| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds a common function to check the status of IPSec devices.
This function will be useful for future implementations, such as IPSec ESN
and state offload callbacks.
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Pull an amd-pstate fix for 6.11 from Mario Limonciello:
"second round of amd-pstate fixes for 6.11:
* Fix an incorrect warning emitted on processors that don't
support X86_FEATURE_CPPC."
* tag 'amd-pstate-v6.11-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Remove warning for X86_FEATURE_CPPC on certain Zen models
|
|
There are only two callers of thermal_zone_device_is_enabled()
and one of them call is under the zone lock and the other one uses
lockdep_assert_held() on that lock. Thus the lockdep_assert_held()
in thermal_zone_device_is_enabled() is redundant and it could be
dropped, but then the function would merely become a wrapper around
a simple tz->mode check that is more convenient to do directly.
Accordingly, drop thermal_zone_device_is_enabled() altogether and update
its callers to check tz->mode directly as appropriate.
While at it, combine the tz->mode and tz->suspended checks in
__thermal_zone_device_update() because they are of a similar category
and if any of them evaluates to "true", the outcome is the same.
No intentinal functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9353673.CDJkKcVGEf@rjwysocki.net
|
|
The only case in which thermal_zone_device_set_polling() is called
with its second argument equal to zero is when passive cooling is
under way and passive_delay_jiffies is 0, which only happens when
the given thermal zone is not polled at all.
If monitor_thermal_zone() is modified to check passive_delay_jiffies
directly, the check of the thermal_zone_device_set_polling() second
argument against 0 can be dropped and a passive_delay check can be
dropped from thermal_zone_device_register_with_trips(), so change the
code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2004353.PYKUYFuaPT@rjwysocki.net
|
|
Since monitor_thermal_zone() is only called when the given thermal zone
has been enabled, as per the thermal_zone_device_is_enabled() check in
__thermal_zone_device_update(), the tz->mode check in it always
evaluates to "false" and the thermal_zone_device_set_polling()
invocation depending on it is dead code, so drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10547425.nUPlyArG6x@rjwysocki.net
|
|
Along the lines of commit 24aad192c671 ("thermal: core: Drop
redundant checks from thermal_bind_cdev_to_trip()") notice that
thermal_unbind_cdev_from_trip() is only called by
thermal_zone_cdev_unbind() under the thermal zone lock, so it
need not use lockdep_assert_held() for that lock.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3341369.44csPzL39Z@rjwysocki.net
|
|
If a cooling device is registered after a thermal zone it should be
bound to and the trip point it should be bound to has already been
crossed by the zone temperature on the way up, the cooling device's
state may need to be adjusted, but the Bang-bang governor will not
do that because its .manage() callback only looks at thermal instances
for trip points whose thresholds are below or at the zone temperature.
Address this by updating bang_bang_manage() to look at all of the
uninitialized thermal instances and setting their target states in
accordance with the position of the zone temperature with respect to
the threshold of the given trip point.
Fixes: 5f64b4a1ab1b ("thermal: gov_bang_bang: Add .manage() callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/6103874.lOV4Wx5bFT@rjwysocki.net
|
|
Add sanity checks for new trip temperature and hysteresis values to
trip_point_temp_store() and trip_point_hyst_store() to prevent trip
point threshold from falling below THERMAL_TEMP_INVALID.
However, still allow user space to pass THERMAL_TEMP_INVALID as the
new trip temperature value to invalidate the trip if necessary.
Also allow the hysteresis to be updated when the temperature is invalid
to allow user space to avoid having to adjust hysteresis after a valid
temperature has been set, but in that case just change the value and do
nothing else.
Fixes: be0a3600aa1e ("thermal: sysfs: Rework the handling of trip point updates")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/12528772.O9o76ZdvQC@rjwysocki.net
|
|
CAPT block (CPU Capture Buffer) have 7 sublocks: 0-3, 4, 6, 7.
Function 'vsc73xx_is_addr_valid' allows to use only block 0 at this
moment.
This patch fix it.
Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240903203340.1518789-1-paweldembicki@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In sch_cake, we keep track of the count of active bulk flows per host,
when running in dst/src host fairness mode, which is used as the
round-robin weight when iterating through flows. The count of active
bulk flows is updated whenever a flow changes state.
