summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-30dt-bindings: mediatek: Add binding for mt8183 IOMMU and SMIYong Wu
This patch adds decriptions for mt8183 IOMMU and SMI. mt8183 has only one M4U like mt8173 and is also MTK IOMMU gen2 which uses ARM Short-Descriptor translation table format. The mt8183 M4U-SMI HW diagram is as below: EMI | M4U | ---------- | | gals0-rx gals1-rx | | | | gals0-tx gals1-tx | | ------------ SMI Common ------------ | +-----+-----+--------+-----+-----+-------+-------+ | | | | | | | | | | gals-rx gals-rx | gals-rx gals-rx gals-rx | | | | | | | | | | | | | | | | | | gals-tx gals-tx | gals-tx gals-tx gals-tx | | | | | | | | larb0 larb1 IPU0 IPU1 larb4 larb5 larb6 CCU disp vdec img cam venc img cam All the connections are HW fixed, SW can NOT adjust it. Compared with mt8173, we add a GALS(Global Async Local Sync) module between SMI-common and M4U, and additional GALS between larb2/3/5/6 and SMI-common. GALS can help synchronize for the modules in different clock frequency, it can be seen as a "asynchronous fifo". GALS can only help transfer the command/data while it doesn't have the configuring register, thus it has the special "smi" clock and it doesn't have the "apb" clock. From the diagram above, we add "gals0" and "gals1" clocks for smi-common and add a "gals" clock for smi-larb. >From the diagram above, IPU0/IPU1(Image Processor Unit) and CCU(Camera Control Unit) is connected with smi-common directly, we can take them as "larb2", "larb3" and "larb7", and their register spaces are different with the normal larb. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-30iommu: Revisit iommu_insert_resv_region() implementationEric Auger
Current implementation is recursive and in case of allocation failure the existing @regions list is altered. A non recursive version looks better for maintainability and simplifies the error handling. We use a separate stack for overlapping segment merging. The elements are sorted by start address and then by type, if their start address match. Note this new implementation may change the region order of appearance in /sys/kernel/iommu_groups/<n>/reserved_regions files but this order has never been documented, see commit bc7d12b91bd3 ("iommu: Implement reserved_regions iommu-group sysfs file"). Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-30iommu/vt-d: Fix wrong analysis whether devices share the same busNadav Amit
set_msi_sid_cb() is used to determine whether device aliases share the same bus, but it can provide false indications that aliases use the same bus when in fact they do not. The reason is that set_msi_sid_cb() assumes that pdev is fixed, while actually pci_for_each_dma_alias() can call fn() when pdev is set to a subordinate device. As a result, running an VM on ESX with VT-d emulation enabled can results in the log warning such as: DMAR: [INTR-REMAP] Request device [00:11.0] fault index 3b [fault reason 38] Blocked an interrupt request due to source-id verification failure This seems to cause additional ata errors such as: ata3.00: qc timeout (cmd 0xa1) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) These timeouts also cause boot to be much longer and other errors. Fix it by checking comparing the alias with the previous one instead. Fixes: 3f0c625c6ae71 ("iommu/vt-d: Allow interrupts from the entire bus for aliased devices") Cc: stable@vger.kernel.org Cc: Logan Gunthorpe <logang@deltatee.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Nadav Amit <namit@vmware.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-30Merge tag 'gpio-v5.3-rc7-fixes-for-linus' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.3-rc7 - two patches fixing a regression in the pca953x driver
2019-08-30iommu/iova: Avoid false sharing on fq_timer_onEric Dumazet
In commit 14bd9a607f90 ("iommu/iova: Separate atomic variables to improve performance") Jinyu Qi identified that the atomic_cmpxchg() in queue_iova() was causing a performance loss and moved critical fields so that the false sharing would not impact them. However, avoiding the false sharing in the first place seems easy. We should attempt the atomic_cmpxchg() no more than 100 times per second. Adding an atomic_read() will keep the cache line mostly shared. This false sharing came with commit 9a005a800ae8 ("iommu/iova: Add flush timer"). Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 9a005a800ae8 ('iommu/iova: Add flush timer') Cc: Jinyu Qi <jinyuqi@huawei.com> Cc: Joerg Roedel <jroedel@suse.de> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-30i2c: mediatek: disable zero-length transfers for mt8183Hsin-Yi Wang
