| Age | Commit message (Collapse) | Author |
|---|
|
hl_eq_heartbeat_event_handle() doesn't have ASIC specific code, and
therefore can be moved from Gaudi2-only code to common code, and
possibly used for other ASICs.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
Future supported ASICs might use the dynamic EQ mechanism with the
firmware, and in that case the EQ size won't be equal to the default
HL_EQ_SIZE_IN_BYTES value.
Add an ASIC property to enable overriding this value.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
In struct cpucp_packet both nonce and data_max_size members are in an
union overlapping each other. This is a problem as they both are used
in attestation and info_signed packets.
The solution here is to move the nonce member to a different union under
the same structure.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
FW initiates a hard reset upon an MC SEI severe error.
Align the driver to expect this reset and avoid accessing the device
until the reset is done.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
gaudi2_hbm_sei_handle_read_err()
The return value in gaudi2_hbm_sei_handle_read_err() is boolean and not
a bitmask, so there is need for "|= true".
In addition, rename the 'rc' variable, as no "return code" is returned
here but an indication if a hard reset is required.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
when reporting tpc events, the dcore and tpc in dcore should
be reported and propagated, and not the generatl tpc number
Signed-off-by: Ariel Suller <asuller@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
Driver should check and report any fatal errors detected by preboot,
before it attempts to load the boot fit.
Some errors may cause the driver to stop the boot process and mark
the device as unusable.
This check will allow the driver to fail and print the error reported
by preboot and skip the time wasting attempt of trying to load the
boot fit, which will fail due to the error.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
Struct comms_desc_header is deprecated and replaced by struct
comms_msg_header. As a preparation for removing comms_desc_header
from FW, all it's usage in code is replaced by comms_msg_header.
Signed-off-by: Igal Zeltser <izeltser@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
It is hard to debug the reason for heartbeat check failures.
As an attempt to ease this task, this patch will provide more
information when this failure happens.
Heartbeat checks the communication with FW, so printing
the CPU queue pi/ci and the counter of how many times that event
was received would help in debugging the issue.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
This addition helps log parsers better define the error without the need
to go back and search the device name on former log lines.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
Exposing server type through debugfs to enable easier access via
scripts.
Signed-off-by: Tal Risin <trisin@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
Trace events might still be recorded after the accel device is released,
while the device name is no longer available.
Modify the trace functions to use the parent device instead, which is
available at that point and still informative as the device name.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
If we detected heartbet event while some daemon in the background send
(via driver interface) CPUCP messages the dmesg will be flooded.
Instead, a slight refactor in hl_fw_send_cpu_message() returns -EAGAIN
when CPU is disabled (i.e. heartbeat failure) and only then.
Later, all calling functions that may be invoked by user space can issue
prints only if the error code is not -EAGAIN.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
Align embedded headers to latest release.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
The function returned an error code which isn't propagated up the stack
(nor is it printed).
The return value is only checked for =0 or !=0 which implies bool return
value.
The function signature is updated accordingly, renamed, and slightly
refactored.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
Align the interrupts related headers to latest release.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
The extra info will help in better traceability and debug.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
Currently, the code contains 2 types of FW version comparison functions:
- hl_is_fw_sw_ver_[below/equal_or_greater]()
- gaudi2 specific function of the type
gaudi2_is_fw_ver_[below/above]x_y_z()
Moreover, some functions use the inner FW version which shuold be only
stage during development but not version dependencies.
Finally, some tests are done to deprecated FW version to which LKD
should hold no compatibility.
This commit aligns all APIs to a single function that just compares the
version and return an integers indicator (similar in some way to
strcmp()).
In addition, this generic function now considers also the sub-minor FW
version and also remove dead code resulting in deprecated FW versions
compatibility.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
|
|
The debug code relies on btree_trans_list being ordered so that it can
resume on subsequent calls or lock restarts.
However, it was using trans->locknig_wait.task.pid, which is incorrect
since btree_trans objects are cached and reused - typically by different
tasks.
