summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-31mlxsw: spectrum_buffers: Further reduce pool size on Spectrum-2Petr Machata
In commit e891ce1dd2a5 ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2"), pool size was reduced to mitigate a problem in port buffer usage of ports split four ways. It turns out that this work around does not solve the issue, and a further reduction is required. Thus reduce the size of pool 0 by another 2.7 MiB, and round down to the whole number of cells. Fixes: e891ce1dd2a5 ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31mlxsw: spectrum: Fix error path in mlxsw_sp_module_init()Jiri Pirko
In case of sp2 pci driver registration fail, fix the error path to start with sp1 pci driver unregister. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01kbuild: Check for unknown options with cc-option usage in Kconfig and clangStephen Boyd
If the particular version of clang a user has doesn't enable -Werror=unknown-warning-option by default, even though it is the default[1], then make sure to pass the option to the Kconfig cc-option command so that testing options from Kconfig files works properly. Otherwise, depending on the default values setup in the clang toolchain we will silently assume options such as -Wmaybe-uninitialized are supported by clang, when they really aren't. A compilation issue only started happening for me once commit 589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS") was applied on top of commit b303c6df80c9 ("kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig"). This leads kbuild to try and test for the existence of the -Wmaybe-uninitialized flag with the cc-option command in scripts/Kconfig.include, and it doesn't see an error returned from the option test so it sets the config value to Y. Then the Makefile tries to pass the unknown option on the command line and -Werror=unknown-warning-option catches the invalid option and breaks the build. Before commit 589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS") the build works fine, but any cc-option test of a warning option in Kconfig files silently evaluates to true, even if the warning option flag isn't supported on clang. Note: This doesn't change cc-option usages in Makefiles because those use a different rule that includes KBUILD_CFLAGS by default (see the __cc-option command in scripts/Kbuild.incluide). The KBUILD_CFLAGS variable already has the -Werror=unknown-warning-option flag set. Thanks to Doug for pointing out the different rule. [1] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option Cc: Peter Smith <peter.smith@linaro.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-01lib/raid6: fix unnecessary rebuild of vpermxor*.cMasahiro Yamada
The following four files are every time rebuilt: UNROLL lib/raid6/vpermxor1.c UNROLL lib/raid6/vpermxor2.c UNROLL lib/raid6/vpermxor4.c UNROLL lib/raid6/vpermxor8.c Fix the suffixes in the targets. Fixes: 72ad21075df8 ("lib/raid6: refactor unroll rules with pattern rules") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-01kbuild: modpost: do not parse unnecessary rules for vmlinux modpostMasahiro Yamada
Since commit ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod"), 'make vmlinux' emits a warning, like this: $ make defconfig vmlinux [ snip ] LD vmlinux.o cat: modules.order: No such file or directory MODPOST vmlinux.o MODINFO modules.builtin.modinfo KSYM .tmp_kallsyms1.o KSYM .tmp_kallsyms2.o LD vmlinux SORTEX vmlinux SYSMAP System.map When building only vmlinux, KBUILD_MODULES is not set. Hence, the modules.order is not generated. For the vmlinux modpost, it is not necessary at all. Separate scripts/Makefile.modpost for the vmlinux/modules stages. This works more efficiently because the vmlinux modpost does not need to include .*.cmd files. Fixes: ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-01kbuild: modpost: remove unnecessary dependency for __modpostMasahiro Yamada
__modpost is a phony target. The dependency on FORCE is pointless. All the objects have been built in the previous stage, so the dependency on the objects are not necessary either. Count the number of modules in a more straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-01kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modulesMasahiro Yamada
KBUILD_EXTRA_SYMBOLS makes sense only when building external modules. Moreover, the modpost sets 'external_module' if the -e option is given. I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...) while I was here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-01kbuild: modpost: include .*.cmd files only when targets existMasahiro Yamada
