summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-09ARM: pxa: moved pxa27x_keypad.h to platform pxa directoryMark F. Brown
mach-mmp utilizes pxa27x_keypad code so we need to move header to platform pxa directory. Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08Merge branch 'msi-dmi' into releaseLen Brown
2010-10-08Merge branch 'pdc-regression' into releaseLen Brown
2010-10-08intel_idle: enable Atom C6Len Brown
ATM-C6 was commented out, pending public documentation. https://bugzilla.kernel.org/show_bug.cgi?id=19762 Tested-by: Dennis Jansen <Dennis.Jansen@...> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-08[SCSI] st: add MTWEOFI to write filemarks without flushing drive bufferKai Makisara
This patch adds a new MTIOCTOP operation MTWEOFI that writes filemarks with immediate bit set. This means that the drive does not flush its buffer and the next file can be started immediately. This speeds up writing in applications that have to write multiple small files. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-08msm: Platform data for msm8x60 IOMMUsStepan Moskovchenko
Add the platform data for the IOMMUs found on the Qualcomm msm8x60 SoC. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: Platform initialization for the IOMMU driverStepan Moskovchenko
Register a driver for the MSM IOMMU devices and a driver for the translation context devices. Set up the global IOMMU registers and initialize the context banks. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: Add MSM IOMMU supportStepan Moskovchenko
Add support for the IOMMUs found on the upcoming Qualcomm MSM8x60 chips. These IOMMUs allow virtualization of the address space used by most of the multimedia cores on these chips. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: add MSM8x60 FFA supportGregory Bean
The MSM8X60 FFA contains different components than the MSM8X60 SURF, and therefore requires a different ARCH type and machine ID. Signed-off-by: Gregory Bean <gbean@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: MSM8X60 simulator board supportSteve Muckle
Board configuration for MSM8X60 simulation. Signed-off-by: Steve Muckle <smuckle@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: add msm8x60_surf machineSteve Muckle
Signed-off-by: Steve Muckle <smuckle@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: physical offset for MSM8X60Jeff Ohlstein
The MSM8x60 has a different physical memory offset than other targets. Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: 8x60: setup correct handlers for private interruptsAbhijeet Dharmapurikar
Private Peripheral interrupts could be edge triggered or level triggered depending on the platform. Initialize handlers for these in board file. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: add build support for msm8x60 targetJeff Ohlstein
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: allow uart to be conditionally disabledDaniel Walker
Some MSM targets don't select the debug UART in this way. For those we need to disable this selection mechanism. Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: dma: add stub functions for dma features not yet present on 8x60Daniel Walker
Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: clock: add dummy clock driverJeff Ohlstein
Need to add this until real clock support for 8x60 goes in, or else some drivers won't compile. Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: 8x60: gic initialization fixup for RUMISteve Muckle
On RUMI platform STIs are not enabled by default, contrary to the GIC spec. The bits for STIs in the enable/enable clear registers are also RW instead of RO. STIs need to be enabled at initialization time. Signed-off-by: Steve Muckle <smuckle@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: irq: rename existing entry-macro to entry-macro-vicSteve Muckle
The existing MSM irq entry macro is specific to a VIC implementation. Renaming this makes room for irq support based on other interrupt controllers. Signed-off-by: Steve Muckle <smuckle@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: MSM8X60 RUMI3 board supportSteve Muckle
Board configuration for MSM8X60 emulation on RUMI3. Signed-off-by: Steve Muckle <smuckle@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: timer: support 8x60 timersJeff Ohlstein
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: irqs-8x60: interrupt mapAbhijeet Dharmapurikar
Define the interrupt map in irq-8x60.h Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: initial irq definitions for MSM8X60Steve Muckle
IRQ assignments are different for MSM8X60 than other existing MSMs. Signed-off-by: Steve Muckle <smuckle@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: io: MSM8X60 io supportSteve Muckle
MSM8X60 has different IO mappings than previous MSMs. Signed-off-by: Steve Muckle <smuckle@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08msm: create config option for proc-commSteve Muckle
Some builds may not support the proc-comm interface with the baseband processor. Signed-off-by: Steve Muckle <smuckle@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08net: Fix rxq ref countingTom Herbert
The rx->count reference is used to track reference counts to the number of rx-queue kobjects created for the device. This patch eliminates initialization of the counter in netif_alloc_rx_queues and instead increments the counter each time a kobject is created. This is now symmetric with the decrement that is done when an object is released. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Phonet: mark the pipe controller as EXPERIMENTALRémi Denis-Courmont
There are a bunch of issues that need to be fixed, including: - GFP_KERNEL allocations from atomic context (and GFP_ATOMIC in process context), - abuse of the setsockopt() call convention, - unprotected/unlocked static variables... IMHO, we will need to alter the userspace ABI when we fix it. So mark the configuration option as EXPERIMENTAL for the time being (or should it be BROKEN instead?). Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Phonet: cleanup pipe enable socket optionRémi Denis-Courmont
