 3490 3490 Fixes: 1e23dcaa1a9fa ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230904220204.23841-1-embed3d@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()Tzung-Bi Shih
cros_ec_sensors_push_data() reads `indio_dev->active_scan_mask` and calls iio_push_to_buffers_with_timestamp() without making sure the `indio_dev` stays in buffer mode. There is a race if `indio_dev` exits buffer mode right before cros_ec_sensors_push_data() accesses them. An use-after-free on `indio_dev->active_scan_mask` was observed. The call trace: [...] _find_next_bit cros_ec_sensors_push_data cros_ec_sensorhub_event blocking_notifier_call_chain cros_ec_irq_thread It was caused by a race condition: one thread just freed `active_scan_mask` at [1]; while another thread tried to access the memory at [2]. Fix it by calling iio_device_claim_buffer_mode() to ensure the `indio_dev` can't exit buffer mode during cros_ec_sensors_push_data(). [1]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/industrialio-buffer.c#L1189 [2]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c#L198 Cc: stable@vger.kernel.org Fixes: aa984f1ba4a4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO") Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230829030622.1571852-1-tzungbi@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handlerGONG, Ruiqi
When compiling with gcc 13 with -Warray-bounds enabled: In file included from drivers/iio/proximity/irsd200.c:15: In function ‘iio_push_to_buffers_with_timestamp’, inlined from ‘irsd200_trigger_handler’ at drivers/iio/proximity/irsd200.c:770:2: ./include/linux/iio/buffer.h:42:46: error: array subscript ‘int64_t {aka long long int}[0]’ is partly outside array bounds of ‘s16[1]’ {aka ‘short int[1]’} [-Werror=array-bounds=] 42 | ((int64_t *)data)[ts_offset] = timestamp; | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ drivers/iio/proximity/irsd200.c: In function ‘irsd200_trigger_handler’: drivers/iio/proximity/irsd200.c:763:13: note: object ‘buf’ of size 2 763 | s16 buf = 0; | ^~~ The problem seems to be that irsd200_trigger_handler() is taking a s16 variable as an int64_t buffer. As Jonathan suggested [1], fix it by extending the buffer to a two-element array of s64. Link: https://github.com/KSPP/linux/issues/331 Link: https://lore.kernel.org/lkml/20230809181329.46c00a5d@jic23-huawei/ [1] Fixes: 3db3562bc66e ("iio: Add driver for Murata IRS-D200") Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com> Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Waqar Hameed <waqar.hameed@axis.com> Tested-by: Waqar Hameed <waqar.hameed@axis.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230810035910.1334706-1-gongruiqi@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05dt-bindings: iio: rohm,bu27010: add missing vdd-supply to exampleKrzysztof Kozlowski
Bindings require vdd-supply but the example DTS was missing one. This fixes dt_binding_check error: Documentation/devicetree/bindings/iio/light/rohm,bu27010.example.dtb: light-sensor@38: 'vdd-supply' is a required property Fixes: ce2a8c160066 ("dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/20230808063223.80431-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05RDMA/core: Require admin capabilities to set system parametersLeon Romanovsky
Like any other set command, require admin permissions to do it. Cc: stable@vger.kernel.org Fixes: 2b34c5580226 ("RDMA/core: Add command to set ib_core device net namspace sharing mode") Link: https://lore.kernel.org/r/75d329fdd7381b52cbdf87910bef16c9965abb1f.1696443438.git.leon@kernel.org Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-10-05Merge branch 'mptcp-fixes-and-maintainer-email-update-for-v6-6'Jakub Kicinski
Mat Martineau says: ==================== mptcp: Fixes and maintainer email update for v6.6 Patch 1 addresses a race condition in MPTCP "delegated actions" infrastructure. Affects v5.19 and later. Patch 2 removes an unnecessary restriction that did not allow additional outgoing subflows using the local address of the initial MPTCP subflow. v5.16 and later. Patch 3 updates Matthieu's email address. ==================== Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-0-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05MAINTAINERS: update Matthieu's email addressMatthieu Baerts
Use my kernel.org account instead. The other one will bounce by the end of the year. Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-3-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05mptcp: userspace pm allow creating id 0 subflowGeliang Tang
