| Age | Commit message (Collapse) | Author |
|---|
|
pti_clone_pmds() assumes that the supplied address is either:
- properly PUD/PMD aligned
or
- the address is actually mapped which means that independently
of the mapping level (PUD/PMD/PTE) the next higher mapping
exists.
If that's not the case the unaligned address can be incremented by PUD or
PMD size incorrectly. All callers supply mapped and/or aligned addresses,
but for the sake of robustness it's better to handle that case properly and
to emit a warning.
[ tglx: Rewrote changelog and added WARN_ON_ONCE() ]
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282352470.1938@nanos.tec.linutronix.de
|
|
ftrace does not use text_poke() for enabling trace functionality. It uses
its own mechanism and flips the whole kernel text to RW and back to RO.
The CPA rework removed a loop based check of 4k pages which tried to
preserve a large page by checking each 4k page whether the change would
actually cover all pages in the large page.
This resulted in endless loops for nothing as in testing it turned out that
it actually never preserved anything. Of course testing missed to include
ftrace, which is the one and only case which benefitted from the 4k loop.
As a consequence enabling function tracing or ftrace based kprobes results
in a full 4k split of the kernel text, which affects iTLB performance.
The kernel RO protection is the only valid case where this can actually
preserve large pages.
All other static protections (RO data, data NX, PCI, BIOS) are truly
static. So a conflict with those protections which results in a split
should only ever happen when a change of memory next to a protected region
is attempted. But these conflicts are rightfully splitting the large page
to preserve the protected regions. In fact a change to the protected
regions itself is a bug and is warned about.
Add an exception for the static protection check for kernel text RO when
the to be changed region spawns a full large page which allows to preserve
the large mappings. This also prevents the syslog to be spammed about CPA
violations when ftrace is used.
The exception needs to be removed once ftrace switched over to text_poke()
which avoids the whole issue.
Fixes: 585948f4f695 ("x86/mm/cpa: Avoid the 4k pages check completely")
Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282355340.1938@nanos.tec.linutronix.de
|
|
Make sure interrupt handler i2c_dw_irq_handler_slave() has finished
before clearing the the dev->slave pointer in i2c_dw_unreg_slave().
There is possibility for a race if i2c_dw_irq_handler_slave() is running
on another CPU while clearing the dev->slave pointer.
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reported-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
check_acpi_smo88xx_device() utilizes acpi_get_object_info() which in its turn
allocates a buffer. User is responsible to clean allocated resources. The last
has been missed in the original code. Fix it here.
While here, replace !ACPI_SUCCESS() with ACPI_FAILURE().
Fixes: 19b07cb4a187 ("i2c: i801: Register optional lis3lv02d I2C device on Dell machines")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
We are moving towards returning ERR_PTRs when i2c_new_*_device() calls
fail. Make sure its counterpart for unregistering handles ERR_PTRs as
well.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix fall-through warnings on arc and nds32 for multiple
configurations"
* tag 'Wimplicit-fallthrough-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
nds32: Mark expected switch fall-throughs
ARC: unwind: Mark expected switch fall-through
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fix from Miquel Raynal:
"Add a 'depends on' in the core Hyperbus Kconfig entry to avoid build
errors"
* tag 'mtd/fixes-for-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: hyperbus: fix dependency and build error
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: allmodconfig nds32):
include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/nds32/kernel/signal.c:362:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/nds32/kernel/signal.c:315:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: haps_hs_defconfig arc):
arch/arc/kernel/unwind.c: In function ‘read_pointer’:
./include/linux/compiler.h:328:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
do { \
^
./include/linux/compiler.h:338:2: note: in expansion of macro ‘__compiletime_assert’
__compiletime_assert(condition, msg, prefix, suffix)
^~~~~~~~~~~~~~~~~~~~
./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
^~~~~~~~~~~~~~~~
arch/arc/kernel/unwind.c:573:3: note: in expansion of macro ‘BUILD_BUG_ON’
BUILD_BUG_ON(sizeof(u32) != sizeof(value));
^~~~~~~~~~~~
arch/arc/kernel/unwind.c:575:2: note: here
case DW_EH_PE_native:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
The move of the IXP4xx SoC drivers exposed their config options on all
platforms.
