| Age | Commit message (Collapse) | Author |
|---|
|
The commit 3e5903eb9cff70730 ("vsprintf: Prevent crash when dereferencing
invalid pointers") broke boot on several architectures. The common
pattern is that probe_kernel_read() is not working during early
boot because userspace access framework is not ready.
It is a generic problem. We have to avoid any complex external
functions in vsprintf() code, especially in the common path.
They might break printk() easily and are hard to debug.
Replace probe_kernel_read() with some simple checks for obvious
problems.
Details:
1. Report on Power:
Kernel crashes very early during boot with with CONFIG_PPC_KUAP and
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG
The problem is the combination of some new code called via printk(),
check_pointer() which calls probe_kernel_read(). That then calls
allow_user_access() (PPC_KUAP) and that uses mmu_has_feature() too early
(before we've patched features). With the JUMP_LABEL debug enabled that
causes us to call printk() & dump_stack() and we end up recursing and
overflowing the stack.
Because it happens so early you don't get any output, just an apparently
dead system.
The stack trace (which you don't see) is something like:
...
dump_stack+0xdc
probe_kernel_read+0x1a4
check_pointer+0x58
string+0x3c
vsnprintf+0x1bc
vscnprintf+0x20
printk_safe_log_store+0x7c
printk+0x40
dump_stack_print_info+0xbc
dump_stack+0x8
probe_kernel_read+0x1a4
probe_kernel_read+0x19c
check_pointer+0x58
string+0x3c
vsnprintf+0x1bc
vscnprintf+0x20
vprintk_store+0x6c
vprintk_emit+0xec
vprintk_func+0xd4
printk+0x40
cpufeatures_process_feature+0xc8
scan_cpufeatures_subnodes+0x380
of_scan_flat_dt_subnodes+0xb4
dt_cpu_ftrs_scan_callback+0x158
of_scan_flat_dt+0xf0
dt_cpu_ftrs_scan+0x3c
early_init_devtree+0x360
early_setup+0x9c
2. Report on s390:
vsnprintf invocations, are broken on s390. For example, the early boot
output now looks like this where the first (efault) should be
the linux_banner:
[ 0.099985] (efault)
[ 0.099985] setup: Linux is running as a z/VM guest operating system in 64-bit mode
[ 0.100066] setup: The maximum memory size is 8192MB
[ 0.100070] cma: Reserved 4 MiB at (efault)
[ 0.100100] numa: NUMA mode: (efault)
The reason for this, is that the code assumes that
probe_kernel_address() works very early. This however is not true on
at least s390. Uaccess on KERNEL_DS works only after page tables have
been setup on s390, which happens with setup_arch()->paging_init().
Any probe_kernel_address() invocation before that will return -EFAULT.
Fixes: 3e5903eb9cff70730 ("vsprintf: Prevent crash when dereferencing invalid pointers")
Link: http://lkml.kernel.org/r/20190510084213.22149-1-pmladek@suse.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: "Tobin C . Harding" <me@tobin.cc>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Russell Currey <ruscur@russell.cc>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Stephen Rothwell <sfr@ozlabs.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly delayed due to the issue with printk() calling
probe_kernel_read() interacting with our new user access prevention
stuff, but all fixed now.
The only out-of-area changes are the addition of a cpuhp_state, small
additions to Documentation and MAINTAINERS updates.
Highlights:
- Support for Kernel Userspace Access/Execution Prevention (like
SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents
the kernel from accidentally accessing userspace outside
copy_to/from_user(), or ever executing userspace.
- KASAN support on 32-bit.
- Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to
use the same address ranges we use with the Radix MMU.
- A rewrite into C of large parts of our idle handling code for
64-bit Book3S (ie. power8 & power9).
- A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup
in the null_syscall benchmark.
- On 64-bit bare metal we have support for recovering from errors
with the time base (our clocksource), however if that fails
currently we hang in __delay() and never crash. We now have support
for detecting that case and short circuiting __delay() so we at
least panic() and reboot.
- Add support for optionally enabling the DAWR on Power9, which had
to be disabled by default due to a hardware erratum. This has the
effect of enabling hardware breakpoints for GDB, the downside is a
badly behaved program could crash the machine by pointing the DAWR
at cache inhibited memory. This is opt-in obviously.
- xmon, our crash handler, gets support for a read only mode where
operations that could change memory or otherwise disturb the system
are disabled.
Plus many clean-ups, reworks and minor fixes etc.
