| Age | Commit message (Collapse) | Author |
|---|
|
enlightened guest
Hypervisor needs to access input arg, VMBus synic event and
message pages. Mark these pages unencrypted in the SEV-SNP
guest and free them only if they have been marked encrypted
successfully.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-5-ltykernel@gmail.com
|
|
hv vp assist page needs to be shared between SEV-SNP guest and Hyper-V.
So mark the page unencrypted in the SEV-SNP guest.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-4-ltykernel@gmail.com
|
|
SEV-SNP guests on Hyper-V can run at multiple Virtual Trust
Levels (VTL). During boot, get the VTL at which we're running
using the GET_VP_REGISTERs hypercall, and save the value
for future use. Then during VMBus initialization, set the VTL
with the saved value as required in the VMBus init message.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-3-ltykernel@gmail.com
|
|
Introduce static key isolation_type_en_snp for enlightened
sev-snp guest check.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-2-ltykernel@gmail.com
|
|
Merge series from Yang Yingliang <yangyingliang@huawei.com>:
I'm trying to rename the legacy name to modern name used in SPI drivers,
this is part4 patchset.
After introducing devm_spi_alloc_host/spi_alloc_host(), the legacy
named function devm_spi_alloc_master/spi_alloc_master() can be replaced.
And also change other legacy name master/slave to modern name host/target
or controller. Each patch compile test passed.
|
|
Merge series from like@awinic.com:
Add regulator driver for the device Awinic AW37503 which is
single inductor - dual output power supply device. AW37503
device is designed to support general positive/negative
driven applications like TFT display panels.
|
|
Jiri Olsa says:
====================
bpf: Add multi uprobe link
hi,
this patchset is adding support to attach multiple uprobes and usdt probes
through new uprobe_multi link.
The current uprobe is attached through the perf event and attaching many
uprobes takes a lot of time because of that.
The main reason is that we need to install perf event for each probed function
and profile shows perf event installation (perf_install_in_context) as culprit.
The new uprobe_multi link just creates raw uprobes and attaches the bpf
program to them without perf event being involved.
In addition to being faster we also save file descriptors. For the current
uprobe attach we use extra perf event fd for each probed function. The new
link just need one fd that covers all the functions we are attaching to.
v7 changes:
- fixed task release on error path and re-org the error
path to be more straightforward [Yonghong]
- re-organized uprobe_prog_run locking to follow general pattern
and removed might_fault check as it's not needed in uprobe/task
context [Yonghong]
There's support for bpftrace [2] and tetragon [1].
Also available at:
https://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
uprobe_multi
thanks,
jirka
[1] https://github.com/cilium/tetragon/pull/936
[2] https://github.com/iovisor/bpftrace/compare/master...olsajiri:bpftrace:uprobe_multi
[3] https://lore.kernel.org/bpf/20230628115329.248450-1-laoar.shao@gmail.com/
---
====================
Link: https://lore.kernel.org/r/20230809083440.3209381-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Attaching extra program to same functions system wide for api
and link tests.
This way we can test the pid filter works properly when there's
extra system wide consumer on the same uprobe that will trigger
the original uprobe handler.
We expect to have the same counts as before.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-29-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Running api and link tests also with pid filter and checking
the probe gets executed only for specific pid.
Spawning extra process to trigger attached uprobes and checking
we get correct counts from executed programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-28-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding test for cookies setup/retrieval in uprobe_link uprobes
and making sure bpf_get_attach_cookie works properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-27-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding test that attaches 50k usdt probes in usdt_multi binary.
After the attach is done we run the binary and make sure we get
proper amount of hits.
With current uprobes:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
1353.659680562 seconds time elapsed
With uprobe_multi link:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
0.322046364 seconds time elapsed
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-26-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding code in uprobe_multi test binary that defines 50k usdts
and will serve as attach point for uprobe_multi usdt bench test
in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-25-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding test that attaches 50k uprobes in uprobe_multi binary.