Fix this by wrapping them inside an ARCH_IXP4XX or COMPILE_TEST block.
Link: https://lore.kernel.org/r/20190823090352.12243-1-linus.walleij@linaro.org
Fixes: fcf2d8978cd538a5 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
A single patch to change my MAINTAINERS address
* tag 'sunxi-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
MAINTAINERS: Update my email address
Link: https://lore.kernel.org/r/8c04a96b-4a75-4e1f-b3ac-05fe091f251e.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm/fixes
Hisilicon fixes for v5.3-rc
- Fixed RCU usage in logical PIO
- Added a function to unregister a logical PIO range in logical PIO
to support the fixes in the hisi-lpc driver
- Fixed and optimized hisi-lpc driver to avoid potential use-after-free
and driver unbind crash
* tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi:
bus: hisi_lpc: Add .remove method to avoid driver unbind crash
bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
lib: logic_pio: Add logic_pio_unregister_range()
lib: logic_pio: Avoid possible overlap for unregistering regions
lib: logic_pio: Fix RCU usage
Link: https://lore.kernel.org/r/5D562335.7000902@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We no longer fall back to out-of-line atomics on systems with
CONFIG_ARM64_LSE_ATOMICS where ARM64_HAS_LSE_ATOMICS is not set.
Remove the unused compilation unit which provided these symbols.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that we have removed the out-of-line ll/sc atomics we can give
the compiler the freedom to choose its own register allocation.
Remove the hard-coded use of x30.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When building for LSE atomics (CONFIG_ARM64_LSE_ATOMICS), if the hardware
or toolchain doesn't support it the existing code will fallback to ll/sc
atomics. It achieves this by branching from inline assembly to a function
that is built with special compile flags. Further this results in the
clobbering of registers even when the fallback isn't used increasing
register pressure.
Improve this by providing inline implementations of both LSE and
ll/sc and use a static key to select between them, which allows for the
compiler to generate better atomics code. Put the LL/SC fallback atomics
in their own subsection to improve icache performance.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The noencrypt flag was intended to be set if the "frame was received
unencrypted" according to include/uapi/linux/nl80211.h. However, the
current behavior is opposite of this.
Cc: stable@vger.kernel.org
Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if
mac80211 is configured to do so and forwards the contents over nl80211.
During this process some additional data is also forwarded, including
whether the frame was received encrypted or not. Unfortunately just
prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is
cleared, resulting in incorrect data being exposed over nl80211.
Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0 revisions.
Additionally, instead of having an inclusive check for QnJ devices,
make the selection exclusive, so that switching to QnJ is the
exception, not the default. This prevents us from having to add all
the non-QnJ cards to an exclusion list. To do so, only go into the
QnJ block if the device has an RF ID type HR and HW revision QnJ.
Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If 'fq' qdisc is used and a program has requested timestamps,
skb->tstamp needs to be cleared, else fq will treat these as
'transmit time'.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The A64 ISA accepts distinct (but overlapping) ranges of immediates for:
* add arithmetic instructions ('I' machine constraint)
* sub arithmetic instructions ('J' machine constraint)
* 32-bit logical instructions ('K' machine constraint)
* 64-bit logical instructions ('L' machine constraint)
... but we currently use the 'I' constraint for many atomic operations
using sub or logical instructions, which is not always valid.
When CONFIG_ARM64_LSE_ATOMICS is not set, this allows invalid immediates
to be passed to instructions, potentially resulting in a build failure.
When CONFIG_ARM64_LSE_ATOMICS is selected the out-of-line ll/sc atomics
always use a register as they have no visibility of the value passed by
the caller.
This patch adds a constraint parameter to the ATOMIC_xx and
__CMPXCHG_CASE macros so that we can pass appropriate constraints for
each case, with uses updated accordingly.
