summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-15tools: fix annoying "mkdir -p ..." logs when building tools in parallelMasahiro Yamada
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds show awkward "mkdir -p ..." logs. $ make -j16 [ snip ] mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids Defining MAKEFLAGS=<value> on the command line wipes out command line switches from the resultant MAKEFLAGS definition, even though the command line switches are active. [1] MAKEFLAGS puts all single-letter options into the first word, and that word will be empty if no single-letter options were given. [2] However, this breaks if MAKEFLAGS=<value> is given on the command line. The tools/ and tools/% targets set MAKEFLAGS=<value> on the command line, which breaks the following code in tools/scripts/Makefile.include: short-opts := $(firstword -$(MAKEFLAGS)) If MAKEFLAGS really needs modification, it should be done through the environment variable, as follows: MAKEFLAGS=<value> $(MAKE) ... That said, I question whether modifying MAKEFLAGS is necessary here. The only flag we might want to exclude is --no-print-directory, as the tools build system changes the working directory. However, people might find the "Entering/Leaving directory" logs annoying. I simply removed the offending MAKEFLAGS=<value>. [1]: https://savannah.gnu.org/bugs/?62469 [2]: https://www.gnu.org/software/make/manual/make.html#Testing-Flags Fixes: ea01fa9f63ae ("tools: Connect to the kernel build system") Fixes: a50e43332756 ("perf tools: Honor parallel jobs") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Daniel Xu <dxu@dxuuu.xyz>
2025-02-15ALSA: hda/cirrus: Reduce codec resume timeVitaly Rodionov
This patch reduces the resume time by half and introduces an option to include a delay after a single write operation before continuing. Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://patch.msgid.link/20250214162354.2675652-2-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-02-15ALSA: hda/cirrus: Correct the full scale volume set logicVitaly Rodionov
This patch corrects the full-scale volume setting logic. On certain platforms, the full-scale volume bit is required. The current logic mistakenly sets this bit and incorrectly clears reserved bit 0, causing the headphone output to be muted. Fixes: 342b6b610ae2 ("ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants") Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://patch.msgid.link/20250214210736.30814-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-02-14Merge tag 'alpha-fixes-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha fixes from Matt Turner: "A few changes for alpha, including some important fixes for kernel stack alignment" * tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: Use str_yes_no() helper in pci_dac_dma_supported() alpha: Replace one-element array with flexible array member alpha: align stack for page fault and user unaligned trap handlers alpha: make stack 16-byte aligned (most cases) alpha: replace hardcoded stack offsets with autogenerated ones
2025-02-14geneve: Fix use-after-free in geneve_find_dev().Kuniyuki Iwashima
syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac #24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x48/0x68 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x140/0x420 mm/slub.c:4761 kvfree+0x4c/0x68 mm/util.c:688 netdev_release+0x94/0xc8 net/core/net-sysfs.c:2065 device_release+0x98/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x2b0/0x438 lib/kobject.c:737 netdev_run_todo+0xe5c/0xfc8 net/core/dev.c:11185 rtnl_unlock+0x20/0x38 net/core/rtnetlink.c:151 cleanup_net+0x4fc/0x8c0 net/core/net_namespace.c:648 process_one_work+0x700/0x1398 kernel/workqueue.c:3236 process_scheduled_works kernel/workqueue.c:3317 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3398 kthread+0x4bc/0x608 kernel/kthread.c:464 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 The buggy address belongs to the object at ffff000054d6e000 which belongs to the cache kmalloc-cg-4k of size 4096 The buggy address is located 3620 bytes inside of freed 4096-byte region [ffff000054d6e000, ffff000054d6f000) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94d68 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff000016276181 flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff) page_type: f5(slab) raw: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 head: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000003 fffffdffc1535a01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff000054d6ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ed80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff000054d6ee00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff000054d6ee80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ef00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250213043354.91368-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-14vsock/virtio: fix variables initialization during resumingJunnan Wu
When executing suspend to ram twice in a row, the `rx_buf_nr` and `rx_buf_max_nr` increase to three times vq->num_free. Then after virtqueue_get_buf and `rx_buf_nr` decreased in function virtio_transport_rx_work, the condition to fill rx buffer (rx_buf_nr < rx_buf_max_nr / 2) will never be met. It is because that `rx_buf_nr` and `rx_buf_max_nr` are initialized only in virtio_vsock_probe(), but they should be reset whenever virtqueues are recreated, like after a suspend/resume. Move the `rx_buf_nr` and `rx_buf_max_nr` initialization in virtio_vsock_vqs_init(), so we are sure that they are properly initialized, every time we initialize the virtqueues, either when we load the driver or after a suspend/resume. To prevent erroneous atomic load operations on the `queued_replies` in the virtio_transport_send_pkt_work() function which may disrupt the scheduling of vsock->rx_work when transmitting reply-required socket packets, this atomic variable must undergo synchronized initialization alongside the preceding two variables after a suspend/resume. Fixes: bd50c5dc182b ("vsock/virtio: add support for device suspend/resume") Link: https://lore.kernel.org/virtualization/20250207052033.2222629-1-junnan01.wu@samsung.com/ Co-developed-by: Ying Gao <ying01.gao@samsung.com> Signed-off-by: Ying Gao <ying01.gao@samsung.com> Signed-off-by: Junnan Wu <junnan01.wu@samsung.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250214012200.1883896-1-junnan01.wu@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-14Merge tag 'pci-v6.14-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Update a BUILD_BUG_ON() usage that works on current compilers, but breaks compilation on gcc 5.3.1 (Alex Williamson) - Avoid use of FLR for Mediatek MT7922 WiFi; the device previously worked after a long timeout and fallback to SBR, but after a recent RRS change it doesn't work at all after FLR (Bjorn Helgaas) * tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Avoid FLR for Mediatek MT7922 WiFi PCI: Fix BUILD_BUG_ON usage for old gcc
2025-02-14Merge tag 'kvm-x86-fixes-6.14-rcN' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM fixes for 6.14 part 1 - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference. - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1. - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath.
