summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-25perf bpf: Add bpf_map() helperArnaldo Carvalho de Melo
To make the declaration of maps more compact, the following patches will make use of it. Standardizing on it will allow to add the BTF details, i.e. BPF_ANNOTATE_KV_PAIR() (tools/testing/selftests/bpf/bpf_helpers.h) transparently. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yonghong Song <yhs@fb.com> Link: https://lkml.kernel.org/n/tip-h3q9rxxkbzetgnbro5rclqft@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf script python: Add Python3 support to tests/attr.pyTony Jones
Support both Python 2 and Python 3 in tests/attr.py The use of "except as" syntax implies the minimum supported Python2 version is now v2.6 Committer testing: $ make -C tools/perf PYTHON3=python install-bin Before: # perf test attr 16: Setup struct perf_event_attr : FAILED! 48: Synthesize attr update : Ok [root@quaco ~]# perf test -v attr 16: Setup struct perf_event_attr : --- start --- test child forked, pid 3121 File "/home/acme/libexec/perf-core/tests/attr.py", line 324 except Unsup, obj: ^ SyntaxError: invalid syntax test child finished with -1 ---- end ---- Setup struct perf_event_attr: FAILED! 48: Synthesize attr update : --- start --- test child forked, pid 3124 test child finished with 0 ---- end ---- Synthesize attr update: Ok # After: # perf test attr 16: Setup struct perf_event_attr : Ok 48: Synthesize attr update : Ok # Signed-off-by: Tony Jones <tonyj@suse.de> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf script python: Remove explicit shebang from Python scriptsTony Jones
The scripts in scripts/python are intended to be run from 'perf script' and the Python version used is dictated by how perf was built (PYTHON=). Also most distros follow pep-0394 which recommends that /usr/bin/python refer to Python2 and so may not exist on the system (if PYTHON=python3). - Remove the explicit shebang - Install the scripts as mode 644 Signed-off-by: Tony Jones <tonyj@suse.de> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190124005229.16146-6-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf script python: Remove explicit shebang from tests/attr.cTony Jones
tests/attr.c invokes attr.py via an explicit invocation of Python ($PYTHON) so there is therefore no need for an explicit shebang. Also most distros follow pep-0394 which recommends that /usr/bin/python refer only to v2 and so may not exist on the system (if PYTHON=python3). Signed-off-by: Tony Jones <tonyj@suse.de> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190124005229.16146-5-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf script python: Remove explicit shebang from setup.pyTony Jones
Makefile.perf invokes setup.py via an explicit invocation of python (PYTHON_WORD) so there is therefore no need for an explicit shebang. Also most distros follow pep-0394 which recommends that /usr/bin/python refer only to v2 and so may not exist on the system (if PYTHON=python3). Signed-off-by: Tony Jones <tonyj@suse.de> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190124005229.16146-4-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf script python: Use PyBytes for attr in trace-event-pythonTony Jones
With Python3. PyUnicode_FromStringAndSize is unsafe to call on attr and will return NULL. Use _PyBytes_FromStringAndSize (as with raw_buf). Below is the observed behavior without the fix. Note it is first necessary to apply the prior fix (Add trace_context extension module to sys,modules): # ldd /usr/bin/perf | grep -i python libpython3.6m.so.1.0 => /usr/lib64/libpython3.6m.so.1.0 (0x00007f8e1dfb2000) # perf record -e raw_syscalls:sys_enter /bin/false [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.018 MB perf.data (21 samples) ] # perf script -g python | cat generated Python script: perf-script.py # perf script -s ./perf-script.py in trace_begin Segmentation fault (core dumped) Signed-off-by: Tony Jones <tonyj@suse.de> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jaroslav Škarvada <jskarvad@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Fixes: 66dfdff03d19 ("perf tools: Add Python 3 support") Link: http://lkml.kernel.org/r/20190124005229.16146-3-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf script python: Add trace_context extension module to sys.modulesTony Jones
In Python3, the result of PyModule_Create (called from scripts/python/Perf-Trace-Util/Context.c) is not automatically added to sys.modules. See: https://bugs.python.org/issue4592 Below is the observed behavior without the fix: # ldd /usr/bin/perf | grep -i python libpython3.6m.so.1.0 => /usr/lib64/libpython3.6m.so.1.0 (0x00007f8e1dfb2000) # perf record /bin/false [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.015 MB perf.data (17 samples) ] # perf script -g python | cat generated Python script: perf-script.py # perf script -s ./perf-script.py Traceback (most recent call last): File "./perf-script.py", line 18, in <module> from perf_trace_context import * ModuleNotFoundError: No module named 'perf_trace_context' Error running python script ./perf-script.py # Committer notes: To build with python3 use: $ make -C tools/perf PYTHON=python3 Use a non-const variable to pass the 'name' arg to PyImport_AppendInittab(), as python2.6 has that as 'char *', which ends up