summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-19drm/i915/psr: Set SU area width as pipe src widthJouni Högander
Currently SU area width is set as MAX_INT. This is causing problems. Instead set it as pipe src width. Fixes: 86b26b6aeac7 ("drm/i915/psr: Carry su area in crtc_state") Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618053026.3268759-2-jouni.hogander@intel.com
2024-06-18cifs: drop the incorrect assertion in cifs_swap_rw()Barry Song
Since commit 2282679fb20b ("mm: submit multipage write for SWP_FS_OPS swap-space"), we can plug multiple pages then unplug them all together. That means iov_iter_count(iter) could be way bigger than PAGE_SIZE, it actually equals the size of iov_iter_npages(iter, INT_MAX). Note this issue has nothing to do with large folios as we don't support THP_SWPOUT to non-block devices. Fixes: 2282679fb20b ("mm: submit multipage write for SWP_FS_OPS swap-space") Reported-by: Christoph Hellwig <hch@lst.de> Closes: https://lore.kernel.org/linux-mm/20240614100329.1203579-1-hch@lst.de/ Cc: NeilBrown <neilb@suse.de> Cc: Anna Schumaker <anna@kernel.org> Cc: Steve French <sfrench@samba.org> Cc: Trond Myklebust <trondmy@kernel.org> Cc: Chuanhua Han <hanchuanhua@oppo.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Paulo Alcantara <pc@manguebit.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Shyam Prasad N <sprasad@microsoft.com> Cc: Tom Talpey <tom@talpey.com> Cc: Bharath SM <bharathsm@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-06-18net: stmmac: No need to calculate speed divider when offload is disabledXiaolei Wang
commit be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") introduced a problem. When deleting, it prompts "Invalid portTransmitRate 0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable. Only when offload is enabled, speed divider needs to be calculated. Fixes: be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-18net: phy: dp83tg720: get master/slave configuration in link down stateOleksij Rempel
Get master/slave configuration for initial system start with the link in down state. This ensures ethtool shows current configuration. Also fixes link reconfiguration with ethtool while in down state, preventing ethtool from displaying outdated configuration. Even though dp83tg720_config_init() is executed periodically as long as the link is in admin up state but no carrier is detected, this is not sufficient for the link in admin down state where dp83tg720_read_status() is not periodically executed. To cover this case, we need an extra read role configuration in dp83tg720_config_aneg(). Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240614094516.1481231-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-18net: phy: dp83tg720: wake up PHYs in managed modeOleksij Rempel
In case this PHY is bootstrapped for managed mode, we need to manually wake it. Otherwise no link will be detected. Cc: stable@vger.kernel.org Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240614094516.1481231-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-19riscv: dts: sophgo: disable write-protection for milkv duoHaylen Chu
Milkv Duo does not have a write-protect pin, so disable write protect to prevent SDcards misdetected as read-only. Fixes: 89a7056ed4f7 ("riscv: dts: sophgo: add sdcard support for milkv duo") Signed-off-by: Haylen Chu <heylenay@outlook.com> Link: https://lore.kernel.org/r/SEYPR01MB4221943C7B101DD2318DA0D3D7CE2@SEYPR01MB4221.apcprd01.prod.exchangelabs.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-06-18Merge tag 'linux_kselftest-fixes-6.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: - filesystems: warn_unused_result warnings - seccomp: format-zero-length warnings - fchmodat2: clang build warnings due to-static-libasan - openat2: clang build warnings due to static-libasan, LOCAL_HDRS * tag 'linux_kselftest-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/fchmodat2: fix clang build failure due to -static-libasan selftests/openat2: fix clang build failures: -static-libasan, LOCAL_HDRS selftests: seccomp: fix format-zero-length warnings selftests: filesystems: fix warn_unused_result build warnings
2024-06-18selftests: openvswitch: Use bash as interpreterSimon Horman
