summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-28netfs, cifs: Fix handling of short DIO readDavid Howells
Short DIO reads, particularly in relation to cifs, are not being handled correctly by cifs and netfslib. This can be tested by doing a DIO read of a file where the size of read is larger than the size of the file. When it crosses the EOF, it gets a short read and this gets retried, and in the case of cifs, the retry read fails, with the failure being translated to ENODATA. Fix this by the following means: (1) Add a flag, NETFS_SREQ_HIT_EOF, for the filesystem to set when it detects that the read did hit the EOF. (2) Make the netfslib read assessment stop processing subrequests when it encounters one with that flag set. (3) Return rreq->transferred, the accumulated contiguous amount read to that point, to userspace for a DIO read. (4) Make cifs set the flag and clear the error if the read RPC returned ENODATA. (5) Make cifs set the flag and clear the error if a short read occurred without error and the read-to file position is now at the remote inode size. Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks") Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2024-08-28cifs: Fix lack of credit renegotiation on read retryDavid Howells
When netfslib asks cifs to issue a read operation, it prefaces this with a call to ->clamp_length() which cifs uses to negotiate credits, providing receive capacity on the server; however, in the event that a read op needs reissuing, netfslib doesn't call ->clamp_length() again as that could shorten the subrequest, leaving a gap. This causes the retried read to be done with zero credits which causes the server to reject it with STATUS_INVALID_PARAMETER. This is a problem for a DIO read that is requested that would go over the EOF. The short read will be retried, causing EINVAL to be returned to the user when it fails. Fix this by making cifs_req_issue_read() negotiate new credits if retrying (NETFS_SREQ_RETRYING now gets set in the read side as well as the write side in this instance). This isn't sufficient, however: the new credits might not be sufficient to complete the remainder of the read, so also add an additional field, rreq->actual_len, that holds the actual size of the op we want to perform without having to alter subreq->len. We then rely on repeated short reads being retried until we finish the read or reach the end of file and make a zero-length read. Also fix a couple of places where the subrequest start and length need to be altered by the amount so far transferred when being used. Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks") Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2024-08-28KVM: SEV: Update KVM_AMD_SEV Kconfig entry and mention SEV-SNPVitaly Kuznetsov
SEV-SNP support is present since commit 1dfe571c12cf ("KVM: SEV: Add initial SEV-SNP support") but Kconfig entry wasn't updated and still mentions SEV and SEV-ES only. Add SEV-SNP there and, while on it, expand 'SEV' in the description as 'Encrypted VMs' is not what 'SEV' stands for. No functional change. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20240828122111.160273-1-vkuznets@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-08-28ASoc: SOF: topology: Clear SOF link platform name upon unloadChen-Yu Tsai
The SOF topology loading function sets the device name for the platform component link. This should be unset when unloading the topology, otherwise a machine driver unbind/bind or reprobe would complain about an invalid component as having both its component name and of_node set: mt8186_mt6366 sound: ASoC: Both Component name/of_node are set for AFE_SOF_DL1 mt8186_mt6366 sound: error -EINVAL: Cannot register card mt8186_mt6366 sound: probe with driver mt8186_mt6366 failed with error -22 This happens with machine drivers that set the of_node separately. Clear the SOF link platform name in the topology unload callback. Fixes: 311ce4fe7637 ("ASoC: SOF: Add support for loading topologies") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://patch.msgid.link/20240821041006.2618855-1-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-28x86/resctrl: Fix arch_mbm_* array overrun on SNCPeter Newman