This patch drops id 0 limitation in mptcp_nl_cmd_sf_create() to allow creating additional subflows with the local addr ID 0. There is no reason not to allow additional subflows from this local address: we should be able to create new subflows from the initial endpoint. This limitation was breaking fullmesh support from userspace. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/391 Cc: stable@vger.kernel.org Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-2-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05mptcp: fix delegated action racesPaolo Abeni
The delegated action infrastructure is prone to the following race: different CPUs can try to schedule different delegated actions on the same subflow at the same time. Each of them will check different bits via mptcp_subflow_delegate(), and will try to schedule the action on the related per-cpu napi instance. Depending on the timing, both can observe an empty delegated list node, causing the same entry to be added simultaneously on two different lists. The root cause is that the delegated actions infra does not provide a single synchronization point. Address the issue reserving an additional bit to mark the subflow as scheduled for delegation. Acquiring such bit guarantee the caller to own the delegated list node, and being able to safely schedule the subflow. Clear such bit only when the subflow scheduling is completed, ensuring proper barrier in place. Additionally swap the meaning of the delegated_action bitmask, to allow the usage of the existing helper to set multiple bit at once. Fixes: bcd97734318d ("mptcp: use delegate action to schedule 3rd ack retrans") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-1-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: stmmac: remove unneeded stmmac_poll_controllerRemi Pommarel
Using netconsole netpoll_poll_dev could be called from interrupt context, thus using disable_irq() would cause the following kernel warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/irq/manage.c:137 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0 CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117 Hardware name: aml (r1) (DT) Call trace: dump_backtrace+0x0/0x270 show_stack+0x14/0x20 dump_stack_lvl+0x8c/0xac dump_stack+0x18/0x30 ___might_sleep+0x150/0x194 __might_sleep+0x64/0xbc synchronize_irq+0x8c/0x150 disable_irq+0x2c/0x40 stmmac_poll_controller+0x140/0x1a0 netpoll_poll_dev+0x6c/0x220 netpoll_send_skb+0x308/0x390 netpoll_send_udp+0x418/0x760 write_msg+0x118/0x140 [netconsole] console_unlock+0x404/0x500 vprintk_emit+0x118/0x250 dev_vprintk_emit+0x19c/0x1cc dev_printk_emit+0x90/0xa8 __dev_printk+0x78/0x9c _dev_warn+0xa4/0xbc ath10k_warn+0xe8/0xf0 [ath10k_core] ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core] ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci] __napi_poll+0x58/0x1f4 net_rx_action+0x504/0x590 _stext+0x1b8/0x418 run_ksoftirqd+0x74/0xa4 smpboot_thread_fn+0x210/0x3c0 kthread+0x1fc/0x210 ret_from_fork+0x10/0x20 Since [0] .ndo_poll_controller is only needed if driver doesn't or partially use NAPI. Because stmmac does so, stmmac_poll_controller can be removed fixing the above warning. [0] commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Cc: <stable@vger.kernel.org> # 5.15.x Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1c156a6d8c9170bd6a17825f2277115525b4d50f.1696429960.git.repk@triplefau.lt Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: lan743x: also select PHYLIBRandy Dunlap
Since FIXED_PHY depends on PHYLIB, PHYLIB needs to be set to avoid a kconfig warning: WARNING: unmet direct dependencies detected for FIXED_PHY Depends on [n]: NETDEVICES [=y] && PHYLIB [=n] Selected by [y]: - LAN743X [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=y] Fixes: 73c4d1b307ae ("net: lan743x: select FIXED_PHY") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202309261802.JPbRHwti-lkp@intel.com Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: UNGLinuxDriver@microchip.com Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://lore.kernel.org/r/20231002193544.14529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLEJisheng Zhang
Drew found "CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail" the log looks like: mmc0: Unable to allocate ADMA buffers - falling back to standard DMA The logic is: generic riscv defconfig selects ARCH_RENESAS then ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all non-dma-coherent riscv platforms have a dma global pool, this assumption seems not correct. And I believe DMA_GLOBAL_POOL should not be selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific conditions can select it globaly, for example NOMMU ARM and so on, because it's designed for special cases such as "nommu cases where non-cacheable memory lives in a fixed place in the physical address map" as pointed out by Robin. Fix the issue by making ARCH_R9A07G043 (riscv version) depend on NONPORTABLE, thus generic defconfig won't select ARCH_R9A07G043 by default. And even for random config case, there will be less debug effort once we see NONPORTABLE is enabled. Reported-by: Drew Fustini <dfustini@baylibre.com> Closes: https://lore.kernel.org/linux-riscv/ZRuamJuShOnvP1pr@x1/ Fixes: 484861e09f3e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20231004150856.2540-1-jszhang@kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05net: ethernet: mediatek: disable irq before schedule napiChristian Marangi
