| Age | Commit message (Collapse) | Author |
|---|
|
Hangbin Liu says:
====================
fix dev null pointer dereference when send packets larger than mtu in collect_md mode
When we send a packet larger than PMTU, we need to reply with
icmp_send(ICMP_FRAG_NEEDED) or icmpv6_send(ICMPV6_PKT_TOOBIG).
But with collect_md mode, kernel will crash while accessing the dst dev
as __metadata_dst_init() init dst->dev to NULL by default. Here is what
the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv4
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmp_send
- net = dev_net(rt->dst.dev); <-- here
- ip6gre_xmit_ipv6
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmpv6_send
...
- decode_session4
- oif = skb_dst(skb)->dev->ifindex; <-- here
- decode_session6
- oif = skb_dst(skb)->dev->ifindex; <-- here
We could not fix it in __metadata_dst_init() as there is no dev supplied.
Look in to the __icmp_send()/decode_session{4,6} code we could find the dst
dev is actually not needed. In __icmp_send(), we could get the net by skb->dev.
For decode_session{4,6}, as it was called by xfrm_decode_session_reverse()
in this scenario, the oif is not used by
fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
The reproducer is easy:
ovs-vsctl add-br br0
ip link set br0 up
ovs-vsctl add-port br0 gre0 -- set interface gre0 type=gre options:remote_ip=$dst_addr
ip link set gre0 up
ip addr add ${local_gre6}/64 dev br0
ping6 $remote_gre6 -s 1500
The kernel will crash like
[40595.821651] BUG: kernel NULL pointer dereference, address: 0000000000000108
[40595.822411] #PF: supervisor read access in kernel mode
[40595.822949] #PF: error_code(0x0000) - not-present page
[40595.823492] PGD 0 P4D 0
[40595.823767] Oops: 0000 [#1] SMP PTI
[40595.824139] CPU: 0 PID: 2831 Comm: handler12 Not tainted 5.2.0 #57
[40595.824788] Hardware name: Red Hat KVM, BIOS 1.11.1-3.module+el8.1.0+2983+b2ae9c0a 04/01/2014
[40595.825680] RIP: 0010:__xfrm_decode_session+0x6b/0x930
[40595.826219] Code: b7 c0 00 00 00 b8 06 00 00 00 66 85 d2 0f b7 ca 48 0f 45 c1 44 0f b6 2c 06 48 8b 47 58 48 83 e0 fe 0f 84 f4 04 00 00 48 8b 00 <44> 8b 80 08 01 00 00 41 f6 c4 01 4c 89 e7
ba 58 00 00 00 0f 85 47
[40595.828155] RSP: 0018:ffffc90000a73438 EFLAGS: 00010286
[40595.828705] RAX: 0000000000000000 RBX: ffff8881329d7100 RCX: 0000000000000000
[40595.829450] RDX: 0000000000000000 RSI: ffff8881339e70ce RDI: ffff8881329d7100
[40595.830191] RBP: ffffc90000a73470 R08: 0000000000000000 R09: 000000000000000a
[40595.830936] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a73490
[40595.831682] R13: 000000000000002c R14: ffff888132ff1301 R15: ffff8881329d7100
[40595.832427] FS: 00007f5bfcfd6700(0000) GS:ffff88813ba00000(0000) knlGS:0000000000000000
[40595.833266] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[40595.833883] CR2: 0000000000000108 CR3: 000000013a368000 CR4: 00000000000006f0
[40595.834633] Call Trace:
[40595.835392] ? rt6_multipath_hash+0x4c/0x390
[40595.835853] icmpv6_route_lookup+0xcb/0x1d0
[40595.836296] ? icmpv6_xrlim_allow+0x3e/0x140
[40595.836751] icmp6_send+0x537/0x840
[40595.837125] icmpv6_send+0x20/0x30
[40595.837494] tnl_update_pmtu.isra.27+0x19d/0x2a0 [ip_tunnel]
[40595.838088] ip_md_tunnel_xmit+0x1b6/0x510 [ip_tunnel]
[40595.838633] gre_tap_xmit+0x10c/0x160 [ip_gre]
[40595.839103] dev_hard_start_xmit+0x93/0x200
[40595.839551] sch_direct_xmit+0x101/0x2d0
[40595.839967] __dev_queue_xmit+0x69f/0x9c0
[40595.840399] do_execute_actions+0x1717/0x1910 [openvswitch]
[40595.840987] ? validate_set.isra.12+0x2f5/0x3d0 [openvswitch]
[40595.841596] ? reserve_sfa_size+0x31/0x130 [openvswitch]
[40595.842154] ? __ovs_nla_copy_actions+0x1b4/0xad0 [openvswitch]