After the attach is done we run the binary and make sure we
get proper amount of hits.
The resulting attach/detach times on my setup:
test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec
test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec
test_bench_attach_uprobe:PASS:uprobes_count 0 nsec
test_bench_attach_uprobe: attached in 0.346s
test_bench_attach_uprobe: detached in 0.419s
#262/5 uprobe_multi_test/bench_uprobe:OK
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-24-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding uprobe_multi test program that defines 50k uprobe_multi_func_*
functions and will serve as attach point for uprobe_multi bench test
in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-23-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding uprobe_multi test for bpf_link_create attach function.
Testing attachment using the struct bpf_link_create_opts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-22-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding uprobe_multi test for bpf_program__attach_uprobe_multi
attach function.
Testing attachment using glob patterns and via bpf_uprobe_multi_opts
paths/syms fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-21-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding uprobe_multi test for skeleton load/attach functions,
to test skeleton auto attach for uprobe_multi link.
Test that bpf_get_func_ip works properly for uprobe_multi
attachment.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-20-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We'd like to have single copy of get_time_ns used b bench and test_progs,
but we can't just include bench.h, because of conflicting 'struct env'
objects.
Moving get_time_ns to testing_helpers.h which is being included by both
bench and test_progs objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-19-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding support for usdt_manager_attach_usdt to use uprobe_multi
link to attach to usdt probes.
The uprobe_multi support is detected before the usdt program is
loaded and its expected_attach_type is set accordingly.
If uprobe_multi support is detected the usdt_manager_attach_usdt
gathers uprobes info and calls bpf_program__attach_uprobe to
create all needed uprobes.
If uprobe_multi support is not detected the old behaviour stays.
Also adding usdt.s program section for sleepable usdt probes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-18-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding uprobe-multi link detection. It will be used later in
bpf_program__attach_usdt function to check and use uprobe_multi
link over standard uprobe links.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-17-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding support for several uprobe_multi program sections
to allow auto attach of multi_uprobe programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding bpf_program__attach_uprobe_multi function that
allows to attach multiple uprobes with uprobe_multi link.
The user can specify uprobes with direct arguments:
binary_path/func_pattern/pid
or with struct bpf_uprobe_multi_opts opts argument fields:
const char **syms;
const unsigned long *offsets;
const unsigned long *ref_ctr_offsets;
const __u64 *cookies;
User can specify 2 mutually exclusive set of inputs:
1) use only path/func_pattern/pid arguments
2) use path/pid with allowed combinations of:
syms/offsets/ref_ctr_offsets/cookies/cnt
- syms and offsets are mutually exclusive
- ref_ctr_offsets and cookies are optional
Any other usage results in error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-15-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding new uprobe_multi struct to bpf_link_create_opts object
to pass multiple uprobe data to link_create attr uapi.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-14-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding elf_resolve_pattern_offsets function that looks up
offsets for symbols specified by pattern argument.
The 'pattern' argument allows wildcards (*?' supported).
Offsets are returned in allocated array together with its
size and needs to be released by the caller.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-13-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding elf_resolve_syms_offsets function that looks up
offsets for symbols specified in syms array argument.
Offsets are returned in allocated array with the 'cnt' size,
that needs to be released by the caller.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-12-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding elf symbol iterator object (and some functions) that follow
open-coded iterator pattern and some functions to ease up iterating
elf object symbols.
The idea is to iterate single symbol section with:
struct elf_sym_iter iter;
struct elf_sym *sym;
if (elf_sym_iter_new(&iter, elf, binary_path, SHT_DYNSYM))
goto error;
while ((sym = elf_sym_iter_next(&iter))) {
...
}
I considered opening the elf inside the iterator and iterate all symbol
sections, but then it gets more complicated wrt user checks for when
the next section is processed.
Plus side is the we don't need 'exit' function, because caller/user is
in charge of that.