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to obtain the first character of $ns. Empirically, this is works with bash but not dash. When run with dash these evaluate to an empty string and printing an error to stdout. # dash -c 'ns=client; echo "${ns:0:1}"' 2>error # cat error dash: 1: Bad substitution # bash -c 'ns=client; echo "${ns:0:1}"' 2>error c # cat error This leads to tests that neither pass nor fail. F.e. TEST: arp_ping [START] adding sandbox 'test_arp_ping' Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , } create namespaces ./openvswitch.sh: 282: eval: Bad substitution TEST: ct_connect_v4 [START] adding sandbox 'test_ct_connect_v4' Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , } ./openvswitch.sh: 322: eval: Bad substitution create namespaces Resolve this by making openvswitch.sh a bash script. Fixes: 918423fda910 ("selftests: openvswitch: add an initial flow programming case") Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240617-ovs-selftest-bash-v1-1-7ae6ccd3617b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-18ptp: fix integer overflow in max_vclocks_storeDan Carpenter
On 32bit systems, the "4 * max" multiply can overflow. Use kcalloc() to do the allocation to prevent this. Fixes: 44c494c8e30e ("ptp: track available ptp vclocks information") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Heng Qi <hengqi@linux.alibaba.com> Link: https://lore.kernel.org/r/ee8110ed-6619-4bd7-9024-28c1f2ac24f4@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-18spi: Fix SPI slave probe failureAmit Kumar Mahapatra
While adding a SPI device, the SPI core ensures that multiple logical CS doesn't map to the same physical CS. For example, spi->chip_select[0] != spi->chip_select[1] and so forth. However, unlike the SPI master, the SPI slave doesn't have the list of chip selects, this leads to probe failure when the SPI controller is configured as slave. Update the __spi_add_device() function to perform this check only if the SPI controller is configured as master. Fixes: 4d8ff6b0991d ("spi: Add multi-cs memories support in SPI core") Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Link: https://msgid.link/r/20240617153052.26636-1-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-18drm/xe/oa: Enable Xe2+ overrun modeAshutosh Dixit
Enable Xe2+ overrun mode. For Xe2+, when overrun mode is enabled, there are no partial reports at the end of buffer, making the OA buffer effectively a non-power-of-2 size circular buffer whose size, circ_size, is a multiple of the report size. v2: Fix implementation of xe_oa_circ_diff/xe_oa_circ_incr (Umesh) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-18-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa: Changes to OA_TAKENAshutosh Dixit
Rename OA_TAKEN to xe_oa_circ_diff, since xe_oa_circ_diff better describes what the macro actually does. Also convert to function and add xe_oa_stream arg. These will be used in the following patch. Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-17-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa: Override GuC RC with OA on PVCAshutosh Dixit
On PVC, a w/a resets RCS/CCS before it goes into RC6. This breaks OA since OA does not expect engine resets during its use. Fix it by disabling RC6. v2: Convert to gt oriented error/warn messages (Michal) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-16-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa: Add MMIO trigger supportAshutosh Dixit
Add MMIO trigger support and allow-list required registers for MMIO trigger use case. Registers are whitelisted for the lifetime of the driver but MMIO trigger is enabled only for the duration of the stream. Bspec: 45925, 60340, 61228 Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-15-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa/uapi: OA buffer mmapAshutosh Dixit
Allow the OA buffer to be mmap'd to userspace. This is needed for the MMIO trigger use case. Even otherwise, with whitelisted OA head/tail ptr registers, userspace can receive/interpret OA data from the mmap'd buffer without issuing read()'s on the OA stream fd. v2: Remove unmap_mapping_range from xe_oa_release (Thomas H) Use vm_flags_mod (Umesh) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-14-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa/uapi: Query OA unit propertiesAshutosh Dixit
Implement query for properties of OA units present on a device. v2: Clean up reserved/pad fields (Umesh) Follow the same scheme as other query structs v3: Skip reporting reserved engines attached to OA units v4: Expose oa_buf_size via DRM_XE_PERF_IOCTL_INFO (Umesh) v5: Don't expose capabilities as OR of properties (Umesh) v6: Add extensions to query output structs: drm_xe_oa_unit, drm_xe_query_oa_units and drm_xe_oa_stream_info v7: Change oa_units[] array to __u64 type Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-13-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa: Add OAC supportAshutosh Dixit
