| Age | Commit message (Collapse) | Author |
|---|
|
Remove macros that are already defined at more appropriate places.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The first KSZ8 series implementation was done for a KSZ8795 device but
since several other KSZ8 devices have been added. Rename these files
to adhere to the ksz8 naming convention as already used in most
functions and the existing ksz8.h; add an explanatory note.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Select CRYPTO_AUTHENC as the function crypto_authenec_extractkeys
may not be available without it.
Fixes: 311eea7e37c4 ("crypto: octeontx - Fix authenc setkey")
Fixes: 7ccb750dcac8 ("crypto: octeontx2 - Fix authenc setkey")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409042013.gT2ZI4wR-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When a crypto algorithm with a higher priority is registered, it
kills the spawns of all lower-priority algorithms. Thus it is to
be expected for an algorithm to go away at any time, even during
a self-test. This is now much more common with asynchronous testing.
Remove the printk when an ENOENT is encountered during a self-test.
This is not really an error since the algorithm being tested is no
longer there (i.e., it didn't fail the test which is what we care
about).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is a extraneous space after a newline in a pr_err message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is a extraneous space after a newline in a dev_err message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pass any errors we get during instance creation up through the
larval.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Fri, Aug 30, 2024 at 10:51:54AM -0700, Eric Biggers wrote:
>
> Given below in defconfig form, use 'make olddefconfig' to apply. The failures
> are nondeterministic and sometimes there are different ones, for example:
>
> [ 0.358017] alg: skcipher: failed to allocate transform for cbc(twofish-generic): -2
> [ 0.358365] alg: self-tests for cbc(twofish) using cbc(twofish-generic) failed (rc=-2)
> [ 0.358535] alg: skcipher: failed to allocate transform for cbc(camellia-generic): -2
> [ 0.358918] alg: self-tests for cbc(camellia) using cbc(camellia-generic) failed (rc=-2)
> [ 0.371533] alg: skcipher: failed to allocate transform for xts(ecb(aes-generic)): -2
> [ 0.371922] alg: self-tests for xts(aes) using xts(ecb(aes-generic)) failed (rc=-2)
>
> Modules are not enabled, maybe that matters (I haven't checked yet).
Yes I think that was the key. This triggers a massive self-test
run which executes in parallel and reveals a few race conditions
in the system. I think it boils down to the following scenario:
Base algorithm X-generic, X-optimised
Template Y
Optimised algorithm Y-X-optimised
Everything gets registered, and then the self-tests are started.
When Y-X-optimised gets tested, it requests the creation of the
generic Y(X-generic). Which then itself undergoes testing.
The race is that after Y(X-generic) gets registered, but just
before it gets tested, X-optimised finally finishes self-testing
which then causes all spawns of X-generic to be destroyed. So
by the time the self-test for Y(X-generic) comes along, it can
no longer find the algorithm. This error then bubbles up all
the way up to the self-test of Y-X-optimised which then fails.
Note that there is some complexity that I've omitted here because
when the generic self-test fails to find Y(X-generic) it actually
triggers the construction of it again which then fails for various
other reasons (these are not important because the construction
should *not* be triggered at this point).
So in a way the error is expected, and we should probably remove
the pr_err for the case where ENOENT is returned for the algorithm
that we're currently testing.
The solution is two-fold. First when an algorithm undergoes
self-testing it should not trigger its construction. Secondly
if an instance larval fails to materialise due to it being destroyed
by a more optimised algorithm coming along, it should obviously
retry the construction.
Remove the check in __crypto_alg_lookup that stops a larval from
matching new requests based on differences in the mask. It is better
to block new requests even if it is wrong and then simply retry the
lookup. If this ends up being the wrong larval it will sort iself
out during the retry.
Reduce the CRYPTO_ALG_TYPE_MASK bits in type during larval creation
as otherwise LSKCIPHER algorithms may not match SKCIPHER larvals.
Also block the instance creation during self-testing in the function
crypto_larval_lookup by checking for CRYPTO_ALG_TESTED in the mask
field.
Finally change the return value when crypto_alg_lookup fails in
crypto_larval_wait to EAGAIN to redo the lookup.
Fixes: 37da5d0ffa7b ("crypto: api - Do not wait for tests during registration")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close master
ooo before stopping queue to ensure that the device does not access
the released memory.