If a build rule fails, the .DELETE_ON_ERROR special target removes the target, but does nothing for the .*.cmd file, which might be corrupted. So, .*.cmd files should be included only when the corresponding targets exist. Commit 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd files") missed to fix up this file. Fixes: 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd") Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-31drm/i810: Use CONFIG_PREEMPTIONThomas Gleixner
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Change the Kconfig dependency of i810 to !CONFIG_PREEMPTION so the driver is not accidentally built on a RT kernel. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.1907262223280.1791@nanos.tec.linutronix.de
2019-07-31Merge tag 'v5.3-rc2' into drm-misc-fixesMaarten Lankhorst
Linux 5.3-rc2 Required for a CONFIG_PREEMPTION fix to i810. :) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2019-07-31nbd: replace kill_bdev() with __invalidate_device() againMunehisa Kamata
Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc03649 ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla <manoj.br@gmail.com> Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Munehisa Kamata <kamatam@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31ata: libahci: do not complain in case of deferred probeMiquel Raynal
Retrieving PHYs can defer the probe, do not spawn an error when -EPROBE_DEFER is returned, it is normal behavior. Fixes: b1a9edbda040 ("ata: libahci: allow to use multiple PHYs") Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31io_uring: fix KASAN use after free in io_sq_wq_submit_workJackie Liu
[root@localhost ~]# ./liburing/test/link QEMU Standard PC report that: [ 29.379892] CPU: 0 PID: 84 Comm: kworker/u2:2 Not tainted 5.3.0-rc2-00051-g4010b622f1d2-dirty #86 [ 29.379902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 29.379913] Workqueue: io_ring-wq io_sq_wq_submit_work [ 29.379929] Call Trace: [ 29.379953] dump_stack+0xa9/0x10e [ 29.379970] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.379986] print_address_description.cold.6+0x9/0x317 [ 29.379999] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380010] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380026] __kasan_report.cold.7+0x1a/0x34 [ 29.380044] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380061] kasan_report+0xe/0x12 [ 29.380076] io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380104] ? io_sq_thread+0xaf0/0xaf0 [ 29.380152] process_one_work+0xb59/0x19e0 [ 29.380184] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [ 29.380221] worker_thread+0x8c/0xf40 [ 29.380248] ? __kthread_parkme+0xab/0x110 [ 29.380265] ? process_one_work+0x19e0/0x19e0 [ 29.380278] kthread+0x30b/0x3d0 [ 29.380292] ? kthread_create_on_node+0xe0/0xe0 [ 29.380311] ret_from_fork+0x3a/0x50 [ 29.380635] Allocated by task 209: [ 29.381255] save_stack+0x19/0x80 [ 29.381268] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 29.381279] kmem_cache_alloc+0xc0/0x240 [ 29.381289] io_submit_sqe+0x11bc/0x1c70 [ 29.381300] io_ring_submit+0x174/0x3c0 [ 29.381311] __x64_sys_io_uring_enter+0x601/0x780 [ 29.381322] do_syscall_64+0x9f/0x4d0 [ 29.381336] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.381633] Freed by task 84: [ 29.382186] save_stack+0x19/0x80 [ 29.382198] __kasan_slab_free+0x11d/0x160 [ 29.382210] kmem_cache_free+0x8c/0x2f0 [ 29.382220] io_put_req+0x22/0x30 [ 29.382230] io_sq_wq_submit_work+0x28b/0xe90 [ 29.382241] process_one_work+0xb59/0x19e0 [ 29.382251] worker_thread+0x8c/0xf40 [ 29.382262] kthread+0x30b/0x3d0 [ 29.382272] ret_from_fork+0x3a/0x50 [ 29.382569] The buggy address belongs to the object at ffff888067172140 which belongs to the cache io_kiocb of size 224 [ 29.384692] The buggy address is located 120 bytes inside of 224-byte region [ffff888067172140, ffff888067172220) [ 29.386723] The buggy address belongs to the page: [ 29.387575] page:ffffea00019c5c80 refcount:1 mapcount:0 mapping:ffff88806ace5180 index:0x0 [ 29.387587] flags: 0x100000000000200(slab) [ 29.387603] raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806ace5180 [ 29.387617] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 29.387624] page dumped because: kasan: bad access detected [ 29.387920] Memory state around the buggy address: [ 29.388771] ffff888067172080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 29.390062] ffff888067172100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 29.391325] >ffff888067172180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 29.392578] ^ [ 29.393480] ffff888067172200: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 29.394744] ffff888067172280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 29.396003] ================================================================== [ 29.397260] Disabling lock debugging due to kernel taint io_sq_wq_submit_work free and read req again. Cc: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: f7b76ac9d17e ("io_uring: fix counter inc/dec mismatch in async_list") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31parisc: fix race condition in patching codeSven Schnelle
