summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-21bnx2x: Fix Maximum CoS estimation for VFsYuval Mintz
bnx2x VFs do not support Multi-CoS; Current implementation erroneously sets the VFs maximal number of CoS to be > 1. This will cause the driver to call alloc_etherdev_mqs() with a number of queues it cannot possibly support and reflects in 'odd' driver prints. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacingMugunthan V N
When interrupt pacing is enabled, receive/transmit statistics are not updated properly by hardware which leads to ISR return with IRQ_NONE and inturn kernel disables the interrupt. This patch removed the checking of receive/transmit statistics from ISR. This patch is verified with AM335x Beagle Bone Black and below is the kernel warn when interrupt pacing is enabled. [ 104.298254] irq 58: nobody cared (try booting with the "irqpoll" option) [ 104.305356] CPU: 0 PID: 1073 Comm: iperf Not tainted 3.12.0-rc3-00342-g77d4015 #3 [ 104.313284] [<c001bb84>] (unwind_backtrace+0x0/0xf0) from [<c0017db0>] (show_stack+0x10/0x14) [ 104.322282] [<c0017db0>] (show_stack+0x10/0x14) from [<c0507920>] (dump_stack+0x78/0x94) [ 104.330816] [<c0507920>] (dump_stack+0x78/0x94) from [<c0088c1c>] (__report_bad_irq+0x20/0xc0) [ 104.339889] [<c0088c1c>] (__report_bad_irq+0x20/0xc0) from [<c008912c>] (note_interrupt+0x1dc/0x23c) [ 104.349505] [<c008912c>] (note_interrupt+0x1dc/0x23c) from [<c0086d74>] (handle_irq_event_percpu+0xc4/0x238) [ 104.359851] [<c0086d74>] (handle_irq_event_percpu+0xc4/0x238) from [<c0086f24>] (handle_irq_event+0x3c/0x5c) [ 104.370198] [<c0086f24>] (handle_irq_event+0x3c/0x5c) from [<c008991c>] (handle_level_irq+0xac/0x10c) [ 104.379907] [<c008991c>] (handle_level_irq+0xac/0x10c) from [<c00866d8>] (generic_handle_irq+0x20/0x30) [ 104.389812] [<c00866d8>] (generic_handle_irq+0x20/0x30) from [<c0014ce8>] (handle_IRQ+0x4c/0xb0) [ 104.399066] [<c0014ce8>] (handle_IRQ+0x4c/0xb0) from [<c000856c>] (omap3_intc_handle_irq+0x60/0x74) [ 104.408598] [<c000856c>] (omap3_intc_handle_irq+0x60/0x74) from [<c050d8e4>] (__irq_svc+0x44/0x5c) [ 104.418021] Exception stack(0xde4f7c00 to 0xde4f7c48) [ 104.423345] 7c00: 00000001 00000000 00000000 dd002140 60000013 de006e54 00000002 00000000 [ 104.431952] 7c20: de345748 00000040 c11c8588 00018ee0 00000000 de4f7c48 c009dfc8 c050d300 [ 104.440553] 7c40: 60000013 ffffffff [ 104.444237] [<c050d8e4>] (__irq_svc+0x44/0x5c) from [<c050d300>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 104.454220] [<c050d300>] (_raw_spin_unlock_irqrestore+0x34/0x44) from [<c00868c0>] (__irq_put_desc_unlock+0x14/0x38) [ 104.465295] [<c00868c0>] (__irq_put_desc_unlock+0x14/0x38) from [<c0088068>] (enable_irq+0x4c/0x74) [ 104.474829] [<c0088068>] (enable_irq+0x4c/0x74) from [<c03abd24>] (cpsw_poll+0xb8/0xdc) [ 104.483276] [<c03abd24>] (cpsw_poll+0xb8/0xdc) from [<c044ef68>] (net_rx_action+0xc0/0x1e8) [ 104.492085] [<c044ef68>] (net_rx_action+0xc0/0x1e8) from [<c0048a90>] (__do_softirq+0x100/0x27c) [ 104.501338] [<c0048a90>] (__do_softirq+0x100/0x27c) from [<c0048cd0>] (do_softirq+0x68/0x70) [ 104.510224] [<c0048cd0>] (do_softirq+0x68/0x70) from [<c0048e8c>] (local_bh_enable+0xd0/0xe4) [ 104.519211] [<c0048e8c>] (local_bh_enable+0xd0/0xe4) from [<c048c774>] (tcp_rcv_established+0x450/0x648) [ 104.529201] [<c048c774>] (tcp_rcv_established+0x450/0x648) from [<c0494904>] (tcp_v4_do_rcv+0x154/0x474) [ 104.539195] [<c0494904>] (tcp_v4_do_rcv+0x154/0x474) from [<c043d750>] (release_sock+0xac/0x1ac) [ 104.548448] [<c043d750>] (release_sock+0xac/0x1ac) from [<c04844e8>] (tcp_recvmsg+0x4d0/0xa8c) [ 104.557528] [<c04844e8>] (tcp_recvmsg+0x4d0/0xa8c) from [<c04a8720>] (inet_recvmsg+0xcc/0xf0) [ 104.566507] [<c04a8720>] (inet_recvmsg+0xcc/0xf0) from [<c0439744>] (sock_recvmsg+0x90/0xb0) [ 104.575394] [<c0439744>] (sock_recvmsg+0x90/0xb0) from [<c043b778>] (SyS_recvfrom+0x88/0xd8) [ 104.584280] [<c043b778>] (SyS_recvfrom+0x88/0xd8) from [<c043b7e0>] (sys_recv+0x18/0x20) [ 104.592805] [<c043b7e0>] (sys_recv+0x18/0x20) from [<c0013da0>] (ret_fast_syscall+0x0/0x48) [ 104.601587] handlers: [ 104.603992] [<c03acd94>] cpsw_interrupt [ 104.608040] Disabling IRQ #58 Cc: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21IB/core: Temporarily disable create_flow/destroy_flow uverbsYann Droneaud