2025-02-14x86/sev: Fix broken SNP support with KVM module built-inAshish Kalra
Fix issues with enabling SNP host support and effectively SNP support which is broken with respect to the KVM module being built-in. SNP host support is enabled in snp_rmptable_init() which is invoked as device_initcall(). SNP check on IOMMU is done during IOMMU PCI init (IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is currently invoked via device_initcall() and cannot be invoked via subsys_initcall() as core IOMMU subsystem gets initialized via subsys_initcall(). Now, if kvm_amd module is built-in, it gets initialized before SNP host support is enabled in snp_rmptable_init() : [ 10.131811] kvm_amd: TSC scaling supported [ 10.136384] kvm_amd: Nested Virtualization enabled [ 10.141734] kvm_amd: Nested Paging enabled [ 10.146304] kvm_amd: LBR virtualization supported [ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509) [ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99) [ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99) [ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported [ 10.177052] kvm_amd: Virtual GIF supported ... ... [ 10.201648] kvm_amd: in svm_enable_virtualization_cpu And then svm_x86_ops->enable_virtualization_cpu() (svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following: wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa); So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs. snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu() as following : ... [ 11.256138] kvm_amd: in svm_enable_virtualization_cpu ... [ 11.264918] SEV-SNP: in snp_rmptable_init This triggers a #GP exception in snp_rmptable_init() when snp_enable() is invoked to set SNP_EN in SYSCFG MSR: [ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30) ... [ 11.294404] Call Trace: [ 11.294482] <IRQ> [ 11.294513] ? show_stack_regs+0x26/0x30 [ 11.294522] ? ex_handler_msr+0x10f/0x180 [ 11.294529] ? search_extable+0x2b/0x40 [ 11.294538] ? fixup_exception+0x2dd/0x340 [ 11.294542] ? exc_general_protection+0x14f/0x440 [ 11.294550] ? asm_exc_general_protection+0x2b/0x30 [ 11.294557] ? __pfx_snp_enable+0x10/0x10 [ 11.294567] ? native_write_msr+0x8/0x30 [ 11.294570] ? __snp_enable+0x5d/0x70 [ 11.294575] snp_enable+0x19/0x20 [ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0 [ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20 [ 11.294589] __sysvec_call_function+0x20/0x90 [ 11.294596] sysvec_call_function+0x80/0xb0 [ 11.294601] </IRQ> [ 11.294603] <TASK> [ 11.294605] asm_sysvec_call_function+0x1f/0x30 ... [ 11.294631] arch_cpu_idle+0xd/0x20 [ 11.294633] default_idle_call+0x34/0xd0 [ 11.294636] do_idle+0x1f1/0x230 [ 11.294643] ? complete+0x71/0x80 [ 11.294649] cpu_startup_entry+0x30/0x40 [ 11.294652] start_secondary+0x12d/0x160 [ 11.294655] common_startup_64+0x13e/0x141 [ 11.294662] </TASK> This #GP exception is getting triggered due to the following errata for AMD family 19h Models 10h-1Fh Processors: Processor may generate spurious #GP(0) Exception on WRMSR instruction: Description: The Processor will generate a spurious #GP(0) Exception on a WRMSR instruction if the following conditions are all met: - the target of the WRMSR is a SYSCFG register. - the write changes the value of SYSCFG.SNPEn from 0 to 1. - One of the threads that share the physical core has a non-zero value in the VM_HSAVE_PA MSR. The document being referred to above: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf To summarize, with kvm_amd module being built-in, KVM/SVM initialization happens before host SNP is enabled and this SVM initialization sets VM_HSAVE_PA to non-zero, which then triggers a #GP when SYSCFG.SNPEn is being set and this will subsequently cause SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not set on all CPUs. Essentially SNP host enabling code should be invoked before KVM initialization, which is currently not the case when KVM is built-in. Add fix to call snp_rmptable_init() early from iommu_snp_enable() directly and not invoked via device_initcall() which enables SNP host support before KVM initialization with kvm_amd module built-in. Add additional handling for `iommu=off` or `amd_iommu=off` options. Note that IOMMUs need to be enabled for SNP initialization, therefore, if host SNP support is enabled but late IOMMU initialization fails then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity checks in SNP firmware will fail with invalid configuration error as below: [ 9.723114] ccp 0000:23:00.1: sev enabled [ 9.727602] ccp 0000:23:00.1: psp enabled [ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002) [ 9.739098] ccp 0000:a2:00.1: no command queues available [ 9.745167] ccp 0000:a2:00.1: psp enabled [ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3 [ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5 Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature") Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de> Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14KVM: SVM: Ensure PSP module is initialized if KVM module is built-inSean Christopherson