Fixes: 6c6dd5802c2d ("crypto: hisilicon/qm - add controller reset interface")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The timeout threshold of the hpre cluster is 16ms. When the CPU
and device share virtual address, page fault processing time may
exceed the threshold.
In the current test, there is a high probability that the
cluster times out. However, the cluster is waiting for the
completion of memory access, which is not an error, the device
does not need to be reset. If an error occurs in the cluster,
qm also reports the error. Therefore, the cluster timeout
error of hpre can be masked.
Fixes: d90fab0deb8e ("crypto: hisilicon/qm - get error type from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Before the device is enabled again, the device may still
store the previously processed data. If an error occurs in
the previous task, the device may fail to be enabled again.
Therefore, before enabling device, reset the device to restore
the initial state.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Header files is included Order-ref: standard library headers,
OS library headers, and project-specific headers. This patch
modifies the order of header files according to suggestions.
In addition, use %u to print unsigned int variables to prevent
overflow.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Apply for a lock before the qp send operation to ensure no
resource race in multi-concurrency situations.
This modification has almost no impact on performance.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If an error occurs in the process after the SGL is mapped
successfully, it need to unmap the SGL.
Otherwise, memory problems may occur.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
While sending a command to the PSP, we always requested an interrupt
from the PSP after command completion. This worked for most cases. For
the special case of irqs being disabled -- e.g. when running within
crashdump or kexec contexts, we should not set the SEV_CMDRESP_IOC flag,
so the PSP knows to not attempt interrupt delivery.
Fixes: 8ef979584ea8 ("crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump")
Based-on-patch-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Amit Shah <amit.shah@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Update the kconfig help and module description to reflect that VAES
instructions are now used in some cases. Also fix XTR => XCTR.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace pm_runtime_enable with the devres-enabled version which
can trigger pm_runtime_disable.
Otherwise, the below appears during reload driver.
mtk_rng 1020f000.rng: Unbalanced pm_runtime_enable!
Fixes: 81d2b34508c6 ("hwrng: mtk - add runtime PM support")
Cc: <stable@vger.kernel.org>
Suggested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
A larger set of fixes than I'd like at this point, but mainly due to
people working on fixing module autoloading by adding missing exports of
ID tables rather than anything particularly concerning. There are some
other runtime fixes and quirks, and a tweak to the ABI definition for
SOF which ensures that a struct layout doesn't vary depending on the
architecture of the host.
|
|
Justin Lai says:
====================
Add Realtek automotive PCIe driver
This series includes adding realtek automotive ethernet driver
and adding rtase ethernet driver entry in MAINTAINERS file.
This ethernet device driver for the PCIe interface of
Realtek Automotive Ethernet Switch,applicable to
RTL9054, RTL9068, RTL9072, RTL9075, RTL9068, RTL9071.
====================
Link: https://patch.msgid.link/20240904032114.247117-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add myself and Larry Chiu as the maintainer for the rtase ethernet driver.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-14-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
1. Add the RTASE entry in the Kconfig.
2. Add the CONFIG_RTASE entry in the Makefile.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-13-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a Makefile in the rtase folder to build rtase driver.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-12-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the ethtool function to support users to obtain network card
information, including obtaining various device settings, Report whether
physical link is up, Report pause parameters, Set pause parameters,
Return extended statistics about the device.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-11-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the pci_driver suspend function to enable the device
to sleep, and implement the resume function to enable the device
to resume operation.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-10-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
1. Implement .ndo_set_rx_mode so that the device can change address
list filtering.
2. Implement .ndo_set_mac_address so that mac address can be changed.
3. Implement .ndo_change_mtu so that mtu can be changed.
4. Implement .ndo_tx_timeout to perform related processing when the
transmitter does not make any progress.
5. Implement .ndo_get_stats64 to provide statistics that are called
when the user wants to get network device usage.
6. Implement .ndo_vlan_rx_add_vid to register VLAN ID when the device
supports VLAN filtering.
7. Implement .ndo_vlan_rx_kill_vid to unregister VLAN ID when the device
supports VLAN filtering.
8. Implement the .ndo_setup_tc to enable setting any "tc" scheduler,
classifier or action on dev.
9. Implement .ndo_fix_features enables adjusting requested feature flags
based on device-specific constraints.