[40595.842778] ? __kmalloc_reserve.isra.50+0x2e/0x80
[40595.843285] ? should_failslab+0xa/0x20
[40595.843696] ? __kmalloc+0x188/0x220
[40595.844078] ? __alloc_skb+0x97/0x270
[40595.844472] ovs_execute_actions+0x47/0x120 [openvswitch]
[40595.845041] ovs_packet_cmd_execute+0x27d/0x2b0 [openvswitch]
[40595.845648] genl_family_rcv_msg+0x3a8/0x430
[40595.846101] genl_rcv_msg+0x47/0x90
[40595.846476] ? __alloc_skb+0x83/0x270
[40595.846866] ? genl_family_rcv_msg+0x430/0x430
[40595.847335] netlink_rcv_skb+0xcb/0x100
[40595.847777] genl_rcv+0x24/0x40
[40595.848113] netlink_unicast+0x17f/0x230
[40595.848535] netlink_sendmsg+0x2ed/0x3e0
[40595.848951] sock_sendmsg+0x4f/0x60
[40595.849323] ___sys_sendmsg+0x2bd/0x2e0
[40595.849733] ? sock_poll+0x6f/0xb0
[40595.850098] ? ep_scan_ready_list.isra.14+0x20b/0x240
[40595.850634] ? _cond_resched+0x15/0x30
[40595.851032] ? ep_poll+0x11b/0x440
[40595.851401] ? _copy_to_user+0x22/0x30
[40595.851799] __sys_sendmsg+0x58/0xa0
[40595.852180] do_syscall_64+0x5b/0x190
[40595.852574] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[40595.853105] RIP: 0033:0x7f5c00038c7d
[40595.853489] Code: c7 20 00 00 75 10 b8 2e 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e f7 ff ff 48 89 04 24 b8 2e 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 d7 f7 ff ff 48 89
d0 48 83 c4 08 48 3d 01
[40595.855443] RSP: 002b:00007f5bfcf73c00 EFLAGS: 00003293 ORIG_RAX: 000000000000002e
[40595.856244] RAX: ffffffffffffffda RBX: 00007f5bfcf74a60 RCX: 00007f5c00038c7d
[40595.856990] RDX: 0000000000000000 RSI: 00007f5bfcf73c60 RDI: 0000000000000015
[40595.857736] RBP: 0000000000000004 R08: 0000000000000b7c R09: 0000000000000110
[40595.858613] R10: 0001000800050004 R11: 0000000000003293 R12: 000055c2d8329da0
[40595.859401] R13: 00007f5bfcf74120 R14: 0000000000000347 R15: 00007f5bfcf73c60
[40595.860185] Modules linked in: ip_gre ip_tunnel gre openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sunrpc bochs_drm ttm drm_kms_helper drm pcspkr joydev i2c_piix4 qemu_fw_cfg xfs libcrc32c virtio_net net_failover serio_raw failover ata_generic virtio_blk pata_acpi floppy
[40595.863155] CR2: 0000000000000108
[40595.863551] ---[ end trace 22209bbcacb4addd ]---
v4: Julian Anastasov remind skb->dev also could be NULL in icmp_send. We'd
better still use dst.dev and do a check to avoid crash.
v3: only replace pkg to packets in cover letter. So I didn't update the version
info in the follow up patches.
v2: fix it in __icmp_send() and decode_session{4,6} separately instead of
updating shared dst dev in {ip_md, ip6}_tunnel_xmit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In decode_session{4,6} there is a possibility that the skb dst dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv6
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmpv6_send
- icmpv6_route_lookup
- xfrm_decode_session_reverse
- decode_session4
- oif = skb_dst(skb)->dev->ifindex; <-- here
- decode_session6
- oif = skb_dst(skb)->dev->ifindex; <-- here
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the skb_dst(skb)->dev is actually not needed as we
called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not
used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
So make a dst dev check here should be clean and safe.
v4: No changes.
v3: No changes.
v2: fix the issue in decode_session{4,6} instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In __icmp_send() there is a possibility that the rt->dst.dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv4
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmp_send
- net = dev_net(rt->dst.dev); <-- here
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the reason we need rt->dst.dev is to get the net.
