summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-29drm/i915/dsb: Introduce intel_dsb_chain()Ville Syrjälä
In order to handle the DEwake tricks without involving the CPU we need a mechanism by which one DSB can start another one. Add a basic function to do so. We'll extend it later with additional code to actually deal with DEwake. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-11-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Introduce intel_dsb_wait_scanline_{in,out}()Ville Syrjälä
Add functions to emit a DSB scanline window wait instructions. We can either wait for the scanline to be IN the window or OUT of the window. The hardware doesn't handle wraparound so we must manually deal with it by swapping the IN range to the inverse OUT range, or vice versa. Also add a bit of paranoia to catch the edge case of waiting for the entire frame. That doesn't make sense since an IN wait would be a nop, and an OUT wait would imply waiting forever. Most of the time this also results in both scanline ranges (original and inverted) to have lower=upper+1 which is nonsense from the hw POV. For now we are only handling the case where the scanline wait happens prior to latching the double buffered registers during the commit (which might change the timings due to LRR/VRR/etc.) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-10-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Precompute DSB_CHICKENVille Syrjälä
Adjust the code that determines the correct DSB_CHICKEN value to be usable for use within DSB commands themselves. Ie. precompute it based on our knowledge of what the hardware state (VRR vs. not mainly) will be at the time of the commit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-9-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Account for VRR properly in DSB scanline stuffVille Syrjälä
When determining various scanlines for DSB use we should take into account whether VRR is active at the time when the DSB uses said scanline information. For now all DSB scanline usage occurs prior to the actual commit, so we only need to care about the state of VRR at that time. I've decided to move intel_crtc_scanline_to_hw() in its entirety to the DSB code as it will also need to know the actual state of VRR in order to do its job 100% correctly. TODO: figure out how much of this could be moved to some more generic place and perhaps be shared with the CPU vblank evasion code/etc... Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-8-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Fix dewake scanlineVille Syrjälä
Currently we calculate the DEwake scanline based on the delayed vblank start, while in reality it should be computed based on the undelayed vblank start (as that is where the DSB actually starts). Currently it doesn't really matter as we don't have any vblank delay configured, but that may change in the future so let's be accurate in what we do. We can also remove the max() as intel_crtc_scanline_to_hw() can deal with negative numbers, which there really shouldn't be anyway. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-7-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Shuffle code aroundVille Syrjälä
Relocate intel_dsb_dewake_scanline() and dsb_chicken() upwards in the file. I need to reuse these while emitting DSB commands, and I'd like to keep the DSB command emission stuff more or less grouped together in the file. Also drop the intel_ prefix from intel_dsb_dewake_scanline() since it's all internal stuff and thus doesn't need so much namespacing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-6-ville.syrjala@linux.intel.com Reviewed-by: Animesh manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Convert dewake_scanline to a hw scanline number earlierVille Syrjälä
Currently we switch from out software idea of a scanline to the hw's idea of a scanline during the commit phase in _intel_dsb_commit(). While that is slightly easier due to fastsets fiddling with the timings, we'll also need to generate proper hw scanline numbers already when emitting DSB scanline wait instructions. So this approach won't do in the future. Switch to hw scanline numbers earlier. Also intel_dsb_dewake_scanline() itself already makes some assumptions about VRR that don't take into account VRR toggling during fastsets, so technically delaying the sw->hw conversion doesn't even help us. The other reason for delaying the conversion was that we are using intel_get_crtc_scanline() during intel_dsb_commit() which gives us the current sw scanline. But this is pretty low level stuff anyway so just using raw PIPEDSL reads seems fine here, and that of course gives us the hw scanline directly, reducing the need to do so many conversions. v2: Return the non-hw scanline from intel_dsb_dewake_scanline() Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-5-ville.syrjala@linux.intel.com
2024-08-29drm/i915/dsb: Hook up DSB error interruptsVille Syrjälä