The kernel's initcall infrastructure lacks the ability to express dependencies between initcalls, whereas the modules infrastructure automatically handles dependencies via symbol loading. Ensure the PSP SEV driver is initialized before proceeding in sev_hardware_setup() if KVM is built-in as the dependency isn't handled by the initcall infrastructure. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Message-ID: <f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14crypto: ccp: Add external API interface for PSP module initializationSean Christopherson
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be loaded before KVM module. In case of module loading any dependent modules are automatically loaded but in case of built-in modules there is no inherent mechanism available to specify dependencies between modules and ensure that any dependent modules are loaded implicitly. Add a new external API interface for PSP module initialization which allows PSP SEV driver to be loaded explicitly if KVM is built-in. Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14Merge tag 'kvmarm-fixes-6.14-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.14, take #2 - Large set of fixes for vector handling, specially in the interactions between host and guest state. This fixes a number of bugs affecting actual deployments, and greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland for dealing with this thankless task. - Fix an ugly race between vcpu and vgic creation/init, resulting in unexpected behaviours. - Fix use of kernel VAs at EL2 when emulating timers with nVHE. - Small set of pKVM improvements and cleanups.
2025-02-14Merge tag 'thermal-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "Fix a regression caused by an inadvertent change of the THERMAL_GENL_ATTR_CPU_CAPABILITY value in one of the recent thermal commits (Zhang Rui) and drop a stale piece of documentation (Daniel Lezcano)" * tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/cpufreq_cooling: Remove structure member documentation thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
2025-02-14Merge tag 'mmc-v6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - mtk-sd: Fix register settings for hs400(es) mode - sdhci_am654: Revert patch for start-signal-voltage-switch * tag 'mmc-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mtk-sd: Fix register settings for hs400(es) mode Revert "mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch"
2025-02-14Merge tag 'v6.14-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fix from Steve French: "SMB3 client multichannel fix" * tag 'v6.14-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: pick channels for individual subrequests
2025-02-14Merge tag 'efi-fixes-for-v6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: "Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute into account when placing the kernel image in memory at boot. Otherwise, the presence of the kernel image could prevent such a memory region from being unplugged at runtime if it was 'cold plugged', i.e., already plugged in at boot time (and exposed via the EFI memory map). This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory attribute is used consistently by Linux before it ever turns up in production, ensuring that we can make meaningful use of it without running the risk of regressing existing users" * tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Use BIT_ULL() constants for memory attributes efi: Avoid cold plugged memory for placing the kernel
2025-02-14net: wwan: mhi_wwan_mbim: Silence sequence number glitch errorsStephan Gerhold
When using the Qualcomm X55 modem on the ThinkPad X13s, the kernel log is constantly being filled with errors related to a "sequence number glitch", e.g.: [ 1903.284538] sequence number glitch prev=16 curr=0 [ 1913.812205] sequence number glitch prev=50 curr=0 [ 1923.698219] sequence number glitch prev=142 curr=0 [ 2029.248276] sequence number glitch prev=1555 curr=0 [ 2046.333059] sequence number glitch prev=70 curr=0 [ 2076.520067] sequence number glitch prev=272 curr=0 [ 2158.704202] sequence number glitch prev=2655 curr=0 [ 2218.530776] sequence number glitch prev=2349 curr=0 [ 2225.579092] sequence number glitch prev=6 curr=0 Internet connectivity is working fine, so this error seems harmless. It looks like modem does not preserve the sequence number when entering low power state; the amount of errors depends on how actively the modem is being used. A similar issue has also been seen on USB-based MBIM modems [1]. However, in cdc_ncm.c the "sequence number glitch" message is a debug message instead of an error. Apply the same to the mhi_wwan_mbim.c driver to silence these errors when using the modem. [1]: https://lists.freedesktop.org/archives/libmbim-devel/2016-November/000781.html Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250212-mhi-wwan-mbim-sequence-glitch-v1-1-503735977cbd@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-14gve: Update MAINTAINERSJeroen de Borst
