| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs multigrain timestamps from Christian Brauner:
"This is another try at implementing multigrain timestamps. This time
with significant help from the timekeeping maintainers to reduce the
performance impact.
Thomas provided a base branch that contains the required timekeeping
interfaces for the VFS. It serves as the base for the multi-grain
timestamp work:
- Multigrain timestamps allow the kernel to use fine-grained
timestamps when an inode's attributes is being actively observed
via ->getattr(). With this support, it's possible for a file to get
a fine-grained timestamp, and another modified after it to get a
coarse-grained stamp that is earlier than the fine-grained time. If
this happens then the files can appear to have been modified in
reverse order, which breaks VFS ordering guarantees.
To prevent this, a floor value is maintained for multigrain
timestamps. Whenever a fine-grained timestamp is handed out, record
it, and when later coarse-grained stamps are handed out, ensure
they are not earlier than that value. If the coarse-grained
timestamp is earlier than the fine-grained floor, return the floor
value instead.
The timekeeper changes add a static singleton atomic64_t into
timekeeper.c that is used to keep track of the latest fine-grained
time ever handed out. This is tracked as a monotonic ktime_t value
to ensure that it isn't affected by clock jumps. Because it is
updated at different times than the rest of the timekeeper object,
the floor value is managed independently of the timekeeper via a
cmpxchg() operation, and sits on its own cacheline.
Two new public timekeeper interfaces are added:
(1) ktime_get_coarse_real_ts64_mg() fills a timespec64 with the
later of the coarse-grained clock and the floor time
(2) ktime_get_real_ts64_mg() gets the fine-grained clock value,
and tries to swap it into the floor. A timespec64 is filled
with the result.
- The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around
1 per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting
via NFSv3, which relies on timestamps to validate caches. A lot of
changes can happen in a jiffy, so timestamps aren't sufficient to
help the client decide when to invalidate the cache. Even with
NFSv4, a lot of exported filesystems don't properly support a
change attribute and are subject to the same problems with
timestamp granularity. Other applications have similar issues with
timestamps (e.g backup applications).
If we were to always use fine-grained timestamps, that would
improve the situation, but that becomes rather expensive, as the
underlying filesystem would have to log a lot more metadata
updates.
This adds a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in
inode->i_ctime_nsec as a flag that indicates whether the current
timestamps have been queried via stat() or the like. When it's set,
we allow the kernel to use a fine-grained timestamp iff it's
necessary to make the ctime show a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible
for a file being changed to get a fine-grained timestamp. A file
that is altered just a bit later can then get a coarse-grained one
that appears older than the earlier fine-grained time. This
violates timestamp ordering guarantees.
This is where the earlier mentioned timkeeping interfaces help. A
global monotonic atomic64_t value is kept that acts as a timestamp
floor. When we go to stamp a file, we first get the latter of the
current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it
with that value.
If it has been queried, then first see whether the current coarse
time is later than the existing ctime. If it is, then we accept
that value. If it isn't, then we get a fine-grained time and try to
swap that into the global floor. Whether that succeeds or fails, we
take the resulting floor time, convert it to realtime and try to
swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails,
since either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same
floor value as multigrain filesystems)"
* tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reduce pointer chasing in is_mgtime() test
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
timekeeping: Add percpu counter for tracking floor swap events
timekeeping: Add interfaces for handling timestamps with a floor value
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
|
|
A timer sigqueue may find itself already pending when it is tried to
be enqueued. This situation can happen if the timer sigqueue is enqueued
but then the timer is reset afterwards and fires before the pending
signal managed to be delivered.
However when such a double enqueue occurs while the corresponding signal
is ignored, the sigqueue is expected to be found either on the dedicated
ignored list if the timer was periodic or dropped if the timer was
one-shot. In any case it is not supposed to be queued on the real signal
queue.