Enable all DSB error/fault interrupts so that we can see if anything goes terribly wrong. v2: Pass intel_display to DISPLAY_VER() (Jani) Drop extra '/' from drm_err() for consistency v3: Reorder the irq handler a bit Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625135852.13431-1-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/tiny/gm12u320: convert to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for allocating the EDID and updating the connector. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/c31c3afa883a3321345608c480c26161b638a83e.1724348429.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/ipuv3/parallel: convert to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for storing the EDID and updating the connector. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a1698044d556072e79041d69b8702099fd17bd90.1724348429.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/tegra: convert to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for reading the EDID and updating the connector. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/e764b50f4ad2de95e449ccb37f49c3f37b3333fc.1724348429.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/sti/sti_hdmi: convert to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for reading the EDID and updating the connector. The functional change is that the CEC physical address gets invalidated when the EDID could not be read. v2: Use drm_edid_read() instead of drm_edid_read_ddc() (Sima) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/25879a0183e30792bf0d63bdf56a03f11018e4a3.1724348429.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/i915: Fix readout degamma_lut mismatch on ilk/snbVille Syrjälä
On ilk/snb the pipe may be configured to place the LUT before or after the CSC depending on various factors, but as there is only one LUT (no split mode like on IVB+) we only advertise a gamma_lut and no degamma_lut in the uapi to avoid confusing userspace. This can cause a problem during readout if the VBIOS/GOP enabled the LUT in the pre CSC configuration. The current code blindly assigns the results of the readout to the degamma_lut, which will cause a failure during the next atomic_check() as we aren't expecting anything to be in degamma_lut since it's not visible to userspace. Fix the problem by assigning whatever LUT we read out from the hardware into gamma_lut. Cc: stable@vger.kernel.org Fixes: d2559299d339 ("drm/i915: Make ilk_read_luts() capable of degamma readout") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2024-08-29drm/panel: nv3051d: Transition to mipi_dsi_dcs_write_seq_multiAbhishek Tamboli
Replace deprecated 'mipi_dsi_dcs_write_seq()' macro to 'mipi_dsi_dcs_write_seq_multi' macro in panel_nv3051d_init_sequence function. Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240827152504.30586-1-abhishektamboli9@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240827152504.30586-1-abhishektamboli9@gmail.com
2024-08-29drm/panel: novatek-nt35950: transition to mipi_dsi wrapped functionsTejas Vipin
Changes the novatek-nt35950 panel to use multi style functions for improved error handling. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828182210.565861-1-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828182210.565861-1-tejasvipin76@gmail.com
2024-08-29drm/panel: visionox-vtdr6130: switch to devm_regulator_bulk_get_constNeil Armstrong
Switch to devm_regulator_bulk_get_const() to stop setting the supplies list in probe(), and move the regulator_bulk_data struct in static const. Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org
2024-08-29drm/panel: visionox-vtdr6130: switch to mipi_dsi wrapped functionsNeil Armstrong
Make usage of the new _multi() mipi_dsi functions instead of the deprecated macros, improving error handling and printing. bloat-o-meter gives a 12% gain on arm64: Function old new delta visionox_vtdr6130_unprepare 208 204 -4 visionox_vtdr6130_prepare 1192 896 -296 Total: Before=2348, After=2048, chg -12.78% Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org
2024-08-29nfc: pn533: Add poll mod list filling checkAleksandr Mishin
In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29fuse: disable the combination of passthrough and writeback cacheBernd Schubert
Current design and handling of passthrough is without fuse caching and with that FUSE_WRITEBACK_CACHE is conflicting. Fixes: 7dc4e97a4f9a ("fuse: introduce FUSE_PASSTHROUGH capability") Cc: stable@kernel.org # v6.9 Signed-off-by: Bernd Schubert <bschubert@ddn.com> Acked-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-08-29Merge tag 'nf-24-08-28' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes payload from netdev/egress by subtracting skb_network_offset() when validating IPv4 packet length, otherwise 'meta l4proto udp' never matches. Patch #2 subtracts skb_network_offset() when validating IPv6 packet length for netdev/egress. netfilter pull request 24-08-28 * tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation netfilter: nf_tables: restore IP sanity checks for netdev/egress ==================== Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mailmap: update entry for Sriram YagnaramanSriram Yagnaraman