10. Implement .ndo_set_features enables updating device configuration to
new features.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-9-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement rx_handler to read the information of the rx descriptor,
thereby checking the packet accordingly and storing the packet
in the socket buffer to complete the reception of the packet.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-8-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement .ndo_start_xmit function to fill the information of the packet
to be transmitted into the tx descriptor, and then the hardware will
transmit the packet using the information in the tx descriptor.
In addition, we also implemented the tx_handler function to enable the
tx descriptor to be reused.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-7-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement rtase_hw_config to set default hardware settings, including
setting interrupt mitigation, tx/rx DMA burst, interframe gap time,
rx packet filter, near fifo threshold and fill descriptor ring and
tally counter address, and enable flow control. When filling the
rx descriptor ring, the first group of queues needs to be processed
separately because the positions of the first group of queues are not
regular with other subsequent groups. The other queues are all newly
added features, but we want to retain the original design. So they were
not put together.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-6-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
1. Implement rtase_interrupt to handle txQ0/rxQ0, txQ4~txQ7 interrupts,
and implement rtase_q_interrupt to handle txQ1/rxQ1, txQ2/rxQ2 and
txQ3/rxQ3 interrupts.
2. Implement rtase_poll to call ring_handler to process the tx or
rx packet of each ring. If the returned value is budget,it means that
there is still work of a certain ring that has not yet been completed.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-5-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the rtase_down function to disable hardware setting
and interrupt and clear descriptor ring.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-4-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the .ndo_open function to set default hardware settings
and initialize the descriptor ring and interrupts. Among them,
when requesting interrupt, because the first group of interrupts
needs to process more events, the overall structure and interrupt
handler will be different from other groups of interrupts, so it
needs to be handled separately. The first set of interrupt handlers
need to handle the interrupt status of RXQ0 and TXQ0, TXQ4~7,
while other groups of interrupt handlers will handle the interrupt
status of RXQ1&TXQ1 or RXQ2&TXQ2 or RXQ3&TXQ3 according to the
interrupt vector.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-3-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for a pci table in this module, and implement pci_driver
function to initialize this driver, remove this driver, or shutdown
this driver.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-2-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix crash when btf_parse_base() returns an error (Martin Lau)
- Fix out of bounds access in btf_name_valid_section() (Jeongjun Park)
* tag 'bpf-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a selftest to check for incorrect names
bpf: add check for invalid name in btf_name_valid_section()
bpf: Fix a crash when btf_parse_base() returns an error pointer
|
|
Fill another small gap in the nftables spec so that it is possible to
dump a tailscale ruleset with:
tools/net/ynl/cli.py --spec \
Documentation/netlink/specs/nftables.yaml --dump getrule
This adds support for the 'target' expression.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240904091024.3138-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature")
napi_defer_irqs was added to net_device and napi_defer_irqs_count was
added to napi_struct, both as type int.
This value never goes below zero, so there is not reason for it to be a
signed int. Change the type for both from int to u32, and add an
overflow check to sysfs to limit the value to S32_MAX.
The limit of S32_MAX was chosen because the practical limit before this
patch was S32_MAX (anything larger was an overflow) and thus there are
no behavioral changes introduced. If the extra bit is needed in the
future, the limit can be raised.
Before this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
$ cat /sys/class/net/eth4/napi_defer_hard_irqs
-2147483647
After this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
bash: line 0: echo: write error: Numerical result out of range
Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:
include/linux/netdevice.h: unsigned int tx_queue_len;
And has an overflow check:
dev_change_tx_queue_len(..., unsigned long new_len):
if (new_len != (unsigned int)new_len)
return -ERANGE;
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240904153431.307932-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.11-2024-09-05:
amdgpu:
- IPS workaround
- Fix compatibility with older MES firmware
- Fix CPU spikes when clearing VRAM
- Backlight fix
- PMO fix
- Revert SWSMU change to fix regression
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905190533.854116-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- GSC loading fix (Daniele)
- PCODE mutex fix (Matt)
- Suspend/Resume fixes (Maarten, Imre)
- RPM fixes (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtmyFvDfFLPbuf6A@intel.com
|
|
Adding myself as the primary maintainer and John Kacur as the backup
maintainer for the libcpupower SWIG generated Python bindings.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This script demonstrates how to make use of, and tests, the bindings.
In the future, this script could become part of a larger test suite to
test the bindings and libcpupower.
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
SWIG is a tool packaged in Fedora and other distros that can generate
bindings from C and C++ code for several languages including Python,
Perl, and Go.
