summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-21ipvs: stop ICMP from FORWARD to localJulian Anastasov
Delivering locally ICMP from FORWARD hook is not supported. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21ipvs: do not schedule conns from real serversJulian Anastasov
This patch is needed to avoid scheduling of packets from local real server when we add ip_vs_in in LOCAL_OUT hook to support local client. Currently, when ip_vs_in can not find existing connection it tries to create new one by calling ip_vs_schedule. The default indication from ip_vs_schedule was if connection was scheduled to real server. If real server is not available we try to use the bypass forwarding method or to send ICMP error. But in some cases we do not want to use the bypass feature. So, add flag 'ignored' to indicate if the scheduler ignores this packet. Make sure we do not create new connections from replies. We can hit this problem for persistent services and local real server when ip_vs_in is added to LOCAL_OUT hook to handle local clients. Also, make sure ip_vs_schedule ignores SYN packets for Active FTP DATA from local real server. The FTP DATA connection should be created on SYN+ACK from client to assign correct connection daddr. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21ipvs: switch to notrack modeJulian Anastasov
Change skb->ipvs_property semantic. This is preparation to support ip_vs_out processing in LOCAL_OUT. ipvs_property=1 will be used to avoid expensive lookups for traffic sent by transmitters. Now when conntrack support is not used we call ip_vs_notrack method to avoid problems in OUTPUT and POST_ROUTING hooks instead of exiting POST_ROUTING as before. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21ipvs: optimize checksums for appsJulian Anastasov
Avoid full checksum calculation for apps that can provide info whether csum was broken after payload mangling. For now only ip_vs_ftp mangles payload and it updates the csum, so the full recalculation is avoided for all packets. Add CHECKSUM_UNNECESSARY for snat_handler (TCP and UDP). It is needed to support SNAT from local address for the case when csum is fully recalculated. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21ipvs: fix CHECKSUM_PARTIAL for TCP, UDPJulian Anastasov
Fix CHECKSUM_PARTIAL handling. Tested for IPv4 TCP, UDP not tested because it needs network card with HW CSUM support. May be fixes problem where IPVS can not be used in virtual boxes. Problem appears with DNAT to local address when the local stack sends reply in CHECKSUM_PARTIAL mode. Fix tcp_dnat_handler and udp_dnat_handler to provide vaddr and daddr in right order (old and new IP) when calling tcp_partial_csum_update/udp_partial_csum_update (CHECKSUM_PARTIAL). Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21r8169: print errors when dma mapping failStanislaw Gruszka
If dma mapping fail we are dropping packages or fail to open device. But exact reason of drop/fail stays unknow for a user, so print errors. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: (re)init phy on resumeStanislaw Gruszka
Fix switching device to low-speed mode after resume reported in: https://bugzilla.redhat.com/show_bug.cgi?id=502974 Reported-and-tested-by: Laurentiu Badea <bugzilla-redhat@wotevah.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: changing mtu clean upStanislaw Gruszka
Since we do not change rx buffer size any longer, we can clean up rtl8169_change_mtu and in consequence rtl8169_down. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: do not account fragments as packetsStanislaw Gruszka
Only increase tx_{packets,dropped} statistics when transmit or drop full skb, not just fragment. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: use pointer to struct device as local variableStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: replace PCI_DMA_{TO,FROM}DEVICE to DMA_{TO,FROM}_DEVICEStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: init rx ring cleanupStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: check dma mapping failuresStanislaw Gruszka
Check possible dma mapping errors and do clean up if it happens. Fix overwrap bug in rtl8169_tx_clear on the way. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21block: Turn bvec_k{un,}map_irq() into static inline functionsGeert Uytterhoeven
Convert bvec_k{un,}map_irq() from macros to static inline functions if !CONFIG_HIGHMEM, so we can easier detect mistakes like the one fixed in 93055c31045a2d5599ec613a0c6cdcefc481a460 ("ps3disk: passing wrong variable = to bvec_kunmap_irq()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-21bnx2x: Update bnx2x to use new vlan accleration.Hao Zheng
Make the bnx2x driver use the new vlan accleration model. Signed-off-by: Hao Zheng <hzheng@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ixgbe: Update ixgbe to use new vlan accleration.Jesse Gross