So we can just try get it from skb->dev when rt->dst.dev is NULL.
v4: Julian Anastasov remind skb->dev also could be NULL. We'd better
still use dst.dev and do a check to avoid crash.
v3: No changes.
v2: fix the issue in __icmp_send() instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes: c8b34e680a09 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here is a (hopefully last) set of GPIO fixes for the v5.3 kernel
cycle. Two are pretty core:
- Fix not reporting open drain/source lines to userspace as "input"
- Fix a minor build error found in randconfigs
- Fix a chip select quirk on the Freescale SPI
- Fix the irqchip initialization semantic order to reflect what it
was using the old API"
* tag 'gpio-v5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Fix irqchip initialization order
gpio: of: fix Freescale SPI CS quirk handling
gpio: Fix build error of function redefinition
gpiolib: never report open-drain/source lines as 'input' to user-space
|
|
Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action")
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only mux controls the MIPI DSI input selection.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2019-08-24
An update from ieee802154 for your *net* tree.
Yue Haibing fixed two bugs discovered by KASAN in the hwsim driver for
ieee802154 and Colin Ian King cleaned up a redundant variable assignment.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for i.MX6UL modules from Kontron Electronics GmbH (before
acquisition: Exceet Electronics) and evalkit boards based on it:
1. N6310 SOM: i.MX6 UL System-on-Module, a 25x25 mm solderable module
(LGA pads and pin castellations) with 256 MB RAM, 1 MB NOR-Flash,
256 MB NAND and other interfaces,
2. N6310 S: evalkit, w/wo eMMC, without display,
3. N6310 S 43: evalkit with 4.3" display,
The work is based on Exceet/Kontron source code (GPLv2) with numerous
changes:
1. Reorganize files,
2. Rename Exceet -> Kontron,
3. Rename models/compatibles to match newest Kontron product naming,
4. Fix coding style errors and adjust to device tree coding guidelines,
5. Fix DTC warnings,
6. Extend compatibles so eval boards inherit the SoM compatible,
7. Use defines instead of GPIO and interrupt flag values,
8. Use proper vendor compatible for Macronix SPI NOR,
9. Replace deprecated bindings with proper ones,
10. Sort nodes alphabetically,
11. Remove Admatec display nodes (not yet supported).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the compatibles for Kontron i.MX6UL N6310 SoM and boards.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Document the compatible for ANV32E61W 64kb Serial SPI non-volatile SRAM.
Although it is a SRAM device, it can be accessed through EEPROM
interface. At least until there is no proper SRAM driver support for
it.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add vendor prefix for Anvo-Systems Dresden GmbH.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The current code prints 'ret' (thus 0) while it should use 'err'.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SolidRun Hummingboard Pulse carrier board carries the SolidRun
i.MX8MQ based SOM.
Notably missing is PCIe support that depends on analog PLLOUT clock.
Current imx clk driver does not support this clock.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add binding documentation for the SolidRun Hummingboard Pulse board.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fiber-optic modules attached to the bus are only rated to work at
100 kHz, so decrease the bus frequency to accommodate that.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
add ls1088a gpio specify compatible.
Signed-off-by: Song Hui <hui.song_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add basic dts support for i.MX8MQ NITROGEN8M.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
[Dafna: porting vendor's code to mainline]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Nitrogen8M is an ARM based single board computer (SBC)
designed to leverage the full capabilities of NXP’s i.MX8M
Quad processor.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
[Dafna: porting vendor's code to mainline]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Sasha Levin:
- Fix for panics and network failures on PAE guests by Dexuan Cui.
- Fix of a memory leak (and related cleanups) in the hyper-v keyboard
driver by Dexuan Cui.
- Code cleanups for hyper-v clocksource driver during the merge window
by Dexuan Cui.
- Fix for a false positive warning in the userspace hyper-v KVP store
by Vitaly Kuznetsov.
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Fix virt_to_hvpfn() for X86_PAE
Tools: hv: kvp: eliminate 'may be used uninitialized' warning
Input: hyperv-keyboard: Use in-place iterator API in the channel callback
Drivers: hv: vmbus: Remove the unused "tsc_page" from struct hv_context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two KVM/arm fixes for MMIO emulation and UBSAN.
Unusually, we're routing them via the arm64 tree as per Paolo's
request on the list:
https://lore.kernel.org/kvm/21ae69a2-2546-29d0-bff6-2ea825e3d968@redhat.com/
We don't actually have any other arm64 fixes pending at the moment
(touch wood), so I've pulled from Marc, written a merge commit, tagged
the result and run it through my build/boot/bisect scripts"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity
KVM: arm/arm64: Only skip MMIO insn once
|
|
This patch adds the spi-flash nodes under the DSPI controller for
ls1088a-qds boards.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch adds the DSPI controller node for ls1088a boards.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
new compatible string: "fsl,ls1088a-dspi".