These bindings allows users to easily write scripts that use and extend
libcpupower's functionality. Currently, only Python is provided in the
makefile, but additional languages may be added if there is demand.
Added suggestions from Shuah Khan for the README and license discussion.
Note that while SWIG itself is GPL v3+ licensed; the resulting output,
the bindings code, is permissively licensed + the license of the .o
files. Please see
https://swig.org/legal.html and [1] for more details.
[1]
https://lore.kernel.org/linux-pm/Zqv9BOjxLAgyNP5B@hatbackup/
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There was a symbol listed in the powercap.h file that was not implemented.
Implement it with a stub return of 0.
Programs like SWIG require that functions that are defined in the
headers be implemented.
Fixes: c2294c1496b7 ("cpupower: Introduce powercap intel-rapl library and powercap-info command")
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, bluetooth and wireless.
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during
mcp251x_open
- eth: r8152: fix the firmware communication error due to use of bulk
write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h"
* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
ila: call nf_unregister_net_hooks() sooner
tools/net/ynl: fix cli.py --subscribe feature
MAINTAINERS: fix ptp ocp driver maintainers address
selftests: net: enable bind tests
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
sched: sch_cake: fix bulk flow accounting logic for host fairness
docs: netdev: document guidance on cleanup.h
net: xilinx: axienet: Fix race in axienet_stop
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
r8152: fix the firmware doesn't work
fou: Fix null-ptr-deref in GRO.
bareudp: Fix device stats updates.
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
bpf, net: Fix a potential race in do_sock_getsockopt()
net: dqs: Do not use extern for unused dql_group
sch/netem: fix use after free in netem_dequeue
usbnet: modern method to get random MAC
MAINTAINERS: wifi: cw1200: add net-cw1200.h
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes (including some of the widespread
work on fixing missing ID tables for module autoloading and the revert
of some problematic PM work in spi-rockchip), some improvements to the
MAINTAINERS information for the NXP drivers and the addition of a new
device ID to spidev"
* tag 'spi-fix-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi drivers
MAINTAINERS: SPI: Add freescale lpspi maintainer information
spi: spi-fsl-lpspi: Fix off-by-one in prescale max
spi: spidev: Add missing spi_device_id for jg10309-01
spi: bcm63xx: Enable module autoloading
spi: intel: Add check devm_kasprintf() returned value
spi: spidev: Add an entry for elgin,jg10309-01
spi: rockchip: Resolve unbalanced runtime PM / system PM handling
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- drm/i915: Do not attempt to load the GSC multiple times (Daniele Ceraolo Spurio)
- drm/i915: Fix readout degamma_lut mismatch on ilk/snb (Ville Syrjälä)
- drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unused (Andy Shevchenko)
- drm/i915/fence: Mark debug_fence_free() with __maybe_unused (Andy Shevchenko)
- drm/i915/display: Add mechanism to use sink model when applying quirk [display] (Jouni Högander)
- drm/i915/display: Increase Fast Wake Sync length as a quirk [display] (Jouni Högander)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztlo2hVO4SBvfAnq@linux
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A fix from Doug Anderson for a missing stub, required to fix the build
for some newly added users of devm_regulator_bulk_get_const() in
!REGULATOR configurations"
* tag 'regulator-fix-v6.11-stub' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Stub devm_regulator_bulk_get_const() if !CONFIG_REGULATOR
|
|
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix builds for nightly compiler users now that 'new_uninit' was
split into new features by using an alternative approach for the
code that used what is now called the 'box_uninit_write' feature
- Allow the 'stable_features' lint to preempt upcoming warnings about
them, since soon there will be unstable features that will become
stable in nightly compilers
- Export bss symbols too
'kernel' crate:
- 'block' module: fix wrong usage of lockdep API
'macros' crate:
- Provide correct provenance when constructing 'THIS_MODULE'
Documentation:
- Remove unintended indentation (blockquotes) in generated output
- Fix a couple typos
MAINTAINERS:
- Remove Wedson as Rust maintainer
- Update Andreas' email"
* tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: update Andreas Hindborg's email address
MAINTAINERS: Remove Wedson as Rust maintainer
rust: macros: provide correct provenance when constructing THIS_MODULE
rust: allow `stable_features` lint
docs: rust: remove unintended blockquote in Quick Start
rust: alloc: eschew `Box<MaybeUninit<T>>::write`
rust: kernel: fix typos in code comments
docs: rust: remove unintended blockquote in Coding Guidelines
rust: block: fix wrong usage of lockdep API
rust: kbuild: fix export of bss symbols
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix adding a new fgraph callback after function graph tracing has
already started.