Assume the following ftrace code sequence that was patched in earlier by ftrace_make_call(): PAGE A: ffc: addr of ftrace_caller() PAGE B: 000: 0x6fc10080 /* stw,ma r1,40(sp) */ 004: 0x48213fd1 /* ldw -18(r1),r1 */ 008: 0xe820c002 /* bv,n r0(r1) */ 00c: 0xe83f1fdf /* b,l,n .-c,r1 */ When a Code sequences that is to be patched spans a page break, we might have already cleared the part on the PAGE A. If an interrupt is coming in during the remap of the fixed mapping to PAGE B, it might execute the patched function with only parts of the FTRACE code cleared. To prevent this, clear the jump to our mini trampoline first, and clear the remaining parts after this. This might also happen when patch_text() patches a function that it calls during remap. Signed-off-by: Sven Schnelle <svens@stackframe.org> Cc: <stable@vger.kernel.org> # 5.2+ Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-31parisc: rename default_defconfig to defconfigMasahiro Yamada
'default_defconfig' is an awkward name since 'defconfig' is the default. Let's simply say 'defconfig' like other architectures. You can drop the KBUILD_DEFCONFIG define by following the standard naming. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-31parisc: Fix fall-through warnings in fpudispatch.cHelge Deller
In fpudispatch.c we see a lot of fall-through warnings, but for this file we prefer to not mark the switches and instead keep it in it's original state as it's copied from HP-UX. Fixes: a035d552a93b ("Makefile: Globally enable fall-through warning") Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-31parisc: Mark expected switch fall-throughs in fault.cHelge Deller
Fix a fall-through warning in fault.c. Fixes: a035d552a93b ("Makefile: Globally enable fall-through warning") Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-31powerpc/kasan: fix early boot failure on PPC32Christophe Leroy
Due to commit 4a6d8cf90017 ("powerpc/mm: don't use pte_alloc_kernel() until slab is available on PPC32"), pte_alloc_kernel() cannot be used during early KASAN init. Fix it by using memblock_alloc() instead. Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/da89670093651437f27d2975224712e0a130b055.1564552796.git.christophe.leroy@c-s.fr
2019-07-31Merge tag 'iwlwifi-fixes-for-kvalo-2019-07-30' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes We have a lot of fixes, most of them are also applicable to stable. Notably: * fix use-after-free issues * fix DMA mapping API usage errors * fix frame drop occurring due to reorder buffer handling in RSS in certain conditions * fix rate scale locking issues * disable TX A-MSDU on older NICs as it causes problems and was never supposed to be supported * new PCI IDs * GEO_TX_POWER_LIMIT API issue that many people were hitting
2019-07-31drivers/macintosh/smu.c: Mark expected switch fall-throughStephen Rothwell
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: powerpc): drivers/macintosh/smu.c: In function 'smu_queue_i2c': drivers/macintosh/smu.c:854:21: warning: this statement may fall through [-Wimplicit-fallthrough=] cmd->info.devaddr &= 0xfe; ~~~~~~~~~~~~~~~~~~^~~~~~~ drivers/macintosh/smu.c:855:2: note: here case SMU_I2C_TRANSFER_STDSUB: ^~~~ Fixes: 0365ba7fb1fa ("[PATCH] ppc64: SMU driver update & i2c support") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190730143704.060a2606@canb.auug.org.au
2019-07-31mac80211: HE STA disassoc due to QOS NULL not sentShay Bar
In case of HE AP-STA link, ieee80211_send_nullfunc() will not send the QOS NULL packet to check if AP is still associated. In this case, probe_send_count will be non-zero and ieee80211_sta_work() will later disassociate the AP, even though no packet was ever sent. Fix this by decrementing probe_send_count and not calling ieee80211_send_nullfunc() in case of HE link, so that we still wait for some time for the AP beacon to reappear and don't disconnect right away. Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20190703131848.22879-1-shay.bar@celeno.com [clarify commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31mac80211: allow setting spatial reuse parameters from bss_confJohn Crispin
Store the OBSS PD parameters inside bss_conf when bringing up an AP and/or when a station connects to an AP. This allows the driver to configure the HW accordingly. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190730163701.18836-3-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31nl80211: add strict start typeJohannes Berg