Updating MAINTAINERS to include active contributers. Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250213184523.2002582-1-jeroendb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-14Merge tag 'block-6.14-20250214' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - Fix for request rejection for batch addition - Fix a few issues for bogus mac partition tables * tag 'block-6.14-20250214' of git://git.kernel.dk/linux: partitions: mac: fix handling of bogus partition table block: cleanup and fix batch completion adding conditions
2025-02-14Merge tag 'io_uring-6.14-20250214' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: - fixes for a potential data corruption issue with IORING_OP_URING_CMD, where not all the SQE data is stable. Will be revisited in the future, for now it ends up with just always copying it beyond prep to provide the same guarantees as all other opcodes - make the waitid opcode setup async data like any other opcodes (no real fix here, just a consistency thing) - fix for waitid io_tw_state abuse - when a buffer group is type is changed, do so by allocating a new buffer group entry and discard the old one, rather than migrating * tag 'io_uring-6.14-20250214' of git://git.kernel.dk/linux: io_uring/uring_cmd: unconditionally copy SQEs at prep time io_uring/waitid: setup async data in the prep handler io_uring/uring_cmd: remove dead req_has_async_data() check io_uring/uring_cmd: switch sqe to async_data on EAGAIN io_uring/uring_cmd: don't assume io_uring_cmd_data layout io_uring/kbuf: reallocate buf lists on upgrade io_uring/waitid: don't abuse io_tw_state
2025-02-14Merge tag 'sched_ext-for-6.14-rc2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - Fix lock imbalance in a corner case of dispatch_to_local_dsq() - Migration disabled tasks were confusing some BPF schedulers and its handling had a bug. Fix it and simplify the default behavior by dispatching them automatically - ops.tick(), ops.disable() and ops.exit_task() were incorrectly disallowing kfuncs that require the task argument to be the rq operation is currently operating on and thus is rq-locked. Allow them. - Fix autogroup migration handling bug which was occasionally triggering a warning in the cgroup migration path - tools/sched_ext, selftest and other misc updates * tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h. sched_ext: selftests: Fix grammar in tests description sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq() sched_ext: Fix migration disabled handling in targeted dispatches sched_ext: Implement auto local dispatching of migration disabled tasks sched_ext: Fix incorrect time delta calculation in time_delta() sched_ext: Fix lock imbalance in dispatch_to_local_dsq() sched_ext: selftests/dsp_local_on: Fix selftest on UP systems tools/sched_ext: Add helper to check task migration state sched_ext: Fix incorrect autogroup migration detection sched_ext: selftests/dsp_local_on: Fix sporadic failures selftests/sched_ext: Fix enum resolution sched_ext: Include task weight in the error state dump sched_ext: Fixes typos in comments
2025-02-14alpha: Use str_yes_no() helper in pci_dac_dma_supported()Thorsten Blum
Remove hard-coded strings by using the str_yes_no() helper function. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Matt Turner <mattst88@gmail.com>
2025-02-14alpha: Replace one-element array with flexible array memberThorsten Blum
Replace the deprecated one-element array with a modern flexible array member in the struct crb_struct. Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Matt Turner <mattst88@gmail.com>
2025-02-14alpha: align stack for page fault and user unaligned trap handlersIvan Kokshaysky
do_page_fault() and do_entUna() are special because they use non-standard stack frame layout. Fix them manually. Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com>
2025-02-14alpha: make stack 16-byte aligned (most cases)Ivan Kokshaysky
The problem is that GCC expects 16-byte alignment of the incoming stack since early 2004, as Maciej found out [1]: Having actually dug speculatively I can see that the psABI was changed in GCC 3.5 with commit e5e10fb4a350 ("re PR target/14539 (128-bit long double improperly aligned)") back in Mar 2004, when the stack pointer alignment was increased from 8 bytes to 16 bytes, and arch/alpha/kernel/entry.S has various suspicious stack pointer adjustments, starting with SP_OFF which is not a whole multiple of 16. Also, as Magnus noted, "ALPHA Calling Standard" [2] required the same: D.3.1 Stack Alignment This standard requires that stacks be octaword aligned at the time a new procedure is invoked. However: - the "normal" kernel stack is always misaligned by 8 bytes, thanks to the odd number of 64-bit words in 'struct pt_regs', which is the very first thing pushed onto the kernel thread stack; - syscall, fault, interrupt etc. handlers may, or may not, receive aligned stack depending on numerous factors. Somehow we got away with it until recently, when we ended up with a stack corruption in kernel/smp.c:smp_call_function_single() due to its use of 32-byte aligned local data and the compiler doing clever things allocating it on the stack. This adds padding between the PAL-saved and kernel-saved registers so that 'struct pt_regs' have an even number of 64-bit words. This makes the stack properly aligned for most of the kernel code, except two handlers which need special threatment. Note: struct pt_regs doesn't belong in uapi/asm; this should be fixed, but let's put this off until later. Link: https://lore.kernel.org/rcu/alpine.DEB.2.21.2501130248010.18889@angie.orcam.me.uk/ [1] Link: https://bitsavers.org/pdf/dec/alpha/Alpha_Calling_Standard_Rev_2.0_19900427.pdf [2] Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com>
