summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-17ARM: dts: Add aliases for i.MX27 SPI controllerAlexander Shiyan
Add aliases to determine the proper SPI bus number. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: add Ka-Ro tx53 devicetreeSteffen Trumtrar
This adds support for the Ka-Ro TX53 System-On-Module. As a baseboard is needed to operate it, only a *.dtsi and no Makefile entry. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add uart2 pinctrlSteffen Trumtrar
Add a group to the uart2 pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add uart1 pinctrlSteffen Trumtrar
Add a group to the uart1 pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add pwm2 pinctrlSteffen Trumtrar
Add pinctrl for pwm2. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add ecspi pinctrlSteffen Trumtrar
Add a group to the ecspi pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add csi pinctrlSteffen Trumtrar
Add a group to the csi pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX53: add audmux pinctrlSteffen Trumtrar
Add a group to the audmux pinctrl. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add support for DENX M53EVKMarek Vasut
This patch adds support for the DENX M53EVK board. The board currently supports NAND, Ethernet, UART, CAN, I2C. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: move imx53-qsb audio codec clk lookup into DTShawn Guo
With device tree clk lookup support in place, we can move audio codec clk lookup for ssi_ext1 into device tree now, so that imx53_qsb_init() can be saved. Since ssi_ext2 lookup is used nowhere, it gets removed together with ssi_ext1 lookup from clk driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add PWM1 pinctrl dataMarek Vasut
This patch adds pinctrl data for PWM1 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add LCD IPU pinctrl dataMarek Vasut
This patch adds pinmux for IPU LCD 1 and IPU LVDS. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add NAND pinctrl dataMarek Vasut
This patch adds pinctrl data for NAND on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add I2C2 pinctrl dataMarek Vasut
This patch adds pinctrl data for different mux of I2C2 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add I2C1 pinctrl dataMarek Vasut
This patch adds pinctrl data for different mux of I2C1 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add CAN1 pinctrl dataMarek Vasut
This patch adds pinctrl data for different mux of CAN1 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: mx5: Add AUDMUX4 pinctrl dataMarek Vasut
This patch adds pinctrl data for the AUDMUX4 on MX53. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: dts: add i2c aliasesPhilipp Zabel
This allows to order the i2c character devices correctly, so that /dev/i2c-0 corresponds to i2c1, /dev/i2c-1 corresponds to i2c2, and so on. Currently they are ordered by register address. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx27: Add PWM0 to device treeGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: imx53-qsb.dts: enable usbotg and usbh1Michael Grzeschik
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: use usb-nop-xceiv usbphy entries for imx5xMichael Grzeschik
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: add imx5x usb clock DT lookupsMichael Grzeschik
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx: add imx5x usbmisc entriesMichael Grzeschik
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17Merge tag 'imx-soc-3.11' into imx/dtShawn Guo
imx soc changes for 3.11: * New SoCs i.MX6 Sololite and Vybrid VF610 support * imx5 and imx6 clock fixes and additions * Update clock driver to use of_clk_init() function * Refactor restart routine mxc_restart() to get it work for DT boot as well * Clean up mxc specific ulpi access ops * imx defconfig updates
2013-06-17ARM: imx_v6_v7_defconfig: Enable Vybrid VF610Fabio Estevam
Let VF610 SoC support be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by defaultNicolin Chen
Enable imx-wm8962 and PM_RUNTIME, essential for WM8962 CODEC driver. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresdNicolin Chen
WM8962 needs 24MHz clock for its MCLK, so choose PLL4 as the parent of clko1. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx_v6_v7_defconfig: Enable PWM and backlight optionsFabio Estevam
These options are useful for controlling backlight contrast via PWM. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: Remove mxc specific ulpi access opsMarkus Pargmann
There are ulpi access ops implemented in drivers/usb/phy/phy-ulpi.c. mxc access ops implement the same access operations within mach-imx. This patch removes the mxc ulpi file and uses phy-ulpi instead for imx_otg_ulpi_create. phy-ulpi successfully tested with i.MX27 Phytec phyCARD-S (pca100). Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: add initial support for VF610Jingchang Lu
Add initial support for Freescale Vybrid VF610 SoC. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: add VF610 clock supportJingchang Lu
