Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single fix for non-continous port map programming
* tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: fix programming slave ports for non-continous port maps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
|
|
When we cork messages in psock->cork, the last message triggers the
flushing will result in sending a sk_msg larger than the current
message size. In this case, in tcp_bpf_send_verdict(), 'copied' becomes
negative at least in the following case:
468 case __SK_DROP:
469 default:
470 sk_msg_free_partial(sk, msg, tosend);
471 sk_msg_apply_bytes(psock, tosend);
472 *copied -= (tosend + delta); // <==== HERE
473 return -EACCES;
Therefore, it could lead to the following BUG with a proper value of
'copied' (thanks to syzbot). We should not use negative 'copied' as a
return value here.
------------[ cut here ]------------
kernel BUG at net/socket.c:733!
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 UID: 0 PID: 3265 Comm: syz-executor510 Not tainted 6.11.0-rc3-syzkaller-00060-gd07b43284ab3 #0
Hardware name: linux,dummy-virt (DT)
pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : sock_sendmsg_nosec net/socket.c:733 [inline]
pc : sock_sendmsg_nosec net/socket.c:728 [inline]
pc : __sock_sendmsg+0x5c/0x60 net/socket.c:745
lr : sock_sendmsg_nosec net/socket.c:730 [inline]
lr : __sock_sendmsg+0x54/0x60 net/socket.c:745
sp : ffff800088ea3b30
x29: ffff800088ea3b30 x28: fbf00000062bc900 x27: 0000000000000000
x26: ffff800088ea3bc0 x25: ffff800088ea3bc0 x24: 0000000000000000
x23: f9f00000048dc000 x22: 0000000000000000 x21: ffff800088ea3d90
x20: f9f00000048dc000 x19: ffff800088ea3d90 x18: 0000000000000001
x17: 0000000000000000 x16: 0000000000000000 x15: 000000002002ffaf
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: ffff8000815849c0 x9 : ffff8000815b49c0
x8 : 0000000000000000 x7 : 000000000000003f x6 : 0000000000000000
x5 : 00000000000007e0 x4 : fff07ffffd239000 x3 : fbf00000062bc900
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 00000000fffffdef
Call trace:
sock_sendmsg_nosec net/socket.c:733 [inline]
__sock_sendmsg+0x5c/0x60 net/socket.c:745
____sys_sendmsg+0x274/0x2ac net/socket.c:2597
___sys_sendmsg+0xac/0x100 net/socket.c:2651
__sys_sendmsg+0x84/0xe0 net/socket.c:2680
__do_sys_sendmsg net/socket.c:2689 [inline]
__se_sys_sendmsg net/socket.c:2687 [inline]
__arm64_sys_sendmsg+0x24/0x30 net/socket.c:2687
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x48/0x110 arch/arm64/kernel/syscall.c:49
el0_svc_common.constprop.0+0x40/0xe0 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x1c/0x28 arch/arm64/kernel/syscall.c:151
el0_svc+0x34/0xec arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x100/0x12c arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x19c/0x1a0 arch/arm64/kernel/entry.S:598
Code: f9404463 d63f0060 3108441f 54fffe81 (d4210000)
---[ end trace 0000000000000000 ]---
Fixes: 4f738adba30a ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Reported-by: syzbot+58c03971700330ce14d8@syzkaller.appspotmail.com
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20240821030744.320934-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add imx mailing list imx@lists.linux.dev for PCI controller of NXP chips
(Layerscape and iMX).
Link: https://lore.kernel.org/r/20240826202740.970015-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
|
|
Sync with drm-xe-next so we can continue with display clean-up.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In adreno_request_fw() when debugging information is printed to the log
after firmware load, an incorrect filename is printed. 'newname' is used
instead of 'fwname', so prefix "qcom/" is being added to filename.
Looks like "copy-paste" mistake.
Fix this mistake by replacing 'newname' with 'fwname'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2c41ef1b6f7d ("drm/msm/adreno: deal with linux-firmware fw paths")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602382/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Make it match the MDSS settings for sc8180x and downstream.
