summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-28iwlwifi: ACPI: support revision 3 WGDS tablesAyala Barazani
There's a new revision of the WGDS table with more data, and corresponding firmware API to pass it through. Add support for both. Since we now support 4 different versions, make a table to load them instead of hard-coding it all. Signed-off-by: Ayala Barazani <ayala.barazani@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.2f9b8e304f25.If88d2d1309270e659d4845c5b5c22d5e8d8e2caf@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28iwlwifi: pcie: update sw error interrupt for BZ familyMike Golant
The cause for sw error in BZ device family was changed Signed-off-by: Mike Golant <michael.golant@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.f674cd409b8e.I519f554d0a22d4711077785ec2bd7c564997241f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28iwlwifi: add new pci SoF with JFYaara Baruch
add new SoF JF device to the driver. Signed-off-by: Yaara Baruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.50e62c8ef85b.I3498879d8c184e42b1578a64aa7b7c99a18b75fb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28iwlwifi: mvm: Use all Rx chains for roaming scanIlan Peer
To improve chances of hearing beacons and probe responses during a scan which (based on the scan request parameters) looks like a roaming scan, enable reception on all chains. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.f115ad455aca.I5de854fe8ce58c85c21a7adf43526acb29156a08@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28iwlwifi: pcie: remove two duplicate PNJ device entriesJohannes Berg
Since PNJ and TH have the same ID (0x32), there are duplicate entries. Remove the duplicates with PNJ since PNJ is only the test device in the first place. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.0ca7c9322e69.Id2f32427795d0713fd7d2722567e604808b219dd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28iwlwifi: pcie: refactor dev_info lookupJohannes Berg
The large condition here is not very clear, refactor the code to a separate function where we can more easily just check each of the pieces separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.ef06ed58a26e.Ie9664a94b157c5781c481118d900ae428c26fdb3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28iwlwifi: pcie: remove duplicate entryJohannes Berg
This entry is literally duplicated, remove one of them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.239f82fc3737.I5fef3a20fbce77e201dc35d45be0ee526bcd3cd3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28iwlwifi: pcie: fix killer name matching for AX200Johannes Berg
The "Killer(R) Wi-Fi 6 AX1650w 160MHz Wireless Network Adapter (200D2W)" and "Killer(R) Wi-Fi 6 AX1650x 160MHz Wireless Network Adapter (200NGW)" names couldn't match properly because the most generic entry needs to be specified last. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.86a430e5b2ff.I7a9e89df7ddfc939690d3718d41afc934a4d4ea0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28iwlwifi: mvm: fix some kerneldoc issuesEmmanuel Grumbach
A few fields were missing their kerneldoc in the station capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: c8a2e7a29702 ("iwlwifi: sta: set max HE max A-MPDU according to HE capa") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.fecbcd7c2fcc.I7419f102b798ba0cecd93c80f345b241670e0683@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28arm64: Select POSIX_CPU_TIMERS_TASK_WORKNicolas Saenz Julienne
With 6caa5812e2d1 ("KVM: arm64: Use generic KVM xfer to guest work function") all arm64 exit paths are properly equipped to handle the POSIX timers' task work. Deferring timer callbacks to thread context, not only limits the amount of time spent in hard interrupt context, but is a safer implementation[1], and will allow PREEMPT_RT setups to use KVM[2]. So let's enable POSIX_CPU_TIMERS_TASK_WORK on arm64. [1] https://lore.kernel.org/all/20200716201923.228696399@linutronix.de/ [2] https://lore.kernel.org/linux-rt-users/87v92bdnlx.ffs@tglx/ Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211018144713.873464-1-nsaenzju@redhat.com Signed-off-by: Will Deacon <will@kernel.org>
2021-10-28drm/i915: Revert 'guc_id' from i915_request tracepointJoonas Lahtinen
Avoid adding backend specific data to the tracepoints outside of the LOW_LEVEL_TRACEPOINTS kernel config protection. These bits of information are bound to change depending on the selected submission method per platform and are not necessarily possible to maintain in the future. Fixes: dbf9da8d55ef ("drm/i915/guc: Add trace point for GuC submit") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211027093255.66489-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 64512a66b67e6546e2db15192b3603cd6d58b75c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2021-10-28arm64: Document boot requirements for FEAT_SME_FA64Mark Brown
