summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-17net/mlx5e: IPoIB, Underlay QPSaeed Mahameed
Create IPoIB underlay QP needed by the IPoIB netdevice profile for RSS and TX HW context to perform on IPoIB traffic. Reset the underlay QP on dev_uninit ndo to stop IPoIB traffic going through this QP when the ULP IPoIB decides to cleanup. Implement attach/detach mcast RDMA netdev callbacks for later RDMA netdev use. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Basic netdev ndos open/closeSaeed Mahameed
Implement open/close of IPoIB netdevice ndos using mlx5e's channels API to manage data path resources (RQs/SQs/CQs). Set IPoIB netdev address on dev_init ndo. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, TX TIS creationSaeed Mahameed
Modify mlx5e tis creation function to accept underlay qp number, which will be needed by IPoIB. Implement mlx5i (IPoIB) tx init/cleanup netdevice profile flows to create one TIS with the IPoIB underlay qp, for IPoIB TX SQs. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RSS flow steering tablesSaeed Mahameed
Like the mlx5e ethernet mode, on IPoIB mode we need to create RX steering tables, but IPoIB do not require MAC and VLAN steering tables so the only tables we create in here are: 1. TTC Table (Traffic Type Classifier table for RSS steering) 2. ARFS Table (for accelerated RFS support) Creation of those tables is identical to mlx5e ethernet mode, hence the use of mlx5e_create_ttc_table and mlx5e_arfs_create_tables. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RX steering RSS RQTs and TIRsSaeed Mahameed
Implement IPoIB RX RSS (RQTs and TIRs) HW objects creation, All we do here is simply reuse the mlx5e implementation to create direct and indirect (RSS) steering HW objects. For that we just expose mlx5e_{create,destroy}_{direct,indirect}_{rqt,tir} functions into en.h and call them from ipoib.c in init/cleanup_rx IPoIB netdevice profile callbacks. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Add netdevice profile skeletonSaeed Mahameed
Create mlx5e IPoIB netdevice profile skeleton in the new ipoib.c file with empty implementation. Downstream patches will provide the full mlx5 rdma netdevice acceleration support for IPoIB into this new file, by using the mlx5e netdevice profile and new mlx5_channels APIs and infrastructures. Same as already done in mlx5e NIC netdevice and switchdev mode VF representors. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: More generic netdev management APISaeed Mahameed
In preparation for mlx5e RDMA net_device support, here we generalize mlx5e_attach/detach in a way that those functions will be agnostic to link type. For that we move ethernet specific NIC net device logic out of those functions into {nic,rep}_{enable/disable} mlx5e NIC and representor profiles callbacks. Also some of the logic was moved only to NIC profile since it is not right to have this logic for representor net device (e.g. set port MTU). Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5: Enable flow-steering for IB linkErez Shitrit
Get the relevant capabilities if supports ipoib_enhanced_offloads and init the flow steering table accordingly. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5: Refactor create flow table method to accept underlay QPErez Shitrit
IB flow tables need the underlay qp to perform flow steering. Here we change the API of the flow tables creation to accept the underlay QP number as a parameter in order to support IB (IPoIB) flow steering. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5: Add IPoIB enhanced offloads bits to mlx5_ifcErez Shitrit
New capability bit: ipoib_enhanced_offloads, indicates new ability for UD QP to do RSS and enhanced IPoIB offloads and acceleration. Add underlay_qpn to the TIS and flow_table objects In order to support SET_ROOT command, to connect between IPoIB QPs and flow steering tables. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17hv_netvsc: Exclude non-TCP port numbers from vRSS hashingHaiyang Zhang
Azure hosts are not supporting non-TCP port numbers in vRSS hashing for now. For example, UDP packet loss rate will be high if port numbers are also included in vRSS hash. So, we created this patch to use only IP numbers for hashing in non-TCP traffic. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17hv_netvsc: Fix the queue index computation in forwarding caseHaiyang Zhang
If the outgoing skb has a RX queue mapping available, we use the queue number directly, other than put it through Send Indirection Table. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: dsa: isolate legacy codeVivien Didelot
This patch moves as is the legacy DSA code from dsa.c to legacy.c, except the few shared symbols which remain in dsa.c. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17sfc: limit the number of receive queuesBert Kenward
The number of rx queues is determined by the rss_cpus parameter or the cpu topology. If that is higher than EFX_MAX_RX_QUEUES the driver can corrupt state. Fixes: 8ceee660aacb ("New driver "sfc" for Solarstorm SFC4000 controller.") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17x86/kbuild: Use cc-option to enable -falign-{jumps/loops}Matthias Kaehlcke