Thanks to: Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey
Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar,
Anton Blanchard, Ben Hutchings, Bo YU, Breno Leitao, Cédric Le Goater,
Christopher M. Riedl, Christoph Hellwig, Colin Ian King, David Gibson,
Ganesh Goudar, Gautham R. Shenoy, George Spelvin, Greg Kroah-Hartman,
Greg Kurz, Horia Geantă, Jagadeesh Pagadala, Joel Stanley, Joe
Perches, Julia Lawall, Laurentiu Tudor, Laurent Vivier, Lukas Bulwahn,
Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael
Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch, Nicholas Piggin,
Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi
Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith,
Sukadev Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler,
Valentin Schneider, Wei Yongjun, Wen Yang, YueHaibing"
* tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (205 commits)
powerpc/64s: Use early_mmu_has_feature() in set_kuap()
powerpc/book3s/64: check for NULL pointer in pgd_alloc()
powerpc/mm: Fix hugetlb page initialization
ocxl: Fix return value check in afu_ioctl()
powerpc/mm: fix section mismatch for setup_kup()
powerpc/mm: fix redundant inclusion of pgtable-frag.o in Makefile
powerpc/mm: Fix makefile for KASAN
powerpc/kasan: add missing/lost Makefile
selftests/powerpc: Add a signal fuzzer selftest
powerpc/booke64: set RI in default MSR
ocxl: Provide global MMIO accessors for external drivers
ocxl: move event_fd handling to frontend
ocxl: afu_irq only deals with IRQ IDs, not offsets
ocxl: Allow external drivers to use OpenCAPI contexts
ocxl: Create a clear delineation between ocxl backend & frontend
ocxl: Don't pass pci_dev around
ocxl: Split pci.c
ocxl: Remove some unused exported symbols
ocxl: Remove superfluous 'extern' from headers
ocxl: read_pasid never returns an error, so make it void
...
|
|
Avoid calling cgroup_threadgroup_change_end() without having called
cgroup_threadgroup_change_begin() first.
During process creation we need to check whether the cgroup we are in
allows us to fork. To perform this check the cgroup needs to guard itself
against threadgroup changes and takes a lock.
Prior to CLONE_PIDFD the cleanup target "bad_fork_free_pid" would also need
to call cgroup_threadgroup_change_end() because said lock had already been
taken.
However, this is not the case anymore with the addition of CLONE_PIDFD. We
are now allocating a pidfd before we check whether the cgroup we're in can
fork and thus prior to taking the lock. So when copy_process() fails at the
right step it would release a lock we haven't taken.
This bug is not even very subtle to be honest. It's just not very clear
from the naming of cgroup_threadgroup_change_{begin,end}() that a lock is
taken.
Here's the relevant splat:
entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7fec849
Code: 85 d2 74 02 89 0a 5b 5d c3 8b 04 24 c3 8b 14 24 c3 8b 3c 24 c3 90 90
90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90
90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000ffed5a8c EFLAGS: 00000246 ORIG_RAX: 0000000000000078
RAX: ffffffffffffffda RBX: 0000000000003ffc RCX: 0000000000000000
RDX: 00000000200005c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(depth <= 0)
WARNING: CPU: 1 PID: 7744 at kernel/locking/lockdep.c:4052 __lock_release
kernel/locking/lockdep.c:4052 [inline]
WARNING: CPU: 1 PID: 7744 at kernel/locking/lockdep.c:4052
lock_release+0x667/0xa00 kernel/locking/lockdep.c:4321
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 7744 Comm: syz-executor007 Not tainted 5.1.0+ #4
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
panic+0x2cb/0x65c kernel/panic.c:214
__warn.cold+0x20/0x45 kernel/panic.c:566
report_bug+0x263/0x2b0 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:179 [inline]
fixup_bug arch/x86/kernel/traps.c:174 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:972
RIP: 0010:__lock_release kernel/locking/lockdep.c:4052 [inline]
RIP: 0010:lock_release+0x667/0xa00 kernel/locking/lockdep.c:4321
Code: 0f 85 a0 03 00 00 8b 35 77 66 08 08 85 f6 75 23 48 c7 c6 a0 55 6b 87
48 c7 c7 40 25 6b 87 4c 89 85 70 ff ff ff e8 b7 a9 eb ff <0f> 0b 4c 8b 85
70 ff ff ff 4c 89 ea 4c 89 e6 4c 89 c7 e8 52 63 ff
RSP: 0018:ffff888094117b48 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 1ffff11012822f6f RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815af236 RDI: ffffed1012822f5b
RBP: ffff888094117c00 R08: ffff888092bfc400 R09: fffffbfff113301d
R10: fffffbfff113301c R11: ffffffff889980e3 R12: ffffffff8a451df8
R13: ffffffff8142e71f R14: ffffffff8a44cc80 R15: ffff888094117bd8
percpu_up_read.constprop.0+0xcb/0x110 include/linux/percpu-rwsem.h:92
cgroup_threadgroup_change_end include/linux/cgroup-defs.h:712 [inline]
copy_process.part.0+0x47ff/0x6710 kernel/fork.c:2222
copy_process kernel/fork.c:1772 [inline]
_do_fork+0x25d/0xfd0 kernel/fork.c:2338
__do_compat_sys_x86_clone arch/x86/ia32/sys_ia32.c:240 [inline]
__se_compat_sys_x86_clone arch/x86/ia32/sys_ia32.c:236 [inline]
__ia32_compat_sys_x86_clone+0xbc/0x140 arch/x86/ia32/sys_ia32.c:236
do_syscall_32_irqs_on arch/x86/entry/common.c:334 [inline]
do_fast_syscall_32+0x281/0xd54 arch/x86/entry/common.c:405
entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7fec849
Code: 85 d2 74 02 89 0a 5b 5d c3 8b 04 24 c3 8b 14 24 c3 8b 3c 24 c3 90 90
90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90
90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000ffed5a8c EFLAGS: 00000246 ORIG_RAX: 0000000000000078
RAX: ffffffffffffffda RBX: 0000000000003ffc RCX: 0000000000000000
RDX: 00000000200005c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..
