summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-23Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"Alex Deucher
This reverts commit a6f9761743bf35b052180f4a8bdae4d2cc0465f6. Remove this commit as it is no longer necessary. The relevant bugs were fixed properly in: drm/radeon/kms: hopefully fix pll issues for real (v3) 5b40ddf888398ce4cccbf3b9d0a18d90149ed7ff drm/radeon/kms: add missing frac fb div flag for dce4+ 9f4283f49f0a96a64c5a45fe56f0f8c942885eef This commit also broke certain ~5 Mhz modes on old arcade monitors, so reverting this commit fixes: https://bugzilla.kernel.org/show_bug.cgi?id=29502 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-22NFSD: fix decode_cb_sequence4resokBenny Halevy
Fix bug introduced in patch 85a56480 NFSD: Update XDR decoders in NFSv4 callback client Although decode_cb_sequence4resok ignores highest slotid and target highest slotid it must account for their space in their xdr stream when calling xdr_inline_decode Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-02-22i2c-omap: fix static suspend vs. runtime suspendKevin Hilman
When runtime PM is enabled, each OMAP i2c device is suspended after each i2c xfer. However, there are two cases when the static suspend methods must be used to ensure the devices are suspended: 1) runtime PM is disabled, either at compile time or dynamically via /sys/devices/.../power/control. 2) an i2c client driver uses i2c during it's suspend callback, thus leaving the i2c driver active (NOTE: runtime suspend transitions are disabled during system suspend, so i2c activity during system suspend will runtime resume the device, but not runtime (re)suspend it.) Since the actual work to suspend the device is handled by the subsytem, call the bus methods to take care of it. NOTE: This takes care of a known suspend problem on OMAP3 where the TWL RTC driver does i2c xfers during its suspend path leaving the i2c driver in an active state (since runtime suspend transistions are disabled.) Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-22i2c-stu300: make sure adapter-name is terminatedWolfram Sang
Use strlcpy instead of strncpy. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-22xfs: check if device support discard in xfs_ioc_trim()Lukas Czerner
Right now we, are relying on the fact that when we attempt to actually do the discard, blkdev_issue_discar() returns -EOPNOTSUPP and the user is informed that the device does not support discard. However, in the case where the we do not hit any suitable free extent to trim in FITRIM code, it will finish without any error. This is very confusing, because it seems that FITRIM was successful even though the device does not actually supports discard. Solution: Check for the discard support before attempt to search for free extents. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-02-22xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1Dan Rosenberg
The FSGEOMETRY_V1 ioctl (and its compat equivalent) calls out to xfs_fs_geometry() with a version number of 3. This code path does not fill in the logsunit member of the passed xfs_fsop_geom_t, leading to the leaking of four bytes of uninitialized stack data to potentially unprivileged callers. v2 switches to memset() to avoid future issues if structure members change, on suggestion of Dave Chinner. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Reviewed-by: Eugene Teo <eugeneteo@kernel.org> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-02-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-22ASoC: Hook wm_hubs micbiases up to CLK_SYSMark Brown
The microphone detection functionality requires a clock to work. In any non-detection case where the MICBIAS is enabled CLK_SYS will be needed anyway so there is no negative impact on power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Correct definition of WM8903_VMID_RES_5KMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Fix WM8958 default microphone detection argument orderingMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ttm: Include the 'struct dev' when using the DMA API.Konrad Rzeszutek Wilk
This makes the accounting when using 'debug_dma_dump_mappings()' and CONFIG_DMA_API_DEBUG=y be assigned to the correct device instead of 'fallback'. No functional change - just cosmetic. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-22sfc: lower stack usage in efx_ethtool_self_testEric Dumazet
drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’: drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes is larger than 1024 bytes Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Use IPv6 link-local address for multicast listener queriesLinus Lüssing