The returned iterated symbol object from elf_sym_iter_next function
is placed inside the struct elf_sym_iter, so no extra allocation or
argument is needed.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-11-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding elf_open/elf_close functions and using it in
elf_find_func_offset_from_file function. It will be
used in following changes to save some common code.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-10-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding new elf object that will contain elf related functions.
There's no functional change.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-9-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding new uprobe_multi attach type and link names,
so the functions can resolve the new values.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-8-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding support for bpf_get_func_ip helper being called from
ebpf program attached by uprobe_multi link.
It returns the ip of the uprobe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding support to specify pid for uprobe_multi link and the uprobes
are created only for task with given pid value.
Using the consumer.filter filter callback for that, so the task gets
filtered during the uprobe installation.
We still need to check the task during runtime in the uprobe handler,
because the handler could get executed if there's another system
wide consumer on the same uprobe (thanks Oleg for the insight).
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding support to specify cookies array for uprobe_multi link.
The cookies array share indexes and length with other uprobe_multi
arrays (offsets/ref_ctr_offsets).
The cookies[i] value defines cookie for i-the uprobe and will be
returned by bpf_get_attach_cookie helper when called from ebpf
program hooked to that specific uprobe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding new multi uprobe link that allows to attach bpf program
to multiple uprobes.
Uprobes to attach are specified via new link_create uprobe_multi
union:
struct {
__aligned_u64 path;
__aligned_u64 offsets;
__aligned_u64 ref_ctr_offsets;
__u32 cnt;
__u32 flags;
} uprobe_multi;
Uprobes are defined for single binary specified in path and multiple
calling sites specified in offsets array with optional reference
counters specified in ref_ctr_offsets array. All specified arrays
have length of 'cnt'.
The 'flags' supports single bit for now that marks the uprobe as
return probe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add extra attach_type checks from link_create under
bpf_prog_attach_check_attach_type.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Switching BPF_F_KPROBE_MULTI_RETURN macro to anonymous enum,
so it'd show up in vmlinux.h. There's not functional change
compared to having this as macro.
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As pointed out by Bjorn and Mike in [1], we can simplify the handling
of enable_mask-based BCMs. This series attempts to do so and fixes a bug
that snuck in.
Gave a quick spin on 8450, doesn't seem to have exploded.
[1] https://lore.kernel.org/linux-arm-msm/113b50f8-35f6-73fc-4fc9-302262927c5e@quicinc.com/
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-0-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
BCMs with an enable_mask expect to only have that specific value written
to them. The current implementation only works by miracle for BCMs with
enable mask == BIT(0), as the minimal vote we've been using so far just
so happens to be equal to that.
Use the correct value with keepalive voting.
Fixes: d8630f050d3f ("interconnect: qcom: Add support for mask-based BCMs")
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-2-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
We don't need all the complex arithmetic for BCMs utilizing enable_mask,
as all we need to do is to determine whether there's any user (or
keepalive) asking for it to be on.
Separate the logic for such BCMs for a small speed boost.
Suggested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-1-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Daniel T. Lee says:
====================
samples/bpf: make BPF programs more libbpf aware
The existing tracing programs have been developed for a considerable
period of time and, as a result, do not properly incorporate the
features of the current libbpf, such as CO-RE. This is evident in
frequent usage of functions like PT_REGS* and the persistence of "hack"
methods using underscore-style bpf_probe_read_kernel from the past.
These programs are far behind the current level of libbpf and can
potentially confuse users.
The kernel has undergone significant changes, and some of these changes
have broken these programs, but on the other hand, more robust APIs have
been developed for increased stableness.
To list some of the kernel changes that this patch set is focusing on,
- symbol mismatch occurs due to compiler optimization [1]
- inline of blk_account_io* breaks BPF kprobe program [2]
- new tracepoints for the block_io_start/done are introduced [3]
- map lookup probes can't be triggered (bpf_disable_instrumentation)[4]
- BPF_KSYSCALL has been introduced to simplify argument fetching [5]
- convert to vmlinux.h and use tp argument structure within it
- make tracing programs to be more CO-RE centric
In this regard, this patch set aims not only to integrate the latest
features of libbpf into BPF programs but also to reduce confusion and
clarify the BPF programs. This will help with the potential confusion
among users and make the programs more intutitive.