clang currently does not support these optimizations, only enable them when they are available. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Cc: Greg Hackmann <ghackmann@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Davidson <md@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: grundler@chromium.org Link: http://lkml.kernel.org/r/20170413172609.118122-1-mka@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-17efi/libstub/arm: Don't use TASK_SIZE when randomizing the RT spaceArd Biesheuvel
As reported by James, Catalin and Mark, commit: e69176d68d26 ("ef/libstub/arm/arm64: Randomize the base of the UEFI rt services region") ... results in a crash in the firmware, regardless of whether KASLR is in effect or not and whether the firmware implements EFI_RNG_PROTOCOL or not. Mark has identified the root cause to be the inappropriate use of TASK_SIZE in the stub, which arm64 defines as: #define TASK_SIZE (test_thread_flag(TIF_32BIT) ? \ TASK_SIZE_32 : TASK_SIZE_64) and testing thread flags at this point results in the dereference of pointers in uninitialized structures. So instead, introduce a preprocessor symbol EFI_RT_VIRTUAL_LIMIT and define it to TASK_SIZE_64 on arm64 and TASK_SIZE on ARM, both of which are compile time constants. Also, change the 'headroom' variable to static const to force an error if this might change in the future. Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: James Morse <james.morse@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20170417093201.10181-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-17Merge branch 'clockevents/4.12' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clockevents updates from Daniel Lezcano - Provide a framework to handle errata gracefuly for arm_arch_timer (Mark Zyngier) - Clarify the DT properties for the rockchip timer and add the clocksource as an alternative to the bogus architected timer (Alexander Kochetkov) - Rename the Gemini timer to Faraday timer fttmr010 and provide a specific initialization for Gemini (Linus Walleij) - Add missing newlines in the error message in the timers (Rafał Miłecki) - Read the clock once and implement the delay timer on Orion (Russell King)
2017-04-17x86/intel_rdt: Get rid of anon unionThomas Gleixner
gcc-4.4.3 fails to statically initialize members of a anon union. See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676 The storage saving is not really worth it and aside of that it will catch usage of the cache member for bandwidth and vice versa easier. Fixes: 05b93417ce5b ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-17Merge tag 'perf-core-for-mingo-4.12-20170413' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes Arnaldo Carvalho de Melo: User visible changes: - Fix 'perf stat' bug in handling events in error state (Stephane Eranian) Documentation changes: - Add usage of --no-syscalls in 'perf trace' man page (Ravi Bangoria) Infrastructure changes: - Pass PYTHON config to feature detection (David Carrillo-Cisneros) - Disable JVMTI if no ELF support available (David Carrillo-Cisneros) - Fix feature detection redefinion of build flags (David Carrillo-Cisneros) - Hint missing file when tool tips fail to load (David Carrillo-Cisneros) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-17Merge branch 'intel_pstate' into pm-cpufreq-schedRafael J. Wysocki
2017-04-17nfc: fix get_unaligned_...() misusesAl Viro
* if a local variable of type uint16_t is unaligned, your compiler is FUBAR * the whole point of get_unaligned_... is to avoid memcpy + ..._to_cpu(). Using it *after* memcpy() (into aligned object, no less) is pointless. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-17NFC: pn533: use constant off-stack buffer for sending acksMichał Mirosław
fix for WARN: usb 3-2.4.1: NFC: Exchanging data failed (error 0x13) llcp: nfc_llcp_recv: err -5 llcp: nfc_llcp_symm_timer: SYMM timeout ------------[ cut here ]------------ WARNING: CPU: 1 PID: 26397 at .../drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x370/0x550 transfer buffer not dma capable [...] Workqueue: events nfc_llcp_timeout_work [nfc] Call Trace: ? dump_stack+0x46/0x5a ? __warn+0xb9/0xe0 ? warn_slowpath_fmt+0x5a/0x80 ? usb_hcd_map_urb_for_dma+0x370/0x550 ? usb_hcd_submit_urb+0x2fb/0xa60 ? dequeue_entity+0x3f2/0xc30 ? pn533_usb_send_ack+0x5d/0x80 [pn533_usb] ? pn533_usb_abort_cmd+0x13/0x20 [pn533_usb] ? pn533_dep_link_down+0x32/0x70 [pn533] ? nfc_dep_link_down+0x87/0xd0 [nfc] [...] usb 3-2.4.1: NFC: Exchanging data failed (error 0x13) llcp: nfc_llcp_recv: err -5 llcp: nfc_llcp_symm_timer: SYMM timeout Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-16livepatch: add missing printk newlinesJosh Poimboeuf
Add missing newlines to some pr_err() strings. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Jessica Yu <jeyu@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-16Linux 4.11-rc7Linus Torvalds
