| Age | Commit message (Collapse) | Author |
|---|
|
[ a.k.a. Revert "Revert "ARM64: Dynamically allocate cpumasks and
increase supported CPUs to 512""; originally reverted because of a
bug in the cpufreq-dt code not using zalloc_cpumask_var() ]
Currently defconfig selects NR_CPUS=256, but some vendors (e.g. Ampere
Computing) are planning to ship systems with 512 CPUs. So that all CPUs on
these systems can be used with defconfig, we'd like to bump NR_CPUS to 512.
Therefore this patch increases the default NR_CPUS from 256 to 512.
As increasing NR_CPUS will increase the size of cpumasks, there's a fear that
this might have a significant impact on stack usage due to code which places
cpumasks on the stack. To mitigate that concern, we can select
CPUMASK_OFFSTACK. As that doesn't seem to be a problem today with
NR_CPUS=256, we only select this when NR_CPUS > 256.
CPUMASK_OFFSTACK configures the cpumasks in the kernel to be
dynamically allocated. This was used in the X86 architecture in the
past to enable support for larger CPU configurations up to 8k cpus.
With that is becomes possible to dynamically size the allocation of
the cpu bitmaps depending on the quantity of processors detected on
bootup. Memory used for cpumasks will increase if the kernel is
run on a machine with more cores.
Further increases may be needed if ARM processor vendors start
supporting more processors. Given the current inflationary trends
in core counts from multiple processor manufacturers this may occur.
There are minor regressions for hackbench. The kernel data size
for 512 cpus is smaller with offstack than with onstack.
Benchmark results using hackbench average over 10 runs of
hackbench -s 512 -l 2000 -g 15 -f 25 -P
on Altra 80 Core
Support for 256 CPUs on stack. Baseline
7.8564 sec
Support for 512 CUs on stack.
7.8713 sec + 0.18%
512 CPUS offstack
7.8916 sec + 0.44%
Kernel size comparison:
text data filename Difference to onstack256 baseline
25755648 9589248 vmlinuz-6.8.0-rc4-onstack256
25755648 9607680 vmlinuz-6.8.0-rc4-onstack512 +0.19%
25755648 9603584 vmlinuz-6.8.0-rc4-offstack512 +0.14%
Tested-by: Eric Mackay <eric.mackay@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoph Lameter (Ampere) <cl@linux.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/37099a57-b655-3b3a-56d0-5f7fbd49d7db@gentwo.org
Link: https://lore.kernel.org/r/20240314125457.186678-1-m.szyprowski@samsung.com
[catalin.marinas@arm.com: use 'select' instead of duplicating 'config CPUMASK_OFFSTACK']
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This reverts commit cb1a393c40eee2f1692c995ea0cc6e45bfccde4d.
Since the arm64 WXN patch has been reverted, remove this hook as it
would not have any users.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/ZfGESD3a91lxH367@arm.com
|
|
This reverts commit 50e3ed0f93f4f62ed2aa83de5db6cb84ecdd5707.
The SCTLR_EL1.WXN control forces execute-never when a page has write
permissions. While the idea of hardening such write/exec combinations is
good, with permissions indirection enabled (FEAT_PIE) this control
becomes RES0. FEAT_PIE introduces a slightly different form of WXN which
only has an effect when the base permission is RWX and the write is
toggled by the permission overlay (FEAT_POE, not yet supported by the
arm64 kernel). Revert the patch for now.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/ZfGESD3a91lxH367@arm.com
|
|
This reverts commit 0499a78369adacec1af29340b71ff8dd375b4697.