While searching for possible refactor of napi_schedule_prep and __napi_schedule it was notice that the mtk eth driver disable the interrupt for rx and tx AFTER napi is scheduled. While this is a very hard to repro case it might happen to have situation where the interrupt is disabled and never enabled again as the napi completes and the interrupt is enabled before. This is caused by the fact that a napi driven by interrupt expect a logic with: 1. interrupt received. napi prepared -> interrupt disabled -> napi scheduled 2. napi triggered. ring cleared -> interrupt enabled -> wait for new interrupt To prevent this case, disable the interrupt BEFORE the napi is scheduled. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20231002140805.568-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05HID: Add quirk to ignore the touchscreen battery on HP ENVY 15-eu0556ngFabian Vogt
Like various other devices using similar hardware, this model reports a perpetually empty battery (0-1%). Join the others and apply HID_BATTERY_QUIRK_IGNORE. Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bitSrinivas Pandruvada
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe(). Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB") Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/ Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: sony: remove duplicate NULL check before calling usb_free_urb()Jiri Kosina
usb_free_urb() does the NULL check itself, so there is no need to duplicate it prior to calling. Reported-by: kernel test robot <lkp@intel.com> Fixes: e1cd4004cde7c9 ("HID: sony: Fix a potential memory leak in sony_probe()") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nintendo: reinitialize USB Pro Controller after resuming from suspendMartino Fontana
When suspending the computer, a Switch Pro Controller connected via USB will lose its internal status. However, because the USB connection was technically never lost, when resuming the computer, the driver will attempt to communicate with the controller as if nothing happened (and fail). Because of this, the user was forced to manually disconnect the controller (or to press the sync button on the controller to power it off), so that it can be re-initialized. With this patch, the controller will be automatically re-initialized after resuming from suspend. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216233 Signed-off-by: Martino Fontana <tinozzo123@gmail.com> Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nvidia-shield: Fix some missing function calls() in the probe error ↵Christophe JAILLET
handling path The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing calls. Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nvidia-shield: Fix a missing led_classdev_unregister() in the probe ↵Christophe JAILLET
error handling path The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing call. Make sure it is safe to call in the probe error handling path by preventing the led_classdev from attempting to set the LED brightness to the off state on unregister. Fixes: f88af60e74a5 ("HID: nvidia-shield: Support LED functionality for Thunderstrike") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: multitouch: Add required quirk for Synaptics 0xcd7e deviceRahul Rameshbabu
Register the Synaptics device as a special multitouch device with certain quirks that may improve usability of the touchpad device. Reported-by: Rain <rain@sunshowers.io> Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/ Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05binder: fix memory leaks of spam and pending workCarlos Llamas