trowing this in some environments: CC /tmp/build/perf/util/parse-branch-options.o util/scripting-engines/trace-event-python.c: In function 'python_start_script': util/scripting-engines/trace-event-python.c:1520:2: error: passing argument 1 of 'PyImport_AppendInittab' discards 'const' qualifier from pointer target type [-Werror] PyImport_AppendInittab("perf_trace_context", initfunc); ^ In file included from /usr/include/python2.6/Python.h:130:0, from util/scripting-engines/trace-event-python.c:22: /usr/include/python2.6/import.h:54:17: note: expected 'char *' but argument is of type 'const char *' PyAPI_FUNC(int) PyImport_AppendInittab(char *name, void (*initfunc)(void)); ^ cc1: all warnings being treated as errors Signed-off-by: Tony Jones <tonyj@suse.de> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jaroslav Škarvada <jskarvad@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Fixes: 66dfdff03d19 ("perf tools: Add Python 3 support") Link: http://lkml.kernel.org/r/20190124005229.16146-2-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf bpf: Fix synthesized PERF_RECORD_KSYMBOL/BPF_EVENTSong Liu
Added missing machine->id_hdr_size to event->header.size. Also fixed size of PERF_RECORD_KSYMBOL by removing extra bytes for name. Committer notes: We need to malloc that extra machine->id_hdr_size at the start of perf_event__synthesize_bpf_events() and also need to cast the event to (void *) otherwise we segfault, fix it. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Fixes: 7b612e291a5a ("perf tools: Synthesize PERF_RECORD_* for loaded BPF programs") Link: http://lkml.kernel.org/r/20190122210218.358664-1-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf sched: Use cached rbtreesDavidlohr Bueso
At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something heavily required for perf-sched. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-8-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf hist: Use cached rbtreesDavidlohr Bueso
At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something heavily required for histograms. Specifically, the following are converted to rb_root_cached, and users accordingly: hist::entries_in_array hist::entries_in hist::entries hist::entries_collapsed hist_entry::hroot_in hist_entry::hroot_out Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-7-dave@stgolabs.net [ Added some missing conversions to rb_first_cached() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf symbols: Use cached rbtreesDavidlohr Bueso
At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node). Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-6-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf util: Use cached rbtree for rblistsDavidlohr Bueso
At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something required for any of the strlist or intlist traversals (XXX_for_each_entry()). There are a number of users in perf of these (particularly strlists), including probes, and buildid. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-5-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf callchain: Use cached rbtreesDavidlohr Bueso
At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something required for nearly every in/srcline callchain node deletion (in/srcline__tree_delete()). Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-4-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf machine: Use cached rbtreesDavidlohr Bueso
At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something required for nearly every operation dealing with machine->guests and threads->entries. The conversion is straightforward, however, it's worth noticing that the rb_erase_init() calls have been replaced by rb_erase_cached() which has no _init() flavor, however, the node is explicitly cleared next anyway, which was redundant until now. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-3-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25tools: Update rbtree implementationDavidlohr Bueso
There have been a number of changes in the kernel's rbrtee implementation, including loose lockless searching guarantees and rb_root_cached, which later patches will use as an optimization. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-2-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf callchain: No need to include perf.hArnaldo Carvalho de Melo
So ditch it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-bodhwdvcds9ahk26dy4w8m71@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf comm: Remove needless headers from comm.hArnaldo Carvalho de Melo
There we don't need rbtree, only in comm.c, also ditch perf.h, not needed at all. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-vr1jnwwujh99skrgldtimpmu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf namespaces: Remove namespaces.h from .h headersArnaldo Carvalho de Melo
There we need just forward declarations, so remove it and add it just on the .c files that actually touch the struct definitions. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-wsjxzt99p83jubt6hu0med0f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf symbols: Remove some unnecessary includes from symbol.hArnaldo Carvalho de Melo