Enabling CPUMASK_OFFSTACK on arm64 triggers a warning in the
dev_pm_opp_set_config() function followed by a failure to set the
regulators and cpufreq-dt probing error. There is no apparent reason why
this happens, so revert this commit until further investigation.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/c1f2902d-cefc-4122-9b86-d1d32911f590@samsung.com
|
|
* for-next/stage1-lpa2: (48 commits)
: Add support for LPA2 and WXN and stage 1
arm64/mm: Avoid ID mapping of kpti flag if it is no longer needed
arm64/mm: Use generic __pud_free() helper in pud_free() implementation
arm64: gitignore: ignore relacheck
arm64: Use Signed/Unsigned enums for TGRAN{4,16,64} and VARange
arm64: mm: Make PUD folding check in set_pud() a runtime check
arm64: mm: add support for WXN memory translation attribute
mm: add arch hook to validate mmap() prot flags
arm64: defconfig: Enable LPA2 support
arm64: Enable 52-bit virtual addressing for 4k and 16k granule configs
arm64: kvm: avoid CONFIG_PGTABLE_LEVELS for runtime levels
arm64: ptdump: Deal with translation levels folded at runtime
arm64: ptdump: Disregard unaddressable VA space
arm64: mm: Add support for folding PUDs at runtime
arm64: kasan: Reduce minimum shadow alignment and enable 5 level paging
arm64: mm: Add 5 level paging support to fixmap and swapper handling
arm64: Enable LPA2 at boot if supported by the system
arm64: mm: add LPA2 and 5 level paging support to G-to-nG conversion
arm64: mm: Add definitions to support 5 levels of paging
arm64: mm: Add LPA2 support to phys<->pte conversion routines
arm64: mm: Wire up TCR.DS bit to PTE shareability fields
...
|
|
'for-next/misc', 'for-next/daif-cleanup', 'for-next/kselftest', 'for-next/documentation', 'for-next/sysreg' and 'for-next/dpisa', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (39 commits)
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
drivers/perf: hisi_pcie: Merge find_related_event() and get_event_idx()
drivers/perf: hisi_pcie: Relax the check on related events
drivers/perf: hisi_pcie: Check the target filter properly
drivers/perf: hisi_pcie: Add more events for counting TLP bandwidth
drivers/perf: hisi_pcie: Fix incorrect counting under metric mode
drivers/perf: hisi_pcie: Introduce hisi_pcie_pmu_get_event_ctrl_val()
drivers/perf: hisi_pcie: Rename hisi_pcie_pmu_{config,clear}_filter()
drivers/perf: hisi: Enable HiSilicon Erratum 162700402 quirk for HIP09
perf/arm_cspmu: Add devicetree support
dt-bindings/perf: Add Arm CoreSight PMU
perf/arm_cspmu: Simplify counter reset
perf/arm_cspmu: Simplify attribute groups
perf/arm_cspmu: Simplify initialisation
...
* for-next/reorg-va-space:
: Reorganise the arm64 kernel VA space in preparation for LPA2 support
: (52-bit VA/PA).
arm64: kaslr: Adjust randomization range dynamically
arm64: mm: Reclaim unused vmemmap region for vmalloc use
arm64: vmemmap: Avoid base2 order of struct page size to dimension region
arm64: ptdump: Discover start of vmemmap region at runtime
arm64: ptdump: Allow all region boundaries to be defined at boot time
arm64: mm: Move fixmap region above vmemmap region
arm64: mm: Move PCI I/O emulation region above the vmemmap region
* for-next/rust-for-arm64:
: Enable Rust support for arm64
arm64: rust: Enable Rust support for AArch64
rust: Refactor the build target to allow the use of builtin targets
* for-next/misc:
: Miscellaneous arm64 patches
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
arm64: Remove enable_daif macro
arm64/hw_breakpoint: Directly use ESR_ELx_WNR for an watchpoint exception
arm64: cpufeatures: Clean up temporary variable to simplify code
arm64: Update setup_arch() comment on interrupt masking
arm64: remove unnecessary ifdefs around is_compat_task()
arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang
arm64/sme: Ensure that all fields in SMCR_EL1 are set to known values
arm64/sve: Ensure that all fields in ZCR_EL1 are set to known values
arm64/sve: Document that __SVE_VQ_MAX is much larger than needed
arm64: make member of struct pt_regs and it's offset macro in the same order
arm64: remove unneeded BUILD_BUG_ON assertion
arm64: kretprobes: acquire the regs via a BRK exception
arm64: io: permit offset addressing
arm64: errata: Don't enable workarounds for "rare" errata by default
* for-next/daif-cleanup:
: Clean up DAIF handling for EL0 returns
arm64: Unmask Debug + SError in do_notify_resume()
arm64: Move do_notify_resume() to entry-common.c
arm64: Simplify do_notify_resume() DAIF masking
* for-next/kselftest:
: Miscellaneous arm64 kselftest patches
kselftest/arm64: Test that ptrace takes effect in the target process
* for-next/documentation:
: arm64 documentation patches
arm64/sme: Remove spurious 'is' in SME documentation
arm64/fp: Clarify effect of setting an unsupported system VL
arm64/sme: Fix cut'n'paste in ABI document
arm64/sve: Remove bitrotted comment about syscall behaviour
* for-next/sysreg:
: sysreg updates
arm64/sysreg: Update ID_AA64DFR0_EL1 register
arm64/sysreg: Update ID_DFR0_EL1 register fields
arm64/sysreg: Add register fields for ID_AA64DFR1_EL1
* for-next/dpisa:
: Support for 2023 dpISA extensions
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
|
|
Currently defconfig selects NR_CPUS=256, but some vendors (e.g. Ampere
Computing) are planning to ship systems with 512 CPUs. So that all CPUs on
these systems can be used with defconfig, we'd like to bump NR_CPUS to 512.