Quoting from mt8183 datasheet, the number of transfers to be transferred in one transaction should be set to bigger than 1, so we should forbid zero-length transfer and update functionality. Reported-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Qii Wang <qii.wang@mediatek.com> [wsa: shortened commit message a little] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-30i2c: iproc: Stop advertising support of SMBUS quick cmdLori Hikichi
The driver does not support the SMBUS Quick command so remove the flag that indicates that level of support. By default the i2c_detect tool uses the quick command to try and detect devices at some bus addresses. If the quick command is used then we will not detect the device, even though it is present. Fixes: e6e5dd3566e0 (i2c: iproc: Add Broadcom iProc I2C Driver) Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-30MAINTAINERS: i2c mv64xxx: Update documentation pathDenis Efremov
Update MAINTAINERS record to reflect the file move from i2c-mv64xxx.txt to marvell,mv64xxx-i2c.yaml. Fixes: f8bbde72ef44 ("dt-bindings: i2c: mv64xxx: Add YAML schemas") Signed-off-by: Denis Efremov <efremov@linux.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-30perf/x86/amd/ibs: Fix sample bias for dispatched micro-opsKim Phillips
When counting dispatched micro-ops with cnt_ctl=1, in order to prevent sample bias, IBS hardware preloads the least significant 7 bits of current count (IbsOpCurCnt) with random values, such that, after the interrupt is handled and counting resumes, the next sample taken will be slightly perturbed. The current count bitfield is in the IBS execution control h/w register, alongside the maximum count field. Currently, the IBS driver writes that register with the maximum count, leaving zeroes to fill the current count field, thereby overwriting the random bits the hardware preloaded for itself. Fix the driver to actually retain and carry those random bits from the read of the IBS control register, through to its write, instead of overwriting the lower current count bits with zeroes. Tested with: perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 <workload> 'perf annotate' output before: 15.70 65: addsd %xmm0,%xmm1 17.30 add $0x1,%rax 15.88 cmp %rdx,%rax je 82 17.32 72: test $0x1,%al jne 7c 7.52 movapd %xmm1,%xmm0 5.90 jmp 65 8.23 7c: sqrtsd %xmm1,%xmm0 12.15 jmp 65 'perf annotate' output after: 16.63 65: addsd %xmm0,%xmm1 16.82 add $0x1,%rax 16.81 cmp %rdx,%rax je 82 16.69 72: test $0x1,%al jne 7c 8.30 movapd %xmm1,%xmm0 8.13 jmp 65 8.24 7c: sqrtsd %xmm1,%xmm0 8.39 jmp 65 Tested on Family 15h and 17h machines. Machines prior to family 10h Rev. C don't have the RDWROPCNT capability, and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't affect their operation. It is unknown why commit db98c5faf8cb ("perf/x86: Implement 64-bit counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt field; the number of preloaded random bits has always been 7, AFAICT. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Arnaldo Carvalho de Melo" <acme@kernel.org> Cc: <x86@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Borislav Petkov" <bp@alien8.de> Cc: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: "Namhyung Kim" <namhyung@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20190826195730.30614-1-kim.phillips@amd.com
2019-08-30perf/x86/intel: Restrict period on NehalemJosh Hunt
We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in some cases when using perf: perfevents: irq loop stuck! WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530 ... RIP: 0010:intel_pmu_handle_irq+0x37b/0x530 ... Call Trace: <NMI> ? perf_event_nmi_handler+0x2e/0x50 ? intel_pmu_save_and_restart+0x50/0x50 perf_event_nmi_handler+0x2e/0x50 nmi_handle+0x6e/0x120 default_do_nmi+0x3e/0x100 do_nmi+0x102/0x160 end_repeat_nmi+0x16/0x50 ... ? native_write_msr+0x6/0x20 ? native_write_msr+0x6/0x20 </NMI> intel_pmu_enable_event+0x1ce/0x1f0 x86_pmu_start+0x78/0xa0 x86_pmu_enable+0x252/0x310 __perf_event_task_sched_in+0x181/0x190 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 finish_task_switch+0x158/0x260 __schedule+0x2f6/0x840 ? hrtimer_start_range_ns+0x153/0x210 schedule+0x32/0x80 schedule_hrtimeout_range_clock+0x8a/0x100 ? hrtimer_init+0x120/0x120 ep_poll+0x2f7/0x3a0 ? wake_up_q+0x60/0x60 do_epoll_wait+0xa9/0xc0 __x64_sys_epoll_wait+0x1a/0x20 do_syscall_64+0x4e/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fdeb1e96c03 ... Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: acme@kernel.org Cc: Josh Hunt <johunt@akamai.com> Cc: bpuranda@akamai.com Cc: mingo@redhat.com Cc: jolsa@redhat.com Cc: tglx@linutronix.de Cc: namhyung@kernel.org Cc: alexander.shishkin@linux.intel.com Link: https://lkml.kernel.org/r/1566256411-18820-1-git-send-email-johunt@akamai.com
2019-08-30Merge branch 'for-next/atomics' into for-next/coreWill Deacon
* for-next/atomics: (10 commits) Rework LSE instruction selection to use static keys instead of alternatives