Fix this by switching to pointer order, and also sort them lazily when
required - speeding up the btree_trans_get() fastpath.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
debug.c was using closure_get() on a different thread's closure where
the we don't know if the object being refcounted is alive.
We keep btree_trans objects on a list so they can be printed by debug
code, and because it is cost prohibitive to touch the btree_trans list
every time we allocate and free btree_trans objects, cached objects are
also on this list.
However, we do not want the debug code to see cached but not in use
btree_trans objects - critically because the btree_paths array will have
been freed (if it was reallocated).
closure_get() is also incorrect to use when that get may race with it
hitting zero, i.e. we must already have a ref on the object or know the
ref can't currently hit 0 for other reasons (as used in the cycle
detector).
to fix this, use the previously introduced closure_get_not_zero(),
closure_return_sync(), and closure_init_stack_release(); the debug code
now can only take a ref on a trans object if it's alive and in use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Provide new primitives for solving a lifetime issue with bcachefs
btree_trans objects.
closure_sync_return(): like closure_sync(), wait synchronously for any
outstanding gets. like closure_return, the closure is considered
"finished" and the ref left at 0.
closure_get_not_zero(): get a ref on a closure if it's alive, i.e. the
ref is not zero.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_deadlock_to_text() searches the list of btree transactions to find
a deadlock - when it finds one it's done; it's not like other *_read()
functions that's printing each object.
Factor out btree_deadlock_to_text() to make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were grabbing the sequence number before unlock incremented it - fix
this by moving the increment to seqmutex_lock() (so the seqmutex_relock()
failure path skips the mutex_trylock()), and returning the sequence
number from unlock(), to make the API simpler and safer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This pull request fixes the paths of the dt-schema to their
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.
Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.
|
|
Pull rust fix from Miguel Ojeda:
- Avoid unused import warning in 'rusttest'.
* tag 'rust-fixes-6.10' of https://github.com/Rust-for-Linux/linux:
rust: avoid unused import warning in `rusttest`
|
|
This fixes incorrect/missign checking of strndup_user() returns.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes for incorrect device descriptions, plus a
fix for a missing symbol export which causes build failures for some
newly added drivers in other trees"
* tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
regulator: bd71815: fix ramp values
regulator: core: Fix modpost error "regulator_get_regmap" undefined
regulator: tps6594-regulator: Fix the number of irqs for TPS65224 and TPS6594
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A number of fixes that have built up for SPI, a bunch of driver
specific ones including an unfortunate revert of an optimisation for
the i.MX driver which was causing issues with some configurations,
plus a couple of core fixes for the rarely used octal mode and for a
bad interaction between multi-CS support and target mode"
* tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
spi: Fix SPI slave probe failure
spi: Fix OCTAL mode support
spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
spi: cs42l43: Correct SPI root clock speed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix crashes triggered by administrative operations on the server
* tag 'nfsd-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: grab nfsd_mutex in nfsd_nl_rpc_status_get_dumpit()
nfsd: fix oops when reading pool_stats before server is started
|
|
Pull xfs fix from Chandan Babu:
- Fix assertion failure due to a race between unlink and cluster buffer
instantiation.
* tag 'xfs-6.10-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix unlink vs cluster buffer instantiation race
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of (mostly boring) fixes for syzbot bugs and rare(r) CI bugs.
The LRU_TIME_BITS fix was slightly more involved; we only have 48 bits
for the LRU position (we would prefer 64), so wraparound is possible
for the cached data LRUs on a filesystem that has done sufficient
(petabytes) reads; this is now handled.
One notable user reported bugfix, where we were forgetting to
correctly set the bucket data type, which should have been
BCH_DATA_need_gc_gens instead of BCH_DATA_free; this was causing us to
go emergency read-only on a filesystem that had seen heavy enough use
to see bucket gen wraparoud.
We're now starting to fix simple (safe) errors without requiring user
intervention - i.e. a small incremental step towards full self
healing.
