| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The amount of changes wasn't as small as wished, but all reasonably
small fixes. There is a PCM core API change, which is for correcting
the behavior change we took in 6.8. The rest are device-specific fixes
for ASoC AMD, Qualcomm, Cirrus codecs, HD-audio quirks & co"
* tag 'sound-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2
ASoC: amd: yc: add new YC platform variant (0x63) support
ALSA: hda/realtek - ALC285 reduce pop noise from Headphone port
ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk table
ALSA: hda/realtek: Add special fixup for Lenovo 14IRP8
ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()
ALSA: hda/realtek: tas2781: enable subwoofer volume control
ALSA: pcm: clarify and fix default msbits value for all formats
ASoC: qcom: Fix uninitialized pointer dmactl
ALSA: hda/realtek: fix mute/micmute LED For HP mt440
ALSA: Drop leftover snd-rtctimer stuff from Makefile
ALSA: ump: Fix the discard error code from snd_ump_legacy_open()
ALSA: hda/realtek: Enable Mute LED on HP 840 G8 (MB 8AB8)
ASoC: cs35l56: Must clear HALO_STATE before issuing SYSTEM_RESET
ALSA: hda/realtek: Fix top speaker connection on Dell Inspiron 16 Plus 7630
ALSA: firewire-lib: fix to check cycle continuity
|
|
Pull drm fixes from Dave Airlie:
"Bunch of fixes, xe, amdgpu, nouveau and tegra all have a few. Then
drm/bridge including some drivers/soc fallout fixes. The biggest thing
in here is a new unit test for some buddy allocator fixes, otherwise a
misc fbcon, ttm unit test and one msm revert.
Seems pretty normal for this stage.
buddy:
- two allocation fixes + unit test
fbcon:
- font restore syzkaller fix
ttm:
- kunit test fix
bridge:
- fix aux-hpd leaks
- fix aux-hpd registration
- fix use after free in soc/qcom
- fix boot on soc/qcom
xe:
- A couple of tracepoint updates from Priyanka and Lucas
- Make sure BINDs are completed before accepting UNBINDs on LR vms
- Don't arbitrarily restrict max number of batched binds
- Add uapi for dumpable bos (agreed on IRC)
- Remove unused uapi flags and a leftover comment
- A couple of fixes related to the execlist backend
msm:
- DP: Revert a change which was causing a HDP regression
amdgpu:
- Fix potential buffer overflow
- Fix power min cap
- Suspend/resume fix
- SI PM fix
- eDP fix
nouveau:
- fix a misreported VRAM sizing
- fix a regression in suspend/resume due to freeing
tegra:
- host1x reset fix
- only remove existing driver if display is possible"
* tag 'drm-fixes-2024-03-01' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
drm/nouveau: keep DMA buffers required for suspend/resume
nouveau: report byte usage in VRAM usage
drm/xe/xe_trace: Add move_lacks_source detail to xe_bo_move trace
drm/xe: Deny unbinds if uapi ufence pending
drm/xe: Expose user fence from xe_sync_entry
drm/xe: Use pointers in trace events
drm/xe/xe_bo_move: Enhance xe_bo_move trace
drm/xe/mmio: fix build warning for BAR resize on 32-bit
drm/xe: get rid of MAX_BINDS
drm/xe: Use vmalloc for array of bind allocation in bind IOCTL
drm/xe: Don't support execlists in xe_gt_tlb_invalidation layer
drm/xe: Fix execlist splat
drm/xe/uapi: Remove unused flags
drm/xe/uapi: Remove DRM_XE_VM_BIND_FLAG_ASYNC comment left over
drm/xe: Add uapi for dumpable bos
drm/amd/display: Add monitor patch for specific eDP
Revert "drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changes"
drm/tests/drm_buddy: add alloc_range_bias test
drm/buddy: check range allocation matches alignment
drm/buddy: fix range bias
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull fprobe fix from Masami Hiramatsu:
- allocate entry_data_size buffer for each rethook instance.