Link my old est.tech address to my active mail address Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://patch.msgid.link/20240828072417.4111996-1-sriram.yagnaraman@ericsson.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29Merge branch 'mptcp-more-fixes-for-the-in-kernel-pm'Paolo Abeni
Matthieu Baerts says: ==================== mptcp: more fixes for the in-kernel PM Here is a new batch of fixes for the MPTCP in-kernel path-manager: Patch 1 ensures the address ID is set to 0 when the path-manager sends an ADD_ADDR for the address of the initial subflow. The same fix is applied when a new subflow is created re-using this special address. A fix for v6.0. Patch 2 is similar, but for the case where an endpoint is removed: if this endpoint was used for the initial address, it is important to send a RM_ADDR with this ID set to 0, and look for existing subflows with the ID set to 0. A fix for v6.0 as well. Patch 3 validates the two previous patches. Patch 4 makes the PM selecting an "active" path to send an address notification in an ACK, instead of taking the first path in the list. A fix for v5.11. Patch 5 fixes skipping the establishment of a new subflow if a previous subflow using the same pair of addresses is being closed. A fix for v5.13. Patch 6 resets the ID linked to the initial subflow when the linked endpoint is re-added, possibly with a different ID. A fix for v6.0. Patch 7 validates the three previous patches. Patch 8 is a small fix for the MPTCP Join selftest, when being used with older subflows not supporting all MIB counters. A fix for a commit introduced in v6.4, but backported up to v5.10. Patch 9 avoids the PM to try to close the initial subflow multiple times, and increment counters while nothing happened. A fix for v5.10. Patch 10 stops incrementing local_addr_used and add_addr_accepted counters when dealing with the address ID 0, because these counters are not taking into account the initial subflow, and are then not decremented when the linked addresses are removed. A fix for v6.0. Patch 11 validates the previous patch. Patch 12 avoids the PM to send multiple SUB_CLOSED events for the initial subflow. A fix for v5.12. Patch 13 validates the previous patch. Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it in order to re-create the initial subflow if it has been closed, even if the limit for *new* addresses -- not taking into account the address of the initial subflow -- has been reached. A fix for v5.10. Patch 15 validates the previous patch. Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> --- Matthieu Baerts (NGI0) (15): mptcp: pm: reuse ID 0 after delete and re-add mptcp: pm: fix RM_ADDR ID for the initial subflow selftests: mptcp: join: check removing ID 0 endpoint mptcp: pm: send ACK on an active subflow mptcp: pm: skip connecting to already established sf mptcp: pm: reset MPC endp ID when re-added selftests: mptcp: join: check re-adding init endp with != id selftests: mptcp: join: no extra msg if no counter mptcp: pm: do not remove already closed subflows mptcp: pm: fix ID 0 endp usage after multiple re-creations selftests: mptcp: join: check re-re-adding ID 0 endp mptcp: avoid duplicated SUB_CLOSED events selftests: mptcp: join: validate event numbers mptcp: pm: ADD_ADDR 0 is not a new address selftests: mptcp: join: check re-re-adding ID 0 signal net/mptcp/pm.c | 4 +- net/mptcp/pm_netlink.c | 87 ++++++++++---- net/mptcp/protocol.c | 6 + net/mptcp/protocol.h | 5 +- tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++---- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 + 6 files changed, 209 insertions(+), 50 deletions(-) --- base-commit: 3a0504d54b3b57f0d7bf3d9184a00c9f8887f6d7 change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817 Best regards, ==================== Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: check re-re-adding ID 0 signalMatthieu Baerts (NGI0)
This test extends "delete re-add signal" to validate the previous commit: when the 'signal' endpoint linked to the initial subflow (ID 0) is re-added multiple times, it will re-send the ADD_ADDR with id 0. The client should still be able to re-create this subflow, even if the add_addr_accepted limit has been reached as this special address is not considered as a new address. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: ADD_ADDR 0 is not a new addressMatthieu Baerts (NGI0)
