summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-15cpupower: fix breakage from libpci API changeLucas Stach
libpci 3.3.0 introduced an additional member in the pci_filter struct which needs to be initialized to -1 to get the same behavior as before the API change. The libpci internal helpers got updated accordingly, but as the cpupower pci helpers initialized the struct themselves the behavior changed. Use the libpci helper pci_filter_init() to fix this and guard against similar breakages in the future. This fixes probing of the AMD fam12h/14h cpuidle monitor on systems with libpci >= 3.3.0. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-15IB/mlx4: Change alias guids default to be host assignedYishai Hadas
Change the default mode to be HOST assigned instead of SM assigned. This is the expected operational mode, because it doesn't depend on SM availability. As PF generates random GUIDs as the initial admin values, this gives out of the box experience. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15net/mlx4_core: Return the admin alias GUID upon host view requestYishai Hadas
Return the admin alias GUID value upon a GET request via HOST. We do this so that the GUID value requested by the admin is returned even if the SM has not yet approved this GUID (e.g. the SM is down). Note that this does not create a problem, since the virtual port will remain down until the SM does ACK the requested GUID value. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15net/mlx4_core: Raise slave shutdown event upon FLRYishai Hadas
There might be cases that PF doesn't get a "reset" command upon slave down (e.g. virsh destroy). In these cases, however, an FLR event is issued. Therefore, when the PF receives an FLR event for a slave, it should also generate a shutdown event on the PF for that slave, to let the PF upper layers (mlx4_ib, eth) perform any required cleanup/actions associated with slave shutdown. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Request alias GUID on demandYishai Hadas
Request GIDs from the SM on demand, i.e., when a VF actually needs them, and release them when the GIDs are no longer in use. In cloud environments, this is useful for GID migrations, in which a GID is assigned to a VF on the destination HCA, while the VF on the source HCA is shutdown (but the GID was not administratively released). Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Change init flow to request alias GUIDs for active VFsYishai Hadas
Change the init flow to ask GUIDs only for active VFs. This is done for both SM & HOST modes so that there is no need any more to maintain the ownership record type. In case SM mode is used, the initial value will be 0, ask the SM to assign, for the HOST mode the initial value will be the HOST generated GUID. This will enable out of the box experience for both probed and attached VFs. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Manage admin alias GUID upon admin requestYishai Hadas
Set the admin alias GUID per the administrator's request via the sysfs mechanism into the core layer. The "get" request returns the current value. However, if the administrator requests the SM to assign a new value by requesting 0, the SM assigned GUID is returned. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15net/mlx4_core: Set initial admin GUIDs for VFsYishai Hadas
To have out of the box experience, the PF generates random GUIDs who serve as the initial admin values. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15net/mlx4_core: Manage alias GUID per VFYishai Hadas
Manages alias GUIDs per VF per port in the core layer. This is a pre-step for managing alias GUIDs in a mode that the admin GUID is returned via ib_query_gid() regardless of whether the SM has approved it or not. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Alias GUID adding persistency supportYishai Hadas
If the SM rejects an alias GUID request the PF driver keeps trying to acquire the specified GUID indefinitely, utilizing an exponential backoff scheme. Retrying is managed per GUID entry. Each entry that wasn't applied holds its next retry information. Retry requests to the SM consist of records of 8 consecutive GUIDS. Each record that contains GUIDs requiring retries holds its next time-to-run based on the retry information of all its GUID entries. The record having the lowest retry time will run first when that retry time arrives. Since the method (SET or DELETE) as sent to the SM applies to all the GUIDs in the record, we must handle SET requests and DELETE requests in separate SM messages (one for SETs and the other for DELETEs). To avoid race conditions where a GUID entry request (set or delete) was modified after the SM request was sent, we save the method and the requested indices as part of the callback's context -- thus, only the requested indexes are evaluated when the response is received. When an GUID entry is approved we turn off its retry-required bit, this prevents redundant SM retries from occurring on that record. The port down event should be sent only when previously it was up. Likewise, the port up event should be sent only if previously the port was down. Synchronization was added around the flows that change entries and record state to prevent race conditions. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15Merge branch 'omap/dt' into next/lateArnd Bergmann
As pointed out by Stephen Rothwell, commit e52117638b79 ("ARM: dts: omap3: Add DT entries for OMAP 3 ISP") conflicts with b8845074cfbb ("ARM: dts: omap3: add minimal l4 bus layout with control module support") in non-obvious ways, causing a build failure when both patches are present. This merges the two branches that introduce the respective changes into the next/late branch to resolve the way that Stephen suggested, as confirmed by Tony. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.org/lkml/2015/4/6/436 Acked-by: Tony Lindgren <tony@atomide.com>
2015-04-15VFS: assorted d_backing_inode() annotationsDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: fs/inode.c helpers: d_inode() annotationsDavid Howells