An assertion verifies the latter expectation on top of the return value
of prepare_signal(), assuming "false" means that the signal is being
ignored. But prepare_signal() may also fail if the target is exiting as
the last task of its group. In this case the double enqueue observes the
sigqueue queued, as in such a situation:
TASK A (same group as B) TASK B (same group as A)
------------------------ ------------------------
// timer event
// queue signal to TASK B
posix_timer_queue_signal()
// reset timer through syscall
do_timer_settime()
// exit, leaving task B alone
do_exit()
do_exit()
synchronize_group_exit()
signal->flags = SIGNAL_GROUP_EXIT
// ========> <IRQ> timer event
posix_timer_queue_signal()
// return false due to SIGNAL_GROUP_EXIT
if (!prepare_signal())
WARN_ON_ONCE(!list_empty(&q->list))
And this spuriously triggers this warning:
WARNING: CPU: 0 PID: 5854 at kernel/signal.c:2008 posixtimer_send_sigqueue
CPU: 0 UID: 0 PID: 5854 Comm: syz-executor139 Not tainted 6.12.0-rc6-next-20241108-syzkaller #0
RIP: 0010:posixtimer_send_sigqueue+0x9da/0xbc0 kernel/signal.c:2008
Call Trace:
<IRQ>
alarm_handle_timer
alarmtimer_fired
__run_hrtimer
__hrtimer_run_queues
hrtimer_interrupt
local_apic_timer_interrupt
__sysvec_apic_timer_interrupt
instr_sysvec_apic_timer_interrupt
sysvec_apic_timer_interrupt
</IRQ>
Fortunately the recovery code in that case already does the right thing:
just exit from posixtimer_send_sigqueue() and wait for __exit_signal()
to flush the pending signal. Just make sure to warn only the case when
the sigqueue is queued and the signal is really ignored.
Fixes: df7a996b4dab ("signal: Queue ignored posixtimers on ignore list")
Reported-by: syzbot+852e935b899bde73626e@syzkaller.appspotmail.com
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: syzbot+852e935b899bde73626e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/20241116234823.28497-1-frederic@kernel.org
Closes: https://lore.kernel.org/all/673549c6.050a0220.1324f8.008c.GAE@google.com
|
|
When using both function tracer and function graph simultaneously,
it is found that function tracer sometimes captures a fake parent ip
(return_to_handler) instead of the true parent ip.
This issue is easy to reproduce. Below are my reproduction steps:
jeff-labs:~/bin # ./trace-net.sh
jeff-labs:~/bin # cat /sys/kernel/debug/tracing/instances/foo/trace | grep return_to_handler
trace-net.sh-405 [001] ...2. 31.859501: avc_has_perm+0x4/0x190 <-return_to_handler+0x0/0x40
trace-net.sh-405 [001] ...2. 31.859503: simple_setattr+0x4/0x70 <-return_to_handler+0x0/0x40
trace-net.sh-405 [001] ...2. 31.859503: truncate_pagecache+0x4/0x60 <-return_to_handler+0x0/0x40
trace-net.sh-405 [001] ...2. 31.859505: unmap_mapping_range+0x4/0x140 <-return_to_handler+0x0/0x40
trace-net.sh-405 [001] ...3. 31.859508: _raw_spin_unlock+0x4/0x30 <-return_to_handler+0x0/0x40
[...]
The following is my simple trace script:
<snip>
jeff-labs:~/bin # cat ./trace-net.sh
TRACE_PATH="/sys/kernel/tracing"
set_events() {
echo 1 > $1/events/net/enable
echo 1 > $1/events/tcp/enable
echo 1 > $1/events/sock/enable
echo 1 > $1/events/napi/enable
echo 1 > $1/events/fib/enable
echo 1 > $1/events/neigh/enable
}
set_events ${TRACE_PATH}
echo 1 > ${TRACE_PATH}/options/sym-offset
echo 1 > ${TRACE_PATH}/options/funcgraph-tail
echo 1 > ${TRACE_PATH}/options/funcgraph-proc
echo 1 > ${TRACE_PATH}/options/funcgraph-abstime
echo 'tcp_orphan*' > ${TRACE_PATH}/set_ftrace_notrace
echo function_graph > ${TRACE_PATH}/current_tracer
INSTANCE_FOO=${TRACE_PATH}/instances/foo
if [ ! -e $INSTANCE_FOO ]; then
mkdir ${INSTANCE_FOO}
fi
set_events ${INSTANCE_FOO}
echo 1 > ${INSTANCE_FOO}/options/sym-offset
echo 'tcp_orphan*' > ${INSTANCE_FOO}/set_ftrace_notrace
echo function > ${INSTANCE_FOO}/current_tracer
echo 1 > ${TRACE_PATH}/tracing_on
echo 1 > ${INSTANCE_FOO}/tracing_on
echo > ${TRACE_PATH}/trace
echo > ${INSTANCE_FOO}/trace
</snip>
Link: https://lore.kernel.org/20241008033159.22459-1-jeff.xie@linux.dev
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jeff Xie <jeff.xie@linux.dev>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Ensure the superblock is kept alive until we're done with iput().
