summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-08ALSA: hda/realtek - Make more stable to get pin sense for ALC283Kailang Yang
Pin sense will active when power pin is wake up. Power pin will not wake up immediately during resume state. Add some delay to wait for power pin activated. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-08[media] ov2640: add missing consumer.h includeHans Verkuil
Needed for mips and sh platforms Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08[media] sur40: fix occasional hard freeze due to buffer queue underrunFlorian Echtler
This patch fixes a kernel panic which occurs when buf_list is empty. This can happen occasionally when user space is under heavy load (e.g. due to image processing on the CPU) and new buffers aren't re-queued fast enough. In that case, vb2_start_streaming_called can return true, but when the spinlock is taken and sur40_poll attempts to fetch the next buffer from buf_list, the list is in fact empty. This patch needs to be applied on top of the queued one adding V4L2 support to the sur40 driver. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08[media] cx23885: Always initialise dev->slock spinlockDavid Howells
The slock spinlock in the cx23885_dev struct is only initialised if analogue video is being used, but is used in other places too, leading to the attached lockdep complaint. Move the lock initialisation so that it is done unconditionally. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 4413 Comm: scandvb Tainted: G W 4.0.0-rc1-fsdevel+ #25 Hardware name: System manufacturer System Product Name/P5Q PRO TURBO, BIOS 0701 10/08/2012 0000000000000000 ffff880129d779d8 ffffffff8162bbdf 0000000000000006 0000000000000000 ffff880129d77aa8 ffffffff810780e3 0000000000000001 0000000000000046 0000000000000004 ffffffff81c3f180 0000000000000000 Call Trace: [<ffffffff8162bbdf>] dump_stack+0x4c/0x65 [<ffffffff810780e3>] __lock_acquire+0x7b5/0x1a0e [<ffffffff810799ee>] lock_acquire+0x97/0x10c [<ffffffffa006494e>] ? cx23885_buf_queue+0x69/0x142 [cx23885] [<ffffffff8102e9bc>] ? amd_set_subcaches+0x19b/0x19b [<ffffffff816313b4>] _raw_spin_lock_irqsave+0x36/0x4a [<ffffffffa006494e>] ? cx23885_buf_queue+0x69/0x142 [cx23885] [<ffffffffa006494e>] cx23885_buf_queue+0x69/0x142 [cx23885] [<ffffffffa00662cb>] buffer_queue+0x17/0x19 [cx23885] [<ffffffffa00382d5>] __enqueue_in_driver+0x6a/0x6f [videobuf2_core] [<ffffffffa0038ead>] vb2_start_streaming+0x37/0x129 [videobuf2_core] [<ffffffffa003a6c0>] vb2_internal_streamon+0xc5/0x105 [videobuf2_core] [<ffffffffa003b889>] __vb2_init_fileio+0x224/0x286 [videobuf2_core] [<ffffffffa003bcc0>] ? vb2_thread_start+0x7b/0x15f [videobuf2_core] [<ffffffffa0050182>] ? vb2_dvb_start_feed+0x86/0x86 [videobuf2_dvb] [<ffffffffa003bd06>] vb2_thread_start+0xc1/0x15f [videobuf2_core] [<ffffffff8150d393>] ? dmx_section_feed_start_filtering+0x2f/0x14f [<ffffffffa0050157>] vb2_dvb_start_feed+0x5b/0x86 [videobuf2_dvb] [<ffffffff8150d461>] dmx_section_feed_start_filtering+0xfd/0x14f [<ffffffff8150afc7>] dvb_dmxdev_filter_start+0x23f/0x315 [<ffffffff8150b6ad>] dvb_demux_do_ioctl+0x1fb/0x556 [<ffffffff81509e94>] dvb_usercopy+0xb4/0x11c [<ffffffff8150b4b2>] ? dvb_dmxdev_ts_callback+0xd0/0xd0 [<ffffffff8150a11a>] dvb_demux_ioctl+0x10/0x14 [<ffffffff81144ac4>] do_vfs_ioctl+0x3c1/0x474 [<ffffffff8126f181>] ? file_has_perm+0x5b/0x7f [<ffffffff810bf6ca>] ? __audit_syscall_entry+0xbc/0xde [<ffffffff81144bcc>] SyS_ioctl+0x55/0x7a [<ffffffff81631d52>] system_call_fastpath+0x12/0x17 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08drm/rockchip: use for_each_endpoint_of_node macro, drop endpoint reference ↵Philipp Zabel
on break Using the for_each_... macro should make the code a bit shorter and easier to read. Also, when breaking out of the loop, the endpoint node reference count needs to be decremented. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-04-08drm/rcar-du: use for_each_endpoint_of_node macroPhilipp Zabel
Using the for_each_... macro should make the code a bit shorter and easier to read. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-04-08drm/imx: use for_each_endpoint_of_node macro in imx_drm_encoder_get_mux_idPhilipp Zabel
Using the for_each_... macro should make the code bit shorter and easier to read. This patch also properly decrements the endpoint node reference count before returning out of the loop. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-04-08drm: use for_each_endpoint_of_node macro in drm_of_find_possible_crtcsPhilipp Zabel