2019-08-30Merge branches 'for-next/52-bit-kva', 'for-next/cpu-topology', ↵Will Deacon
'for-next/error-injection', 'for-next/perf', 'for-next/psci-cpuidle', 'for-next/rng', 'for-next/smpboot', 'for-next/tbi' and 'for-next/tlbi' into for-next/core * for-next/52-bit-kva: (25 commits) Support for 52-bit virtual addressing in kernel space * for-next/cpu-topology: (9 commits) Move CPU topology parsing into core code and add support for ACPI 6.3 * for-next/error-injection: (2 commits) Support for function error injection via kprobes * for-next/perf: (8 commits) Support for i.MX8 DDR PMU and proper SMMUv3 group validation * for-next/psci-cpuidle: (7 commits) Move PSCI idle code into a new CPUidle driver * for-next/rng: (4 commits) Support for 'rng-seed' property being passed in the devicetree * for-next/smpboot: (3 commits) Reduce fragility of secondary CPU bringup in debug configurations * for-next/tbi: (10 commits) Introduce new syscall ABI with relaxed requirements for pointer tags * for-next/tlbi: (6 commits) Handle spurious page faults arising from kernel space
2019-08-30spi: bcm-qspi: Make BSPI default modeRayagonda Kokatanur
The spi-nor controller defaults to BSPI mode, hence switch back to its default mode after MSPI operations (write or erase) are completed. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com> Link: https://lore.kernel.org/r/1567139325-7912-1-git-send-email-rayagonda.kokatanur@broadcom.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30spi: npcm-fiu: add NPCM FIU controller driverTomer Maimon
Add Nuvoton NPCM BMC Flash Interface Unit(FIU) SPI master controller driver using SPI-MEM interface. The FIU supports single, dual or quad communication interface. the FIU controller can operate in following modes: - User Mode Access(UMA): provides flash access by using an indirect address/data mechanism. - direct rd/wr mode: maps the flash memory into the core address space. - SPI-X mode: used for an expansion bus to an ASIC or CPLD. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20190828142513.228556-3-tmaimon77@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30dt-binding: spi: add NPCM FIU controllerTomer Maimon
Added device tree binding documentation for Nuvoton BMC NPCM Flash Interface Unit(FIU) SPI master controller using SPI-MEM interface. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20190828142513.228556-2-tmaimon77@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30spi: dw-pci: Add MODULE_DEVICE_TABLEJarkko Nikula
MODULE_DEVICE_TABLE is missing from the PCI part of the driver. Add it so userspace can autoload the the driver when it is built as module. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20190829125000.26303-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30MAINTAINERS: Add keyword pattern on regulator_get_optional()Mark Brown
In an effort to try to contain abuses of regulator_get_optional() add a keyword entry to the MAINTAINERS stanza for the regulator API so that the regulator maintainers get CCed on new usages. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20190829125435.48770-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30regulator: sy8824x: add prefixes to BUCK_EN and MODE macrosJisheng Zhang
Add prefixes to BUCK_EN and MODE macros to namespace them. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20190829143927.395d0385@xhacker.debian Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30regulator: sy8824x: use c++style for the comment block near SPDXJisheng Zhang
Update the entire comment block to be C++ style so it looks consistent. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20190829143749.4b42bc65@xhacker.debian Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30regulator: mt6358: Add BROKEN dependency while waiting for MFD to mergeMark Brown
The mt6358 driver was merged in error, it depends on an existing MFD rather than a newly added one and needs updates to that driver. Disable the build until those are merged. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30iommu/amd: Silence warnings under memory pressureQian Cai
When running heavy memory pressure workloads, the system is throwing endless warnings, smartpqi 0000:23:00.0: AMD-Vi: IOMMU mapping error in map_sg (io-pages: 5 reason: -12) Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 swapper/10: page allocation failure: order:0, mode:0xa20(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0,4 Call Trace: <IRQ> dump_stack+0x62/0x9a warn_alloc.cold.43+0x8a/0x148 __alloc_pages_nodemask+0x1a5c/0x1bb0 get_zeroed_page+0x16/0x20 iommu_map_page+0x477/0x540 map_sg+0x1ce/0x2f0 scsi_dma_map+0xc6/0x160 pqi_raid_submit_scsi_cmd_with_io_request+0x1c3/0x470 [smartpqi] do_IRQ+0x81/0x170 common_interrupt+0xf/0xf </IRQ> because the allocation could fail from iommu_map_page(), and the volume of this call could be huge which may generate a lot of serial console output and cosumes all CPUs. Fix it by silencing the warning in this call site, and there is still a dev_err() later to notify the failure. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-30arm64: atomics: Use K constraint when toolchain appears to support itWill Deacon