Holding a reference to an inode is not allowed unless we ensure the
superblock stays alive, which fsnotify does by keeping the
watched_objects count elevated, so iput() must happen before the
watched_objects decrement.
This can lead to a UAF of something like sb->s_fs_info in tmpfs, but the
UAF is hard to hit because race orderings that oops are more likely, thanks
to the CHECK_DATA_CORRUPTION() block in generic_shutdown_super().
Also, ensure that fsnotify_put_sb_watched_objects() doesn't call
fsnotify_sb_watched_objects() on a superblock that may have already been
freed, which would cause a UAF read of sb->s_fsnotify_info.
Cc: stable@kernel.org
Fixes: d2f277e26f52 ("fsnotify: rename fsnotify_{get,put}_sb_connectors()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
If dlm_recover_members() fails we don't drop the references of the
previous created root_list that holds and keep all rsbs alive during the
recovery. It might be not an unlikely event because ping_members() could
run into an -EINTR if another recovery progress was triggered again.
Fixes: 3a747f4a2ee8 ("dlm: move rsb root_list to ls_recover() stack")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Problem: When using kdb via keyboard it does not react to control
characters which are supported in serial mode.
Example: Chords such as ctrl+a/e/d/p do not work in keyboard mode
Solution: Before disregarding non-printable key characters, check if they
are one of the supported control characters, I have took the control
characters from the switch case upwards in this function that translates
scan codes of arrow keys/backspace/home/.. to the control characters.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241111215622.GA161253@lichtman.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
Going forward, I'll be using my kernel.org address for upstream work.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241108-new-maintainer-address-2-v1-2-47c9d71aac11@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
The word "trace" begins with a consonant sound,
so "a" should be used instead of "an".
Link: https://lore.kernel.org/20241107095327.6390-1-liujing@cmss.chinamobile.com
Signed-off-by: liujing <liujing@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
LS7A HD-Audio disable interrupts and use polling mode due to hardware
drawbacks. As a result, unsolicited jack events are also unusable. If
we want to support headphone hotplug, we need to also poll jack events.
Here we use 1500ms as the poll interval if no module parameter specify
it.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20241115150653.2819100-1-chenhuacai@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull 6.12 devel branch for further HD-audio and USB-audio fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.13
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
|
|
|
|
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: enable DSCP to priority map for RX
Configure default DSCP to User Priority mapping registers as per:
https://datatracker.ietf.org/doc/html/rfc8325#section-4.3
and
https://datatracker.ietf.org/doc/html/rfc8622#section-11
Also update Priority to Thread maping to be compliant with
IEEE802.1Q-2014. Priority Code Point (PCP) 2 is higher priority than
PCP 0 (Best Effort). PCP 1 (Background) is lower priority than
PCP 0 (Best Effort).