This is currently limited to just certain allocation information
counters, and the error is still logged in the superblock; see that
patch for more information. ("bcachefs: Fix safe errors by default")"
* tag 'bcachefs-2024-06-22' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Move the ei_flags setting to after initialization
bcachefs: Fix a UAF after write_super()
bcachefs: Use bch2_print_string_as_lines for long err
bcachefs: Fix I_NEW warning in race path in bch2_inode_insert()
bcachefs: Replace bare EEXIST with private error codes
bcachefs: Fix missing alloc_data_type_set()
closures: Change BUG_ON() to WARN_ON()
bcachefs: fix alignment of VMA for memory mapped files on THP
bcachefs: Fix safe errors by default
bcachefs: Fix bch2_trans_put()
bcachefs: set_worker_desc() for delete_dead_snapshots
bcachefs: Fix bch2_sb_downgrade_update()
bcachefs: Handle cached data LRU wraparound
bcachefs: Guard against overflowing LRU_TIME_BITS
bcachefs: delete_dead_snapshots() doesn't need to go RW
bcachefs: Fix early init error path in journal code
bcachefs: Check for invalid btree IDs
bcachefs: Fix btree ID bitmasks
bcachefs: Fix shift overflow in read_one_super()
bcachefs: Fix a locking bug in the do_discard_fast() path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- We currently enable DIPM (device initiated power management) in the
device (using a SET FEATURES call to the device), regardless if the
HBA supports any LPM states or not. It seems counter intuitive, and
potentially dangerous to enable a device side feature, when the HBA
does not have the corresponding support. Thus, make sure that we do
not enable DIPM if the HBA does not support any LPM states.
* tag 'ata-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Do not enable LPM if no LPM states are supported by the HBA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Three fixes for the pwm-stm32 driver.
The first patch prevents an integer wrap-around for small periods. In
the second patch the calculation of the prescaler is fixed which
resulted in values for the ARR register that don't fit into the
corresponding register bit field. The last commit improves an error
message that was wrongly copied from another error path"
* tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix error message to not describe the previous error path
pwm: stm32: Fix calculation of prescaler
pwm: stm32: Refuse too small period requests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci firmware
driver and SD card support on the milkv duo riscv board"
* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: psci: Fix return value from psci_system_suspend()
riscv: dts: sophgo: disable write-protection for milkv duo
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some hw breakpoint fixes, an objtool build warnging fix, and a trivial
cleanup"
* tag 'loongarch-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Remove an unneeded semicolon
LoongArch: Fix multiple hardware watchpoint issues
LoongArch: Trigger user-space watchpoints correctly
LoongArch: Fix watchpoint setting error
LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
|
|
"Failed to lock the clock" is an appropriate error message for
clk_rate_exclusive_get() failing, but not for the clock running too
fast for the driver's calculations.
Adapt the error message accordingly.
Fixes: d44d635635a7 ("pwm: stm32: Fix for settings using period > UINT32_MAX")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/285182163211203fc823a65b180761f46e828dcb.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
A small prescaler is beneficial, as this improves the resolution of the
duty_cycle configuration. However if the prescaler is too small, the
maximal possible period becomes considerably smaller than the requested
value.
One situation where this goes wrong is the following: With a parent
clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for
period = 941243 ns currently results in PSC = 1. The value for ARR is
then calculated to
ARR = 941243 * 208877930 / (1000000000 * 2) - 1 = 98301
This value is bigger than 65535 however and so doesn't fit into the
respective register field. In this particular case the PWM was
configured for a period of 313733.4806027616 ns (with ARR = 98301 &
0xffff). Even if ARR was configured to its maximal value, only period =
627495.6861167669 ns would be achievable.
Fix the calculation accordingly and adapt the comment to match the new
algorithm.
With the calculation fixed the above case results in PSC = 2 and so an
actual period of 941229.1667195285 ns.
Fixes: 8002fbeef1e4 ("pwm: stm32: Calculate prescaler with a division instead of a loop")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b4d96b79917617434a540df45f20cb5de4142f88.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
With new connector model, tc358767 will not create the connector, when
DRM_BRIDGE_ATTACH_NO_CONNECTOR is set and display-controller driver will
rely on format negotiation to setup the encoder format.
Add the missing bus format negotiation hooks in the
drm_bridge_funcs to complete DRM_BRIDGE_ATTACH_NO_CONNECTOR support.