Note that without the previous commit that exposes the value of
macrotile_mode to mesa, this will break mesa which expects the legacy
default value of 0. Therefore we do *not* want to backport it.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607398/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This adds extra parameters that affect UBWC tiling that will be used by
the Mesa implementation of VK_EXT_host_image_copy.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607401/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
According to downstream we should be setting RBBM_NC_MODE_CNTL to a
non-default value on a663 and a680, we don't support a663 and on a680
we're leaving it at the wrong (suboptimal) value. Just set it on all
GPUs. Similarly, plumb through level2_swizzling_dis which will be
necessary on a663.
ubwc_mode is expanded and renamed to ubwc_swizzle to match the name on
the display side. Similarly macrotile_mode should match the display
side.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607397/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Update to Mesa commit 36a13d2b3b0 ("freedreno: fix a7xx perfcntr
countables").
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607395/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This was missed because we weren't using the a750-specific indexed regs.
Fixes: f3f8207d8aed ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/607394/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This was missed thanks to the family mixup fixed in the previous commit.
Fixes: f3f8207d8aed ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607393/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
With a7xx, we need to import a new header for each new generation and
switch to a different list of registers, instead of making
backwards-compatible changes. Using the helpers inadvertently made a750
use the a740 list of registers, instead use the family directly to fix
this.
Fixes: f3f8207d8aed ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607392/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The Adreno A615 is used in SDM670. Add an entry to support it.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607238/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
According to downstream, A642L's speedbin is 129 and uses 4 as index
Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/606722/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This was added in commit ec446d09366c ("drm/msm: call
drm_atomic_helper_suspend() and drm_atomic_helper_resume()"), but unused
since commit ca8199f13498 ("drm/msm/dpu: ensure device suspend happens
during PM sleep") which switched to drm_mode_config_helper_suspend()/
drm_mode_config_helper_resume()..
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/607746/
|
|
The msm_atomic_state_clear() and msm_atomic_state_free() functions are
declared but never defined. Remove their prototypes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Patchwork: https://patchwork.freedesktop.org/patch/610618/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code.
No functional change intended.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/609596/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The pointer returned by btf_parse_base could be an error pointer.
IS_ERR() check is needed before calling btf_free(base_btf).
Fixes: 8646db238997 ("libbpf,bpf: Share BTF relocate-related code with kernel")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240830012214.1646005-1-martin.lau@linux.dev
|
|
io_provided_buffers_select() returns 0 to indicate success, but it should
be returning 1 to indicate that 1 vec was mapped. This causes peeking
to fail with classic provided buffers, and while that's not a use case
that anyone should use, it should still work correctly.
The end result is that no buffer will be selected, and hence a completion
with '0' as the result will be posted, without a buffer attached.
Fixes: 35c8711c8fc4 ("io_uring/kbuf: add helpers for getting/peeking multiple buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There's only one instance of hwmon per device, and MMIO access to it is
always done through the root tile. The code has been passing around a
pointer to the root tile's primary GT, which is confusing since this
isn't really a GT-level concept. Replace that pointer with an xe_device
pointer and use xe_root_mmio_gt(xe) to get a pointer when we need to do
register MMIO. This makes things easier to follow, and also cleans up
the code in preparation for a much larger MMIO register access overhaul
that's coming soon.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-6-matthew.d.roper@intel.com
|
|
There's only one instance of the pcode per tile, and for GT-related
accesses both the primary and media GT share the same register
interface. Since Xe was using per-GT locking, the pcode mutex wasn't
actually protecting everything that it should since concurrent accesses
related to a tile's primary GT and media GT were possible.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-5-matthew.d.roper@intel.com
|
|
None of the Xe display files work directly with the GT or need anything
from xe_gt.h. Drop the unnecessary include.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829230307.886233-2-matthew.d.roper@intel.com
|
|
It is not safe to dereference fl->c.flc_owner without first confirming
fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict()
tests fl_lmops but largely ignores the result and assumes that flc_owner
is an nfs4_delegation anyway. This is wrong.
With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave
as it did before the change mentioned below. This is the same as the
current code, but without any reference to a possible delegation.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When adding devm_regulator_bulk_get_const() I missed adding a stub for
when CONFIG_REGULATOR is not enabled. Under certain conditions (like
randconfig testing) this can cause the compiler to reports errors
like:
error: implicit declaration of function 'devm_regulator_bulk_get_const';
did you mean 'devm_regulator_bulk_get_enable'?
Add the stub.