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Recent changes to the Atheros at803x driver cause
the approach taken here to stop working because
commit 6d4cd041f0af
("net: phy: at803x: disable delay only for RGMII mode")
and commit cd28d1d6e52e
("net: phy: at803x: Disable phy delay for RGMII mode")
fix the AR8031 driver to configure the phy's (RX/TX)
delays as per the 'phy-mode' in the device tree.
In particular, the phy tx (and rx) delays are updated
again as per the 'phy-mode' *after* the code in here
runs.
Things worked before above commits, because the AR8031
comes out of reset with RX delay enabled, and the
at803x driver didn't touch the delay configuration at
all when "rgmii" mode was selected.
It appears the code in here tries to make device
trees work that incorrectly specify "rgmii", but
that can't work any more and it is imperative since
above commits to have the phy-mode configured
correctly in the device tree.
I suspect there are a few imx7d based boards using
the ar8031 phy and phy-mode = "rgmii", but given I
don't know which ones exactly, I am not in a
position to update the respective device trees.
Hence this patch is simply removing the superfluous
code from the imx7d initialisation. An alternative
could be to add a warning instead, but that would
penalize all boards that have been updated already.
Signed-off-by: André Draszik <git@andred.net>
CC: Russell King <linux@armlinux.org.uk>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Leonard Crestez <leonard.crestez@nxp.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, three for edge conditions which don't occur very often.
The lpfc fix mitigates memory exhaustion for some high CPU systems"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Mitigate high memory pre-allocation by SCSI-MQ
scsi: ufs: Fix NULL pointer dereference in ufshcd_config_vreg_hpm()
scsi: target: tcmu: avoid use-after-free after command timeout
scsi: qla2xxx: Fix gnl.l memory leak on adapter init failure
|
|
Pull xfs fix from Darrick Wong:
"A single patch that fixes a xfs lockup problem when a chown/chgrp
operation fails due to running out of quota. It has survived the usual
xfstests runs and merges cleanly with this morning's master:
- Fix a forgotten inode unlock when chown/chgrp fail due to quota"
* tag 'xfs-5.3-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix missing ILOCK unlock when xfs_setattr_nonsize fails due to EDQUOT
|
|
The rtc8564 is made by Epson but is similar to the NXP pcf8563. Use the
correct vendor name.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull more drm fixes from Dave Airlie:
"Although the tree built for me fine on arm here, it appears either
header cleanups in next or some kconfig combo it breaks, so this
contains a fix to mediatek to include dma-mapping.h explicitly.
There was also one nouveau fix that came in late that I was going to
leave until next week, but since I was sending this I thought it may
as well be in here:
mediatek:
- fix build in some cases
nouveau:
- fix hang with i2c and mst docks"
* tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drm:
drm/mediatek: include dma-mapping header
drm/nouveau: Don't retry infinitely when receiving no data on i2c over AUX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm/fixes
Pull KVM/arm fixes from Marc Zyngier as per Paulo's request at:
https://lkml.kernel.org/r/21ae69a2-2546-29d0-bff6-2ea825e3d968@redhat.com
"One (hopefully last) set of fixes for KVM/arm for 5.3: an embarassing
MMIO emulation regression, and a UBSAN splat. Oh well...
- Don't overskip instructions on MMIO emulation
- Fix UBSAN splat when initializing PPI priorities"
* tag 'kvmarm-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity
KVM: arm/arm64: Only skip MMIO insn once
|
|
Although it builds fine here in my arm cross compile, it seems
either via some other patches in -next or some Kconfig combination,
this fails to build for everyone.
Include linux/dma-mapping.h should fix it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-08-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix verifier precision tracking with BPF-to-BPF calls, from Alexei.
2) Fix a use-after-free in prog symbol exposure, from Daniel.
3) Several s390x JIT fixes plus BE related fixes in BPF kselftests, from Ilya.
4) Fix memory leak by unpinning XDP umem pages in error path, from Ivan.
5) Fix a potential use-after-free on flow dissector detach, from Jakub.
6) Fix bpftool to close prog fd after showing metadata, from Quentin.
7) BPF kselftest config and TEST_PROGS_EXTENDED fixes, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
test_select_reuseport fails on s390 due to verifier rejecting
test_select_reuseport_kern.o with the following message:
; data_check.eth_protocol = reuse_md->eth_protocol;
18: (69) r1 = *(u16 *)(r6 +22)
invalid bpf_context access off=22 size=2
This is because on big-endian machines casts from __u32 to __u16 are
generated by referencing the respective variable as __u16 with an offset
of 2 (as opposed to 0 on little-endian machines).
The verifier already has all the infrastructure in place to allow such
accesses, it's just that they are not explicitly enabled for
eth_protocol field. Enable them for eth_protocol field by using
bpf_ctx_range instead of offsetof.