This fixes a buffer overrun bug (which leads a kernel crash)
when fprobe user uses its entry_data in the entry_handler.
* tag 'probes-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix to allocate entry_data_size buffer with rethook instances
|
|
Since tomoyo_write_control() updates head->write_buf when write()
of long lines is requested, we need to fetch head->write_buf after
head->io_sem is held. Otherwise, concurrent write() requests can
cause use-after-free-write and double-free problems.
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://lkml.kernel.org/r/CAEkJfYNDspuGxYx5kym8Lvp--D36CMDUErg4rxfWFJuPbbji8g@mail.gmail.com
Fixes: bd03a3e4c9a9 ("TOMOYO: Add policy namespace support.")
Cc: <stable@vger.kernel.org> # Linux 3.1+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
SETUP_RNG_SEED in setup_data is supplied by kexec and should
not be reserved in the e820 map.
Doing so reserves 16 bytes of RAM when booting with kexec.
(16 bytes because data->len is zeroed by parse_setup_data so only
sizeof(setup_data) is reserved.)
When kexec is used repeatedly, each boot adds two entries in the
kexec-provided e820 map as the 16-byte range splits a larger
range of usable memory. Eventually all of the 128 available entries
get used up. The next split will result in losing usable memory
as the new entries cannot be added to the e820 map.
Fixes: 68b8e9713c8e ("x86/setup: Use rng seeds from setup_data")
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/ZbmOjKnARGiaYBd5@dwarf.suse.cz
|
|
During VSI reconfiguration filters and VSI config which is set in
ice_vf_init_host_cfg() are lost. Recall the host configuration function
to restore them.
Without this config VF on which MSI-X amount was changed might had a
connection problems.
Fixes: 4d38cb44bd32 ("ice: manage VFs MSI-X using resource tracking")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice_qp_dis() currently does things in very mixed way. Tx is stopped
before disabling IRQ on related queue vector, then it takes care of
disabling Rx and finally NAPI is disabled.
Let us start with disabling IRQs in the first place followed by turning
off NAPI. Then it is safe to handle queues.
One subtle change on top of that is that even though ice_qp_ena() looks
more sane, clear ICE_CFG_BUSY as the last thing there.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Disable NAPI before shutting down queues that this particular NAPI
contains so that the order of actions in i40e_queue_pair_disable()
mirrors what we do in i40e_queue_pair_enable().
Fixes: 123cecd427b6 ("i40e: added queue pair disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently routines that are supposed to toggle state of ring pair do not
take care of associated interrupt with queue vector that these rings
belong to. This causes funky issues such as dead interface due to irq
misconfiguration, as per Pavel's report from Closes: tag.
Add a function responsible for disabling single IRQ in EIMC register and
call this as a very first thing when disabling ring pair during xsk_pool
setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this,
disable/enable NAPI as first/last thing when dealing with closing or
opening ring pair that xsk_pool is being configured on.
Reported-by: Pavel Vazharov <pavel@x3me.net>
Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/
Fixes: 024aa5800f32 ("ixgbe: added Rx/Tx ring disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use queue_limits_start_update / queue_limits_commit_update to update
all the limits in one go and with proper sanity checking.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240229143846.1047223-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nbd currently updates the logical and physical block sizes as well
as the discard_sectors on a live queue. Freeze the queue first to
make sure there are not commands in flight that can see torn or
inconsistent limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240229143846.1047223-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nbd_config_put currently clears discard_sectors when unusing a device.
This is pretty odd behavior and different from the sector size
configuration which is simply left in places and then reconfigured when
nbd_set_size is as part of configuring the device. Change nbd_set_size
to clear discard_sectors if discard is not supported so that all the
queue limits changes are handled in one place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240229143846.1047223-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
pktcdvd sets max_hw_sectors on the queue of the underlying device that
it doesn't own (and doesn't reset it ever) since the driver was merged.