Using the for_each_... macro should make the code a bit shorter and easier to read. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-04-08kvm: mmu: lazy collapse small sptes into large sptesWanpeng Li
Dirty logging tracks sptes in 4k granularity, meaning that large sptes have to be split. If live migration is successful, the guest in the source machine will be destroyed and large sptes will be created in the destination. However, the guest continues to run in the source machine (for example if live migration fails), small sptes will remain around and cause bad performance. This patch introduce lazy collapsing of small sptes into large sptes. The rmap will be scanned in ioctl context when dirty logging is stopped, dropping those sptes which can be collapsed into a single large-page spte. Later page faults will create the large-page sptes. Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Message-Id: <1428046825-6905-1-git-send-email-wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: Clear CR2 on VCPU resetNadav Amit
CR2 is not cleared as it should after reset. See Intel SDM table named "IA-32 Processor States Following Power-up, Reset, or INIT". Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427933438-12782-5-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: DR0-DR3 are not clear on resetNadav Amit
DR0-DR3 are not cleared as they should during reset and when they are set from userspace. It appears to be caused by c77fb5fe6f03 ("KVM: x86: Allow the guest to run with dirty debug registers"). Force their reload on these situations. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427933438-12782-4-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: BSP in MSR_IA32_APICBASE is writableNadav Amit
After reset, the CPU can change the BSP, which will be used upon INIT. Reset should return the BSP which QEMU asked for, and therefore handled accordingly. To quote: "If the MP protocol has completed and a BSP is chosen, subsequent INITs (either to a specific processor or system wide) do not cause the MP protocol to be repeated." [Intel SDM 8.4.2: MP Initialization Protocol Requirements and Restrictions] Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427933438-12782-3-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: simplify kvm_apic_mapRadim Krčmář
recalculate_apic_map() uses two passes over all VCPUs. This is a relic from time when we selected a global mode in the first pass and set up the optimized table in the second pass (to have a consistent mode). Recent changes made mixed mode unoptimized and we can do it in one pass. Format of logical MDA is a function of the mode, so we encode it in apic_logical_id() and drop obsoleted variables from the struct. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1423766494-26150-5-git-send-email-rkrcmar@redhat.com> [Add lid_bits temporary in apic_logical_id. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: avoid logical_map when it is invalidRadim Krčmář
We want to support mixed modes and the easiest solution is to avoid optimizing those weird and unlikely scenarios. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1423766494-26150-4-git-send-email-rkrcmar@redhat.com> [Add comment above KVM_APIC_MODE_* defines. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: fix mixed APIC mode broadcastRadim Krčmář
Broadcast allowed only one global APIC mode, but mixed modes are theoretically possible. x2APIC IPI doesn't mean 0xff as broadcast, the rest does. x2APIC broadcasts are accepted by xAPIC. If we take SDM to be logical, even addreses beginning with 0xff should be accepted, but real hardware disagrees. This patch aims for simple code by considering most of real behavior as undefined. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1423766494-26150-3-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: use MDA for interrupt matchingRadim Krčmář
In mixed modes, we musn't deliver xAPIC IPIs like x2APIC and vice versa. Instead of preserving the information in apic_send_ipi(), we regain it by converting all destinations into correct MDA in the slow path. This allows easier reasoning about subsequent matching. Our kvm_apic_broadcast() had an interesting design decision: it didn't consider IOxAPIC 0xff as broadcast in x2APIC mode ... everything worked because IOxAPIC can't set that in physical mode and logical mode considered it as a message for first 8 VCPUs. This patch interprets IOxAPIC 0xff as x2APIC broadcast. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1423766494-26150-2-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08kvm/ppc/mpic: drop unused IRQ_testbitArseny Solokha