these should be used on objects already in top layer Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: fs/cachefiles: d_backing_inode() annotationsDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: fs library helpers: d_inode() annotationsDavid Howells
library helpers called by filesystem drivers on their own inodes Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: assorted weird filesystems: d_inode() annotationsDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: security/: d_inode() annotationsDavid Howells
... except where that code acts as a filesystem driver, rather than working with dentries given to it. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: security/: d_backing_inode() annotationsDavid Howells
most of the ->d_inode uses there refer to the same inode IO would go to, i.e. d_backing_inode() Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: net/: d_inode() annotationsDavid Howells
socket inodes and sunrpc filesystems - inodes owned by that code Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: net/unix: d_backing_inode() annotationsDavid Howells
places where we are dealing with S_ISSOCK file creation/lookups. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: kernel/: d_inode() annotationsDavid Howells
relayfs and tracefs are dealing with inodes of their own; those two act as filesystem drivers Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: audit: d_backing_inode() annotationsDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: Fix up some ->d_inode accesses in the chelsio driverDavid Howells
Fix up some ->d_inode accesses in the chelsio driver. (1) FILE_DATA() should just be replaced with file_inode(). (2) set_debugfs_file_size() should be removed and debugfs_create_file_size() should be used to create the file. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: Cachefiles should perform fs modifications on the top layer onlyDavid Howells
Cachefiles should perform fs modifications (eg. vfs_unlink()) on the top layer only and should not attempt to alter the lower layer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: AF_UNIX sockets should call mknod on the top layer onlyDavid Howells
AF_UNIX sockets should call mknod on the top layer only and should not attempt to modify the lower layer in a layered filesystem such as overlayfs. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15block: loop: switch to VFS ITER_BVECChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15configfs: Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inodeDavid Howells
Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inode. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: Make pathwalk use d_is_reg() rather than S_ISREG()David Howells
Make pathwalk use d_is_reg() rather than S_ISREG() to determine whether to honour O_TRUNC. Since this occurs after complete_walk(), the dentry type field cannot change and the inode pointer cannot change as we hold a ref on the dentry, so this should be safe. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR()David Howells
Fix up debugfs to use d_is_dir(dentry) in place of S_ISDIR(dentry->d_inode->i_mode). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: Combine inode checks with d_is_negative() and d_is_positive() in pathwalkDavid Howells
Where we have: if (!dentry->d_inode || d_is_negative(dentry)) { type constructions in pathwalk we should be able to eliminate the check of d_inode and rely solely on the result of d_is_negative() or d_is_positive(). What we do have to take care to do is to read d_inode after calling a d_is_xxx() typecheck function to get the barriering right. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15NFS: Don't use d_inode as a variable nameDavid Howells
Don't use d_inode as a variable name as it now masks a function name. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: Impose ordering on accesses of d_inode and d_flagsDavid Howells
Impose ordering on accesses of d_inode and d_flags to avoid the need to do this: if (!dentry->d_inode || d_is_negative(dentry)) { when this: if (d_is_negative(dentry)) { should suffice. This check is especially problematic if a dentry can have its type field set to something other than DENTRY_MISS_TYPE when d_inode is NULL (as in unionmount). What we really need to do is stick a write barrier between setting d_inode and setting d_flags and a read barrier between reading d_flags and reading d_inode. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: Add owner-filesystem positive/negative dentry checksDavid Howells
Supply two functions to test whether a filesystem's own dentries are positive or negative (d_really_is_positive() and d_really_is_negative()). The problem is that the DCACHE_ENTRY_TYPE field of dentry->d_flags may be overridden by the union part of a layered filesystem and isn't thus necessarily indicative of the type of dentry. Normally, this would involve a negative dentry (ie. ->d_inode == NULL) having ->d_layer.lower pointed to a lower layer dentry, DCACHE_PINNING_LOWER set and the DCACHE_ENTRY_TYPE field set to something other than DCACHE_MISS_TYPE - but it could also involve, say, a DCACHE_SPECIAL_TYPE being overridden to DCACHE_WHITEOUT_TYPE if a 0,0 chardev is detected in the top layer. However, inside a filesystem, when that fs is looking at its own dentries, it probably wants to know if they are really negative or not - and doesn't care about the fallthrough bits used by the union. To this end, a filesystem should normally use d_really_is_positive/negative() when looking at its own dentries rather than d_is_positive/negative() and should use d_inode() to get at the inode. Anyone looking at someone else's dentries (this includes pathwalk) should use d_is_xxx() and d_backing_inode(). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15nfs: generic_write_checks() shouldn't be done on swapout...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15i2c: core: Export bus recovery functionsMark Brown