The EAC1 release of the SME specification adds the FA64 feature which requires enablement at higher ELs before lower ELs can use it. Document what we require from higher ELs in our boot requirements. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211026111802.12853-1-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-10-28fuse: add FOPEN_NOFLUSHAmir Goldstein
Add flag returned by FUSE_OPEN and FUSE_CREATE requests to avoid flushing data cache on close. Different filesystems implement ->flush() is different ways: - Most disk filesystems do not implement ->flush() at all - Some network filesystem (e.g. nfs) flush local write cache of FMODE_WRITE file and send a "flush" command to server - Some network filesystem (e.g. cifs) flush local write cache of FMODE_WRITE file without sending an additional command to server FUSE flushes local write cache of ANY file, even non FMODE_WRITE and sends a "flush" command to server (if server implements it). The FUSE implementation of ->flush() seems over agressive and arbitrary and does not make a lot of sense when writeback caching is disabled. Instead of deciding on another arbitrary implementation that makes sense, leave the choice of per-file flush behavior in the hands of the server. Link: https://lore.kernel.org/linux-fsdevel/CAJfpegspE8e6aKd47uZtSYX8Y-1e1FWS0VL0DH2Skb9gQP5RJQ@mail.gmail.com/ Suggested-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: only update necessary attributesMiklos Szeredi
fuse_update_attributes() refreshes metadata for internal use. Each use needs a particular set of attributes to be refreshed, but currently that cannot be expressed and all but atime are refreshed. Add a mask argument, which lets fuse_update_get_attr() to decide based on the cache_mask and the inval_mask whether a GETATTR call is needed or not. Reported-by: Yongji Xie <xieyongji@bytedance.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: take cache_mask into account in getattrMiklos Szeredi
When deciding to send a GETATTR request take into account the cache mask (which attributes are always valid). The cache mask takes precedence over the invalid mask. This results in the GETATTR request not being sent unnecessarily. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: add cache_maskMiklos Szeredi
If writeback_cache is enabled, then the size, mtime and ctime attributes of regular files are always valid in the kernel's cache. They are retrieved from userspace only when the inode is freshly looked up. Add a more generic "cache_mask", that indicates which attributes are currently valid in cache. This patch doesn't change behavior. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: move reverting attributes to fuse_change_attributes()Miklos Szeredi
In case of writeback_cache fuse_fillattr() would revert the queried attributes to the cached version. Move this to fuse_change_attributes() in order to manage the writeback logic in a central helper. This will be necessary for patches that follow. Only fuse_do_getattr() -> fuse_fillattr() uses the attributes after calling fuse_change_attributes(), so this should not change behavior. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: simplify local variables holding writeback cache stateMiklos Szeredi
There are two instances of "bool is_wb = fc->writeback_cache" where the actual use mostly involves checking "is_wb && S_ISREG(inode->i_mode)". Clean up these cases by storing the second condition in the local variable. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: cleanup code conditional on fc->writeback_cacheMiklos Szeredi
It's safe to call file_update_time() if writeback cache is not enabled, since S_NOCMTIME is set in this case. This part is purely a cleanup. __fuse_copy_file_range() also calls fuse_write_update_attr() only in the writeback cache case. This is inconsistent with other callers, where it's called unconditionally. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: fix attr version comparison in fuse_read_update_size()Miklos Szeredi
A READ request returning a short count is taken as indication of EOF, and the cached file size is modified accordingly. Fix the attribute version checking to allow for changes to fc->attr_version on other inodes. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: always invalidate attributes after writesMiklos Szeredi
Extend the fuse_write_update_attr() helper to invalidate cached attributes after a write. This has already been done in all cases except in fuse_notify_store(), so this is mostly a cleanup. fuse_direct_write_iter() calls fuse_direct_IO() which already calls fuse_write_update_attr(), so don't repeat that again in the former. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: rename fuse_write_update_size()Miklos Szeredi
This function already updates the attr_version in fuse_inode, regardless of whether the size was changed or not. Rename the helper to fuse_write_update_attr() to reflect the more generic nature. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: don't bump attr_version in cached writeMiklos Szeredi