The current code works like this: int garbage, status; socklen_t len = sizeof(status); /* enable pipe */ setsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &garbage, sizeof(garbage)); /* disable pipe */ setsockopt(fd, SOL_PNPIPE, PNPIPE_DISABLE, &garbage, sizeof(garbage)); /* get status */ getsockopt(fd, SOL_PNPIPE, PNPIPE_INQ, &status, &len); ...which does not follow the usual socket option pattern. This patch merges all three "options" into a single gettable&settable option, before Linux 2.6.37 gets out: int status; socklen_t len = sizeof(status); /* enable pipe */ status = 1; setsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &status, sizeof(status)); /* disable pipe */ status = 0; setsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &status, sizeof(status)); /* get status */ getsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &status, &len); This also fixes the error code from EFAULT to ENOTCONN. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Cc: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Phonet: advise against enabling the pipe controllerRémi Denis-Courmont
As it currently is, the new code path is not compatible with existing Nokia modems. This would break existing userspace for Nokia modem, such as the existing oFono ISI driver. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Phonet: add to MAINTAINERS and add myselfRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08[SCSI] libsas: Don't issue commands to devices that have been hot-removedDarrick J. Wong
sd will get hung up issuing commands to flush write cache if a SAS device behind the expander is unplugged without warning. Change libsas to reject commands to domain devices that have already gone away. [maciej.trela@intel.com: removed setting ->gone in sas_deform_port() to permit sync cache commands at module removal] Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Tested-by: Haipao Fan <haipao.fan@intel.com> Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-08qlcnic: update driver version 5.0.11Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: change all P3 references to P3PSritej Velaga
This patch just rename all P3 #define to P3P. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: fix promiscous mode for VFRajesh Borundia
o Allow promiscous mode setting for VF's depending upon the configuration. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: fix board descriptionSritej Velaga
Remove "Flex-10" from board description. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: remove private LRO flagAmit Kumar Salecha
LRO was not getting enable after interface down/up. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: support quiescent modeAmit Kumar Salecha
Put device in quiescent mode during internal loopback test. Before running test, set state to NEED_QUISCENT. After getting ack from all function, change state to QUISCENT and perform test. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: driver private workqueueAmit Kumar Salecha
Currently fw recovery usage global workqueue. As same workqueue used by kernel for ethtool and etc., supporting quiescent mode is not possible, without driver private workqueue. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-10-08x86, iommu: Update header comments with appropriate namingKonrad Rzeszutek Wilk
The header comments diverged a bit from the implementation. Lets re-sync them. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1286564028-2352-3-git-send-email-konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-08ia64, iommu: Add a dummy iommu_table.h file in IA64.Konrad Rzeszutek Wilk
We don't need a complex IOMMU dependency list on IA64 so we just define the IOMMU_* macro which is used the DMAR driver, as a dummy. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1286564028-2352-2-git-send-email-konrad.wilk@oracle.com> Reported-by: Tony Luck <tony.luck@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ipw2x00/ipw2200.c
2010-10-08spi/topcliff: Add topcliff platform controller hub (PCH) spi bus driverMasayuki Ohtake
Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platform. All IO peripherals in Topcliff PCH are actually devices sitting on AMBA bus. This patch adds a driver for the SPI bus integrated into the Topcliff device. Signed-off-by: Masayuki Ohtake <masa-korg@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-08ipv4: Remove leftover rcu_read_unlock calls from __mkroute_output()Dimitris Michailidis
Commit "fib: RCU conversion of fib_lookup()" removed rcu_read_lock() from __mkroute_output but left a couple of calls to rcu_read_unlock() in there. This causes lockdep to complain that the rcu_read_unlock() call in __ip_route_output_key causes a lock inbalance and quickly crashes the kernel. The below fixes this for me. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08net: clear heap allocation for ETHTOOL_GRXCLSRLALLKees Cook
Calling ETHTOOL_GRXCLSRLALL with a large rule_cnt will allocate kernel heap without clearing it. For the one driver (niu) that implements it, it will leave the unused portion of heap unchanged and copy the full contents back to userspace. Signed-off-by: Kees Cook <kees.cook@canonical.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-08sfc: Don't try to set filters with search depths we know won't workBen Hutchings
The filter engine will time-out and ignore filters beyond 200-something hops. We also need to avoid infinite loops in efx_filter_search() when the table is full. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08net: Update kernel-doc for netif_set_real_num_rx_queues()Ben Hutchings
Synchronise the comment with the preceding implementation change. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08isdn: strcpy() => strlcpy()Dan Carpenter
setup.phone and setup.eazmsn are 32 character buffers. rcvmsg.msg_data.byte_array is a 48 character buffer. sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn is 50 chars. The rcvmsg struct comes from the memcpy_fromio() in receivemessage(). I guess that means it's data off the wire. I'm not very familiar with this code but I don't see any reason to assume these strings are NULL terminated. Also it's weird that "dn" in a 50 character buffer but we only seem to use 32 characters. In drivers/isdn/sc/scioc.h, "dn" is only a 49 character buffer. So potentially there is still an issue there. The important thing for now is to prevent the memory corruption. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08cifs: initialize tlink_tree_lock and tlink_treeJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-24 16:21:15 +0000