Fixes: 1de452a0edda ("regulator: core: Allow drivers to define their init data as const")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408301813.TesFuSbh-lkp@intel.com/
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20240830073511.1.Ib733229a8a19fad8179213c05e1af01b51e42328@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For buffer registration (or updates), a userspace iovec is copied in
and updated. If the application is within a compat syscall, then the
iovec type is compat_iovec rather than iovec. However, the type used
in __io_sqe_buffers_update() and io_sqe_buffers_register() is always
struct iovec, and hence the source is incremented by the size of a
non-compat iovec in the loop. This misses every other iovec in the
source, and will run into garbage half way through the copies and
return -EFAULT to the application.
Maintain the source address separately and assign to our user vec
pointer, so that copies always happen from the right source address.
While in there, correct a bad placement of __user which triggered
the following sparse warning prior to this fix:
io_uring/rsrc.c:981:33: warning: cast removes address space '__user' of expression
io_uring/rsrc.c:981:30: warning: incorrect type in assignment (different address spaces)
io_uring/rsrc.c:981:30: expected struct iovec const [noderef] __user *uvec
io_uring/rsrc.c:981:30: got struct iovec *[noderef] __user
Fixes: f4eaf8eda89e ("io_uring/rsrc: Drop io_copy_iov in favor of iovec API")
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device id for 6.11-rc6
Here's a new modem device id.
This one has been in linux-next with no reported issues.
* tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add MeiG Smart SRM825L
|
|
Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
rather than truncate_inode_pages_range(). The latter clears the
invalidated bit of a partial pages rather than discarding it entirely.
This causes copy_file_range() to fail on cifs because the partial pages at
either end of the destination range aren't evicted and reread, but rather
just partly cleared.
This causes generic/075 and generic/112 xfstests to fail.
Fixes: 74e797d79cf1 ("mm: Provide a means of invalidation without using launder_folio")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240828210249.1078637-5-dhowells@redhat.com
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: devel@lists.orangefs.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
sm8250 and sc7280 have lpass codec version 1.0, as these are very old
platforms, they do not have a reliable way to get the codec version
from core_id registers.
On codec versions below 2.0, even though the core_id registers are
available to read, the values of these registers are not unique to be
able to determine the version of the codec dynamically.
Add the version info into of_data, so that driver does not need to use
core_id registers to get version number for such situations.
Fixes: 378918d59181 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20240816091210.50172-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We use komeda_crtc_normalize_zpos to normalize zpos of affected planes
to their blending zorder in CU. If there's only one slave plane in
affected planes and its layer_split property is enabled, order++ for
its split layer, so that when calculating the normalized_zpos
of master planes, the split layer of the slave plane is included, but
the max_slave_zorder does not include the split layer and keep zero
because there's only one slave plane in affacted planes, although we
actually use two slave layers in this commit.
In most cases, this bug does not result in a commit failure, but assume
the following situation:
slave_layer 0: zpos = 0, layer split enabled, normalized_zpos =
0;(use slave_layer 2 as its split layer)
master_layer 0: zpos = 2, layer_split enabled, normalized_zpos =
2;(use master_layer 2 as its split layer)
master_layer 1: zpos = 4, normalized_zpos = 4;
master_layer 3: zpos = 5, normalized_zpos = 5;
kcrtc_st->max_slave_zorder = 0;
When we use master_layer 3 as a input of CU in function
komeda_compiz_set_input and check it with function
komeda_component_check_input, the parameter idx is equal to
normailzed_zpos minus max_slave_zorder, the value of idx is 5
and is euqal to CU's max_active_inputs, so that
komeda_component_check_input returns a -EINVAL value.
To fix the bug described above, when calculating the max_slave_zorder
with the layer_split enabled, count the split layer in this calculation
directly.
Signed-off-by: hongchi.peng <hongchi.peng@siengine.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826024517.3739-1-hongchi.peng@siengine.com
|
|
Since smc_inet6_prot does not initialize ipv6_pinfo_offset, inet6_create()
copies an incorrect address value, sk + 0 (offset), to inet_sk(sk)->pinet6.
In addition, since inet_sk(sk)->pinet6 and smc_sk(sk)->clcsock practically
point to the same address, when smc_create_clcsk() stores the newly
created clcsock in smc_sk(sk)->clcsock, inet_sk(sk)->pinet6 is corrupted
into clcsock. This causes NULL pointer dereference and various other
memory corruptions.