The 'K' constraint is a documented AArch64 machine constraint supported by GCC for matching integer constants that can be used with a 32-bit logical instruction. Unfortunately, some released compilers erroneously accept the immediate '4294967295' for this constraint, which is later refused by GAS at assembly time. This had led us to avoid the use of the 'K' constraint altogether. Instead, detect whether the compiler is up to the job when building the kernel and pass the 'K' constraint to our 32-bit atomic macros when it appears to be supported. Signed-off-by: Will Deacon <will@kernel.org>
2019-08-30arm64: atomics: Undefine internal macros after useWill Deacon
We use a bunch of internal macros when constructing our atomic and cmpxchg routines in order to save on boilerplate. Avoid exposing these directly to users of the header files. Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-30arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABELWill Deacon
Support for LSE atomic instructions (CONFIG_ARM64_LSE_ATOMICS) relies on a static key to select between the legacy LL/SC implementation which is available on all arm64 CPUs and the super-duper LSE implementation which is available on CPUs implementing v8.1 and later. Unfortunately, when building a kernel with CONFIG_JUMP_LABEL disabled (e.g. because the toolchain doesn't support 'asm goto'), the static key inside the atomics code tries to use atomics itself. This results in a mess of circular includes and a build failure: In file included from ./arch/arm64/include/asm/lse.h:11, from ./arch/arm64/include/asm/atomic.h:16, from ./include/linux/atomic.h:7, from ./include/asm-generic/bitops/atomic.h:5, from ./arch/arm64/include/asm/bitops.h:26, from ./include/linux/bitops.h:19, from ./include/linux/kernel.h:12, from ./include/asm-generic/bug.h:18, from ./arch/arm64/include/asm/bug.h:26, from ./include/linux/bug.h:5, from ./include/linux/page-flags.h:10, from kernel/bounds.c:10: ./include/linux/jump_label.h: In function ‘static_key_count’: ./include/linux/jump_label.h:254:9: error: implicit declaration of function ‘atomic_read’ [-Werror=implicit-function-declaration] return atomic_read(&key->enabled); ^~~~~~~~~~~ [ ... more of the same ... ] Since LSE atomic instructions are not critical to the operation of the kernel, make them depend on JUMP_LABEL at compile time. Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-30arm64: asm: Kill 'asm/atomic_arch.h'Will Deacon
The contents of 'asm/atomic_arch.h' can be split across some of our other 'asm/' headers. Remove it. Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-30arm64: lse: Remove unused 'alt_lse' assembly macroWill Deacon
The 'alt_lse' assembly macro has been unused since 7c8fc35dfc32 ("locking/atomics/arm64: Replace our atomic/lock bitop implementations with asm-generic"). Remove it. Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-30ALSA: hda/realtek - Fix overridden device-specific initializationTakashi Iwai
The recent change to shuffle the codec initialization procedure for Realtek via commit 607ca3bd220f ("ALSA: hda/realtek - EAPD turn on later") caused the silent output on some machines. This change was supposed to be safe, but it isn't actually; some devices have quirk setups to override the EAPD via COEF or BTL in the additional verb table, which is applied at the beginning of snd_hda_gen_init(). And this EAPD setup is again overridden in alc_auto_init_amp(). For recovering from the regression, tell snd_hda_gen_init() not to apply the verbs there by a new flag, then apply the verbs in alc_init(). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204727 Fixes: 607ca3bd220f ("ALSA: hda/realtek - EAPD turn on later") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-30drm/selftests: modes: Add more unit tests for the cmdline parserMaxime Ripard
Let's add some unit tests for the recent bugs we just fixed. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-4-mripard@kernel.org
2019-08-30drm/modes: Introduce a whitelist for the named modesMaxime Ripard
The named modes support has introduced a number of glitches that were in part due to the fact that the parser will take any string as a named mode. Since we shouldn't have a lot of options there (and they should be pretty standard), let's introduce a whitelist of the available named modes so that the kernel can differentiate between a poorly formed command line and a named mode. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-3-mripard@kernel.org