Reported-and-tested-by: syzbot+3286e58549edc479faae@syzkaller.appspotmail.com
Fixes: b3e583825266 ("clone: add CLONE_PIDFD")
Signed-off-by: Christian Brauner <christian@brauner.io>
|
|
Standards such as the MIPI DisCo for SoundWire 1.0 specification
assume the _ADR field is 64 bits.
_ADR is defined as an "Integer" represented as 64 bits since ACPI 2.0
released in 2002. The low levels already use _ADR as 64 bits, e.g. in
struct acpi_device_info.
This patch bumps the representation used for sysfs to 64 bits. To
avoid any compatibility/ABI issues, the printf format is only extended
to 16 characters when the actual _ADR value exceeds the 32 bit
maximum.
Example with a SoundWire device, the results show the complete
vendorID and linkID which were omitted before:
Before:
$ more /sys/bus/acpi/devices/device\:38/adr
0x5d070000
After:
$ more /sys/bus/acpi/devices/device\:38/adr
0x000010025d070000
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[ rjw: Replace 0xFFFFFFFF with U32_MAX, clean up subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, the notifiers are called once for each CPU of the policy->cpus
cpumask. It would be more optimal if the notifier can be called only
once and all the relevant information be provided to it. Out of the 23
drivers that register for the transition notifiers today, only 4 of them
do per-cpu updates and the callback for the rest can be called only once
for the policy without any impact.
This would also avoid multiple function calls to the notifier callbacks
and reduce multiple iterations of notifier core's code (which does
locking as well).
This patch adds pointer to the cpufreq policy to the struct
cpufreq_freqs, so the notifier callback has all the information
available to it with a single call. The five drivers which perform
per-cpu updates are updated to use the cpufreq policy. The freqs->cpu
field is redundant now and is removed.
Acked-by: David S. Miller <davem@davemloft.net> (sparc)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Ignore the pidfd-metadata binary so it doesn't show up in unwanted
scenarios.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <christian@brauner.io>
|
|
Realtek codec driver applied the COEF setups to change the EAPD
control to the default mode (i.e. control by EPAD verbs) at the init
callback. It works, but this is too excessive at the same time, since
it's called at each runtime PM resume. That is, the initialization
should be done only once after the probe. One may think that moving
this to the probe should be OK, but no -- there is a catch; when a
system resumes from S4 (hibernation), we need to re-initialize this
again manually, because it's out of regcache restoration.
This patch addresses the issue by introducing alc_pre_init() function
that performs such a task. This is called from each codec probe
function, and it's called from the resume callback conditionally only
from S4 resume.
Reported-and-tested-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Dell platform with ALC298.
system enter to runtime suspend. Headphone had noise.
Let Headset Mic not shutup will solve this issue.
[ Fixed minor coding style issues by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit b9c273babce7 ("PM / arch: x86: MSR_IA32_ENERGY_PERF_BIAS sysfs
interface") caused kernels built with CONFIG_PM unset to crash on
systems supporting the Performance and Energy Bias Hint (EPB),
because it attempts to add files to sysfs directories that don't
exist on those systems.
Prevent that from happening by taking CONFIG_PM into account so
that the code depending on it is not compiled at all when it is
not set.
Fixes: b9c273babce7 ("PM / arch: x86: MSR_IA32_ENERGY_PERF_BIAS sysfs interface")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch adds pinctrl/GPIO driver for STMicroelectronics
Multi-Function eXpander (STMFX) GPIO expander.
STMFX is an I2C slave controller, offering up to 24 GPIOs.
The driver relies on generic pin config interface to configure the GPIOs.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This patch adds documentation of device tree bindings for the
STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
STMicroelectronics Multi-Function eXpander (STMFX) is a slave controller
using I2C for communication with the main MCU. Main features are:
- 16 fast GPIOs individually configurable in input/output
- 8 alternate GPIOs individually configurable in input/output when other
STMFX functions are not used
- Main MCU IDD measurement
- Resistive touchscreen controller
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This patch adds documentation of device tree bindings for the
STMicroelectronics Multi-Function eXpander (STMFX) MFD core.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
On Intel Westmere, a cmdline as follows:
$ perf record -e cpu/event=0xc4,umask=0x2,name=br_inst_retired.near_call/p ....
was failing. Yet the event+ umask support PEBS.