To solve this problem, you need to initialize ipv6_pinfo_offset, add a
smc6_sock structure, and then add ipv6_pinfo as the second member of
the smc_sock structure.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add power domain binding to the mediatek DPI controller
for MT8186.
Also, add power domain binding for other SoCs like
MT6795 and MT8173 that already had power domain property.
Signed-off-by: Rohit Agarwal <rohiagar@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240830084544.2898512-2-rohiagar@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
intel_spi_populate_chip() use devm_kasprintf() to set pdata->name.
This can return a NULL pointer on failure but this returned value
is not checked.
Fixes: e58db3bcd93b ("spi: intel: Add default partition and name to the second chip")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20240830074106.8744-1-hanchunchao@inspur.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case of error in build_tokens_sysfs(), all the memory that has been
allocated is freed at end of this function. But then free_group() is
called which performs memory deallocation again.
Also, instead of free_group() call, there should be exit_dell_smbios_smm()
and exit_dell_smbios_wmi() calls, since there is initialization, but there
is no release of resources in case of an error.
Fix these issues by replacing free_group() call with
exit_dell_smbios_wmi() and exit_dell_smbios_smm().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 33b9ca1e53b4 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240830065428.9544-1-amishin@t-argos.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Simplify memory unwinding on error also fixing current memory
leak that can happen on error.
v2: use devm_kcalloc(Matt A)
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826162035.20462-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
Our initial VF control implementation was focused on providing
a very minimal support for the VF_STATE_NOTIFY events just to
meet GuC requirements, without tracking a VF state or doing any
expected actions (like cleanup in case of the FLR notification).
Try to improve this by defining set of VF state machines, each
responsible for processing one activity (PAUSE, RESUME, STOP or
FLR). All required steps defined by the VF state machine are then
executed by the PF worker from the dedicated workqueue.
Any external requests or notifications simply try to transition
between the states to trigger a work and then wait for that work
to finish. Some predefined default timeouts are used to avoid
changing existing API calls, but it should be easy to extend the
control API to also accept specific timeout values.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-5-michal.wajdeczko@intel.com
|
|
It is unlikely that GuC will ever send a G2H notification with an
invalid VFID and it is currently harmless if that actually happen.
But in upcoming patches we will start using that VFID as an index
and we must be sure it is a valid to avoid a crash due to a buggy
firmware or a currupted G2H message.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-4-michal.wajdeczko@intel.com
|
|
Current formatting of "The VF FLR Flow with GuC" only looks fine,
but it will not render properly when included in htmldocs due to:
WARNING: Block quote ends without a blank line; unexpected unindent.
CRITICAL: Missing matching underline for section title overline.
Fix that by adding proper indent and using list markup.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-3-michal.wajdeczko@intel.com
|
|
On current platforms it is a PF driver responsibility to clear
some of the VF's resources during a VF FLR. Add simple function
that will clear configured VF resources (GGTT, LMEM). We will
start using this function soon.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-2-michal.wajdeczko@intel.com
|
|
Add HDMI codec ID for Intel Panther Lake platform.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240830072458.110831-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Lenovo V145 is having phase inverted dmic but simply applying inverted
dmic fixups does not work. Chaining up verb fixes for ALC283 enables
inverting dmic fixup to work properly.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240830-lenovo-v145-fixes-v3-1-f7b7265068fa@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-driver (xe-core) Changes:
- Require BMG scanout buffers to be 64k physically aligned (Maarten)