When using resctrl on systems with Sub-NUMA Clustering enabled, monitoring groups may be allocated RMID values which would overrun the arch_mbm_{local,total} arrays. This is due to inconsistencies in whether the SNC-adjusted num_rmid value or the unadjusted value in resctrl_arch_system_num_rmid_idx() is used. The num_rmid value for the L3 resource is currently: resctrl_arch_system_num_rmid_idx() / snc_nodes_per_l3_cache As a simple fix, make resctrl_arch_system_num_rmid_idx() return the SNC-adjusted, L3 num_rmid value on x86. Fixes: e13db55b5a0d ("x86/resctrl: Introduce snc_nodes_per_l3_cache") Signed-off-by: Peter Newman <peternewman@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lore.kernel.org/r/20240822190212.1848788-1-peternewman@google.com
2024-08-28drm/i915/dp_mst: Fix MST state after a sink resetImre Deak
In some cases the sink can reset itself after it was configured into MST mode, without the driver noticing the disconnected state. For instance the reset may happen in the middle of a modeset, or the (long) HPD pulse generated may be not long enough for the encoder detect handler to observe the HPD's deasserted state. In this case the sink's DPCD register programmed to enable MST will be reset, while the driver still assumes MST is still enabled. Detect this condition, which will tear down and recreate/re-enable the MST topology. v2: - Add a code comment about adjusting the expected DP_MSTM_CTRL register value for SST + SideBand. (Suraj, Jani) - Print a debug message about detecting the link reset. (Jani) - Verify the DPCD MST state only if it wasn't already determined that the sink is disconnected. Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11195 Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> (v1) Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240823162918.1211875-1-imre.deak@intel.com (cherry picked from commit 594cf78dc36f31c0c7e0de4567e644f406d46bae) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-08-28drm/i915/hwmon: expose fan speedRaag Jadav
Add hwmon support for fan1_input attribute, which will expose fan speed in RPM. With this in place we can monitor fan speed using lm-sensors tool. $ sensors i915-pci-0300 Adapter: PCI adapter in0: 653.00 mV fan1: 3833 RPM power1: N/A (max = 43.00 W) energy1: 32.02 kJ v2: Handle overflow, add mutex protection and ABI documentation Aesthetic adjustments (Riana) v3: Change rotations data type, ABI date and version v4: Fix wakeref leak Drop switch case and simplify hwm_fan_xx() (Andi) v5: Rework time calculation, aesthetic adjustments (Andy) v6: Drop redundant overflow logic (Andy) Split fan_input_read() into dedicated helper (Badal) v7: Fix undefined reference to __udivdi3 for i386 (Andy) Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Riana Tauro <riana.tauro@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240823034548.2670032-1-raag.jadav@intel.com
2024-08-28ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devicesChristoffer Sandberg
The Sirius notebooks have two sets of speakers 0x17 (sides) and 0x1d (top center). The side speakers are active by default but the top speakers aren't. This patch provides a pincfg quirk to activate the top speakers. Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20240827102540.9480-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-28Merge tag 'v6.11-rc5-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - two RDMA/smbdirect fixes and a minor cleanup - punch hole fix * tag 'v6.11-rc5-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix FALLOC_FL_PUNCH_HOLE support smb/client: fix rdma usage in smb2_async_writev() smb/client: remove unused rq_iter_size from struct smb_rqst smb/client: avoid dereferencing rdata=NULL in smb2_new_read_req()
2024-08-28Merge tag 'tpmdd-next-6.11-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull TPM fix from Jarkko Sakkinen: "A bug fix for tpm_ibmvtpm driver so that it will take the bus encryption into use" * tag 'tpmdd-next-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: ibmvtpm: Call tpm2_sessions_init() to initialize session support
2024-08-27sctp: fix association labeling in the duplicate COOKIE-ECHO caseOndrej Mosnacek