Ditto for ip_protocol, bind_inany and len, since they already allow
narrowing, and the same problem can arise when working with them.
Fixes: 2dbb9b9e6df6 ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
syzkaller managed to trigger the warning in bpf_jit_free() which checks via
bpf_prog_kallsyms_verify_off() for potentially unlinked JITed BPF progs
in kallsyms, and subsequently trips over GPF when walking kallsyms entries:
[...]
8021q: adding VLAN 0 to HW filter on device batadv0
8021q: adding VLAN 0 to HW filter on device batadv0
WARNING: CPU: 0 PID: 9869 at kernel/bpf/core.c:810 bpf_jit_free+0x1e8/0x2a0
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9869 Comm: kworker/0:7 Not tainted 5.0.0-rc8+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events bpf_prog_free_deferred
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x113/0x167 lib/dump_stack.c:113
panic+0x212/0x40b kernel/panic.c:214
__warn.cold.8+0x1b/0x38 kernel/panic.c:571
report_bug+0x1a4/0x200 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:178 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
RIP: 0010:bpf_jit_free+0x1e8/0x2a0
Code: 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 86 00 00 00 48 ba 00 02 00 00 00 00 ad de 0f b6 43 02 49 39 d6 0f 84 5f fe ff ff <0f> 0b e9 58 fe ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1
RSP: 0018:ffff888092f67cd8 EFLAGS: 00010202
RAX: 0000000000000007 RBX: ffffc90001947000 RCX: ffffffff816e9d88
RDX: dead000000000200 RSI: 0000000000000008 RDI: ffff88808769f7f0
RBP: ffff888092f67d00 R08: fffffbfff1394059 R09: fffffbfff1394058
R10: fffffbfff1394058 R11: ffffffff89ca02c7 R12: ffffc90001947002
R13: ffffc90001947020 R14: ffffffff881eca80 R15: ffff88808769f7e8
BUG: unable to handle kernel paging request at fffffbfff400d000
#PF error: [normal kernel read fault]
PGD 21ffee067 P4D 21ffee067 PUD 21ffed067 PMD 9f942067 PTE 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9869 Comm: kworker/0:7 Not tainted 5.0.0-rc8+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events bpf_prog_free_deferred
RIP: 0010:bpf_get_prog_addr_region kernel/bpf/core.c:495 [inline]
RIP: 0010:bpf_tree_comp kernel/bpf/core.c:558 [inline]
RIP: 0010:__lt_find include/linux/rbtree_latch.h:115 [inline]
RIP: 0010:latch_tree_find include/linux/rbtree_latch.h:208 [inline]
RIP: 0010:bpf_prog_kallsyms_find+0x107/0x2e0 kernel/bpf/core.c:632
Code: 00 f0 ff ff 44 38 c8 7f 08 84 c0 0f 85 fa 00 00 00 41 f6 45 02 01 75 02 0f 0b 48 39 da 0f 82 92 00 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 03 0f 8e 45 01 00 00 8b 03 48 c1 e0
[...]
Upon further debugging, it turns out that whenever we trigger this
issue, the kallsyms removal in bpf_prog_ksym_node_del() was /skipped/
but yet bpf_jit_free() reported that the entry is /in use/.
Problem is that symbol exposure via bpf_prog_kallsyms_add() but also
perf_event_bpf_event() were done /after/ bpf_prog_new_fd(). Once the
fd is exposed to the public, a parallel close request came in right
before we attempted to do the bpf_prog_kallsyms_add().
Given at this time the prog reference count is one, we start to rip
everything underneath us via bpf_prog_release() -> bpf_prog_put().
The memory is eventually released via deferred free, so we're seeing
that bpf_jit_free() has a kallsym entry because we added it from
bpf_prog_load() but /after/ bpf_prog_put() from the remote CPU.
Therefore, move both notifications /before/ we install the fd. The
issue was never seen between bpf_prog_alloc_id() and bpf_prog_new_fd()
because upon bpf_prog_get_fd_by_id() we'll take another reference to
the BPF prog, so we're still holding the original reference from the
bpf_prog_load().
Fixes: 6ee52e2a3fe4 ("perf, bpf: Introduce PERF_RECORD_BPF_EVENT")
Fixes: 74451e66d516 ("bpf: make jited programs visible in traces")
Reported-by: syzbot+bd3bba6ff3fcea7a6ec6@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Song Liu <songliubraving@fb.com>
|
|
While adding extra tests for precision tracking and extra infra
to adjust verifier heuristics the existing test
"calls: cross frame pruning - liveness propagation" started to fail.