Therefore this patch increases the default NR_CPUS from 256 to 512.
As increasing NR_CPUS will increase the size of cpumasks, there's a fear that
this might have a significant impact on stack usage due to code which places
cpumasks on the stack. To mitigate that concern, we can select
CPUMASK_OFFSTACK. As that doesn't seem to be a problem today with
NR_CPUS=256, we only select this when NR_CPUS > 256.
CPUMASK_OFFSTACK configures the cpumasks in the kernel to be
dynamically allocated. This was used in the X86 architecture in the
past to enable support for larger CPU configurations up to 8k cpus.
With that is becomes possible to dynamically size the allocation of
the cpu bitmaps depending on the quantity of processors detected on
bootup. Memory used for cpumasks will increase if the kernel is
run on a machine with more cores.
Further increases may be needed if ARM processor vendors start
supporting more processors. Given the current inflationary trends
in core counts from multiple processor manufacturers this may occur.
There are minor regressions for hackbench. The kernel data size
for 512 cpus is smaller with offstack than with onstack.
Benchmark results using hackbench average over 10 runs of
hackbench -s 512 -l 2000 -g 15 -f 25 -P
on Altra 80 Core
Support for 256 CPUs on stack. Baseline
7.8564 sec
Support for 512 CUs on stack.
7.8713 sec + 0.18%
512 CPUS offstack
7.8916 sec + 0.44%
Kernel size comparison:
text data filename Difference to onstack256 baseline
25755648 9589248 vmlinuz-6.8.0-rc4-onstack256
25755648 9607680 vmlinuz-6.8.0-rc4-onstack512 +0.19%
25755648 9603584 vmlinuz-6.8.0-rc4-offstack512 +0.14%
Tested-by: Eric Mackay <eric.mackay@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoph Lameter (Ampere) <cl@linux.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/37099a57-b655-3b3a-56d0-5f7fbd49d7db@gentwo.org
[catalin.marinas@arm.com: use 'select' instead of duplicating 'config CPUMASK_OFFSTACK']
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add the hwcaps added for the 2023 DPISA extensions to the hwcaps test
program.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-9-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Verify that a FPMR frame is generated on systems that support FPMR and not
generated otherwise.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-8-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Teach the generic signal frame parsing code about the newly added FPMR
frame, avoiding warnings every time one is generated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-7-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The 2023 architecture extensions include a large number of floating point
features, most of which simply add new instructions. Add hwcaps so that
userspace can enumerate these features.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-6-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add a new regset to expose FPMR via ptrace. It is not added to the FPSIMD
registers since that structure is exposed elsewhere without any allowance
for extension we don't add there.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-5-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Expose FPMR in the signal context on systems where it is supported. The
kernel validates the exact size of the FPSIMD registers so we can't readily
add it to fpsimd_context without disruption.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-4-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
FEAT_FPMR defines a new EL0 accessible register FPMR use to configure the
FP8 related features added to the architecture at the same time. Detect
support for this register and context switch it for EL0 when present.
Due to the sharing of responsibility for saving floating point state
between the host kernel and KVM FP8 support is not yet implemented in KVM
and a stub similar to that used for SVCR is provided for FPMR in order to
avoid bisection issues. To make it easier to share host state with the
hypervisor we store FPMR as a hardened usercopy field in uw (along with
some padding).