Current -next fails to link an ARM allmodconfig because drivers that use the core recovery functions can be built as modules but those functions are not exported: ERROR: "i2c_generic_gpio_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined! ERROR: "i2c_generic_scl_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined! ERROR: "i2c_recover_bus" [drivers/i2c/busses/i2c-davinci.ko] undefined! Add exports to fix this. Fixes: 5f9296ba21b3c (i2c: Add bus recovery infrastructure) Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-04-15Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Here is the kconfig stuff for v4.1-rc1: - fixes for mergeconfig (used by make kvmconfig/tinyconfig) - header cleanup - make -s *config is silent now" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: Do not print status messages in make -s mode kconfig: Simplify Makefile kbuild: add generic mergeconfig target, %.config merge_config.sh: rename MAKE to RUNMAKE merge_config.sh: improve indentation kbuild: mergeconfig: remove redundant $(objtree) kbuild: mergeconfig: move an error check to merge_config.sh kbuild: mergeconfig: fix "jobserver unavailable" warning kconfig: Remove unnecessary prototypes from headers kconfig: Remove dead code kconfig: Get rid of the P() macro in headers kconfig: fix a misspelling in scripts/kconfig/merge_config.sh
2015-04-15Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: "Here is the first round of kbuild changes for v4.1-rc1: - kallsyms fix for ARM and cleanup - make dep(end) removed (developers have no sense of nostalgia these days...) - include Makefiles by relative path - stop useless rebuilds of asm-offsets.h and bounds.h" * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Kbuild: kallsyms: drop special handling of pre-3.0 GCC symbols Kbuild: kallsyms: ignore veneers emitted by the ARM linker kbuild: ia64: use $(src)/Makefile.gate rather than particular path kbuild: include $(src)/Makefile rather than $(obj)/Makefile kbuild: use relative path more to include Makefile kbuild: use relative path to include Makefile kbuild: do not add $(bounds-file) and $(offsets-file) to targets kbuild: remove warning about "make depend" kbuild: Don't reset timestamps in include/generated if not needed
2015-04-15Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Highlights for this window: - improved AVC hashing for SELinux by John Brooks and Stephen Smalley - addition of an unconfined label to Smack - Smack documentation update - TPM driver updates" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits) lsm: copy comm before calling audit_log to avoid race in string printing tomoyo: Do not generate empty policy files tomoyo: Use if_changed when generating builtin-policy.h tomoyo: Use bin2c to generate builtin-policy.h selinux: increase avtab max buckets selinux: Use a better hash function for avtab selinux: convert avtab hash table to flex_array selinux: reconcile security_netlbl_secattr_to_sid() and mls_import_netlbl_cat() selinux: remove unnecessary pointer reassignment Smack: Updates for Smack documentation tpm/st33zp24/spi: Add missing device table for spi phy. tpm/st33zp24: Add proper wait for ordinal duration in case of irq mode smack: Fix gcc warning from unused smack_syslog_lock mutex in smackfs.c Smack: Allow an unconfined label in bringup mode Smack: getting the Smack security context of keys Smack: Assign smack_known_web as default smk_in label for kernel thread's socket tpm/tpm_infineon: Use struct dev_pm_ops for power management MAINTAINERS: Add Jason as designated reviewer for TPM tpm: Update KConfig text to include TPM2.0 FIFO chips tpm/st33zp24/dts/st33zp24-spi: Add dts documentation for st33zp24 spi phy ...
2015-04-15Input: alps - document separate pointstick button bits for V2 devicesHans de Goede
Non interleaved dualpoint v2 devices have separate pointstick button bits, document this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-15Input: atmel_mxt_ts - add support for Google Pixel 2Dmitry Torokhov
This change allows atmel_mxt_ts to bind to ACPI-enumerated devices in Google Pixel 2 (2015). While newer version of ACPI standard allow use of device-tree-like properties in device descriptions, the version of ACPI implemented in Google BIOS does not support them, and we have to resort to DMI data to specify exact characteristics of the devices (touchpad vs. touchscreen, GPIO to button mapping, etc). Pixel 1 continues to use i2c devices and platform data created by chromeos-laptop driver, since ACPI does not enumerate them. Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: "Here is the crypto update for 4.1: New interfaces: - user-space interface for AEAD - user-space interface for RNG (i.e., pseudo RNG) New hashes: - ARMv8 SHA1/256 - ARMv8 AES - ARMv8 GHASH - ARM assembler and NEON SHA256 - MIPS OCTEON SHA1/256/512 - MIPS img-hash SHA1/256 and MD5 - Power 8 VMX AES/CBC/CTR/GHASH - PPC assembler AES, SHA1/256 and MD5 - Broadcom IPROC RNG driver Cleanups/fixes: - prevent internal helper algos from being exposed to user-space - merge common code from assembly/C SHA implementations - misc fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (169 commits) crypto: arm - workaround for building with old binutils crypto: arm/sha256 - avoid sha256 code on ARMv7-M crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer crypto: x86/sha256_ssse3 - move SHA-224/256 SSSE3 implementation to base layer crypto: x86/sha1_ssse3 - move SHA-1 SSSE3 implementation to base layer crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer crypto: arm/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer crypto: arm/sha1-ce - move SHA-1 ARMv8 implementation to base layer crypto: arm/sha1_neon - move SHA-1 NEON implementation to base layer crypto: arm/sha1 - move SHA-1 ARM asm implementation to base layer crypto: sha512-generic - move to generic glue implementation crypto: sha256-generic - move to generic glue implementation crypto: sha1-generic - move to generic glue implementation crypto: sha512 - implement base layer for SHA-512 crypto: sha256 - implement base layer for SHA-256 crypto: sha1 - implement base layer for SHA-1 crypto: api - remove instance when test failed crypto: api - Move alg ref count init to crypto_check_alg ...