This has a peculiar interaction with the hash collision handling: when a
hash collision occurs (after the set-associative hashing), the state of
the hash bucket is simply updated to match the new packet that collided,
and if host fairness is enabled, that also means assigning new per-host
state to the flow. For this reason, the bulk flow counters of the
host(s) assigned to the flow are decremented, before new state is
assigned (and the counters, which may not belong to the same host
anymore, are incremented again).
Back when this code was introduced, the host fairness mode was always
enabled, so the decrement was unconditional. When the configuration
flags were introduced the *increment* was made conditional, but
the *decrement* was not. Which of course can lead to a spurious
decrement (and associated wrap-around to U16_MAX).
AFAICT, when host fairness is disabled, the decrement and wrap-around
happens as soon as a hash collision occurs (which is not that common in
itself, due to the set-associative hashing). However, in most cases this
is harmless, as the value is only used when host fairness mode is
enabled. So in order to trigger an array overflow, sch_cake has to first
be configured with host fairness disabled, and while running in this
mode, a hash collision has to occur to cause the overflow. Then, the
qdisc has to be reconfigured to enable host fairness, which leads to the
array out-of-bounds because the wrapped-around value is retained and
used as an array index. It seems that syzbot managed to trigger this,
which is quite impressive in its own right.
This patch fixes the issue by introducing the same conditional check on
decrement as is used on increment.
The original bug predates the upstreaming of cake, but the commit listed
in the Fixes tag touched that code, meaning that this patch won't apply
before that.
Fixes: 712639929912 ("sch_cake: Make the dual modes fairer")
Reported-by: syzbot+7fe7b81d602cc1e6b94d@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20240903160846.20909-1-toke@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The comment inaccurately describes what pipefs is - that is, a file
system.
Signed-off-by: Kienan Stewart <kstewart@efficios.com>
Link: https://lore.kernel.org/r/20240904-pipe-correct_imprecise_wording-v1-1-2b07843472c2@efficios.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Aleksa Sarai <cyphar@cyphar.com> says:
Now that we provide a unique 64-bit mount ID interface in statx(2), we
can now provide a race-free way for name_to_handle_at(2) to provide a
file handle and corresponding mount without needing to worry about
racing with /proc/mountinfo parsing or having to open a file just to do
statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and don't
care about an extra statx(2) call, users that pass full paths into
name_to_handle_at(2) need to know which mount the file handle comes from
(to make sure they don't try to open_by_handle_at a file handle from a
different filesystem) and switching to AT_EMPTY_PATH would require
allocating a file for every name_to_handle_at(2) call, turning
err = name_to_handle_at(-EBADF, "/foo/bar/baz", &handle, &mntid,
AT_HANDLE_MNT_ID_UNIQUE);
into
int fd = openat(-EBADF, "/foo/bar/baz", O_PATH | O_CLOEXEC);
err1 = name_to_handle_at(fd, "", &handle, &unused_mntid, AT_EMPTY_PATH);
err2 = statx(fd, "", AT_EMPTY_PATH, STATX_MNT_ID_UNIQUE, &statxbuf);
mntid = statxbuf.stx_mnt_id;
close(fd);
Also, this series adds a patch to clarify how AT_* flag allocation
should work going forwards.
* patches from https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-0-10c2c4c16708@cyphar.com:
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
Link: https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-0-10c2c4c16708@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that we provide a unique 64-bit mount ID interface in statx(2), we
can now provide a race-free way for name_to_handle_at(2) to provide a
file handle and corresponding mount without needing to worry about
racing with /proc/mountinfo parsing or having to open a file just to do
statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and don't
care about an extra statx(2) call, users that pass full paths into
name_to_handle_at(2) need to know which mount the file handle comes from
(to make sure they don't try to open_by_handle_at a file handle from a
different filesystem) and switching to AT_EMPTY_PATH would require
allocating a file for every name_to_handle_at(2) call, turning
err = name_to_handle_at(-EBADF, "/foo/bar/baz", &handle, &mntid,
AT_HANDLE_MNT_ID_UNIQUE);
into
int fd = openat(-EBADF, "/foo/bar/baz", O_PATH | O_CLOEXEC);
err1 = name_to_handle_at(fd, "", &handle, &unused_mntid, AT_EMPTY_PATH);
err2 = statx(fd, "", AT_EMPTY_PATH, STATX_MNT_ID_UNIQUE, &statxbuf);
mntid = statxbuf.stx_mnt_id;
close(fd);
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-2-10c2c4c16708@cyphar.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unfortunately, the way we have gone about adding new AT_* flags has
been a little messy. In the beginning, all of the AT_* flags had generic
meanings and so it made sense to share the flag bits indiscriminately.