And fixup the fallout in places like annotation and jitdump that were using things like dirname() but weren't including libgen.h, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-wrii9hy1a1wathc0398f9fgt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf symbols: Remove include map.h from dso.hArnaldo Carvalho de Melo
Disentangling the dependency tree, to reduce build time. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-n2gcrfmh480rm44p7fra13vv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf block-range: Add missing headersArnaldo Carvalho de Melo
Some are being obtained indirectly and as we prune unnecessary includes, this stops working, fix it by adding the headers for things used in these file. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-1p65lyeebc2ose0lbozvemda@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf tools: Move branch structs to branch.hArnaldo Carvalho de Melo
We already have it, move those there from events.h so that we untangle the header dependencies a bit more. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-pnbkqo8jxbi49d4f3yd3b5w3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf annotate: Remove lots of headers from annotate.hArnaldo Carvalho de Melo
To reduce the chances changes trigger tons of rebuilds, more to come. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ytbykaku63862guk7muflcy4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf symbols: Move symbol_conf to separate fileArnaldo Carvalho de Melo
So that we don't drag all the headers included in symbol.h when needing to access symbol_conf in another header, such as annotate.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-rvo9dzflkneqmprb0dgbfybx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf color: Add missing stdarg.g to color.hArnaldo Carvalho de Melo
It was getting the va_list definition by luck. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-4mavb7pgt2nw9lsew1xuez09@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25crypto: cavium/nitrox - Invoke callback after DMA unmapNagadheeraj Rottela
In process_response_list() invoke the callback handler after unmapping the DMA buffers. It ensures DMA data is synced form device to cpu before the client code access the data from callback handler. Fixes: c9613335bf4f ("crypto: cavium/nitrox - Added AEAD cipher support") Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-25cfg80211: extend range deviation for DMGChaitanya Tata
Recently, DMG frequency bands have been extended till 71GHz, so extend the range check till 20GHz (45-71GHZ), else some channels will be marked as disabled. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: reg: remove warn_on for a normal caseChaitanya Tata
If there are simulatenous queries of regdb, then there might be a case where multiple queries can trigger request_firmware_no_wait and can have parallel callbacks being executed asynchronously. In this scenario we might hit the WARN_ON. So remove the warn_on, as the code already handles multiple callbacks gracefully. Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25mac80211: Add attribute aligned(2) to struct 'action'Mathieu Malaterre
During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO follow-MAC mode") a new struct 'action' was declared with packed attribute as: struct { struct ieee80211_hdr_3addr hdr; u8 category; u8 action_code; } __packed action; But since struct 'ieee80211_hdr_3addr' is declared with an aligned keyword as: struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; } __packed __aligned(2); Solve the ambiguity of placing aligned structure in a packed one by adding the aligned(2) attribute to struct 'action'. This removes the following warning (W=1): net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned] Cc: Johannes Berg <johannes.berg@intel.com> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25mac80211: don't initiate TDLS connection if station is not associated to APBalaji Pothunoori
Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25nl80211: fix NLA_POLICY_NESTED() argumentsJohannes Berg
syzbot reported an out-of-bounds read when passing certain malformed messages into nl80211. The specific place where this happened isn't interesting, the problem is that nested policy parsing was referring to the wrong maximum attribute and thus the policy wasn't long enough. Fix this by referring to the correct attribute. Since this is really not necessary, I'll come up with a separate patch to just pass the policy instead of both, in the common case we can infer the maxattr from the size of the policy array. Reported-by: syzbot+4157b036c5f4713b1f2f@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25i3c: fix missing detach if failed to retrieve i3c devJisheng Zhang
If we failed to retrieve the i3c dev, we should detach the i3c dev I.E i3c_master_detach_i3c_dev(). Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-24ibmveth: Do not process frames after calling napi_rescheduleThomas Falcon
The IBM virtual ethernet driver's polling function continues to process frames after rescheduling NAPI, resulting in a warning if it exhausted its budget. Do not restart polling after calling napi_reschedule. Instead let frames be processed in the following instance. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net: dev_is_mac_header_xmit() true for ARPHRD_RAWIPMaciej Żenczykowski