Add clock support for Vybrid VF610. It uses dtc macro support to define all clock IDs in vf610-clock.h to keep clock IDs coherence between kernel and DT. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx_v6_v7_defconfig: enable parallel displayRogerio Pimentel
Enable paralell display by default Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: clk: No need to initialize phandle structFabio Estevam
commit 84344b43c (ARM: i.MX5: Allow DT clock providers) introduce the following sparse warning: arch/arm/mach-imx/clk.c:12:43: warning: Using plain integer as NULL pointer There is no need to initialize phandle, so remove it. Cc: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: irq-common: Include header to avoid sparse warningFabio Estevam
Fix the following sparse warning: arch/arm/mach-imx/irq-common.c:24:5: warning: symbol 'mxc_set_irq_fiq' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: Enable mx6 solo-lite supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx6: use common of_clk_init() call to initialize clocksShawn Guo
Instead of explicitly calling clock initialization functions, we can declare the functions with CLK_OF_DECLARE() and then call common of_clk_init() to have them invoked properly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx6q: call of_clk_init() to register fixed rate clocksShawn Guo
As the fixed rate clocks are defined in device tree, we can just call of_clk_init() to register them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVEFabio Estevam
Let the mx53 TVE driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX6: clk: add different DualLite MLB clock configDirk Behme
The CCM_CBCMR register (address 0x02C4018) has different meaning between the i.MX6 Quad/Dual and the i.MX6 Solo/DualLite. Compared to the i.MX6 Quad/Dual, the CCM_CBCMR register in the i.MX6 Solo/DualLite reuses the gpu2d_core bits for the MLB clock configuration. Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX5: Add S/PDIF clocksPhilipp Zabel
This patch adds the S/PDIF clocks for i.MX51 and i.MX53. Tested on i.MX53. The i.MX51 has a second set of spdif_root clock dividers, and on i.MX53 there is an additional input to the spdif_xtal mux. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM i.MX53: Add SATA clockSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx6q: clk: add the eim_slow clockHuang Shijie
Add the eim_slow clock, since the weim needs it. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: remove MLB PLL from pllv3Jiada Wang
MLB PLL should be handled internally in MLB driver, so remove it from pllv3. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> CC: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: disable pll8_mlb in mx6q_clksJiada Wang
The MLB PLL clock's operation doesn't fit for clock framework and it should be handled internally in MLB driver. Remove initialization of pll8_mlb clock device but leave its declaration in mx6q_clks to avoid affecting imx6q clock numbering. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> CC: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: add initial support for imx6slShawn Guo
Add initial support for i.MX6 SoloLite. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: enable low-level debug support for imx6slShawn Guo
Enable low-level debug support for i.MX6 SoloLite by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: add clock support for imx6slShawn Guo
Add clock support for i.MX6 SoloLite. It uses the dtc marco support to define all clock IDs in imx6sl-clock.h, which will be included by both clock driver and device tree sources, so that the data will stay sync all the time between kernel and DT. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: create mxc_arch_reset_init_dt() for DT bootShawn Guo
The mxc_arch_reset_init() uses static mapping and calls clk_get_sys() to get clock. It's suitable for non-DT boot but not for DT boot where dynamic mapping and of_clk_get() should be used instead. Create mxc_arch_reset_init_dt() as the DT variant of mxc_arch_reset_init(), and change DT platforms to use it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: move clk_prepare() out from mxc_restart()Shawn Guo
It's inappropriate to call clk_prepare() in mxc_restart(), because the restart routine could be called in atomic context. Move clk_get() and clk_prepare() into mxc_arch_reset_init() and only have the atomic part clk_enable() be called in mxc_restart(). As a result, mxc_arch_reset_init() needs to be called after clk gets initialized. While there, it also changes printk(KERN_ERR ...) to pr_err() and adds __init annotation for mxc_arch_reset_init(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: include <asm/io.h> in hardware.hShawn Guo
As IOMEM is referenced in hardware.h, <asm/io.h> should be included there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-11 12:04:40 +0000