A transaction complete work is allocated and queued for each transaction. Under certain conditions the work->type might be marked as BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT to notify userspace about potential spamming threads or as BINDER_WORK_TRANSACTION_PENDING when the target is currently frozen. However, these work types are not being handled in binder_release_work() so they will leak during a cleanup. This was reported by syzkaller with the following kmemleak dump: BUG: memory leak unreferenced object 0xffff88810e2d6de0 (size 32): comm "syz-executor338", pid 5046, jiffies 4294968230 (age 13.590s) hex dump (first 32 bytes): e0 6d 2d 0e 81 88 ff ff e0 6d 2d 0e 81 88 ff ff .m-......m-..... 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81573b75>] kmalloc_trace+0x25/0x90 mm/slab_common.c:1114 [<ffffffff83d41873>] kmalloc include/linux/slab.h:599 [inline] [<ffffffff83d41873>] kzalloc include/linux/slab.h:720 [inline] [<ffffffff83d41873>] binder_transaction+0x573/0x4050 drivers/android/binder.c:3152 [<ffffffff83d45a05>] binder_thread_write+0x6b5/0x1860 drivers/android/binder.c:4010 [<ffffffff83d486dc>] binder_ioctl_write_read drivers/android/binder.c:5066 [inline] [<ffffffff83d486dc>] binder_ioctl+0x1b2c/0x3cf0 drivers/android/binder.c:5352 [<ffffffff816b25f2>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff816b25f2>] __do_sys_ioctl fs/ioctl.c:871 [inline] [<ffffffff816b25f2>] __se_sys_ioctl fs/ioctl.c:857 [inline] [<ffffffff816b25f2>] __x64_sys_ioctl+0xf2/0x140 fs/ioctl.c:857 [<ffffffff84b30008>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84b30008>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the leaks by kfreeing these work types in binder_release_work() and handle them as a BINDER_WORK_TRANSACTION_COMPLETE cleanup. Cc: stable@vger.kernel.org Fixes: 0567461a7a6e ("binder: return pending info for frozen async txns") Fixes: a7dc1e6f99df ("binder: tell userspace to dump current backtrace when detected oneway spamming") Reported-by: syzbot+7f10c1653e35933c0f1e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7f10c1653e35933c0f1e Suggested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230922175138.230331-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05Merge branch 'net-mana-fix-some-tx-processing-bugs'Paolo Abeni
Haiyang Zhang says: ==================== net: mana: Fix some TX processing bugs Fix TX processing bugs on error handling, tso_bytes calculation, and sge0 size. ==================== Link: https://lore.kernel.org/r/1696020147-14989-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix oversized sge0 for GSO packetsHaiyang Zhang
Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix the tso_bytes calculationHaiyang Zhang
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove the subtraction from header size. Cc: stable@vger.kernel.org Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix TX CQE error handlingHaiyang Zhang
For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging. Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05media: mediatek: vcodec: Fix encoder access NULL pointerIrui Wang
Need to set the private data with encoder device, or will access NULL pointer in encoder handler. Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder") Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-05firmware_loader: Update contact emails for ABI docsRuss Weight
Update the firmware_loader documentation and corresponding section in the MAINTAINERs file with a new email address. Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20230929151326.311959-1-russell.h.weight@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05Documentation: embargoed-hardware-issues.rst: Clarify prenotifactionKees Cook
There has been a repeated misunderstanding about what the hardware embargo list is for. Clarify the language in the process so that it is clear that only fixes are coordinated. There is explicitly no prenotification process. The list members are also expected to keep total radio silence during embargoes. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: workflows@vger.kernel.org Cc: linux-doc@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231004004959.work.258-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05dma-buf: add dma_fence_timestamp helperChristian König
When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
2023-10-05mcb: remove is_added flag from mcb_device structJorge Sanjuan Garcia
When calling mcb_bus_add_devices(), both mcb devices and the mcb bus will attempt to attach a device to a driver because they share the same bus_type. This causes an issue when trying to cast the container of the device to mcb_device struct using to_mcb_device(), leading to a wrong cast when the mcb_bus is added. A crash occurs when freing the ida resources as the bus numbering of mcb_bus gets confused with the is_added flag on the mcb_device struct. The only reason for this cast was to keep an is_added flag on the mcb_device struct that does not seem necessary. The function device_attach() handles already bound devices and the mcb subsystem does nothing special with this is_added flag so remove it completely. Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable <stable@kernel.org> Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()Bartosz Golaszewski