Add a strict start type so all new attributes starting from NL80211_ATTR_HE_OBSS_PD are validated strictly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31cfg80211: add support for parsing OBBS_PD attributesJohn Crispin
Add the data structure, policy and parsing code allowing userland to send the OBSS PD information into the kernel. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190730163701.18836-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31mac80211: reject zero MAC address in add stationKarthikeyan Periyasamy
This came up in fuzz testing, and really we don't consider all-zeroes to be a valid MAC address in most places, so also reject it here to avoid confusion later on. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Link: https://lore.kernel.org/r/1563959770-21570-1-git-send-email-periyasa@codeaurora.org [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31cfg80211: use parallel_ops for genlJohannes Berg
Over time, we really need to get rid of all of our global locking. One of the things needed is to use parallel_ops. This isn't really the most important (RTNL is much more important) but OTOH we just keep adding uses of genl_family_attrbuf() now. Use .parallel_ops to disallow this. Reviewed-By: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190729143109.18683-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31mac80211_hwsim: fill boottime_ns in netlink RX pathJohannes Berg
Give a proper boottime_ns value for netlink RX to avoid scan issues here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20190729160605.1074-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31mac80211: add missing null return check from call to ieee80211_get_sbandColin Ian King
The return from ieee80211_get_sband can potentially be a null pointer, so it seems prudent to add a null check to avoid a null pointer dereference on sband. Addresses-Coverity: ("Dereference null return") Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190730143205.14261-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31drm/amd/powerplay: correct UVD/VCE/VCN power status retrievalEvan Quan
VCN should be used for Vega20 later ASICs while UVD and VCE are for previous ASICs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: correct Navi10 VCN powergate control (v2)Evan Quan
No VCN DPM bit check as that's different from VCN PG. Also no extra check for possible double enablement/disablement as that's already done by VCN. v2: check return value of smu_feature_set_enabled Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: support VCN powergate status retrieval for SW SMUEvan Quan
Commonly used for VCN powergate status retrieval for SW SMU. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: support VCN powergate status retrieval on RavenEvan Quan
Enable VCN powergate status report on Raven. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: add new sensor type for VCN powergate statusEvan Quan
VCN is widely used in new ASICs and different from tranditional UVD and VCE. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amdgpu: fix a potential information leaking bugWang Xiayang
Coccinelle reports a path that the array "data" is never initialized. The path skips the checks in the conditional branches when either of callback functions, read_wave_vgprs and read_wave_sgprs, is not registered. Later, the uninitialized "data" array is read in the while-loop below and passed to put_user(). Fix the path by allocating the array with kcalloc(). The patch is simplier than adding a fall-back branch that explicitly calls memset(data, 0, ...). Also it does not need the multiplication 1024*sizeof(*data) as the size parameter for memset() though there is no risk of integer overflow. Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amdgpu: fix error handling in amdgpu_cs_process_fence_depChristian König
We always need to drop the ctx reference and should check for errors first and then dereference the fence pointer. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31xen: avoid link error on ARMArnd Bergmann
Building the privcmd code as a loadable module on ARM, we get a link error due to the private cache management functions: ERROR: "__sync_icache_dcache" [drivers/xen/xen-privcmd.ko] undefined! Move the code into a new that is always built in when Xen is enabled, as suggested by Juergen Gross and Boris Ostrovsky. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-31xen/gntdev.c: Replace vm_map_pages() with vm_map_pages_zero()Souptick Joarder