Output format, for DPI/DSI to DP, is selected to
MEDIA_BUS_FMT_RGB888_1X24 as default, keeping in mind what the older
model used to support.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/24282420-b4dd-45b3-bb1c-fc37fe4a8205@siemens.com/
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108-tc358767-v2-1-25c5f70a2159@ideasonboard.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
There are 2 types of outstanding tx skb's:
Type 1: Packets that are sitting in the drivers ind_buff that are
waiting to be batch sent to the NIC. During a device reset, these are
freed with a call to ibmvnic_tx_scrq_clean_buffer()
Type 2: Packets that have been sent to the NIC and are awaiting a TX
completion IRQ. These are free'd during a reset with a call to
clean_tx_pools()
During any reset which requires us to free the tx irq, ensure that the
Type 2 skb references are freed. Since the irq is released, it is
impossible for the NIC to inform of any completions.
Furthermore, later in the reset process is a call to init_tx_pools()
which marks every entry in the tx pool as free (ie not outstanding).
So if the driver is to make a call to init_tx_pools(), it must first
be sure that the tx pool is empty of skb references.
This issue was discovered by observing the following in the logs during
EEH testing:
TX free map points to untracked skb (tso_pool 0 idx=4)
TX free map points to untracked skb (tso_pool 0 idx=5)
TX free map points to untracked skb (tso_pool 1 idx=36)
Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pairs
This not only includes rewording, but also where to put which emphasis
on terms in this document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Because Linux can be a target as well, add terminology to differentiate
between Linux being the target and Linux accessing targets.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
We now have the updated I2C specs and our own Code of Conduct, so we
have all we need to switch over to the inclusive terminology. Define
them here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Fastest I2C mode is 5 MHz. Update the docs and reword the paragraph
slightly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Luckily, the specs are directly downloadable again, so update the link.
Also update its title to the original name "I²C".
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Change the first paragraphs to contain only one space after the end of
the previous sentence like in the rest of the document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The TI eQEP clock is both a functional and interface clock. Since it is
required for the device to function, we should be enabling it at probe.
Up to now, we've just been lucky that the clock was enabled by something
else on the system already.
Fixes: f213729f6796 ("counter: new TI eQEP driver")
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240621-ti-eqep-enable-clock-v2-1-edd3421b54d4@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Don't accept TT entries for out-of-spec VIDs, by Sven Eckelmann
- Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only
callbacks", by Linus Lüssing
* tag 'batadv-net-pullrequest-20240621' of git://git.open-mesh.org/linux-merge:
Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks"
batman-adv: Don't accept TT entries for out-of-spec VIDs
====================
Link: https://patch.msgid.link/20240621143915.49137-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-06-21
The first patch is by Oleksij Rempel, it enhances the error handling
for tightly received RTS message in the j1939 protocol.
Shigeru Yoshida's patch fixes a kernel information leak in
j1939_send_one() in the j1939 protocol.
Followed by a patch by Oleksij Rempel for the j1939 protocol, to
properly recover from a CAN bus error during BAM transmission.
A patch by Chen Ni properly propagates errors in the kvaser_usb
driver.
The last patch is by Vitor Soares, that fixes an infinite loop in the
mcp251xfd driver is SPI async sending fails during xmit.
* tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: fix infinite loop when xmit fails
can: kvaser_usb: fix return value for hif_usb_send_regout
net: can: j1939: recover socket queue on CAN bus error during BAM transmission
net: can: j1939: Initialize unused data in j1939_send_one()
net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
====================
Link: https://patch.msgid.link/20240621121739.434355-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure the inner IP header is part of the skb's linear data before
setting old_iph. Otherwise, on a non-linear skb, old_iph could point
outside of the packet data.
Unlike classical VXLAN, which always encapsulates Ethernet packets,
VXLAN-GPE can transport IP packets directly. In that case, we need to
look at skb->protocol to figure out if an Ethernet header is present.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/2aa75f6fa62ac9dbe4f16ad5ba75dd04a51d4b99.1718804000.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