2025-02-14alpha: replace hardcoded stack offsets with autogenerated onesIvan Kokshaysky
This allows the assembly in entry.S to automatically keep in sync with changes in the stack layout (struct pt_regs and struct switch_stack). Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com>
2025-02-14Merge tag 'cgroup-for-6.14-rc2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - Fix a race window where a newly forked task could escape cgroup.kill - Remove incorrectly included steal time from cpu.stat::usage_usec - Minor update in selftest * tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Remove steal time from usage_usec selftests/cgroup: use bash in test_cpuset_v1_hp.sh cgroup: fix race between fork and cgroup.kill
2025-02-14Merge tag 'wq-for-6.14-rc2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: - Fix a regression where a worker pool can be freed before rescuer workers are done with it leading to user-after-free * tag 'wq-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Put the pwq after detaching the rescuer from the pool
2025-02-14Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Fix kexec and hibernation when using 5-level page-table configuration - Remove references to non-existent SF8MM4 and SF8MM8 ID register fields, hooking up hwcaps for the FPRCVT, F8MM4 and F8MM8 fields instead - Drop unused .ARM.attributes ELF sections - Fix array indexing when probing CPU cache topology from firmware - Fix potential use-after-free in AMU initialisation code - Work around broken GTDT entries by tolerating excessively large timer arrays - Force use of Rust's "softfloat" target to avoid a threatening warning about the NEON target feature - Typo fix in GCS documentation and removal of duplicate Kconfig select * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: rust: clean Rust 1.85.0 warning using softfloat target arm64: Add missing registrations of hwcaps ACPI: GTDT: Relax sanity checking on Platform Timers array count arm64: amu: Delay allocating cpumask for AMU FIE support arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array arm64: Handle .ARM.attributes section in linker scripts arm64/hwcap: Remove stray references to SF8MMx arm64/gcs: Fix documentation for HWCAP arm64: Kconfig: Remove selecting replaced HAVE_FUNCTION_GRAPH_RETVAL arm64: Fix 5-level paging support in kexec/hibernate trampoline
2025-02-14ring-buffer: Validate the persistent meta data subbuf arraySteven Rostedt
The meta data for a mapped ring buffer contains an array of indexes of all the subbuffers. The first entry is the reader page, and the rest of the entries lay out the order of the subbuffers in how the ring buffer link list is to be created. The validator currently makes sure that all the entries are within the range of 0 and nr_subbufs. But it does not check if there are any duplicates. While working on the ring buffer, I corrupted this array, where I added duplicates. The validator did not catch it and created the ring buffer link list on top of it. Luckily, the corruption was only that the reader page was also in the writer path and only presented corrupted data but did not crash the kernel. But if there were duplicates in the writer side, then it could corrupt the ring buffer link list and cause a crash. Create a bitmask array with the size of the number of subbuffers. Then clear it. When walking through the subbuf array checking to see if the entries are within the range, test if its bit is already set in the subbuf_mask. If it is, then there is duplicates and fail the validation. If not, set the corresponding bit and continue. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214102820.7509ddea@gandalf.local.home Fixes: c76883f18e59b ("ring-buffer: Add test if range of boot buffer is valid") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-14tracing: Have the error of __tracing_resize_ring_buffer() passed to userSteven Rostedt
Currently if __tracing_resize_ring_buffer() returns an error, the tracing_resize_ringbuffer() returns -ENOMEM. But it may not be a memory issue that caused the function to fail. If the ring buffer is memory mapped, then the resizing of the ring buffer will be disabled. But if the user tries to resize the buffer, it will get an -ENOMEM returned, which is confusing because there is plenty of memory. The actual error returned was -EBUSY, which would make much more sense to the user. Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250213134132.7e4505d7@gandalf.local.home Fixes: 117c39200d9d7 ("ring-buffer: Introducing ring-buffer mapping functions") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-02-14ring-buffer: Unlock resize on mmap errorSteven Rostedt