'commit df9bde015a72 ("xen/gntdev.c: convert to use vm_map_pages()")' breaks gntdev driver. If vma->vm_pgoff > 0, vm_map_pages() will: - use map->pages starting at vma->vm_pgoff instead of 0 - verify map->count against vma_pages()+vma->vm_pgoff instead of just vma_pages(). In practice, this breaks using a single gntdev FD for mapping multiple grants. relevant strace output: [pid 857] ioctl(7, IOCTL_GNTDEV_MAP_GRANT_REF, 0x7ffd3407b6d0) = 0 [pid 857] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 7, 0) = 0x777f1211b000 [pid 857] ioctl(7, IOCTL_GNTDEV_SET_UNMAP_NOTIFY, 0x7ffd3407b710) = 0 [pid 857] ioctl(7, IOCTL_GNTDEV_MAP_GRANT_REF, 0x7ffd3407b6d0) = 0 [pid 857] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 7, 0x1000) = -1 ENXIO (No such device or address) details here: https://github.com/QubesOS/qubes-issues/issues/5199 The reason is -> ( copying Marek's word from discussion) vma->vm_pgoff is used as index passed to gntdev_find_map_index. It's basically using this parameter for "which grant reference to map". map struct returned by gntdev_find_map_index() describes just the pages to be mapped. Specifically map->pages[0] should be mapped at vma->vm_start, not vma->vm_start+vma->vm_pgoff*PAGE_SIZE. When trying to map grant with index (aka vma->vm_pgoff) > 1, __vm_map_pages() will refuse to map it because it will expect map->count to be at least vma_pages(vma)+vma->vm_pgoff, while it is exactly vma_pages(vma). Converting vm_map_pages() to use vm_map_pages_zero() will fix the problem. Marek has tested and confirmed the same. Cc: stable@vger.kernel.org # v5.2+ Fixes: df9bde015a72 ("xen/gntdev.c: convert to use vm_map_pages()") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-31drm/amd/powerplay: enable SW SMU reset functionalityEvan Quan
Move SMU irq handler register to sw_init as that's totally software related. Otherwise, it will prevent SMU reset working. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: fix null pointer dereference around dpm state relatesEvan Quan
DPM state relates are not supported on the new SW SMU ASICs. But still it's not OK to trigger null pointer dereference on accessing them. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amdgpu/powerplay: use proper revision id for naviAlex Deucher
The PCI revision id determines the sku. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: fix temperature granularity error in smu11Kevin Wang
in this patch, drm/amd/powerplay: add callback function of get_thermal_temperature_range the driver missed temperature granularity change on other temperature. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: add callback function of get_thermal_temperature_rangeKevin Wang
1. the thermal temperature is asic related data, move the code logic to xxx_ppt.c. 2. replace data structure PP_TemperatureRange with smu_temperature_range. 3. change temperature uint from temp*1000 to temp (temperature uint). Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Fix byte align on VegaMKent Russell
This was missed during the addition of VegaM support Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30tools: bpftool: add support for reporting the effective cgroup progsJakub Kicinski
Takshak said in the original submission: With different bpf attach_flags available to attach bpf programs specially with BPF_F_ALLOW_OVERRIDE and BPF_F_ALLOW_MULTI, the list of effective bpf-programs available to any sub-cgroups really needs to be available for easy debugging. Using BPF_F_QUERY_EFFECTIVE flag, one can get the list of not only attached bpf-programs to a cgroup but also the inherited ones from parent cgroup. So a new option is introduced to use BPF_F_QUERY_EFFECTIVE query flag here to list all the effective bpf-programs available for execution at a specified cgroup. Reused modified test program test_cgroup_attach from tools/testing/selftests/bpf: # ./test_cgroup_attach With old bpftool: # bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/ ID AttachType AttachFlags Name 271 egress multi pkt_cntr_1 272 egress multi pkt_cntr_2 Attached new program pkt_cntr_4 in cg2 gives following: # bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2 ID AttachType AttachFlags Name 273 egress override pkt_cntr_4 And with new "effective" option it shows all effective programs for cg2: # bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2 effective ID AttachType AttachFlags Name 273 egress override pkt_cntr_4 271 egress override pkt_cntr_1 272 egress override pkt_cntr_2 Compared to original submission use a local flag instead of global option. We need to clear query_flags on every command, in case batch mode wants to use varying settings. v2: (Takshak) - forbid duplicated flags; - fix cgroup path freeing. Signed-off-by: Takshak Chahande <ctakshak@fb.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Takshak Chahande <ctakshak@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30selftests/bpf: fix clearing buffered output between tests/subtestsAndrii Nakryiko