However, we inevitably ran into syscalls that needed their own
syscall-specific flags. Due to the lack of a planned out policy, we
ended up with the following situations:
* Existing syscalls adding new features tended to use new AT_* bits,
with some effort taken to try to re-use bits for flags that were so
obviously syscall specific that they only make sense for a single
syscall (such as the AT_EACCESS/AT_REMOVEDIR/AT_HANDLE_FID triplet).
Given the constraints of bitflags, this works well in practice, but
ideally (to avoid future confusion) we would plan ahead and define a
set of "per-syscall bits" ahead of time so that when allocating new
bits we don't end up with a complete mish-mash of which bits are
supposed to be per-syscall and which aren't.
* New syscalls dealt with this in several ways:
- Some syscalls (like renameat2(2), move_mount(2), fsopen(2), and
fspick(2)) created their separate own flag spaces that have no
overlap with the AT_* flags. Most of these ended up allocating
their bits sequentually.
In the case of move_mount(2) and fspick(2), several flags have
identical meanings to AT_* flags but were allocated in their own
flag space.
This makes sense for syscalls that will never share AT_* flags, but
for some syscalls this leads to duplication with AT_* flags in a
way that could cause confusion (if renameat2(2) grew a
RENAME_EMPTY_PATH it seems likely that users could mistake it for
AT_EMPTY_PATH since it is an *at(2) syscall).
- Some syscalls unfortunately ended up both creating their own flag
space while also using bits from other flag spaces. The most
obvious example is open_tree(2), where the standard usage ends up
using flags from *THREE* separate flag spaces:
open_tree(AT_FDCWD, "/foo", OPEN_TREE_CLONE|O_CLOEXEC|AT_RECURSIVE);
(Note that O_CLOEXEC is also platform-specific, so several future
OPEN_TREE_* bits are also made unusable in one fell swoop.)
It's not entirely clear to me what the "right" choice is for new
syscalls. Just saying that all future VFS syscalls should use AT_* flags
doesn't seem practical. openat2(2) has RESOLVE_* flags (many of which
don't make much sense to burn generic AT_* flags for) and move_mount(2)
has separate AT_*-like flags for both the source and target so separate
flags are needed anyway (though it seems possible that renameat2(2)
could grow *_EMPTY_PATH flags at some point, and it's a bit of a shame
they can't be reused).
But at least for syscalls that _do_ choose to use AT_* flags, we should
explicitly state the policy that 0x2ff is currently intended for
per-syscall flags and that new flags should err on the side of
overlapping with existing flag bits (so we can extend the scope of
generic flags in the future if necessary).
And add AT_* aliases for the RENAME_* flags to further cement that
renameat2(2) is an *at(2) flag, just with its own per-syscall flags.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-1-10c2c4c16708@cyphar.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
A number of pin fixes for Puma, Rock-Pi-E and rk356x, and as it turns
out the VO0 and VO1 general register files are not identical as suggested
by their original compatible. As there are no users of those yet,
everybody agreed that we should fix the compatibles.
* tag 'v6.11-rockchip-dtsfixes' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Link: https://lore.kernel.org/r/7602696.A5hrfCrGMc@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One more Qualcomm driver fix for v6.11
This resolves a deadlock in the Qualcomm uefisecapp driver following the
attempt to acquire global context is acquired in the case the device
isn't probed.
* tag 'qcom-drivers-fixes-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
Link: https://lore.kernel.org/r/20240904145214.4089-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When the SRSO mitigation is disabled, either via mitigations=off or
spec_rstack_overflow=off, the warning about the lack of IBPB-enhancing
microcode is printed anyway.
This is unnecessary since the user has turned off the mitigation.