[1]: https://github.com/iovisor/bcc/issues/1754
[2]: https://github.com/iovisor/bcc/issues/4261
[3]: commit 5a80bd075f3b ("block: introduce block_io_start/block_io_done tracepoints")
[4]: commit 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup potential deadlock")
[5]: commit 6f5d467d55f0 ("libbpf: improve BPF_KPROBE_SYSCALL macro and rename it to BPF_KSYSCALL")
====================
Link: https://lore.kernel.org/r/20230818090119.477441-1-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With the introduction of kprobe.multi, it is now possible to attach
multiple kprobes to a single BPF program without the need for multiple
definitions. Additionally, this method supports wildcard-based
matching, allowing for further simplification of BPF programs. In here,
an asterisk (*) wildcard is used to map to all symbols relevant to
spin_{lock|unlock}.
Furthermore, since kprobe.multi handles symbol matching, this commit
eliminates the need for the previous logic of reading the ksym table to
verify the existence of symbols.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-10-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit refactors the syscall tracing programs by adopting the
BPF_KSYSCALL macro. This change aims to enhance the clarity and
simplicity of the BPF programs by reducing the complexity of argument
parsing from pt_regs.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-9-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In the commit 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup
potential deadlock"), a potential deadlock issue was addressed, which
resulted in *_map_lookup_elem not triggering BPF programs.
(prior to lookup, bpf_disable_instrumentation() is used)
To resolve the broken map lookup probe using "htab_map_lookup_elem",
this commit introduces an alternative approach. Instead, it utilize
"bpf_map_copy_value" and apply a filter specifically for the hash table
with map_type.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Fixes: 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup potential deadlock")
Link: https://lore.kernel.org/r/20230818090119.477441-8-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Recently, a new tracepoint for the block layer, specifically the
block_io_start/done tracepoints, was introduced in commit 5a80bd075f3b
("block: introduce block_io_start/block_io_done tracepoints").
Previously, the kprobe entry used for this purpose was quite unstable
and inherently broke relevant probes [1]. Now that a stable tracepoint
is available, this commit replaces the bio latency check with it.
One of the changes made during this replacement is the key used for the
hash table. Since 'struct request' cannot be used as a hash key, the
approach taken follows that which was implemented in bcc/biolatency [2].
(uses dev:sector for the key)
[1]: https://github.com/iovisor/bcc/issues/4261
[2]: https://github.com/iovisor/bcc/pull/4691
Fixes: 450b7879e345 ("block: move blk_account_io_{start,done} to blk-mq.c")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-7-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The existing tracing programs have been developed for a considerable
period of time and, as a result, do not properly incorporate the
features of the current libbpf, such as CO-RE. This is evident in
frequent usage of functions like PT_REGS* and the persistence of "hack"
methods using underscore-style bpf_probe_read_kernel from the past.
These programs are far behind the current level of libbpf and can
potentially confuse users. Therefore, this commit aims to convert the
outdated BPF programs to be more CO-RE centric.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-6-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, multiple kprobe programs are suffering from symbol mismatch
due to compiler optimization. These optimizations might induce
additional suffix to the symbol name such as '.isra' or '.constprop'.
# egrep ' finish_task_switch| __netif_receive_skb_core' /proc/kallsyms
ffffffff81135e50 t finish_task_switch.isra.0
ffffffff81dd36d0 t __netif_receive_skb_core.constprop.0
ffffffff8205cc0e t finish_task_switch.isra.0.cold
ffffffff820b1aba t __netif_receive_skb_core.constprop.0.cold
To avoid this, this commit replaces the original kprobe section to
kprobe.multi in order to match symbol with wildcard characters. Here,
asterisk is used for avoiding symbol mismatch.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-5-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, BPF programs typically have a suffix of .bpf.c. However,
some programs still utilize a mixture of _kern.c suffix alongside the
naming convention. In order to achieve consistency in the naming of
these programs, this commit unifies the inconsistency in the naming
convention of BPF kernel programs.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-4-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit replaces separate headers with a single vmlinux.h to
tracing programs. Thanks to that, we no longer need to define the
argument structure for tracing programs directly. For example, argument
for the sched_switch tracpepoint (sched_switch_args) can be replaced
with the vmlinux.h provided trace_event_raw_sched_switch.