2015-04-15blk-mq: reduce unnecessary software queue loopingChong Yuan
In flush_busy_ctxs() and blk_mq_hctx_has_pending(), regardless of how many ctxs assigned to one hctx, they will all loop hctx->ctx_map.map_size times. Here hctx->ctx_map.map_size is a const ALIGN(nr_cpu_ids, 8) / 8. Especially, flush_busy_ctxs() is in hot code path. And it's unnecessary. Change ->map_size to contain the actually mapped software queues, so we only loop for as many iterations as we have to. And remove cpumask setting and nr_ctx count in blk_mq_init_cpu_queues() since they are all re-done in blk_mq_map_swqueue(). blk_mq_map_swqueue(). Signed-off-by: Chong Yuan <chong.yuan@memblaze.com> Reviewed-by: Wenbo Wang <wenbo.wang@memblaze.com> Updated by me for formatting and commenting. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-15aio: fix serial draining in exit_aio()Jens Axboe
exit_aio() currently serializes killing io contexts. Each context killing ends up having to do percpu_ref_kill(), which in turns has to wait for an RCU grace period. This can take a long time, depending on the number of contexts. And there's no point in doing them serially, when we could be waiting for all of them in one fell swoop. This patches makes my fio thread offload test case exit 0.2s instead of almost 6s. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-15dm crypt: fix deadlock when async crypto algorithm returns -EBUSYBen Collins
I suspect this doesn't show up for most anyone because software algorithms typically don't have a sense of being too busy. However, when working with the Freescale CAAM driver it will return -EBUSY on occasion under heavy -- which resulted in dm-crypt deadlock. After checking the logic in some other drivers, the scheme for crypt_convert() and it's callback, kcryptd_async_done(), were not correctly laid out to properly handle -EBUSY or -EINPROGRESS. Fix this by using the completion for both -EBUSY and -EINPROGRESS. Now crypt_convert()'s use of completion is comparable to af_alg_wait_for_completion(). Similarly, kcryptd_async_done() follows the pattern used in af_alg_complete(). Before this fix dm-crypt would lockup within 1-2 minutes running with the CAAM driver. Fix was regression tested against software algorithms on PPC32 and x86_64, and things seem perfectly happy there as well. Signed-off-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-04-15dm crypt: leverage immutable biovecs when decrypting on readMike Snitzer
Commit 003b5c571 ("block: Convert drivers to immutable biovecs") stopped short of changing dm-crypt to leverage the fact that the biovec array of a bio will no longer be modified. Switch to using bio_clone_fast() when cloning bios for decryption after read. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15dm crypt: update URLs to new cryptsetup project pageMilan Broz
Cryptsetup home page moved to GitLab. Also remove link to abandonded Truecrypt page. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15dm: add log writes targetJosef Bacik
Introduce a new target that is meant for file system developers to test file system integrity at particular points in the life of a file system. We capture all write requests and associated data and log them to a separate device for later replay. There is a userspace utility to do this replay. The idea behind this is to give file system developers a tool to verify that the file system is always consistent. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Zach Brown <zab@zabbo.net> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15dm table: use bool function return values of true/false not 1/0Joe Perches
Use the normal return values for bool functions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15dm verity: add error handling modes for corrupted blocksSami Tolvanen
Add device specific modes to dm-verity to specify how corrupted blocks should be handled. The following modes are defined: - DM_VERITY_MODE_EIO is the default behavior, where reading a corrupted block results in -EIO. - DM_VERITY_MODE_LOGGING only logs corrupted blocks, but does not block the read. - DM_VERITY_MODE_RESTART calls kernel_restart when a corrupted block is discovered. In addition, each mode sends a uevent to notify userspace of corruption and to allow further recovery actions. The driver defaults to previous behavior (DM_VERITY_MODE_EIO) and other modes can be enabled with an additional parameter to the verity table. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 21:15:10 +0000