This can create all kinds of problems as the underlying driver doesn't
even know about it changing the limit.
As the state purpose is to not create I/Os larger than a single frame,
and pktcdvd never builds bios larger than that, just set REQ_NOMERGE
on the bios it submits so that largers I/Os never get built.
Note: I don't have packet writing hardware, so this is compile tested
only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240229144408.1047967-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use queue_limits_set which validates the limits and takes care of
updating the readahead settings instead of directly assigning them to
the queue. For that make sure all limits are actually updated before
the assignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240228225653.947152-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a small wrapper around blk_stack_limits that allows passing a bdev
for the bottom device and prints an error in case of misaligned
device. The name fits into the new queue limits API and the intent is
to eventually replace disk_stack_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240228225653.947152-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a small wrapper around queue_limits_commit_update for stacking
drivers that don't want to update existing limits, but set an
entirely new set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240228225653.947152-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Limit the WiFi PCIe link speed to Gen2 speed (500 MB/s), which is the
speed that the boot firmware has brought up the link at (and that
Windows uses).
This is specifically needed to avoid a large amount of link errors when
restarting the link during boot (but which are currently not reported).
This also appears to fix intermittent failures to download the ath11k
firmware during boot which can be seen when there is a longer delay
between restarting the link and loading the WiFi driver (e.g. when using
full disk encryption).
Fixes: 123b30a75623 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240223152124.20042-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Limit the WiFi PCIe link speed to Gen2 speed (500 MB/s), which is the
speed that Windows uses.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240223152124.20042-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Count the running time and actual IO processing time of the sqpoll
thread, and output the statistical data to fdinfo.
Variable description:
"work_time" in the code represents the sum of the jiffies of the sq
thread actually processing IO, that is, how many milliseconds it
actually takes to process IO. "total_time" represents the total time
that the sq thread has elapsed from the beginning of the loop to the
current time point, that is, how many milliseconds it has spent in
total.
The test tool is fio, and its parameters are as follows:
[global]
ioengine=io_uring
direct=1
group_reporting
bs=128k
norandommap=1
randrepeat=0
refill_buffers
ramp_time=30s
time_based
runtime=1m
clocksource=clock_gettime
overwrite=1
log_avg_msec=1000
numjobs=1
[disk0]
filename=/dev/nvme0n1
rw=read
iodepth=16
hipri
sqthread_poll=1
The test results are as follows:
Every 2.0s: cat /proc/9230/fdinfo/6 | grep -E Sq
SqMask: 0x3
SqHead: 3197153
SqTail: 3197153
CachedSqHead: 3197153
SqThread: 9231
SqThreadCpu: 11
SqTotalTime: 18099614
SqWorkTime: 16748316
The test results corresponding to different iodepths are as follows:
|-----------|-------|-------|-------|------|-------|
| iodepth | 1 | 4 | 8 | 16 | 64 |
|-----------|-------|-------|-------|------|-------|
|utilization| 2.9% | 8.8% | 10.9% | 92.9%| 84.4% |
|-----------|-------|-------|-------|------|-------|
| idle | 97.1% | 91.2% | 89.1% | 7.1% | 15.6% |
|-----------|-------|-------|-------|------|-------|
Signed-off-by: Xiaobing Li <xiaobing.li@samsung.com>
Link: https://lore.kernel.org/r/20240228091251.543383-1-xiaobing.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The flags don't change, just intialize them once rather than every loop
for multishot.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert the qnx4 filesystem to use the new mount API.
Tested mount, umount, and remount using a qnx4 boot image.
Signed-off-by: Bill O'Donnell <bodonnel@redhat.com>
Link: https://lore.kernel.org/r/20240229161649.800957-1-bodonnel@redhat.com
Acked-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The function inode_set_ctime_current simply retrieves the current time
and assigns it to the field __i_ctime without any alterations. Therefore,
it is possible to set ctime to now directly using inode_set_ctime_to_ts
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20240228173031.3208743-1-phind.uet@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
iommu_sva_bind_device will directly goto out in multi-device
case when found existing domain, ignoring list_add handle,
which causes the handle to fail to be shared.