---
Changes in v4:
- Updated default DSCP to User Priority mapping as per
https://datatracker.ietf.org/doc/html/rfc8325#section-4.3
and
https://datatracker.ietf.org/doc/html/rfc8622#section-11
- Link to v3: https://lore.kernel.org/r/20241109-am65-cpsw-multi-rx-dscp-v3-0-1cfb76928490@kernel.org
Changes in v3:
- Added Reviewed-by tag to patch 1
- Added macros for DSCP PRI field size and DSCP PRI per register
- Drop unnecessary readl() in am65_cpsw_port_set_dscp_map()
- Link to v2: https://lore.kernel.org/r/20241107-am65-cpsw-multi-rx-dscp-v2-0-9e9cd1920035@kernel.org
Changes in v2:
- Updated references to more recent standard IEEE802.1Q-2014.
- Dropped reference to web link which might change in the future.
- Typo fix in commit log.
- Link to v1: https://lore.kernel.org/r/20241105-am65-cpsw-multi-rx-dscp-v1-0-38db85333c88@kernel.org
====================
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AM65 CPSW hardware can map the 6-bit DSCP/TOS field to
appropriate priority queue via DSCP to Priority mapping registers
(CPSW_PN_RX_PRI_MAP_REG).
Use a default DSCP to User Priority (UP) mapping as per
https://datatracker.ietf.org/doc/html/rfc8325#section-4.3
and
https://datatracker.ietf.org/doc/html/rfc8622#section-11
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IEEE802.1Q-2014 supersedes IEEE802.1D-2004. Now Priority Code Point (PCP)
2 is no longer at a lower priority than PCP 0. PCP 1 (Background) is still
at a lower priority than PCP 0 (Best Effort).
Reference:
IEEE802.1Q-2014, Standard for Local and metropolitan area networks
Table I-2 - Traffic type acronyms
Table I-3 - Defining traffic types
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Philo Lu says:
====================
udp: Add 4-tuple hash for connected sockets
This patchset introduces 4-tuple hash for connected udp sockets, to make
connected udp lookup faster.
Stress test results (with 1 cpu fully used) are shown below, in pps:
(1) _un-connected_ socket as server
[a] w/o hash4: 1,825176
[b] w/ hash4: 1,831750 (+0.36%)
(2) 500 _connected_ sockets as server
[c] w/o hash4: 290860 (only 16% of [a])
[d] w/ hash4: 1,889658 (+3.1% compared with [b])
With hash4, compute_score is skipped when lookup, so [d] is slightly
better than [b].
Patch1: Add a new counter for hslot2 named hash4_cnt, to avoid cache line
miss when lookup.
Patch2: Add hslot/hlist_nulls for 4-tuple hash.
Patch3 and 4: Implement 4-tuple hash for ipv4 and ipv6.
The detailed motivation is described in Patch 3.
The 4-tuple hash increases the size of udp_sock and udp_hslot. Thus add it
with CONFIG_BASE_SMALL, i.e., it's a no op with CONFIG_BASE_SMALL.
Intentionally, the feature is not available for udplite. Though udplite
shares some structs and functions with udp, its connect() keeps unchanged.
So all udplite sockets perform the same as un-connected udp sockets.
Besides, udplite also shares the additional memory consumption in udp_sock
and udptable.