Unfortunately prior to GCC 8.1.0 the 'K' constraint erroneously accepted
'4294967295', so we must instead force the use of a register.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On architectures that discard .exit.* sections at runtime, a
warning is printed for each jump label that is used within an
in-kernel __exit annotated function:
can't patch jump_label at ehci_hcd_cleanup+0x8/0x3c
WARNING: CPU: 0 PID: 1 at kernel/jump_label.c:410 __jump_label_update+0x12c/0x138
As these functions will never get executed (they are free'd along
with the rest of initmem) - we do not need to patch them and should
not display any warnings.
The warning is displayed because the test required to satisfy
jump_entry_is_init is based on init_section_contains (__init_begin to
__init_end) whereas the test in __jump_label_update is based on
init_kernel_text (_sinittext to _einittext) via kernel_text_address).
Fixes: 19483677684b ("jump_label: Annotate entries that operate on __init code earlier")
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since the chained quirks via chained_before flag is applied before the
depth check, it may lead to the endless recursive calls, when the
chain were set up incorrectly. Fix it by moving the depth check at
the beginning of the loop.
Fixes: 1f57825077dc ("ALSA: hda - Add chained_before flag to the fixup entry")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
lib/devres.c, which implements devm_ioremap_resource(), is only built
when CONFIG_HAS_IOMEM is set/enabled, so MTD_HYPERBUS should depend
on HAS_IOMEM. Fixes a build error and a Kconfig warning (as seen on
UML builds):
WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS
Depends on [n]: MTD [=m] && HAS_IOMEM [=n]
Selected by [m]:
- MTD_HYPERBUS [=m] && MTD [=m]
ERROR: "devm_ioremap_resource" [drivers/mtd/hyperbus/hyperbus-core.ko] undefined!
Fixes: dcc7d3446a0f ("mtd: Add support for HyperBus memory devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mtd@lists.infradead.org
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
While reading a trace data file that had 100,000s of tasks, the process
took an extremely long time. I profiled it down to add_new_comm(), which
was doing a qsort() call on an array that was pretty much already sorted
(all but the last element. qsort() isn't very efficient when dealing
with mostly sorted arrays, and this definitely showed its issues.
When adding a new task to the task list, instead of using qsort(), do
another bsearch() with a function that will find the element before
where the new task will be inserted in. Then simply shift the rest of
the array, and insert the task where it belongs.
Fixes: f7d82350e597d ("tools/events: Add files to create libtraceevent.a")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191820.127233764@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If the re-allocation of tep->cmdlines succeeds, then the previous
allocation of tep->cmdlines will be freed. If we later fail in
add_new_comm(), we must not free cmdlines, and also should assign
tep->cmdlines to the new allocation. Otherwise when freeing tep, the
tep->cmdlines will be pointing to garbage.
Fixes: a6d2a61ac653a ("tools lib traceevent: Remove some die() calls")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we started using a thread to catch the PERF_RECORD_BPF_EVENT meta
data events to then ask the kernel for further info (BTF, etc) for BPF
programs shortly after they get loaded, we forgot to use
unshare(CLONE_FS) as was done in:
868a832918f6 ("perf top: Support lookup of symbols in other mount namespaces.")
Do it so that we can enter the namespaces to read the build-ids at the
end of a 'perf record' session for the DSOs that had hits.
Before:
Starting a 'stress-ng --cpus 8' inside a container and then, outside the
container running:
# perf record -a --namespaces sleep 5
# perf buildid-list | grep stress-ng
#
We would end up with a 'perf.data' file that had no entry in its
build-id table for the /usr/bin/stress-ng binary inside the container
that got tons of PERF_RECORD_SAMPLEs.