Additional defines have been added to the BPF program either directly
or through the inclusion of net_shared.h. Defined values are
PERF_MAX_STACK_DEPTH, IFNAMSIZ constants and __stringify() macro. This
change enables the BPF program to access internal structures with BTF
generated "vmlinux.h" header.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-3-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, compiling the bpf programs will result the warning with the
ignored attribute as follows. This commit fixes the warning by adding
cf-protection option.
In file included from ./arch/x86/include/asm/linkage.h:6:
./arch/x86/include/asm/ibt.h:77:8: warning: 'nocf_check' attribute ignored; use -fcf-protection to enable the attribute [-Wignored-attributes]
extern __noendbr u64 ibt_save(bool disable);
^
./arch/x86/include/asm/ibt.h:32:34: note: expanded from macro '__noendbr'
^
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-2-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Teach lockdep that icc_bw_lock is needed in code paths that could
deadlock if they trigger reclaim.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20230807171148.210181-8-robdclark@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
For cases where icc_bw_set() can be called in callbaths that could
deadlock against shrinker/reclaim, such as runpm resume, we need to
decouple the icc locking. Introduce a new icc_bw_lock for cases where
we need to serialize bw aggregation and update to decouple that from
paths that require memory allocation such as node/link creation/
destruction.
Fixes this lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc8-debug+ #554 Not tainted
------------------------------------------------------
ring0/132 is trying to acquire lock:
ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234
but task is already holding lock:
ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (dma_fence_map){++++}-{0:0}:
__dma_fence_might_wait+0x74/0xc0
dma_resv_lockdep+0x1f4/0x2f4
do_one_initcall+0x104/0x2bc
kernel_init_freeable+0x344/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
fs_reclaim_acquire+0x80/0xa8
slab_pre_alloc_hook.constprop.0+0x40/0x25c
__kmem_cache_alloc_node+0x60/0x1cc
__kmalloc+0xd8/0x100
topology_parse_cpu_capacity+0x8c/0x178
get_cpu_for_node+0x88/0xc4
parse_cluster+0x1b0/0x28c
parse_cluster+0x8c/0x28c
init_cpu_topology+0x168/0x188
smp_prepare_cpus+0x24/0xf8
kernel_init_freeable+0x18c/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #2 (fs_reclaim){+.+.}-{0:0}:
__fs_reclaim_acquire+0x3c/0x48
fs_reclaim_acquire+0x54/0xa8
slab_pre_alloc_hook.constprop.0+0x40/0x25c
__kmem_cache_alloc_node+0x60/0x1cc
__kmalloc+0xd8/0x100
kzalloc.constprop.0+0x14/0x20
icc_node_create_nolock+0x4c/0xc4
icc_node_create+0x38/0x58
qcom_icc_rpmh_probe+0x1b8/0x248
platform_probe+0x70/0xc4
really_probe+0x158/0x290
__driver_probe_device+0xc8/0xe0
driver_probe_device+0x44/0x100
__driver_attach+0xf8/0x108
bus_for_each_dev+0x78/0xc4