It turns out this is due to a bug in the the PEBS event constraint table for
westmere. All forms of BR_INST_RETIRED.* support PEBS. Therefore the constraint
mask should ignore the umask. The name of the macro INTEL_FLAGS_EVENT_CONSTRAINT()
hint that this is the case but it was not. That macros was checking both the
event code and event umask. Therefore, it was only matching on 0x00c4.
There are code+umask macros, they all have *UEVENT*.
This bug fixes the issue by checking only the event code in the mask.
Both single and range version are modified.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/20190509214556.123493-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
into drm-next
- Fix a crash on gpu reset at driver load time
- ATPX hotplug fix for when the dGPU is powered off
- PLL fix for r5xx asics
- SR-IOV fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509230017.3566-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Two fixes for the freshly enabled semaphore ordering code
- Includes gvt-next-fixes-2019-05-07
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509100109.GA14820@jlahtine-desk.ger.corp.intel.com
|
|
Pull vfs mount fix from Al Viro:
"Fix for umount -l/mount --move race caught by syzbot yesterday..."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_move_mount(): fix an unsafe use of is_anon_ns()
|
|
Pull networking fixes from David Miller:
"Several bug fixes, many are quick merge-window regression cures:
- When NLM_F_EXCL is not set, allow same fib rule insertion. From
Hangbin Liu.
- Several cures in sja1105 DSA driver (while loop exit condition fix,
return of negative u8, etc.) from Vladimir Oltean.
- Handle tx/rx delays in realtek PHY driver properly, from Serge
Semin.
- Double free in cls_matchall, from Pieter Jansen van Vuuren.
- Disable SIOCSHWTSTAMP in macvlan/vlan containers, from Hangbin Liu.
- Endainness fixes in aqc111, from Oliver Neukum.
- Handle errors in packet_init properly, from Haibing Yue.
- Various W=1 warning fixes in kTLS, from Jakub Kicinski"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits)
nfp: add missing kdoc
net/tls: handle errors from padding_length()
net/tls: remove set but not used variables
docs/btf: fix the missing section marks
nfp: bpf: fix static check error through tightening shift amount adjustment
selftests: bpf: initialize bpf_object pointers where needed
packet: Fix error path in packet_init
net/tcp: use deferred jump label for TCP acked data hook
net: aquantia: fix undefined devm_hwmon_device_register_with_info reference
aqc111: fix double endianness swap on BE
aqc111: fix writing to the phy on BE
aqc111: fix endianness issue in aqc111_change_mtu
vlan: disable SIOCSHWTSTAMP in container
macvlan: disable SIOCSHWTSTAMP in container
tipc: fix hanging clients using poll with EPOLLOUT flag
tuntap: synchronize through tfiles array instead of tun->numqueues
tuntap: fix dividing by zero in ebpf queue selection
dwmac4_prog_mtl_tx_algorithms() missing write operation
ptp_qoriq: fix NULL access if ptp dt node missing
net/sched: avoid double free on matchall reoffload
...
|
|
Bridge ASIC is widely used in different SGI systems, but the connected
chipset is either HUB, HEART or BEDROCK. This commit switches to
irq domain hierarchy for hub and bridge interrupts to get bridge
setup out of hub interrupt code.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
[paul.burton@mips.com:
Resolve conflict with commit 69a07a41d908 ("MIPS: SGI-IP27: rework HUB
interrupts").]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
|
|
Add missing kdoc for app member.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Converted bridge code to a platform driver using the PCI generic driver
framework and use adding platform devices during xtalk scan. This allows
easier sharing bridge driver for other SGI platforms like IP30 (Octane) and
IP35 (Origin 3k, Fuel, Tezro).
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
[paul.burton@mips.com:
- Leave __phys_to_dma(), __dma_to_phys() & pcibus_to_node() in
arch/mips/pci/pci-ip27.c since the motivation for moving them
disappeared when the driver stopped being moved to drivers/pci.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
|
|
The config0 register in the Xburst CPUs with a processor ID of
PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
but they don't actually support this ISA.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: od@zcrc.me
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
|
|
arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event':
arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable]
struct perf_event *event = container_of(evt, struct perf_event, hw);
^~~~~
Fix this by making use of IS_ENABLED() to simplify the code and avoid
unnecessary ifdefery.
Fixes: 84002c88599d ("MIPS: perf: Fix perf with MT counting other threads")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.18+
|
|
Jakub Kicinski says:
====================
net/tls: fix W=1 build warnings
This small series cleans up two outstanding W=1 build
warnings in tls code. Both are set but not used variables.
The first case looks fairly straightforward. In the second
I think it's better to propagate the error code, even if
not doing some does not lead to a crash with current code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At the time padding_length() is called the record header
is still part of the message. If malicious TLS 1.3 peer
sends an all-zero record padding_length() will stop at
the record header, and return full length of the data
including the tail_size.