Fixes: 65d4418c5002 ("iommu/sva: Restore SVA handle sharing")
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240227064821.128-1-zhangfei.gao@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.9/block
Pull MD updates from Song:
"The major changes are:
1. Refactor raid1 read_balance, by Yu Kuai and Paul Luse.
2. Clean up and fix for md_ioctl, by Li Nan.
3. Other small fixes, by Gui-Dong Han and Heming Zhao."
* tag 'md-6.9-20240301' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: (22 commits)
md/raid1: factor out helpers to choose the best rdev from read_balance()
md/raid1: factor out the code to manage sequential IO
md/raid1: factor out choose_bb_rdev() from read_balance()
md/raid1: factor out choose_slow_rdev() from read_balance()
md/raid1: factor out read_first_rdev() from read_balance()
md/raid1-10: factor out a new helper raid1_should_read_first()
md/raid1-10: add a helper raid1_check_read_range()
md/raid1: fix choose next idle in read_balance()
md/raid1: record nonrot rdevs while adding/removing rdevs to conf
md/raid1: factor out helpers to add rdev to conf
md: add a new helper rdev_has_badblock()
md/raid5: fix atomicity violation in raid5_cache_count
md/md-bitmap: fix incorrect usage for sb_index
md: check mddev->pers before calling md_set_readonly()
md: clean up openers check in do_md_stop() and md_set_readonly()
md: sync blockdev before stopping raid or setting readonly
md: factor out a helper to sync mddev
md: Don't clear MD_CLOSING when the raid is about to stop
md: return directly before setting did_set_md_closing
md: clean up invalid BUG_ON in md_ioctl
...
|
|
Both pidfs and nsfs use a memory location to stash a dentry for reuse by
concurrent openers. Right now two custom
dentry->d_prune::{ns,pidfs}_prune_dentry() methods are needed that do
the same thing. The only thing that differs is that they need to get to
the memory location to store or retrieve the dentry from differently.
Fix that by remember the stashing location for the dentry in
dentry->d_fsdata which allows us to retrieve it in dentry->d_prune. That
in turn makes it possible to add a common helper that pidfs and nsfs can
both use.
Link: https://lore.kernel.org/r/CAHk-=wg8cHY=i3m6RnXQ2Y2W8psicKWQEZq1=94ivUiviM-0OA@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In earlier patches we moved both nsfs and pidfs to path_from_stashed().
The helper currently tries to add and stash a new dentry if a reusable
dentry couldn't be found and returns EAGAIN if it lost the race to stash
the dentry. The caller can use EAGAIN to retry.
The helper and the two filesystems be written in a way that makes
returning EAGAIN unnecessary. To do this we need to change the
dentry->d_prune() implementation of nsfs and pidfs to not simply replace
the stashed dentry with NULL but to use a cmpxchg() and only replace
their own dentry.
Then path_from_stashed() can then be changed to not just stash a new
dentry when no dentry is currently stashed but also when an already dead
dentry is stashed. If another task managed to install a dentry in the
meantime it can simply be reused. Pack that into a loop and call it a
day.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wgtLF5Z5=15-LKAczWm=-tUjHO+Bpf7WjBG+UU3s=fEQw@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Moving pidfds from the anonymous inode infrastructure to a separate tiny
in-kernel filesystem similar to sockfs, pipefs, and anon_inodefs causes
selinux denials and thus various userspace components that make heavy
use of pidfds to fail as pidfds used anon_inode_getfile() which aren't
subject to any LSM hooks. But dentry_open() is and that would cause
regressions.
The failures that are seen are selinux denials. But the core failure is
dbus-broker. That cascades into other services failing that depend on
dbus-broker. For example, when dbus-broker fails to start polkit and all
the others won't be able to work because they depend on dbus-broker.