After:
# perf buildid-list | grep stress-ng
f2ed02c68341183a124b9b0f6e2e6c493c465b29 /usr/bin/stress-ng
#
Then its just a matter of making sure that that binary debuginfo package
gets available in a place that 'perf report' will look at build-id keyed
ELF files, which, in my case, on a f30 notebook, was a matter of
installing the debuginfo file for the distro used in the container,
fedora 31:
# rpm -ivh http://fedora.c3sl.ufpr.br/linux/development/31/Everything/x86_64/debug/tree/Packages/s/stress-ng-debuginfo-0.07.29-10.fc31.x86_64.rpm
Then, because perf currently looks for those debuginfo files (richer ELF
symtab) inside that namespace (look at the setns calls):
openat(AT_FDCWD, "/proc/self/ns/mnt", O_RDONLY) = 137
openat(AT_FDCWD, "/proc/13169/ns/mnt", O_RDONLY) = 139
setns(139, CLONE_NEWNS) = 0
stat("/usr/bin/stress-ng", {st_mode=S_IFREG|0755, st_size=3065416, ...}) = 0
openat(AT_FDCWD, "/usr/bin/stress-ng", O_RDONLY) = 140
fcntl(140, F_GETFD) = 0
fstat(140, {st_mode=S_IFREG|0755, st_size=3065416, ...}) = 0
mmap(NULL, 3065416, PROT_READ, MAP_PRIVATE, 140, 0) = 0x7ff2fdc5b000
munmap(0x7ff2fdc5b000, 3065416) = 0
close(140) = 0
stat("stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
stat("/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
stat("/usr/bin/.debug/stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
stat("/usr/lib/debug/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
stat("/root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29", 0x7fff45d711e0) = -1 ENOENT (No such file or directory)
To only then go back to the "host" namespace to look just in the users's
~/.debug cache:
setns(137, CLONE_NEWNS) = 0
chdir("/root") = 0
close(137) = 0
close(139) = 0
stat("/root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf", 0x7fff45d732e0) = -1 ENOENT (No such file or directory)
It continues to fail to resolve symbols:
# perf report | grep stress-ng | head -5
9.50% stress-ng-cpu stress-ng [.] 0x0000000000021ac1
8.58% stress-ng-cpu stress-ng [.] 0x0000000000021ab4
8.51% stress-ng-cpu stress-ng [.] 0x0000000000021489
7.17% stress-ng-cpu stress-ng [.] 0x00000000000219b6
3.93% stress-ng-cpu stress-ng [.] 0x0000000000021478
#
To overcome that we use:
# perf buildid-cache -v --add /usr/lib/debug/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug
Adding f2ed02c68341183a124b9b0f6e2e6c493c465b29 /usr/lib/debug/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug: Ok
#
# ls -la /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf
-rw-r--r--. 3 root root 2401184 Jul 27 07:03 /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf
# file /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf
/root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter \004, BuildID[sha1]=f2ed02c68341183a124b9b0f6e2e6c493c465b29, for GNU/Linux 3.2.0, with debug_info, not stripped, too many notes (256)
#
Now it finally works:
# perf report | grep stress-ng | head -5
23.59% stress-ng-cpu stress-ng [.] ackermann
23.33% stress-ng-cpu stress-ng [.] is_prime
17.36% stress-ng-cpu stress-ng [.] stress_cpu_sieve
6.08% stress-ng-cpu stress-ng [.] stress_cpu_correlate
3.55% stress-ng-cpu stress-ng [.] queens_try
#
I'll make sure that it looks for the build-id keyed files in both the
"host" namespace (the namespace the user running 'perf record' was a the
time of the recording) and in the container namespace, as it shouldn't
matter where a content based key lookup finds the ELF file to use in
resolving symbols, etc.
Reported-by: Karl Rister <krister@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Fixes: 657ee5531903 ("perf evlist: Introduce side band thread")
Link: https://lkml.kernel.org/n/tip-g79k0jz41adiaeuqud742t2l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So it's available for libperf's users.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So it's available for libperf's users.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_COMPRESSED event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_HEADER_FEATURE event definition to libperf's
event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_TIME_CONV event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_STAT_ROUND event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_STAT event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_STAT_CONFIG event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_THREAD_MAP event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_SWITCH event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf/event.h
Move the PERF_RECORD_ITRACE_START event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_AUX event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf/event.h
Move the PERF_RECORD_AUXTRACE_ERROR event definition to libperf's
event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the PERF_RECORD_AUXTRACE event definition to libperf's event.h.