Similar to OAR, allow userspace to execute MI_REPORT_PERF_COUNT on compute engines of a specified exec queue. Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-12-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa: Add OAR supportAshutosh Dixit
Add OAR support to allow userspace to execute MI_REPORT_PERF_COUNT on render engines. Configuration batches are used to program the OAR unit, as well as modifying the render engine context image of a specified exec queue (to have correct register values when that context switches in). v2: Rename/refactor xe_oa_modify_self (Umesh) v3: Move IS_MI_LRI_CMD() into xe_oa.c (Michal) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-11-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa/uapi: Read file_operationAshutosh Dixit
Implement the OA stream read file_operation. Both blocking and non-blocking reads are supported. As part of read system call, the read copies OA perf data from the OA buffer to the user buffer, after appending packet headers for status and data packets. v2: Drop OA report headers, implement DRM_XE_PERF_IOCTL_STATUS (Umesh) v3: Introduce 'struct drm_xe_oa_stream_status' v4: Define oa_status register bitfields (Umesh) v5: Add extensions to 'struct drm_xe_oa_stream_status' v6: Minor cleanup, eliminate report32 variable v7: Use -EIO to signal to userspace to read OASTATUS using DRM_XE_PERF_IOCTL_STATUS, change previous sites returning -EIO to return -EINVAL Make drm_xe_oa_stream_status bits contiguous (Jose, Umesh) rmw oa_status bits (Umesh) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-10-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa/uapi: Expose OA stream fdAshutosh Dixit
The OA stream open perf op returns an fd with its own file_operations for the newly initialized OA stream. These file_operations allow userspace to enable or disable the stream, as well as apply a different metric configuration for the OA stream. Userspace can also poll for data availability. OA stream initialization is completed in this commit by enabling the OA stream. When sampling is enabled this starts a hrtimer which periodically checks for data availablility. v2: Use stream properties for stream reconfiguration with DRM_XE_PERF_IOCTL_CONFIG v3: Hold runtime_pm reference across oa buffer alloc/free v4: Fix 32 bit build Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-9-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa: OA stream initialization (OAG)Ashutosh Dixit
Implement majority of OA stream initialization (as part of OA stream open) ioctl). OAG buffer is allocated for receiving perf counter samples from HW. OAG unit is initialized and the selected OA metric configuration is programmed into OAG unit HW using a command/batch buffer. Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-8-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa/uapi: Define and parse OA stream propertiesAshutosh Dixit
Properties for OA streams are specified by user space, when the stream is opened, as a chain of drm_xe_ext_set_property struct's. Parse and validate these stream properties. v2: Remove struct drm_xe_oa_open_param (Harish Chegondi) Drop DRM_XE_OA_PROPERTY_POLL_OA_PERIOD_US (Umesh) Eliminate comparison with xe_oa_max_sample_rate (Umesh) Drop 'struct drm_xe_oa_record_header' (Umesh) v3: s/DRM_XE_OA_PROPERTY_OA_EXPONENT/ \ DRM_XE_OA_PROPERTY_OA_PERIOD_EXPONENT/ (Jose) v4: Fix 32 bit build v5: Add non-static function kernel doc (Michal) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-7-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa/uapi: Add/remove OA config perf opsAshutosh Dixit
Introduce add/remove config perf ops for OA. OA configurations consist of a set of event/counter select register address/value pairs. The add_config perf op validates and stores such configurations and also exposes them in the metrics sysfs. These configurations will be programmed to OA unit HW when an OA stream using a configuration is opened. The OA stream can also switch to other stored configurations. v2: Start config id's from 1 and other minor review comments (Umesh) v3: Add 32 bit build v4: Add kernel doc for non-static functions (Michal) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-6-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa/uapi: Initialize OA unitsAshutosh Dixit
Initialize OA unit data struct's for each gt during device probe. Also assign OA units for hardware engines. v2: Remove XE_OA_UNIT_OAG/XE_OA_UNIT_OAM_SAMEDIA_0 enum (Umesh) Change mtl_oa_base to 0x13000 (Umesh) v3: Switch to drmm_ functions and other cleanups (Michal) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-5-ashutosh.dixit@intel.com
2024-06-18drm/xe/oa/uapi: Add OA data formatsAshutosh Dixit