Subsequent subtraction of prot->overhead_size from rxm->full_len
will cause rxm->full_len to turn negative. skb accessors,
however, will always catch resulting out-of-bounds operation,
so in practice this fix comes down to returning the correct
error code. It also fixes a set but not used warning.
This code was added by commit 130b392c6cd6 ("net: tls: Add tls 1.3 support").
CC: Dave Watson <davejwatson@fb.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 4504ab0e6eb8 ("net/tls: Inform user space about send buffer availability")
made us report write_space regardless whether partial record
push was successful or not. Remove the now unused return value
to clean up the following W=1 warning:
net/tls/tls_device.c: In function ‘tls_device_write_space’:
net/tls/tls_device.c:546:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc = 0;
^~
CC: Vakul Garg <vakul.garg@nxp.com>
CC: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2019-05-09
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) three small fixes from Gary, Jiong and Lorenz.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The section titles of 3.4 and 3.5 are not marked correctly.
Signed-off-by: Gary Lin <glin@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
NFP shift instruction has something special. If shift direction is left
then shift amount of 1 to 31 is specified as 32 minus the amount to shift.
But no need to do this for indirect shift which has shift amount be 0. Even
after we do this subtraction, shift amount 0 will be turned into 32 which
will eventually be encoded the same as 0 because only low 5 bits are
encoded, but shift amount be 32 will fail the FIELD_PREP check done later
on shift mask (0x1f), due to 32 is out of mask range. Such error has been
observed when compiling nfp/bpf/jit.c using gcc 8.3 + O3.
This issue has started when indirect shift support added after which the
incoming shift amount to __emit_shf could be 0, therefore it is at that
time shift amount adjustment inside __emit_shf should have been tightened.
Fixes: 991f5b3651f6 ("nfp: bpf: support logic indirect shifts (BPF_[L|R]SH | BPF_X)")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Pablo Cascón <pablo.cascon@netronome.com
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There are a few tests which call bpf_object__close on uninitialized
bpf_object*, which may segfault. Explicitly zero-initialise these pointers
to avoid this.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In case we need to use them for GPU reset prior initializing the
asic. Fixes a crash if the driver attempts to reset the GPU at driver
load time.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Instead of the closest reference divider prefer the lowest,
this fixes flickering issues on HP Compaq nx9420.
Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=108514
Suggested-by: Paul Dufresne <dufresnep@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Pull sparc updates from David Miller:
"Here we go:
- Fix various long standing issues in the sparc 32-bit IOMMU support
code, from Christoph Hellwig.
- Various other code cleanups and simplifications all over. From
Gustavo A. R. Silva, Jagadeesh Pagadala, Masahiro Yamada, Mauro
Carvalho Chehab, Mike Rapoport"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: simplify reduce_memory() function
sparc: use struct_size() in kzalloc()
docs: sparc: convert to ReST
sparc/iommu: merge iommu_get_one and __sbus_iommu_map_page
sparc/iommu: use __sbus_iommu_map_page to implement the map_sg path
sparc/iommu: fix __sbus_iommu_map_page for highmem pages
sparc/iommu: move per-page flushing into __sbus_iommu_map_page
sparc/iommu: pass a physical address to iommu_get_one
sparc/iommu: create a common helper for map_sg
sparc/iommu: merge iommu_release_one and sbus_iommu_unmap_page
sparc/iommu: use sbus_iommu_unmap_page in sbus_iommu_unmap_sg
sparc/iommu: use !PageHighMem to check if a page has a kernel mapping
sparc: vdso: add FORCE to the build rule of %.so
arch:sparc:kernel/uprobes.c : Remove duplicate header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk framework updates from Stephen Boyd:
"We have a couple new features and changes in the core clk framework
this time around because we've finally gotten around to fixing some
long standing issues. There's still work to do though, so this pull
request is largely laying down the foundation for all the driver
changes to come in the next merge window.
The first problem we're alleviating is how parents of clks are
specified. With the new method, we should see lots of drivers migrate
away from the current design of string comparisons on the entire clk
tree to a more direct method where they can use clk_hw pointers or
more localized names specified in DT or via clkdev. This should reduce
our reliance on string comparisons for all the topology description
logic that we've been using for years and hopefully speed some things
up while avoiding problems we have with generating clk names.
Beyond that we also got rid of the CLK_IS_BASIC flag because it wasn't
really helping anyone and we introduced big-endian versions of the
basic clk types so that we can get rid of clk_{readl,writel}(). Both
of these are things that driver developers have tried to use over the
years that I typically bat away during code reviews because they're
not useful. It's great to see these two things go away so maintainers
can save time not worrying about these things.