Make the ixgbe driver use the new vlan accleration model. Signed-off-by: Jesse Gross <jesse@nicira.com> CC: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com> CC: Emil Tantilov <emil.s.tantilov@intel.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bnx2: Update bnx2 to use new vlan accleration.Jesse Gross
Make the bnx2 driver use the new vlan accleration model. Signed-off-by: Jesse Gross <jesse@nicira.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bridge: Add support for TX vlan offload.Jesse Gross
If some of the underlying devices support it, enable vlan offload on transmit for bridge devices. This allows senders to take advantage of the hardware support, similar to other forms of acceleration. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ethtool: Add support for vlan accleration.Jesse Gross
Now that vlan acceleration is handled consistently regardless of usage, it is possible to enable and disable it at will. This adds support for Ethtool operations that change the offloading status for debugging purposes, similar to other forms of hardware acceleration. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Centralize handling of hardware acceleration.Jesse Gross
Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Avoid hash table lookup to find group.Jesse Gross
A struct net_device always maps to zero or one vlan groups and we always know the device when we are looking up a group. We currently do a hash table lookup on the device to find the group but it is much simpler to just store a pointer. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Enable software emulation for vlan accleration.Jesse Gross
Currently users of hardware vlan accleration need to know whether the device supports it before generating packets. However, vlan acceleration will soon be available in a more flexible manner so knowing ahead of time becomes much more difficult. This adds a software fallback path for vlan packets on devices without the necessary offloading support, similar to other types of hardware accleration. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ebtables: Allow filtering of hardware accelerated vlan frames.Jesse Gross
An upcoming commit will allow packets with hardware vlan acceleration information to be passed though more parts of the network stack, including packets trunked through the bridge. This adds support for matching and filtering those packets through ebtables. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Fix log messageVasanthy Kolluri
Fix a log message Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Change min MTUVasanthy Kolluri
Change min MTU to 68. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Replace firmware devcmd CMD_ENABLE with CMD_ENABLE_WAITVasanthy Kolluri
Replace no wait CMD_ENABLE firmware devcmd with CMD_ENABLE_WAIT Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Make firmware cognizant of the user set mac addressVasanthy Kolluri
Let the firmware know about the mac address set by the user using ndo_set_mac_address Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Add support for multiple hardware receive queuesVasanthy Kolluri
Add support for multiple hardware receive queues. The ingress traffic is hashed into one of the receive queues based on IP or TCP or both headers. The max no. of receive queues supported is 8. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ibmveth: Free irq on error pathDenis Kirjanov
Free irq on error path. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ibmveth: Cleanup error handling inside ibmveth_openDenis Kirjanov
Remove duplicated code in one place. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21UBI: tighten the corrupted PEB criteriaArtem Bityutskiy
If we get a bit-flip of ECC error while reading the data area, do not add it to corrupted list, because it is possible that this is just unstable PEB with corruptions caused by unclean reboots. This patch also improves commentaries. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-10-21UBI: fix check_data_ff return codeArtem Bityutskiy
When the data does not contain all 0xFF bytes, 'check_data_ff()' should return 1, not -EINVAL; Also, the caller ('process_eb()') should not add the PEB to the "corrupted" list if there was a read error. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-10-21UBI: remember copy_flag while scanningArtem Bityutskiy
While scanning the flash we read all VID headers and store some important information in 'struct ubi_scan_leb'. Store also the 'copy_flag' value there as it is needed when comparing LEBs. We do not increase memory consumption because this is just one bit and we have plenty of spare bits in 'struct ubi_scan_leb' (sizeof(struct ubi_scan_leb) is 48 both with and without this patch). Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-10-21UBIFS: do not allocate unneeded scan bufferArtem Bityutskiy
In 'ubifs_replay_journal()' we allocate 'sbuf' for scanning the log. However, we already have 'c->sbuf' for these purposes, so do not allocate yet another one. This reduces UBIFS memory consumption while recovering. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-10-21UBIFS: do not forget to cancel timersArtem Bityutskiy