2017-04-16Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Again, a batch that's been sitting a couple of weeks, mostly because I anticipated a bit more material but it didn't show up -- which is good. These are all your garden variety fixes for ARM platforms. The most visible issue fixed here is probably the SMP reset issue on OMAP, the rest are minor stuff" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: allwinner: a64: add pmu0 regs for USB PHY ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer reset: add exported __reset_control_get, return NULL if optional ARM: orion5x: only call into phylib when available ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend ARM: dts: ti: fix PCI bus dtc warnings ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY ARM: dts: OMAP3: Fix MFG ID EEPROM ARM: sun8i: a33: add operating-points-v2 property to all nodes ARM: sun8i: a33: remove highest OPP to fix CPU crashes
2017-04-16Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Four small fixes. Three of them fix the same error in NVMe, in loop, fc, and rdma respectively. The last fix from Ming fixes a regression in this series, where our bvec gap logic was wrong and causes an oops on NVMe for certain conditions" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix bio_will_gap() for first bvec with offset nvme-fc: Fix sqsize wrong assignment based on ctrl MQES capability nvme-rdma: Fix sqsize wrong assignment based on ctrl MQES capability nvme-loop: Fix sqsize wrong assignment based on ctrl MQES capability
2017-04-16Merge tag 'omap-for-v4.11/fixes-rc6-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Regression fix for omap interconnect code for deferred probe. Without this fix we can get PM related warnings for devices that use deferred probe. If necessary, this fix can wait for the v4.12 merge window no problem. * tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend ARM: dts: ti: fix PCI bus dtc warnings ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY ARM: dts: OMAP3: Fix MFG ID EEPROM Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-16Merge branch 'for-4.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "Unfortunately, the commit to fix the cgroup mount race in the previous pull request can lead to hangs. The original bug has been around for a while and isn't too likely to be triggered in usual use cases. Revert the commit for now" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Revert "cgroup: avoid attaching a cgroup root to two different superblocks"
2017-04-16Merge tag 'tty-4.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fix from Greg KH: "Here is a single tty core revert for a patch that was reported to cause problems. The original issue is one that we have lived with for decades, so trying to scramble to fix the fix in time for 4.11-final does not make sense due to the fragility of the tty ldisc layer. Just reverting it makes sense for now" * tag 'tty-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: don't panic on OOM in tty_set_ldisc()"
2017-04-16Merge tag 'trace-v4.11-rc5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "While rewriting the function probe code, I stumbled over a long standing bug. This bug has been there sinc function tracing was added way back when. But my new development depends on this bug being fixed, and it should be fixed regardless as it causes ftrace to disable itself when triggered, and a reboot is required to enable it again. The bug is that the function probe does not disable itself properly if there's another probe of its type still enabled. For example: # cd /sys/kernel/debug/tracing # echo schedule:traceoff > set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter The above registers two traceoff probes (one for schedule and one for do_IRQ, and then removes do_IRQ. But since there still exists one for schedule, it is not done properly. When adding do_IRQ back, the breakage in the accounting is noticed by the ftrace self tests, and it causes a warning and disables ftrace" * tag 'trace-v4.11-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix removing of second function probe
2017-04-16lightnvm: fix some error code in pblk-init.cDan Carpenter
There were a bunch of places in pblk_lines_init() where we didn't set an error code. And in pblk_writer_init() we accidentally return 1 instead of a correct error code, which would result in a Oops later. Fixes: 11a5d6fdf919 ("lightnvm: physical block device (pblk) target") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: fix some WARN() messagesDan Carpenter
WARN_ON() takes a condition, not an error message. I slightly tweaked some conditions so hopefully it's more clear. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: pblk-gc: fix an error pointer dereference in initDan Carpenter
These labels are reversed so we could end up dereferencing an error pointer or leaking. Fixes: 7f347ba6bb3a ("lightnvm: physical block device (pblk) target") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: physical block device (pblk) targetJavier González
