summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-22MAINTAINERS: Add limited globs for Networking headersSimon Horman
This aims to add limited globs to improve the coverage of header files in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections. It is done so in a minimal way to exclude overlap with other sections. And so as not to require "X" entries to exclude files otherwise matched by these new globs. While imperfect, due to it's limited nature, this does extend coverage of header files by these sections. And aims to automatically cover new files that seem very likely belong to these sections. The include/linux/netdev* glob (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdevice_xmit.h - include/linux/netdev_features.h The include/uapi/linux/netdev* globs: (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdev.h The include/linux/skbuff* glob (NETWORKING [GENERAL] section only): + Subsumes the entry for: - include/linux/skbuff.h + Extends the section to cover - include/linux/skbuff_ref.h A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL] section. Although it would subsume the entry for include/uapi/linux/net_namespace.h, which is fine, it would also extend coverage to: - include/uapi/linux/net_dropmon.h, which belongs to the NETWORK DROP MONITOR section - include/uapi/linux/net_tstamp.h which, as per an earlier patch in this series, belongs to the SOCKET TIMESTAMPING section Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING sectionSimon Horman
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add sonet.h to ATM section of MAINTAINERSSimon Horman
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. It seems that sonet.h is included in ATM related source files, and thus that ATM is the most relevant section for these files. Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22powerpc/mm: Fix return type of pgd_val()Christophe Leroy
Commit 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)") switched PGD entries to 64 bits, but pgd_val() returns an unsigned long which is 32 bits on PPC32. This is not a problem for regular PMD entries because the upper part is always NULL, but when PMD entries are leaf they contain 64 bits values, so pgd_val() must return an unsigned long long instead of an unsigned long. Also change the condition to CONFIG_PPC_85xx instead of CONFIG_PPC_E500 as the change was meant for 32 bits only. Allthough this should be harmless on PPC64, it generates a warning with pgd_ERROR print. Fixes: 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/45f8fdf298ec3df7573b66d21b03a5cda92e2cb1.1724313510.git.christophe.leroy@csgroup.eu
2024-08-22powerpc/vdso: Don't discard rela sectionsChristophe Leroy
After building the VDSO, there is a verification that it contains no dynamic relocation, see commit aff69273af61 ("vdso: Improve cmd_vdso_check to check all dynamic relocations"). This verification uses readelf -r and doesn't work if rela sections are discarded. Fixes: 8ad57add77d3 ("powerpc/build: vdso linker warning for orphan sections") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/45c3e6fc76cad05ad2cac0f5b5dfb4fae86dc9d6.1724153239.git.christophe.leroy@csgroup.eu
2024-08-22powerpc/64e: Define mmu_pte_psize staticChristophe Leroy
mmu_pte_psize is only used in the tlb_64e.c, define it static. Fixes: 25d21ad6e799 ("powerpc: Add TLB management code for 64-bit Book3E") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408011256.1O99IB0s-lkp@intel.com/ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/beb30d280eaa5d857c38a0834b147dffd6b28aa9.1724157750.git.christophe.leroy@csgroup.eu
2024-08-22drm/xe: remove display stepping handlingJani Nikula
The code is now unused. Remove. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/19bc7a3197f2bc6f3c0d337487ab19f3b7f5612a.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915: remove display stepping handlingJani Nikula
The code is now unused. Remove. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d64c5e8563dcb8858569d5578230f6b675acdafb.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915/display: switch to display detected steppingsJani Nikula
Move the stepping related macros over to display. We can proceed to remove the compat macros from xe. Note: Looks like we've failed to actually initialize the display stepping for GMD ID based platforms in the xe driver. It does get set in display runtime info, but until now the compat macro used xe->info.step.display which was not set for GMD ID. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ce8bb94e1a801d3c345f1810837bdd1964c3af75.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915/display: identify display steppings in display probeJani Nikula
Both i915 and xe have code to identify display steppings. Start deduplicating this by, uh, adding a third copy in display code. This is not yet used for anything other than debug logging. We'll switch over later. For platforms before GMD ID, attach the mapping from PCI revision to stepping in the platform and subplatform descriptors. This is a considerably cleaner approach than having it completely separate. Also add a separate field for stepping in display runtime info, preserving the value from GMD ID. v2: Handle NULL subdesc (Matt) Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821095036.2044654-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915/display: rename IS_DISPLAY_IP_STEP() to IS_DISPLAY_VER_STEP()Jani Nikula