Add and initialize supported OA data formats for various platforms (including Xe2). User can request OA data in any supported format. Bspec: 52198, 60942, 61101 v2: Start 'xe_oa_format_name' enum from 0 (Umesh) Fix error rewind with OA (Umesh) v3: Use graphics versions rather than absolute platform names v4: Add missing kernel doc for struct memebers and enum and other minor changes (Michal) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-4-ashutosh.dixit@intel.com
2024-06-18drm/xe/perf/uapi: Add perf_stream_paranoid sysctlAshutosh Dixit
Normally only superuser/root can access perf counter data. However, superuser can set perf_stream_paranoid sysctl to 0 to allow non-privileged users to also access perf data. perf_stream_paranoid is introduced at the perf layer to allow different perf stream types to share this access mechanism. v2: Add kernel doc for non-static functions (Michal) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-3-ashutosh.dixit@intel.com
2024-06-18drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream typesAshutosh Dixit
In Xe, the plan is to support multiple types of perf counter streams (OA is only one type of these streams). Rather than introduce NxM ioctls for these (N perf streams with M ioctl's per perf stream), we decide to multiplex these (N different stream types and the M ops for each of these stream types) through a single PERF ioctl. This multiplexing is the purpose of the PERF layer. In addition to PERF DRM ioctl's, another set of ioctl's on the PERF fd are defined. These are expected to be common to different PERF stream types and therefore defined at the PERF layer itself. v2: Add param_size to 'struct drm_xe_perf_param' (Umesh) v3: Rename 'enum drm_xe_perf_ops' to 'enum drm_xe_perf_ioctls' (Guy Zadicario) Add DRM_ prefix to ioctl names to indicate uapi names v4: Add 'enum drm_xe_perf_op' previously missed out (Guy Zadicario) v5: Squash the ops and PERF layer patches into a single patch (Umesh) Remove param_size from struct 'drm_xe_perf_param' (Umesh) v6: Add DRM_XE_PERF_IOCTL_STATUS v7: Add DRM_XE_PERF_IOCTL_INFO v8: Fix Copyright years, fix DRM_XE_PERF_TYPE_MAX, move '#include "xe_perf.h"' to xe_perf.c, add kernel doc (Michal) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Guy Zadicario <gzadicario@habana.ai> Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-2-ashutosh.dixit@intel.com
2024-06-18drm/xe/xe2: Add proper check for media in Wa_14020756599Lucas De Marchi
A temporary fixup was made in commit 24d0d98af1c3 ("drm/xe/xe2lpm: Fixup Wa_14020756599") due to limitations in the RTP infra. Now that RTP has support for OR condition that change can be removed. RTP now also supports checking any GT, so use that instead of the more specific xe_rtp_match_when_media2000() used in that commit. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-6-lucas.demarchi@intel.com
2024-06-18drm/xe/rtp: Add match on any GTLucas De Marchi
One surprising factor of GRAPHICS_VERSION()/MEDIA_VERSION() matching for people adding new WAs is that it implicitly checks that the graphics/media IP under check is of that specific type and not that the device contains a media/graphics IP of that version. Add a new *_ANY_GT() variant that can be used in that case. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-5-lucas.demarchi@intel.com
2024-06-18drm/xe/rtp: Allow to OR rulesLucas De Marchi
Some workarounds started to depend on different set of conditions where the action should be applied if any of them match. See e.g. commit 24d0d98af1c3 ("drm/xe/xe2lpm: Fixup Wa_14020756599"). Add XE_RTP_MATCH_OR that allows to implement a logical OR for the rules. Normal precedence applies: r1, r2, OR, r3 means (r1 AND r2) OR r3 The check is shortcut as soon as a set of conditions match. v2: Do not match on empty number of rules-other-than-OR evaluated Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-4-lucas.demarchi@intel.com
2024-06-18drm/xe/rtp: Expand max rules/actions per entryLucas De Marchi
Having at most 4 rules per entry is already reaching the maximum. Expand it to 6 to allow for more room. With the addition of OR condition for rules, this will very soon not be sufficient. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-3-lucas.demarchi@intel.com
2024-06-18drm/xe/rtp: Allow to match 0 sr entriesLucas De Marchi
If none of the rules match, there should be 0 entries in the sr xarray, so none of them should have a register matching. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-2-lucas.demarchi@intel.com
2024-06-18ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64Shuming Fan