The reason for dbus-broker failing is because it doesn't handle failures
for SO_PEERPIDFD correctly. Last kernel release we introduced
SO_PEERPIDFD (and SCM_PIDFD). SO_PEERPIDFD allows dbus-broker and polkit
and others to receive a pidfd for the peer of an AF_UNIX socket. This is
the first time in the history of Linux that we can safely authenticate
clients in a race-free manner.
dbus-broker immediately made use of this but messed up the error
checking. It only allowed EINVAL as a valid failure for SO_PEERPIDFD.
That's obviously problematic not just because of LSM denials but because
of seccomp denials that would prevent SO_PEERPIDFD from working; or any
other new error code from there.
So this is catching a flawed implementation in dbus-broker as well. It
has to fallback to the old pid-based authentication when SO_PEERPIDFD
doesn't work no matter the reasons otherwise it'll always risk such
failures. So overall that LSM denial should not have caused dbus-broker
to fail. It can never assume that a feature released one kernel ago like
SO_PEERPIDFD can be assumed to be available.
So, the next fix separate from the selinux policy update is to try and
fix dbus-broker at [3]. That should make it into Fedora as well. In
addition the selinux reference policy should also be updated. See [4]
for that. If Selinux is in enforcing mode in userspace and it encounters
anything that it doesn't know about it will deny it by default. And the
policy is entirely in userspace including declaring new types for stuff
like nsfs or pidfs to allow it.
For now we continue to raise S_PRIVATE on the inode if it's a pidfs
inode which means things behave exactly like before.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2265630
Link: https://github.com/fedora-selinux/selinux-policy/pull/2050
Link: https://github.com/bus1/dbus-broker/pull/343 [3]
Link: https://github.com/SELinuxProject/refpolicy/pull/762 [4]
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240222190334.GA412503@dev-arch.thelio-3990X
Link: https://lore.kernel.org/r/20240218-neufahrzeuge-brauhaus-fb0eb6459771@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the newly added path_from_stashed() helper for nsfs.
Link: https://lore.kernel.org/r/20240218-neufahrzeuge-brauhaus-fb0eb6459771@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a helper for both nsfs and pidfs to reuse an already stashed dentry
or to add and stash a new dentry.
Link: https://lore.kernel.org/r/20240218-neufahrzeuge-brauhaus-fb0eb6459771@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This moves pidfds from the anonymous inode infrastructure to a tiny
pseudo filesystem. This has been on my todo for quite a while as it will
unblock further work that we weren't able to do simply because of the
very justified limitations of anonymous inodes. Moving pidfds to a tiny
pseudo filesystem allows:
* statx() on pidfds becomes useful for the first time.
* pidfds can be compared simply via statx() and then comparing inode
numbers.
* pidfds have unique inode numbers for the system lifetime.
* struct pid is now stashed in inode->i_private instead of
file->private_data. This means it is now possible to introduce
concepts that operate on a process once all file descriptors have been
closed. A concrete example is kill-on-last-close.
* file->private_data is freed up for per-file options for pidfds.
* Each struct pid will refer to a different inode but the same struct
pid will refer to the same inode if it's opened multiple times. In
contrast to now where each struct pid refers to the same inode. Even
if we were to move to anon_inode_create_getfile() which creates new
inodes we'd still be associating the same struct pid with multiple
different inodes.
The tiny pseudo filesystem is not visible anywhere in userspace exactly
like e.g., pipefs and sockfs. There's no lookup, there's no complex
inode operations, nothing. Dentries and inodes are always deleted when
the last pidfd is closed.