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-3-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
FEAT_FPMR provides a new generally accessible architectural register FPMR.
This is only accessible to EL0 and EL1 when HCRX_EL2.EnFPM is set to 1,
do this when the host is running. The guest part will be done along with
context switching the new register and exposing it via guest management.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-2-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The 2023 architecture extensions have defined several new ID registers,
hook them up to the cpufeature code so we can add feature checks and hwcaps
based on their contents.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-1-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
`make htmldocs SPHINXDIRS="admin-guide"` shows below warnings:
Documentation/admin-guide/perf/hisi-pcie-pmu.rst:48: ERROR: Unexpected indentation.
Documentation/admin-guide/perf/hisi-pcie-pmu.rst:49: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix this.
Closes: https://lore.kernel.org/lkml/20231011172250.5a6498e5@canb.auug.org.au/
Fixes: 89a032923d4b ("docs: perf: Update usage for target filter of hisi-pcie-pmu")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240305122517.12179-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The kbuild robot exploded while wasting its time building the Starfive
PMU driver for the 32-bit PA-RISC and Hexagon architectures.
Adjust the Kconfig dependencies so that COMPILE_TEST is only applicable
for 64-bit architectures (which implement writeq()).
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add maintainer entry for StarFive StarLink PMU driver, and mark it as
"Maintained"
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Link: https://lore.kernel.org/r/20240229072720.3987876-5-jisheng.teoh@starfivetech.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
StarFive StarLink PMU support monitoring L3 memory system PMU events.
Add documentation to describe StarFive StarLink PMU support and it's
usage.
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Link: https://lore.kernel.org/r/20240229072720.3987876-4-jisheng.teoh@starfivetech.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add device tree binding for StarFive's JH8100 StarLink PMU (Performance
Monitor Unit).
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240229072720.3987876-3-jisheng.teoh@starfivetech.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch adds support for StarFive's StarLink PMU (Performance
Monitor Unit). StarLink PMU integrates one or more CPU cores with
a shared L3 memory system. The PMU supports overflow interrupt,
up to 16 programmable 64bit event counters, and an independent
64bit cycle counter. StarLink PMU is accessed via MMIO.
Example Perf stat output:
[root@user]# perf stat -a -e /starfive_starlink_pmu/cycles/ \
-e /starfive_starlink_pmu/read_miss/ \
-e /starfive_starlink_pmu/read_hit/ \
-e /starfive_starlink_pmu/release_request/ \
-e /starfive_starlink_pmu/write_hit/ \
-e /starfive_starlink_pmu/write_miss/ \
-e /starfive_starlink_pmu/write_request/ \
-e /starfive_starlink_pmu/writeback/ \
-e /starfive_starlink_pmu/read_request/ \
-- openssl speed rsa2048
Doing 2048 bits private rsa's for 10s: 5 2048 bits private RSA's in
2.84s
Doing 2048 bits public rsa's for 10s: 169 2048 bits public RSA's in
2.42s
version: 3.0.11
built on: Tue Sep 19 13:02:31 2023 UTC
options: bn(64,64)
CPUINFO: N/A
sign verify sign/s verify/s
rsa 2048 bits 0.568000s 0.014320s 1.8 69.8
/////////
Performance counter stats for 'system wide':
649991998 starfive_starlink_pmu/cycles/
1009690 starfive_starlink_pmu/read_miss/
1079750 starfive_starlink_pmu/read_hit/
2089405 starfive_starlink_pmu/release_request/
129 starfive_starlink_pmu/write_hit/
70 starfive_starlink_pmu/write_miss/
194 starfive_starlink_pmu/write_request/
150080 starfive_starlink_pmu/writeback/
2089423 starfive_starlink_pmu/read_request/
27.062755678 seconds time elapsed
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Link: https://lore.kernel.org/r/20240229072720.3987876-2-jisheng.teoh@starfivetech.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
One of the "port" and "bdf" target filter interface must be set, and
the related events should preferably used in the same group.
Update the usage in the documentation.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-9-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The function xxx_find_related_event() scan all working events to find
related events. During this process, we also can find the idle counters.