On the driver side we got the usual collection of new SoC support and
non-critical fixes and updates to existing code. The big topics that
stand out are the new driver support for Mediatek MT8183 and MT8516
SoCs, Amlogic Meson8b and G12a SoCs, and the SiFive FU540 SoC. The
other patches in the driver pile are mostly fixes for things that are
being used for the first time or additions for clks that couldn't be
tested before because there wasn't a consumer driver that exercised
them. Details are below and also in the sub-maintainer tags.
Core:
- Remove clk_readl() and introduce BE versions of basic clk types
- Rewrite how clk parents can be specified to allow DT/clkdev lookups
- Removal of the CLK_IS_BASIC clk flag
- Framework documentation updates and fixes
New Drivers:
- Support for STM32F769
- AT91 sam9x60 PMC support
- SiFive FU540 PRCI and PLL support
- Qualcomm QCS404 CDSP clk support
- Qualcomm QCS404 Turing clk support
- Mediatek MT8183 clock support
- Mediatek MT8516 clock support
- Milbeaut M10V clk controller support
- Support for Cirrus Logic Lochnagar clks
Updates:
- Rework AT91 sckc DT bindings
- Fix slow RC oscillator issue on sama5d3
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs
- Various static analysis fixes/finds and const markings
- Video Engine (ECLK) support on Aspeed SoCs
- Xilinx ZynqMP Versal platform support
- Convert Xilinx ZynqMP driver to be struct oriented
- Fixes for Rockchip rk3328 and rk3288 SoCs
- Sub-type for Rockchip SoCs where mux and divider aren't a single register
- Remove SNVS clock from i.MX7UPL clock driver and bindings
- Improve i.MX5 clock driver for i.MX50 support
- Addition of ADC clock definition for Exynos 5410 SoC (Odroid XU)
- Export a new clock for the MBUS controller on the A13
- Allwinner H6 fixes to support a finer clocking of the video and VPU engines
- Add g12a support in the Amlogic axg audio clock controller
- Add missing PCI USB clock on Rensas RZ/N1
- Add Z2 (Cortex-A53) clocks on Rensas R-Car E3 and RZ/G2E
- A new helper DIV64_U64_ROUND_CLOSEST() in <linux/math64.h>
- VPU and Video Decoder clocks on Amlogic Meson8b
- Finally remove the wrong ABP Meson8b clock id
- Add Video Decoder, PCIe PLL, and CPU Clocks on Amlogic G12A
- Re-expose SAR_ADC_SEL and CTS_OSCIN on Amlogic G12A AO clock controller
- Un-expose some Amlogic AXG-Audio input clocks IDs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits)
clk: Cache core in clk_fetch_parent_index() without names
clk: imx: correct pfdv2 gate_bit/vld_bit operations
clk: sifive: add a driver for the SiFive FU540 PRCI IP block
clk: analogbits: add Wide-Range PLL library
clk: imx: clk-pllv3: mark expected switch fall-throughs
clk: imx8mq: Add dsi_ipg_div
clk: imx: pllv4: add fractional-N pll support
clk: sunxi-ng: Use the correct style for SPDX License Identifier
clk: sprd: Use the correct style for SPDX License Identifier
clk: renesas: Use the correct style for SPDX License Identifier
clk: qcom: Use the correct style for SPDX License Identifier
clk: davinci: Use the correct style for SPDX License Identifier
clk: actions: Use the correct style for SPDX License Identifier
clk: imx: keep uart clock on during system boot
clk: imx: correct i.MX7D AV PLL num/denom offset
dt-bindings: clk: add documentation for the SiFive PRCI driver
clk: stm32mp1: Add ddrperfm clock
clk: Remove CLK_IS_BASIC clk flag
clock: milbeaut: Add Milbeaut M10V clock controller
dt-bindings: clock: milbeaut: add Milbeaut clock description
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A huge series from me this cycle. I went through many drivers to set
the date and time range supported by the RTC which helps solving HW
limitation when the time comes (as early as next year for some). This
time, I focused on drivers using .set_mms and .set_mmss64, allowing me
to remove those callbacks. About a third of the patches got reviews, I
actually own the RTCs and I tested another third and the remaining one
are unlikely to cause any issues.
Other than that, a single new driver and the usual fixes here and there.
Summary:
Subsystem:
- set_mmss and set_mmss64 rtc_ops removal
- Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900
- Use SPDX identifier for the core
- validate upper bound of tm->tm_year
New driver:
- Aspeed BMC SoC RTC
Drivers:
- abx80x: use rtc_add_group
- ds3232: nvram support
- pcf85063: add alarm, nvram, offset correction and microcrystal
rv8263 support
- x1205: add of_match_table
- Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331,
digicolor, ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx,
mxc, pcap, stmp3xxx, test, wm831x, xgene.
- Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor,
dm355evm, ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx,
mc13xxx, mv, mxc, omap, pcap, pcf85063, pcf85363, ps3, sh,
stmp3xxx, sun4v, tegra, wm831x, xgene.
- Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that
properly set the RTC range.