Memory mapping the tracing ring buffer will disable resizing the buffer. But if there's an error in the memory mapping like an invalid parameter, the function exits out without re-enabling the resizing of the ring buffer, preventing the ring buffer from being resized after that. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250213131957.530ec3c5@gandalf.local.home Fixes: 117c39200d9d7 ("ring-buffer: Introducing ring-buffer mapping functions") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-14Merge tag 'iommu-fixes-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Joerg Roedel: - core: fix potential memory leak in iopf_queue_remove_device() - Intel VT-d: handle faults correctly in intel_iommu_drain_pasid_prq() - AMD-Vi: fix faults happening in resume path - typo and spelling fixes * tag 'iommu-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/vt-d: Make intel_iommu_drain_pasid_prq() cover faults for RID iommu/exynos: Fix typos iommu: Fix a spelling error iommu/amd: Expicitly enable CNTRL.EPHEn bit in resume path iommu: Fix potential memory leak in iopf_queue_remove_device()
2025-02-14Merge tag 'i2c-host-fixes-6.14-rc3' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current i2c-host-fixes for v6.14-rc3 - Mukesh and Viken take over maintainership of the Qualcomm I2C driver. - Krzysztof Adamski is removed as maintainer of the Axxia I2C driver.
2025-02-14Merge tag 'for-linus-6.14-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Three fixes to xen-swiotlb driver: - two fixes for issues coming up due to another fix in 6.12 - addition of an __init annotation" * tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Xen/swiotlb: mark xen_swiotlb_fixup() __init x86/xen: allow larger contiguous memory regions in PV guests xen/swiotlb: relax alignment requirements
2025-02-14partitions: mac: fix handling of bogus partition tableJann Horn
Fix several issues in partition probing: - The bailout for a bad partoffset must use put_dev_sector(), since the preceding read_part_sector() succeeded. - If the partition table claims a silly sector size like 0xfff bytes (which results in partition table entries straddling sector boundaries), bail out instead of accessing out-of-bounds memory. - We must not assume that the partition table contains proper NUL termination - use strnlen() and strncmp() instead of strlen() and strcmp(). Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20250214-partition-mac-v1-1-c1c626dffbd5@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-14virtio_snd.h: clarify that `controls` depends on VIRTIO_SND_F_CTLSStefano Garzarella
As defined in the specification, the `controls` field in the configuration space is only valid/present if VIRTIO_SND_F_CTLS is negotiated. From https://docs.oasis-open.org/virtio/virtio/v1.3/virtio-v1.3.html: 5.14.4 Device Configuration Layout ... controls (driver-read-only) indicates a total number of all available control elements if VIRTIO_SND_F_CTLS has been negotiated. Let's use the same style used in virtio_blk.h to clarify this and to avoid confusion as happened in QEMU (see link). Link: https://gitlab.com/qemu-project/qemu/-/issues/2805 Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250213161825.139952-1-sgarzare@redhat.com
2025-02-14serial: 8250: Fix fifo underflow on flushJohn Keeping
When flushing the serial port's buffer, uart_flush_buffer() calls kfifo_reset() but if there is an outstanding DMA transfer then the completion function will consume data from the kfifo via uart_xmit_advance(), underflowing and leading to ongoing DMA as the driver tries to transmit another 2^32 bytes. This is readily reproduced with serial-generic and amidi sending even short messages as closing the device on exit will wait for the fifo to drain and in the underflow case amidi hangs for 30 seconds on exit in tty_wait_until_sent(). A trace of that gives: kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3 amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3 irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293 irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197 irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101 irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096 Since the port lock is held in when the kfifo is reset in uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer hook to adjust the outstanding DMA byte count is sufficient to avoid the kfifo underflow. Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Cc: stable <stable@kernel.org> Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14xfs: flush inodegc before swaponChristoph Hellwig
Fix the brand new xfstest that tries to swapon on a recently unshared file and use the chance to document the other bit of magic in this function. The big comment is taken from a mailinglist post by Dave Chinner. Fixes: 5e672cd69f0a53 ("xfs: introduce xfs_inodegc_push()") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-02-14xfs: rename xfs_iomap_swapfile_activate to xfs_vm_swap_activateChristoph Hellwig