If not found related events, return the first idle counter to simplify
the code.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-8-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If we use two events with the same filter and related event type
(see the following example), the driver check whether they are related
events and are in the same group, otherwise the function
hisi_pcie_pmu_find_related_event() return -EINVAL, then the 2nd event
cannot count but the 1st event is running, although the PCIe PMU has
other idle counters.
In this case, The perf event scheduler will make the two events to
multiplex a counter, if the user use the formula
(1st event_value / 2nd event_value) to calculate the bandwidth, he/she
won't get the correct value, because they are not counting at the
same period.
This patch tries to fix this by making the related events to use
different idle counters if they are not in the same event group.
And finally, I'm going to say. The related events are best used in the
same group [1]. There are two ways to know if they are related events.
a) By event name, such as the latency events "xxx_latency, xxx_cnt" or
bandwidth events "xxx_flux, xxx_time".
b) By event type, such as "event=0xXXXX, event=0x1XXXX".
Use group to count the related events:
[1] -e "{pmu_name/xxx_latency,port=1/,pmu_name/xxx_cnt,port=1/}"
example:
1st event: hisi_pcie0_core1/event=0x804,port=1
2nd event: hisi_pcie0_core1/event=0x10804,port=1
test cmd:
perf stat -e hisi_pcie0_core1/event=0x804,port=1/ \
-e hisi_pcie0_core1/event=0x10804,port=1/
before patch:
25,281 hisi_pcie0_core1/event=0x804,port=1/ (49.91%)
470,598 hisi_pcie0_core1/event=0x10804,port=1/ (50.09%)
after patch:
24,147 hisi_pcie0_core1/event=0x804,port=1/
474,558 hisi_pcie0_core1/event=0x10804,port=1/
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-7-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The PMU can monitor traffic of certain target Root Port or downstream
target Endpoint. User can specify the target filter by the "port" or
"bdf" option respectively. The PMU can only monitor the Root Port or
Endpoint on the same PCIe core so the value of "port" or "bdf" should
be valid and will be checked by the driver.
Currently at least and only one of "port" and "bdf" option must be set.
If "port" filter is not set or is set explicitly to zero (default),
driver will regard the user specifies a "bdf" option since "port" option
is a bitmask of the target Root Ports and zero is not a valid
value.
If user not explicitly set "port" or "bdf" filter, the driver uses "bdf"
default value (zero) to set target filter, but driver will skip the
check of bdf=0, although it's a valid value (meaning 0000:000:00.0).
Then the user just gets zero.
Therefore, we need to check if both "port" and "bdf" are invalid, then
return failure and report warning.
Testing:
before the patch:
0 hisi_pcie0_core1/rx_mrd_flux/
0 hisi_pcie0_core1/rx_mrd_flux,port=0/
24,124 hisi_pcie0_core1/rx_mrd_flux,port=1/
0 hisi_pcie0_core1/rx_mrd_flux,bdf=0/
0 hisi_pcie0_core1/rx_mrd_flux,port=0x800/
<not supported> hisi_pcie0_core1/rx_mrd_flux,bdf=1/
24,132 hisi_pcie0_core1/rx_mrd_flux,bdf=0x1700/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x0/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x1/
24,138 hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x1700/
24,126 hisi_pcie0_core1/rx_mrd_flux,port=0x1,bdf=0x0/
after the patch:
<not supported> hisi_pcie0_core1/rx_mrd_flux/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0/
24,153 hisi_pcie0_core1/rx_mrd_flux,port=1/
0 hisi_pcie0_core1/rx_mrd_flux,port=0x800/
<not supported> hisi_pcie0_core1/rx_mrd_flux,bdf=0/
<not supported> hisi_pcie0_core1/rx_mrd_flux,bdf=1/
24,117 hisi_pcie0_core1/rx_mrd_flux,bdf=0x1700/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x0/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x1/
24,120 hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x1700/
24,123 hisi_pcie0_core1/rx_mrd_flux,port=0x1,bdf=0x0/
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-6-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A typical PCIe transaction is consisted of various TLP packets in both
direction. For counting bandwidth only memory read events are exported
currently. Add memory write and completion counting events of both
direction to complete the bandwidth counting.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-5-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The metric counting shows incorrect results if the events in the
metric group using the same event but different filter options.