Currently the bridge multicast snooping feature periodically issues IPv6 general multicast listener queries to sense the absence of a listener. For this, it uses :: as its source address - however RFC 2710 requires: "To be valid, the Query message MUST come from a link-local IPv6 Source Address". Current Linux kernel versions seem to follow this requirement and ignore our bogus MLD queries. With this commit a link local address from the bridge interface is being used to issue the MLD query, resulting in other Linux devices which are multicast listeners in the network to respond with a MLD response (which was not the case before). Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Fix MLD queries' ethernet source addressLinus Lüssing
Map the IPv6 header's destination multicast address to an ethernet source address instead of the MLD queries multicast address. For instance for a general MLD query (multicast address in the MLD query set to ::), this would wrongly be mapped to 33:33:00:00:00:00, although an MLD queries destination MAC should always be 33:33:00:00:00:01 which matches the IPv6 header's multicast destination ff02::1. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Allow mcast snooping for transient link local addresses tooLinus Lüssing
Currently the multicast bridge snooping support is not active for link local multicast. I assume this has been done to leave important multicast data untouched, like IPv6 Neighborhood Discovery. In larger, bridged, local networks it could however be desirable to optimize for instance local multicast audio/video streaming too. With the transient flag in IPv6 multicast addresses we have an easy way to optimize such multimedia traffic without tempering with the high priority multicast data from well-known addresses. This patch alters the multicast bridge snooping for IPv6, to take effect for transient multicast addresses instead of non-link-local addresses. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22ipv6: Add IPv6 multicast address flag definesLinus Lüssing
This commit adds the missing IPv6 multicast address flag defines to complement the already existing multicast address scope defines and to be able to check these flags nicely in the future. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Add missing ntohs()s for MLDv2 report parsingLinus Lüssing
The nsrcs number is 2 Byte wide, therefore we need to call ntohs() before using it. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 reportLinus Lüssing
We actually want a pointer to the grec_nsrcr and not the following field. Otherwise we can get very high values for *nsrcs as the first two bytes of the IPv6 multicast address are being used instead, leading to a failing pskb_may_pull() which results in MLDv2 reports not being parsed. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Fix IPv6 multicast snooping by storing correct protocol typeLinus Lüssing
The protocol type for IPv6 entries in the hash table for multicast bridge snooping is falsely set to ETH_P_IP, marking it as an IPv4 address, instead of setting it to ETH_P_IPV6, which results in negative look-ups in the hash table later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: re-enable Zoomed Video support cm4000_cs: Fix undefined ops warning pcmcia vs. MECR on pxa25x/sa1111 drivers/char/pcmcia/ipwireless/main.c: Convert release_resource to release_region/release_mem_region
2011-02-22Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for now genirq: Prevent access beyond allocated_irqs bitmap
2011-02-22Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix throttle logic perf, x86: P4 PMU: Fix spurious NMI messages
2011-02-22Merge branch 'fix/asoc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Ensure supplies are maintained for force enabled widgets ASoC: WM8994: Improve playback robustness ASoC: WM8994: Improve robustness in some use cases ASoC: WM8903: Fix mic detection enable logic ASoC: WM8903: Fix mic detection register definitions ASoC: CX20442: fix wrong reg_cache_default content ASoC: Sync initial widget state with hardware
2011-02-22.gitignore: ignore *.xz filesRomain Francoise
Building with CONFIG_KERNEL_XZ results in the following: # Untracked files: # (use "git add <file>..." to include in what will be committed) # # arch/x86/boot/compressed/vmlinux.bin.xz So ignore xz-compressed files at the top level like we already do for other compression types. Signed-off-by: Romain Francoise <romain@orebokech.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-22Merge branch 'drm-intel-fixes' into drm-intel-nextChris Wilson
Merge in the conflicting eDP fix. Conflicts: drivers/gpu/drm/i915/i915_irq.c drivers/gpu/drm/i915/intel_display.c Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22drm/i915: Add support for limited color range of broadcast outputsChris Wilson
In order to prevent "crushed blacks" on TVs, the range of the RGB output may be limited to 16-235. This used to be available through Xorg under the "Broadcast RGB" option, so reintroduce support for KMS. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34543 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22drm/i915: Use a device flag for non-interruptible phasesChris Wilson