- Use dev_get_drvdata instead of multiple indirections"
* tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (177 commits)
rtc: snvs: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
rtc: imxdi: remove unused variable
rtc: drop set_mms and set_mmss64
rtc: pcap: convert to SPDX identifier
rtc: pcap: use .set_time
rtc: pcap: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: pcap: set range
rtc: digicolor: convert to SPDX identifier
rtc: digicolor: use .set_time
rtc: digicolor: set range
rtc: digicolor: fix possible race condition
rtc: jz4740: convert to SPDX identifier
rtc: jz4740: rework invalid time detection
rtc: jz4740: use dev_pm_set_wake_irq() to simplify code
rtc: jz4740: use .set_time
rtc: jz4740: remove useless check
rtc: jz4740: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: jz4740: set range
rtc: 88pm860x: prevent use-after-free on device remove
rtc: Use dev_get_drvdata()
...
|
|
MY_NAME is only used once and offers no benefit, so remove it.
Link: https://lore.kernel.org/lkml/20190509141456.223614-11-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
PCIE_MODULE_NAME is only used once and offers no benefit, so remove it.
Link: https://lore.kernel.org/lkml/20190509141456.223614-10-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
Replace the last uses of dbg() with the equivalent pr_debug(), then remove
unused dbg(), err(), info(), and warn() wrappers.
Link: https://lore.kernel.org/lkml/20190509141456.223614-9-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
Log messages with pci_dev, not pcie_device. Factor out common message
prefixes with dev_fmt().
Example output change:
- pciehp 0000:00:06.0:pcie004: Slot(0) Powering on due to button press
+ pcieport 0000:00:06.0: pciehp: Slot(0) Powering on due to button press
Link: https://lore.kernel.org/lkml/20190509141456.223614-8-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
Previously pciehp debug messages were enabled by the pciehp_debug module
parameter, e.g., by booting with this kernel command line option:
pciehp.pciehp_debug=1
Convert this mechanism to use the generic dynamic debug (dyndbg) feature.
After this commit, pciehp debug messages are enabled by building the kernel
with CONFIG_DYNAMIC_DEBUG=y and booting with this command line option:
dyndbg="file pciehp* +p"
The dyndbg facility is much more flexible: messages can be enabled at boot-
or run-time based on the file name, function name, line number, message
test, etc. See Documentation/admin-guide/dynamic-debug-howto.rst for more
details.
Link: https://lore.kernel.org/lkml/20190509141456.223614-7-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
[bhelgaas: commit log, comment, remove pciehp_debug parameter]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
We're about to convert pciehp to the dyndbg mechanism, which means we can
eventually remove pciehp_debug.
Replace uses of pciehp_debug with dbg() and ctrl_dbg(), which check
pciehp_debug internally.
Link: https://lore.kernel.org/lkml/20190509141456.223614-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
Log messages with pci_dev, not pcie_device. Factor out common message
prefixes with dev_fmt().
Example output change:
- aer 0000:00:00.0:pci002: AER enabled with IRQ ...
+ pcieport 0000:00:00.0: AER: enabled with IRQ ...
Link: https://lore.kernel.org/lkml/20190509141456.223614-5-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- API for late atomic transfers (e.g. to shut down via PMIC). We have a
seperate callback now which is called under clearly defined
conditions. In-kernel users are converted, too.
- new driver for the AMD PCIe MP2 I2C controller
- large refactoring for at91 and bcm-iproc (both gain slave support due
to this)
- and a good share of various driver improvements anf fixes
* 'i2c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (57 commits)
dt-bindings: i2c: riic: document r7s9210 support
i2c: imx-lpi2c: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
i2c-piix4: Add Hygon Dhyana SMBus support
i2c: core: apply 'is_suspended' check for SMBus, too
i2c: core: ratelimit 'transfer when suspended' errors
i2c: iproc: Change driver to use 'BIT' macro
i2c: riic: Add Runtime PM support
i2c: mux: demux-pinctrl: use struct_size() in devm_kzalloc()
i2c: mux: pca954x: allow management of device idle state via sysfs
i2c: mux: pca9541: remove support for unused platform data
i2c: mux: pca954x: remove support for unused platform data
dt-bindings: i2c: i2c-mtk: add support for MT8516
i2c: axxia: use auto cmd for last message
i2c: gpio: flag atomic capability if possible
i2c: algo: bit: add flag to whitelist atomic transfers
i2c: stu300: use xfer_atomic callback to bail out early
i2c: ocores: enable atomic xfers
i2c: ocores: refactor setup for polling
i2c: tegra-bpmp: convert to use new atomic callbacks
i2c: omap: Add the master_xfer_atomic hook
...