Core (drm) Changes:
- Introducing Xe2 ccs modifiers for integrated and discrete graphics (Juha-Pekka)
Driver Changes:
- General cleanup and more work moving towards intel_display isolation (Jani)
- New display workaround (Suraj)
- Use correct cp_irq_count on HDCP (Suraj)
- eDP PSR fix when CRC is enabled (Jouni)
- Fix DP MST state after a sink reset (Imre)
- Fix Arrow Lake GSC firmware version (John)
- Use chained DSBs for LUT programming (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtCC0lJ0Zf3MoSdW@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Fix OA format masks which were breaking build with gcc-5
Cross-subsystem Changes:
Driver Changes:
- Use dma_fence_chain_free in chain fence unused as a sync (Matthew Brost)
- Refactor hw engine lookup and mmio access to be used in more places
(Dominik, Matt Auld, Mika Kuoppala)
- Enable priority mem read for Xe2 and later (Pallavi Mishra)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Fix refcount and speedup devcoredump (Matthew Brost)
- Add performance tuning changes to Xe2 (Akshata, Shekhar)
- Fix OA sysfs entry (Ashutosh)
- Add first GuC firmware support for BMG (Julia)
- Bump minimum GuC firmware for platforms under force_probe to match LNL
and BMG (Julia)
- Fix access check on user fence creation (Nirmoy)
- Add/document workarounds for Xe2 (Julia, Daniele, John, Tejas)
- Document workaround and use proper WA infra (Matt Roper)
- Fix VF configuration on media GT (Michal Wajdeczko)
- Fix VM dma-resv lock (Matthew Brost)
- Allow suspend/resume exec queue backend op to be called multiple times
(Matthew Brost)
- Add GT stats to debugfs (Nirmoy)
- Add hwconfig to debugfs (Matt Roper)
- Compile out all debugfs code with ONFIG_DEUBG_FS=n (Lucas)
- Remove dead kunit code (Jani Nikula)
- Refactor drvdata storing to help display (Jani Nikula)
- Cleanup unsused xe parameter in pte handling (Himal)
- Rename s/enable_display/probe_display/ for clarity (Lucas)
- Fix missing MCR annotation in couple of registers (Tejas)
- Fix DGFX display suspend/resume (Maarten)
- Prepare exec_queue_kill for PXP handling (Daniele)
- Fix devm/drmm issues (Daniele, Matthew Brost)
- Fix tile and ggtt fini sequences (Matthew Brost)
- Fix crashes when probing without firmware in place (Daniele, Matthew Brost)
- Use xe_managed for kernel BOs (Daniele, Matthew Brost)
- Future-proof dss_per_group calculation by using hwconfig (Matt Roper)
- Use reserved copy engine for user binds on faulting devices
(Matthew Brost)
- Allow mixing dma-fence jobs and long-running faulting jobs (Francois)
- Cleanup redundant arg when creating use BO (Nirmoy)
- Prevent UAF around preempt fence (Auld)
- Fix display suspend/resume (Maarten)
- Use vma_pages() helper (Thorsten)
- Calculate pagefault queue size (Stuart, Matthew Auld)
- Fix missing pagefault wq destroy (Stuart)
- Fix lifetime handling of HW fence ctx (Matthew Brost)
- Fix order destroy order for jobs (Matthew Brost)
- Fix TLB invalidation for media GT (Matthew Brost)
- Document GGTT (Rodrigo Vivi)
- Refactor GGTT layering and fix runtime outer protection (Rodrigo Vivi)
- Handle HPD polling on display pm runtime suspend/resume (Imre, Vinod)
- Drop unrequired NULL checks (Apoorva, Himal)
- Use separate rpm lockdep map for non-d3cold-capable devices (Thomas Hellström)
- Support "nomodeset" kernel command-line option (Thomas Zimmermann)
- Drop force_probe requirement for LNL and BMG (Lucas, Balasubramani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/wd42jsh4i3q5zlrmi2cljejohdsrqc6hvtxf76lbxsp3ibrgmz@y54fa7wwxgsd
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
devfs:
- support device numbers up to MINORBITS limit
Core Changes:
ci:
- increase job timeout
devfs:
- use XArray for minor ids
displayport:
- mst: GUID improvements
docs:
- add fixes and cleanups
panic:
- optionally display QR code
Driver Changes:
amdgpu:
- faster vblank disabling
- GUID improvements
gm12u320
- convert to struct drm_edid
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp: add support for BOE NE140WUM-N6G; revert support for
SDC ATNA45AF01
- visionox-vtdr6130: improve error handling; use
devm_regulator_bulk_get_const()
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
sti:
- convert to struct drm_edid
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829144654.GA145538@linux.fritz.box
|
|
Pull drm fixes from Dave Airlie:
"Another week, another set of GPU fixes. amdgpu and vmwgfx leading the
charge, then i915 and xe changes along with v3d and some other bits.