We allocate a new inode for each struct pid and we reuse that inode for
all pidfds. We use iget_locked() to find that inode again based on the
inode number which isn't recycled. We allocate a new dentry for each
pidfd that uses the same inode. That is similar to anonymous inodes
which reuse the same inode for thousands of dentries. For pidfds we're
talking way less than that. There usually won't be a lot of concurrent
openers of the same struct pid. They can probably often be counted on
two hands. I know that systemd does use separate pidfd for the same
struct pid for various complex process tracking issues. So I think with
that things actually become way simpler. Especially because we don't
have to care about lookup. Dentries and inodes continue to be always
deleted.
The code is entirely optional and fairly small. If it's not selected we
fallback to anonymous inodes. Heavily inspired by nsfs which uses a
similar stashing mechanism just for namespaces.
Link: https://lore.kernel.org/r/20240213-vfs-pidfd_fs-v1-2-f863f58cfce1@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
My recent commit e5d00aaac651 ("selftests/powerpc: Check all FPRs in
fpu_preempt") inadvertently broke the fpu_signal test.
It needs to take into account that fpu_preempt now loads 32 FPRs, so
enlarge darray.
Also use the newly added randomise_darray() to properly randomise darray.
Finally the checking done in signal_fpu_sig() needs to skip checking
f30/f31, because they are used as scratch registers in check_all_fprs(),
called by preempt_fpu(), and so could hold other values when the signal
is taken.
Fixes: e5d00aaac651 ("selftests/powerpc: Check all FPRs in fpu_preempt")
Reported-by: Spoorthy <spoorthy@linux.ibm.com>
Depends-on: 2ba107f6795d ("selftests/powerpc: Generate better bit patterns for FPU tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240301101035.1230024-1-mpe@ellerman.id.au
|
|
In azx_probe_codecs function, when bus->codec_mask is becomes to 0(no codecs),
execute azx_init_chip, bus->codec_mask will be initialized to a value again,
this causes snd_hda_codec_new function to run, the process is as follows:
-->snd_hda_codec_new
-->snd_hda_codec_device_init
-->snd_hdac_device_init---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s
---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s
---snd_hdac_read_parm(...AC_PAR_SUBSYSTEM_ID) 2s
---snd_hdac_read_parm(...AC_PAR_REV_ID) 2s
---snd_hdac_read_parm(...AC_PAR_NODE_COUNT) 2s
when no codecs, read communication is error, each command will be polled for
2 second, a total of 10s, it is easy to some problem.
like this:
2 [ 14.833404][ 6] [ T164] hda 0006:00: Codec #0 probe error; disabling it...
3 [ 14.844178][ 6] [ T164] hda 0006:00: codec_mask = 0x1
4 [ 14.880532][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000
5 [ 15.891988][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000
6 [ 16.978090][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0001
7 [ 18.140895][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0002
8 [ 19.135516][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0004
10 [ 19.900086][ 6] [ T164] hda 0006:00: no codecs initialized
11 [ 45.573398][ 2] [ C2] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [kworker/2:0:25]
Here, when bus->codec_mask is 0, use a direct break to avoid execute snd_hda_codec_new function.
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://lore.kernel.org/r/20240301011841.7247-1-soxiebing@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
platform
Headset Mic will no show at resume back.
This patch will fix this issue.
Fixes: d7f32791a9fc ("ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4713d48a372e47f98bba0c6120fd8254@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The unprepare call must be carried out before the finalize call
as the latter can free the request.
Fixes: c66c17a0f69b ("crypto: rk3288 - Remove prepare/unprepare request")
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add myself as co-maintainer for Socionext netsec driver.
This commit also removes Jassi from maintainer since he
no longer has a Developerbox.
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Masahisa Kojima <kojima.masahisa@socionext.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is now possible to disable BQL, but that causes the cpsw driver to break:
drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
297 | dql_avail(&netif_txq->dql),
There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.
Fixes: ea7f3cfaa588 ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current driver has some asymmetry in the runtime PM calls. On lan78xx_open()
it will call usb_autopm_get() and unconditionally usb_autopm_put(). And
on lan78xx_stop() it will call only usb_autopm_put(). So far, it was
working only because this driver do not activate autosuspend by default,
so it was visible only by warning "Runtime PM usage count underflow!".