pinctrl_gpio_set_config() expects the GPIO number from the global GPIO numberspace, not the controller-relative offset, which needs to be added to the chip base. Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2023-10-04ksmbd: fix race condition between tree conn lookup and disconnectNamjae Jeon
if thread A in smb2_write is using work-tcon, other thread B use smb2_tree_disconnect free the tcon, then thread A will use free'd tcon. Time + Thread A | Thread A smb2_write | smb2_tree_disconnect | | | kfree(tree_conn) | // UAF! | work->tcon->share_conf | + This patch add state, reference count and lock for tree conn to fix race condition issue. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04drm/amd/display: apply edge-case DISPCLK WDIVIDER changes to master OTG ↵Samson Tam
pipes only [Why] The edge-case DISPCLK WDIVIDER changes call stream_enc functions. But with MPC pipes, downstream pipes have null stream_enc and will cause crash. [How] Only call stream_enc functions for pipes that are OTG master. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd: Fix detection of _PR3 on the PCIe root portMario Limonciello
On some systems with Navi3x dGPU will attempt to use BACO for runtime PM but fails to resume properly. This is because on these systems the root port goes into D3cold which is incompatible with BACO. This happens because in this case dGPU is connected to a bridge between root port which causes BOCO detection logic to fail. Fix the intent of the logic by looking at root port, not the immediate upstream bridge for _PR3. Cc: stable@vger.kernel.org Suggested-by: Jun Ma <Jun.Ma2@amd.com> Tested-by: David Perry <David.Perry@amd.com> Fixes: b10c1c5b3a4e ("drm/amdgpu: add check for ACPI power resources") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd: Fix logic error in sienna_cichlid_update_pcie_parameters()Mario Limonciello
While aligning SMU11 with SMU13 implementation an assumption was made that `dpm_context->dpm_tables.pcie_table` was populated in dpm table initialization like in SMU13 but it isn't. So restore some of the original logic and instead just check for amdgpu_device_pcie_dynamic_switching_supported() to decide whether to hardcode values; erring on the side of performance. Cc: stable@vger.kernel.org # 6.1+ Reported-and-tested-by: Umio Yasuno <coelacanth_dream@protonmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1447#note_2101382 Fixes: e701156ccc6c ("drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amdgpu: Fix a memory leakLuben Tuikov
Fix a memory leak in amdgpu_fru_get_product_info(). Cc: Alex Deucher <Alexander.Deucher@amd.com> Reported-by: Yang Wang <kevinyang.wang@amd.com> Fixes: 0dbf2c562625 ("drm/amdgpu: Interpret IPMI data for product information (v2)") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd/pm: add unique_id for gc 11.0.3Kenneth Feng
add unique_id for gc 11.0.3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04ksmbd: fix race condition from parallel smb2 lock requestsNamjae Jeon
There is a race condition issue between parallel smb2 lock request. Time + Thread A | Thread A smb2_lock | smb2_lock | insert smb_lock to lock_list | spin_unlock(&work->conn->llist_lock) | | | spin_lock(&conn->llist_lock); | kfree(cmp_lock); | // UAF! | list_add(&smb_lock->llist, &rollback_list) + This patch swaps the line for adding the smb lock to the rollback list and adding the lock list of connection to fix the race issue. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix race condition from parallel smb2 logoff requestsNamjae Jeon
If parallel smb2 logoff requests come in before closing door, running request count becomes more than 1 even though connection status is set to KSMBD_SESS_NEED_RECONNECT. It can't get condition true, and sleep forever. This patch fix race condition problem by returning error if connection status was already set to KSMBD_SESS_NEED_RECONNECT. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix uaf in smb20_oplock_break_ackluosili
drop reference after use opinfo. Signed-off-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix race condition with fpNamjae Jeon
fp can used in each command. If smb2_close command is coming at the same time, UAF issue can happen by race condition. Time + Thread A | Thread B1 B2 .... B5 smb2_open | smb2_close | __open_id | insert fp to file_table | | | atomic_dec_and_test(&fp->refcount) | if fp->refcount == 0, free fp by kfree. // UAF! | use fp | + This patch add f_state not to use freed fp is used and not to free fp in use. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix race condition between session lookup and expireNamjae Jeon