The ADD_ADDR 0 with the address from the initial subflow should not be considered as a new address: this is not something new. If the host receives it, it simply means that the address is available again. When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider it as new by not incrementing the 'add_addr_accepted' counter. But the 'accept_addr' might not be set if the limit has already been reached: this can be bypassed in this case. But before, it is important to check that this ADD_ADDR for the ID 0 is for the same address as the initial subflow. If not, it is not something that should happen, and the ADD_ADDR can be ignored. Note that if an ADD_ADDR is received while there is already a subflow opened using the same address, this ADD_ADDR is ignored as well. It means that if multiple ADD_ADDR for ID 0 are received, there will not be any duplicated subflows created by the client. Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: validate event numbersMatthieu Baerts (NGI0)
This test extends "delete and re-add" and "delete re-add signal" to validate the previous commit: the number of MPTCP events are checked to make sure there are no duplicated or unexpected ones. A new helper has been introduced to easily check these events. The missing events have been added to the lib. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b911c97c7dc7 ("mptcp: add netlink event support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: avoid duplicated SUB_CLOSED eventsMatthieu Baerts (NGI0)
The initial subflow might have already been closed, but still in the connection list. When the worker is instructed to close the subflows that have been marked as closed, it might then try to close the initial subflow again. A consequence of that is that the SUB_CLOSED event can be seen twice: # ip mptcp endpoint 1.1.1.1 id 1 subflow dev eth0 2.2.2.2 id 2 subflow dev eth1 # ip mptcp monitor & [ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9 # ip mptcp endpoint delete id 1 [ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the second one from __mptcp_close_subflow(). To avoid doing the post-closed processing twice, the subflow is now marked as closed the first time. Note that it is not enough to check if we are dealing with the first subflow and check its sk_state: the subflow might have been reset or closed before calling mptcp_close_ssk(). Fixes: b911c97c7dc7 ("mptcp: add netlink event support") Cc: stable@vger.kernel.org Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: check re-re-adding ID 0 endpMatthieu Baerts (NGI0)
This test extends "delete and re-add" to validate the previous commit: when the endpoint linked to the initial subflow (ID 0) is re-added multiple times, it was no longer being used, because the internal linked counters are not decremented for this special endpoint: it is not an additional endpoint. Here, the "del/add id 0" steps are done 3 times to unsure this case is validated. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: fix ID 0 endp usage after multiple re-creationsMatthieu Baerts (NGI0)
'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once. Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512 Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com Cc: stable@vger.kernel.org Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: do not remove already closed subflowsMatthieu Baerts (NGI0)
It is possible to have in the list already closed subflows, e.g. the initial subflow has been already closed, but still in the list. No need to try to close it again, and increments the related counters again. Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: no extra msg if no counterMatthieu Baerts (NGI0)
The checksum and fail counters might not be available. Then no need to display an extra message with missing info. While at it, fix the indentation around, which is wrong since the same commit. Fixes: 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: check re-adding init endp with != idMatthieu Baerts (NGI0)
The initial subflow has a special local ID: 0. It is specific per connection. When a global endpoint is deleted and re-added later, it can have a different ID, but the kernel should still use the ID 0 if it corresponds to the initial address. This test validates this behaviour: the endpoint linked to the initial subflow is removed, and re-added with a different ID. Note that removing the initial subflow will not decrement the 'subflows' counters, which corresponds to the *additional* subflows. On the other hand, when the same endpoint is re-added, it will increment this counter, as it will be seen as an additional subflow this time. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: reset MPC endp ID when re-addedMatthieu Baerts (NGI0)
The initial subflow has a special local ID: 0. It is specific per connection. When a global endpoint is deleted and re-added later, it can have a different ID -- most services managing the endpoints automatically don't force the ID to be the same as before. It is then important to track these modifications to be consistent with the ID being used for the address used by the initial subflow, not to confuse the other peer or to send the ID 0 for the wrong address. Now when removing an endpoint, msk->mpc_endpoint_id is reset if it corresponds to this endpoint. When adding a new endpoint, the same variable is updated if the address match the one of the initial subflow. Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: skip connecting to already established sfMatthieu Baerts (NGI0)