2019-08-30drm/modes: Fix the command line parser to take force options into accountMaxime Ripard
The command line parser when it has been rewritten introduced a regression when the only thing on the command line is an option to force the detection of a connector (such as video=HDMI-A-1:d), which are completely valid. It's been further broken by the support for the named modes which take anything that is not a resolution as a named mode. Let's fix this by running the extra command line option parser on the named modes if they only take a single character. Fixes: e08ab74bd4c7 ("drm/modes: Rewrite the command line parser") Reported-by: Jernej Škrabec <jernej.skrabec@gmail.com> Reported-by: Thomas Graichen <thomas.graichen@googlemail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-2-mripard@kernel.org
2019-08-30drm/modes: Add a switch to differentiate free standing optionsMaxime Ripard
Some extra command line options can be either specified without anything else on the command line (basically all the force connection options), but some other are only relevant when matched with a resolution (margin and interlace). Let's add a switch to restrict if needed the available option set. Fixes: e08ab74bd4c7 ("drm/modes: Rewrite the command line parser") Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-1-mripard@kernel.org
2019-08-30Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"Mario Limonciello
This reverts commit a0085f2510e8976614ad8f766b209448b385492f. This commit has caused regressions in notebooks that support suspend to idle such as the XPS 9360, XPS 9370 and XPS 9380. These notebooks will wakeup from suspend to idle from an unsolicited advertising packet from an unpaired BLE device. In a bug report it was sugggested that this is caused by a generic lack of LE privacy support. Revert this commit until that behavior can be avoided by the kernel. Fixes: a0085f2510e8 ("Bluetooth: btusb: driver to enable the usb-wakeup feature") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=200039 Link: https://marc.info/?l=linux-bluetooth&m=156441081612627&w=2 Link: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/750073/ CC: Bastien Nocera <hadess@hadess.net> CC: Christian Kellner <ckellner@redhat.com> CC: Sukumar Ghorai <sukumar.ghorai@intel.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-30mmc: sdhci-cadence: enable v4_mode to fix ADMA 64-bit addressingMasahiro Yamada
The IP datasheet says this controller is compatible with SD Host Specification Version v4.00. As it turned out, the ADMA of this IP does not work with 64-bit mode when it is in the Version 3.00 compatible mode; it understands the old 64-bit descriptor table (as defined in SDHCI v2), but the ADMA System Address Register (SDHCI_ADMA_ADDRESS) cannot point to the 64-bit address. I noticed this issue only after commit bd2e75633c80 ("dma-contiguous: use fallback alloc_pages for single pages"). Prior to that commit, dma_set_mask_and_coherent() returned the dma address that fits in 32-bit range, at least for the default arm64 configuration (arch/arm64/configs/defconfig). Now the host->adma_addr exceeds the 32-bit limit, causing the real problem for the Socionext SoCs. (As a side-note, I was also able to reproduce the issue for older kernels by turning off CONFIG_DMA_CMA.) Call sdhci_enable_v4_mode() to fix this. Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mmc: sdhci-sprd: clear the UHS-I modes read from registersChunyan Zhang
sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I mode used by the specific card can be selected via devicetree only. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTIONChunyan Zhang
sprd's sd host controller doesn't support detection to card insert or remove. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKENChunyan Zhang
The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on sprd's sd host controller, set quirk2 to disable configuring this. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mmc: sdhci-sprd: add get_ro hook functionChunyan Zhang
sprd's sd host controller doesn't support write protect to sd card. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mmc: sdhci-sprd: fixed incorrect clock dividerChunyan Zhang
The register SDHCI_CLOCK_CONTROL should be cleared before config clock divider, otherwise the frequency configured maybe lower than we expected. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mmc: core: Fix init of SD cards reporting an invalid VDD rangeUlf Hansson