sctp_sf_do_5_2_4_dupcook() currently calls security_sctp_assoc_request() on new_asoc, but as it turns out, this association is always discarded and the LSM labels never get into the final association (asoc). This can be reproduced by having two SCTP endpoints try to initiate an association with each other at approximately the same time and then peel off the association into a new socket, which exposes the unitialized labels and triggers SELinux denials. Fix it by calling security_sctp_assoc_request() on asoc instead of new_asoc. Xin Long also suggested limit calling the hook only to cases A, B, and D, since in cases C and E the COOKIE ECHO chunk is discarded and the association doesn't enter the ESTABLISHED state, so rectify that as well. One related caveat with SELinux and peer labeling: When an SCTP connection is set up simultaneously in this way, we will end up with an association that is initialized with security_sctp_assoc_request() on both sides, so the MLS component of the security context of the association will get swapped between the peers, instead of just one side setting it to the other's MLS component. However, at that point security_sctp_assoc_request() had already been called on both sides in sctp_sf_do_unexpected_init() (on a temporary association) and thus if the exchange didn't fail before due to MLS, it won't fail now either (most likely both endpoints have the same MLS range). Tested by: - reproducer from https://src.fedoraproject.org/tests/selinux/pull-request/530 - selinux-testsuite (https://github.com/SELinuxProject/selinux-testsuite/) - sctp-tests (https://github.com/sctp/sctp-tests) - no tests failed that wouldn't fail also without the patch applied Fixes: c081d53f97a1 ("security: pass asoc to sctp_assoc_request and sctp_sk_clone") Suggested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Xin Long <lucien.xin@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> (LSM/SELinux) Link: https://patch.msgid.link/20240826130711.141271-1-omosnace@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.Maarten Lankhorst
For CCS formats on affected platforms, CCS can be used freely, but display engine requires a multiple of 64k physical pages. No other changes are needed. At the BO creation time we don't know if the BO will be used for CCS or not. If the scanout flag is set, and the BO is a multiple of 64k, we take the safe route and force the physical alignment of 64k pages. If the BO is not a multiple of 64k, or the scanout flag was not set at BO creation, we reject it for usage as CCS in display. The physical pages are likely not aligned correctly, and this will cause corruption when used as FB. The scanout flag and size being a multiple of 64k are used together to enforce 64k physical placement. VM_BIND is completely unaffected, mappings to a VM can still be aligned to 4k, just like for normal buffers. Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240826170117.327709-3-maarten.lankhorst@linux.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-27drm/i915/display: Plane capability for 64k phys alignmentMaarten Lankhorst
Some plane formats have been designed to require 64k physical alignment. By returning whether this is the case for certain formats, we do not need to hardcode this check inside Xe. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240826170117.327709-2-maarten.lankhorst@linux.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-27drm/amdgpu/swsmu: always force a state reprogram on initAlex Deucher
Always reprogram the hardware state on init. This ensures the PMFW state is explicitly programmed and we are not relying on the default PMFW state. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3131 Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amdgpu/display: remove unnecessary TODO spl_os_types.hZaeem Mohamed
Remove unnecessary TODO from spl_os_types.h Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amdgpu/display: SPDX copyright for spl_os_types.hZaeem Mohamed
Use appropriate SPDX copyright for spl_os_types.h Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Add DSC Debug LogFangzhi Zuo
Add DSC log in each critical routines to facilitate debugging. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: 3.2.298Aric Cyr
This version brings along the following fixes: - Fix MS/MP mismatches in dml21 for dcn401 - Resolved Coverity issues - Add back quality EASF and ISHARP and dc dependency changes - Add sharpness support for windowed YUV420 video - Add improvements for text display and HDR DWM and MPO - Fix Synaptics Cascaded Panamera DSC Determination - Allocate DCN35 clock table transfer buffers in GART - Add Replay Low Refresh Rate parameters in dc type Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: add sharpness support for windowed YUV420 videoSamson Tam