Unify macro naming on VER. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6861e02f3adf15d56e89890000eb195070c33c9b.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915/display: rename IS_DISPLAY_IP_RANGE() to IS_DISPLAY_VER_FULL()Jani Nikula
Unify macro naming. Be more in line with DISPLAY_VER() and IS_DISPLAY_VER(). Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/adb43f45ad0b1846c2cb9a5861ba1f727c41ae83.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/xe/step: define more steppings E-JJani Nikula
These are primarily needed for compat reasons with display code in upcoming changes. There's no harm in having them. While at it, add a comment about the requirement to match against GMD ID value spacing. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/88074394509d4849f8ec6ab5776394b961032cd0.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/xe/display: remove the unused compat HAS_GMD_ID()Jani Nikula
The display code no longer needs or uses HAS_GMD_ID(). Remove it from the compat header. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/67571bb0b10fb5c99dba57757f2213ef39bdedbb.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/xe/display: remove intel_display_step_name() to simplifyJani Nikula
The intel_display_step_name() is an unnecessary extra indirection. Simplify by just adding a macro to map intel_step_name() to xe_step_name(). We'll need to temporarily add a compat INTEL_DISPLAY_STEP() for this. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/cbea7def331cc9d2438da49ae344b9987f27cd12.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/xe/display: fix compat IS_DISPLAY_STEP() range endJani Nikula
It's supposed to be an open range at the end like in i915. Fingers crossed that nobody relies on this definition. Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fe8743770694e429f6902491cdb306c97bdf701a.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22ASoC: cs-amp-lib-test: Force test calibration blob entries to be validRichard Fitzgerald
For a normal calibration blob the calTarget values must be non-zero and unique, and the calTime values must be non-zero. Don't rely on get_random_bytes() to be random enough to guarantee this. Force the calTarget and calTime values to be valid while retaining randomness in the values. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 177862317a98 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers") Link: https://patch.msgid.link/20240822115725.259568-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-22spi: pxa2xx: Move PM runtime handling to the glue driversAndy Shevchenko
PCI and platform buses have different defaults for runtime PM. In particular PCI probe is assumed to be called when PM runtime is enabled by the PCI core. In this case if we try enable it again the PM runtime complaints with pxa2xx_spi_pci 0000:00:07.0: Unbalanced pm_runtime_enable! Fix this by moving PM runtime handling from the SPI PXA2xx core to the glue drivers. Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly") Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file") Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240822113408.750831-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-22spi: pxa2xx: Do not override dev->platform_data on probeAndy Shevchenko
The platform_data field may be supplied by legacy board code. In other cases we override it, and module remove and probe cycle will crash the kernel since it will carry a stale pointer. Fix this by supplying a third argument to the pxa2xx_spi_probe() and avoid overriding dev->platform_data. Reported-by: Hao Ma <hao.ma@intel.com> Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly") Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file") Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240822113408.750831-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-22wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power()Baochen Qiang
Commit 39dc8b8ea387 ("wifi: mac80211: pass parsed TPE data to drivers") breaks ath11k, leading to kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:ath11k_mac_get_eirp_power.isra.0+0x5b/0x80 [ath11k] Call Trace: <TASK> ath11k_mac_fill_reg_tpc_info+0x3d6/0x800 [ath11k] ath11k_mac_vdev_start_restart+0x412/0x4d0 [ath11k] ath11k_mac_op_sta_state+0x7bc/0xbb0 [ath11k] drv_sta_state+0xf1/0x5f0 [mac80211] sta_info_insert_rcu+0x28d/0x530 [mac80211] sta_info_insert+0xf/0x20 [mac80211] ieee80211_prep_connection+0x3b4/0x4c0 [mac80211] ieee80211_mgd_auth+0x363/0x600 [mac80211] The issue scenario is, AP advertises power spectral density (PSD) values in its transmit power envelope (TPE) IE and supports 160 MHz bandwidth in 6 GHz. When connecting to this AP, in ath11k_mac_parse_tx_pwr_env(), the local variable psd is true and then reg_tpc_info.num_pwr_levels is set to 8 due to 160 MHz bandwidth. Note here ath11k fails to set reg_tpc_info.is_psd_power as TRUE due to above commit. Then in ath11k_mac_fill_reg_tpc_info(), for each of the 8 power levels, for a PSD channel, ath11k_mac_get_psd_channel() is expected to be called to get required information. However due to invalid reg_tpc_info.is_psd_power, it is ath11k_mac_get_eirp_power() that gets called and passed with pwr_lvl_idx as one of the arguments. Note this function implicitly requires pwr_lvl_idx to be no more than 3. So when pwr_lvl_idx is larger than that ath11k_mac_get_seg_freq() returns invalid center frequency, with which as the input ieee80211_get_channel() returns NULL, then kernel crashes due to NULL pointer dereference. Fix it by setting reg_tpc_info.is_psd_power properly. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: 39dc8b8ea387 ("wifi: mac80211: pass parsed TPE data to drivers") Reported-by: Mikko Tiihonen <mikko.tiihonen@iki.fi> Tested-by: Mikko Tiihonen <mikko.tiihonen@iki.fi> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219131 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240813083808.9224-1-quic_bqiang@quicinc.com
2024-08-22octeontx2-af: Fix CPT AF register offset calculationBharat Bhushan
Some CPT AF registers are per LF and others are global. Translation of PF/VF local LF slot number to actual LF slot number is required only for accessing perf LF registers. CPT AF global registers access do not require any LF slot number. Also, there is no reason CPT PF/VF to know actual lf's register offset. Without this fix microcode loading will fail, VFs cannot be created and hardware is not usable. Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write") Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211FSava Jakovljev
The current implementation incorrectly sets the mode bit of the PHY chip. Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the configuration nibble of a LED- it should be set independently of the index of the LED being configured. As a consequence, the RTL8211F LED control is actually operating in Mode A. Fix the error by or-ing final register value to write with a const-value of RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly. Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F") Signed-off-by: Sava Jakovljev <savaj@meyersound.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COM Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22drm/vc4: v3d: simplify clock retrievalStefan Wahren
Common pattern of handling deferred probe can be simplified with dev_err_probe() and devm_clk_get_optional(). This results in much less code. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-6-wahrenst@gmx.net
2024-08-22drm/vc4: Get the rid of DRM_ERROR()Stefan Wahren
DRM_ERROR() has been deprecated in favor of pr_err(). However, we should prefer to use drm_err() whenever possible so we get device- specific output with the error message. In error case of kcalloc, we can simply drop DRM_ERROR(), because kcalloc already logs errors. Suggested-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-4-wahrenst@gmx.net
2024-08-22drm/vc4: hdmi: Handle error case of pm_runtime_resume_and_getStefan Wahren
The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect") introduced the necessary power management handling to avoid register access while controller is powered down. Unfortunately it just print a warning if pm_runtime_resume_and_get() fails and proceed anyway. This could happen during suspend to idle. So we must assume it is unsafe to access the HDMI register. So bail out properly. Fixes: 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maíra Canal <mcanal@igalia.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-3-wahrenst@gmx.net
2024-08-22net: ngbe: Fix phy mode set to external phyMengyuan Lou
The MAC only has add the TX delay and it can not be modified. MAC and PHY are both set the TX delay cause transmission problems. So just disable TX delay in PHY, when use rgmii to attach to external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers. And it is does not matter to internal phy. Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink") Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Cc: stable@vger.kernel.org # 6.3+ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22ALSA: hda/realtek - FIxed ALC285 headphone no soundKailang Yang
Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug headphone or headset. It had a chance to get no sound from headphone. Replace depop procedure will solve this issue. Signed-off-by: Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/d0de1b03fd174520945dde216d765223@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-22netfilter: flowtable: validate vlan headerPablo Neira Ayuso
Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline] Fixes: 4cd91f7c290f ("netfilter: flowtable: add vlan support") Reported-by: syzbot+8407d9bb88cd4c6bf61a@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-08-22usb: dwc3: st: add missing depopulate in probe error pathKrzysztof Kozlowski
Depopulate device in probe error paths to fix leak of children resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814093957.37940-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: st: fix probed platform device ref count on probe error pathKrzysztof Kozlowski
The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20240814093957.37940-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)Michael Grzeschik