Ipn order to keep libperf simple, we switch 'u64/u32/u16/u8'
types used events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf/event.h
Move the PERF_RECORD_AUXTRACE_INFO event definition to libperf's
event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-9-jolsa@kernel.org
[ Fix cs_etm__print_auxtrace_info() arg to be __u64 too to fix the CORESIGHT=1 build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The state tracking changes broke the expiry active check by not writing to
it and instead sitting timers_active, which is already set.
That's not a big issue as the actual expiry is protected by sighand lock,
so concurrent handling is not possible. That means that the second task
which invokes that function executes the expiry code for nothing.
Write to the proper flag.
Also add a check whether the flag is set into check_process_timers(). That
check had been missing in the code before the rework already. The check for
another task handling the expiry of process wide timers was only done in
the fastpath check. If the fastpath check returns true because a per task
timer expired, then the checking of process wide timers was done in
parallel which is as explained above just a waste of cycles.
Fixes: 244d49e30653 ("posix-cpu-timers: Move state tracking to struct posix_cputimers")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
|
|
The ingenic driver supports DPI panels only at the moment, so hardcode
their type to DPI instead of Unknown.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823212353.29369-1-laurent.pinchart@ideasonboard.com
# *** extracted tags ***
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The rework of the posix-cpu-timers patch series dropped the empty
declaration of struct cpu_timer for the CONFIG_POSIX_TIMERS=n case which
causes the build to fail:
./include/linux/posix-timers.h:218:20: error: field 'cpu' has incomplete type
Add it back.
Fixes: 60bda037f1dd ("posix-cpu-timers: Utilize timerqueue for storage")
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
A similar workaround for the suspend/resume problem is needed for yet
another ASUS machines, P6X models. Like the previous fix, the BIOS
doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_*
entries are used instead.
Reported-and-tested-by: SteveM <swm@swm1.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
nfp: flower: fix bugs in merge tunnel encap code
John says:
There are few bugs in the merge encap code that have come to light with
recent driver changes. Effectively, flow bind callbacks were being
registered twice when using internal ports (new 'busy' code triggers
this). There was also an issue with neighbour notifier messages being
ignored for internal ports.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent code changes to NFP allowed the offload of neighbour entries to FW
when the next hop device was an internal port. This allows for offload of
tunnel encap when the end-point IP address is applied to such a port.
Unfortunately, the neighbour event handler still rejects events that are
not associated with a repr dev and so the firmware neighbour table may get
out of sync for internal ports.
Fix this by allowing internal port neighbour events to be correctly
processed.
Fixes: 45756dfedab5 ("nfp: flower: allow tunnels to output to internal port")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Internal port TC offload is implemented through user-space applications
(such as OvS) by adding filters at egress via TC clsact qdiscs. Indirect
block offload support in the NFP driver accepts both ingress qdisc binds
and egress binds if the device is an internal port. However, clsact sends
bind notification for both ingress and egress block binds which can lead
to the driver registering multiple callbacks and receiving multiple
notifications of new filters.
Fix this by rejecting ingress block bind callbacks when the port is
internal and only adding filter callbacks for egress binds.
Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hayes Wang says:
====================
r8152: fix side effect
v3:
Update the commit message for patch #1.
v2:
Replace patch #2 with "r8152: remove calling netif_napi_del".
v1:
The commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect")
add a check to avoid using napi_disable after netif_napi_del. However,
the commit ffa9fec30ca0 ("r8152: set RTL8152_UNPLUG only for real
disconnection") let the check useless.
Therefore, I revert commit 0ee1f4734967 ("r8152: napi hangup fix
after disconnect") first, and add another patch to fix it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