Drop unused static procedure which doesn't have callers within its translation unit. It had been already removed independently in QEMU[1] from the OpenPIC implementation borrowed from the kernel. [1] https://lists.gnu.org/archive/html/qemu-devel/2014-06/msg01812.html Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Cc: Alexander Graf <agraf@suse.de> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424768706-23150-3-git-send-email-asolokha@kb.kras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: nVMX: remove unnecessary double caching of MAXPHYADDREugene Korenevsky
After speed-up of cpuid_maxphyaddr() it can be called frequently: instead of heavyweight enumeration of CPUID entries it returns a cached pre-computed value. It is also inlined now. So caching its result became unnecessary and can be removed. Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com> Message-Id: <20150329205644.GA1258@gnote> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: nVMX: checks for address bits beyond MAXPHYADDR on VM-entryEugene Korenevsky
On each VM-entry CPU should check the following VMCS fields for zero bits beyond physical address width: - APIC-access address - virtual-APIC address - posted-interrupt descriptor address This patch adds these checks required by Intel SDM. Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com> Message-Id: <20150329205627.GA1244@gnote> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpuEugene Korenevsky
cpuid_maxphyaddr(), which performs lot of memory accesses is called extensively across KVM, especially in nVMX code. This patch adds a cached value of maxphyaddr to vcpu.arch to reduce the pressure onto CPU cache and simplify the code of cpuid_maxphyaddr() callers. The cached value is initialized in kvm_arch_vcpu_init() and reloaded every time CPUID is updated by usermode. It is obvious that these reloads occur infrequently. Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com> Message-Id: <20150329205612.GA1223@gnote> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: vmx: pass error code with internal error #2Radim Krčmář
Exposing the on-stack error code with internal error is cheap and potentially useful. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1428001865-32280-1-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08x86: vdso: fix pvclock races with task migrationRadim Krčmář
If we were migrated right after __getcpu, but before reading the migration_count, we wouldn't notice that we read TSC of a different VCPU, nor that KVM's bug made pvti invalid, as only migration_count on source VCPU is increased. Change vdso instead of updating migration_count on destination. Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Fixes: 0a4e6be9ca17 ("x86: kvm: Revert "remove sched notifier for cross-cpu migrations"") Message-Id: <1428000263-11892-1-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: remove kvm_read_hva and kvm_read_hva_atomicPaolo Bonzini
The corresponding write functions just use __copy_to_user. Do the same on the read side. This reverts what's left of commit 86ab8cffb498 (KVM: introduce gfn_to_hva_read/kvm_read_hva/kvm_read_hva_atomic, 2012-08-21) Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1427976500-28533-1-git-send-email-pbonzini@redhat.com>
2015-04-08KVM: x86: optimize delivery of TSC deadline timer interruptPaolo Bonzini
The newly-added tracepoint shows the following results on the tscdeadline_latency test: qemu-kvm-8387 [002] 6425.558974: kvm_vcpu_wakeup: poll time 10407 ns qemu-kvm-8387 [002] 6425.558984: kvm_vcpu_wakeup: poll time 0 ns qemu-kvm-8387 [002] 6425.561242: kvm_vcpu_wakeup: poll time 10477 ns qemu-kvm-8387 [002] 6425.561251: kvm_vcpu_wakeup: poll time 0 ns and so on. This is because we need to go through kvm_vcpu_block again after the timer IRQ is injected. Avoid it by polling once before entering kvm_vcpu_block. On my machine (Xeon E5 Sandy Bridge) this removes about 500 cycles (7%) from the latency of the TSC deadline timer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: extract blocking logic from __vcpu_runPaolo Bonzini