This is because we only judge the event code to decide whether
the event in the metric group should share the same hardware
counter, but ignore the settings of the filter.
For example, on a platform of 2 ports 0x1 and 0x2 but only port
0x1 has a downstream PCIe NVME device. The metric counting
shows both ports have the same counts because we misassign these
two events to one same hardware counter:
[root@localhost perf-iostat]# ./perf stat -e '{hisi_pcie0_core1/event=0x0104,port=0x2/,hisi_pcie0_core1/event=0x0104,port=0x1/}'
Performance counter stats for 'system wide':
7907484924 hisi_pcie0_core1/event=0x0104,port=0x2/
7907484924 hisi_pcie0_core1/event=0x0104,port=0x1/
10.153863691 seconds time elapsed
Fix this by using the whole config rather than the event only
to judge whether two events are the same and should share the
same hardware counter. With this patch, the metric counting in
the above case tends to be corrected:
[root@localhost perf-iostat]# ./perf stat -e '{hisi_pcie0_core1/event=0x0104,port=0x2/,hisi_pcie0_core1/event=0x0104,port=0x1/}'
Performance counter stats for 'system wide':
0 hisi_pcie0_core1/event=0x0104,port=0x2/
8123122077 hisi_pcie0_core1/event=0x0104,port=0x1/
10.152875631 seconds time elapsed
Fixes: 8404b0fbc7fb ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-4-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Factor out retrieving of the register value for the
corresponding event from hisi_pcie_config_event_ctrl() into a
new function hisi_pcie_pmu_get_event_ctrl_val() allowing future
reuse.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
hisi_pcie_pmu_{config,clear}_filter() are config/clear HISI_PCIE_EVENT_CTRL
register which contains not only the filter but also the event code. The
function names are bit misleading. Rename it to
hisi_pcie_pmu_{config,clear}_event_ctrl() to reflects their functions
more accurately.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
HiSilicon UC PMU v2 suffers the erratum 162700402 that the PMU counter
cannot be set due to the lack of clock under power saving mode. This will
lead to error or inaccurate counts. The clock can be enabled by the PMU
global enabling control.
This patch tries to fix this by set the UC PMU enable before set event
period to turn on the clock, and then restore the UC PMU configuration.
The counter register can hold its value without a clock.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240227125231.53127-1-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since commit bb8e93a287a5 ("arm64: entry: convert SError handlers to C"),
the enable_daif assembler macro is no longer used anywhere, so remove it.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240229132802.1682026-2-ruanjinjie@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Let's use existing ISS encoding for an watchpoint exception i.e ESR_ELx_WNR
This represents an instruction's either writing to or reading from a memory
location during an watchpoint exception. While here this drops non-standard
macro AARCH64_ESR_ACCESS_MASK.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240229083431.356578-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Clean up one temporary variable to simplifiy code in capability
detection.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240229105208.456704-1-liaochang1@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
arm64_use_ng_mappings will be set to 'true' by the early boot code if it
decides to use non-global (nG) attributes for all kernel mappings,
typically when enabling KASLR on a system that does not implement E0PD.
In this case, the G-to-nG update routines are never called, and so there
is no reason to create the writable mapping of the associated status
flag in the ID map.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240301104046.1234309-6-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit 0dd4f60a2c76 ("arm64: mm: Add support for folding PUDs at
runtime") implements specialized PUD alloc/free helpers to allow the
decision whether or not to fold PUDs to be made at runtime when the
number of paging levels is 4 or higher.
Its implementation of pud_free() is based on the generic version that
existed when the patch was first written, but in the meantime, the
freeing of a PUD has become a bit more involved, and so instead of
simply freeing the page, we should invoke the generic __pud_free() that
encapsulates whatever needs doing at this point.
This fixes a reported warning emitted by the page flags
self-diagnostics.
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20240301104046.1234309-5-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
DAIF_PROCCTX_NOIRQ contains the FIQ bit. Update the comment as only
asynchronous aborts are unmasked and FIQ is still masked.