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Commit f2e0eee47038 ("usb: dwc3: ep0: Don't reset resource alloc flag") was fixing the initial issue, but did this only for physical ep1. Since the function dwc3_ep0_stall_and_restart is resetting the flags for both physical endpoints, this also has to be done for ep0. Cc: stable@vger.kernel.org Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20240814-dwc3hwep0reset-v2-1-29e1d7d923ea@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in ↵Zijun Hu
remove_power_attributes() Device attribute group @usb3_hardware_lpm_attr_group is merged by add_power_attributes(), but it is not unmerged explicitly, fixed by unmerging it in remove_power_attributes(). Fixes: 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20240820-sysfs_fix-v2-1-a9441487077e@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: typec: fsa4480: Relax CHIP_ID checkLuca Weiss
Some FSA4480-compatible chips like the OCP96011 used on Fairphone 5 return 0x00 from the CHIP_ID register. Handle that gracefully and only fail probe when the I2C read has failed. With this the dev_dbg will print 0 but otherwise continue working. [ 0.251581] fsa4480 1-0042: Found FSA4480 v0.0 (Vendor ID = 0) Cc: stable@vger.kernel.org Fixes: e885f5f1f2b4 ("usb: typec: fsa4480: Check if the chip is really there") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240818-fsa4480-chipid-fix-v1-1-17c239435cf7@fairphone.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: xilinx: add missing depopulate in probe error pathKrzysztof Kozlowski
Depopulate device in probe error paths to fix leak of children resources. Fixes: 53b5ff83d893 ("usb: dwc3: xilinx: improve error handling for PM APIs") Cc: stable@vger.kernel.org Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240816075409.23080-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: omap: add missing depopulate in probe error pathKrzysztof Kozlowski
Depopulate device in probe error paths to fix leak of children resources. Fixes: ee249b455494 ("usb: dwc3: omap: remove IRQ_NOAUTOEN used with shared irq") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20240816075409.23080-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22dt-bindings: usb: microchip,usb2514: Fix reference USB device schemaAlexander Stein
An USB hub is not a HCD, but an USB device. Fix the referenced schema accordingly. Fixes: bfbf2e4b77e2 ("dt-bindings: usb: Document the Microchip USB2514 hub") Cc: stable@vger.kernel.org Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20240815113132.372542-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: gadget: uvc: queue pump work in uvcg_video_enable()Xu Yang
Since commit "6acba0345b68 usb:gadget:uvc Do not use worker thread to pump isoc usb requests", pump work could only be queued in uvc_video_complete() and uvc_v4l2_qbuf(). If VIDIOC_QBUF is executed before VIDIOC_STREAMON, we can only depend on uvc_video_complete() to queue pump work. However, this requires some free requests in req_ready list. If req_ready list is empty all the time, pump work will never be queued and video datas will never be pumped to usb controller. Actually, this situation could happen when run uvc-gadget with static image: $ ./uvc-gadget -i 1080p.jpg uvc.0 When capture image from this device, the user app will always block there. The issue is uvc driver has queued video buffer before streamon, but the req_ready list is empty all the time after streamon. This will queue pump work in uvcg_video_enable() to fill some request to req_ready list so the uvc device could work properly. Fixes: 6acba0345b68 ("usb:gadget:uvc Do not use worker thread to pump isoc usb requests") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20240814112537.2608949-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI ControllerIan Ray
USB_DEVICE(0x1901, 0x0006) may send data before cdc_acm is ready, which may be misinterpreted in the default N_TTY line discipline. Signed-off-by: Ian Ray <ian.ray@gehealthcare.com> Acked-by: Oliver Neuku <oneukum@suse.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20240814072905.2501-1-ian.ray@gehealthcare.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq functionPawel Laszczak
Patch fixes the incorrect "stream_id" table index instead of "ep_index" used in cdnsp_get_hw_deq function. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/PH7PR07MB95381F2182688811D5C711CEDD8D2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: core: Prevent USB core invalid event buffer address accessSelvarasu Ganesan
This commit addresses an issue where the USB core could access an invalid event buffer address during runtime suspend, potentially causing SMMU faults and other memory issues in Exynos platforms. The problem arises from the following sequence. 1. In dwc3_gadget_suspend, there is a chance of a timeout when moving the USB core to the halt state after clearing the run/stop bit by software. 2. In dwc3_core_exit, the event buffer is cleared regardless of the USB core's status, which may lead to an SMMU faults and other memory issues. if the USB core tries to access the event buffer address. To prevent this hardware quirk on Exynos platforms, this commit ensures that the event buffer address is not cleared by software when the USB core is active during runtime suspend by checking its status before clearing the buffer address. Cc: stable <stable@kernel.org> Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240815064836.1491-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3Marc Zyngier