Rename the old __vcpu_run to vcpu_run, and extract part of it to a new function vcpu_block. The next patch will add a new condition in vcpu_block, avoid extra indentation. Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08kvm: x86: fix x86 eflags fixed bitWanpeng Li
Guest can't be booted w/ ept=0, there is a message dumped as below: If you're running a guest on an Intel machine without unrestricted mode support, the failure can be most likely due to the guest entering an invalid state for Intel VT. For example, the guest maybe running in big real mode which is not supported on less recent Intel processors. EAX=00000011 EBX=f000d2f6 ECX=00006cac EDX=000f8956 ESI=bffbdf62 EDI=00000000 EBP=00006c68 ESP=00006c68 EIP=0000d187 EFL=00000004 [-----P-] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =e000 000e0000 ffffffff 00809300 DPL=0 DS16 [-WA] CS =f000 000f0000 ffffffff 00809b00 DPL=0 CS16 [-RA] SS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] DS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] FS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] GS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f6a80 00000037 IDT= 000f6abe 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=01 1e b8 6a 2e 0f 01 16 74 6a 0f 20 c0 66 83 c8 01 0f 22 c0 <66> ea 8f d1 0f 00 08 00 b8 10 00 00 00 8e d8 8e c0 8e d0 8e e0 8e e8 89 c8 ff e2 89 c1 b8X X86 eflags bit 1 is fixed set, which means that 1 << 1 is set instead of 1, this patch fix it. Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Message-Id: <1428473294-6633-1-git-send-email-wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08gpio: arrange Kconfig symbols alphabeticallyLinus Walleij
This rearranges the GPIO drivers Kconfig symbols alphabetically as the top comment in the file already states they should be. No functional changes whatsoever. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: ich: Implement get_direction functionAaron Sierra
Allow the kernel to query the driver for a GPIO's pin direction. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: use (!foo) instead of (foo == NULL)Varka Bhadram
Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: arizona: drop owner assignment from platform_driversVarka Bhadram
This driver no need to set the owner field, it will be populated by driver core. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: max7300: remove 'ret' variableVarka Bhadram
Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: use devm_kzallocVarka Bhadram
We can use devres API for allocating memory. No need of using kfree. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: sch: use uapi/linux/pci_ids.h directlyMichael S. Tsirkin
Header moved from linux/pci_ids.h to uapi/linux/pci_ids.h, use the new header directly so we can drop the wrapper in include/linux/pci_ids.h. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: x-gene: fix devm_ioremap_resource() checkVladimir Zapolskiy
devm_ioremap_resource() returns IOMEM_ERR_PTR() and it never returns NULL, fix the check to prevent access to invalid virtual address. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: loongson: Add Loongson-3A/3B GPIO driver supportHuacai Chen
Improve Loongson-2's GPIO driver to support Loongson-3A/3B, and update Loongson-3's default config file. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08cfg80211: don't allow disabling WEXT if it's requiredJohannes Berg
The change to only export WEXT symbols when required could break the build if CONFIG_CFG80211_WEXT was explicitly disabled while a driver like orinoco selected it. Fix this by hiding the symbol when it's required so it can't be disabled in that case. Fixes: 2afe38d15cee ("cfg80211-wext: export symbols only when needed") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-08x86/asm/entry/64: Add forgotten CFI annotationDenys Vlasenko
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428424967-14460-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-08x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layoutDenys Vlasenko