__bpf_redirect() and act_mirred checks this boolean to determine whether to prefix an ethernet header. Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net: usb: asix: ax88772_bind return error when hw_reset failZhang Run
The ax88772_bind() should return error code immediately when the PHY was not reset properly through ax88772a_hw_reset(). Otherwise, The asix_get_phyid() will block when get the PHY Identifier from the PHYSID1 MII registers through asix_mdio_read() due to the PHY isn't ready. Furthermore, it will produce a lot of error message cause system crash.As follows: asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 ... Signed-off-by: Zhang Run <zhang.run@zte.com.cn> Reviewed-by: Yang Wei <yang.wei9@zte.com.cn> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24MAINTAINERS: Update cavium networking driversSudarsana Reddy Kalluru
Following Marvell's acquisition of Cavium, we need to update all the Cavium drivers maintainer's entries to point to our new e-mail addresses. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ameen Rahman <Ameen.Rahman@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24Merge tag 'hyperv-fixes-signed' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Sasha Levin says: ==================== Hyper-V hv_netvsc commits for 5.0 Three patches from Haiyang Zhang to fix settings hash key using ethtool, and Adrian Vladu's first patch fixing a few spelling mistakes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24Merge tag 'linux-can-fixes-for-5.0-20190122' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-01-22 this is a pull request of 4 patches for net/master. The first patch by is by Manfred Schlaegl and reverts a patch that caused wrong warning messages in certain use cases. The next patch is by Oliver Hartkopp for the bcm that adds sanity checks for the timer value before using it to detect potential interger overflows. The last two patches are for the flexcan driver, YueHaibing's patch fixes the the return value in the error path of the flexcan_setup_stop_mode() function. The second patch is by Uwe Kleine-König and fixes a NULL pointer deref on older flexcan cores in flexcan_chip_start(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24Merge branch 'mlx4_core-fixes'David S. Miller
Tariq Toukan says: ==================== mlx4_core fixes for 5.0-rc This patchset includes two fixes for the mlx4_core driver. First patch by Aya fixes inaccurate parsing of some FW fields, mistakenly including additional (mostly reserved) bits. Second patch by Jack fixes a wrong (yet harmless) error handling of calls to copy_to_user() during the CQs init stage. Series generated against net commit: 49a57857aeea Linux 5.0-rc3 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net/mlx4_core: Fix error handling when initializing CQ bufs in the driverJack Morgenstein
Procedure mlx4_init_user_cqes() handles returns by copy_to_user incorrectly. copy_to_user() returns the number of bytes not copied. Thus, a non-zero return should be treated as a -EFAULT error (as is done elsewhere in the kernel). However, mlx4_init_user_cqes() error handling simply returns the number of bytes not copied (instead of -EFAULT). Note, though, that this is a harmless bug: procedure mlx4_alloc_cq() (which is the only caller of mlx4_init_user_cqes()) treats any non-zero return as an error, but that returned error value is processed internally, and not passed further up the call stack. In addition, fixes the following sparse warning: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:1>*to got void *buf Fixes: e45678973dcb ("{net, IB}/mlx4: Initialize CQ buffers in the driver when possible") Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net/mlx4_core: Add masking for a few queries on HCA capsAya Levin
Driver reads the query HCA capabilities without the corresponding masks. Without the correct masks, the base addresses of the queues are unaligned. In addition some reserved bits were wrongly read. Using the correct masks, ensures alignment of the base addresses and allows future firmware versions safe use of the reserved bits. Fixes: ab9c17a009ee ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet") Fixes: 0ff1fb654bec ("{NET, IB}/mlx4: Add device managed flow steering firmware API") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24sctp: set flow sport from saddr only when it's 0Xin Long
Now sctp_transport_pmtu() passes transport->saddr into .get_dst() to set flow sport from 'saddr'. However, transport->saddr is set only when transport->dst exists in sctp_transport_route(). If sctp_transport_pmtu() is called without transport->saddr set, like when transport->dst doesn't exists, the flow sport will be set to 0 from transport->saddr, which will cause a wrong route to be got. Commit 6e91b578bf3f ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") made the issue be triggered more easily since sctp_transport_pmtu() would be called in sctp_transport_route() after that. In gerneral, fl4->fl4_sport should always be set to htons(asoc->base.bind_addr.port), unless transport->asoc doesn't exist in sctp_v4/6_get_dst(), which is the case: sctp_ootb_pkt_new() -> sctp_transport_route() For that, we can simply handle it by setting flow sport from saddr only when it's 0 in sctp_v4/6_get_dst(). Fixes: 6e91b578bf3f ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24sctp: set chunk transport correctly when it's a new asocXin Long