This is a bug-fix: when we unmount, and we are currently in R/O mode because of an error - we do not sync write-buffers, which means we also do not cancel write-buffer timers we may possibly have armed. This patch fixes the issue. The issue can easily be reproduced by enabling UBIFS failure debug mode (echo 4 > /sys/module/ubifs/parameters/debug_tsts) and unmounting as soon as a failure happen. At some point the system oopses because we have an armed hrtimer but UBIFS is unmounted already. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-10-21UBIFS: remove a bit of unneeded codeArtem Bityutskiy
This is a clean-up patch which: 1. Removes explicite 'hrtimer_cancel()' after 'ubifs_wbuf_sync()' in 'ubifs_remount_ro()', because the timers will be canceled by 'ubifs_wbuf_sync()', no need to cancel them for the second time. 2. Remove "if (c->jheads)" check from 'ubifs_put_super()', because at journal heads must always be allocated there, since we checked earlier that we were mounted R/W, and the olny situation when journal heads are not allocated is when mounter or re-mounted R/O. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-10-21Merge branch 'vhost-net' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-10-21Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6
2010-10-21Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2010-10-21x86-32, percpu: Correct the ordering of the percpu readmostly sectionH. Peter Anvin
Checkin c957ef2c59e952803766ddc22e89981ab534606f had inconsistent ordering of .data..percpu..page_aligned and .data..percpu..readmostly; the still-broken version affected x86-32 at least. The page aligned version really must be page aligned... Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <1287544022.4571.7.camel@sli10-conroe.sh.intel.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com>
2010-10-21virtio_blk: remove BKL leftoversChristoph Hellwig
Remove the BKL usage added in "block: push down BKL into .locked_ioctl". Virtio-blk doesn't use the BKL for anything, and doesn't implement any ioctl command by itself, but only uses the generic scsi_cmd_ioctl which is fine without the BKL. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-10-21virtio: console: Disable lseek(2) for port file operationsAmit Shah
The ports are char devices; do not have seeking capabilities. Calling nonseekable_open() from the fops_open() call and setting the llseek fops pointer to no_llseek ensures an lseek() call from userspace returns -ESPIPE. Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-10-21virtio: console: Send SIGIO in case of port unplugAmit Shah
If a port has registered for SIGIO signals, let the application know that the port is getting unplugged. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-10-21virtio: console: Send SIGIO on new data arrival on portsAmit Shah
Send a SIGIO signal when new data arrives on a port. This is sent only when the process has requested for the signal to be sent using fcntl(). Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-10-21virtio: console: Send SIGIO to processes that request it for host eventsAmit Shah
A process can request for SIGIO on host connect / disconnect events using the O_ASYNC file flag using fcntl(). If that's requested, and if the guest-side connection for the port is open, any host-side open/close events for that port will raise a SIGIO. The process can then use poll() within the signal handler to find out which port triggered the signal. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-10-21virtio: console: Reference counting portdev structs is not neededAmit Shah
Explain in a comment why there's no need to reference-count the portdev struct: when a device is yanked out, we can't do anything more with it anyway so just give up doing anything more with the data or the vqs and exit cleanly. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-10-21virtio: console: Add reference counting for port structAmit Shah
When a port got hot-unplugged, when a port was open, any file operation after the unplugging resulted in a crash. This is fixed by ref-counting the port structure, and releasing it only when the file is closed. This splits the unplug operation in two parts: first marks the port as unavailable, removes all the buffers in the vqs and removes the port from the per-device list of ports. The second stage, invoked when all references drop to zero, releases the chardev and frees all other memory. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-10-21virtio: console: Use cdev_alloc() instead of cdev_init()Amit Shah
This moves to using cdev on the heap instead of it being embedded in the ports struct. This helps individual refcounting and will allow us to properly remove cdev structs after hot-unplugs and close operations. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generated by cgit (git 2.34.1) at 2025-09-18 00:25:48 +0000