The root cause is the same as described in verifer.c comment:
* Also if parent's curframe > frame where backtracking started,
* the verifier need to mark registers in both frames, otherwise callees
* may incorrectly prune callers. This is similar to
* commit 7640ead93924 ("bpf: verifier: make sure callees don't prune with caller differences")
* For now backtracking falls back into conservative marking.
Turned out though that returning -ENOTSUPP from backtrack_insn() and
doing mark_all_scalars_precise() in the current parentage chain is not enough.
Depending on how is_state_visited() heuristic is creating parentage chain
it's possible that callee will incorrectly prune caller.
Fix the issue by setting precise=true earlier and more aggressively.
Before this fix the precision tracking _within_ functions that don't do
bpf2bpf calls would still work. Whereas now precision tracking is completely
disabled when bpf2bpf calls are present anywhere in the program.
No difference in cilium tests (they don't have bpf2bpf calls).
No difference in test_progs though some of them have bpf2bpf calls,
but precision tracking wasn't effective there.
Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Call to bpf_prog_put(), with help of call_rcu(), queues an RCU-callback to
free the program once a grace period has elapsed. The callback can run
together with new RCU readers that started after the last grace period.
New RCU readers can potentially see the "old" to-be-freed or already-freed
pointer to the program object before the RCU update-side NULLs it.
Reorder the operations so that the RCU update-side resets the protected
pointer before the end of the grace period after which the program will be
freed.
Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This reverts commit f072218cca5b076dd99f3dfa3aaafedfd0023a51.
As reported by Aaro this patch causes network problems on
MIPS Loongson platform. Therefore revert it.
Fixes: f072218cca5b ("r8169: remove not needed call to dma_sync_single_for_device")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull rdma fixes from Doug Ledford:
"No beating around the bush: this is a monster pull request for an -rc5
kernel. Intel hit me with a series of fixes for TID processing.
Mellanox hit me with a series for their UMR memory support.
And we had one fix for siw that fixes the 32bit build warnings and
because of the number of casts that had to be changed to properly
silence the warnings, that one patch alone is a full 40% of the LOC of
this entire pull request. Given that this is the initial release
kernel for siw, I'm trying to fix anything in it that we can, so that
adds to the impetus to take fixes for it like this one.
I had to do a rebase early in the week. Jason had thought he put a
patch on the rc queue that he needed to be there so he could base some
work off of it, and it had actually not been placed there. So he asked
me (on Tuesday) to fix that up before pushing my wip branch to the
official rc branch. I did, and that's why the early patches look like
they were all committed at the same time on Tuesday. That bunch had
been in my queue prior.
The various patches all pass my test for being legitimate fixes and
not attempts to slide new features or development into a late rc.
Well, they were all fixes with the exception of a couple clean up
patches people wrote for making the fixes they also wrote better (like
a cleanup patch to move UMR checking into a function so that the
remaining UMR fix patches can reference that function), so I left
those in place too.
My apologies for the LOC count and the number of patches here, it's
just how the cards fell this cycle.
Summary:
- Fix siw buffer mapping issue
- Fix siw 32/64 casting issues
- Fix a KASAN access issue in bnxt_re
- Fix several memory leaks (hfi1, mlx4)
- Fix a NULL deref in cma_cleanup
- Fixes for UMR memory support in mlx5 (4 patch series)
- Fix namespace check for restrack
- Fixes for counter support
- Fixes for hfi1 TID processing (5 patch series)
- Fix potential NULL deref in siw
- Fix memory page calculations in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (21 commits)
RDMA/siw: Fix 64/32bit pointer inconsistency
RDMA/siw: Fix SGL mapping issues
RDMA/bnxt_re: Fix stack-out-of-bounds in bnxt_qplib_rcfw_send_message
infiniband: hfi1: fix memory leaks
infiniband: hfi1: fix a memory leak bug
IB/mlx4: Fix memory leaks
RDMA/cma: fix null-ptr-deref Read in cma_cleanup
IB/mlx5: Block MR WR if UMR is not possible
IB/mlx5: Fix MR re-registration flow to use UMR properly
IB/mlx5: Report and handle ODP support properly
IB/mlx5: Consolidate use_umr checks into single function
RDMA/restrack: Rewrite PID namespace check to be reliable
RDMA/counters: Properly implement PID checks
IB/core: Fix NULL pointer dereference when bind QP to counter
IB/hfi1: Drop stale TID RDMA packets that cause TIDErr
IB/hfi1: Add additional checks when handling TID RDMA WRITE DATA packet
IB/hfi1: Add additional checks when handling TID RDMA READ RESP packet
IB/hfi1: Unsafe PSN checking for TID RDMA READ Resp packet
IB/hfi1: Drop stale TID RDMA packets
RDMA/siw: Fix potential NULL de-ref
...