[ bp: Massage, drop SBPB rationale as it doesn't matter because when
mitigations are disabled x86_pred_cmd is not being used anyway. ]
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240904150711.193022-1-david.kaplan@amd.com
|
|
Minimize access to the RX descriptor by collecting all the flags in a
local variable and then updating the descriptor at once.
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Link: https://patch.msgid.link/20240831011114.2065912-1-ende.tan@starfivetech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The pwm devices for a pwm_chip are numbered starting at 0, the first hw
channel however has the number 1. While introducing a parametrised macro
to simplify register bit usage and making that offset explicit, one of
the usages was converted wrongly. This is fixed here.
Fixes: 7cea05ae1d4e ("pwm-stm32: Make use of parametrised register definitions")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240905090627.197536-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Deferred I/O requires struct page for framebuffer memory, which is
not guaranteed for all DMA ranges. We thus only install deferred I/O
if we have a framebuffer that requires it.
A reported bug affected the ipu-v3 and pl111 drivers, which have video
memory in either Normal or HighMem zones
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff]
[ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff]
where deferred I/O only works correctly with HighMem. See the Closes
tags for bug reports.
v2:
- test if screen_buffer supports deferred I/O (Sima)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 808a40b69468 ("drm/fbdev-dma: Implement damage handling and deferred I/O")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/all/23636953.6Emhk5qWAg@steina-w/
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Closes: https://lore.kernel.org/dri-devel/CACRpkdb+hb9AGavbWpY-=uQQ0apY9en_tWJioPKf_fAbXMP4Hg@mail.gmail.com/
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904123750.31206-1-tzimmermann@suse.de
|
|
Use bh-disabling spinlocks when accessing rreq->lock because, in the
future, it may be twiddled from softirq context when cleanup is driven from
cache backend DIO completion.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-12-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Set the work function in the netfs_io_request work_struct when we allocate
the request rather than doing this later. This reduces the number of
places we need to set it in future code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-11-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove NETFS_COPY_TO_CACHE as it isn't used anymore.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-10-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Reserve the 0-valued netfs_sreq_source to mean unset or unknown so that it
can be seen in the trace as such rather than appearing as
download-from-server when it's going to get switched to something else.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-9-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move max_len/max_nr_segs from struct netfs_io_subrequest to struct
netfs_io_stream as we only issue one subreq at a time and then don't need
these values again for that subreq unless and until we have to retry it -
in which case we want to renegotiate them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-8-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move CIFS_INO_MODIFIED_ATTR to netfs_inode as NETFS_ICTX_MODIFIED_ATTR and
then make netfs_perform_write() set it. This means that cifs doesn't need
to implement the ->post_modify() hook.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-7-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Reduce the number of conditional branches in netfs_perform_write() by
merging in netfs_how_to_modify() and then creating a separate if-statement
for each way we might modify a folio. Note that this means replicating the
data copy in each path.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-6-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Record statistics for contention upon the writeback serialisation lock that
prevents racing writeback calls from causing each other to interleave their
writebacks. These can be viewed in /proc/fs/netfs/stats on the WbLock line,
with skip=N indicating the number of non-SYNC writebacks skipped and wait=N
indicating the number of SYNC writebacks that waited.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-5-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Adjust the labels in /proc/fs/netfs/stats that refer to netfs-specific
counters. These currently all begin with "Netfs", but change them to begin
with more specific labels.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-4-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unlike other vfs_xxxx() calls, vfs_setxattr() and vfs_removexattr() don't
take the sb_writers lock, so the caller should do it for them.
Fix cachefiles to do this.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Gao Xiang <xiang@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-3-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Document what was discussed multiple times on list and various
virtual / in-person conversations. guard() being okay in functions
<= 20 LoC is a bit of my own invention. If the function is trivial
it should be fine, but feel free to disagree :)
We'll obviously revisit this guidance as time passes and we and other
subsystems get more experience.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240830171443.3532077-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Moorefield and Lightning Mountain Atom processors are
missing the NO_SSB flag in the vulnerabilities whitelist.
This will cause unaffected parts to incorrectly be reported
as vulnerable. Add the missing flag.
These parts are currently out of service and were verified
internally with archived documentation that they need the
NO_SSB flag.