changelogs:
v8 -> v9 (Paolo Abeni):
- Add explanation about udplite in cover letter
- Update tags for co-developers
- Add acked-by tags of Paolo and Willem
v7 -> v8:
- add EXPORT_SYMBOL for ipv6.ko build
v6 -> v7 (Kuniyuki Iwashima):
- export udp_ehashfn to be used by udpv6 rehash
v5 -> v6 (Paolo Abeni):
- move udp_table_hash4_init from patch2 to patch1
- use hlist_nulls for lookup-rehash race
- add test results in commit log
- add more comment, e.g., for rehash4 used in hash4
- add ipv6 support (Patch4), and refactor some functions for better
sharing, without functionality change
v4 -> v5 (Paolo Abeni):
- add CONFIG_BASE_SMALL with which udp hash4 does nothing
v3 -> v4 (Willem de Bruijn):
- fix mistakes in udp_pernet_table_alloc()
RFCv2 -> v3 (Gur Stavi):
- minor fix in udp_hashslot2() and udp_table_init()
- add rcu sync in rehash4()
RFCv1 -> RFCv2:
- add a new struct for hslot2
- remove the sockopt UDP_HASH4 because it has little side effect for
unconnected sockets
- add rehash in connect()
- re-organize the patch into 3 smaller ones
- other minor fix
v8:
https://lore.kernel.org/all/20241108054836.123484-1-lulie@linux.alibaba.com/
v7:
https://lore.kernel.org/all/20241105121225.12513-1-lulie@linux.alibaba.com/
v6:
https://lore.kernel.org/all/20241031124550.20227-1-lulie@linux.alibaba.com/
v5:
https://lore.kernel.org/all/20241018114535.35712-1-lulie@linux.alibaba.com/
v4:
https://lore.kernel.org/all/20241012012918.70888-1-lulie@linux.alibaba.com/
v3:
https://lore.kernel.org/all/20241010090351.79698-1-lulie@linux.alibaba.com/
RFCv2:
https://lore.kernel.org/all/20240924110414.52618-1-lulie@linux.alibaba.com/
RFCv1:
https://lore.kernel.org/all/20240913100941.8565-1-lulie@linux.alibaba.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement ipv6 udp hash4 like that in ipv4. The major difference is that
the hash value should be calculated with udp6_ehashfn(). Besides,
ipv4-mapped ipv6 address is handled before hash() and rehash(). Export
udp_ehashfn because now we use it in udpv6 rehash.
Core procedures of hash/unhash/rehash are same as ipv4, and udpv4 and
udpv6 share the same udptable, so some functions in ipv4 hash4 can also
be shared.
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the udp_table has two hash table, the port hash and portaddr
hash. Usually for UDP servers, all sockets have the same local port and
addr, so they are all on the same hash slot within a reuseport group.
In some applications, UDP servers use connect() to manage clients. In
particular, when firstly receiving from an unseen 4 tuple, a new socket
is created and connect()ed to the remote addr:port, and then the fd is
used exclusively by the client.
Once there are connected sks in a reuseport group, udp has to score all
sks in the same hash2 slot to find the best match. This could be
inefficient with a large number of connections, resulting in high
softirq overhead.
To solve the problem, this patch implement 4-tuple hash for connected
udp sockets. During connect(), hash4 slot is updated, as well as a
corresponding counter, hash4_cnt, in hslot2. In __udp4_lib_lookup(),
hslot4 will be searched firstly if the counter is non-zero. Otherwise,
hslot2 is used like before. Note that only connected sockets enter this
hash4 path, while un-connected ones are not affected.
hlist_nulls is used for hash4, because we probably move to another hslot
wrongly when lookup with concurrent rehash. Then we check nulls at the
list end to see if we should restart lookup. Because udp does not use
SLAB_TYPESAFE_BY_RCU, we don't need to touch sk_refcnt when lookup.
Stress test results (with 1 cpu fully used) are shown below, in pps:
(1) _un-connected_ socket as server
[a] w/o hash4: 1,825176
[b] w/ hash4: 1,831750 (+0.36%)
(2) 500 _connected_ sockets as server
[c] w/o hash4: 290860 (only 16% of [a])
[d] w/ hash4: 1,889658 (+3.1% compared with [b])
With hash4, compute_score is skipped when lookup, so [d] is slightly
better than [b].
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new hash list, hash4, in udp table. It will be used to implement
4-tuple hash for connected udp sockets. This patch adds the hlist to
table, and implements helpers and the initialization. 4-tuple hash is
implemented in the following patch.
hash4 uses hlist_nulls to avoid moving wrongly onto another hlist due to
concurrent rehash, because rehash() can happen with lookup().
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Preparing for udp 4-tuple hash (uhash4 for short).
To implement uhash4 without cache line missing when lookup, hslot2 is
used to record the number of hashed sockets in hslot4. Thus adding a new
struct udp_hslot_main with field hash4_cnt, which is used by hash2. The
new struct is used to avoid doubling the size of udp_hslot.
Before uhash4 lookup, firstly checking hash4_cnt to see if there are
hashed sks in hslot4. Because hslot2 is always used in lookup, there is
no cache line miss.