[Why] Previous only applied sharpness for fullscreen YUV420 video. [How] Remove fullscrene restriction and apply sharpness for windowed YUV420 video as well. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: add improvements for text display and HDR DWM and MPOSamson Tam
[Why] Tune settings for improved text display. Handle differences between DWM and MPO in HDR path. [How] Update sharpener LBA table. Use HDR multiplier to calculate scalar matrix coefficients for HDR RGB MPO path. Update unit tests. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Add Replay Low Refresh Rate parameters in dc type.Dennis Chan
Why: To supported Low Refresh Rate panel for Replay Feature, Adding some parameters to record Low Refresh Rate information. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: add back quality EASF and ISHARP and dc dependency changesSamson Tam
[Why] Addressed previous issues with quality changes and new issues due to rolling back quality changes. [How] This reverts commit f9e6759888866748f31b6b6c2142a481d587f51f, fixes merge conflicts, and fixed some formatting errors. Store current sharpness level for each pregen table to minimize calculating sharpness table every time. Disable dynamic ODM when sharpness is enabled. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Notify DMCUB of D0/D3 stateNicholas Kazlauskas
[Why] We want to avoid arming the HPD timer in firmware when preparing for S0i3 entry when DC is considered in D3. [How] Notify DMCUB of the power state transitions so it can decide to arm the HPD timer for idle in DCN35 only in D0. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Fix Synaptics Cascaded Panamera DSC DeterminationFangzhi Zuo
Synaptics Cascaded Panamera topology needs to unconditionally acquire root aux for dsc decoding. Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Retry Replay residencyChunTao Tso
[Why] Because sometime DMUB GPINT will time out, it will cause we return 0 as residency number. [How] Retry to avoid this happened. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Allocate DCN35 clock table transfer buffers in GARTNicholas Kazlauskas
[Why] Request from PMFW to use GART for clock table transfer tables as framebuffer is being deprecated on APU. [How] Switch over to GART via the allocation flag. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: do not set traslate_by_source for DCN401 cursorAurabindo Pillai
translate_by_source need not be set for DCN401 onwards since cursor cursor composition comes after scaler in the hardware pipeline. Hence offset calculation has been reworked, and this setting is not necessary to be enabled anymore. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Resolve Coverity IssuesDaniel Sa
[WHY] Remove coverity issues that were originally ignored. [HOW] Ran coverity locally on driver, used output report to find existing coverity issues, resolved them Reviewed-by: Nicholas Choi <nicholas.choi@amd.com> Signed-off-by: Daniel Sa <Daniel.Sa@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Fix MS/MP mismatches in dml21 for dcn401Dillon Varone
[WHY] Prefetch calculations did not guarantee that bandwidth required in mode support was less than mode programming which can cause failures. [HOW] Fix bandwidth calculations to assume fixed times for OTO schedule, and choose which schedule to use based on time to fetch pixel data. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Wait for all pending cleared before full updateAlvin Lee
[Description] Before every full update we must wait for all pending updates to be cleared - this is particularly important for minimal transitions because if we don't wait for pending cleared, it will be as if there was no minimal transition at all. In OTG we must read 3 different status registers for pending cleared, one specifically for OTG updates, one specifically for OPTC updates, and the last for surface related updates Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: guard write a 0 post_divider value to HWAhmed, Muhammad
[why] post_divider_value should not be 0. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ahmed, Muhammad <Ahmed.Ahmed@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Don't skip clock updates in overclockingAlvin Lee
[Description] Skipping clock updates is not a hard requirement for overclocking and only an optimization. Remove the skip as this can cause issues for FAMS transitions during the overclock sequence. If FAMS is enabled we must disable UCLK switch on any full update (which requires update clocks to be called). Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd: Introduce additional IPS debug flagsLeo Li