Closes: https://lore.kernel.org/lkml/CAEJ9NQdhh+4GxrtG1DuYgqYhvc0hi-sKZh-2niukJ-MyFLntAA@mail.gmail.com/
Reported-by: Shanavas.K.S <shanavasks@gmail.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240829192437.4074196-1-daniel.sneddon@linux.intel.com
|
|
In the off-chance that waiting for the firmware to signal its booted status
timed out in the fast reset path, one must flush the cache lines for the
entire FW VM address space before reloading the regions, otherwise stale
values eventually lead to a scheduler job timeout.
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902130237.3440720-1-adrian.larumbe@collabora.com
|
|
As per the previous dt-binding commit, update the WL-355608-A8 panel
compatible to reflect the the integrating device vendor and name as the
panel OEM is unknown.
Fixes: 62ea2eeba7bf ("drm: panel: nv3052c: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-3-ryan@testtoast.com
|
|
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM used in a number of handheld gaming devices made by Anbernic.
Previously committed using the OEM serial without a vendor prefix,
however following subsequent discussion the preference is to use the
integrating device vendor and name where the OEM is unknown.
There are 4 RG35XX series devices from Anbernic based on an Allwinner
H700 SoC using this panel, with the -Plus variant introduced first.
Therefore the -Plus is used as the fallback for the subsequent -H,
-2024, and -SP devices.
Alter the filename and compatible string to reflect the convention.
Fixes: 45b888a8980a ("dt-bindings: display: panel: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-2-ryan@testtoast.com
|
|
We were allowing any users to create a high priority group without any
permission checks. As a result, this was allowing possible denial of
service.
We now only allow the DRM master or users with the CAP_SYS_NICE
capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM.
As the sole user of that uAPI lives in Mesa and hardcode a value of
MEDIUM [1], this should be safe to do.
Additionally, as those checks are performed at the ioctl level,
panthor_group_create now only check for priority level validity.
[1]https://gitlab.freedesktop.org/mesa/mesa/-/blob/f390835074bdf162a63deb0311d1a6de527f9f89/src/gallium/drivers/panfrost/pan_csf.c#L1038
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Cc: stable@vger.kernel.org
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903144955.144278-2-mary.guillemard@collabora.com
|
|
rm .*.cmd when make clean
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240902042103.5867-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240902042103.5867-1-zhangjiao2@cmss.chinamobile.com>
|
|
commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when
CPUs go online/offline") introduces a new cpuhp state for hyperv
initialization.
cpuhp_setup_state() returns the state number if state is
CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states.
For the hyperv case, since a new cpuhp state was introduced it would
return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call
is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and
so hv_cpu_die() won't be called on all CPUs. This means the VP assist page
won't be reset. When the kexec kernel tries to setup the VP assist page
again, the hypervisor corrupts the memory region of the old VP assist page
causing a panic in case the kexec kernel is using that memory elsewhere.
This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec
panic/hang issues").
Get rid of hyperv_init_cpuhp entirely since we are no longer using a
dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with
cpuhp_remove_state().
Cc: stable@vger.kernel.org
Fixes: 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline")
Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240828112158.3538342-1-anirudh@anirudhrb.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240828112158.3538342-1-anirudh@anirudhrb.com>
|
|
Because the loop-expression will do one more time before getting false from
cond-expression, the original code copied one more entry size beyond valid
region.
Fix it by moving the entry copy to loop-body.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240902015803.20420-1-pkshih@realtek.com
|
|
To get more accurate RSSI, this commit includes frequency domain RSSI
info in RSSI calculation. Add correspond physts parsing and macro to
get frequency domain RSSI information for supported IC.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240828055217.10263-3-pkshih@realtek.com
|
|
Use RSSI without subtracting offset as packet detection lower bound and
set an absolute minimal threshold. It's equivalent to setting a higher
noise floor, thereby reducing false alarm and improving interference
endurance.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240828055217.10263-2-pkshih@realtek.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ice: fix synchronization between .ndo_bpf() and reset
Larysa Zaremba says:
PF reset can be triggered asynchronously, by tx_timeout or by a user. With some
unfortunate timings both ice_vsi_rebuild() and .ndo_bpf will try to access and
modify XDP rings at the same time, causing system crash.