The attribute version in fuse_inode should be updated whenever the attributes might have changed on the server. In case of cached writes this is not the case, so updating the attr_version is unnecessary and could possibly affect performance. Open code the remaining part of fuse_write_update_size(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: selective attribute invalidationMiklos Szeredi
Only invalidate attributes that the operation might have changed. Introduce two constants for common combinations of changed attributes: FUSE_STATX_MODIFY: file contents are modified but not size FUSE_STATX_MODSIZE: size and/or file contents modified Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: don't increment nlink in link()Miklos Szeredi
The fuse_iget() call in create_new_entry() already updated the inode with all the new attributes and incremented the attribute version. Incrementing the nlink will result in the wrong count. This wasn't noticed because the attributes were invalidated right after this. Updating ctime is still needed for the writeback case when the ctime is not refreshed. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28ath6kl: fix division by zero in send pathJohan Hovold
Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in ath10k_usb_hif_tx_sg() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 9cbee358687e ("ath6kl: add full USB support") Cc: stable@vger.kernel.org # 3.5 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027080819.6675-3-johan@kernel.org
2021-10-28ath10k: fix division by zero in send pathJohan Hovold
Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in ath10k_usb_hif_tx_sg() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 4db66499df91 ("ath10k: add initial USB support") Cc: stable@vger.kernel.org # 4.14 Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027080819.6675-2-johan@kernel.org
2021-10-28ath6kl: fix control-message timeoutJohan Hovold
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 241b128b6b69 ("ath6kl: add back beginnings of USB support") Cc: stable@vger.kernel.org # 3.4 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-3-johan@kernel.org
2021-10-28ath10k: fix control-message timeoutJohan Hovold
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 4db66499df91 ("ath10k: add initial USB support") Cc: stable@vger.kernel.org # 4.14 Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-2-johan@kernel.org
2021-10-28wcn36xx: add missing 5GHz channels 136 and 144Benjamin Li
The official feature-complete WCN3680B driver (known as prima, open source but not upstream) supports channels 136 and 144. However, these channels are missing in upstream. Add them here to get closer to feature parity with prima. Signed-off-by: Benjamin Li <benl@squareup.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025175359.3591048-3-benl@squareup.com
2021-10-28wcn36xx: switch on antenna diversity feature bitBenjamin Li
The official feature-complete WCN3680B driver (known as prima, open source but not upstream) sends this feature bit. As we wish to support the antenna diversity feature in upstream, we need to set this bit as well. Signed-off-by: Benjamin Li <benl@squareup.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025175359.3591048-2-benl@squareup.com
2021-10-28wcn36xx: Channel list update before hardware scanLoic Poulain
The channel scan list must be updated before triggering a hardware scan so that firmware takes into account the regulatory info for each single channel such as active/passive config, power, DFS, etc... Without this the firmware uses its own internal default channel configuration, which is not aligned with mac80211 regulatory rules, and misses several channels (e.g. 144). Fixes: 2f3bef4b247e ("wcn36xx: Add hardware scan offload support") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635175328-25642-1-git-send-email-loic.poulain@linaro.org
2021-10-28Merge tag 'drm-misc-fixes-2021-10-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes One patch to fix the default screen orientation on the GPD Win3 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211028072300.b4gqexq6zfhby24g@gilmour
2021-10-28drm: Add R10 and R12 FourCCLaurent Pinchart
Add FourCCs for 10- and 12-bit red formats with padding to 16 bits. They correspond to the V4L2 10- and 12-bit greyscale (V4L2_PIX_FMT_Y10 and V4L2_PIX_FMT_Y12) formats, as well as the Bayer formats with the same bit depth (V4L2_PIX_FMT_SBGGR{10,12} and all other Bayer pattern permutations). These formats are not used by any kernel driver at this point, but need to be exposed to applications by libcamera, which uses DRM FourCCs for pixel formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211027233140.12268-1-laurent.pinchart@ideasonboard.com
2021-10-28ALSA: firewire-motu: export meter information to userspace as float valueTakashi Sakamoto