[Why] Idle power states (IPS) describe levels of power-gating within DCN. DM and DC is responsible for ensuring that we are out of IPS before any DCN programming happens. Any DCN programming while we're in IPS leads to undefined behavior (mostly hangs). Because IPS intersects with all display features, the ability to disable IPS by default while ironing out the known issues is desired. However, disabing it completely will cause important features such as s0ix entry to fail. Therefore, more granular IPS debug flags are desired. [How] Extend the dc debug mask bits to include the available list of IPS debug flags. All the flags should work as documented, with the exception of IPS_DISABLE_DYNAMIC. It requires dm changes which will be done in later changes. v2: enable docs and fix docstring format Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amdgpu/smu13.0.7: print index for profilesAlex Deucher
Print the index for the profiles. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3543 Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amdgpu/swsmu: fix ordering for setting workload_maskAlex Deucher
No change in functionality for the current code, but we need to set the index properly before changing it if we ever use a non-0 index. Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amdgpu: align pp_power_profile_mode with kernel docsAlex Deucher
The kernel doc says you need to select manual mode to adjust this, but the code only allows you to adjust it when manual mode is not selected. Remove the manual mode check. Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27Merge branch 'mptcp-close-subflow-when-receiving-tcp-fin-and-misc'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: close subflow when receiving TCP+FIN and misc. Here are different fixes: Patch 1 closes the subflow after having received a FIN, instead of leaving it half-closed until the end of the MPTCP connection. A fix for v5.12. Patch 2 validates the previous patch. Patch 3 is a fix for a recent fix to check both directions for the backup flag. It can follow the 'Fixes' commit and be backported up to v5.7. Patch 4 adds a missing \n at the end of pr_debug(), causing debug messages to be displayed with a delay, which confuses the debugger. A fix for v5.6. ==================== Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-0-905199fe1172@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27mptcp: pr_debug: add missing \n at the endMatthieu Baerts (NGI0)
pr_debug() have been added in various places in MPTCP code to help developers to debug some situations. With the dynamic debug feature, it is easy to enable all or some of them, and asks users to reproduce issues with extra debug. Many of these pr_debug() don't end with a new line, while no 'pr_cont()' are used in MPTCP code. So the goal was not to display multiple debug messages on one line: they were then not missing the '\n' on purpose. Not having the new line at the end causes these messages to be printed with a delay, when something else needs to be printed. This issue is not visible when many messages need to be printed, but it is annoying and confusing when only specific messages are expected, e.g. # echo "func mptcp_pm_add_addr_echoed +fmp" \ > /sys/kernel/debug/dynamic_debug/control # ./mptcp_join.sh "signal address"; \ echo "$(awk '{print $1}' /proc/uptime) - end"; \ sleep 5s; \ echo "$(awk '{print $1}' /proc/uptime) - restart"; \ ./mptcp_join.sh "signal address" 013 signal address (...) 10.75 - end 15.76 - restart 013 signal address [ 10.367935] mptcp:mptcp_pm_add_addr_echoed: MPTCP: msk=(...) (...) => a delay of 5 seconds: printed with a 10.36 ts, but after 'restart' which was printed at the 15.76 ts. The 'Fixes' tag here below points to the first pr_debug() used without '\n' in net/mptcp. This patch could be split in many small ones, with different Fixes tag, but it doesn't seem worth it, because it is easy to re-generate this patch with this simple 'sed' command: git grep -l pr_debug -- net/mptcp | xargs sed -i "s/\(pr_debug(\".*[^n]\)\(\"[,)]\)/\1\\\n\2/g" So in case of conflicts, simply drop the modifications, and launch this command. Fixes: f870fa0b5768 ("mptcp: Add MPTCP socket stubs") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-4-905199fe1172@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27mptcp: sched: check both backup in retransMatthieu Baerts (NGI0)