The first patch factors out rtnl-locked code from VSI rebuild code to avoid
deadlock. The following changes lock rebuild and .ndo_bpf() critical sections
with an internal mutex as well and provide complementary fixes.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
ice: check ICE_VSI_DOWN under rtnl_lock when preparing for reset
ice: check for XDP rings instead of bpf program when unconfiguring
ice: protect XDP configuration with a mutex
ice: move netif_queue_set_napi to rtnl-protected sections
====================
Link: https://patch.msgid.link/20240903183034.3530411-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.11
Hopefully final fixes for v6.11 and this time only fixes to ath11k
driver. We need to revert hibernation support due to reported
regressions and we have a fix for kernel crash introduced in
v6.11-rc1.
* tag 'wireless-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: cw1200: add net-cw1200.h
Revert "wifi: ath11k: support hibernation"
Revert "wifi: ath11k: restore country code during resume"
wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power()
====================
Link: https://patch.msgid.link/20240904135906.5986EC4CECA@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This NIC doesn't have hardware IRQ coalescing. Under high load,
interrupts can adversely affect performance. To mitigate this, enable
software IRQ coalescing by default. On my system this increases receive
throughput with iperf3 from 853 MBit/sec to 934 MBit/s, decreases
interrupts from 69489/sec to 2016/sec, and decreases CPU utilization
from 27% (4x Cortex-A53) to 14%. Latency is not affected (as far as I
can tell).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240903184912.4151926-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
axienet_dma_err_handler can race with axienet_stop in the following
manner:
CPU 1 CPU 2
====================== ==================
axienet_stop()
napi_disable()
axienet_dma_stop()
axienet_dma_err_handler()
napi_disable()
axienet_dma_stop()
axienet_dma_start()
napi_enable()
cancel_work_sync()
free_irq()
Fix this by setting a flag in axienet_stop telling
axienet_dma_err_handler not to bother doing anything. I chose not to use
disable_work_sync to allow for easier backporting.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When reading registers from the PHY using the SIOCGMIIREG IOCTL any
errors returned from either mdiobus_read() or mdiobus_c45_read() are
ignored, and parts of the returned error is passed as the register value
back to user-space.
For example, if mdiobus_c45_read() is used with a bus that do not
implement the read_c45() callback -EOPNOTSUPP is returned. This is
however directly stored in mii_data->val_out and returned as the
registers content. As val_out is a u16 the error code is truncated and
returned as a plausible register value.
Fix this by first checking the return value for errors before returning
it as the register content.
Before this patch,
# phytool read eth0/0:1/0
0xffa1
After this change,
$ phytool read eth0/0:1/0
error: phy_read (-95)
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20240903171536.628930-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the debugfs_create_dir() never returns a null pointer, checking
the return value for a null pointer is redundant, and using IS_ERR is
safe enough.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://patch.msgid.link/20240903143343.2004652-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the debugfs_create_dir() never returns a null pointer, checking
the return value for a null pointer is redundant, and using IS_ERR is
safe enough.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://patch.msgid.link/20240903143149.2004530-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
Unmask upper DSCP bits - part 3
tl;dr - This patchset continues to unmask the upper DSCP bits in the
IPv4 flow key in preparation for allowing IPv4 FIB rules to match on
DSCP. No functional changes are expected.
The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB
lookup to match against the TOS selector in FIB rules and routes.
It is currently impossible for user space to configure FIB rules that
match on the DSCP value as the upper DSCP bits are either masked in the
various call sites that initialize the IPv4 flow key or along the path
to the FIB core.
In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we
need to make sure the entire DSCP value is present in the IPv4 flow key.
This patchset continues to unmask the upper DSCP bits, but this time in
the output route path, specifically in the callers of
ip_route_output_ports().
The next patchset (last) will handle the callers of
ip_route_output_key(). Split from this patchset to avoid going over the
15 patches limit.
No functional changes are expected as commit 1fa3314c14c6 ("ipv4:
Centralize TOS matching") moved the masking of the upper DSCP bits to
the core where 'flowi4_tos' is matched against the TOS selector.
====================
Link: https://patch.msgid.link/20240903135327.2810535-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