On a system with a GICv3, if a guest hasn't been configured with GICv3 and that the host is not capable of GICv2 emulation, a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2. We therefore try to emulate the SGI access, only to hit a NULL pointer as no private interrupt is allocated (no GIC, remember?). The obvious fix is to give the guest what it deserves, in the shape of a UNDEF exception. Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240820100349.3544850-2-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-08-22MAINTAINERS: Mark UVC gadget driver as orphanLaurent Pinchart
I haven't had time to maintain the UVC gadget driver for a long while. Dan Scally confirmed he is also in a similar -ENOTIME situation with no short term hope of fixing that. Being listed as maintainers doesn't help progress, so mark the driver as orphan to reflect the current state. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Scally <dan.scally@ideasonboard.com> Link: https://lore.kernel.org/r/20240813104447.25821-1-laurent.pinchart@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_openSimon Arlott
The mcp251x_hw_wake() function is called with the mpc_lock mutex held and disables the interrupt handler so that no interrupts can be processed while waking the device. If an interrupt has already occurred then waiting for the interrupt handler to complete will deadlock because it will be trying to acquire the same mutex. CPU0 CPU1 ---- ---- mcp251x_open() mutex_lock(&priv->mcp_lock) request_threaded_irq() <interrupt> mcp251x_can_ist() mutex_lock(&priv->mcp_lock) mcp251x_hw_wake() disable_irq() <-- deadlock Use disable_irq_nosync() instead because the interrupt handler does everything while holding the mutex so it doesn't matter if it's still running. Fixes: 8ce8c0abcba3 ("can: mcp251x: only reset hardware as required") Signed-off-by: Simon Arlott <simon@octiron.net> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/4fc08687-1d80-43fe-9f0d-8ef8475e75f6@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpa Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-08-22Merge tag 'drm-misc-next-2024-08-16' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: Core Changes: ci: - Update dependencies docs: - Cleanups edid: - Improve debug logging - Clean up interface fbdev emulation: - Remove old fbdev hooks - Update documentation panic: - Cleanups Driver Changes: amdgpu: - Remove usage of old fbdev hooks - Use backlight constants ast: - Fix timeout loop for DP link training hisilicon: - hibmc: Cleanups mipi-dsi: - Improve error handling - startek-kd070fhfid015: Use new error handling nouveau: - Remove usage of old fbdev hooks panel: - Use backlight constants radeon: - Use backlight constants rockchip: - Improve DP sink-capability reporting - Cleanups - dw_hdmi: Support 4k@60Hz; Cleanups - vop: Support RGB display on Rockchip RK3066; Support 4096px width tilcdc: - Use backlight constants Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240816084109.GA229316@localhost.localdomain
2024-08-22KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling faultOliver Upton
Zenghui reports that VMs backed by hugetlb pages are no longer booting after commit fd276e71d1e7 ("KVM: arm64: nv: Handle shadow stage 2 page faults"). Support for shadow stage-2 MMUs introduced the concept of a fault IPA and canonical IPA to stage-2 fault handling. These are identical in the non-nested case, as the hardware stage-2 context is always that of the canonical IPA space. Both addresses need to be hugepage-aligned when preparing to install a hugepage mapping to ensure that KVM uses the correct GFN->PFN translation and installs that at the correct IPA for the current stage-2. And now I'm feeling thirsty after all this talk of IPAs... Fixes: fd276e71d1e7 ("KVM: arm64: nv: Handle shadow stage 2 page faults") Reported-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240822071710.2291690-1-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-08-22ALSA: hda/realtek - Fixed ALC256 headphone no soundKailang Yang
Dell platform, plug headphone or headset, it had a chance to get no sound from headphone. Replace depop procedure will solve this issue. Signed-off-by: Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/bb8e2de30d294dc287944efa0667685a@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-22drm/ast: Remove BMC outputThomas Zimmermann
Ast's BMC connector tracks the status of an underlying physical connector and updates the BMC status accordingly. This functionality works around GNOME's settings app, which cannot handle multiple outputs on the same CRTC. The workaround is now obsolete as all code for physical outputs handle BMC support internally. Hence, remove the driver's code and the BMC output entirely. v3: - remove struct ast_bmc_connector Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-12-tzimmermann@suse.de
2024-08-22drm/ast: vga: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-11-tzimmermann@suse.de
2024-08-22drm/ast: sil164: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-10-tzimmermann@suse.de
2024-08-22drm/ast: dp501: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-9-tzimmermann@suse.de
generated by cgit (git 2.34.1) at 2025-09-15 12:27:07 +0000