The create_flow/destroy_flow uverbs and the associated extensions to the user-kernel verbs ABI are under review and are too experimental to freeze at this point. So userspace is not exposed to experimental features and an uinstable ABI, temporarily disable this for v3.12 (with a Kconfig option behind staging to reenable it if desired). The feature will be enabled after proper cleanup for v3.13. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1381351016.git.ydroneaud@opteya.com Link: http://marc.info/?i=cover.1381177342.git.ydroneaud@opteya.com [ Add a Kconfig option to reenable these verbs. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-21ALSA: hda - Fix typos in patch_hdmi.cTakashi Iwai
... which was introduced by the previous commit a4e9a38b, causing build errors without CONFIG_PROC_FS. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-21HID: wiimote: add LEGO-wiimote VIDDavid Herrmann
The LEGO-wiimote uses a different VID than the Nintendo ID. The device is technically the same so add the ID. Cc: <stable@vger.kernel.org> # 3.11+ Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-21ALSA: hda - add codec ID for Valleyview2 display codecMengdong Lin
This patch adds codec ID (0x80862882) and module alias for Valleyview2 display codec. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-21Merge branch 'x86_pkg_temp' of .git into for-rcZhang Rui
2013-10-21Revert "drivers: thermal: parent virtual hwmon with thermal zone"Zhang Rui
Commit b82715fdd4a5407f56853b24d387d484dd9c3b5b introduces a 'device' subdirectory under /sys/class/hwmon/hwmonX/ directory, for the thermal_zone hwmon devices. And this results in different handling by libsensors. The problem is reported and discussed in this thread http://marc.info/?l=linux-pm&m=138229306109596&w=2 This patch reverts commit b82715fdd4a5407f56853b24d387d484dd9c3b5b. Reported-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-10-20Merge branch 'parisc-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parsic fixes from Helge Deller: "There are just two small fixes in here: - Revert a commit which exported the flush_cache_page function. This was noticed by Christoph Hellwig. - Enable the DEVTMPFS, DEVTMPFS_MOUNT and BLK_DEV_INITRD config options in the parisc defconfigs so that latest udev/initrd finds the root disk at boot" * 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: enable DEVTMPFS, DEVTMPFS_MOUNT and BLK_DEV_INITRD in defconfigs Revert "parisc: Export flush_cache_page() (needed by lustre)"
2013-10-20ASoC: si476x: Fix locking of coreMark Brown
The conversion of the si476x to regmap removed locking of the core during register updates, allowing things like power state changes for the MFD to happen during a register update. Avoid this by taking the core lock in the DAI operations (which are the only things that do register updates) as we used to do in the open coded register I/O functions. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
2013-10-20ALSA: dice: restrict the driver to playback-only devicesClemens Ladisch
At the moment, this driver supports only playback, while FFADO supports (only) full-duplex devices. So, prevent conflicts by not claiming devices that would be better handled by FFADO. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: fix detection of Weiss devicesClemens Ladisch
While most DICE devices keep TCAT's default category ID of 0x04, Weiss devices identify themselves with 0x00. Reported-by: Rolf Anderegg <rolf.anderegg@weiss.ch> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: dice_proc_read: remove wrong typecastClemens Ladisch
Remove a wrong typecast that resulted from a copy-and-paste error. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: document quadlet alignmentClemens Ladisch
Doing accesses without quadlet alignment is a bad idea because the firmware's byte-swapping would garble the data; clarify this in the documentation. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: add a proc file to show device informationClemens Ladisch
For easier debugging, add a proc file to show the device's capabilities and current status. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: check clock change timeoutClemens Ladisch
Output a warning if the wait for the clock change notification times out. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: dynamic sample rate selectionClemens Ladisch
Instead of relying of some control panel application to configure some fixed sample rate, allow applications to set it automatically. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: get rate-dependent parametersClemens Ladisch
In preparation for sample rate selection support, read the stream parameters that might change when running at different sample rates. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: allow notifications during initializationClemens Ladisch