In the paths: sctp_sf_do_unexpected_init() -> sctp_make_init_ack() sctp_sf_do_dupcook_a/b()() -> sctp_sf_do_5_1D_ce() The new chunk 'retval' transport is set from the incoming chunk 'chunk' transport. However, 'retval' transport belong to the new asoc, which is a different one from 'chunk' transport's asoc. It will cause that the 'retval' chunk gets set with a wrong transport. Later when sending it and because of Commit b9fd683982c9 ("sctp: add sctp_packet_singleton"), sctp_packet_singleton() will set some fields, like vtag to 'retval' chunk from that wrong transport's asoc. This patch is to fix it by setting 'retval' transport correctly which belongs to the right asoc in sctp_make_init_ack() and sctp_sf_do_5_1D_ce(). Fixes: b9fd683982c9 ("sctp: add sctp_packet_singleton") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24sctp: improve the events for sctp stream addingXin Long
This patch is to improve sctp stream adding events in 2 places: 1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM and in stream allocation failure checks, as the adding has to succeed after reconf_timer stops for the in stream adding request retransmission. 3. In sctp_process_strreset_addstrm_in(), no event should be sent, as no in or out stream is added here. Fixes: 50a41591f110 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter") Fixes: c5c4ebb3ab87 ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24sctp: improve the events for sctp stream resetXin Long
This patch is to improve sctp stream reset events in 4 places: 1. In sctp_process_strreset_outreq(), the flag should always be set with SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in stream is reset here. 2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN check, as the reset has to succeed after reconf_timer stops for the in stream reset request retransmission. 3. In sctp_process_strreset_inreq(), no event should be sent, as no in or out stream is reset here. 4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or OUTGOING event should always be sent for stream reset requests, no matter it fails or succeeds to process the request. Fixes: 810544764536 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter") Fixes: 16e1a91965b0 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter") Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnelwenxu
ip l add dev tun type gretap key 1000 ip a a dev tun 10.0.0.1/24 Packets with tun-id 1000 can be recived by tun dev. But packet can't be sent through dev tun for non-tunnel-dst With this patch: tunnel-dst can be get through lwtunnel like beflow: ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24xtensa: SMP: fix ccount_timer_shutdownMax Filippov
ccount_timer_shutdown is called from the atomic context in the secondary_start_kernel, resulting in the following BUG: BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1 Preemption disabled at: secondary_start_kernel+0xa1/0x130 Call Trace: ___might_sleep+0xe7/0xfc __might_sleep+0x41/0x44 synchronize_irq+0x24/0x64 disable_irq+0x11/0x14 ccount_timer_shutdown+0x12/0x20 clockevents_switch_state+0x82/0xb4 clockevents_exchange_device+0x54/0x60 tick_check_new_device+0x46/0x70 clockevents_register_device+0x8c/0xc8 clockevents_config_and_register+0x1d/0x2c local_timer_setup+0x75/0x7c secondary_start_kernel+0xb4/0x130 should_never_return+0x32/0x35 Use disable_irq_nosync instead of disable_irq to avoid it. This is safe because the ccount timer IRQ is per-CPU, and once IRQ is masked the ISR will not be called. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-25Merge tag 'drm-fixes-2019-01-25-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Live from LCA pull, some fixes all over the place, i915: - GVT workload destruction fix msm: - A6XX opp-level fix - build fixes - hard-coded irq removal amdgpu: - overclocking fix - hybrid gfx fix sun4i: - fix TMDS clock usage" * tag 'drm-fixes-2019-01-25-1' of git://anongit.freedesktop.org/drm/drm: drm/msm: avoid unused function warning drm/msm: Add __printf verification drm/msm: Fix A6XX support for opp-level drm/msm: honor GPU_READONLY flag drm/msm: drop interrupt-names drm/msm/gpu: Remove hardcoded interrupt name drm/msm/gpu: fix building without debugfs drm/i915/execlists: Mark up priority boost on preemption drm/i915/gvt: release shadow batch buffer and wa_ctx before destroy one workload drm/sun4i: hdmi: Fix usage of TMDS clock drm/amd/powerplay: OD setting fix on Vega10 drm/amdgpu: Add APTX quirk for Lenovo laptop drm/msm: Unblock writer if reader closes file
2019-01-25Merge tag 'drm-msm-fixes-2019-01-24' of ↵Dave Airlie
git://people.freedesktop.org/~robclark/linux into drm-fixes A few fixes for v5.0.. the opp-level fix and removal of hard-coded irq name is partially to make things smoother in v5.1 merge window to avoid dependency on drm vs dt trees, but are otherwise sane changes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsAEHd2tGRQxRTs+A-8y_tthPs2iUgCCCEwR5vDMXab4A@mail.gmail.com
2019-01-25Merge tag 'drm-intel-fixes-2019-01-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.0-rc4: - fix priority boost - gvt: fix destroy of shadow batch and indirect ctx Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87k1iu1a2e.fsf@intel.com
generated by cgit (git 2.34.1) at 2025-09-13 09:31:50 +0000