Thread A + Thread B ksmbd_session_lookup | smb2_sess_setup sess = xa_load | | | xa_erase(&conn->sessions, sess->id); | | ksmbd_session_destroy(sess) --> kfree(sess) | // UAF! | sess->last_active = jiffies | + This patch add rwsem to fix race condition between ksmbd_session_lookup and ksmbd_expire_session. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04Merge tag 'rtla-v6.6-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux Pull rtla fixes from Daniel Bristot de Oliveira: "rtla (Real-Time Linux Analysis) tool fixes. Timerlat auto-analysis: - Timerlat is reporting thread interference time without thread noise events occurrence. It was caused because the thread interference variable was not reset after the analysis of a timerlat activation that did not hit the threshold. - The IRQ handler delay is estimated from the delta of the IRQ latency reported by timerlat, and the timestamp from IRQ handler start event. If the delta is near-zero, the drift from the external clock and the trace event and/or the overhead can cause the value to be negative. If the value is negative, print a zero-delay. - IRQ handlers happening after the timerlat thread event but before the stop tracing were being reported as IRQ that happened before the *current* IRQ occurrence. Ignore Previous IRQ noise in this condition because they are valid only for the *next* timerlat activation. Timerlat user-space: - Timerlat is stopping all user-space thread if a CPU becomes offline. Do not stop the entire tool if a CPU is/become offline, but only the thread of the unavailable CPU. Stop the tool only, if all threads leave because the CPUs become/are offline. man-pages: - Fix command line example in timerlat hist man page" * tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux: rtla: fix a example in rtla-timerlat-hist.rst rtla/timerlat: Do not stop user-space if a cpu is offline rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample rtla/timerlat_aa: Fix negative IRQ delay rtla/timerlat_aa: Zero thread sum after every sample analysis
2023-10-04netlink: annotate data-races around sk->sk_errEric Dumazet
syzbot caught another data-race in netlink when setting sk->sk_err. Annotate all of them for good measure. BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg write to 0xffff8881613bb220 of 4 bytes by task 28147 on cpu 0: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881613bb220 of 4 bytes by task 28146 on cpu 1: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0x00000016 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28146 Comm: syz-executor.0 Not tainted 6.6.0-rc3-syzkaller-00055-g9ed22ae6be81 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231003183455.3410550-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update hb timer immediately after users change hb_intervalXin Long
Currently, when hb_interval is changed by users, it won't take effect until the next expiry of hb timer. As the default value is 30s, users have to wait up to 30s to wait its hb_interval update to work. This becomes pretty bad in containers where a much smaller value is usually set on hb_interval. This patch improves it by resetting the hb timer immediately once the value of hb_interval is updated by users. Note that we don't address the already existing 'problem' when sending a heartbeat 'on demand' if one hb has just been sent(from the timer) mentioned in: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.html Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update transport state when processing a dupcook packetXin Long
During the 4-way handshake, the transport's state is set to ACTIVE in sctp_process_init() when processing INIT_ACK chunk on client or COOKIE_ECHO chunk on server. In the collision scenario below: 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state, sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it creates a new association and sets its transport to ACTIVE then updates to the old association in sctp_assoc_update(). However, in sctp_assoc_update(), it will skip the transport update if it finds a transport with the same ipaddr already existing in the old asoc, and this causes the old asoc's transport state not to move to ACTIVE after the handshake. This means if DATA retransmission happens at this moment, it won't be able to enter PF state because of the check 'transport->state == SCTP_ACTIVE' in sctp_do_8_2_transport_strike(). This patch fixes it by updating the transport in sctp_assoc_update() with sctp_assoc_add_peer() where it updates the transport state if there is already a transport with the same ipaddr exists in the old asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/fd17356abe49713ded425250cc1ae51e9f5846c6.1696172325.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 01:18:13 +0000