Reorganize the initialization order so that the driver can receive notifications earlier. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: get clock capabilitiesClemens Ladisch
In preparation for sample rate selection support, ensure that the driver knows about the device's clock capabilities. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: make amdtp_rates[] constClemens Ladisch
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: fix lockingStefan Richter
Avoid a lock inversion between dice->mutex and pcm->open_mutex. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: remove superfluous fieldClemens Ladisch
The pcm field was not actually used. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: remove 10s period length limitClemens Ladisch
Since commit f2b3614cefb6 (Don't check DMA time-out too shortly), we need no longer to restrict the period length to less than 10 s. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: avoid superflous write at bus resetClemens Ladisch
When a bus reset happens, the enable register is automatically cleared, so we do not need to clear it manually when stopping the stream. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: firewire: extend snd_fw_transaction()Clemens Ladisch
Add a flag to snd_fw_transaction() to allow it to abort when a bus reset happens. This removes most of the duplicated error handling loops that were required around calls to the low-level fw_run_transaction(). Also add a flag to suppress error messages; errors are expected when we attempt to clean up after the device was unplugged. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: optimize reading of consecutive registersClemens Ladisch
Instead of reading two consecutive register with two quadlet requests, use one block read request. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: support dual-wire stream format at 192 kHzClemens Ladisch
Change the AMDTP streaming code to handle the non-standard stream format that DICE devices use at sample rates greater than 96 kHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: fix device detection for other vendorsClemens Ladisch
DICE devices do not have a unique specifier ID in their unit directory (it's always the same as the device vendor's ID), so rely on just the version ID for driver loading, and use a heuristic in the probe callback to detect actual DICE devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: reorganize interface definitionsClemens Ladisch
Move the DICE interface symbols into a separate header file, and add more documentation. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: firewire: introduce amdtp_out_stream_running()Clemens Ladisch
Introduce the helper function amdtp_out_stream_running(). This makes many checks in amdtp.c clearer and frees the device drivers from having to track this with a separate variable. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: clear device lock when closing hwdep deviceClemens Ladisch
Ensure that misbehaving or aborted userspace programs do not accidentally keep the lock. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: implement hwdep deviceClemens Ladisch
Implement the hwdep locking and notification mechanisms. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: fix hang when unplugging a running deviceClemens Ladisch
When aborting a PCM stream, the xrun is signaled only if the stream is running. When disconnecting a PCM stream, calling snd_card_disconnect() too early would change the stream into a non-running state and thus prevent the xrun from being noticed by user space. To prevent this, move the snd_card_disconnect() call after the xrun. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice, firewire-lib: add blocking modeClemens Ladisch
Allow AMDTP output streams to use blocking mode. Use it for DICE devices, because the old DICE-II chip will in some cases not be able to lock to non-blocking streams (erratum E7). Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: reduce noisy loggingClemens Ladisch
The notification bits are not of general interest; log them only when debugging. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: allow all sample ratesClemens Ladisch
Instead of forcing a constant 44.1 kHz, read the current sample rate from the device when opening the PCM device. Actually changing the sample rate requires some separate controller application. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: optimize bus reset handlingClemens Ladisch
After a bus reset, do not stop the stream completely to avoid having to reconfigure the device when restarting the stream. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ASoC: cs42l73: Add Device Tree support for CS42L73Brian Austin