Signed-off-by: Ryo Takakura <takakura@valinux.co.jp>
Link: https://lore.kernel.org/r/20240228022836.1756-1-takakura@valinux.co.jp
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently some parts of the codebase will test for CONFIG_COMPAT before
testing is_compat_task().
is_compat_task() is a inlined function only present on CONFIG_COMPAT.
On the other hand, for !CONFIG_COMPAT, we have in linux/compat.h:
#define is_compat_task() (0)
Since we have this define available in every usage of is_compat_task() for
!CONFIG_COMPAT, it's unnecessary to keep the ifdefs, since the compiler is
smart enough to optimize-out those snippets on CONFIG_COMPAT=n
This requires some regset code as well as a few other defines to be made
available on !CONFIG_COMPAT, so some symbols can get resolved before
getting optimized-out.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240109034651.478462-2-leobras@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Per commit b3f11af9b2ce ("arm64: ftrace: forbid CALL_OPS with
CC_OPTIMIZE_FOR_SIZE"), GCC is silently ignoring `-falign-functions=N`
when passed `-Os`, causing functions to be improperly aligned. This
doesn't seem to be a problem with Clang though, where enabling CALL_OPS
with CC_OPTIMIZE_FOR_SIZE doesn't spit out any warnings at boot about
misaligned patch-sites. Only forbid CALL_OPS if GCC is used and we're
optimizing for size so that CALL_OPS can be used with clang optimizing
for size.
Cc: Jason Ling <jasonling@chromium.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: llvm@lists.linux.dev
Fixes: b3f11af9b2ce ("arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240223064032.3463229-1-swboyd@chromium.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add the generated executable for relacheck to the list of ignored files.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240222210441.33142-1-brgl@bgdev.pl
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
At present nothing in our CPU initialisation code ever sets unknown fields
in SMCR_EL1 to known values, all updates to SMCR_EL1 are read/modify/write
sequences. All the unknown fields are RES0, explicitly initialise them as
such to avoid future surprises.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm64-fp-init-vec-cr-v1-2-7e7c2d584f26@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
At present nothing in our CPU initialisation code ever sets unknown fields
in ZCR_EL1 to known values, all updates to ZCR_EL1 are read/modify/write
sequences for LEN. All the unknown fields are RES0, explicitly initialise
them as such to avoid future surprises.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm64-fp-init-vec-cr-v1-1-7e7c2d584f26@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
__SVE_VQ_MAX is defined without comment as 512 but the actual
architectural maximum is 16, a substantial difference which might not
be obvious to readers especially given the several different units used
for specifying vector sizes in various contexts and the fact that it's
often used via macros. In an effort to minimise surprises for users who
might assume the value is the architectural maximum and use it to do
things like size allocations add a comment noting the difference, and
add a note for SVE_VQ_MAX to aid discoverability.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20240209-arm64-sve-vl-max-comment-v2-1-111b283469ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In struct pt_regs, member pstate is after member pc. Move offset macro
of pstate after offset macro of pc to improve readability a little.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240130175504.106364-1-shikemeng@huaweicloud.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since commit c02433dd6de3 ("arm64: split thread_info from task stack"),
CONFIG_THREAD_INFO_IN_TASK is enabled unconditionally for arm64. So
remove this always-true assertion from arch_dup_task_struct.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240202040211.3118918-1-dawei.li@shingroup.cn
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This updates ID_AA64DFR0_EL1.PMSVer and ID_AA64DFR0_EL1.DebugVer register
fields as per the definitions based on DDI0601 2023-12.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240220034829.3098373-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This updates ID_DFR0_EL1.PerfMon and ID_DFR0_EL1.CopDbg register fields as
per the definitions based on DDI0601 2023-12.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240220025343.3093955-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This adds register fields for ID_AA64DFR1_EL1 as per the definitions based
on DDI0601 2023-12.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240220023203.3091229-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Just a typographical error.
Reported-by: Edmund Grimley-Evans <edmund.grimley-evans@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240124-arm64-sve-sme-doc-v2-4-fe3964fb3c19@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The documentation for system vector length configuration does not cover all
cases where unsupported values are written, tighten it up.
Reported-by: Edmund Grimley-Evans <edmund.grimley-evans@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20240124-arm64-sve-sme-doc-v2-3-fe3964fb3c19@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