The TTM revert is due to some stuttering graphical apps probably due
to longer stalls while prefaulting.
Seems pretty much where I'd expect things,
ttm:
- revert prefault change, caused stutters
aperture:
- handle non-VGA devices bettter
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
i915:
- Fix #11195: The external display connect via USB type-C dock stays
blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
- Move ARL GuC firmware to correct version
xe:
- Invalidate media_gt TLBs
- Fix HWMON i1 power setup write command
vmwgfx:
- prevent unmapping active read buffers
- fix prime with external buffers
- disable coherent dumb buffers without 3d
v3d:
- disable preemption while updating GPU stats"
* tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16
drm/v3d: Disable preemption while updating GPU stats
drm/amd/pm: Drop unsupported features on smu v14_0_2
drm/amd/pm: Add support for new P2S table revision
drm/amdgpu: support for gc_info table v1.3
drm/amd/display: avoid using null object of framebuffer
drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDs
drm/amd/pm: update message interface for smu v14.0.2/3
drm/amdgpu/swsmu: always force a state reprogram on init
drm/amdgpu/smu13.0.7: print index for profiles
drm/amdgpu: align pp_power_profile_mode with kernel docs
drm/i915/dp_mst: Fix MST state after a sink reset
drm/xe: Invalidate media_gt TLBs
drm/i915: ARL requires a newer GSC firmware
drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
video/aperture: optionally match the device in sysfb_disable()
drm/vmwgfx: Disable coherent dumb buffers without 3d
drm/vmwgfx: Fix prime with external buffers
drm/vmwgfx: Prevent unmapping active read buffers
Revert "drm/ttm: increase ttm pre-fault value to PMD size"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-28 (igb, ice)
This series contains updates to igb and ice drivers.
Daiwei Li restores writing the TSICR (TimeSync Interrupt Cause)
register on 82850 devices to workaround a hardware issue for igb.
Dawid detaches netdev device for reset to avoid ethtool accesses during
reset causing NULL pointer dereferences on ice.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Add netif_device_attach/detach into PF reset flow
igb: Fix not clearing TimeSync interrupts for 82580
====================
Link: https://patch.msgid.link/20240828225444.645154-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unlock before returning an error code if this allocation fails.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Steve French reported null pointer dereference error from sha256 lib.
cifs.ko can send session setup requests on reused connection.
If reused connection is used for binding session, conn->binding can
still remain true and generate_preauth_hash() will not set
sess->Preauth_HashValue and it will be NULL.
It is used as a material to create an encryption key in
ksmbd_gen_smb311_encryptionkey. ->Preauth_HashValue cause null pointer
dereference error from crypto_shash_update().
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 8 PID: 429254 Comm: kworker/8:39
Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET69W (1.52 )
Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
RIP: 0010:lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3]
<TASK>
? show_regs+0x6d/0x80
? __die+0x24/0x80
? page_fault_oops+0x99/0x1b0
? do_user_addr_fault+0x2ee/0x6b0
? exc_page_fault+0x83/0x1b0
? asm_exc_page_fault+0x27/0x30
? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3]
? lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3]
? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3]
? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3]
_sha256_update+0x77/0xa0 [sha256_ssse3]
sha256_avx2_update+0x15/0x30 [sha256_ssse3]
crypto_shash_update+0x1e/0x40
hmac_update+0x12/0x20
crypto_shash_update+0x1e/0x40
generate_key+0x234/0x380 [ksmbd]
generate_smb3encryptionkey+0x40/0x1c0 [ksmbd]
ksmbd_gen_smb311_encryptionkey+0x72/0xa0 [ksmbd]
ntlm_authenticate.isra.0+0x423/0x5d0 [ksmbd]
smb2_sess_setup+0x952/0xaa0 [ksmbd]
__process_request+0xa3/0x1d0 [ksmbd]
__handle_ksmbd_work+0x1c4/0x2f0 [ksmbd]
handle_ksmbd_work+0x2d/0xa0 [ksmbd]
process_one_work+0x16c/0x350
worker_thread+0x306/0x440
? __pfx_worker_thread+0x10/0x10
kthread+0xef/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x44/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Fixes: f5a544e3bab7 ("ksmbd: add support for SMB3 multichannel")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add the __counted_by compiler attribute to the flexible array member
entries to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
|