|
|
Currently, ipv6_find_idev returns NULL when ipv6_add_dev fails,
ignoring the specific error value. This results in addrconf_add_dev
returning ENOBUFS in all cases, which is unfortunate in cases such as:
# ip link add dummyX type dummy
# ip link set dummyX mtu 1200 up
# ip addr add 2000::/64 dev dummyX
RTNETLINK answers: No buffer space available
Commit a317a2f19da7 ("ipv6: fail early when creating netdev named all
or default") introduced error returns in ipv6_add_dev. Before that,
that function would simply return NULL for all failures.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block fixes from Jens Axboe:
"Here's a set of fixes that should go into this release. This contains:
- Three minor fixes for NVMe.
- Three minor tweaks for the io_uring polling logic.
- Officially mark Song as the MD maintainer, after he's been filling
that role sucessfully for the last 6 months or so"
* tag 'for-linus-20190823' of git://git.kernel.dk/linux-block:
io_uring: add need_resched() check in inner poll loop
md: update MAINTAINERS info
io_uring: don't enter poll loop if we have CQEs pending
nvme: Add quirk for LiteON CL1 devices running FW 22301111
nvme: Fix cntlid validation when not using NVMEoF
nvme-multipath: fix possible I/O hang when paths are updated
io_uring: fix potential hang with polled IO
|
|
Map my old email address @atmel.com to my new company name. It happened 3
years ago but I realized the existence of this file recently.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20190823083158.2649-3-nicolas.ferre@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
"MICROCHIP TIMER COUNTER (TC) AND CLOCKSOURCE DRIVERS" is better
removed because one file entry is outdated and basically, the
maintainer's pool of Alexandre, Ludovic and myself is better suited.
drivers/misc/atmel_tclib.c file is going away in a patch to come and
drivers/clocksource/tcb_clksrc.c file is actually named timer-atmel-tcb.c.
This new name matches the AT91 entry regular expression.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20190823083158.2649-2-nicolas.ferre@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Andrei's address is not valid anymore, collect all pinctrl/gpio
entries in the common "PIN CONTROLLER - MICROCHIP AT91" one
and remove the PIOBU specific one.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20190823083158.2649-1-nicolas.ferre@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
<generated/at91_pm_data-offsets.h> is only generated and included by
arch/arm/mach-at91/, so it does not need to reside in the globally
visible include/generated/.
I renamed it to arch/arm/mach-at91/pm_data-offsets.h since the prefix
'at91_' is just redundant in mach-at91/.
My main motivation of this change is to avoid the race condition for
the parallel build (-j) when CONFIG_IKHEADERS is enabled.
When it is enabled, all the headers under include/ are archived into
kernel/kheaders_data.tar.xz and exposed in the sysfs.
In the parallel build, we have no idea in which order files are built.
- If at91_pm_data-offsets.h is built before kheaders_data.tar.xz,
the header will be included in the archive. Probably nobody will
use it, but it is harmless except that it will increase the archive
size needlessly.
- If kheaders_data.tar.xz is built before at91_pm_data-offsets.h,
the header will not be included in the archive. However, in the next
build, the archive will be re-generated to include the newly-found
at91_pm_data-offsets.h. This is not nice from the build system point
of view.
- If at91_pm_data-offsets.h and kheaders_data.tar.xz are built at the
same time, the corrupted header might be included in the archive,
which does not look nice either.
This commit fixes the race.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190823024346.591-1-yamada.masahiro@socionext.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Revert a DM bufio change from during the 5.3 merge window now that a
proper fix has been made to the block loopback driver.
- Fix DM kcopyd to wakeup so failed subjobs get completed.
- Various fixes to DM zoned target to address error handling, and other
small tweaks (SPDX license identifiers and fix typos).
- Fix DM integrity range locking race by tracking whether journal has
changed.
- Fix DM dust target to detect reads of badblocks beyond the first 512b
sector (applicable if blocksize is larger than 512b).
- Fix DM persistent-data issue in both the DM btree and DM
space-map-metadata interfaces.
- Fix out of bounds memory access with certain DM table configurations.
* tag 'for-5.3/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: fix invalid memory accesses with too high sector number
dm space map metadata: fix missing store of apply_bops() return value
dm btree: fix order of block initialization in btree_split_beneath
dm raid: add missing cleanup in raid_ctr()
dm zoned: fix potential NULL dereference in dmz_do_reclaim()
dm dust: use dust block size for badblocklist index
dm integrity: fix a crash due to BUG_ON in __journal_read_write()
dm zoned: fix a few typos
dm zoned: add SPDX license identifiers
dm zoned: properly handle backing device failure
dm zoned: improve error handling in i/o map code
dm zoned: improve error handling in reclaim
dm kcopyd: always complete failed jobs
Revert "dm bufio: fix deadlock with loop device"
|
|
Pull xfs fixes from Darrick Wong:
"Here are a few more bug fixes that trickled in since the last pull.