The OCR register defines the supported range of VDD voltages for SD cards. However, it has turned out that some SD cards reports an invalid voltage range, for example having bit7 set. When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from the invalid VDD range, this triggers the core to run a power cycle of the card to try to initialize it at the lowest common supported voltage. Obviously this fails, since the card can't support it. Let's fix this problem, by clearing invalid bits from the read OCR register for SD cards, before proceeding with the VDD voltage negotiation. Cc: stable@vger.kernel.org Reported-by: Philip Langdale <philipl@overt.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Philip Langdale <philipl@overt.org> Tested-by: Philip Langdale <philipl@overt.org> Tested-by: Manuel Presnitz <mail@mpy.de>
2019-08-30Merge tag 'drm-intel-fixes-2019-08-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.3-rc7: - Fix DP MST max BPC property creation after DRM register - Fix unused ggtt deballooning and NULL dereference in guest - Fix DSC eDP transcoder identification - Fix WARN from DMA API debug by setting DMA max segment size Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87a7bseati.fsf@intel.com
2019-08-30Merge tag 'drm-fixes-5.3-2019-08-28' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.3-2019-08-28: amdgpu: - Fix GFXOFF regression for PCO and RV2 - Fix missing fence reference - Fix VG20 power readings on certain SMU firmware versions - Fix dpm level setup for VG20 - Add an ATPX laptop quirk Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190829022925.32678-1-alexander.deucher@amd.com
2019-08-29Merge tag '5.3-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "A few small SMB3 fixes, and a larger one to fix various older string handling functions" * tag '5.3-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: replace various strncpy with strscpy and similar cifs: Use kzfree() to zero out the password cifs: set domainName when a domain-key is used in multiuser
2019-08-30netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorderwenxu
Get the vlan_proto of ingress bridge in network byteorder as userspace expects. Otherwise this is inconsistent with NFT_META_PROTOCOL. Fixes: 2a3a93ef0ba5 ("netfilter: nft_meta_bridge: Add NFT_META_BRI_IIFVPROTO support") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-30Merge tag 'drm-misc-fixes-2019-08-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.3 (rc7?): - Make qxl reservel the vga ports using vgaargb to prevent switching to vga compatibility mode. - Fix omap port lookup for SDI output - Use virtio_max_dma_size to fix an issue with swiotlb. - Compiler fixes to komeda. - Add missing of_node_get() call in komeda. - Reorder the komeda de-init functions. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f187c28b-6279-2c4f-3e53-296ee899133b@linux.intel.com
2019-08-29Merge tag 'mac80211-for-davem-2019-08-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have * one fix for a driver as I'm covering for Kalle while he's on vacation * two fixes for eapol-over-nl80211 work ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29arm64: dts: meson-sm1-sei610: add stdout-path property backNeil Armstrong
The commit d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS") incorrectly removed the chosen node and the stdout-path property. Add these back. Fixes: d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: enable DVFSNeil Armstrong
This enables DVFS for the Amlogic SM1 based SEI610 board by: - Adding the SM1 SoC OPPs taken from the vendor tree - Selecting the SM1 Clock controller instead of the G12A one - Adding the CPU rail regulator, PWM and OPPs for each CPU nodes. Each power supply can achieve 0.69V to 1.05V using a single PWM output clocked at 666KHz with an inverse duty-cycle. DVFS has been tested by running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations of the cpu cluster and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: khadas-vim3: add support for the SM1 based VIM3LNeil Armstrong
Add the Amlogic SM1 based Khadas VIM3L, sharing all the same features as the G12B based VIM3, but: - a different DVFS support since only a single cluster is available - audio is still not available on SM1 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindingsNeil Armstrong
The Khadas VIM3 is also available as VIM3L with the Pin-to-pin compatible Amlogic SM1 SoC in the S905D3 variant package. Change the description to match the S905X3/D3/Y3 variants like the G12A description, and add the khadas,vim3l compatible. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsiNeil Armstrong
To prepare support of the Amlogic SM1 based Khadas VIM3, move the non-G12B specific nodes (all except DVFS and Audio) to a new meson-khadas-vim3.dtsi Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit (git 2.34.1) at 2025-09-14 13:16:23 +0000