The code paths for modesetting are growing in complexity as we may need to move the buffers around in order to fit the scanout in the aperture. Therefore we face a choice as to whether to thread the interruptible status through the entire pinning and unbinding code paths or to add a flag to the device when we may not be interrupted by a signal. This does the latter and so fixes a few instances of modesetting failures under stress. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22drm/i915: First try a normal large kmalloc for the temporary exec buffersChris Wilson
As we just need a temporary array whilst performing the relocations for the execbuffer, first attempt to allocate using kmalloc even if it is not of order page-0. This avoids the overhead of remapping the discontiguous array and so gives a moderate boost to execution throughput. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22drm/i915: Add a module parameter to ignore lid statusChris Wilson
Seems like we are forever to be cursed with buggy firmware, so allow the user to explicitly set the panel connection status. Of secondary utility for cases where I run laptops with the lid closed, but still want to configure the LVDS. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22drm/i915: Protect against drm_gem_object not being the first memberChris Wilson
Dave Airlie spotted that we had a potential bug should we ever rearrange the drm_i915_gem_object so not the base drm_gem_object was not its first member. He noticed that we often convert the return of drm_gem_object_lookup() immediately into drm_i915_gem_object and then check the result for nullity. This is only valid when the base object is the first member and so the superobject has the same address. Play safe instead and use the compiler to convert back to the original return address for sanity testing. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22drm/i915: fix per-pipe reads after "cleanup"Jesse Barnes
In a few places I replaced reads of per-pipe registers with the actual register offsets themselves (converting I915_READ(reg) to _PIPE(reg)). Alexey caught this on his 9xx machine because the cursor control write was affected. A quick audit showed a few more places where I'd borked a read, so here's a patch to fix things up. Reported-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [ickle: compilation fix] Tested-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22Revert "drm/i915: Disable SSC for outputs other than LVDS or DP"Chris Wilson
This reverts commit 633f2ea26665d37bb3c8ae30799aa14988622653 and the attempted fix dcbe6f2b3d136995915e2f9ecc7d4f3b28f47b6c. There is a single clock source used for both SSC (some LVDS and DP) and non-SSC (VGA, DVI) outputs. So we need to be careful to only enable SSC as necessary. However, fiddling with DREFCLK was causing DP links to be dropped and we do not have a fix ready, so revert. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22drm/i915: skip FDI & PCH enabling for DP_AJesse Barnes
eDP on the CPU doesn't need the PCH set up at all, it can in fact cause problems. So avoid FDI training and PCH PLL enabling in that case. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22agp/intel: Experiment with a 855GM GWB bitChris Wilson
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27187 Tested-by: Thorsten Vollmer <thorsten@thvo.de> (DFI-ACP G5M150-N w/852GME) Tested-by: Moritz Brunner <2points@gmx.org> (Asus M2400N/i855GM) Tested-by: Indan Zupancic <indan@nul.nu> (Thinkpad X40/855GM rev 02) Tested-by: Eric Anholt <eric@anholt.net> (865G) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22drm/i915: don't enable FDI & transcoder interrupts after allJesse Barnes
We can enable some safely, but FDI and transcoder interrupts can occur and block other interrupts from being detected (like port hotplug events). So keep them disabled by default (they can be re-enabled for debugging display bringup, but should generally be off). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switchChris Wilson
If the gpu is hung, then whatever was inside the render cache is lost and there is little point waiting for it. Or complaining if we see an EIO or EAGAIN instead. So, if the GPU is indeed in its death throes when we need to rewrite the registers for a new framebuffer, just ignore the error and proceed with the update. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-22KVM: SVM: Advance instruction pointer in dr_interceptJoerg Roedel
In the dr_intercept function a new cpu-feature called decode-assists is implemented and used when available. This code-path does not advance the guest-rip causing the guest to dead-loop over mov-dr instructions. This is fixed by this patch. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-02-22ALSA: HDA: Fix mic initialization in VIA auto parserDavid Henningsson