Since, with current driver, we can't use runtime PM with active link,
execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise,
keep ref counting high as long as interface is open.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current method for signaling the compatibility of a Hyper-V host
with MSIs featuring 15-bit APIC IDs relies on a synthetic cpuid leaf.
However, for higher VTLs, this leaf is not reported, due to the absence
of an IO-APIC.
As an alternative, assume that when running at a high VTL, the host
supports 15-bit APIC IDs. This assumption is safe, as Hyper-V does not
employ any architectural MSIs at higher VTLs
This unblocks startup of VTL2 environments with more than 256 CPUs.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com>
|
|
Hogs are added *after* ACPI so should be removed *before* in error path.
Fixes: a411e81e61df ("gpiolib: add hogs support for machine code")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The internal delay properties are not mandatory and should have a
documented default value. The device only supports either no delay or a
fixed delay and the device reset default is no delay, document the
default as no delay.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a CoCo VM, when transitioning memory from encrypted to decrypted, or
vice versa, the caller of set_memory_encrypted() or set_memory_decrypted()
is responsible for ensuring the memory isn't in use and isn't referenced
while the transition is in progress. The transition has multiple steps,
and the memory is in an inconsistent state until all steps are complete.
A reference while the state is inconsistent could result in an exception
that can't be cleanly fixed up.
However, the kernel load_unaligned_zeropad() mechanism could cause a stray
reference that can't be prevented by the caller of set_memory_encrypted()
or set_memory_decrypted(), so there's specific code to handle this case.
But a CoCo VM running on Hyper-V may be configured to run with a paravisor,
with the #VC or #VE exception routed to the paravisor. There's no
architectural way to forward the exceptions back to the guest kernel, and
in such a case, the load_unaligned_zeropad() specific code doesn't work.
To avoid this problem, mark pages as "not present" while a transition
is in progress. If load_unaligned_zeropad() causes a stray reference, a
normal page fault is generated instead of #VC or #VE, and the
page-fault-based fixup handlers for load_unaligned_zeropad() resolve the
reference. When the encrypted/decrypted transition is complete, mark the
pages as "present" again.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-4-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-4-mhklinux@outlook.com>
|
|
set_memory_p() is currently static. It has parameters that don't
match set_memory_p() under arch/powerpc and that aren't congruent
with the other set_memory_* functions. There's no good reason for
the difference.
Fix this by making the parameters consistent, and update the one
existing call site. Make the function non-static and add it to
include/asm/set_memory.h so that it is completely parallel to
set_memory_np() and is usable in other modules.
No functional change.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-3-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-3-mhklinux@outlook.com>
|
|
In preparation for temporarily marking pages not present during a
transition between encrypted and decrypted, use slow_virt_to_phys()
in the hypervisor callback. As long as the PFN is correct,
slow_virt_to_phys() works even if the leaf PTE is not present.
The existing functions that depend on vmalloc_to_page() all
require that the leaf PTE be marked present, so they don't work.
Update the comments for slow_virt_to_phys() to note this broader usage
and the requirement to work even if the PTE is not marked present.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-2-mhklinux@outlook.com>
|
|
Add documentation topic for PCI pass-thru devices in Linux guests
on Hyper-V and for the associated PCI controller driver (pci-hyperv.c).
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240222200710.305259-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240222200710.305259-1-mhklinux@outlook.com>
|
|
A previous commit left the indentation in create_gpadl_header()
unchanged for ease of review. Update the indentation and remove
line wrap in two places where it is no longer necessary.
No functional change.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240111165451.269418-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240111165451.269418-2-mhklinux@outlook.com>
|
|
create_gpadl_header() creates a message header, and one or more message
bodies if the number of GPADL entries exceeds what fits in the
header. Currently the code for creating the message header is
duplicated in the two halves of the main "if" statement governing
whether message bodies are created.