Dell SKU 0C64 has a single rt1318 amplifier. The prefix name of control still needs to be set rt1318-1 corresponding to UCM config. Signed-off-by: Shuming Fan <shumingf@realtek.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://msgid.link/r/20240612075740.1678082-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-18cpumask: limit FORCE_NR_CPUS to just the UP caseLinus Torvalds
Hardcoding the number of CPUs at compile time does improve code generation, but if you get it wrong the result will be confusion. We already limited this earlier to only "experts" (see commit fe5759d5bfda "cpumask: limit visibility of FORCE_NR_CPUS"), but with distro kernel configs often having EXPERT enabled, that turns out to not be much of a limit. To quote the philosophers at Disney: "Everyone can be an expert. And when everyone's an expert, no one will be". There's a runtime warning if you then set nr_cpus to anything but the forced number, but apparently that can be ignored too [1] and by then it's pretty much too late anyway. If we had some real way to limit this to "embedded only", maybe it would be worth it, but let's see if anybody even notices that the option is gone. We need to simplify kernel configuration anyway. Link: https://lore.kernel.org/all/20240618105036.208a8860@rorschach.local.home/ [1] Reported-by: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Paul McKenney <paulmck@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-06-18KVM: Stop processing *all* memslots when "null" mmu_notifier handler is foundBabu Moger
Bail from outer address space loop, not just the inner memslot loop, when a "null" handler is encountered by __kvm_handle_hva_range(), which is the intended behavior. On x86, which has multiple address spaces thanks to SMM emulation, breaking from just the memslot loop results in undefined behavior due to assigning the non-existent return value from kvm_null_fn() to a bool. In practice, the bug is benign as kvm_mmu_notifier_invalidate_range_end() is the only caller that passes handler=kvm_null_fn, and it doesn't set flush_on_ret, i.e. assigning garbage to r.ret is ultimately ignored. And for most configuration the compiler elides the entire sequence, i.e. there is no undefined behavior at runtime. ------------[ cut here ]------------ UBSAN: invalid-load in arch/x86/kvm/../../../virt/kvm/kvm_main.c:655:10 load of value 160 is not a valid value for type '_Bool' CPU: 370 PID: 8246 Comm: CPU 0/KVM Not tainted 6.8.2-amdsos-build58-ubuntu-22.04+ #1 Hardware name: AMD Corporation Sh54p/Sh54p, BIOS WPC4429N 04/25/2024 Call Trace: <TASK> dump_stack_lvl+0x48/0x60 ubsan_epilogue+0x5/0x30 __ubsan_handle_load_invalid_value+0x79/0x80 kvm_mmu_notifier_invalidate_range_end.cold+0x18/0x4f [kvm] __mmu_notifier_invalidate_range_end+0x63/0xe0 __split_huge_pmd+0x367/0xfc0 do_huge_pmd_wp_page+0x1cc/0x380 __handle_mm_fault+0x8ee/0xe50 handle_mm_fault+0xe4/0x4a0 __get_user_pages+0x190/0x840 get_user_pages_unlocked+0xe0/0x590 hva_to_pfn+0x114/0x550 [kvm] kvm_faultin_pfn+0xed/0x5b0 [kvm] kvm_tdp_page_fault+0x123/0x170 [kvm] kvm_mmu_page_fault+0x244/0xaa0 [kvm] vcpu_enter_guest+0x592/0x1070 [kvm] kvm_arch_vcpu_ioctl_run+0x145/0x8a0 [kvm] kvm_vcpu_ioctl+0x288/0x6d0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x77/0x120 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ---[ end trace ]--- Fixes: 071064f14d87 ("KVM: Don't take mmu_lock for range invalidation unless necessary") Signed-off-by: Babu Moger <babu.moger@amd.com> Link: https://lore.kernel.org/r/b8723d39903b64c241c50f5513f804390c7b5eec.1718203311.git.babu.moger@amd.com [sean: massage changelog] Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-06-18bpf: Update BPF LSM maintainer listMatt Bobrowski
After catching up with KP recently, we discussed that I will be now be responsible for co-maintaining the BPF LSM. Adding myself as designated maintainer of the BPF LSM, and specifying more files in which the BPF LSM maintenance responsibilities should now extend out to. This is at the back of all the BPF kfuncs that have been added recently, which are fundamentally restricted to being used only from BPF LSM program types. Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/ZnA-1qdtXS1TayD7@google.com
2024-06-18bpf: Fix remap of arena.Alexei Starovoitov
The bpf arena logic didn't account for mremap operation. Add a refcnt for multiple mmap events to prevent use-after-free in arena_vm_close. Fixes: 317460317a02 ("bpf: Introduce bpf_arena.") Reported-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Barret Rhoden <brho@google.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Closes: https://lore.kernel.org/bpf/Zmuw29IhgyPNKnIM@xpf.sh.intel.com Link: https://lore.kernel.org/bpf/20240617171812.76634-1-alexei.starovoitov@gmail.com