Match the method name and the naming convention or address_space operations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-02-14xfs: Do not allow norecovery mount with quotacheckCarlos Maiolino
Mounting a filesystem that requires quota state changing will generate a transaction. We already check for a read-only device; we should do that for norecovery too. A quotacheck on a norecovery mount, and with the right log size, will cause the mount process to hang on: [<0>] xlog_grant_head_wait+0x5d/0x2a0 [xfs] [<0>] xlog_grant_head_check+0x112/0x180 [xfs] [<0>] xfs_log_reserve+0xe3/0x260 [xfs] [<0>] xfs_trans_reserve+0x179/0x250 [xfs] [<0>] xfs_trans_alloc+0x101/0x260 [xfs] [<0>] xfs_sync_sb+0x3f/0x80 [xfs] [<0>] xfs_qm_mount_quotas+0xe3/0x2f0 [xfs] [<0>] xfs_mountfs+0x7ad/0xc20 [xfs] [<0>] xfs_fs_fill_super+0x762/0xa50 [xfs] [<0>] get_tree_bdev_flags+0x131/0x1d0 [<0>] vfs_get_tree+0x26/0xd0 [<0>] vfs_cmd_create+0x59/0xe0 [<0>] __do_sys_fsconfig+0x4e3/0x6b0 [<0>] do_syscall_64+0x82/0x160 [<0>] entry_SYSCALL_64_after_hwframe+0x76/0x7e This is caused by a transaction running with bogus initialized head/tail I initially hit this while running generic/050, with random log sizes, but I managed to reproduce it reliably here with the steps below: mkfs.xfs -f -lsize=1025M -f -b size=4096 -m crc=1,reflink=1,rmapbt=1, -i sparse=1 /dev/vdb2 > /dev/null mount -o usrquota,grpquota,prjquota /dev/vdb2 /mnt xfs_io -x -c 'shutdown -f' /mnt umount /mnt mount -o ro,norecovery,usrquota,grpquota,prjquota /dev/vdb2 /mnt Last mount hangs up As we add yet another validation if quota state is changing, this also add a new helper named xfs_qm_validate_state_change(), factoring the quota state changes out of xfs_qm_newmount() to reduce cluttering within it. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-02-14xfs: do not check NEEDSREPAIR if ro,norecovery mount.Lukas Herbolt
If there is corrutpion on the filesystem andxfs_repair fails to repair it. The last resort of getting the data is to use norecovery,ro mount. But if the NEEDSREPAIR is set the filesystem cannot be mounted. The flag must be cleared out manually using xfs_db, to get access to what left over of the corrupted fs. Signed-off-by: Lukas Herbolt <lukas@herbolt.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-02-14xfs: fix data fork format filtering during inode repairDarrick J. Wong
Coverity noticed that xrep_dinode_bad_metabt_fork never runs because XFS_DINODE_FMT_META_BTREE is always filtered out in the mode selection switch of xrep_dinode_check_dfork. Metadata btrees are allowed only in the data forks of regular files, so add this case explicitly. I guess this got fubard during a refactoring prior to 6.13 and I didn't notice until now. :/ Coverity-id: 1617714 Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-02-14xfs: fix online repair probing when CONFIG_XFS_ONLINE_REPAIR=nDarrick J. Wong
I received a report from the release engineering side of the house that xfs_scrub without the -n flag (aka fix it mode) would try to fix a broken filesystem even on a kernel that doesn't have online repair built into it: # xfs_scrub -dTvn /mnt/test EXPERIMENTAL xfs_scrub program in use! Use at your own risk! Phase 1: Find filesystem geometry. /mnt/test: using 1 threads to scrub. Phase 1: Memory used: 132k/0k (108k/25k), time: 0.00/ 0.00/ 0.00s <snip> Phase 4: Repair filesystem. <snip> Info: /mnt/test/some/victimdir directory entries: Attempting repair. (repair.c line 351) Corruption: /mnt/test/some/victimdir directory entries: Repair unsuccessful; offline repair required. (repair.c line 204) Source: https://blogs.oracle.com/linux/post/xfs-online-filesystem-repair It is strange that xfs_scrub doesn't refuse to run, because the kernel is supposed to return EOPNOTSUPP if we actually needed to run a repair, and xfs_io's repair subcommand will perror that. And yet: # xfs_io -x -c 'repair probe' /mnt/test # The first problem is commit dcb660f9222fd9 (4.15) which should have had xchk_probe set the CORRUPT OFLAG so that any of the repair machinery will get called at all. It turns out that some refactoring that happened in the 6.6-6.8 era broke the operation of this corner case. What we *really* want to happen is that all the predicates that would steer xfs_scrub_metadata() towards calling xrep_attempt() should function the same way that they do when repair is compiled in; and then xrep_attempt gets to return the fatal EOPNOTSUPP error code that causes the probe to fail. Instead, commit 8336a64eb75cba (6.6) started the failwhale swimming by hoisting OFLAG checking logic into a helper whose non-repair stub always returns false, causing scrub to return "repair not needed" when in fact the repair is not supported. Prior to that commit, the oflag checking that was open-coded in scrub.c worked correctly. Similarly, in commit 4bdfd7d15747b1 (6.8) we hoisted the IFLAG_REPAIR and ALREADY_FIXED logic into a helper whose non-repair stub always returns false, so we never