Related helpers are updated, and use the helpers as possible.
uhash4 is implemented in following patches.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Gemini Lake (Goldmont Plus) is an Apollo Lake (Goldmont) derived design and
as such has the P2SB at device.function 13.0, rather then at the default
31.1, just like Apollo Lake.
At a mapping to P2SB_DEVFN_GOLDMONT to p2sb_cpu_ids[] for Goldmont Plus,
so that the correct PCI bar gets cached.
This fixes P2SB unhiding not working on these devices, which fixes
SPI support for the bootrom SPI controller not working.
Fixes: 2841631a0365 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241116154546.85761-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-11-15
1) Add support for RFC 9611 per cpu xfrm state handling.
2) Add inbound and outbound xfrm state caches to speed up
state lookups.
3) Convert xfrm to dscp_t. From Guillaume Nault.
4) Fix error handling in build_aevent.
From Everest K.C.
5) Replace strncpy with strscpy_pad in copy_to_user_auth.
From Daniel Yang.
6) Fix an uninitialized symbol during acquire state insertion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an error occurs in sysfs show callback, we should return the errno
directly instead of formatting it as the result, which produces
meaningless output and doesn't inform the userspace of the error.
Fixes: 468f96bfa3a0 ("platform/x86: panasonic-laptop: Add support for battery charging threshold (eco mode)")
Fixes: d5a81d8e864b ("platform/x86: panasonic-laptop: Add support for optical driver power in Y and W series")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241118064637.61832-3-ziyao@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Due to recent changes on the way we're maintaining media, the
location of the main tree was updated.
Change docs accordingly.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
There were some recent changes on the way we're handling
media patches. Now, the official tree is located at:
https://git.linuxtv.org/media.git/
Update it at MAINTAINERS file.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
syzbot reported a WARNING in iomap_iter_done:
iomap_fiemap+0x73b/0x9b0 fs/iomap/fiemap.c:80
ioctl_fiemap fs/ioctl.c:220 [inline]
Generally, NONHEAD lclusters won't have delta[1]==0, except for crafted
images and filesystems created by pre-1.0 mkfs versions.
Previously, it would immediately bail out if delta[1]==0, which led to
inadequate decompressed lengths (thus FIEMAP is impacted). Treat it as
delta[1]=1 to work around these legacy mkfs versions.
`lclusterbits > 14` is illegal for compact indexes, error out too.
Reported-by: syzbot+6c0b301317aa0156f9eb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/67373c0c.050a0220.2a2fcc.0079.GAE@google.com
Tested-by: syzbot+6c0b301317aa0156f9eb@syzkaller.appspotmail.com
Fixes: d95ae5e25326 ("erofs: add support for the full decompressed length")
Fixes: 001b8ccd0650 ("erofs: fix compact 4B support for 16k block size")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241115173651.3339514-1-hsiangkao@linux.alibaba.com
|
|
Currently, only filesystems backed by block devices support direct I/O.
Also remove the unnecessary strict checks that can be supported with iomap.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241115074625.2520728-1-hsiangkao@linux.alibaba.com
|
|
Adjust sb->s_blocksize{,_bits} directly for file-backed
mounts when the fs block size is smaller than PAGE_SIZE.
Previously, EROFS used sb_set_blocksize(), which caused
a panic if bdev-backed mounts is not used.
Fixes: fb176750266a ("erofs: add file-backed mount support")
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241015103836.3757438-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
After commit 927e5010ff5b ("erofs: use kmap_local_page() only for
erofs_bread()"), `buf->kmap_type` actually has no use at all.
Let's get rid of `buf->kmap_type` now.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241114095813.839866-1-hsiangkao@linux.alibaba.com
|
|
syzbot reported a null-ptr-deref in fuse_read_args_fill:
fuse_read_folio+0xb0/0x100 fs/fuse/file.c:905
filemap_read_folio+0xc6/0x2a0 mm/filemap.c:2367
do_read_cache_folio+0x263/0x5c0 mm/filemap.c:3825
read_mapping_folio include/linux/pagemap.h:1011 [inline]
erofs_bread+0x34d/0x7e0 fs/erofs/data.c:41
erofs_read_superblock fs/erofs/super.c:281 [inline]
erofs_fc_fill_super+0x2b9/0x2500 fs/erofs/super.c:625
Unlike most filesystems, some network filesystems and FUSE need
unavoidable valid `file` pointers for their read I/Os [1].