2024-06-18drm/panic: depends on !VT_CONSOLEJocelyn Falempe
The race condition between fbcon and drm_panic can only occurs if VT_CONSOLE is set. So update drm_panic dependency accordingly. This will make it easier for Linux distributions to enable drm_panic by disabling VT_CONSOLE, and keeping fbcon terminal. The only drawback is that fbcon won't display the boot kmsg, so it should rely on userspace to do that. At least plymouth already handle this case with https://gitlab.freedesktop.org/plymouth/plymouth/-/merge_requests/224 Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240613154041.325964-1-jfalempe@redhat.com
2024-06-18Merge tag 'efi-fixes-for-v6.10-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: "Another small set of EFI fixes. Only the x86 one is likely to affect any actual users (and has a cc:stable), but the issue it fixes was only observed in an unusual context (kexec in a confidential VM). - Ensure that EFI runtime services are not unmapped by PAN on ARM - Avoid freeing the memory holding the EFI memory map inadvertently on x86 - Avoid a false positive kmemleak warning on arm64" * tag 'efi-fixes-for-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/arm64: Fix kmemleak false positive in arm64_efi_rt_init() efi/x86: Free EFI memory map only when installing a new one. efi/arm: Disable LPAE PAN when calling EFI runtime services
2024-06-18spi: Fix OCTAL mode supportPatrice Chotard
Add OCTAL mode support. Issue detected using "--octal" spidev_test's option. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://msgid.link/r/20240618132951.2743935-4-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-18spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4Patrice Chotard
In case usage of OCTAL mode, buswidth parameter can take the value 8. As return value of stm32_qspi_get_mode() is used to configure fields of CCR registers that are 2 bits only (fields IMODE, ADMODE, ADSIZE, DMODE), clamp return value of stm32_qspi_get_mode() to 4. Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback") Cc: stable@vger.kernel.org Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://msgid.link/r/20240618132951.2743935-3-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-18spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()Patrice Chotard
Misplaced parenthesis make test of mode wrong in case mode is equal to SPI_TX_OCTAL or SPI_RX_OCTAL. Simplify this sanity test, if one of this bit is set, property cs-gpio must be present in DT. Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback") Cc: stable@vger.kernel.org Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://msgid.link/r/20240618132951.2743935-2-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-18sched: act_ct: add netns into the key of tcf_ct_flow_tableXin Long
zones_ht is a global hashtable for flow_table with zone as key. However, it does not consider netns when getting a flow_table from zones_ht in tcf_ct_init(), and it means an act_ct action in netns A may get a flow_table that belongs to netns B if it has the same zone value. In Shuang's test with the TOPO: tcf2_c <---> tcf2_sw1 <---> tcf2_sw2 <---> tcf2_s tcf2_sw1 and tcf2_sw2 saw the same flow and used the same flow table, which caused their ct entries entering unexpected states and the TCP connection not able to end normally. This patch fixes the issue simply by adding netns into the key of tcf_ct_flow_table so that an act_ct action gets a flow_table that belongs to its own netns in tcf_ct_init(). Note that for easy coding we don't use tcf_ct_flow_table.nf_ft.net, as the ct_ft is initialized after inserting it to the hashtable in tcf_ct_flow_table_get() and also it requires to implement several functions in rhashtable_params including hashfn, obj_hashfn and obj_cmpfn. Fixes: 64ff70b80fd4 ("net/sched: act_ct: Offload established connections to flow table") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1db5b6cc6902c5fc6f8c6cbd85494a2008087be5.1718488050.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18tipc: force a dst refcount before doing decryptionXin Long