enter the if test body that would have called xrep_attempt, let alone fail to decode the OFLAGs correctly. The final insult (yes, we're doing The Naked Gun now) is commit 48a72f60861f79 (6.8) in which we hoisted the "are we going to try a repair?" predicate into yet another function with a non-repair stub always returns false. Fix xchk_probe to trigger xrep_probe if repair is enabled, or return EOPNOTSUPP directly if it is not. For all the other scrub types, we need to fix the header predicates so that the ->repair functions (which are all xrep_notsupported) get called to return EOPNOTSUPP. Commit 48a72 is tagged here because the scrub code prior to LTS 6.12 are incomplete and not worth patching. Reported-by: David Flynn <david.flynn@oracle.com> Cc: <stable@vger.kernel.org> # v6.8 Fixes: 8336a64eb75c ("xfs: don't complain about unfixed metadata when repairs were injected") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-02-14usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERYJos Wang
As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is used by the Policy Engine in Dual-Role Power device that is currently acting as a Sink to timeout on a PS_RDY Message during a Power Role Swap sequence. This condition leads to a Hard Reset for USB Type-A and Type-B Plugs and Error Recovery for Type-C plugs and return to USB Default Operation. Therefore, after PSSourceOffTimer timeout, the tcpm state machine should switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also solve the test items in the USB power delivery compliance test: TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout [1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable <stable@kernel.org> Signed-off-by: Jos Wang <joswang@lenovo.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Amit Sunil Dhamne <amitsd@google.com> Link: https://lore.kernel.org/r/20250213134921.3798-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: roles: set switch registered flag early onElson Roy Serrao
The role switch registration and set_role() can happen in parallel as they are invoked independent of each other. There is a possibility that a driver might spend significant amount of time in usb_role_switch_register() API due to the presence of time intensive operations like component_add() which operate under common mutex. This leads to a time window after allocating the switch and before setting the registered flag where the set role notifications are dropped. Below timeline summarizes this behavior Thread1 | Thread2 usb_role_switch_register() | | | ---> allocate switch | | | ---> component_add() | usb_role_switch_set_role() | | | | | --> Drop role notifications | | since sw->registered | | flag is not set. | | --->Set registered flag.| To avoid this, set the registered flag early on in the switch register API. Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: gadget: uvc: Fix unstarted kthread workerFrederic Weisbecker
The behaviour of kthread_create_worker() was recently changed to align with the one of kthread_create(). The kthread worker is created but not awaken by default. This is to allow the use of kthread_affine_preferred() and kthread_bind[_mask]() with kthread workers. In order to keep the old behaviour and wake the kthread up, kthread_run_worker() must be used. All the pre-existing users have been converted, except for UVC that was introduced in the same merge window as the API change. This results in hangs: INFO: task UVCG:82 blocked for more than 491 seconds. Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1 task:UVCG state:D stack:0 pid:82 Call Trace: __schedule schedule schedule_preempt_disabled kthread ? kthread_flush_work ret_from_fork ret_from_fork_asm entry_INT80_32 Fix this with converting UVCG kworker to the new API. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com Fixes: f0bbfbd16b3b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue") Cc: stable <stable@kernel.org> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast distLei Huang
Teclast disk used on Huawei hisi platforms doesn't work well, losing connectivity intermittently if LPM is enabled. Add quirk disable LPM to resolve the issue. Signed-off-by: Lei Huang <huanglei@kylinos.cn> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: gadget: core: flush gadget workqueue after device removalRoy Luo
device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up. Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable <stable@kernel.org> Signed-off-by: Roy Luo <royluo@google.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: gadget: f_midi: f_midi_complete to call queue_workJill Donahue
When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler. Link: https://lore.kernel.org/all/CAArt=LjxU0fUZOj06X+5tkeGT+6RbXzpWg1h4t4Fwa_KGVAX6g@mail.gmail.com/ Fixes: d5daf49b58661 ("USB: gadget: midi: add midi function driver") Cc: stable <stable@kernel.org> Signed-off-by: Jill Donahue <jilliandonahue58@gmail.com> Link: https://lore.kernel.org/r/20250211174805.1369265-1-jdonahue@fender.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 15:02:22 +0000