Anyway, those use cases need to be supported too.
[1] https://docs.kernel.org/filesystems/vfs.html
Reported-by: syzbot+0b1279812c46e48bb0c1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6727bbdf.050a0220.3c8d68.0a7e.GAE@google.com
Fixes: fb176750266a ("erofs: add file-backed mount support")
Tested-by: syzbot+0b1279812c46e48bb0c1@syzkaller.appspotmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241114234905.1873723-1-hsiangkao@linux.alibaba.com
|
|
Use printk instead of pr_info/err to reduce
redundant code.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241114013247.30821-1-gouhao@uniontech.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Add a sysfs node to drop compression-related caches, currently used to
drop in-memory pclusters and cached compressed folios.
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241113041148.749129-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Once a pcluster is fully decompressed and there are no attached cached
folios, its corresponding `struct z_erofs_pcluster` will be freed. This
will significantly reduce the frequency of calls to erofs_shrink_scan()
and the memory allocated for `struct z_erofs_pcluster`.
The tables below show approximately a 96% reduction in the calls to
erofs_shrink_scan() and in the memory allocated for `struct
z_erofs_pcluster` after applying this patch. The results were obtained
by performing a test to copy a 4.1GB partition on ARM64 Android devices
running the 6.6 kernel with an 8-core CPU and 12GB of memory.
1. The reduction in calls to erofs_shrink_scan():
+-----------------+-----------+----------+---------+
| | w/o patch | w/ patch | diff |
+-----------------+-----------+----------+---------+
| Average (times) | 11390 | 390 | -96.57% |
+-----------------+-----------+----------+---------+
2. The reduction in memory released by erofs_shrink_scan():
+-----------------+-----------+----------+---------+
| | w/o patch | w/ patch | diff |
+-----------------+-----------+----------+---------+
| Average (Byte) | 133612656 | 4434552 | -96.68% |
+-----------------+-----------+----------+---------+
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241112043235.546164-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
`struct erofs_workgroup` was introduced to provide a unique header
for all physically indexed objects. However, after big pclusters and
shared pclusters are implemented upstream, it seems that all EROFS
encoded data (which requires transformation) can be represented with
`struct z_erofs_pcluster` directly.
Move all members into `struct z_erofs_pcluster` for simplicity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241021035323.3280682-3-hsiangkao@linux.alibaba.com
|
|
Move related helpers into zdata.c as an intermediate step of getting
rid of `struct erofs_workgroup`, and rename:
erofs_workgroup_put => z_erofs_put_pcluster
erofs_workgroup_get => z_erofs_get_pcluster
erofs_try_to_release_workgroup => erofs_try_to_release_pcluster
erofs_shrink_workstation => z_erofs_shrink_scan
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241021035323.3280682-2-hsiangkao@linux.alibaba.com
|
|
Just fold them into the only two callers since
they are simple enough.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241021035323.3280682-1-hsiangkao@linux.alibaba.com
|
|
Support for Tegra234 was added to the tegra186 driver in 1db9b241bb56 (
"gpio: tegra186: Add support for Tegra234"). But the driver is not
selectable on Tegra234. Update the Kconfig entry to allow the driver to be
enabled on Tegra234.
Enable the driver by default on Tegra 234 as well, similar to the other
platforms it supports.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241113162939.886242-1-lars@metafoo.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in grgpio_probe is not checked.
Add NULL check in grgpio_probe, to handle kernel NULL
pointer dereference error.