The lookup_subflow_by_daddr() helper checks if there is already a subflow connected to this address. But there could be a subflow that is closing, but taking time due to some reasons: latency, losses, data to process, etc. If an ADD_ADDR is received while the endpoint is being closed, it is better to try connecting to it, instead of rejecting it: the peer which has sent the ADD_ADDR will not be notified that the ADD_ADDR has been rejected for this reason, and the expected subflow will not be created at the end. This helper should then only look for subflows that are established, or going to be, but not the ones being closed. Fixes: d84ad04941c3 ("mptcp: skip connecting the connected address") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: send ACK on an active subflowMatthieu Baerts (NGI0)
Taking the first one on the list doesn't work in some cases, e.g. if the initial subflow is being removed. Pick another one instead of not sending anything. Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: check removing ID 0 endpointMatthieu Baerts (NGI0)
Removing the endpoint linked to the initial subflow should trigger a RM_ADDR for the right ID, and the removal of the subflow. That's what is now being verified in the "delete and re-add" test. Note that removing the initial subflow will not decrement the 'subflows' counters, which corresponds to the *additional* subflows. On the other hand, when the same endpoint is re-added, it will increment this counter, as it will be seen as an additional subflow this time. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: fix RM_ADDR ID for the initial subflowMatthieu Baerts (NGI0)
The initial subflow has a special local ID: 0. When an endpoint is being deleted, it is then important to check if its address is not linked to the initial subflow to send the right ID. If there was an endpoint linked to the initial subflow, msk's mpc_endpoint_id field will be set. We can then use this info when an endpoint is being removed to see if it is linked to the initial subflow. So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(), it is no longer needed to use mptcp_local_id_match(). Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: reuse ID 0 after delete and re-addMatthieu Baerts (NGI0)
When the endpoint used by the initial subflow is removed and re-added later, the PM has to force the ID 0, it is a special case imposed by the MPTCP specs. Note that the endpoint should then need to be re-added reusing the same ID. Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29drm/amd/display: switch to guid_gen() to generate valid GUIDsJani Nikula
Instead of just smashing jiffies into a GUID, use guid_gen() to generate RFC 4122 compliant GUIDs. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-3-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/mst: switch to guid_gen() to generate valid GUIDsJani Nikula
Instead of just smashing jiffies into a GUID, use guid_gen() to generate RFC 4122 compliant GUIDs. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-2-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/mst: switch to guid_t type for GUIDJani Nikula
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid any functional changes here. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29Merge tag 'amd-drm-fixes-6.11-2024-08-28' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.11-2024-08-28: amdgpu: - SWSMU gaming stability fix - SMU 13.0.7 fix - SWSMU documentation alignment fix - SMU 14.0.x fixes - GC 12.x fix - Display fix - IP discovery fix - SMU 13.0.6 fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240828184908.125387-1-alexander.deucher@amd.com
2024-08-29powerpc/qspinlock: Fix deadlock in MCS queueNysal Jan K.A.
If an interrupt occurs in queued_spin_lock_slowpath() after we increment qnodesp->count and before node->lock is initialized, another CPU might see stale lock values in get_tail_qnode(). If the stale lock value happens to match the lock on that CPU, then we write to the "next" pointer of the wrong qnode. This causes a deadlock as the former CPU, once it becomes the head of the MCS queue, will spin indefinitely until it's "next" pointer is set by its successor in the queue. Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in occasional lockups similar to the following: $ stress-ng --all 128 --vm-bytes 80% --aggressive \ --maximize --oomable --verify --syslog \ --metrics --times --timeout 5m watchdog: CPU 15 Hard LOCKUP ...... NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 Call Trace: 0xc000002cfffa3bf0 (unreliable) _raw_spin_lock+0x6c/0x90 raw_spin_rq_lock_nested.part.135+0x4c/0xd0 sched_ttwu_pending+0x60/0x1f0 __flush_smp_call_function_queue+0x1dc/0x670 smp_ipi_demux_relaxed+0xa4/0x100 xive_muxed_ipi_action+0x20/0x40 __handle_irq_event_percpu+0x80/0x240 handle_irq_event_percpu+0x2c/0x80 handle_percpu_irq+0x84/0xd0 generic_handle_irq+0x54/0x80 __do_irq+0xac/0x210 __do_IRQ+0x74/0xd0 0x0 do_IRQ+0x8c/0x170 hardware_interrupt_common_virt+0x29c/0x2a0 --- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490 ...... NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 --- interrupt: 500 0xc0000029c1a41d00 (unreliable) _raw_spin_lock+0x6c/0x90 futex_wake+0x100/0x260 do_futex+0x21c/0x2a0 sys_futex+0x98/0x270 system_call_exception+0x14c/0x2f0 system_call_vectored_common+0x15c/0x2ec The following code flow illustrates how the deadlock occurs. For the sake of brevity, assume that both locks (A and B) are contended and we call the queued_spin_lock_slowpath() function. CPU0 CPU1 ---- ---- spin_lock_irqsave(A) | spin_unlock_irqrestore(A) | spin_lock(B) | | | ▼ | id = qnodesp->count++; | (Note that nodes[0].lock == A) | | | ▼ | Interrupt | (happens before "nodes[0].lock = B") | | | ▼ | spin_lock_irqsave(A) | | | ▼ | id = qnodesp->count++ | nodes[1].lock = A | | | ▼ | Tail of MCS queue | | spin_lock_irqsave(A) ▼ | Head of MCS queue ▼ | CPU0 is previous tail ▼ | Spin indefinitely ▼ (until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0) | ▼ prev == &qnodes[CPU0].nodes[0] (as qnodes[CPU0].nodes[0].lock == A) | ▼ WRITE_ONCE(prev->next, node) | ▼ Spin indefinitely (until nodes[0].locked == 1) Thanks to Saket Kumar Bhaskar for help with recreating the issue Fixes: 84990b169557 ("powerpc/qspinlock: add mcs queueing for contended waiters") Cc: stable@vger.kernel.org # v6.2+ Reported-by: Geetika Moolchandani <geetika@linux.ibm.com> Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Reported-by: Jijo Varghese <vargjijo@in.ibm.com> Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240829022830.1164355-1-nysal@linux.ibm.com
2024-08-29Merge tag 'random-6.11-rc6-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator fix from Jason Donenfeld: "Reject invalid flags passed to vgetrandom() in the same way that getrandom() does, so that the behavior is the same, from Yann. The flags argument to getrandom() only has a behavioral effect on the function if the RNG isn't initialized yet, so vgetrandom() falls back to the syscall in that case. But if the RNG is initialized, all of the flags behave the same way, so vgetrandom() didn't bother checking them, and just ignored them entirely. But that doesn't account for invalid flags passed in, which need to be rejected so we can use them later" * tag 'random-6.11-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: vDSO: reject unknown getrandom() flags
2024-08-28scsi: ufs: ufs-mediatek: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAPMary Guillemard
MT8183 implements the UFSHCI 2.1 spec but reports a bogus value of 1 in the reserved part for the Legacy Single Doorbell Support (LSDBS) capability. Set UFSHCD_QUIRK_BROKEN_LSDBS_CAP when MCQ support is explicitly disabled, allowing the device to be properly registered. Signed-off-by: Mary Guillemard <mary@mary.zone> Link: https://lore.kernel.org/r/20240818222442.44990-3-mary@mary.zone Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-08-28net: busy-poll: use ktime_get_ns() instead of local_clock()Eric Dumazet
Typically, busy-polling durations are below 100 usec. When/if the busy-poller thread migrates to another cpu, local_clock() can be off by +/-2msec or more for small values of HZ, depending on the platform. Use ktimer_get_ns() to ensure deterministic behavior, which is the whole point of busy-polling. Fixes: 060212928670 ("net: add low latency socket poll") Fixes: 9a3c71aa8024 ("net: convert low latency sockets to sched_clock()") Fixes: 37089834528b ("sched, net: Fixup busy_loop_us_clock()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240827114916.223377-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-28Merge tag 'wireless-2024-08-28' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Regressions: * wfx: fix for open network connection * iwlwifi: fix for hibernate (due to fast resume feature) * iwlwifi: fix for a few warnings that were recently added (had previously been messages not warnings) Previously broken: * mwifiex: fix static structures used for per-device data * iwlwifi: some harmless FW related messages were tagged too high priority * iwlwifi: scan buffers weren't checked correctly * mac80211: SKB leak on beacon error path * iwlwifi: fix ACPI table interop with certain BIOSes * iwlwifi: fix locking for link selection * mac80211: fix SSID comparison in beacon validation * tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: clear trans->state earlier upon error wifi: wfx: repair open network AP mode wifi: mac80211: free skb on error path in ieee80211_beacon_get_ap() wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead wifi: iwlwifi: mvm: allow 6 GHz channels in MLO scan wifi: iwlwifi: mvm: pause TCM when the firmware is stopped wifi: iwlwifi: fw: fix wgds rev 3 exact size wifi: iwlwifi: mvm: take the mutex before running link selection wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room() wifi: iwlwifi: mvm: fix iwl_mvm_scan_fits() calculation wifi: iwlwifi: lower message level for FW buffer destination wifi: iwlwifi: mvm: fix hibernation wifi: mac80211: fix beacon SSID mismatch handling wifi: mwifiex: duplicate static structs used in driver instances ==================== Link: https://patch.msgid.link/20240828100151.23662-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-28selinux,smack: don't bypass permissions check in inode_setsecctx hookScott Mayhew