The 'mptcp_subflow_context' structure has two items related to the backup flags: - 'backup': the subflow has been marked as backup by the other peer - 'request_bkup': the backup flag has been set by the host Looking only at the 'backup' flag can make sense in some cases, but it is not the behaviour of the default packet scheduler when selecting paths. As explained in the commit b6a66e521a20 ("mptcp: sched: check both directions for backup"), the packet scheduler should look at both flags, because that was the behaviour from the beginning: the 'backup' flag was set by accident instead of the 'request_bkup' one. Now that the latter has been fixed, get_retrans() needs to be adapted as well. Fixes: b6a66e521a20 ("mptcp: sched: check both directions for backup") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-3-905199fe1172@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27selftests: mptcp: join: cannot rm sf if closedMatthieu Baerts (NGI0)
Thanks to the previous commit, the MPTCP subflows are now closed on both directions even when only the MPTCP path-manager of one peer asks for their closure. In the two tests modified here -- "userspace pm add & remove address" and "userspace pm create destroy subflow" -- one peer is controlled by the userspace PM, and the other one by the in-kernel PM. When the userspace PM sends a RM_ADDR notification, the in-kernel PM will automatically react by closing all subflows using this address. Now, thanks to the previous commit, the subflows are properly closed on both directions, the userspace PM can then no longer closes the same subflows if they are already closed. Before, it was OK to do that, because the subflows were still half-opened, still OK to send a RM_ADDR. In other words, thanks to the previous commit closing the subflows, an error will be returned to the userspace if it tries to close a subflow that has already been closed. So no need to run this command, which mean that the linked counters will then not be incremented. These tests are then no longer sending both a RM_ADDR, then closing the linked subflow just after. The test with the userspace PM on the server side is now removing one subflow linked to one address, then sending a RM_ADDR for another address. The test with the userspace PM on the client side is now only removing the subflow that was previously created. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-2-905199fe1172@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27mptcp: close subflow when receiving TCP+FINMatthieu Baerts (NGI0)
When a peer decides to close one subflow in the middle of a connection having multiple subflows, the receiver of the first FIN should accept that, and close the subflow on its side as well. If not, the subflow will stay half closed, and would even continue to be used until the end of the MPTCP connection or a reset from the network. The issue has not been seen before, probably because the in-kernel path-manager always sends a RM_ADDR before closing the subflow. Upon the reception of this RM_ADDR, the other peer will initiate the closure on its side as well. On the other hand, if the RM_ADDR is lost, or if the path-manager of the other peer only closes the subflow without sending a RM_ADDR, the subflow would switch to TCP_CLOSE_WAIT, but that's it, leaving the subflow half-closed. So now, when the subflow switches to the TCP_CLOSE_WAIT state, and if the MPTCP connection has not been closed before with a DATA_FIN, the kernel owning the subflow schedules its worker to initiate the closure on its side as well. This issue can be easily reproduced with packetdrill, as visible in [1], by creating an additional subflow, injecting a FIN+ACK before sending the DATA_FIN, and expecting a FIN+ACK in return. Fixes: 40947e13997a ("mptcp: schedule worker when subflow is closed") Cc: stable@vger.kernel.org Link: https://github.com/multipath-tcp/packetdrill/pull/154 [1] Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-1-905199fe1172@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27tcp: fix forever orphan socket caused by tcp_abortXueming Feng