This patch adds support for device tree for the CS42L73 CODEC Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-20ASoC: kirkwood: prefer external clock over internal clockJean-Francois Moine
When there is an external clock, always use this one. This prevents the two Dove audio devices to use the same DCO clock at different rates. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-20ASoC: rcar: remove RSND_SSI_CLK_FROM_ADGKuninori Morimoto
R-Car sound has clock pin for each SSI, and sometimes, these pins are shared with paired SSI. It may sometimes become "SSI-A clock pin is master" and "SSI-B clock pin is slave", but "SSI-A/B clock pins are shared". SSI-B needs SSI-A clock in this case. Current R-Car sound driver is using RSND_SSI_xxx flag to control this kind of shared pin behavior. But, this information, especially clock master setting, can be got from ASoC set_fmt settings. This patch removes rsnd_ssi_mode_init() and extend rsnd_ssi_mode_set() to controlling pin settings via .set_fmt. This patch doesn't removes RSND_SSI_CLK_FROM_ADG flag at this point to avoid conflict branch merging between ASoC <-> SH-ARM. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-20ASoC: rcar: add rsnd_scu_hpbif_is_enable()Kuninori Morimoto
Current SSI needs RSND_SSI_DEPENDENT flag to decide dependent/independent mode. And SCU needs RSND_SCU_USE_HPBIF flag to decide HPBIF is enable/disable. But these 2 means same things. This patch adds new rsnd_scu_hpbif_is_enable() function, and merges above methods. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-20ASoC: simple-card: un-implemented set_fmt is not errorKuninori Morimoto
Current simple-card returns error if DAI doesn't support .set_fmt callback. But the error is -ENOTSUPP (= not supported), and it is not error. This patch avoids such case Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-20ASoC: samsung: Initialise DMA data at device probe timeMark Brown
This is a minor simplification and will help with converting the platform to use the dmaengine helpers. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-20ASoC: dai: Provide interface for setting DMA data at probe timeMark Brown
Allow DMA data to be set at probe time for devices that can do that, avoiding the need to do it every time we start a stream and supporting non-DT dmaengine users using the helpers. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-20nfsd regression since delayed fput()Al Viro
Background: nfsd v[23] had throughput regression since delayed fput went in; every read or write ends up doing fput() and we get a pair of extra context switches out of that (plus quite a bit of work in queue_work itselfi, apparently). Use of schedule_delayed_work() gives it a chance to accumulate a bit before we do __fput() on all of them. I'm not too happy about that solution, but... on at least one real-world setup it reverts about 10% throughput loss we got from switch to delayed fput. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-20Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: " * Fix build error on Fedora 12. * Fix to initialize fname always before use it, bug introduced during this merge window, from Masami Hiramatsu. * Disable PERF_RECORD_MMAP2 support, from Stephane Eranian. " Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-19Merge branch 'ufo_fixes'David S. Miller
Jiri Pirko says: ==================== UFO fixes Couple of patches fixing UFO functionality in different situations. v1->v2: - minor if{}else{} coding style adjustment suggested by Sergei Shtylyov ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19ip_output: do skb ufo init for peeked non ufo skb as wellJiri Pirko
Now, if user application does: sendto len<mtu flag MSG_MORE sendto len>mtu flag 0 The skb is not treated as fragmented one because it is not initialized that way. So move the initialization to fix this. introduced by: commit e89e9cf539a28df7d0eb1d0a545368e9920b34ac "[IPv4/IPv6]: UFO Scatter-gather approach" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19ip6_output: do skb ufo init for peeked non ufo skb as wellJiri Pirko
Now, if user application does: sendto len<mtu flag MSG_MORE sendto len>mtu flag 0 The skb is not treated as fragmented one because it is not initialized that way. So move the initialization to fix this. introduced by: commit e89e9cf539a28df7d0eb1d0a545368e9920b34ac "[IPv4/IPv6]: UFO Scatter-gather approach" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-29 05:55:57 +0000