|
|
Pull NFS client updates from Anna Schumaker:
"Highlights include:
Stable bugfixes:
- Fall back to MDS if no deviceid is found rather than aborting # v4.11+
- NFS4: Fix v4.0 client state corruption when mount
Features:
- Much improved handling of soft mounts with NFS v4.0:
- Reduce risk of false positive timeouts
- Faster failover of reads and writes after a timeout
- Added a "softerr" mount option to return ETIMEDOUT instead of
EIO to the application after a timeout
- Increase number of xprtrdma backchannel requests
- Add additional xprtrdma tracepoints
- Improved send completion batching for xprtrdma
Other bugfixes and cleanups:
- Return -EINVAL when NFS v4.2 is passed an invalid dedup mode
- Reduce usage of GFP_ATOMIC pages in SUNRPC
- Various minor NFS over RDMA cleanups and bugfixes
- Use the correct container namespace for upcalls
- Don't share superblocks between user namespaces
- Various other container fixes
- Make nfs_match_client() killable to prevent soft lockups
- Don't mark all open state for recovery when handling recallable
state revoked flag"
* tag 'nfs-for-5.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (69 commits)
SUNRPC: Rebalance a kref in auth_gss.c
NFS: Fix a double unlock from nfs_match,get_client
nfs: pass the correct prototype to read_cache_page
NFSv4: don't mark all open state for recovery when handling recallable state revoked flag
SUNRPC: Fix an error code in gss_alloc_msg()
SUNRPC: task should be exit if encode return EKEYEXPIRED more times
NFS4: Fix v4.0 client state corruption when mount
PNFS fallback to MDS if no deviceid found
NFS: make nfs_match_client killable
lockd: Store the lockd client credential in struct nlm_host
NFS: When mounting, don't share filesystems between different user namespaces
NFS: Convert NFSv2 to use the container user namespace
NFSv4: Convert the NFS client idmapper to use the container user namespace
NFS: Convert NFSv3 to use the container user namespace
SUNRPC: Use namespace of listening daemon in the client AUTH_GSS upcall
SUNRPC: Use the client user namespace when encoding creds
NFS: Store the credential of the mount process in the nfs_server
SUNRPC: Cache cred of process creating the rpc_client
xprtrdma: Remove stale comment
xprtrdma: Update comments that reference ib_drain_qp
...
|
|
Log messages with pci_dev, not pcie_device. Factor out common message
prefixes with dev_fmt().
Example output change:
- dpc 0000:00:01.1:pcie008: DPC error containment capabilities...
+ pcieport 0000:00:01.1: DPC: error containment capabilities...
Link: https://lore.kernel.org/lkml/20190509141456.223614-4-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Replace dev_printk(KERN_DEBUG) with dev_info() or dev_err() to be more
consistent with other logging.
These could be converted to dev_dbg(), but that depends on
CONFIG_DYNAMIC_DEBUG and DEBUG, and we want most of these messages to
*always* be in the dmesg log.
Also, use dev_fmt() to add the service name. Example output change:
- pcieport 0000:80:10.0: Signaling PME with IRQ ...
+ pcieport 0000:80:10.0: PME: Signaling with IRQ ...
Link: https://lore.kernel.org/lkml/20190509141456.223614-3-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Replace dev_printk(KERN_DEBUG) with dev_info() or dev_err() to be more
consistent with other logging.
These could be converted to dev_dbg(), but that depends on
CONFIG_DYNAMIC_DEBUG and DEBUG, and we want most of these messages to
*always* be in the dmesg log.
Also remove a redundant kzalloc() failure message.
Link: https://lore.kernel.org/lkml/20190509141456.223614-2-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
The reduce_memory() function clampls the available memory to a limit
defined by the "mem=" command line parameter. It takes into account the
amount of already reserved memory and excludes it from the limit
calculations.
Rather than traverse memblocks and remove them by hand, use
memblock_reserved_size() to account the reserved memory and
memblock_enforce_memory_limit() to clamp the available memory.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"This includes Roman's cgroup2 freezer implementation.
It's a separate machanism from cgroup1 freezer. Instead of blocking
user tasks in arbitrary uninterruptible sleeps, the new implementation
extends jobctl stop - frozen tasks are trapped in jobctl stop until
thawed and can be killed and ptraced. Lots of thanks to Oleg for
sheperding the effort.
Other than that, there are a few trivial changes"
* 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: never call do_group_exit() with task->frozen bit set
kernel: cgroup: fix misuse of %x
cgroup: get rid of cgroup_freezer_frozen_exit()
cgroup: prevent spurious transition into non-frozen state
cgroup: Remove unused cgrp variable
cgroup: document cgroup v2 freezer interface
cgroup: add tracing points for cgroup v2 freezer
cgroup: make TRACE_CGROUP_PATH irq-safe
kselftests: cgroup: add freezer controller self-tests
kselftests: cgroup: don't fail on cg_kill_all() error in cg_destroy()
cgroup: cgroup v2 freezer
cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock
cgroup: implement __cgroup_task_count() helper
cgroup: rename freezer.c into legacy_freezer.c
cgroup: remove extra cgroup_migrate_finish() call
|