In command DSP models, one meter information consists of 4 bytes for IEEE 764 floating point (binary32). In previous patch, it is exported to userspace as 32 bit storage since the storage is also handled in ALSA firewire-motu driver as well in kernel space in which floating point arithmetic is not preferable. On the other hand, ALSA firewire-motu driver doesn't perform floating point calculation. The driver just gather meter information from isochronous packets and fill structure fields for userspace. In 'header' target of Kbuild, UAPI headers are processed before installed. In this timing, #ifdef macro with __KERNEL__ is removed. This mechanism is useful in the case so that the 32 bit storage can be accessible as u32 type in kernel space and float type in user space. We can see the same usage in ''struct acct_v3' in 'include/uapi/linux/acct.h'. This commit is for the above idea. Additionally, due to message protocol, meter information is filled with 0xffffffff in the end of period but 0xffffffff is invalid as binary32. To avoid confusion in userspace application, the last two elements are left without any assignment. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211027125529.54295-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: firewire-motu: refine parser for meter information in register DSP modelsTakashi Sakamoto
After further investigation, I realize that the total number of elements in array is not enough to store all of related messages from device. This commit refines meter array and message parser. In terms of channel identifier, register DSP models are classified to two categories: 1. the target of output is selectable 828mk2, 896hd, and Traveler are in the category. They transfer messages with channel identifier between 0x00 and 0x13 for input meters, therefore 20 elements are needed to store. On the other hand, they transfer messages with channel identifier for one pair of output meters. The selection is done by asynchronous write transaction to offset 0x'ffff'f000'0b2c. The table for relationship between written value and available identifiers is below: ============= =============== written value identifier pair ============= =============== 0x00000b00 0x80/0x81 0x00000b01 0x82/0x83 ... ... 0x00000b0b 0x96/0x97 ... ... 0x00000b10 0xa0/0xa1 ... ... 0x00000b3f 0xfe/0xff ... ... greater 0xfe/0xff ============= =============== Actually in the above three models, 0x96/0x97 pair is the maximum. Thus the number of available output meter is 24. 2. all of output is available 8 pre, Ultralite, Audio Express, and 4 pre are in the category. They transfer messages for output meters without any selection. The table for available identifier for each direction is below: ============== ========= ========== model input output ============== ========= ========== 8 pre 0x00-0x0f 0x82-0x8d Ultralite 0x00-0x09 0x82-0x8f Audio Express 0x00-0x09 0x80-0x8d 4 pre 0x00-0x09 0x80-0x8d ============== ========= ========== Some of available identifiers might not be used for actual output meters. Anyway, 24 plus 24 elements accommodate the input/output meters. I note that isochronous packet from V3HD/V4HD deliver no message. Notification by asynchronous transaction to registered address seems to be used for the purpose as well as for change of mixer parameter. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211027125529.54295-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: firewire-motu: fix null pointer dereference when polling hwdep ↵Takashi Sakamoto
character device ALSA firewire-motu driver recently got support for event notification via ALSA HwDep interface for register DSP models. However, when polling ALSA HwDep cdev, the driver can cause null pointer dereference for the other models due to accessing to unallocated memory or uninitialized memory. This commit fixes the bug by check the type of model before accessing to the memory. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211027125529.54295-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: hda/realtek: Add a quirk for HP OMEN 15 mute LEDTakashi Iwai
HP OMEN 15 laptop requires the quirk to fiddle with COEF 0x0b bit 2 for toggling the mute LED. It's already implemented for other HP laptops, and we just need to add a proper fixup entry. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214735 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211028070911.18891-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28powerpc/security: Use a mutex for interrupt exit code patchingRussell Currey
The mitigation-patching.sh script in the powerpc selftests toggles all mitigations on and off simultaneously, revealing that rfi_flush and stf_barrier cannot safely operate at the same time due to races in updating the static key. On some systems, the static key code throws a warning and the kernel remains functional. On others, the kernel will hang or crash. Fix this by slapping on a mutex. Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211027072410.40950-1-ruscur@russell.cc
2021-10-28xfrm: Remove redundant fields and related parenthesesluo penghao