We have some problem closing zero-window fin-wait-1 tcp sockets in our environment. This patch come from the investigation. Previously tcp_abort only sends out reset and calls tcp_done when the socket is not SOCK_DEAD, aka orphan. For orphan socket, it will only purging the write queue, but not close the socket and left it to the timer. While purging the write queue, tp->packets_out and sk->sk_write_queue is cleared along the way. However tcp_retransmit_timer have early return based on !tp->packets_out and tcp_probe_timer have early return based on !sk->sk_write_queue. This caused ICSK_TIME_RETRANS and ICSK_TIME_PROBE0 not being resched and socket not being killed by the timers, converting a zero-windowed orphan into a forever orphan. This patch removes the SOCK_DEAD check in tcp_abort, making it send reset to peer and close the socket accordingly. Preventing the timer-less orphan from happening. According to Lorenzo's email in the v1 thread, the check was there to prevent force-closing the same socket twice. That situation is handled by testing for TCP_CLOSE inside lock, and returning -ENOENT if it is already closed. The -ENOENT code comes from the associate patch Lorenzo made for iproute2-ss; link attached below, which also conform to RFC 9293. At the end of the patch, tcp_write_queue_purge(sk) is removed because it was already called in tcp_done_with_error(). p.s. This is the same patch with v2. Resent due to mis-labeled "changes requested" on patchwork.kernel.org. Link: https://patchwork.ozlabs.org/project/netdev/patch/1450773094-7978-3-git-send-email-lorenzo@google.com/ Fixes: c1e64e298b8c ("net: diag: Support destroying TCP sockets.") Signed-off-by: Xueming Feng <kuro@kuroa.me> Tested-by: Lorenzo Colitti <lorenzo@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240826102327.1461482-1-kuro@kuroa.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27gtp: fix a potential NULL pointer dereferenceCong Wang
When sockfd_lookup() fails, gtp_encap_enable_socket() returns a NULL pointer, but its callers only check for error pointers thus miss the NULL pointer case. Fix it by returning an error pointer with the error code carried from sockfd_lookup(). (I found this bug during code inspection.) Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Cc: Andreas Schultz <aschultz@tpip.net> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240825191638.146748-1-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27Merge drm/drm-next into drm-intel-nextRodrigo Vivi
Need to take some Xe bo definition in here before we can add the BMG display 64k aligned size restrictions. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-27rust: allow `stable_features` lintMiguel Ojeda
Support for several Rust compiler versions started in commit 63b27f4a0074 ("rust: start supporting several compiler versions"). Since we currently need to use a number of unstable features in the kernel, it is a matter of time until one gets stabilized and the `stable_features` lint warns. For instance, the `new_uninit` feature may become stable soon, which would give us multiple warnings like the following: warning: the feature `new_uninit` has been stable since 1.82.0-dev and no longer requires an attribute to enable --> rust/kernel/lib.rs:17:12 | 17 | #![feature(new_uninit)] | ^^^^^^^^^^ | = note: `#[warn(stable_features)]` on by default Thus allow the `stable_features` lint to avoid such warnings. This is the simplest approach -- we do not have that many cases (and the goal is to stop using unstable features anyway) and cleanups can be easily done when we decide to update the minimum version. An alternative would be to conditionally enable them based on the compiler version (with the upcoming `RUSTC_VERSION` or maybe with the unstable `cfg(version(...))`, but that one apparently will not work for the nightly case). However, doing so is more complex and may not work well for different nightlies of the same version, unless we do not care about older nightlies. Another alternative is using explicit tests of the feature calling `rustc`, but that is also more complex and slower. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240827100403.376389-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-08-27docs: rust: remove unintended blockquote in Quick StartJon Mulder
Remove indentation within the "Hacking" section of the Rust Quick Start guide, i.e. remove a `<blockquote>` HTML element from the rendered documentation. Reported-by: Miguel Ojeda <ojeda@kernel.org> Closes: https://github.com/Rust-for-Linux/linux/issues/1103 Fixes: d07479b211b7 ("docs: add Rust documentation") Signed-off-by: Jon Mulder <jon.e.mulder@gmail.com> Link: https://lore.kernel.org/r/20240826-pr-docs-rust-remove-quickstart-blockquote-v1-1-c51317d8d71a@gmail.com [ Added Fixes tag, reworded slightly and matched title to a previous, similar commit. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-08-27Merge branch 'fixes-for-ipsec-over-bonding'Jakub Kicinski