If the new caller does not initialize its hash before registering the
fgraph_ops, it can cause a NULL pointer dereference. Fix this by
adding a new parameter to ftrace_graph_enable_direct() passing in the
newly added gops directly and not rely on using the fgraph_array[],
as entries in the fgraph_array[] must be initialized.
Assign the new gops to the fgraph_array[] after it goes through
ftrace_startup_subops() as that will properly initialize the
gops->ops and initialize its hashes.
- Fix a memory leak in fgraph storage memory test.
If the "multiple fgraph storage on a function" boot up selftest fails
in the registering of the function graph tracer, it will not free the
memory it allocated for the filter. Break the loop up into two where
it allocates the filters first and then registers the functions where
any errors will do the appropriate clean ups.
- Only clear the timerlat timers if it has an associated kthread.
In the rtla tool that uses timerlat, if it was killed just as it was
shutting down, the signals can free the kthread and the timer. But
the closing of the timerlat files could cause the hrtimer_cancel() to
be called on the already freed timer. As the kthread variable is is
set to NULL when the kthreads are stopped and the timers are freed it
can be used to know not to call hrtimer_cancel() on the timer if the
kthread variable is NULL.
- Use a cpumask to keep track of osnoise/timerlat kthreads
The timerlat tracer can use user space threads for its analysis. With
the killing of the rtla tool, the kernel can get confused between if
it is using a user space thread to analyze or one of its own kernel
threads. When this confusion happens, kthread_stop() can be called on
a user space thread and bad things happen. As the kernel threads are
per-cpu, a bitmask can be used to know when a kernel thread is used
or when a user space thread is used.
- Add missing interface_lock to osnoise/timerlat stop_kthread()
The stop_kthread() function in osnoise/timerlat clears the osnoise
kthread variable, and if it was a user space thread does a put_task
on it. But this can race with the closing of the timerlat files that
also does a put_task on the kthread, and if the race happens the task
will have put_task called on it twice and oops.
- Add cond_resched() to the tracing_iter_reset() loop.
The latency tracers keep writing to the ring buffer without resetting
when it issues a new "start" event (like interrupts being disabled).
When reading the buffer with an iterator, the tracing_iter_reset()
sets its pointer to that start event by walking through all the
events in the buffer until it gets to the time stamp of the start
event. In the case of a very large buffer, the loop that looks for
the start event has been reported taking a very long time with a non
preempt kernel that it can trigger a soft lock up warning. Add a
cond_resched() into that loop to make sure that doesn't happen.
- Use list_del_rcu() for eventfs ei->list variable
It was reported that running loops of creating and deleting kprobe
events could cause a crash due to the eventfs list iteration hitting
a LIST_POISON variable. This is because the list is protected by SRCU
but when an item is deleted from the list, it was using list_del()
which poisons the "next" pointer. This is what list_del_rcu() was to
prevent.
* tag 'trace-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()
tracing/timerlat: Only clear timer if a kthread exists
tracing/osnoise: Use a cpumask to know what threads are kthreads
eventfs: Use list_del_rcu() for SRCU protected list variable
tracing: Avoid possible softlockup in tracing_iter_reset()
tracing: Fix memory leak in fgraph storage selftest
tracing: fgraph: Fix to add new fgraph_ops to array after ftrace_startup_subops()
|
|
For optimized performance, firmware typically distributes EPC sections
evenly across different NUMA nodes. However, there are scenarios where
a node may have both CPUs and memory but no EPC section configured. For
example, in an 8-socket system with a Sub-Numa-Cluster=2 setup, there
are a total of 16 nodes. Given that the maximum number of supported EPC
sections is 8, it is simply not feasible to assign one EPC section to
each node. This configuration is not incorrect - SGX will still operate
correctly; it is just not optimized from a NUMA standpoint.
For this reason, log a message when a node with both CPUs and memory
lacks an EPC section. This will provide users with a hint as to why they
might be experiencing less-than-ideal performance when running SGX
enclaves.
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20240905080855.1699814-3-aaron.lu%40intel.com
|