The variable err is not necessary in such places. It should be revmoved for the simplicity of the code. This will cause the double parentheses to be redundant, and the inner parentheses should be deleted. The clang_analyzer complains as follows: net/xfrm/xfrm_input.c:533: warning: net/xfrm/xfrm_input.c:563: warning: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'. Changes in v2: Modify the title, because v2 removes the brackets. Remove extra parentheses. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-10-28Merge tag 'drm-misc-fixes-2021-10-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc8: - Fix fence leak in ttm_transfered_destroy. - Add quirk for Aya Neo 2021 - Reset property count for each drm damage selftest so full run will work correctly. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4a133970-ff4b-aa62-d346-b269b1b9236e@linux.intel.com
2021-10-28Merge tag 'amd-drm-fixes-5.15-2021-10-27' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-10-27: amdgpu: - Display fixes for DCN 3.1 - Fix potential out of bounds write in debugfs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211028023130.4528-1-alexander.deucher@amd.com
2021-10-28Merge tag 'drm-msm-next-2021-10-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next * eDP support in DP sub-driver (for newer SoCs with native eDP output) * dpu irq handling cleanup * CRC support for making igt happy * Support for NO_CONNECTOR bridges * dsi: 14nm phy support for msm8953 * mdp5: support for msm8x53, sdm450, sdm632 * various smaller fixes and cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsH9EwcpqGNNRJeL99NvFFjHX3SUg+nTYu0dHG5U9+QuA@mail.gmail.com
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-27Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into net-next Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-27scsi: sr: Remove duplicate assignmentAlexey Dobriyan
Link: https://lore.kernel.org/r/YXgybUhYN+Vrruj8@localhost.localdomain Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-27scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual hostChanho Park
Introduce virtual host driver for ExynosAuto v9 UFS mHCI. The VH (Virtual Host) only supports data transfer functions so most of physical features must be disabled by setting the following quirks: - UFSHCD_QUIRK_BROKEN_UIC_CMD - UFSHCD_QUIRK_SKIP_PH_CONFIGURATION Before initialization, the VH must wait until PH is ready. This wait is currently implemented via polling. Link: https://lore.kernel.org/r/20211018124216.153072-15-chanho61.park@samsung.com Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Kiwoong Kim <kwmad.kim@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-27scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9Chanho Park
The UFS controller of the ExynosAuto v9 SoC supports a multi-host interface for I/O virtualization. In general, we're using para-virtualized driver to support a block device by several virtual machines. Multi-host functionality extends the host controller by providing register interfaces that can be used by each VM's UFS drivers respectively. This way we can provide direct access to the UFS device for multiple VMs similar to PCIe SR-IOV. We divide this M-HCI as PH (Physical Host) and VHs (Virtual Host). The PH supports all UFSHCI functions (all SAPs) like a conventional UFSHCI but the VH only supports data transfer functions. Thus, except UTP_CMD_SAP and UTP_TMPSAP, the PH should handle all the physical features. Provide an initial implementation of PH part. M-HCI can support up to four interfaces (1 for a PH and 3 for VHs) but this patch initially supports only 1 PH and 1 VH. For this, we uses TASK_TAG[7:5] field so TASK_TAG[4:0] for 32 doorbell will be supported. After the PH is initiated, this will send a ready message to VHs through a mailbox register. The message handler is not fully implemented yet such as supporting reset / abort cases. Link: https://lore.kernel.org/r/20211018124216.153072-14-chanho61.park@samsung.com Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Kiwoong Kim <kwmad.kim@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-27scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFSChanho Park
Add support for the ExynosAuto v9 SoC. This requires controlling the UFS IP shareability register via syscon and regmap. The offset of the register can be different according to the UFS instance and SoC specific offset value. As a result, we need to get the offset value from DT property. Unlike exynos7, this implementation has a different M-PHY setting which must be configured via exynosauto_ufs_pre_link. Link: https://lore.kernel.org/r/20211018124216.153072-12-chanho61.park@samsung.com Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Kiwoong Kim <kwmad.kim@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-27scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacksChanho Park
Add driver-specific pre/post_hce_enable callbacks to execute extra initializations before and after hce_enable_notify callback. Link: https://lore.kernel.org/r/20211018124216.153072-11-chanho61.park@samsung.com Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Kiwoong Kim <kwmad.kim@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-23 12:57:24 +0000