Clear buffered output once test or subtests finishes even if test was successful. Not doing this leads to accumulation of output from previous tests and on first failed tests lots of irrelevant output will be dumped, greatly confusing things. v1->v2: fix Fixes tag, add more context to patch Fixes: 3a516a0a3a7b ("selftests/bpf: add sub-tests support for test_progs") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30Merge branch 'gen-syn-cookie'Alexei Starovoitov
Petar Penkov says: ==================== This patch series introduces a BPF helper function that allows generating SYN cookies from BPF. Currently, this helper is enabled at both the TC hook and the XDP hook. The first two patches in the series add/modify several TCP helper functions to allow for SKB-less operation, as is the case at the XDP hook. The third patch introduces the bpf_tcp_gen_syncookie helper function which generates a SYN cookie for either XDP or TC programs. The return value of this function contains both the MSS value, encoded in the cookie, and the cookie itself. The last three patches sync tools/ and add a test. Performance evaluation: I sent 10Mpps to a fixed port on a host with 2 10G bonded Mellanox 4 NICs from random IPv6 source addresses. Without XDP I observed 7.2Mpps (syn-acks) being sent out if the IPv6 packets carry 20 bytes of TCP options or 7.6Mpps if they carry no options. If I attached a simple program that checks if a packet is IPv6/TCP/SYN, looks up the socket, issues a cookie, and sends it back out after swapping src/dest, recomputing the checksum, and setting the ACK flag, I observed 10Mpps being sent back out. Changes since v1: 1/ Added performance numbers to the cover letter 2/ Patch 2: Refactored a bit to fix compilation issues 3/ Patch 3: Changed ENOTSUPP to EOPNOTSUPP at Toke's suggestion Changes since RFC: 1/ Cookie is returned in host order at Alexei's suggestion 2/ If cookies are not enabled via a sysctl, the helper function returns -ENOENT instead of -EINVAL at Lorenz's suggestion 3/ Fixed documentation to properly reflect that MSS is 16 bits at Lorenz's suggestion 4/ BPF helper requires TCP length to match ->doff field, rather than to simply be no more than 20 bytes at Eric and Alexei's suggestion 5/ Packet type is looked up from the packet version field, rather than from the socket. v4 packets are rejected on v6-only sockets but should work with dual stack listeners at Eric's suggestion 6/ Removed unnecessary `net` argument from helper function in patch 2 at Lorenz's suggestion 7/ Changed test to only pass MSS option so we can convince the verifier that the memory access is not out of bounds Note that 7/ below illustrates the verifier might need to be extended to allow passing a variable tcph->doff to the helper function like below: __u32 thlen = tcph->doff * 4; if (thlen < sizeof(*tcph)) return; __s64 cookie = bpf_tcp_gen_syncookie(sk, ipv4h, 20, tcph, thlen); ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30selftests/bpf: add test for bpf_tcp_gen_syncookiePetar Penkov
Modify the existing bpf_tcp_check_syncookie test to also generate a SYN cookie, pass the packet to the kernel, and verify that the two cookies are the same (and both valid). Since cloned SKBs are skipped during generic XDP, this test does not issue a SYN cookie when run in XDP mode. We therefore only check that a valid SYN cookie was issued at the TC hook. Additionally, verify that the MSS for that SYN cookie is within expected range. Signed-off-by: Petar Penkov <ppenkov@google.com> Reviewed-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30selftests/bpf: bpf_tcp_gen_syncookie->bpf_helpersPetar Penkov
Expose bpf_tcp_gen_syncookie to selftests. Signed-off-by: Petar Penkov <ppenkov@google.com> Reviewed-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30bpf: sync bpf.h to tools/Petar Penkov
Sync updated documentation for bpf_redirect_map. Sync the bpf_tcp_gen_syncookie helper function definition with the one in tools/uapi. Signed-off-by: Petar Penkov <ppenkov@google.com> Reviewed-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30bpf: add bpf_tcp_gen_syncookie helperPetar Penkov
This helper function allows BPF programs to try to generate SYN cookies, given a reference to a listener socket. The function works from XDP and with an skb context since bpf_skc_lookup_tcp can lookup a socket in both cases. Signed-off-by: Petar Penkov <ppenkov@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-02 08:44:45 +0000