Eliminate the duplication by making minor tweaks to the logic and
associated comments. While here, simplify the handling of memory
allocation errors, and use umin() instead of open coding it.
For ease of review, the indentation of sizable chunks of code is
*not* changed. A follow-on patch updates only the indentation.
No functional change.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240111165451.269418-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240111165451.269418-1-mhklinux@outlook.com>
|
|
A recent commit removing the use of screen_info introduced a logic
error. The error causes hvfb_getmem() to always return -ENOMEM
for Generation 2 VMs. As a result, the Hyper-V frame buffer
device fails to initialize. The error was introduced by removing
an "else if" clause, leaving Gen2 VMs to always take the -ENOMEM
error path.
Fix the problem by removing the error path "else" clause. Gen 2
VMs now always proceed through the MMIO memory allocation code,
but with "base" and "size" defaulting to 0.
Fixes: 0aa0838c84da ("fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240201060022.233666-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240201060022.233666-1-mhklinux@outlook.com>
|
|
The VMBUS_RING_SIZE macro adds space for a ring buffer header to the
requested ring buffer size. The header size is always 1 page, and so
its size varies based on the PAGE_SIZE for which the kernel is built.
If the requested ring buffer size is a large power-of-2 size and the header
size is small, the resulting size is inefficient in its use of memory.
For example, a 512 Kbyte ring buffer with a 4 Kbyte page size results in
a 516 Kbyte allocation, which is rounded to up 1 Mbyte by the memory
allocator, and wastes 508 Kbytes of memory.
In such situations, the exact size of the ring buffer isn't that important,
and it's OK to allocate the 4 Kbyte header at the beginning of the 512
Kbytes, leaving the ring buffer itself with just 508 Kbytes. The memory
allocation can be 512 Kbytes instead of 1 Mbyte and nothing is wasted.
Update VMBUS_RING_SIZE to implement this approach for "large" ring buffer
sizes. "Large" is somewhat arbitrarily defined as 8 times the size of
the ring buffer header (which is of size PAGE_SIZE). For example, for
4 Kbyte PAGE_SIZE, ring buffers of 32 Kbytes and larger use the first
4 Kbytes as the ring buffer header. For 64 Kbyte PAGE_SIZE, ring buffers
of 512 Kbytes and larger use the first 64 Kbytes as the ring buffer
header. In both cases, smaller sizes add space for the header so
the ring size isn't reduced too much by using part of the space for
the header. For example, with a 64 Kbyte page size, we don't want
a 128 Kbyte ring buffer to be reduced to 64 Kbytes by allocating half
of the space for the header. In such a case, the memory allocation
is less efficient, but it's the best that can be done.
While the new algorithm slightly changes the amount of space allocated
for ring buffers by drivers that use VMBUS_RING_SIZE, the devices aren't
known to be sensitive to small changes in ring buffer size, so there
shouldn't be any effect.
Fixes: c1135c7fd0e9 ("Drivers: hv: vmbus: Introduce types of GPADL")
Fixes: 6941f67ad37d ("hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218502
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240229004533.313662-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240229004533.313662-1-mhklinux@outlook.com>
|
|
Hyper-V hosts can omit the _SYNC flag to due a bug on resume from modern
suspend. In such a case, the guest may fail to update its time-of-day to
account for the period when it was suspended, and could proceed with a
significantly wrong time-of-day. In such a case when the guest is
significantly behind, fix it by treating a _SAMPLE the same as if _SYNC
was received so that the guest time-of-day is updated.
This is hidden behind param hv_utils.timesync_implicit.
Signed-off-by: Peter Martincic <pmartincic@microsoft.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20231127213524.52783-1-pmartincic@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20231127213524.52783-1-pmartincic@linux.microsoft.com>
|
|
After shuffling the code, error path wasn't updated correctly.
Fix it here.
Fixes: 2f4133bb5f14 ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