This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: convert sprintf into strlcpyJavier González
Convert sprintf calls to strlcpy in order to make possible buffer overflow more obvious. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: fix type checks on rrpcJavier González
sector_t is always unsigned, therefore avoid < 0 checks on it. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: clean unused variableJavier González
Clean unused variable on lightnvm core. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: make nvm_free staticJavier González
Prefix the nvm_free static function with a missing static keyword. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: allow to init targets on factory modeJavier González
Target initialization has two responsibilities: creating the target partition and instantiating the target. This patch enables to create a factory partition (e.g., do not trigger recovery on the given target). This is useful for target development and for being able to restore the device state at any moment in time without requiring a full-device erase. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: bad type conversion for nvme control bitsJavier González
The NVMe I/O command control bits are 16 bytes, but is interpreted as 32 bytes in the lightnvm user I/O data path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: fix cleanup order of disk on init errorJavier González
Reorder disk allocation such that the disk structure can be put safely. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: double-clear of dev->lun_map on target init errorJavier González
The dev->lun_map bits are cleared twice if an target init error occurs. First in the target clean routine, and then next in the nvm_tgt_create error function. Make sure that it is only cleared once by extending nvm_remove_tgt_devi() with a clear bit, such that clearing of bits can ignored when cleaning up a successful initialized target. Signed-off-by: Javier González <javier@cnexlabs.com> Fix style. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: don't check for failure from mempool_alloc()NeilBrown
mempool_alloc() cannot fail if the gfp flags allow it to sleep, and both GFP_KERNEL and GFP_NOIO allows for sleeping. So rrpc_move_valid_pages() and rrpc_make_rq() don't need to test the return value. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: enable nvme size compile assertsMatias Bjørling
The asserts in _nvme_nvm_check_size are not compiled due to the function not begin called. Make sure that it is called, and also fix the wrong sizes of asserts for nvme_nvm_addr_format, and nvme_nvm_bb_tbl, which checked for number of bits instead of bytes. Reported-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: free reverse device mapJavier González
Free the reverse mapping table correctly on target tear down Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: rename scrambler controller hintJavier González
According to the OCSSD 1.2 specification, the 0x200 hint enables the media scrambler for the read/write opcode, providing that the controller has been correctly configured by the firmware. Rename the macro to represent this meaning. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: submit erases using the I/O pathJavier González
Until now erases have been submitted as synchronous commands through a dedicated erase function. In order to enable targets implementing asynchronous erases, refactor the erase path so that it uses the normal async I/O submission functions. If a target requires sync I/O, it can implement it internally. Also, adapt rrpc to use the new erase path. Signed-off-by: Javier González <javier@cnexlabs.com> Fixed spelling error. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16nvme/lightnvm: Prevent small buffer overflow in nvme_nvm_identifyScott Bauer
There are two closely named structs in lightnvm: struct nvme_nvm_addr_format and struct nvme_addr_format. The first struct has 4 reserved bytes at the end, the second does not. (gdb) p sizeof(struct nvme_nvm_addr_format) $1 = 16 (gdb) p sizeof(struct nvm_addr_format) $2 = 12 In the nvme_nvm_identify function we memcpy from the larger struct to the smaller struct. We incorrectly pass the length of the larger struct and overflow by 4 bytes, lets not do that. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: Fix error handlingChristophe JAILLET
According to error handling in this function, it is likely that going to 'out' was expected here. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16Revert "cgroup: avoid attaching a cgroup root to two different superblocks"Tejun Heo
This reverts commit bfb0b80db5f9dca5ac0a5fd0edb765ee555e5a8e. Andrei reports CRIU test hangs with the patch applied. The bug fixed by the patch isn't too likely to trigger in actual uses. Revert the patch for now. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Andrei Vagin <avagin@virtuozzo.com> Link: http://lkml.kernel.org/r/20170414232737.GC20350@outlook.office365.com
generated by cgit (git 2.34.1) at 2025-09-22 19:46:56 +0000