Marek Gresko reports that the root user on an NFS client is able to change the security labels on files on an NFS filesystem that is exported with root squashing enabled. The end of the kerneldoc comment for __vfs_setxattr_noperm() states: * This function requires the caller to lock the inode's i_mutex before it * is executed. It also assumes that the caller will make the appropriate * permission checks. nfsd_setattr() does do permissions checking via fh_verify() and nfsd_permission(), but those don't do all the same permissions checks that are done by security_inode_setxattr() and its related LSM hooks do. Since nfsd_setattr() is the only consumer of security_inode_setsecctx(), simplest solution appears to be to replace the call to __vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This fixes the above issue and has the added benefit of causing nfsd to recall conflicting delegations on a file when a client tries to change its security label. Cc: stable@kernel.org Reported-by: Marek Gresko <marek.gresko@protonmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=218809 Signed-off-by: Scott Mayhew <smayhew@redhat.com> Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-08-28ice: Add netif_device_attach/detach into PF reset flowDawid Osuchowski
Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net/<interface>/device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c <interface> BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: <TASK> ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner. Fixes: fcea6f3da546 ("ice: Add stats and ethtool support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-28igb: Fix not clearing TimeSync interrupts for 82580Daiwei Li
82580 NICs have a hardware bug that makes it necessary to write into the TSICR (TimeSync Interrupt Cause) register to clear it: https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/ Add a conditional so only for 82580 we write into the TSICR register, so we don't risk losing events for other models. Without this change, when running ptp4l with an Intel 82580 card, I get the following output: > timed out while polling for tx timestamp increasing tx_timestamp_timeout or > increasing kworker priority may correct this issue, but a driver bug likely > causes it This goes away with this change. This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events"). Fixes: ee14cc9ea19b ("igb: Fix missing time sync events") Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/ Tested-by: Daiwei Li <daiweili@google.com> Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Daiwei Li <daiweili@google.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-28cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target regionDavid Howells
Under certain conditions, the range to be cleared by FALLOC_FL_ZERO_RANGE may only be buffered locally and not yet have been flushed to the server. For example: xfs_io -f -t -c "pwrite -S 0x41 0 4k" \ -c "pwrite -S 0x42 4k 4k" \ -c "fzero 0 4k" \ -c "pread -v 0 8k" /xfstest.test/foo will write two 4KiB blocks of data, which get buffered in the pagecache, and then fallocate() is used to clear the first 4KiB block on the server - but we don't flush the data first, which means the EOF position on the server is wrong, and so the FSCTL_SET_ZERO_DATA RPC fails (and xfs_io ignores the error), but then when we try to read it, we see the old data. Fix this by preflushing any part of the target region that above the server's idea of the EOF position to force the server to update its EOF position. Note, however, that we don't want to simply expand the file by moving the EOF before doing the FSCTL_SET_ZERO_DATA[*] because someone else might see the zeroed region or if the RPC fails we then have to try to clean it up or risk getting corruption. [*] And we have to move the EOF first otherwise FSCTL_SET_ZERO_DATA won't do what we want. This fixes the generic/008 xfstest. [!] Note: A better way to do this might be to split the operation into two parts: we only do FSCTL_SET_ZERO_DATA for the part of the range below the server's EOF and then, if that worked, invalidate the buffered pages for the part above the range. Fixes: 6b69040247e1 ("cifs/smb3: Fix data inconsistent when zero file range") Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <stfrench@microsoft.com> cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> cc: Pavel Shilovsky <pshilov@microsoft.com> cc: Paulo Alcantara <pc@manguebit.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit (git 2.34.1) at 2025-09-13 06:08:32 +0000