Jianbo Liu says: ==================== Fixes for IPsec over bonding This patchset provides bug fixes for IPsec over bonding driver. It adds the missing xdo_dev_state_free API, and fixes "scheduling while atomic" by using mutex lock instead. Series generated against: commit c07ff8592d57 ("netem: fix return value if duplicate enqueue fails") ==================== Link: https://patch.msgid.link/20240823031056.110999-1-jianbol@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27bonding: change ipsec_lock from spin lock to mutexJianbo Liu
In the cited commit, bond->ipsec_lock is added to protect ipsec_list, hence xdo_dev_state_add and xdo_dev_state_delete are called inside this lock. As ipsec_lock is a spin lock and such xfrmdev ops may sleep, "scheduling while atomic" will be triggered when changing bond's active slave. [ 101.055189] BUG: scheduling while atomic: bash/902/0x00000200 [ 101.055726] Modules linked in: [ 101.058211] CPU: 3 PID: 902 Comm: bash Not tainted 6.9.0-rc4+ #1 [ 101.058760] Hardware name: [ 101.059434] Call Trace: [ 101.059436] <TASK> [ 101.060873] dump_stack_lvl+0x51/0x60 [ 101.061275] __schedule_bug+0x4e/0x60 [ 101.061682] __schedule+0x612/0x7c0 [ 101.062078] ? __mod_timer+0x25c/0x370 [ 101.062486] schedule+0x25/0xd0 [ 101.062845] schedule_timeout+0x77/0xf0 [ 101.063265] ? asm_common_interrupt+0x22/0x40 [ 101.063724] ? __bpf_trace_itimer_state+0x10/0x10 [ 101.064215] __wait_for_common+0x87/0x190 [ 101.064648] ? usleep_range_state+0x90/0x90 [ 101.065091] cmd_exec+0x437/0xb20 [mlx5_core] [ 101.065569] mlx5_cmd_do+0x1e/0x40 [mlx5_core] [ 101.066051] mlx5_cmd_exec+0x18/0x30 [mlx5_core] [ 101.066552] mlx5_crypto_create_dek_key+0xea/0x120 [mlx5_core] [ 101.067163] ? bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.067738] ? kmalloc_trace+0x4d/0x350 [ 101.068156] mlx5_ipsec_create_sa_ctx+0x33/0x100 [mlx5_core] [ 101.068747] mlx5e_xfrm_add_state+0x47b/0xaa0 [mlx5_core] [ 101.069312] bond_change_active_slave+0x392/0x900 [bonding] [ 101.069868] bond_option_active_slave_set+0x1c2/0x240 [bonding] [ 101.070454] __bond_opt_set+0xa6/0x430 [bonding] [ 101.070935] __bond_opt_set_notify+0x2f/0x90 [bonding] [ 101.071453] bond_opt_tryset_rtnl+0x72/0xb0 [bonding] [ 101.071965] bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.072567] kernfs_fop_write_iter+0x10c/0x1a0 [ 101.073033] vfs_write+0x2d8/0x400 [ 101.073416] ? alloc_fd+0x48/0x180 [ 101.073798] ksys_write+0x5f/0xe0 [ 101.074175] do_syscall_64+0x52/0x110 [ 101.074576] entry_SYSCALL_64_after_hwframe+0x4b/0x53 As bond_ipsec_add_sa_all and bond_ipsec_del_sa_all are only called from bond_change_active_slave, which requires holding the RTNL lock. And bond_ipsec_add_sa and bond_ipsec_del_sa are xfrm state xdo_dev_state_add and xdo_dev_state_delete APIs, which are in user context. So ipsec_lock doesn't have to be spin lock, change it to mutex, and thus the above issue can be resolved. Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20240823031056.110999-4-jianbol@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27bonding: extract the use of real_device into local variableJianbo Liu
Add a local variable for slave->dev, to prepare for the lock change in the next patch. There is no functionality change. Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20240823031056.110999-3-jianbol@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27bonding: implement xdo_dev_state_free and call it after deletionJianbo Liu
Add this implementation for bonding, so hardware resources can be freed from the active slave after xfrm state is deleted. The netdev used to invoke xdo_dev_state_free callback, is saved in the xfrm state (xs->xso.real_dev), which is also the bond's active slave. To prevent it from being freed, acquire netdev reference before leaving RCU read-side critical section, and release it after callback is done. And call it when deleting all SAs from old active real interface while switching current active slave. Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20240823031056.110999-2-jianbol@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 18:43:09 +0000