As it says in commit 3bc07321ccc2 ("xfrm: Force a dst refcount before entering the xfrm type handlers"): "Crypto requests might return asynchronous. In this case we leave the rcu protected region, so force a refcount on the skb's destination entry before we enter the xfrm type input/output handlers." On TIPC decryption path it has the same problem, and skb_dst_force() should be called before doing decryption to avoid a possible crash. Shuang reported this issue when this warning is triggered: [] WARNING: include/net/dst.h:337 tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Kdump: loaded Tainted: G W --------- - - 4.18.0-496.el8.x86_64+debug [] Workqueue: crypto cryptd_queue_worker [] RIP: 0010:tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Call Trace: [] tipc_sk_mcast_rcv+0x548/0xea0 [tipc] [] tipc_rcv+0xcf5/0x1060 [tipc] [] tipc_aead_decrypt_done+0x215/0x2e0 [tipc] [] cryptd_aead_crypt+0xdb/0x190 [] cryptd_queue_worker+0xed/0x190 [] process_one_work+0x93d/0x17e0 Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/fbe3195fad6997a4eec62d9bf076b2ad03ac336b.1718476040.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18drm/xe/vf: Don't touch GuC irq registers if using memory irqsMichal Wajdeczko
On platforms where VFs are using memory based interrupts, we missed invalid access to no longer existing interrupt registers, as we keep them marked with XE_REG_OPTION_VF. To fix that just either setup memirq vectors in GuC or enable legacy interrupts. Fixes: aef4eb7c7dec ("drm/xe/vf: Setup memory based interrupts in GuC") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240617154736.685-1-michal.wajdeczko@intel.com
2024-06-18net/sched: act_api: fix possible infinite loop in tcf_idr_check_alloc()David Ruth
syzbot found hanging tasks waiting on rtnl_lock [1] A reproducer is available in the syzbot bug. When a request to add multiple actions with the same index is sent, the second request will block forever on the first request. This holds rtnl_lock, and causes tasks to hang. Return -EAGAIN to prevent infinite looping, while keeping documented behavior. [1] INFO: task kworker/1:0:5088 blocked for more than 143 seconds. Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb45594619 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000 Workqueue: events_power_efficient reg_check_chans_work Call Trace: <TASK> context_switch kernel/sched/core.c:5409 [inline] __schedule+0xf15/0x5d00 kernel/sched/core.c:6746 __schedule_loop kernel/sched/core.c:6823 [inline] schedule+0xe7/0x350 kernel/sched/core.c:6838 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895 __mutex_lock_common kernel/locking/mutex.c:684 [inline] __mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752 wiphy_lock include/net/cfg80211.h:5953 [inline] reg_leave_invalid_chans net/wireless/reg.c:2466 [inline] reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481 Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action") Reported-by: syzbot+b87c222546179f4513a7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b87c222546179f4513a7 Signed-off-by: David Ruth <druth@chromium.org> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240614190326.1349786-1-druth@chromium.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18Merge branch 'net-lan743x-fixes-for-multiple-wol-related-issues'Paolo Abeni
Raju Lakkaraju says: ==================== net: lan743x: Fixes for multiple WOL related issues This patch series implement the following fixes: 1. Disable WOL upon resume in order to restore full data path operation 2. Support WOL at both the PHY and MAC appropriately 3. Remove interrupt mask clearing from config_init Patch-3 was sent seperately earlier. Review comments in link: https://lore.kernel.org/lkml/4a565d54-f468-4e32-8a2c-102c1203f72c@lunn.ch/T/ ==================== Link: https://lore.kernel.org/r/20240614171157.190871-1-Raju.Lakkaraju@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18net: phy: mxl-gpy: Remove interrupt mask clearing from config_initRaju Lakkaraju
When the system resumes from sleep, the phy_init_hw() function invokes config_init(), which clears all interrupt masks and causes wake events to be lost in subsequent wake sequences. Remove interrupt mask clearing from config_init() and preserve relevant masks in config_intr(). Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18net: lan743x: Support WOL at both the PHY and MAC appropriatelyRaju Lakkaraju
Prevent options not supported by the PHY from being requested to it by the MAC Whenever a WOL option is supported by both, the PHY is given priority since that usually leads to better power savings. Fixes: e9e13b6adc33 ("lan743x: fix for potential NULL pointer dereference with bare card") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18net: lan743x: disable WOL upon resume to restore full data path operationRaju Lakkaraju
When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering a system event can wake the system from sleep, which may block the data path. To restore normal data path functionality after waking, disable all wake-up events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing 1's to them. Fixes: 4d94282afd95 ("lan743x: Add power management support") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 12:25:52 +0000