They've survived the usual xfstests runs and merge cleanly with this
morning's master.
I expect there to be one more pull request tomorrow for the fix to
that quota related inode unlock bug that we were reviewing last night,
but it will continue to soak in the testing machine for several more
hours.
- Fix missing compat ioctl handling for get/setlabel
- Fix missing ioctl pointer sanitization on s390
- Fix a page locking deadlock in the dedupe comparison code
- Fix inadequate locking in reflink code w.r.t. concurrent directio
- Fix broken error detection when breaking layouts"
* tag 'xfs-5.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs/xfs: Fix return code of xfs_break_leased_layouts()
xfs: fix reflink source file racing with directio writes
vfs: fix page locking deadlocks when deduping files
xfs: compat_ioctl: use compat_ptr()
xfs: fall back to native ioctls for unhandled compat ones
|
|
At the moment we initialise the target *mask* of a virtual IRQ to the
VCPU it belongs to, even though this mask is only defined for GICv2 and
quickly runs out of bits for many GICv3 guests.
This behaviour triggers an UBSAN complaint for more than 32 VCPUs:
------
[ 5659.462377] UBSAN: Undefined behaviour in virt/kvm/arm/vgic/vgic-init.c:223:21
[ 5659.471689] shift exponent 32 is too large for 32-bit type 'unsigned int'
------
Also for GICv3 guests the reporting of TARGET in the "vgic-state" debugfs
dump is wrong, due to this very same problem.
Because there is no requirement to create the VGIC device before the
VCPUs (and QEMU actually does it the other way round), we can't safely
initialise mpidr or targets in kvm_vgic_vcpu_init(). But since we touch
every private IRQ for each VCPU anyway later (in vgic_init()), we can
just move the initialisation of those fields into there, where we
definitely know the VGIC type.
On the way make sure we really have either a VGICv2 or a VGICv3 device,
since the existing code is just checking for "VGICv3 or not", silently
ignoring the uninitialised case.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Dave Martin <dave.martin@arm.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fixes from Jessica Yu:
"Fix BUG_ON() being triggered in frob_text() due to non-page-aligned
module sections"
* tag 'modules-for-v5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modules: page-align module section allocations only for arches supporting strict module rwx
modules: always page-align module section allocations
|
|
Multiple batadv_ogm2_packet can be stored in an skbuff. The functions
batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there
is another additional batadv_ogm2_packet in the skb or not before they
continue processing the packet.
The length for such an OGM2 is BATADV_OGM2_HLEN +
batadv_ogm2_packet->tvlv_len. The check must first check that at least
BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is
part of the header. Otherwise it might try read outside of the currently
available skbuff to get the content of tvlv_len.
Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Multiple batadv_ogm_packet can be stored in an skbuff. The functions
batadv_iv_ogm_send_to_if()/batadv_iv_ogm_receive() use
batadv_iv_ogm_aggr_packet() to check if there is another additional
batadv_ogm_packet in the skb or not before they continue processing the
packet.
The length for such an OGM is BATADV_OGM_HLEN +
batadv_ogm_packet->tvlv_len. The check must first check that at least
BATADV_OGM_HLEN bytes are available before it accesses tvlv_len (which is
part of the header. Otherwise it might try read outside of the currently
available skbuff to get the content of tvlv_len.
Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure")
Reported-by: syzbot+355cab184197dbbfa384@syzkaller.appspotmail.com
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Pull ceph fixes from Ilya Dryomov:
"Three important fixes tagged for stable (an indefinite hang, a crash
on an assert and a NULL pointer dereference) plus a small series from
Luis fixing instances of vfree() under spinlock"
* tag 'ceph-for-5.3-rc6' of git://github.com/ceph/ceph-client:
libceph: fix PG split vs OSD (re)connect race
ceph: don't try fill file_lock on unsuccessful GETFILELOCK reply
ceph: clear page dirty before invalidate page
ceph: fix buffer free while holding i_ceph_lock in fill_inode()
ceph: fix buffer free while holding i_ceph_lock in __ceph_build_xattrs_blob()
ceph: fix buffer free while holding i_ceph_lock in __ceph_setxattr()
libceph: allow ceph_buffer_put() to receive a NULL ceph_buffer
|