Interrupt entry points are handled with the following code, each 32-byte code block contains seven entry points: ... [push][jump 22] // 4 bytes [push][jump 18] // 4 bytes [push][jump 14] // 4 bytes [push][jump 10] // 4 bytes [push][jump 6] // 4 bytes [push][jump 2] // 4 bytes [push][jump common_interrupt][padding] // 8 bytes [push][jump] [push][jump] [push][jump] [push][jump] [push][jump] [push][jump] [push][jump common_interrupt][padding] [padding_2] common_interrupt: And there is a table which holds pointers to every entry point, IOW: to every push. In cold cache, two jumps are still costlier than one, even though we get the benefit of them residing in the same cacheline. This change replaces short jumps with near ones to 'common_interrupt', and pads every push+jump pair to 8 bytes. This way, each interrupt takes only one jump. This change replaces ".p2align CONFIG_X86_L1_CACHE_SHIFT" before dispatch table with ".align 8" - we do not need anything stronger than that. The table of entry addresses (the interrupt[] array) is no longer necessary, the address of entries can be easily calculated as (irq_entries_start + i*8). text data bss dec hex filename 12546 0 0 12546 3102 entry_64.o.before 11626 0 0 11626 2d6a entry_64.o The size decrease is because 1656 bytes of .init.rodata are gone. That's initdata, though. The resident size does go up a bit. Run-tested (32 and 64 bits). Acked-and-Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428090553-7283-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-08x86/asm/entry/64: Move opportunistic sysret code to syscall code pathDenys Vlasenko
This change does two things: Copy-pastes "retint_swapgs:" code into syscall handling code, the copy is under "syscall_return:" label. The code is unchanged apart from some label renames. Removes "opportunistic sysret" code from "retint_swapgs:" code block, since now it won't be reached by syscall return. This in fact removes most of the code in question. text data bss dec hex filename 12530 0 0 12530 30f2 entry_64.o.before 12562 0 0 12562 3112 entry_64.o Run-tested. Acked-and-Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427993219-7291-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-08Merge tag 'v4.0-rc7' into x86/asm, to resolve conflictsIngo Molnar
Conflicts: arch/x86/kernel/entry_64.S Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-08usb: chipidea: debug: add low power mode check before print registersLi Jun
Since the required clock to access registers is gated off in low power mode, add ci->in_lpm check before try to dump registers value. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-04-07target: simplify target_xcopy_init_pt_lunChristoph Hellwig
Drop unused argument & return value and consolidate a duplicate assignment. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-07target: remove the unused SCF_CMD_XCOPY_PASSTHROUGH flagChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-07target/rd: reduce code duplication in rd_execute_rw()Akinobu Mita
Factor out code duplication in rd_execute_rw() into a helper function rd_do_prot_rw(). This change is required to minimize the forthcoming fix in rd_do_prot_rw(). (Fix up v4.1 for-next fuzz - nab) Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: target-devel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-07tcm_loop: fixup tpgt string to integer conversionMing Lin
Currently, for example, mkdir "tpgt_xyz" doesn't return error. mkdir /sys/kernel/config/target/loopback/naa.60014055f195952b/tpgt_xyz Replace obsoleted simple_strtoul with kstrtoul and check the conversion. Signed-off-by: Ming Lin <mlin@kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-07iser-target: Bump version to 1.0Sagi Grimberg
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-07iser-target: Remove conn_ prefix from struct isert_conn membersSagi Grimberg
These variables are always accessed via struct isert_conn so no need to have a "conn_" prefix for them. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-07iser-target: Remove un-needed rdma_listen backlogSagi Grimberg
iser target can handle as many connect request as the fabric sends to it. This backlog should not set as a back-pressure mechanism (which is not very useful). isert does need a back-pressure mechanism, but it should be added in isert by monitoring the number of pending established connections (will be added in a later stage). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-07iser-target: Remove redundant check on the deviceSagi Grimberg
In iser_connect_release there is no chance that the iser device is set to NULL, if this happens we have a BUG. So use BUG_ON. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-07iser-target: Get rid of redundant max_acceptSagi Grimberg
Not sure what it was used for, but there is no real need for it now as I see it. Go ahead and get rid of it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit (git 2.34.1) at 2025-09-24 04:29:05 +0000