Cc: stable@vger.kernel.org
Fixes: 7eb6ce2f2723 ("gpio: Convert to using %pOF instead of full_name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20241114091822.78199-1-hanchunchao@inspur.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
* edac-misc:
MAINTAINERS: Change FSL DDR EDAC maintainership
RAS/AMD/ATL: Add debug prints for DF register reads
EDAC/bluefield: Use Arm SMC for EMI access on BlueField-2
EDAC/bluefield: Fix potential integer overflow
EDAC/igen6: Add Intel Panther Lake-H SoCs support
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.13, part 1
Major Improvements and Refactoring:
- All controllers using the 'remove_new' callback have been
reverted to use the 'remove' callback.
- Intel SCH controller underwent significant refactoring,
this brings love and a modern look to the driver.
- PIIX4 driver refactored to enable usage by other drivers
(e.g., AMD ASF).
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms
to achieve this.
- ACPI documentation for PIIX4.
New Features:
- i2c-cadence added support for atomic transfers.
- Qualcomm CII added support for a 32MHz serial engine clock.
Deprecated Features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New Hardware Support:
- Added support for:
- Intel Panther Lake (new ID)
- AMD ASF (new driver)
- S32G2/S32G3 SoCs (new ID)
- Realtek RTL I2C Controller (new driver)
- HJMC01 DesignWare ACPI HID (new ID)
- PIC64GX to Microchip Core (new ID)
- Qualcomm SDM670 to Qualcomm CCI (new ID)
|
|
Add myself as co-maintainer for the UVC driver.
Link: https://lore.kernel.org/linux-media/20241116113855.50976-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Comply with bindings guidelines and get rid of errors such as:
cpufreq@18323000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,cpufreq-hw'] is too short
Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add a SoC-specific compatible for SC8180X. It has 2 domains and uses
the older, non-EPSS hardware.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Customers have reported use-after-free in @ses->auth_key.response with
SMB2.1 + sign mounts which occurs due to following race:
task A task B
cifs_mount()
dfs_mount_share()
get_session()
cifs_mount_get_session() cifs_send_recv()
cifs_get_smb_ses() compound_send_recv()
cifs_setup_session() smb2_setup_request()
kfree_sensitive() smb2_calc_signature()
crypto_shash_setkey() *UAF*
Fix this by ensuring that we have a valid @ses->auth_key.response by
checking whether @ses->ses_status is SES_GOOD or SES_EXITING with
@ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF
in smb2_reconnect_server()"), we made sure to call ->logoff() only
when @ses was known to be good (e.g. valid ->auth_key.response), so
it's safe to access signing key when @ses->ses_status == SES_EXITING.
Cc: stable@vger.kernel.org
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Like commit f1f047bd7ce0 ("smb: client: Fix -Wstringop-overflow issues"),
adjust the memcpy() destination address to be based off the surrounding
object rather than based off the 4-byte "Protocol" member. This avoids a
build-time warning when compiling under CONFIG_FORTIFY_SOURCE with GCC 15:
In function 'fortify_memcpy_chk',
inlined from 'CIFSSMBSetPathInfo' at ../fs/smb/client/cifssmb.c:5358:2:
../include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
571 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
CIFSSMBCopy() is unused, remove it.
It seems to have been that way pre-git; looking in a historic
archive, I think it landed around May 2004 in Linus'
BKrev: 40ab7591J_OgkpHW-qhzZukvAUAw9g
and was unused back then.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix a NULL pointer deref (Everest K.C.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZzcsMT_FEqBE0cAW@fedora
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.13-2024-11-15:
amdgpu:
- Parition fixes
- GFX 12 fixes
- SR-IOV fixes
- MES fixes
- RAS fixes
- GC queue handling fixes
- VCN fixes
- Add sysfs reset masks
- Better error messages for P2P failurs
- SMU fixes
- Documentation updates
- GFX11 enforce isolation updates
- Display HPD fixes
- PSR fixes
- Panel replay fixes
- DP MST fixes
- USB4 fixes
- Misc display fixes and cleanups
- VRAM handling fix for APUs
- NBIO fix
amdkfd:
- INIT_WORK fix
- Refcount fix
- KFD MES scheduling fixes
drm/fourcc:
- Add missing tiling mode
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241115165012.573465-1-alexander.deucher@amd.com
|
|
|