driver_attach+0x2c/0x38
bus_add_driver+0xd0/0x1d8
driver_register+0xbc/0xf8
__platform_driver_register+0x30/0x3c
qnoc_driver_init+0x24/0x30
do_one_initcall+0x104/0x2bc
kernel_init_freeable+0x344/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #1 (icc_lock){+.+.}-{3:3}:
__mutex_lock+0xcc/0x3c8
mutex_lock_nested+0x30/0x44
icc_set_bw+0x88/0x2b4
_set_opp_bw+0x8c/0xd8
_set_opp+0x19c/0x300
dev_pm_opp_set_opp+0x84/0x94
a6xx_gmu_resume+0x18c/0x804
a6xx_pm_resume+0xf8/0x234
adreno_runtime_resume+0x2c/0x38
pm_generic_runtime_resume+0x30/0x44
__rpm_callback+0x15c/0x174
rpm_callback+0x78/0x7c
rpm_resume+0x318/0x524
__pm_runtime_resume+0x78/0xbc
adreno_load_gpu+0xc4/0x17c
msm_open+0x50/0x120
drm_file_alloc+0x17c/0x228
drm_open_helper+0x74/0x118
drm_open+0xa0/0x144
drm_stub_open+0xd4/0xe4
chrdev_open+0x1b8/0x1e4
do_dentry_open+0x2f8/0x38c
vfs_open+0x34/0x40
path_openat+0x64c/0x7b4
do_filp_open+0x54/0xc4
do_sys_openat2+0x9c/0x100
do_sys_open+0x50/0x7c
__arm64_sys_openat+0x28/0x34
invoke_syscall+0x8c/0x128
el0_svc_common.constprop.0+0xa0/0x11c
do_el0_svc+0xac/0xbc
el0_svc+0x48/0xa0
el0t_64_sync_handler+0xac/0x13c
el0t_64_sync+0x190/0x194
-> #0 (&gmu->lock){+.+.}-{3:3}:
__lock_acquire+0xe00/0x1060
lock_acquire+0x1e0/0x2f8
__mutex_lock+0xcc/0x3c8
mutex_lock_nested+0x30/0x44
a6xx_pm_resume+0xf0/0x234
adreno_runtime_resume+0x2c/0x38
pm_generic_runtime_resume+0x30/0x44
__rpm_callback+0x15c/0x174
rpm_callback+0x78/0x7c
rpm_resume+0x318/0x524
__pm_runtime_resume+0x78/0xbc
pm_runtime_get_sync.isra.0+0x14/0x20
msm_gpu_submit+0x58/0x178
msm_job_run+0x78/0x150
drm_sched_main+0x290/0x370
kthread+0xf0/0x100
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
&gmu->lock --> mmu_notifier_invalidate_range_start --> dma_fence_map
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(dma_fence_map);
lock(mmu_notifier_invalidate_range_start);
lock(dma_fence_map);
lock(&gmu->lock);
*** DEADLOCK ***
2 locks held by ring0/132:
#0: ffffff8087191170 (&gpu->lock){+.+.}-{3:3}, at: msm_job_run+0x64/0x150
#1: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150
stack backtrace:
CPU: 7 PID: 132 Comm: ring0 Not tainted 6.2.0-rc8-debug+ #554
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Call trace:
dump_backtrace.part.0+0xb4/0xf8
show_stack+0x20/0x38
dump_stack_lvl+0x9c/0xd0
dump_stack+0x18/0x34
print_circular_bug+0x1b4/0x1f0
check_noncircular+0x78/0xac
__lock_acquire+0xe00/0x1060
lock_acquire+0x1e0/0x2f8
__mutex_lock+0xcc/0x3c8
mutex_lock_nested+0x30/0x44
a6xx_pm_resume+0xf0/0x234
adreno_runtime_resume+0x2c/0x38
pm_generic_runtime_resume+0x30/0x44
__rpm_callback+0x15c/0x174
rpm_callback+0x78/0x7c
rpm_resume+0x318/0x524
__pm_runtime_resume+0x78/0xbc
pm_runtime_get_sync.isra.0+0x14/0x20
msm_gpu_submit+0x58/0x178
msm_job_run+0x78/0x150
drm_sched_main+0x290/0x370
kthread+0xf0/0x100
ret_from_fork+0x10/0x20
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20230807171148.210181-7-robdclark@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