This typo caused some microphone inputs not to be correctly initialized on VIA codecs. Reported-By: Mark Goldstein <goldstein.mark@gmail.com> Cc: stable@kernel.org Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-21Linux 2.6.38-rc6Linus Torvalds
2011-02-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Copy up lower inode attrs in getattr ecryptfs: read on a directory should return EISDIR if not supported eCryptfs: Handle NULL nameidata pointers eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"
2011-02-21drm/i915: Do not handle backlight combination mode speciallyIndan Zupancic
The current code does not follow Intel documentation: It misses some things and does other, undocumented things. This causes wrong backlight values in certain conditions. Instead of adding tricky code handling badly documented and rare corner cases, don't handle combination mode specially at all. This way PCI_LBPC is never touched and weird things shouldn't happen. If combination mode is enabled, then the only downside is that changing the brightness has a greater granularity (the LBPC value), but LBPC is at most 254 and the maximum is in the thousands, so this is no real functional loss. A potential problem with not handling combined mode is that a brightness of max * PCI_LBPC is not bright enough. However, this is very unlikely because from the documentation LBPC seems to act as a scaling factor and doesn't look like it's supposed to be changed after boot. The value at boot should always result in a bright enough screen. IMPORTANT: However, although usually the above is true, it may not be when people ran an older (2.6.37) kernel which messed up the LBPC register, and they are unlucky enough to have a BIOS that saves and restores the LBPC value. Then a good kernel may seem to not work: Max brightness isn't bright enough. If this happens people should boot back into the old kernel, set brightness to the maximum, and then reboot. After that everything should be fine. For more information see the below links. This fixes bugs: http://bugzilla.kernel.org/show_bug.cgi?id=23472 http://bugzilla.kernel.org/show_bug.cgi?id=25072 Signed-off-by: Indan Zupancic <indan@nul.nu> Tested-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-21module: explicitly align module_version_attribute structureDmitry Torokhov
We force particular alignment when we generate attribute structures when generation MODULE_VERSION() data and we need to make sure that this alignment is followed when we iterate over these structures, otherwise we may crash on platforms whose natural alignment is not sizeof(void *), such as m68k. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> [ There are more issues here, but the fixes are incredibly ugly - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-21Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: dell-laptop: Toggle the unsupported hardware killswitch thinkpad_acpi: Always report scancodes for hotkeys acer-wmi: Fix capitalisation of GUID platform/x86: ideapad-laptop depends on INPUT platform: x86: acer-wmi: world-writable sysfs threeg file platform: x86: asus_acpi: world-writable procfs files platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files platform-drivers: x86: pmic: Use request_irq instead of chained handler platform-drivers: x86: pmic: Use irq_chip buslock mechanism platform-drivers: x86: Convert pmic to new irq_chip functions platform-drivers: x86: pmic: Fix up bogus irq hackery
2011-02-21Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: fixdep: Do not record dependency on the source file itself
2011-02-21Docbook: add fs/eventfd.c and fix typos in itRandy Dunlap
Add fs/eventfd.c to filesystems docbook. Make typo corrections in fs/eventfd.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-21Documentation: log_buf_len uses [KMG] suffixRandy Dunlap
Update the "log_buf_len" description to use [KMG] syntax for the buffer size. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-21Documentation: explain [KMG] parameter suffixAhmed S. Darwish
The '[KMG]' suffix is commonly described after a number of kernel parameter values documentation. Explicitly state its semantics. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-21Documentation: complete crashkernel= parameter documentationAhmed S. Darwish
Complete the crashkernel= kernel parameter documentation. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: keep reference to parent inode on ceph_dentry ceph: queue cap_snaps once per realm libceph: fix socket write error handling libceph: fix socket read error handling
2011-02-21Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: Fix regulator names ARM: S5PV210: Update max8998_platform_data ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata ARM: S5P: Fix end address in memory resource information for UART devices ARM: S5P64X0: Cleanup map.h file ARM: S5P6442: Cleanup map.h file ARM: S5PC100: Clenaup map.h file ARM: S5PV210: Cleanup map.h file ARM: S5PV310: Cleanup map.h file
generated by cgit (git 2.34.1) at 2025-09-14 04:43:25 +0000